Merge tag 'staging-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here's some staging and IIO driver fixes for 4.2-rc3.

  Nothing major, the majority are IIO issues that were reported, with a
  few other minor staging driver fixes.  All have been in linux-next for
  a while with no reported issues"

* tag 'staging-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits)
  staging: vt6656: check ieee80211_bss_conf bssid not NULL
  staging: vt6655: check ieee80211_bss_conf bssid not NULL
  staging:lustre: remove irq.h from socklnd.h
  staging: make board support depend on OF_IRQ and CLKDEV_LOOKUP
  iio: tmp006: Check channel info on write
  iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able()
  iio:light:ltr501: fix regmap dependency
  iio:light:ltr501: fix variable in ltr501_init
  iio: sx9500: fix bug in compensation code
  iio: sx9500: rework error handling of raw readings
  iio: magnetometer: mmc35240: fix available sampling frequencies
  iio:light:stk3310: Fix REGMAP_I2C dependency
  iio: light: STK3310: un-invert proximity values
  iio:adc:cc10001_adc: fix Kconfig dependency
  iio: light: tcs3414: Fix bug preventing to set integration time
  iio:accel:bmc150-accel: fix counting direction
  iio:light:cm3323: clear bitmask before set
  iio: adc: at91_adc: allow to use full range of startup time
  iio: DAC: ad5624r_spi: fix bit shift of output data value
  iio: proximity: sx9500: Fix proximity value
  ...

22 files changed, 109 insertions, 85 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index bbed111..70c9b1a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1234,10 +1234,8 @@ Description:
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index 4e70f51..cc5a357 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -1464,7 +1464,7 @@ static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data,
 {
 	int i;
 
-	for (i = from; i >= 0; i++) {
+	for (i = from; i >= 0; i--) {
 		if (data->triggers[i].indio_trig) {
 			iio_trigger_unregister(data->triggers[i].indio_trig);
 			data->triggers[i].indio_trig = NULL;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7c55658..eb0cd89 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -153,8 +153,7 @@ config DA9150_GPADC
 
 config CC10001_ADC
 	tristate "Cosmic Circuits 10001 ADC driver"
-	depends on HAVE_CLK || REGULATOR
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 8a0eb4a..7b40925 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -182,7 +182,7 @@ struct at91_adc_caps {
 	u8	ts_pen_detect_sensitivity;
 
 	/* startup time calculate function */
-	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
+	u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz);
 
 	u8	num_channels;
 	struct at91_adc_reg_desc registers;
@@ -201,7 +201,7 @@ struct at91_adc_state {
 	u8			num_channels;
 	void __iomem		*reg_base;
 	struct at91_adc_reg_desc *registers;
-	u8			startup_time;
+	u32			startup_time;
 	u8			sample_hold_time;
 	bool			sleep_mode;
 	struct iio_trigger	**trig;
@@ -779,7 +779,7 @@ ret:
 	return ret;
 }
 
-static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * Number of ticks needed to cover the startup time of the ADC
@@ -790,7 +790,7 @@ static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
 	return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8;
 }
 
-static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * For sama5d3x and at91sam9x5, the formula changes to:
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index 8d4e019..9c311c1 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -349,3 +349,7 @@ static struct platform_driver rockchip_saradc_driver = {
 };
 
 module_platform_driver(rockchip_saradc_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Rockchip SARADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 06f4792..ebe415f 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -833,7 +833,8 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				   twl4030_madc_threaded_irq_handler,
-				   IRQF_TRIGGER_RISING, "twl4030_madc", madc);
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "twl4030_madc", madc);
 	if (ret) {
 		dev_err(&pdev->dev, "could not request irq\n");
 		goto err_i2c;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 610fc98..5955110 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -36,6 +36,8 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 	s32 poll_value = 0;
 
 	if (state) {
+		if (!atomic_read(&st->user_requested_state))
+			return 0;
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
 
@@ -52,8 +54,12 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 
 		poll_value = hid_sensor_read_poll_value(st);
 	} else {
-		if (!atomic_dec_and_test(&st->data_ready))
+		int val;
+
+		val = atomic_dec_if_positive(&st->data_ready);
+		if (val < 0)
 			return 0;
+
 		sensor_hub_device_close(st->hsdev);
 		state_val = hid_sensor_get_usage_index(st->hsdev,
 			st->power_state.report_id,
@@ -92,9 +98,11 @@ EXPORT_SYMBOL(hid_sensor_power_state);
 
 int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 {
+
 #ifdef CONFIG_PM
 	int ret;
 
+	atomic_set(&st->user_requested_state, state);
 	if (state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {
@@ -109,6 +117,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 
  	return 0;
 #else
+	atomic_set(&st->user_requested_state, state);
 	return _hid_sensor_power_state(st, state);
 #endif
 }
diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 61bb9d4..e98428d 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -22,7 +22,7 @@
 #include "ad5624r.h"
 
 static int ad5624r_spi_write(struct spi_device *spi,
-			     u8 cmd, u8 addr, u16 val, u8 len)
+			     u8 cmd, u8 addr, u16 val, u8 shift)
 {
 	u32 data;
 	u8 msg[3];
@@ -35,7 +35,7 @@ static int ad5624r_spi_write(struct spi_device *spi,
 	 * 14-, 12-bit input code followed by 0, 2, or 4 don't care bits,
 	 * for the AD5664R, AD5644R, and AD5624R, respectively.
 	 */
-	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << (16 - len));
+	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift);
 	msg[0] = data >> 16;
 	msg[1] = data >> 8;
 	msg[2] = data;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 17d4bb1..65ce868 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -431,6 +431,23 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val)
 	return -EINVAL;
 }
 
+static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
 static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
 {
 	int result, i;
@@ -696,6 +713,7 @@ static const struct iio_info mpu_info = {
 	.driver_module = THIS_MODULE,
 	.read_raw = &inv_mpu6050_read_raw,
 	.write_raw = &inv_mpu6050_write_raw,
+	.write_raw_get_fmt = &inv_write_raw_get_fmt,
 	.attrs = &inv_attribute_group,
 	.validate_trigger = inv_mpu6050_validate_trigger,
 };
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index e6198b7..a5c5925 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -188,6 +188,7 @@ config SENSORS_LM3533
 config LTR501
 	tristate "LTR-501ALS-01 light sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -201,6 +202,7 @@ config LTR501
 config STK3310
 	tristate "STK3310 ALS and proximity sensor"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say yes here to get support for the Sensortek STK3310 ambient light
 	 and proximity sensor. The STK3311 model is also supported by this
diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c
index 869033e..a1d4905 100644
--- a/drivers/iio/light/cm3323.c
+++ b/drivers/iio/light/cm3323.c
@@ -123,7 +123,7 @@ static int cm3323_set_it_bits(struct cm3323_data *data, int val, int val2)
 	for (i = 0; i < ARRAY_SIZE(cm3323_int_time); i++) {
 		if (val == cm3323_int_time[i].val &&
 		    val2 == cm3323_int_time[i].val2) {
-			reg_conf = data->reg_conf;
+			reg_conf = data->reg_conf & ~CM3323_CONF_IT_MASK;
 			reg_conf |= i << CM3323_CONF_IT_SHIFT;
 
 			ret = i2c_smbus_write_word_data(data->client,
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 1ef7d37..b5a0e66 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1302,7 +1302,7 @@ static int ltr501_init(struct ltr501_data *data)
 	if (ret < 0)
 		return ret;
 
-	data->als_contr = ret | data->chip_info->als_mode_active;
+	data->als_contr = status | data->chip_info->als_mode_active;
 
 	ret = regmap_read(data->regmap, LTR501_PS_CONTR, &status);
 	if (ret < 0)
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index fee4297..c1a2182 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -43,7 +43,6 @@
 #define STK3311_CHIP_ID_VAL			0x1D
 #define STK3310_PSINT_EN			0x01
 #define STK3310_PS_MAX_VAL			0xFFFF
-#define STK3310_THRESH_MAX			0xFFFF
 
 #define STK3310_DRIVER_NAME			"stk3310"
 #define STK3310_REGMAP_NAME			"stk3310_regmap"
@@ -84,15 +83,13 @@ static const struct reg_field stk3310_reg_field_flag_psint =
 				REG_FIELD(STK3310_REG_FLAG, 4, 4);
 static const struct reg_field stk3310_reg_field_flag_nf =
 				REG_FIELD(STK3310_REG_FLAG, 0, 0);
-/*
- * Maximum PS values with regard to scale. Used to export the 'inverse'
- * PS value (high values for far objects, low values for near objects).
- */
+
+/* Estimate maximum proximity values with regard to measurement scale. */
 static const int stk3310_ps_max[4] = {
-	STK3310_PS_MAX_VAL / 64,
-	STK3310_PS_MAX_VAL / 16,
-	STK3310_PS_MAX_VAL /  4,
-	STK3310_PS_MAX_VAL,
+	STK3310_PS_MAX_VAL / 640,
+	STK3310_PS_MAX_VAL / 160,
+	STK3310_PS_MAX_VAL /  40,
+	STK3310_PS_MAX_VAL /  10
 };
 
 static const int stk3310_scale_table[][2] = {
@@ -128,14 +125,14 @@ static const struct iio_event_spec stk3310_events[] = {
 	/* Proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_FALLING,
+		.dir = IIO_EV_DIR_RISING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
 	/* Out-of-proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_RISING,
+		.dir = IIO_EV_DIR_FALLING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
@@ -205,23 +202,16 @@ static int stk3310_read_event(struct iio_dev *indio_dev,
 	u8 reg;
 	u16 buf;
 	int ret;
-	unsigned int index;
 	struct stk3310_data *data = iio_priv(indio_dev);
 
 	if (info != IIO_EV_INFO_VALUE)
 		return -EINVAL;
 
-	/*
-	 * Only proximity interrupts are implemented at the moment.
-	 * Since we're inverting proximity values, the sensor's 'high'
-	 * threshold will become our 'low' threshold, associated with
-	 * 'near' events. Similarly, the sensor's 'low' threshold will
-	 * be our 'high' threshold, associated with 'far' events.
-	 */
+	/* Only proximity interrupts are implemented at the moment. */
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
@@ -232,8 +222,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev,
 		dev_err(&data->client->dev, "register read failed\n");
 		return ret;
 	}
-	regmap_field_read(data->reg_ps_gain, &index);
-	*val = swab16(stk3310_ps_max[index] - buf);
+	*val = swab16(buf);
 
 	return IIO_VAL_INT;
 }
@@ -257,13 +246,13 @@ static int stk3310_write_event(struct iio_dev *indio_dev,
 		return -EINVAL;
 
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
-	buf = swab16(stk3310_ps_max[index] - val);
+	buf = swab16(val);
 	ret = regmap_bulk_write(data->regmap, reg, &buf, 2);
 	if (ret < 0)
 		dev_err(&client->dev, "failed to set PS threshold!\n");
@@ -334,14 +323,6 @@ static int stk3310_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		}
 		*val = swab16(buf);
-		if (chan->type == IIO_PROXIMITY) {
-			/*
-			 * Invert the proximity data so we return low values
-			 * for close objects and high values for far ones.
-			 */
-			regmap_field_read(data->reg_ps_gain, &index);
-			*val = stk3310_ps_max[index] - *val;
-		}
 		mutex_unlock(&data->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_INT_TIME:
@@ -581,8 +562,8 @@ static irqreturn_t stk3310_irq_event_handler(int irq, void *private)
 	}
 	event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
 				     IIO_EV_TYPE_THRESH,
-				     (dir ? IIO_EV_DIR_RISING :
-					    IIO_EV_DIR_FALLING));
+				     (dir ? IIO_EV_DIR_FALLING :
+					    IIO_EV_DIR_RISING));
 	iio_push_event(indio_dev, event, data->timestamp);
 
 	/* Reset the interrupt flag */
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 71c2bde..f8b1df0 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -185,7 +185,7 @@ static int tcs3414_write_raw(struct iio_dev *indio_dev,
 		if (val != 0)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(tcs3414_times); i++) {
-			if (val == tcs3414_times[i] * 1000) {
+			if (val2 == tcs3414_times[i] * 1000) {
 				data->timing &= ~TCS3414_INTEG_MASK;
 				data->timing |= i;
 				return i2c_smbus_write_byte_data(
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 7a2ea71..d927397 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -84,10 +84,10 @@
 #define MMC35240_OTP_START_ADDR		0x1B
 
 enum mmc35240_resolution {
-	MMC35240_16_BITS_SLOW = 0, /* 100 Hz */
-	MMC35240_16_BITS_FAST,     /* 200 Hz */
-	MMC35240_14_BITS,          /* 333 Hz */
-	MMC35240_12_BITS,          /* 666 Hz */
+	MMC35240_16_BITS_SLOW = 0, /* 7.92 ms */
+	MMC35240_16_BITS_FAST,     /* 4.08 ms */
+	MMC35240_14_BITS,          /* 2.16 ms */
+	MMC35240_12_BITS,          /* 1.20 ms */
 };
 
 enum mmc35240_axis {
@@ -100,22 +100,22 @@ static const struct {
 	int sens[3]; /* sensitivity per X, Y, Z axis */
 	int nfo; /* null field output */
 } mmc35240_props_table[] = {
-	/* 16 bits, 100Hz ODR */
+	/* 16 bits, 125Hz ODR */
 	{
 		{1024, 1024, 1024},
 		32768,
 	},
-	/* 16 bits, 200Hz ODR */
+	/* 16 bits, 250Hz ODR */
 	{
 		{1024, 1024, 770},
 		32768,
 	},
-	/* 14 bits, 333Hz ODR */
+	/* 14 bits, 450Hz ODR */
 	{
 		{256, 256, 193},
 		8192,
 	},
-	/* 12 bits, 666Hz ODR */
+	/* 12 bits, 800Hz ODR */
 	{
 		{64, 64, 48},
 		2048,
@@ -133,9 +133,15 @@ struct mmc35240_data {
 	int axis_scale[3];
 };
 
-static const int mmc35240_samp_freq[] = {100, 200, 333, 666};
+static const struct {
+	int val;
+	int val2;
+} mmc35240_samp_freq[] = { {1, 500000},
+			   {13, 0},
+			   {25, 0},
+			   {50, 0} };
 
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 333 666");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1.5 13 25 50");
 
 #define MMC35240_CHANNEL(_axis) { \
 	.type = IIO_MAGN, \
@@ -168,7 +174,8 @@ static int mmc35240_get_samp_freq_index(struct mmc35240_data *data,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mmc35240_samp_freq); i++)
-		if (mmc35240_samp_freq[i] == val)
+		if (mmc35240_samp_freq[i].val == val &&
+		    mmc35240_samp_freq[i].val2 == val2)
 			return i;
 	return -EINVAL;
 }
@@ -378,9 +385,9 @@ static int mmc35240_read_raw(struct iio_dev *indio_dev,
 		if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq))
 			return -EINVAL;
 
-		*val = mmc35240_samp_freq[i];
-		*val2 = 0;
-		return IIO_VAL_INT;
+		*val = mmc35240_samp_freq[i].val;
+		*val2 = mmc35240_samp_freq[i].val2;
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 2042e37..3d756bd 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -80,6 +80,7 @@
 #define SX9500_COMPSTAT_MASK		GENMASK(3, 0)
 
 #define SX9500_NUM_CHANNELS		4
+#define SX9500_CHAN_MASK		GENMASK(SX9500_NUM_CHANNELS - 1, 0)
 
 struct sx9500_data {
 	struct mutex mutex;
@@ -281,7 +282,7 @@ static int sx9500_read_prox_data(struct sx9500_data *data,
 	if (ret < 0)
 		return ret;
 
-	*val = 32767 - (s16)be16_to_cpu(regval);
+	*val = be16_to_cpu(regval);
 
 	return IIO_VAL_INT;
 }
@@ -329,27 +330,29 @@ static int sx9500_read_proximity(struct sx9500_data *data,
 	else
 		ret = sx9500_wait_for_sample(data);
 
-	if (ret < 0)
-		return ret;
-
 	mutex_lock(&data->mutex);
 
-	ret = sx9500_read_prox_data(data, chan, val);
 	if (ret < 0)
-		goto out;
+		goto out_dec_data_rdy;
 
-	ret = sx9500_dec_chan_users(data, chan->channel);
+	ret = sx9500_read_prox_data(data, chan, val);
 	if (ret < 0)
-		goto out;
+		goto out_dec_data_rdy;
 
 	ret = sx9500_dec_data_rdy_users(data);
 	if (ret < 0)
+		goto out_dec_chan;
+
+	ret = sx9500_dec_chan_users(data, chan->channel);
+	if (ret < 0)
 		goto out;
 
 	ret = IIO_VAL_INT;
 
 	goto out;
 
+out_dec_data_rdy:
+	sx9500_dec_data_rdy_users(data);
 out_dec_chan:
 	sx9500_dec_chan_users(data, chan->channel);
 out:
@@ -679,7 +682,7 @@ out:
 static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct sx9500_data *data = iio_priv(indio_dev);
-	int ret, i;
+	int ret = 0, i;
 
 	mutex_lock(&data->mutex);
 
@@ -703,7 +706,7 @@ static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
 static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct sx9500_data *data = iio_priv(indio_dev);
-	int ret, i;
+	int ret = 0, i;
 
 	iio_triggered_buffer_predisable(indio_dev);
 
@@ -800,8 +803,7 @@ static int sx9500_init_compensation(struct iio_dev *indio_dev)
 	unsigned int val;
 
 	ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
-				 GENMASK(SX9500_NUM_CHANNELS, 0),
-				 GENMASK(SX9500_NUM_CHANNELS, 0));
+				 SX9500_CHAN_MASK, SX9500_CHAN_MASK);
 	if (ret < 0)
 		return ret;
 
@@ -821,7 +823,7 @@ static int sx9500_init_compensation(struct iio_dev *indio_dev)
 
 out:
 	regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
-			   GENMASK(SX9500_NUM_CHANNELS, 0), 0);
+			   SX9500_CHAN_MASK, 0);
 	return ret;
 }
 
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index fcc49f8..8f21f32 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -132,6 +132,9 @@ static int tmp006_write_raw(struct iio_dev *indio_dev,
 	struct tmp006_data *data = iio_priv(indio_dev);
 	int i;
 
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
 	for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
 		if ((val == tmp006_freqs[i][0]) &&
 		    (val2 == tmp006_freqs[i][1])) {
diff --git a/drivers/staging/board/Kconfig b/drivers/staging/board/Kconfig
index b8ee818..3f287c4 100644
--- a/drivers/staging/board/Kconfig
+++ b/drivers/staging/board/Kconfig
@@ -1,6 +1,6 @@
 config STAGING_BOARD
 	bool "Staging Board Support"
-	depends on OF_ADDRESS
+	depends on OF_ADDRESS && OF_IRQ && CLKDEV_LOOKUP
 	help
 	  Select to enable per-board staging support code.
 
diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
index 7125eb9..8a9d4a0 100644
--- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
+++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.h
@@ -31,7 +31,6 @@
 #define DEBUG_PORTAL_ALLOC
 #define DEBUG_SUBSYSTEM S_LND
 
-#include <asm/irq.h>
 #include <linux/crc32.h>
 #include <linux/errno.h>
 #include <linux/if.h>
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index ed040fb..b0c8e23 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1418,7 +1418,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
 
 	priv->current_aid = conf->aid;
 
-	if (changed & BSS_CHANGED_BSSID) {
+	if (changed & BSS_CHANGED_BSSID && conf->bssid) {
 		unsigned long flags;
 
 		spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index f97323f..af572d7 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -701,7 +701,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
 
 	priv->current_aid = conf->aid;
 
-	if (changed & BSS_CHANGED_BSSID)
+	if (changed & BSS_CHANGED_BSSID && conf->bssid)
 		vnt_mac_set_bssid_addr(priv, (u8 *)conf->bssid);
 
 
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 0042bf3..c02b5ce 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -230,6 +230,7 @@ struct hid_sensor_common {
 	struct platform_device *pdev;
 	unsigned usage_id;
 	atomic_t data_ready;
+	atomic_t user_requested_state;
 	struct iio_trigger *trigger;
 	struct hid_sensor_hub_attribute_info poll;
 	struct hid_sensor_hub_attribute_info report_state;