diff options
author | Hanumath Prasad <hanumath.prasad@stericsson.com> | 2010-09-30 17:37:23 -0400 |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2010-10-23 21:11:16 +0800 |
commit | dfc13e8402c75e7c2e0a52e123c0500a3259866b (patch) | |
tree | 29a0f5daeb300da027bb0ed9c042fffd214b078f | |
parent | 99fc5131018cbdc3cf42ce09fb394a4e8b053c74 (diff) | |
download | op-kernel-dev-dfc13e8402c75e7c2e0a52e123c0500a3259866b.zip op-kernel-dev-dfc13e8402c75e7c2e0a52e123c0500a3259866b.tar.gz |
mmc: MMC 4.4 DDR support
Add support for Dual Data Rate MMC cards as defined in the 4.4
specification.
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Cc: linux-mmc@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Tested-by Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
-rw-r--r-- | drivers/mmc/card/block.c | 10 | ||||
-rw-r--r-- | drivers/mmc/core/mmc.c | 37 | ||||
-rw-r--r-- | include/linux/mmc/card.h | 4 | ||||
-rw-r--r-- | include/linux/mmc/core.h | 1 | ||||
-rw-r--r-- | include/linux/mmc/host.h | 4 | ||||
-rw-r--r-- | include/linux/mmc/mmc.h | 10 |
6 files changed, 60 insertions, 6 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 759a105..aab5934 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -373,7 +373,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) readcmd = MMC_READ_SINGLE_BLOCK; writecmd = MMC_WRITE_BLOCK; } - + if (mmc_card_ddr_mode(card)) + brq.data.flags |= MMC_DDR_MODE; if (rq_data_dir(req) == READ) { brq.cmd.opcode = readcmd; brq.data.flags |= MMC_DATA_READ; @@ -655,8 +656,11 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) struct mmc_command cmd; int err; - /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ - if (mmc_card_blockaddr(card)) + /* + * Block-addressed and ddr mode supported cards + * ignore MMC_SET_BLOCKLEN. + */ + if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) return 0; mmc_claim_host(card->host); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 6570c03..66c4a59 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -258,6 +258,21 @@ static int mmc_read_ext_csd(struct mmc_card *card) } switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { + case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | + EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 52000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_52; + break; + case EXT_CSD_CARD_TYPE_DDR_1_2V | EXT_CSD_CARD_TYPE_52 | + EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 52000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_2V; + break; + case EXT_CSD_CARD_TYPE_DDR_1_8V | EXT_CSD_CARD_TYPE_52 | + EXT_CSD_CARD_TYPE_26: + card->ext_csd.hs_max_dtr = 52000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_8V; + break; case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: card->ext_csd.hs_max_dtr = 52000000; break; @@ -503,6 +518,18 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, mmc_set_clock(host, max_dtr); /* + * Activate DDR50 mode (if supported). + */ + if (mmc_card_highspeed(card)) { + if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) + && (host->caps & (MMC_CAP_1_8V_DDR))) + mmc_card_set_ddr_mode(card); + else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) + && (host->caps & (MMC_CAP_1_2V_DDR))) + mmc_card_set_ddr_mode(card); + } + + /* * Activate wide bus (if supported). */ if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && @@ -510,10 +537,16 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, unsigned ext_csd_bit, bus_width; if (host->caps & MMC_CAP_8_BIT_DATA) { - ext_csd_bit = EXT_CSD_BUS_WIDTH_8; + if (mmc_card_ddr_mode(card)) + ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8; + else + ext_csd_bit = EXT_CSD_BUS_WIDTH_8; bus_width = MMC_BUS_WIDTH_8; } else { - ext_csd_bit = EXT_CSD_BUS_WIDTH_4; + if (mmc_card_ddr_mode(card)) + ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bit = EXT_CSD_BUS_WIDTH_4; bus_width = MMC_BUS_WIDTH_4; } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 7bd4923..8ce0827 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -48,6 +48,7 @@ struct mmc_ext_csd { unsigned int sa_timeout; /* Units: 100ns */ unsigned int hs_max_dtr; unsigned int sectors; + unsigned int card_type; unsigned int hc_erase_size; /* In sectors */ unsigned int hc_erase_timeout; /* In milliseconds */ unsigned int sec_trim_mult; /* Secure trim multiplier */ @@ -113,6 +114,7 @@ struct mmc_card { #define MMC_STATE_READONLY (1<<1) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ +#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -154,11 +156,13 @@ struct mmc_card { #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) +#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) +#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) static inline int mmc_card_lenient_fn0(const struct mmc_card *c) { diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 7429033..d0fbcac 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -109,6 +109,7 @@ struct mmc_data { #define MMC_DATA_WRITE (1 << 8) #define MMC_DATA_READ (1 << 9) #define MMC_DATA_STREAM (1 << 10) +#define MMC_DDR_MODE (1 << 11) unsigned int bytes_xfered; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ccac56a..6711eb8 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -158,6 +158,10 @@ struct mmc_host { #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ +#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */ + /* DDR mode at 1.8V */ +#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ + /* DDR mode at 1.2V */ mmc_pm_flag_t pm_caps; /* supported pm features */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index dd11ae5..956fbd87 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -277,11 +277,19 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */ +#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ + /* DDR mode @1.8V or 3V I/O */ +#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ + /* DDR mode @1.2V I/O */ +#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ + | EXT_CSD_CARD_TYPE_DDR_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ +#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) |