diff options
author | Rafał Miłecki <zajec5@gmail.com> | 2016-04-14 11:37:43 +0200 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2016-04-30 20:12:28 +0530 |
commit | d3feb406733544dbf0e239ef945a09decdceac88 (patch) | |
tree | 51c30c9924be5a90fa334a822581dddb585a685c | |
parent | 444525d4f5dd272f695379f5d22660c96ad4fc23 (diff) | |
download | op-kernel-dev-d3feb406733544dbf0e239ef945a09decdceac88.zip op-kernel-dev-d3feb406733544dbf0e239ef945a09decdceac88.tar.gz |
phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with an EHCI controller driver.
There are (just a few) registers being defined in bcma header. It's
because DMU/CRU registers will be also needed in other drivers. We will
need them e.g. in PCIe controller/PHY driver and at some point probably
in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
avoid code duplication.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-rw-r--r-- | Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 | ||||
-rw-r--r-- | drivers/phy/Kconfig | 9 | ||||
-rw-r--r-- | drivers/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/phy-bcm-ns-usb2.c | 137 | ||||
-rw-r--r-- | include/linux/bcma/bcma.h | 1 | ||||
-rw-r--r-- | include/linux/bcma/bcma_driver_arm_c9.h | 15 |
6 files changed, 184 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt new file mode 100644 index 0000000..a7aee9e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt @@ -0,0 +1,21 @@ +Driver for Broadcom Northstar USB 2.0 PHY + +Required properties: +- compatible: brcm,ns-usb2-phy +- reg: iomem address range of DMU (Device Management Unit) +- reg-names: "dmu", the only needed & supported reg right now +- clocks: USB PHY reference clock +- clock-names: "phy-ref-clk", the only needed & supported clock right now + +To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it +requires passing phandle to the USB PHY reference clock. + +Example: + usb2-phy { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + #phy-cells = <0>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + }; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index f6ff76e..f2b458f 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,15 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_BCM_NS_USB2 + tristate "Broadcom Northstar USB 2.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 2.0 PHY connected to the USB + controller on Northstar family. + config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index f03fa1f..0de09e1 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c new file mode 100644 index 0000000..95ab6b2 --- /dev/null +++ b/drivers/phy/phy-bcm-ns-usb2.c @@ -0,0 +1,137 @@ +/* + * Broadcom Northstar USB 2.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bcma/bcma.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct bcm_ns_usb2 { + struct device *dev; + struct clk *ref_clk; + struct phy *phy; + void __iomem *dmu; +}; + +static int bcm_ns_usb2_phy_init(struct phy *phy) +{ + struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); + struct device *dev = usb2->dev; + void __iomem *dmu = usb2->dmu; + u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv; + int err = 0; + + err = clk_prepare_enable(usb2->ref_clk); + if (err < 0) { + dev_err(dev, "Failed to prepare ref clock: %d\n", err); + goto err_out; + } + + ref_clk_rate = clk_get_rate(usb2->ref_clk); + if (!ref_clk_rate) { + dev_err(dev, "Failed to get ref clock rate\n"); + err = -EINVAL; + goto err_clk_off; + } + + usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL); + + if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) { + usb_pll_pdiv = usb2ctl; + usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK; + usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT; + } else { + usb_pll_pdiv = 1 << 3; + } + + /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */ + usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate; + + /* Unlock DMU PLL settings with some magic value */ + writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY); + + /* Write USB 2.0 PLL control setting */ + usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK; + usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT; + writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL); + + /* Lock DMU PLL settings */ + writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY); + +err_clk_off: + clk_disable_unprepare(usb2->ref_clk); +err_out: + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb2_phy_init, + .owner = THIS_MODULE, +}; + +static int bcm_ns_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_ns_usb2 *usb2; + struct resource *res; + struct phy_provider *phy_provider; + + usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL); + if (!usb2) + return -ENOMEM; + usb2->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu"); + usb2->dmu = devm_ioremap_resource(dev, res); + if (IS_ERR(usb2->dmu)) { + dev_err(dev, "Failed to map DMU regs\n"); + return PTR_ERR(usb2->dmu); + } + + usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk"); + if (IS_ERR(usb2->ref_clk)) { + dev_err(dev, "Clock not defined\n"); + return PTR_ERR(usb2->ref_clk); + } + + usb2->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + phy_set_drvdata(usb2->phy, usb2); + platform_set_drvdata(pdev, usb2); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id bcm_ns_usb2_id_table[] = { + { .compatible = "brcm,ns-usb2-phy", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table); + +static struct platform_driver bcm_ns_usb2_driver = { + .probe = bcm_ns_usb2_probe, + .driver = { + .name = "bcm_ns_usb2", + .of_match_table = bcm_ns_usb2_id_table, + }, +}; +module_platform_driver(bcm_ns_usb2_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 0367c63..e6b41f4 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -4,6 +4,7 @@ #include <linux/pci.h> #include <linux/mod_devicetable.h> +#include <linux/bcma/bcma_driver_arm_c9.h> #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> #include <linux/bcma/bcma_driver_pcie2.h> diff --git a/include/linux/bcma/bcma_driver_arm_c9.h b/include/linux/bcma/bcma_driver_arm_c9.h new file mode 100644 index 0000000..93bd73d --- /dev/null +++ b/include/linux/bcma/bcma_driver_arm_c9.h @@ -0,0 +1,15 @@ +#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_ +#define LINUX_BCMA_DRIVER_ARM_C9_H_ + +/* DMU (Device Management Unit) */ +#define BCMA_DMU_CRU_USB2_CONTROL 0x0164 +#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC +#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2 +#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000 +#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12 +#define BCMA_DMU_CRU_CLKSET_KEY 0x0180 +#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0 +#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010 +#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000 + +#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */ |