summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>2012-04-09 19:03:58 +0530
committerKalle Valo <kvalo@qca.qualcomm.com>2012-04-09 18:25:56 +0300
commitdf90b36940019a879d08bc5e8a20daa0c9fe0122 (patch)
tree0be946d8ad4042097b20295cfc806ae6d10a1c5d
parentbed56e313ada1d25d16e4101677c8f75eda78c60 (diff)
downloadop-kernel-dev-df90b36940019a879d08bc5e8a20daa0c9fe0122.zip
op-kernel-dev-df90b36940019a879d08bc5e8a20daa0c9fe0122.tar.gz
ath6kl: Configure htcap in fw based on the channel type in AP mode
This patch disables HT in start_ap if the type of the channel on which the AP mode is going to be operating is non-HT. HT is enabled with default ht cap setting if the operating channel is going to be 11n. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-rw-r--r--drivers/net/wireless/ath/ath6kl/cfg80211.c77
-rw-r--r--drivers/net/wireless/ath/ath6kl/common.h1
-rw-r--r--drivers/net/wireless/ath/ath6kl/core.h9
-rw-r--r--drivers/net/wireless/ath/ath6kl/wmi.c37
-rw-r--r--drivers/net/wireless/ath/ath6kl/wmi.h13
5 files changed, 116 insertions, 21 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 1229ce9..9009930 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2424,31 +2424,25 @@ void ath6kl_check_wow_status(struct ath6kl *ar)
}
#endif
-static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band,
+ bool ht_enable)
{
- struct ath6kl_vif *vif;
-
- /*
- * 'dev' could be NULL if a channel change is required for the hardware
- * device itself, instead of a particular VIF.
- *
- * FIXME: To be handled properly when monitor mode is supported.
- */
- if (!dev)
- return -EBUSY;
-
- vif = netdev_priv(dev);
+ struct ath6kl_htcap *htcap = &vif->htcap;
- if (!ath6kl_cfg80211_ready(vif))
- return -EIO;
+ if (htcap->ht_enable == ht_enable)
+ return 0;
- ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: center_freq=%u hw_value=%u\n",
- __func__, chan->center_freq, chan->hw_value);
- vif->next_chan = chan->center_freq;
+ if (ht_enable) {
+ /* Set default ht capabilities */
+ htcap->ht_enable = true;
+ htcap->cap_info = (band == IEEE80211_BAND_2GHZ) ?
+ ath6kl_g_htcap : ath6kl_a_htcap;
+ htcap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K;
+ } else /* Disable ht */
+ memset(htcap, 0, sizeof(*htcap));
- return 0;
+ return ath6kl_wmi_set_htcap_cmd(vif->ar->wmi, vif->fw_vif_idx,
+ band, htcap);
}
static bool ath6kl_is_p2p_ie(const u8 *pos)
@@ -2525,6 +2519,35 @@ static int ath6kl_set_ies(struct ath6kl_vif *vif,
return 0;
}
+static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
+{
+ struct ath6kl_vif *vif;
+
+ /*
+ * 'dev' could be NULL if a channel change is required for the hardware
+ * device itself, instead of a particular VIF.
+ *
+ * FIXME: To be handled properly when monitor mode is supported.
+ */
+ if (!dev)
+ return -EBUSY;
+
+ vif = netdev_priv(dev);
+
+ if (!ath6kl_cfg80211_ready(vif))
+ return -EIO;
+
+ ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: center_freq=%u hw_value=%u\n",
+ __func__, chan->center_freq, chan->hw_value);
+ vif->next_chan = chan->center_freq;
+ vif->next_ch_type = channel_type;
+ vif->next_ch_band = chan->band;
+
+ return 0;
+}
+
static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ap_settings *info)
{
@@ -2673,6 +2696,10 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
return res;
}
+ if (ath6kl_set_htcap(vif, vif->next_ch_band,
+ vif->next_ch_type != NL80211_CHAN_NO_HT))
+ return -EIO;
+
res = ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx, &p);
if (res < 0)
return res;
@@ -2707,6 +2734,13 @@ static int ath6kl_stop_ap(struct wiphy *wiphy, struct net_device *dev)
ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
clear_bit(CONNECTED, &vif->flags);
+ /* Restore ht setting in firmware */
+ if (ath6kl_set_htcap(vif, IEEE80211_BAND_2GHZ, true))
+ return -EIO;
+
+ if (ath6kl_set_htcap(vif, IEEE80211_BAND_5GHZ, true))
+ return -EIO;
+
return 0;
}
@@ -3252,6 +3286,7 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
vif->next_mode = nw_type;
vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL;
vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME;
+ vif->htcap.ht_enable = true;
memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
if (fw_vif_idx != 0)
diff --git a/drivers/net/wireless/ath/ath6kl/common.h b/drivers/net/wireless/ath/ath6kl/common.h
index 71f5450..98a8861 100644
--- a/drivers/net/wireless/ath/ath6kl/common.h
+++ b/drivers/net/wireless/ath/ath6kl/common.h
@@ -78,6 +78,7 @@ enum crypto_type {
struct htc_endpoint_credit_dist;
struct ath6kl;
+struct ath6kl_htcap;
enum htc_credit_dist_reason;
struct ath6kl_htc_credit_info;
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 75b1d86..8e7e9480 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -474,6 +474,12 @@ struct ath6kl_mc_filter {
char hw_addr[ATH6KL_MCAST_FILTER_MAC_ADDR_SIZE];
};
+struct ath6kl_htcap {
+ bool ht_enable;
+ u8 ampdu_factor;
+ unsigned short cap_info;
+};
+
/*
* Driver's maximum limit, note that some firmwares support only one vif
* and the runtime (current) limit must be checked from ar->vif_max.
@@ -522,6 +528,7 @@ struct ath6kl_vif {
struct ath6kl_wep_key wep_key_list[WMI_MAX_KEY_INDEX + 1];
struct ath6kl_key keys[WMI_MAX_KEY_INDEX + 1];
struct aggr_info *aggr_cntxt;
+ struct ath6kl_htcap htcap;
struct timer_list disconnect_timer;
struct timer_list sched_scan_timer;
@@ -534,6 +541,8 @@ struct ath6kl_vif {
u32 send_action_id;
bool probe_req_report;
u16 next_chan;
+ enum nl80211_channel_type next_ch_type;
+ enum ieee80211_band next_ch_band;
u16 assoc_bss_beacon_int;
u16 listen_intvl_t;
u16 bmiss_time_t;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index b1b1f34..efd707e 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2882,6 +2882,43 @@ int ath6kl_wmi_set_keepalive_cmd(struct wmi *wmi, u8 if_idx,
return ret;
}
+int ath6kl_wmi_set_htcap_cmd(struct wmi *wmi, u8 if_idx,
+ enum ieee80211_band band,
+ struct ath6kl_htcap *htcap)
+{
+ struct sk_buff *skb;
+ struct wmi_set_htcap_cmd *cmd;
+
+ skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_set_htcap_cmd *) skb->data;
+
+ /*
+ * NOTE: Band in firmware matches enum ieee80211_band, it is unlikely
+ * this will be changed in firmware. If at all there is any change in
+ * band value, the host needs to be fixed.
+ */
+ cmd->band = band;
+ cmd->ht_enable = !!htcap->ht_enable;
+ cmd->ht20_sgi = !!(htcap->cap_info & IEEE80211_HT_CAP_SGI_20);
+ cmd->ht40_supported =
+ !!(htcap->cap_info & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+ cmd->ht40_sgi = !!(htcap->cap_info & IEEE80211_HT_CAP_SGI_40);
+ cmd->intolerant_40mhz =
+ !!(htcap->cap_info & IEEE80211_HT_CAP_40MHZ_INTOLERANT);
+ cmd->max_ampdu_len_exp = htcap->ampdu_factor;
+
+ ath6kl_dbg(ATH6KL_DBG_WMI,
+ "Set htcap: band:%d ht_enable:%d 40mhz:%d sgi_20mhz:%d sgi_40mhz:%d 40mhz_intolerant:%d ampdu_len_exp:%d\n",
+ cmd->band, cmd->ht_enable, cmd->ht40_supported,
+ cmd->ht20_sgi, cmd->ht40_sgi, cmd->intolerant_40mhz,
+ cmd->max_ampdu_len_exp);
+ return ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_SET_HT_CAP_CMDID,
+ NO_SYNC_WMIFLAG);
+}
+
int ath6kl_wmi_test_cmd(struct wmi *wmi, void *buf, size_t len)
{
struct sk_buff *skb;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index b99e9bd..ee45d10 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1271,6 +1271,16 @@ struct wmi_mcast_filter_add_del_cmd {
u8 mcast_mac[ATH6KL_MCAST_FILTER_MAC_ADDR_SIZE];
} __packed;
+struct wmi_set_htcap_cmd {
+ u8 band;
+ u8 ht_enable;
+ u8 ht40_supported;
+ u8 ht20_sgi;
+ u8 ht40_sgi;
+ u8 intolerant_40mhz;
+ u8 max_ampdu_len_exp;
+} __packed;
+
/* Command Replies */
/* WMI_GET_CHANNEL_LIST_CMDID reply */
@@ -2473,6 +2483,9 @@ int ath6kl_wmi_get_roam_tbl_cmd(struct wmi *wmi);
int ath6kl_wmi_set_wmm_txop(struct wmi *wmi, u8 if_idx, enum wmi_txop_cfg cfg);
int ath6kl_wmi_set_keepalive_cmd(struct wmi *wmi, u8 if_idx,
u8 keep_alive_intvl);
+int ath6kl_wmi_set_htcap_cmd(struct wmi *wmi, u8 if_idx,
+ enum ieee80211_band band,
+ struct ath6kl_htcap *htcap);
int ath6kl_wmi_test_cmd(struct wmi *wmi, void *buf, size_t len);
s32 ath6kl_wmi_get_rate(s8 rate_index);
OpenPOWER on IntegriCloud