x86: Remove cmpxchg from i386 NMI nesting code

I've been informed by someone on LWN called 'slashdot' that
some i386 machines do not support a true cmpxchg. The cmpxchg
used by the i386 NMI nesting code must be a true cmpxchg as
disabling interrupts will not work for NMIs (which is the work
around for i386s that do not have a true cmpxchg).

This 'slashdot' character also suggested a fix to the issue.
As the state of the nesting NMIs goes as follows:

  NOT_RUNNING -> EXECUTING
  EXECUTING   -> NOT_RUNNING
  EXECUTING   -> LATCHED
  LATCHED     -> EXECUTING

Having these states as enum values of:

  NOT_RUNNING = 0
  EXECUTING   = 1
  LATCHED     = 2

Instead of a cmpxchg to make EXECUTING -> NOT_RUNNING a
dec_and_test() would work as well. If the dec_and_test brings
the state to NOT_RUNNING, that is the same as a cmpxchg
succeeding to change EXECUTING to NOT_RUNNING. If a nested NMI
were to come in and change it to LATCHED, the dec_and_test() would
convert the state to EXECUTING (what we want it to be in such a
case anyway).

I asked 'slashdot' to post this as a patch, but it never came to
be. I decided to do the work instead.

Thanks to H. Peter Anvin for suggesting to use this_cpu_dec_and_return()
instead of local_dec_and_test(&__get_cpu_var()).

Link: http://lwn.net/Articles/484932/

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 21 insertions, 14 deletions

diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index a0b2f84..a15a888 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -365,8 +365,9 @@ static __kprobes void default_do_nmi(struct pt_regs *regs)
 #ifdef CONFIG_X86_32
 /*
  * For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C. Simply have 3 states
- * the NMI can be in.
+ * add a workaround to the iret problem in C (preventing nested
+ * NMIs if an NMI takes a trap). Simply have 3 states the NMI
+ * can be in:
  *
  *  1) not running
  *  2) executing
@@ -383,13 +384,20 @@ static __kprobes void default_do_nmi(struct pt_regs *regs)
  * If an NMI hits a breakpoint that executes an iret, another
  * NMI can preempt it. We do not want to allow this new NMI
  * to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the first NMI will perform
- * an cmpxchg on the state, and if it doesn't successfully
- * reset the state to "not running" it will restart the next
- * NMI.
+ * We set the state to "latched", and the exit of the first NMI will
+ * perform a dec_return, if the result is zero (NOT_RUNNING), then
+ * it will simply exit the NMI handler. If not, the dec_return
+ * would have set the state to NMI_EXECUTING (what we want it to
+ * be when we are running). In this case, we simply jump back
+ * to rerun the NMI handler again, and restart the 'latched' NMI.
+ *
+ * No trap (breakpoint or page fault) should be hit before nmi_restart,
+ * thus there is no race between the first check of state for NOT_RUNNING
+ * and setting it to NMI_EXECUTING. The HW will prevent nested NMIs
+ * at this point.
  */
 enum nmi_states {
-	NMI_NOT_RUNNING,
+	NMI_NOT_RUNNING = 0,
 	NMI_EXECUTING,
 	NMI_LATCHED,
 };
@@ -397,18 +405,17 @@ static DEFINE_PER_CPU(enum nmi_states, nmi_state);
 
 #define nmi_nesting_preprocess(regs)					\
 	do {								\
-		if (__get_cpu_var(nmi_state) != NMI_NOT_RUNNING) {	\
-			__get_cpu_var(nmi_state) = NMI_LATCHED;		\
+		if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {	\
+			this_cpu_write(nmi_state, NMI_LATCHED);		\
 			return;						\
 		}							\
-	nmi_restart:							\
-		__get_cpu_var(nmi_state) = NMI_EXECUTING;		\
-	} while (0)
+		this_cpu_write(nmi_state, NMI_EXECUTING);		\
+	} while (0);							\
+	nmi_restart:
 
 #define nmi_nesting_postprocess()					\
 	do {								\
-		if (cmpxchg(&__get_cpu_var(nmi_state),			\
-		    NMI_EXECUTING, NMI_NOT_RUNNING) != NMI_EXECUTING)	\
+		if (this_cpu_dec_return(nmi_state))			\
 			goto nmi_restart;				\
 	} while (0)
 #else /* x86_64 */