Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi: spi_txx9.c: use resource_size()
  spi: spi_sh_sci.c: use resource_size()
  spi: spi_mpc8xxx.c: use resource_size()
  spi: spi_bfin5xx.c: use resource_size()
  spi: atmel_spi.c: use resource_size()
  spi: Add s3c64xx SPI Controller driver
  atmel_spi: fix dma addr calculation for len > BUFFER_SIZE
  spi_s3c24xx: add FIQ pseudo-DMA support
  spi: controller driver for Designware SPI core
  spidev: add proper section markers
  spidev: use DECLARE_BITMAP instead of declaring the array

16 files changed, 2950 insertions, 33 deletions

diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 193b39d..4d95883 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -18,6 +18,8 @@ struct s3c2410_spi_info {
 	unsigned int		 num_cs;	/* total chipselects */
 	int			 bus_num;       /* bus number to use. */
 
+	unsigned int		 use_fiq:1;	/* use fiq */
+
 	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2d9d703..f55eb01 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -216,6 +216,17 @@ config SPI_S3C24XX
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
 
+config SPI_S3C24XX_FIQ
+	bool "S3C24XX driver with FIQ pseudo-DMA"
+	depends on SPI_S3C24XX
+	select FIQ
+	help
+	  Enable FIQ support for the S3C24XX SPI driver to provide pseudo
+	  DMA by using the fast-interrupt request framework, This allows
+	  the driver to get DMA-like performance when there are either
+	  no free DMA channels, or when doing transfers that required both
+	  TX and RX data paths.
+
 config SPI_S3C24XX_GPIO
 	tristate "Samsung S3C24XX series SPI by GPIO"
 	depends on ARCH_S3C2410 && EXPERIMENTAL
@@ -226,6 +237,13 @@ config SPI_S3C24XX_GPIO
 	  the inbuilt hardware cannot provide the transfer mode, or
 	  where the board is using non hardware connected pins.
 
+config SPI_S3C64XX
+	tristate "Samsung S3C64XX series type SPI"
+	depends on ARCH_S3C64XX && EXPERIMENTAL
+	select S3C64XX_DMA
+	help
+	  SPI driver for Samsung S3C64XX and newer SoCs.
+
 config SPI_SH_MSIOF
 	tristate "SuperH MSIOF SPI controller"
 	depends on SUPERH && HAVE_CLK
@@ -289,6 +307,16 @@ config SPI_NUC900
 # Add new SPI master controllers in alphabetical order above this line
 #
 
+config SPI_DESIGNWARE
+	bool "DesignWare SPI controller core support"
+	depends on SPI_MASTER
+	help
+	  general driver for SPI controller core from DesignWare
+
+config SPI_DW_PCI
+	tristate "PCI interface driver for DW SPI core"
+	depends on SPI_DESIGNWARE && PCI
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ed8c167..f3d2810 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
+obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
@@ -30,7 +32,8 @@ obj-$(CONFIG_SPI_MPC52xx)		+= mpc52xx_spi.o
 obj-$(CONFIG_SPI_MPC8xxx)		+= spi_mpc8xxx.o
 obj-$(CONFIG_SPI_PPC4xx)		+= spi_ppc4xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
-obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx_hw.o
+obj-$(CONFIG_SPI_S3C64XX)		+= spi_s3c64xx.o
 obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
 obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
 obj-$(CONFIG_SPI_XILINX_OF)		+= xilinx_spi_of.o
@@ -39,6 +42,11 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
 obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
 obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
+
+# special build for s3c24xx spi driver with fiq support
+spi_s3c24xx_hw-y			:= spi_s3c24xx.o
+spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
+
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index f5b3fdb..d21c24e 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -189,14 +189,14 @@ static void atmel_spi_next_xfer_data(struct spi_master *master,
 
 	/* use scratch buffer only when rx or tx data is unspecified */
 	if (xfer->rx_buf)
-		*rx_dma = xfer->rx_dma + xfer->len - len;
+		*rx_dma = xfer->rx_dma + xfer->len - *plen;
 	else {
 		*rx_dma = as->buffer_dma;
 		if (len > BUFFER_SIZE)
 			len = BUFFER_SIZE;
 	}
 	if (xfer->tx_buf)
-		*tx_dma = xfer->tx_dma + xfer->len - len;
+		*tx_dma = xfer->tx_dma + xfer->len - *plen;
 	else {
 		*tx_dma = as->buffer_dma;
 		if (len > BUFFER_SIZE)
@@ -788,7 +788,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
 	spin_lock_init(&as->lock);
 	INIT_LIST_HEAD(&as->queue);
 	as->pdev = pdev;
-	as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
+	as->regs = ioremap(regs->start, resource_size(regs));
 	if (!as->regs)
 		goto out_free_buffer;
 	as->irq = irq;
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
new file mode 100644
index 0000000..31620fa
--- /dev/null
+++ b/drivers/spi/dw_spi.c
@@ -0,0 +1,944 @@
+/*
+ * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c)
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+
+#include <linux/spi/dw_spi.h>
+#include <linux/spi/spi.h>
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#endif
+
+#define START_STATE	((void *)0)
+#define RUNNING_STATE	((void *)1)
+#define DONE_STATE	((void *)2)
+#define ERROR_STATE	((void *)-1)
+
+#define QUEUE_RUNNING	0
+#define QUEUE_STOPPED	1
+
+#define MRST_SPI_DEASSERT	0
+#define MRST_SPI_ASSERT		1
+
+/* Slave spi_dev related */
+struct chip_data {
+	u16 cr0;
+	u8 cs;			/* chip select pin */
+	u8 n_bytes;		/* current is a 1/2/4 byte op */
+	u8 tmode;		/* TR/TO/RO/EEPROM */
+	u8 type;		/* SPI/SSP/MicroWire */
+
+	u8 poll_mode;		/* 1 means use poll mode */
+
+	u32 dma_width;
+	u32 rx_threshold;
+	u32 tx_threshold;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u16 clk_div;		/* baud rate divider */
+	u32 speed_hz;		/* baud rate */
+	int (*write)(struct dw_spi *dws);
+	int (*read)(struct dw_spi *dws);
+	void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_DEBUG_FS
+static int spi_show_regs_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define SPI_REGS_BUFSIZE	1024
+static ssize_t  spi_show_regs(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct dw_spi *dws;
+	char *buf;
+	u32 len = 0;
+	ssize_t ret;
+
+	dws = file->private_data;
+
+	buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
+	if (!buf)
+		return 0;
+
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"MRST SPI0 registers:\n");
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"=================================\n");
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"SSIENR: \t0x%08x\n", dw_readl(dws, ssienr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"SER: \t\t0x%08x\n", dw_readl(dws, ser));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"SR: \t\t0x%08x\n", dw_readl(dws, sr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"IMR: \t\t0x%08x\n", dw_readl(dws, imr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"ISR: \t\t0x%08x\n", dw_readl(dws, isr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr));
+	len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
+			"=================================\n");
+
+	ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+	return ret;
+}
+
+static const struct file_operations mrst_spi_regs_ops = {
+	.owner		= THIS_MODULE,
+	.open		= spi_show_regs_open,
+	.read		= spi_show_regs,
+};
+
+static int mrst_spi_debugfs_init(struct dw_spi *dws)
+{
+	dws->debugfs = debugfs_create_dir("mrst_spi", NULL);
+	if (!dws->debugfs)
+		return -ENOMEM;
+
+	debugfs_create_file("registers", S_IFREG | S_IRUGO,
+		dws->debugfs, (void *)dws, &mrst_spi_regs_ops);
+	return 0;
+}
+
+static void mrst_spi_debugfs_remove(struct dw_spi *dws)
+{
+	if (dws->debugfs)
+		debugfs_remove_recursive(dws->debugfs);
+}
+
+#else
+static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
+{
+}
+
+static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void wait_till_not_busy(struct dw_spi *dws)
+{
+	unsigned long end = jiffies + usecs_to_jiffies(1000);
+
+	while (time_before(jiffies, end)) {
+		if (!(dw_readw(dws, sr) & SR_BUSY))
+			return;
+	}
+	dev_err(&dws->master->dev,
+		"DW SPI: Stutus keeps busy for 1000us after a read/write!\n");
+}
+
+static void flush(struct dw_spi *dws)
+{
+	while (dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+		dw_readw(dws, dr);
+
+	wait_till_not_busy(dws);
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static int null_writer(struct dw_spi *dws)
+{
+	u8 n_bytes = dws->n_bytes;
+
+	if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
+		|| (dws->tx == dws->tx_end))
+		return 0;
+	dw_writew(dws, dr, 0);
+	dws->tx += n_bytes;
+
+	wait_till_not_busy(dws);
+	return 1;
+}
+
+static int null_reader(struct dw_spi *dws)
+{
+	u8 n_bytes = dws->n_bytes;
+
+	while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+		&& (dws->rx < dws->rx_end)) {
+		dw_readw(dws, dr);
+		dws->rx += n_bytes;
+	}
+	wait_till_not_busy(dws);
+	return dws->rx == dws->rx_end;
+}
+
+static int u8_writer(struct dw_spi *dws)
+{
+	if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
+		|| (dws->tx == dws->tx_end))
+		return 0;
+
+	dw_writew(dws, dr, *(u8 *)(dws->tx));
+	++dws->tx;
+
+	wait_till_not_busy(dws);
+	return 1;
+}
+
+static int u8_reader(struct dw_spi *dws)
+{
+	while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+		&& (dws->rx < dws->rx_end)) {
+		*(u8 *)(dws->rx) = dw_readw(dws, dr);
+		++dws->rx;
+	}
+
+	wait_till_not_busy(dws);
+	return dws->rx == dws->rx_end;
+}
+
+static int u16_writer(struct dw_spi *dws)
+{
+	if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL)
+		|| (dws->tx == dws->tx_end))
+		return 0;
+
+	dw_writew(dws, dr, *(u16 *)(dws->tx));
+	dws->tx += 2;
+
+	wait_till_not_busy(dws);
+	return 1;
+}
+
+static int u16_reader(struct dw_spi *dws)
+{
+	u16 temp;
+
+	while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+		&& (dws->rx < dws->rx_end)) {
+		temp = dw_readw(dws, dr);
+		*(u16 *)(dws->rx) = temp;
+		dws->rx += 2;
+	}
+
+	wait_till_not_busy(dws);
+	return dws->rx == dws->rx_end;
+}
+
+static void *next_transfer(struct dw_spi *dws)
+{
+	struct spi_message *msg = dws->cur_msg;
+	struct spi_transfer *trans = dws->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		dws->cur_transfer =
+			list_entry(trans->transfer_list.next,
+					struct spi_transfer,
+					transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+/*
+ * Note: first step is the protocol driver prepares
+ * a dma-capable memory, and this func just need translate
+ * the virt addr to physical
+ */
+static int map_dma_buffers(struct dw_spi *dws)
+{
+	if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
+		|| !dws->cur_chip->enable_dma)
+		return 0;
+
+	if (dws->cur_transfer->tx_dma)
+		dws->tx_dma = dws->cur_transfer->tx_dma;
+
+	if (dws->cur_transfer->rx_dma)
+		dws->rx_dma = dws->cur_transfer->rx_dma;
+
+	return 1;
+}
+
+/* Caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct dw_spi *dws)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+
+	spin_lock_irqsave(&dws->lock, flags);
+	msg = dws->cur_msg;
+	dws->cur_msg = NULL;
+	dws->cur_transfer = NULL;
+	dws->prev_chip = dws->cur_chip;
+	dws->cur_chip = NULL;
+	dws->dma_mapped = 0;
+	queue_work(dws->workqueue, &dws->pump_messages);
+	spin_unlock_irqrestore(&dws->lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	if (!last_transfer->cs_change)
+		dws->cs_control(MRST_SPI_DEASSERT);
+
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+static void int_error_stop(struct dw_spi *dws, const char *msg)
+{
+	/* Stop and reset hw */
+	flush(dws);
+	spi_enable_chip(dws, 0);
+
+	dev_err(&dws->master->dev, "%s\n", msg);
+	dws->cur_msg->state = ERROR_STATE;
+	tasklet_schedule(&dws->pump_transfers);
+}
+
+static void transfer_complete(struct dw_spi *dws)
+{
+	/* Update total byte transfered return count actual bytes read */
+	dws->cur_msg->actual_length += dws->len;
+
+	/* Move to next transfer */
+	dws->cur_msg->state = next_transfer(dws);
+
+	/* Handle end of message */
+	if (dws->cur_msg->state == DONE_STATE) {
+		dws->cur_msg->status = 0;
+		giveback(dws);
+	} else
+		tasklet_schedule(&dws->pump_transfers);
+}
+
+static irqreturn_t interrupt_transfer(struct dw_spi *dws)
+{
+	u16 irq_status, irq_mask = 0x3f;
+
+	irq_status = dw_readw(dws, isr) & irq_mask;
+	/* Error handling */
+	if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
+		dw_readw(dws, txoicr);
+		dw_readw(dws, rxoicr);
+		dw_readw(dws, rxuicr);
+		int_error_stop(dws, "interrupt_transfer: fifo overrun");
+		return IRQ_HANDLED;
+	}
+
+	/* INT comes from tx */
+	if (dws->tx && (irq_status & SPI_INT_TXEI)) {
+		while (dws->tx < dws->tx_end)
+			dws->write(dws);
+
+		if (dws->tx == dws->tx_end) {
+			spi_mask_intr(dws, SPI_INT_TXEI);
+			transfer_complete(dws);
+		}
+	}
+
+	/* INT comes from rx */
+	if (dws->rx && (irq_status & SPI_INT_RXFI)) {
+		if (dws->read(dws))
+			transfer_complete(dws);
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dw_spi_irq(int irq, void *dev_id)
+{
+	struct dw_spi *dws = dev_id;
+
+	if (!dws->cur_msg) {
+		spi_mask_intr(dws, SPI_INT_TXEI);
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	return dws->transfer_handler(dws);
+}
+
+/* Must be called inside pump_transfers() */
+static void poll_transfer(struct dw_spi *dws)
+{
+	if (dws->tx) {
+		while (dws->write(dws))
+			dws->read(dws);
+	}
+
+	dws->read(dws);
+	transfer_complete(dws);
+}
+
+static void dma_transfer(struct dw_spi *dws, int cs_change)
+{
+}
+
+static void pump_transfers(unsigned long data)
+{
+	struct dw_spi *dws = (struct dw_spi *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct spi_device *spi = NULL;
+	struct chip_data *chip = NULL;
+	u8 bits = 0;
+	u8 imask = 0;
+	u8 cs_change = 0;
+	u16 clk_div = 0;
+	u32 speed = 0;
+	u32 cr0 = 0;
+
+	/* Get current state information */
+	message = dws->cur_msg;
+	transfer = dws->cur_transfer;
+	chip = dws->cur_chip;
+	spi = message->spi;
+
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		goto early_exit;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		goto early_exit;
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	dws->n_bytes = chip->n_bytes;
+	dws->dma_width = chip->dma_width;
+	dws->cs_control = chip->cs_control;
+
+	dws->rx_dma = transfer->rx_dma;
+	dws->tx_dma = transfer->tx_dma;
+	dws->tx = (void *)transfer->tx_buf;
+	dws->tx_end = dws->tx + transfer->len;
+	dws->rx = transfer->rx_buf;
+	dws->rx_end = dws->rx + transfer->len;
+	dws->write = dws->tx ? chip->write : null_writer;
+	dws->read = dws->rx ? chip->read : null_reader;
+	dws->cs_change = transfer->cs_change;
+	dws->len = dws->cur_transfer->len;
+	if (chip != dws->prev_chip)
+		cs_change = 1;
+
+	cr0 = chip->cr0;
+
+	/* Handle per transfer options for bpw and speed */
+	if (transfer->speed_hz) {
+		speed = chip->speed_hz;
+
+		if (transfer->speed_hz != speed) {
+			speed = transfer->speed_hz;
+			if (speed > dws->max_freq) {
+				printk(KERN_ERR "MRST SPI0: unsupported"
+					"freq: %dHz\n", speed);
+				message->status = -EIO;
+				goto early_exit;
+			}
+
+			/* clk_div doesn't support odd number */
+			clk_div = dws->max_freq / speed;
+			clk_div = (clk_div >> 1) << 1;
+
+			chip->speed_hz = speed;
+			chip->clk_div = clk_div;
+		}
+	}
+	if (transfer->bits_per_word) {
+		bits = transfer->bits_per_word;
+
+		switch (bits) {
+		case 8:
+			dws->n_bytes = 1;
+			dws->dma_width = 1;
+			dws->read = (dws->read != null_reader) ?
+					u8_reader : null_reader;
+			dws->write = (dws->write != null_writer) ?
+					u8_writer : null_writer;
+			break;
+		case 16:
+			dws->n_bytes = 2;
+			dws->dma_width = 2;
+			dws->read = (dws->read != null_reader) ?
+					u16_reader : null_reader;
+			dws->write = (dws->write != null_writer) ?
+					u16_writer : null_writer;
+			break;
+		default:
+			printk(KERN_ERR "MRST SPI0: unsupported bits:"
+				"%db\n", bits);
+			message->status = -EIO;
+			goto early_exit;
+		}
+
+		cr0 = (bits - 1)
+			| (chip->type << SPI_FRF_OFFSET)
+			| (spi->mode << SPI_MODE_OFFSET)
+			| (chip->tmode << SPI_TMOD_OFFSET);
+	}
+	message->state = RUNNING_STATE;
+
+	/* Check if current transfer is a DMA transaction */
+	dws->dma_mapped = map_dma_buffers(dws);
+
+	if (!dws->dma_mapped && !chip->poll_mode) {
+		if (dws->rx)
+			imask |= SPI_INT_RXFI;
+		if (dws->tx)
+			imask |= SPI_INT_TXEI;
+		dws->transfer_handler = interrupt_transfer;
+	}
+
+	/*
+	 * Reprogram registers only if
+	 *	1. chip select changes
+	 *	2. clk_div is changed
+	 *	3. control value changes
+	 */
+	if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) {
+		spi_enable_chip(dws, 0);
+
+		if (dw_readw(dws, ctrl0) != cr0)
+			dw_writew(dws, ctrl0, cr0);
+
+		/* Set the interrupt mask, for poll mode just diable all int */
+		spi_mask_intr(dws, 0xff);
+		if (!chip->poll_mode)
+			spi_umask_intr(dws, imask);
+
+		spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
+		spi_chip_sel(dws, spi->chip_select);
+		spi_enable_chip(dws, 1);
+
+		if (cs_change)
+			dws->prev_chip = chip;
+	}
+
+	if (dws->dma_mapped)
+		dma_transfer(dws, cs_change);
+
+	if (chip->poll_mode)
+		poll_transfer(dws);
+
+	return;
+
+early_exit:
+	giveback(dws);
+	return;
+}
+
+static void pump_messages(struct work_struct *work)
+{
+	struct dw_spi *dws =
+		container_of(work, struct dw_spi, pump_messages);
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&dws->lock, flags);
+	if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) {
+		dws->busy = 0;
+		spin_unlock_irqrestore(&dws->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (dws->cur_msg) {
+		spin_unlock_irqrestore(&dws->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue);
+	list_del_init(&dws->cur_msg->queue);
+
+	/* Initial message state*/
+	dws->cur_msg->state = START_STATE;
+	dws->cur_transfer = list_entry(dws->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+	dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&dws->pump_transfers);
+
+	dws->busy = 1;
+	spin_unlock_irqrestore(&dws->lock, flags);
+}
+
+/* spi_device use this to queue in their spi_msg */
+static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dws->lock, flags);
+
+	if (dws->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&dws->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &dws->queue);
+
+	if (dws->run == QUEUE_RUNNING && !dws->busy) {
+
+		if (dws->cur_transfer || dws->cur_msg)
+			queue_work(dws->workqueue,
+					&dws->pump_messages);
+		else {
+			/* If no other data transaction in air, just go */
+			spin_unlock_irqrestore(&dws->lock, flags);
+			pump_messages(&dws->pump_messages);
+			return 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&dws->lock, flags);
+	return 0;
+}
+
+/* This may be called twice for each spi dev */
+static int dw_spi_setup(struct spi_device *spi)
+{
+	struct dw_spi_chip *chip_info = NULL;
+	struct chip_data *chip;
+
+	if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
+		return -EINVAL;
+
+	/* Only alloc on first setup */
+	chip = spi_get_ctldata(spi);
+	if (!chip) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		chip->cs_control = null_cs_control;
+		chip->enable_dma = 0;
+	}
+
+	/*
+	 * Protocol drivers may change the chip settings, so...
+	 * if chip_info exists, use it
+	 */
+	chip_info = spi->controller_data;
+
+	/* chip_info doesn't always exist */
+	if (chip_info) {
+		if (chip_info->cs_control)
+			chip->cs_control = chip_info->cs_control;
+
+		chip->poll_mode = chip_info->poll_mode;
+		chip->type = chip_info->type;
+
+		chip->rx_threshold = 0;
+		chip->tx_threshold = 0;
+
+		chip->enable_dma = chip_info->enable_dma;
+	}
+
+	if (spi->bits_per_word <= 8) {
+		chip->n_bytes = 1;
+		chip->dma_width = 1;
+		chip->read = u8_reader;
+		chip->write = u8_writer;
+	} else if (spi->bits_per_word <= 16) {
+		chip->n_bytes = 2;
+		chip->dma_width = 2;
+		chip->read = u16_reader;
+		chip->write = u16_writer;
+	} else {
+		/* Never take >16b case for MRST SPIC */
+		dev_err(&spi->dev, "invalid wordsize\n");
+		return -EINVAL;
+	}
+	chip->bits_per_word = spi->bits_per_word;
+
+	chip->speed_hz = spi->max_speed_hz;
+	if (chip->speed_hz)
+		chip->clk_div = 25000000 / chip->speed_hz;
+	else
+		chip->clk_div = 8;	/* default value */
+
+	chip->tmode = 0; /* Tx & Rx */
+	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
+	chip->cr0 = (chip->bits_per_word - 1)
+			| (chip->type << SPI_FRF_OFFSET)
+			| (spi->mode  << SPI_MODE_OFFSET)
+			| (chip->tmode << SPI_TMOD_OFFSET);
+
+	spi_set_ctldata(spi, chip);
+	return 0;
+}
+
+static void dw_spi_cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata(spi);
+	kfree(chip);
+}
+
+static int __init init_queue(struct dw_spi *dws)
+{
+	INIT_LIST_HEAD(&dws->queue);
+	spin_lock_init(&dws->lock);
+
+	dws->run = QUEUE_STOPPED;
+	dws->busy = 0;
+
+	tasklet_init(&dws->pump_transfers,
+			pump_transfers,	(unsigned long)dws);
+
+	INIT_WORK(&dws->pump_messages, pump_messages);
+	dws->workqueue = create_singlethread_workqueue(
+					dev_name(dws->master->dev.parent));
+	if (dws->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct dw_spi *dws)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dws->lock, flags);
+
+	if (dws->run == QUEUE_RUNNING || dws->busy) {
+		spin_unlock_irqrestore(&dws->lock, flags);
+		return -EBUSY;
+	}
+
+	dws->run = QUEUE_RUNNING;
+	dws->cur_msg = NULL;
+	dws->cur_transfer = NULL;
+	dws->cur_chip = NULL;
+	dws->prev_chip = NULL;
+	spin_unlock_irqrestore(&dws->lock, flags);
+
+	queue_work(dws->workqueue, &dws->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct dw_spi *dws)
+{
+	unsigned long flags;
+	unsigned limit = 50;
+	int status = 0;
+
+	spin_lock_irqsave(&dws->lock, flags);
+	dws->run = QUEUE_STOPPED;
+	while (!list_empty(&dws->queue) && dws->busy && limit--) {
+		spin_unlock_irqrestore(&dws->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&dws->lock, flags);
+	}
+
+	if (!list_empty(&dws->queue) || dws->busy)
+		status = -EBUSY;
+	spin_unlock_irqrestore(&dws->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct dw_spi *dws)
+{
+	int status;
+
+	status = stop_queue(dws);
+	if (status != 0)
+		return status;
+	destroy_workqueue(dws->workqueue);
+	return 0;
+}
+
+/* Restart the controller, disable all interrupts, clean rx fifo */
+static void spi_hw_init(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_mask_intr(dws, 0xff);
+	spi_enable_chip(dws, 1);
+	flush(dws);
+}
+
+int __devinit dw_spi_add_host(struct dw_spi *dws)
+{
+	struct spi_master *master;
+	int ret;
+
+	BUG_ON(dws == NULL);
+
+	master = spi_alloc_master(dws->parent_dev, 0);
+	if (!master) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	dws->master = master;
+	dws->type = SSI_MOTO_SPI;
+	dws->prev_chip = NULL;
+	dws->dma_inited = 0;
+	dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
+
+	ret = request_irq(dws->irq, dw_spi_irq, 0,
+			"dw_spi", dws);
+	if (ret < 0) {
+		dev_err(&master->dev, "can not get IRQ\n");
+		goto err_free_master;
+	}
+
+	master->mode_bits = SPI_CPOL | SPI_CPHA;
+	master->bus_num = dws->bus_num;
+	master->num_chipselect = dws->num_cs;
+	master->cleanup = dw_spi_cleanup;
+	master->setup = dw_spi_setup;
+	master->transfer = dw_spi_transfer;
+
+	dws->dma_inited = 0;
+
+	/* Basic HW init */
+	spi_hw_init(dws);
+
+	/* Initial and start queue */
+	ret = init_queue(dws);
+	if (ret) {
+		dev_err(&master->dev, "problem initializing queue\n");
+		goto err_diable_hw;
+	}
+	ret = start_queue(dws);
+	if (ret) {
+		dev_err(&master->dev, "problem starting queue\n");
+		goto err_diable_hw;
+	}
+
+	spi_master_set_devdata(master, dws);
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&master->dev, "problem registering spi master\n");
+		goto err_queue_alloc;
+	}
+
+	mrst_spi_debugfs_init(dws);
+	return 0;
+
+err_queue_alloc:
+	destroy_queue(dws);
+err_diable_hw:
+	spi_enable_chip(dws, 0);
+	free_irq(dws->irq, dws);
+err_free_master:
+	spi_master_put(master);
+exit:
+	return ret;
+}
+EXPORT_SYMBOL(dw_spi_add_host);
+
+void __devexit dw_spi_remove_host(struct dw_spi *dws)
+{
+	int status = 0;
+
+	if (!dws)
+		return;
+	mrst_spi_debugfs_remove(dws);
+
+	/* Remove the queue */
+	status = destroy_queue(dws);
+	if (status != 0)
+		dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
+			"complete, message memory not freed\n");
+
+	spi_enable_chip(dws, 0);
+	/* Disable clk */
+	spi_set_clk(dws, 0);
+	free_irq(dws->irq, dws);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(dws->master);
+}
+
+int dw_spi_suspend_host(struct dw_spi *dws)
+{
+	int ret = 0;
+
+	ret = stop_queue(dws);
+	if (ret)
+		return ret;
+	spi_enable_chip(dws, 0);
+	spi_set_clk(dws, 0);
+	return ret;
+}
+EXPORT_SYMBOL(dw_spi_suspend_host);
+
+int dw_spi_resume_host(struct dw_spi *dws)
+{
+	int ret;
+
+	spi_hw_init(dws);
+	ret = start_queue(dws);
+	if (ret)
+		dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
+	return ret;
+}
+EXPORT_SYMBOL(dw_spi_resume_host);
+
+MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
+MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
new file mode 100644
index 0000000..34ba691
--- /dev/null
+++ b/drivers/spi/dw_spi_pci.c
@@ -0,0 +1,169 @@
+/*
+ * mrst_spi_pci.c - PCI interface driver for DW SPI Core
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/spi/dw_spi.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "dw_spi_pci"
+
+struct dw_spi_pci {
+	struct pci_dev		*pdev;
+	struct dw_spi		dws;
+};
+
+static int __devinit spi_pci_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct dw_spi_pci *dwpci;
+	struct dw_spi *dws;
+	int pci_bar = 0;
+	int ret;
+
+	printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n",
+		pdev->vendor, pdev->device);
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL);
+	if (!dwpci) {
+		ret = -ENOMEM;
+		goto err_disable;
+	}
+
+	dwpci->pdev = pdev;
+	dws = &dwpci->dws;
+
+	/* Get basic io resource and map it */
+	dws->paddr = pci_resource_start(pdev, pci_bar);
+	dws->iolen = pci_resource_len(pdev, pci_bar);
+
+	ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev));
+	if (ret)
+		goto err_kfree;
+
+	dws->regs = ioremap_nocache((unsigned long)dws->paddr,
+				pci_resource_len(pdev, pci_bar));
+	if (!dws->regs) {
+		ret = -ENOMEM;
+		goto err_release_reg;
+	}
+
+	dws->parent_dev = &pdev->dev;
+	dws->bus_num = 0;
+	dws->num_cs = 4;
+	dws->max_freq = 25000000;	/* for Moorestwon */
+	dws->irq = pdev->irq;
+
+	ret = dw_spi_add_host(dws);
+	if (ret)
+		goto err_unmap;
+
+	/* PCI hook and SPI hook use the same drv data */
+	pci_set_drvdata(pdev, dwpci);
+	return 0;
+
+err_unmap:
+	iounmap(dws->regs);
+err_release_reg:
+	pci_release_region(pdev, pci_bar);
+err_kfree:
+	kfree(dwpci);
+err_disable:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void __devexit spi_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+	iounmap(dwpci->dws.regs);
+	pci_release_region(pdev, 0);
+	kfree(dwpci);
+	pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM
+static int spi_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+	int ret;
+
+	ret = dw_spi_suspend_host(&dwpci->dws);
+	if (ret)
+		return ret;
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return ret;
+}
+
+static int spi_resume(struct pci_dev *pdev)
+{
+	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+	return dw_spi_resume_host(&dwpci->dws);
+}
+#else
+#define spi_suspend	NULL
+#define spi_resume	NULL
+#endif
+
+static const struct pci_device_id pci_ids[] __devinitdata = {
+	/* Intel Moorestown platform SPI controller 0 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
+	{},
+};
+
+static struct pci_driver dw_spi_driver = {
+	.name =		DRIVER_NAME,
+	.id_table =	pci_ids,
+	.probe =	spi_pci_probe,
+	.remove =	__devexit_p(spi_pci_remove),
+	.suspend =	spi_suspend,
+	.resume	=	spi_resume,
+};
+
+static int __init mrst_spi_init(void)
+{
+	return pci_register_driver(&dw_spi_driver);
+}
+
+static void __exit mrst_spi_exit(void)
+{
+	pci_unregister_driver(&dw_spi_driver);
+}
+
+module_init(mrst_spi_init);
+module_exit(mrst_spi_exit);
+
+MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
+MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 73e24ef..1d41058 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -1294,7 +1294,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev)
 		goto out_error_get_res;
 	}
 
-	drv_data->regs_base = ioremap(res->start, (res->end - res->start + 1));
+	drv_data->regs_base = ioremap(res->start, resource_size(res));
 	if (drv_data->regs_base == NULL) {
 		dev_err(dev, "Cannot map IO\n");
 		status = -ENXIO;
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index e9390d7..1fb2a6e 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -1013,7 +1013,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 
 	init_completion(&mpc8xxx_spi->done);
 
-	mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1);
+	mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem));
 	if (mpc8xxx_spi->base == NULL) {
 		ret = -ENOMEM;
 		goto err_ioremap;
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 2765915..c010733 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -1,7 +1,7 @@
 /* linux/drivers/spi/spi_s3c24xx.c
  *
  * Copyright (c) 2006 Ben Dooks
- * Copyright (c) 2006 Simtec Electronics
+ * Copyright 2006-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -28,6 +28,11 @@
 #include <plat/regs-spi.h>
 #include <mach/spi.h>
 
+#include <plat/fiq.h>
+#include <asm/fiq.h>
+
+#include "spi_s3c24xx_fiq.h"
+
 /**
  * s3c24xx_spi_devstate - per device data
  * @hz: Last frequency calculated for @sppre field.
@@ -42,6 +47,13 @@ struct s3c24xx_spi_devstate {
 	u8		sppre;
 };
 
+enum spi_fiq_mode {
+	FIQ_MODE_NONE	= 0,
+	FIQ_MODE_TX	= 1,
+	FIQ_MODE_RX	= 2,
+	FIQ_MODE_TXRX	= 3,
+};
+
 struct s3c24xx_spi {
 	/* bitbang has to be first */
 	struct spi_bitbang	 bitbang;
@@ -52,6 +64,11 @@ struct s3c24xx_spi {
 	int			 len;
 	int			 count;
 
+	struct fiq_handler	 fiq_handler;
+	enum spi_fiq_mode	 fiq_mode;
+	unsigned char		 fiq_inuse;
+	unsigned char		 fiq_claimed;
+
 	void			(*set_cs)(struct s3c2410_spi_info *spi,
 					  int cs, int pol);
 
@@ -67,6 +84,7 @@ struct s3c24xx_spi {
 	struct s3c2410_spi_info *pdata;
 };
 
+
 #define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
 #define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
 
@@ -127,7 +145,7 @@ static int s3c24xx_spi_update_state(struct spi_device *spi,
 	}
 
 	if (spi->mode != cs->mode) {
-		u8 spcon = SPCON_DEFAULT;
+		u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK;
 
 		if (spi->mode & SPI_CPHA)
 			spcon |= S3C2410_SPCON_CPHA_FMTB;
@@ -214,13 +232,196 @@ static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
 	return hw->tx ? hw->tx[count] : 0;
 }
 
+#ifdef CONFIG_SPI_S3C24XX_FIQ
+/* Support for FIQ based pseudo-DMA to improve the transfer speed.
+ *
+ * This code uses the assembly helper in spi_s3c24xx_spi.S which is
+ * used by the FIQ core to move data between main memory and the peripheral
+ * block. Since this is code running on the processor, there is no problem
+ * with cache coherency of the buffers, so we can use any buffer we like.
+ */
+
+/**
+ * struct spi_fiq_code - FIQ code and header
+ * @length: The length of the code fragment, excluding this header.
+ * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at.
+ * @data: The code itself to install as a FIQ handler.
+ */
+struct spi_fiq_code {
+	u32	length;
+	u32	ack_offset;
+	u8	data[0];
+};
+
+extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
+
+/**
+ * ack_bit - turn IRQ into IRQ acknowledgement bit
+ * @irq: The interrupt number
+ *
+ * Returns the bit to write to the interrupt acknowledge register.
+ */
+static inline u32 ack_bit(unsigned int irq)
+{
+	return 1 << (irq - IRQ_EINT0);
+}
+
+/**
+ * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer
+ * @hw: The hardware state.
+ *
+ * Claim the FIQ handler (only one can be active at any one time) and
+ * then setup the correct transfer code for this transfer.
+ *
+ * This call updates all the necessary state information if sucessful,
+ * so the caller does not need to do anything more than start the transfer
+ * as normal, since the IRQ will have been re-routed to the FIQ handler.
+*/
+void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
+{
+	struct pt_regs regs;
+	enum spi_fiq_mode mode;
+	struct spi_fiq_code *code;
+	int ret;
+
+	if (!hw->fiq_claimed) {
+		/* try and claim fiq if we haven't got it, and if not
+		 * then return and simply use another transfer method */
+
+		ret = claim_fiq(&hw->fiq_handler);
+		if (ret)
+			return;
+	}
+
+	if (hw->tx && !hw->rx)
+		mode = FIQ_MODE_TX;
+	else if (hw->rx && !hw->tx)
+		mode = FIQ_MODE_RX;
+	else
+		mode = FIQ_MODE_TXRX;
+
+	regs.uregs[fiq_rspi] = (long)hw->regs;
+	regs.uregs[fiq_rrx]  = (long)hw->rx;
+	regs.uregs[fiq_rtx]  = (long)hw->tx + 1;
+	regs.uregs[fiq_rcount] = hw->len - 1;
+	regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ;
+
+	set_fiq_regs(&regs);
+
+	if (hw->fiq_mode != mode) {
+		u32 *ack_ptr;
+
+		hw->fiq_mode = mode;
+
+		switch (mode) {
+		case FIQ_MODE_TX:
+			code = &s3c24xx_spi_fiq_tx;
+			break;
+		case FIQ_MODE_RX:
+			code = &s3c24xx_spi_fiq_rx;
+			break;
+		case FIQ_MODE_TXRX:
+			code = &s3c24xx_spi_fiq_txrx;
+			break;
+		default:
+			code = NULL;
+		}
+
+		BUG_ON(!code);
+
+		ack_ptr = (u32 *)&code->data[code->ack_offset];
+		*ack_ptr = ack_bit(hw->irq);
+
+		set_fiq_handler(&code->data, code->length);
+	}
+
+	s3c24xx_set_fiq(hw->irq, true);
+
+	hw->fiq_mode = mode;
+	hw->fiq_inuse = 1;
+}
+
+/**
+ * s3c24xx_spi_fiqop - FIQ core code callback
+ * @pw: Data registered with the handler
+ * @release: Whether this is a release or a return.
+ *
+ * Called by the FIQ code when another module wants to use the FIQ, so
+ * return whether we are currently using this or not and then update our
+ * internal state.
+ */
+static int s3c24xx_spi_fiqop(void *pw, int release)
+{
+	struct s3c24xx_spi *hw = pw;
+	int ret = 0;
+
+	if (release) {
+		if (hw->fiq_inuse)
+			ret = -EBUSY;
+
+		/* note, we do not need to unroute the FIQ, as the FIQ
+		 * vector code de-routes it to signal the end of transfer */
+
+		hw->fiq_mode = FIQ_MODE_NONE;
+		hw->fiq_claimed = 0;
+	} else {
+		hw->fiq_claimed = 1;
+	}
+
+	return ret;
+}
+
+/**
+ * s3c24xx_spi_initfiq - setup the information for the FIQ core
+ * @hw: The hardware state.
+ *
+ * Setup the fiq_handler block to pass to the FIQ core.
+ */
+static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw)
+{
+	hw->fiq_handler.dev_id = hw;
+	hw->fiq_handler.name = dev_name(hw->dev);
+	hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop;
+}
+
+/**
+ * s3c24xx_spi_usefiq - return if we should be using FIQ.
+ * @hw: The hardware state.
+ *
+ * Return true if the platform data specifies whether this channel is
+ * allowed to use the FIQ.
+ */
+static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw)
+{
+	return hw->pdata->use_fiq;
+}
+
+/**
+ * s3c24xx_spi_usingfiq - return if channel is using FIQ
+ * @spi: The hardware state.
+ *
+ * Return whether the channel is currently using the FIQ (separate from
+ * whether the FIQ is claimed).
+ */
+static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi)
+{
+	return spi->fiq_inuse;
+}
+#else
+
+static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { }
+static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { }
+static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; }
+static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; }
+
+#endif /* CONFIG_SPI_S3C24XX_FIQ */
+
 static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct s3c24xx_spi *hw = to_hw(spi);
 
-	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-		t->tx_buf, t->rx_buf, t->len);
-
 	hw->tx = t->tx_buf;
 	hw->rx = t->rx_buf;
 	hw->len = t->len;
@@ -228,11 +429,14 @@ static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
 
 	init_completion(&hw->done);
 
+	hw->fiq_inuse = 0;
+	if (s3c24xx_spi_usefiq(hw) && t->len >= 3)
+		s3c24xx_spi_tryfiq(hw);
+
 	/* send the first byte */
 	writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
 
 	wait_for_completion(&hw->done);
-
 	return hw->count;
 }
 
@@ -254,17 +458,27 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
 		goto irq_done;
 	}
 
-	hw->count++;
+	if (!s3c24xx_spi_usingfiq(hw)) {
+		hw->count++;
 
-	if (hw->rx)
-		hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+		if (hw->rx)
+			hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
 
-	count++;
+		count++;
+
+		if (count < hw->len)
+			writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+		else
+			complete(&hw->done);
+	} else {
+		hw->count = hw->len;
+		hw->fiq_inuse = 0;
+
+		if (hw->rx)
+			hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT);
 
-	if (count < hw->len)
-		writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
-	else
 		complete(&hw->done);
+	}
 
  irq_done:
 	return IRQ_HANDLED;
@@ -322,6 +536,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, hw);
 	init_completion(&hw->done);
 
+	/* initialise fiq handler */
+
+	s3c24xx_spi_initfiq(hw);
+
 	/* setup the master state. */
 
 	/* the spi->mode bits understood by this driver: */
diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S
new file mode 100644
index 0000000..3793cae
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_fiq.S
@@ -0,0 +1,116 @@
+/* linux/drivers/spi/spi_s3c24xx_fiq.S
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - FIQ pseudo-DMA transfer code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include <mach/map.h>
+#include <mach/regs-irq.h>
+#include <plat/regs-spi.h>
+
+#include "spi_s3c24xx_fiq.h"
+
+	.text
+
+	@ entry to these routines is as follows, with the register names
+	@ defined in fiq.h so that they can be shared with the C files which
+	@ setup the calling registers.
+	@
+	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
+	@ fiq_rtmp	Temporary register to hold tx/rx data
+	@ fiq_rspi	The base of the SPI register block
+	@ fiq_rtx	The tx buffer pointer
+	@ fiq_rrx	The rx buffer pointer
+	@ fiq_rcount	The number of bytes to move
+
+	@ each entry starts with a word entry of how long it is
+	@ and an offset to the irq acknowledgment word
+
+ENTRY(s3c24xx_spi_fiq_rx)
+s3c24xx_spi_fix_rx:
+	.word	fiq_rx_end - fiq_rx_start
+	.word	fiq_rx_irq_ack - fiq_rx_start
+fiq_rx_start:
+	ldr	fiq_rtmp, fiq_rx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+	strb	fiq_rtmp, [ fiq_rrx ], #1
+
+	mov	fiq_rtmp, #0xff
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subnes	pc, lr, #4		@@ return, still have work to do
+
+	@@ set IRQ controller so that next op will trigger IRQ
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_rx_irq_ack:
+	.word	0
+fiq_rx_end:
+
+ENTRY(s3c24xx_spi_fiq_txrx)
+s3c24xx_spi_fiq_txrx:
+	.word	fiq_txrx_end - fiq_txrx_start
+	.word	fiq_txrx_irq_ack - fiq_txrx_start
+fiq_txrx_start:
+
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+	strb	fiq_rtmp, [ fiq_rrx ], #1
+
+	ldr	fiq_rtmp, fiq_txrx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rtx ], #1
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subnes	pc, lr, #4		@@ return, still have work to do
+
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_txrx_irq_ack:
+	.word	0
+
+fiq_txrx_end:
+
+ENTRY(s3c24xx_spi_fiq_tx)
+s3c24xx_spi_fix_tx:
+	.word	fiq_tx_end - fiq_tx_start
+	.word	fiq_tx_irq_ack - fiq_tx_start
+fiq_tx_start:
+	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
+
+	ldr	fiq_rtmp, fiq_tx_irq_ack
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+	ldrb	fiq_rtmp, [ fiq_rtx ], #1
+	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+	subs	fiq_rcount, fiq_rcount, #1
+	subnes	pc, lr, #4		@@ return, still have work to do
+
+	mov	fiq_rtmp, #0
+	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
+	subs	pc, lr, #4
+
+fiq_tx_irq_ack:
+	.word	0
+
+fiq_tx_end:
+
+	.end
diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi_s3c24xx_fiq.h
new file mode 100644
index 0000000..a5950bb
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_fiq.h
@@ -0,0 +1,26 @@
+/* linux/drivers/spi/spi_s3c24xx_fiq.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - FIQ pseudo-DMA transfer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* We have R8 through R13 to play with */
+
+#ifdef __ASSEMBLY__
+#define __REG_NR(x)     r##x
+#else
+#define __REG_NR(x)     (x)
+#endif
+
+#define fiq_rspi	__REG_NR(8)
+#define fiq_rtmp	__REG_NR(9)
+#define fiq_rrx		__REG_NR(10)
+#define fiq_rtx		__REG_NR(11)
+#define fiq_rcount	__REG_NR(12)
+#define fiq_rirq	__REG_NR(13)
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
new file mode 100644
index 0000000..88a456d
--- /dev/null
+++ b/drivers/spi/spi_s3c64xx.c
@@ -0,0 +1,1196 @@
+/* linux/drivers/spi/spi_s3c64xx.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/dma.h>
+#include <plat/spi.h>
+
+/* Registers and bit-fields */
+
+#define S3C64XX_SPI_CH_CFG		0x00
+#define S3C64XX_SPI_CLK_CFG		0x04
+#define S3C64XX_SPI_MODE_CFG	0x08
+#define S3C64XX_SPI_SLAVE_SEL	0x0C
+#define S3C64XX_SPI_INT_EN		0x10
+#define S3C64XX_SPI_STATUS		0x14
+#define S3C64XX_SPI_TX_DATA		0x18
+#define S3C64XX_SPI_RX_DATA		0x1C
+#define S3C64XX_SPI_PACKET_CNT	0x20
+#define S3C64XX_SPI_PENDING_CLR	0x24
+#define S3C64XX_SPI_SWAP_CFG	0x28
+#define S3C64XX_SPI_FB_CLK		0x2C
+
+#define S3C64XX_SPI_CH_HS_EN		(1<<6)	/* High Speed Enable */
+#define S3C64XX_SPI_CH_SW_RST		(1<<5)
+#define S3C64XX_SPI_CH_SLAVE		(1<<4)
+#define S3C64XX_SPI_CPOL_L		(1<<3)
+#define S3C64XX_SPI_CPHA_B		(1<<2)
+#define S3C64XX_SPI_CH_RXCH_ON		(1<<1)
+#define S3C64XX_SPI_CH_TXCH_ON		(1<<0)
+
+#define S3C64XX_SPI_CLKSEL_SRCMSK	(3<<9)
+#define S3C64XX_SPI_CLKSEL_SRCSHFT	9
+#define S3C64XX_SPI_ENCLK_ENABLE	(1<<8)
+#define S3C64XX_SPI_PSR_MASK 		0xff
+
+#define S3C64XX_SPI_MODE_CH_TSZ_BYTE		(0<<29)
+#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD	(1<<29)
+#define S3C64XX_SPI_MODE_CH_TSZ_WORD		(2<<29)
+#define S3C64XX_SPI_MODE_CH_TSZ_MASK		(3<<29)
+#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE		(0<<17)
+#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD	(1<<17)
+#define S3C64XX_SPI_MODE_BUS_TSZ_WORD		(2<<17)
+#define S3C64XX_SPI_MODE_BUS_TSZ_MASK		(3<<17)
+#define S3C64XX_SPI_MODE_RXDMA_ON		(1<<2)
+#define S3C64XX_SPI_MODE_TXDMA_ON		(1<<1)
+#define S3C64XX_SPI_MODE_4BURST			(1<<0)
+
+#define S3C64XX_SPI_SLAVE_AUTO			(1<<1)
+#define S3C64XX_SPI_SLAVE_SIG_INACT		(1<<0)
+
+#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL)
+
+#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \
+					(c)->regs + S3C64XX_SPI_SLAVE_SEL)
+
+#define S3C64XX_SPI_INT_TRAILING_EN		(1<<6)
+#define S3C64XX_SPI_INT_RX_OVERRUN_EN		(1<<5)
+#define S3C64XX_SPI_INT_RX_UNDERRUN_EN		(1<<4)
+#define S3C64XX_SPI_INT_TX_OVERRUN_EN		(1<<3)
+#define S3C64XX_SPI_INT_TX_UNDERRUN_EN		(1<<2)
+#define S3C64XX_SPI_INT_RX_FIFORDY_EN		(1<<1)
+#define S3C64XX_SPI_INT_TX_FIFORDY_EN		(1<<0)
+
+#define S3C64XX_SPI_ST_RX_OVERRUN_ERR		(1<<5)
+#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR	(1<<4)
+#define S3C64XX_SPI_ST_TX_OVERRUN_ERR		(1<<3)
+#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR	(1<<2)
+#define S3C64XX_SPI_ST_RX_FIFORDY		(1<<1)
+#define S3C64XX_SPI_ST_TX_FIFORDY		(1<<0)
+
+#define S3C64XX_SPI_PACKET_CNT_EN		(1<<16)
+
+#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR		(1<<4)
+#define S3C64XX_SPI_PND_TX_OVERRUN_CLR		(1<<3)
+#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR		(1<<2)
+#define S3C64XX_SPI_PND_RX_OVERRUN_CLR		(1<<1)
+#define S3C64XX_SPI_PND_TRAILING_CLR		(1<<0)
+
+#define S3C64XX_SPI_SWAP_RX_HALF_WORD		(1<<7)
+#define S3C64XX_SPI_SWAP_RX_BYTE		(1<<6)
+#define S3C64XX_SPI_SWAP_RX_BIT			(1<<5)
+#define S3C64XX_SPI_SWAP_RX_EN			(1<<4)
+#define S3C64XX_SPI_SWAP_TX_HALF_WORD		(1<<3)
+#define S3C64XX_SPI_SWAP_TX_BYTE		(1<<2)
+#define S3C64XX_SPI_SWAP_TX_BIT			(1<<1)
+#define S3C64XX_SPI_SWAP_TX_EN			(1<<0)
+
+#define S3C64XX_SPI_FBCLK_MSK		(3<<0)
+
+#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \
+					(((i)->fifo_lvl_mask + 1))) \
+					? 1 : 0)
+
+#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \
+					(((i)->fifo_lvl_mask + 1) << 1)) \
+					? 1 : 0)
+#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
+#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
+
+#define S3C64XX_SPI_MAX_TRAILCNT	0x3ff
+#define S3C64XX_SPI_TRAILCNT_OFF	19
+
+#define S3C64XX_SPI_TRAILCNT		S3C64XX_SPI_MAX_TRAILCNT
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+#define SUSPND    (1<<0)
+#define SPIBUSY   (1<<1)
+#define RXBUSY    (1<<2)
+#define TXBUSY    (1<<3)
+
+/**
+ * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
+ * @clk: Pointer to the spi clock.
+ * @master: Pointer to the SPI Protocol master.
+ * @workqueue: Work queue for the SPI xfer requests.
+ * @cntrlr_info: Platform specific data for the controller this driver manages.
+ * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
+ * @work: Work
+ * @queue: To log SPI xfer requests.
+ * @lock: Controller specific lock.
+ * @state: Set of FLAGS to indicate status.
+ * @rx_dmach: Controller's DMA channel for Rx.
+ * @tx_dmach: Controller's DMA channel for Tx.
+ * @sfr_start: BUS address of SPI controller regs.
+ * @regs: Pointer to ioremap'ed controller registers.
+ * @xfer_completion: To indicate completion of xfer task.
+ * @cur_mode: Stores the active configuration of the controller.
+ * @cur_bpw: Stores the active bits per word settings.
+ * @cur_speed: Stores the active xfer clock speed.
+ */
+struct s3c64xx_spi_driver_data {
+	void __iomem                    *regs;
+	struct clk                      *clk;
+	struct platform_device          *pdev;
+	struct spi_master               *master;
+	struct workqueue_struct	        *workqueue;
+	struct s3c64xx_spi_cntrlr_info  *cntrlr_info;
+	struct spi_device               *tgl_spi;
+	struct work_struct              work;
+	struct list_head                queue;
+	spinlock_t                      lock;
+	enum dma_ch                     rx_dmach;
+	enum dma_ch                     tx_dmach;
+	unsigned long                   sfr_start;
+	struct completion               xfer_completion;
+	unsigned                        state;
+	unsigned                        cur_mode, cur_bpw;
+	unsigned                        cur_speed;
+};
+
+static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
+	.name = "samsung-spi-dma",
+};
+
+static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	void __iomem *regs = sdd->regs;
+	unsigned long loops;
+	u32 val;
+
+	writel(0, regs + S3C64XX_SPI_PACKET_CNT);
+
+	val = readl(regs + S3C64XX_SPI_CH_CFG);
+	val |= S3C64XX_SPI_CH_SW_RST;
+	val &= ~S3C64XX_SPI_CH_HS_EN;
+	writel(val, regs + S3C64XX_SPI_CH_CFG);
+
+	/* Flush TxFIFO*/
+	loops = msecs_to_loops(1);
+	do {
+		val = readl(regs + S3C64XX_SPI_STATUS);
+	} while (TX_FIFO_LVL(val, sci) && loops--);
+
+	/* Flush RxFIFO*/
+	loops = msecs_to_loops(1);
+	do {
+		val = readl(regs + S3C64XX_SPI_STATUS);
+		if (RX_FIFO_LVL(val, sci))
+			readl(regs + S3C64XX_SPI_RX_DATA);
+		else
+			break;
+	} while (loops--);
+
+	val = readl(regs + S3C64XX_SPI_CH_CFG);
+	val &= ~S3C64XX_SPI_CH_SW_RST;
+	writel(val, regs + S3C64XX_SPI_CH_CFG);
+
+	val = readl(regs + S3C64XX_SPI_MODE_CFG);
+	val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
+	writel(val, regs + S3C64XX_SPI_MODE_CFG);
+
+	val = readl(regs + S3C64XX_SPI_CH_CFG);
+	val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
+	writel(val, regs + S3C64XX_SPI_CH_CFG);
+}
+
+static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
+				struct spi_device *spi,
+				struct spi_transfer *xfer, int dma_mode)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	void __iomem *regs = sdd->regs;
+	u32 modecfg, chcfg;
+
+	modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
+	modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
+
+	chcfg = readl(regs + S3C64XX_SPI_CH_CFG);
+	chcfg &= ~S3C64XX_SPI_CH_TXCH_ON;
+
+	if (dma_mode) {
+		chcfg &= ~S3C64XX_SPI_CH_RXCH_ON;
+	} else {
+		/* Always shift in data in FIFO, even if xfer is Tx only,
+		 * this helps setting PCKT_CNT value for generating clocks
+		 * as exactly needed.
+		 */
+		chcfg |= S3C64XX_SPI_CH_RXCH_ON;
+		writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
+					| S3C64XX_SPI_PACKET_CNT_EN,
+					regs + S3C64XX_SPI_PACKET_CNT);
+	}
+
+	if (xfer->tx_buf != NULL) {
+		sdd->state |= TXBUSY;
+		chcfg |= S3C64XX_SPI_CH_TXCH_ON;
+		if (dma_mode) {
+			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
+			s3c2410_dma_config(sdd->tx_dmach, 1);
+			s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
+						xfer->tx_dma, xfer->len);
+			s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+		} else {
+			unsigned char *buf = (unsigned char *) xfer->tx_buf;
+			int i = 0;
+			while (i < xfer->len)
+				writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA);
+		}
+	}
+
+	if (xfer->rx_buf != NULL) {
+		sdd->state |= RXBUSY;
+
+		if (sci->high_speed && sdd->cur_speed >= 30000000UL
+					&& !(sdd->cur_mode & SPI_CPHA))
+			chcfg |= S3C64XX_SPI_CH_HS_EN;
+
+		if (dma_mode) {
+			modecfg |= S3C64XX_SPI_MODE_RXDMA_ON;
+			chcfg |= S3C64XX_SPI_CH_RXCH_ON;
+			writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
+					| S3C64XX_SPI_PACKET_CNT_EN,
+					regs + S3C64XX_SPI_PACKET_CNT);
+			s3c2410_dma_config(sdd->rx_dmach, 1);
+			s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
+						xfer->rx_dma, xfer->len);
+			s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+		}
+	}
+
+	writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
+	writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
+}
+
+static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
+						struct spi_device *spi)
+{
+	struct s3c64xx_spi_csinfo *cs;
+
+	if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
+		if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
+			/* Deselect the last toggled device */
+			cs = sdd->tgl_spi->controller_data;
+			cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+		}
+		sdd->tgl_spi = NULL;
+	}
+
+	cs = spi->controller_data;
+	cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0);
+}
+
+static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
+				struct spi_transfer *xfer, int dma_mode)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	void __iomem *regs = sdd->regs;
+	unsigned long val;
+	int ms;
+
+	/* millisecs to xfer 'len' bytes @ 'cur_speed' */
+	ms = xfer->len * 8 * 1000 / sdd->cur_speed;
+	ms += 5; /* some tolerance */
+
+	if (dma_mode) {
+		val = msecs_to_jiffies(ms) + 10;
+		val = wait_for_completion_timeout(&sdd->xfer_completion, val);
+	} else {
+		val = msecs_to_loops(ms);
+		do {
+			val = readl(regs + S3C64XX_SPI_STATUS);
+		} while (RX_FIFO_LVL(val, sci) < xfer->len && --val);
+	}
+
+	if (!val)
+		return -EIO;
+
+	if (dma_mode) {
+		u32 status;
+
+		/*
+		 * DmaTx returns after simply writing data in the FIFO,
+		 * w/o waiting for real transmission on the bus to finish.
+		 * DmaRx returns only after Dma read data from FIFO which
+		 * needs bus transmission to finish, so we don't worry if
+		 * Xfer involved Rx(with or without Tx).
+		 */
+		if (xfer->rx_buf == NULL) {
+			val = msecs_to_loops(10);
+			status = readl(regs + S3C64XX_SPI_STATUS);
+			while ((TX_FIFO_LVL(status, sci)
+				|| !S3C64XX_SPI_ST_TX_DONE(status, sci))
+					&& --val) {
+				cpu_relax();
+				status = readl(regs + S3C64XX_SPI_STATUS);
+			}
+
+			if (!val)
+				return -EIO;
+		}
+	} else {
+		unsigned char *buf;
+		int i;
+
+		/* If it was only Tx */
+		if (xfer->rx_buf == NULL) {
+			sdd->state &= ~TXBUSY;
+			return 0;
+		}
+
+		i = 0;
+		buf = xfer->rx_buf;
+		while (i < xfer->len)
+			buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA);
+
+		sdd->state &= ~RXBUSY;
+	}
+
+	return 0;
+}
+
+static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
+						struct spi_device *spi)
+{
+	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
+
+	if (sdd->tgl_spi == spi)
+		sdd->tgl_spi = NULL;
+
+	cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+}
+
+static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	void __iomem *regs = sdd->regs;
+	u32 val;
+
+	/* Disable Clock */
+	val = readl(regs + S3C64XX_SPI_CLK_CFG);
+	val &= ~S3C64XX_SPI_ENCLK_ENABLE;
+	writel(val, regs + S3C64XX_SPI_CLK_CFG);
+
+	/* Set Polarity and Phase */
+	val = readl(regs + S3C64XX_SPI_CH_CFG);
+	val &= ~(S3C64XX_SPI_CH_SLAVE |
+			S3C64XX_SPI_CPOL_L |
+			S3C64XX_SPI_CPHA_B);
+
+	if (sdd->cur_mode & SPI_CPOL)
+		val |= S3C64XX_SPI_CPOL_L;
+
+	if (sdd->cur_mode & SPI_CPHA)
+		val |= S3C64XX_SPI_CPHA_B;
+
+	writel(val, regs + S3C64XX_SPI_CH_CFG);
+
+	/* Set Channel & DMA Mode */
+	val = readl(regs + S3C64XX_SPI_MODE_CFG);
+	val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK
+			| S3C64XX_SPI_MODE_CH_TSZ_MASK);
+
+	switch (sdd->cur_bpw) {
+	case 32:
+		val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD;
+		break;
+	case 16:
+		val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD;
+		break;
+	default:
+		val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE;
+		break;
+	}
+	val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */
+
+	writel(val, regs + S3C64XX_SPI_MODE_CFG);
+
+	/* Configure Clock */
+	val = readl(regs + S3C64XX_SPI_CLK_CFG);
+	val &= ~S3C64XX_SPI_PSR_MASK;
+	val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1)
+			& S3C64XX_SPI_PSR_MASK);
+	writel(val, regs + S3C64XX_SPI_CLK_CFG);
+
+	/* Enable Clock */
+	val = readl(regs + S3C64XX_SPI_CLK_CFG);
+	val |= S3C64XX_SPI_ENCLK_ENABLE;
+	writel(val, regs + S3C64XX_SPI_CLK_CFG);
+}
+
+void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
+				int size, enum s3c2410_dma_buffresult res)
+{
+	struct s3c64xx_spi_driver_data *sdd = buf_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	if (res == S3C2410_RES_OK)
+		sdd->state &= ~RXBUSY;
+	else
+		dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
+
+	/* If the other done */
+	if (!(sdd->state & TXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
+				int size, enum s3c2410_dma_buffresult res)
+{
+	struct s3c64xx_spi_driver_data *sdd = buf_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	if (res == S3C2410_RES_OK)
+		sdd->state &= ~TXBUSY;
+	else
+		dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
+
+	/* If the other done */
+	if (!(sdd->state & RXBUSY))
+		complete(&sdd->xfer_completion);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
+
+static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
+						struct spi_message *msg)
+{
+	struct device *dev = &sdd->pdev->dev;
+	struct spi_transfer *xfer;
+
+	if (msg->is_dma_mapped)
+		return 0;
+
+	/* First mark all xfer unmapped */
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		xfer->rx_dma = XFER_DMAADDR_INVALID;
+		xfer->tx_dma = XFER_DMAADDR_INVALID;
+	}
+
+	/* Map until end or first fail */
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+
+		if (xfer->tx_buf != NULL) {
+			xfer->tx_dma = dma_map_single(dev, xfer->tx_buf,
+						xfer->len, DMA_TO_DEVICE);
+			if (dma_mapping_error(dev, xfer->tx_dma)) {
+				dev_err(dev, "dma_map_single Tx failed\n");
+				xfer->tx_dma = XFER_DMAADDR_INVALID;
+				return -ENOMEM;
+			}
+		}
+
+		if (xfer->rx_buf != NULL) {
+			xfer->rx_dma = dma_map_single(dev, xfer->rx_buf,
+						xfer->len, DMA_FROM_DEVICE);
+			if (dma_mapping_error(dev, xfer->rx_dma)) {
+				dev_err(dev, "dma_map_single Rx failed\n");
+				dma_unmap_single(dev, xfer->tx_dma,
+						xfer->len, DMA_TO_DEVICE);
+				xfer->tx_dma = XFER_DMAADDR_INVALID;
+				xfer->rx_dma = XFER_DMAADDR_INVALID;
+				return -ENOMEM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
+						struct spi_message *msg)
+{
+	struct device *dev = &sdd->pdev->dev;
+	struct spi_transfer *xfer;
+
+	if (msg->is_dma_mapped)
+		return;
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+
+		if (xfer->rx_buf != NULL
+				&& xfer->rx_dma != XFER_DMAADDR_INVALID)
+			dma_unmap_single(dev, xfer->rx_dma,
+						xfer->len, DMA_FROM_DEVICE);
+
+		if (xfer->tx_buf != NULL
+				&& xfer->tx_dma != XFER_DMAADDR_INVALID)
+			dma_unmap_single(dev, xfer->tx_dma,
+						xfer->len, DMA_TO_DEVICE);
+	}
+}
+
+static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
+					struct spi_message *msg)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct spi_device *spi = msg->spi;
+	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
+	struct spi_transfer *xfer;
+	int status = 0, cs_toggle = 0;
+	u32 speed;
+	u8 bpw;
+
+	/* If Master's(controller) state differs from that needed by Slave */
+	if (sdd->cur_speed != spi->max_speed_hz
+			|| sdd->cur_mode != spi->mode
+			|| sdd->cur_bpw != spi->bits_per_word) {
+		sdd->cur_bpw = spi->bits_per_word;
+		sdd->cur_speed = spi->max_speed_hz;
+		sdd->cur_mode = spi->mode;
+		s3c64xx_spi_config(sdd);
+	}
+
+	/* Map all the transfers if needed */
+	if (s3c64xx_spi_map_mssg(sdd, msg)) {
+		dev_err(&spi->dev,
+			"Xfer: Unable to map message buffers!\n");
+		status = -ENOMEM;
+		goto out;
+	}
+
+	/* Configure feedback delay */
+	writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+
+		unsigned long flags;
+		int use_dma;
+
+		INIT_COMPLETION(sdd->xfer_completion);
+
+		/* Only BPW and Speed may change across transfers */
+		bpw = xfer->bits_per_word ? : spi->bits_per_word;
+		speed = xfer->speed_hz ? : spi->max_speed_hz;
+
+		if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
+			sdd->cur_bpw = bpw;
+			sdd->cur_speed = speed;
+			s3c64xx_spi_config(sdd);
+		}
+
+		/* Polling method for xfers not bigger than FIFO capacity */
+		if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
+			use_dma = 0;
+		else
+			use_dma = 1;
+
+		spin_lock_irqsave(&sdd->lock, flags);
+
+		/* Pending only which is to be done */
+		sdd->state &= ~RXBUSY;
+		sdd->state &= ~TXBUSY;
+
+		enable_datapath(sdd, spi, xfer, use_dma);
+
+		/* Slave Select */
+		enable_cs(sdd, spi);
+
+		/* Start the signals */
+		S3C64XX_SPI_ACT(sdd);
+
+		spin_unlock_irqrestore(&sdd->lock, flags);
+
+		status = wait_for_xfer(sdd, xfer, use_dma);
+
+		/* Quiese the signals */
+		S3C64XX_SPI_DEACT(sdd);
+
+		if (status) {
+			dev_err(&spi->dev, "I/O Error: \
+				rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+				xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
+				(sdd->state & RXBUSY) ? 'f' : 'p',
+				(sdd->state & TXBUSY) ? 'f' : 'p',
+				xfer->len);
+
+			if (use_dma) {
+				if (xfer->tx_buf != NULL
+						&& (sdd->state & TXBUSY))
+					s3c2410_dma_ctrl(sdd->tx_dmach,
+							S3C2410_DMAOP_FLUSH);
+				if (xfer->rx_buf != NULL
+						&& (sdd->state & RXBUSY))
+					s3c2410_dma_ctrl(sdd->rx_dmach,
+							S3C2410_DMAOP_FLUSH);
+			}
+
+			goto out;
+		}
+
+		if (xfer->delay_usecs)
+			udelay(xfer->delay_usecs);
+
+		if (xfer->cs_change) {
+			/* Hint that the next mssg is gonna be
+			   for the same device */
+			if (list_is_last(&xfer->transfer_list,
+						&msg->transfers))
+				cs_toggle = 1;
+			else
+				disable_cs(sdd, spi);
+		}
+
+		msg->actual_length += xfer->len;
+
+		flush_fifo(sdd);
+	}
+
+out:
+	if (!cs_toggle || status)
+		disable_cs(sdd, spi);
+	else
+		sdd->tgl_spi = spi;
+
+	s3c64xx_spi_unmap_mssg(sdd, msg);
+
+	msg->status = status;
+
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
+{
+	if (s3c2410_dma_request(sdd->rx_dmach,
+					&s3c64xx_spi_dma_client, NULL) < 0) {
+		dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
+		return 0;
+	}
+	s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
+	s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
+					sdd->sfr_start + S3C64XX_SPI_RX_DATA);
+
+	if (s3c2410_dma_request(sdd->tx_dmach,
+					&s3c64xx_spi_dma_client, NULL) < 0) {
+		dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
+		s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+		return 0;
+	}
+	s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
+	s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
+					sdd->sfr_start + S3C64XX_SPI_TX_DATA);
+
+	return 1;
+}
+
+static void s3c64xx_spi_work(struct work_struct *work)
+{
+	struct s3c64xx_spi_driver_data *sdd = container_of(work,
+					struct s3c64xx_spi_driver_data, work);
+	unsigned long flags;
+
+	/* Acquire DMA channels */
+	while (!acquire_dma(sdd))
+		msleep(10);
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	while (!list_empty(&sdd->queue)
+				&& !(sdd->state & SUSPND)) {
+
+		struct spi_message *msg;
+
+		msg = container_of(sdd->queue.next, struct spi_message, queue);
+
+		list_del_init(&msg->queue);
+
+		/* Set Xfer busy flag */
+		sdd->state |= SPIBUSY;
+
+		spin_unlock_irqrestore(&sdd->lock, flags);
+
+		handle_msg(sdd, msg);
+
+		spin_lock_irqsave(&sdd->lock, flags);
+
+		sdd->state &= ~SPIBUSY;
+	}
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	/* Free DMA channels */
+	s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
+	s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+}
+
+static int s3c64xx_spi_transfer(struct spi_device *spi,
+						struct spi_message *msg)
+{
+	struct s3c64xx_spi_driver_data *sdd;
+	unsigned long flags;
+
+	sdd = spi_master_get_devdata(spi->master);
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	if (sdd->state & SUSPND) {
+		spin_unlock_irqrestore(&sdd->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->status = -EINPROGRESS;
+	msg->actual_length = 0;
+
+	list_add_tail(&msg->queue, &sdd->queue);
+
+	queue_work(sdd->workqueue, &sdd->work);
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Here we only check the validity of requested configuration
+ * and save the configuration in a local data-structure.
+ * The controller is actually configured only just before we
+ * get a message to transfer.
+ */
+static int s3c64xx_spi_setup(struct spi_device *spi)
+{
+	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
+	struct s3c64xx_spi_driver_data *sdd;
+	struct s3c64xx_spi_cntrlr_info *sci;
+	struct spi_message *msg;
+	u32 psr, speed;
+	unsigned long flags;
+	int err = 0;
+
+	if (cs == NULL || cs->set_level == NULL) {
+		dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
+		return -ENODEV;
+	}
+
+	sdd = spi_master_get_devdata(spi->master);
+	sci = sdd->cntrlr_info;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	list_for_each_entry(msg, &sdd->queue, queue) {
+		/* Is some mssg is already queued for this device */
+		if (msg->spi == spi) {
+			dev_err(&spi->dev,
+				"setup: attempt while mssg in queue!\n");
+			spin_unlock_irqrestore(&sdd->lock, flags);
+			return -EBUSY;
+		}
+	}
+
+	if (sdd->state & SUSPND) {
+		spin_unlock_irqrestore(&sdd->lock, flags);
+		dev_err(&spi->dev,
+			"setup: SPI-%d not active!\n", spi->master->bus_num);
+		return -ESHUTDOWN;
+	}
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	if (spi->bits_per_word != 8
+			&& spi->bits_per_word != 16
+			&& spi->bits_per_word != 32) {
+		dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n",
+							spi->bits_per_word);
+		err = -EINVAL;
+		goto setup_exit;
+	}
+
+	/* Check if we can provide the requested rate */
+	speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */
+
+	if (spi->max_speed_hz > speed)
+		spi->max_speed_hz = speed;
+
+	psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1;
+	psr &= S3C64XX_SPI_PSR_MASK;
+	if (psr == S3C64XX_SPI_PSR_MASK)
+		psr--;
+
+	speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+	if (spi->max_speed_hz < speed) {
+		if (psr+1 < S3C64XX_SPI_PSR_MASK) {
+			psr++;
+		} else {
+			err = -EINVAL;
+			goto setup_exit;
+		}
+	}
+
+	speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+	if (spi->max_speed_hz >= speed)
+		spi->max_speed_hz = speed;
+	else
+		err = -EINVAL;
+
+setup_exit:
+
+	/* setup() returns with device de-selected */
+	disable_cs(sdd, spi);
+
+	return err;
+}
+
+static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
+{
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	void __iomem *regs = sdd->regs;
+	unsigned int val;
+
+	sdd->cur_speed = 0;
+
+	S3C64XX_SPI_DEACT(sdd);
+
+	/* Disable Interrupts - we use Polling if not DMA mode */
+	writel(0, regs + S3C64XX_SPI_INT_EN);
+
+	writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
+				regs + S3C64XX_SPI_CLK_CFG);
+	writel(0, regs + S3C64XX_SPI_MODE_CFG);
+	writel(0, regs + S3C64XX_SPI_PACKET_CNT);
+
+	/* Clear any irq pending bits */
+	writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
+				regs + S3C64XX_SPI_PENDING_CLR);
+
+	writel(0, regs + S3C64XX_SPI_SWAP_CFG);
+
+	val = readl(regs + S3C64XX_SPI_MODE_CFG);
+	val &= ~S3C64XX_SPI_MODE_4BURST;
+	val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
+	val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
+	writel(val, regs + S3C64XX_SPI_MODE_CFG);
+
+	flush_fifo(sdd);
+}
+
+static int __init s3c64xx_spi_probe(struct platform_device *pdev)
+{
+	struct resource	*mem_res, *dmatx_res, *dmarx_res;
+	struct s3c64xx_spi_driver_data *sdd;
+	struct s3c64xx_spi_cntrlr_info *sci;
+	struct spi_master *master;
+	int ret;
+
+	if (pdev->id < 0) {
+		dev_err(&pdev->dev,
+				"Invalid platform device id-%d\n", pdev->id);
+		return -ENODEV;
+	}
+
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "platform_data missing!\n");
+		return -ENODEV;
+	}
+
+	/* Check for availability of necessary resource */
+
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (dmatx_res == NULL) {
+		dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (dmarx_res == NULL) {
+		dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res == NULL) {
+		dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
+		return -ENXIO;
+	}
+
+	master = spi_alloc_master(&pdev->dev,
+				sizeof(struct s3c64xx_spi_driver_data));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
+		return -ENOMEM;
+	}
+
+	sci = pdev->dev.platform_data;
+
+	platform_set_drvdata(pdev, master);
+
+	sdd = spi_master_get_devdata(master);
+	sdd->master = master;
+	sdd->cntrlr_info = sci;
+	sdd->pdev = pdev;
+	sdd->sfr_start = mem_res->start;
+	sdd->tx_dmach = dmatx_res->start;
+	sdd->rx_dmach = dmarx_res->start;
+
+	sdd->cur_bpw = 8;
+
+	master->bus_num = pdev->id;
+	master->setup = s3c64xx_spi_setup;
+	master->transfer = s3c64xx_spi_transfer;
+	master->num_chipselect = sci->num_cs;
+	master->dma_alignment = 8;
+	/* the spi->mode bits understood by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
+	if (request_mem_region(mem_res->start,
+			resource_size(mem_res), pdev->name) == NULL) {
+		dev_err(&pdev->dev, "Req mem region failed\n");
+		ret = -ENXIO;
+		goto err0;
+	}
+
+	sdd->regs = ioremap(mem_res->start, resource_size(mem_res));
+	if (sdd->regs == NULL) {
+		dev_err(&pdev->dev, "Unable to remap IO\n");
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to config gpio\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	/* Setup clocks */
+	sdd->clk = clk_get(&pdev->dev, "spi");
+	if (IS_ERR(sdd->clk)) {
+		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
+		ret = PTR_ERR(sdd->clk);
+		goto err3;
+	}
+
+	if (clk_enable(sdd->clk)) {
+		dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
+		ret = -EBUSY;
+		goto err4;
+	}
+
+	if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK)
+		sci->src_clk = sdd->clk;
+	else
+		sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+	if (IS_ERR(sci->src_clk)) {
+		dev_err(&pdev->dev,
+			"Unable to acquire clock '%s'\n", sci->src_clk_name);
+		ret = PTR_ERR(sci->src_clk);
+		goto err5;
+	}
+
+	if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) {
+		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
+							sci->src_clk_name);
+		ret = -EBUSY;
+		goto err6;
+	}
+
+	sdd->workqueue = create_singlethread_workqueue(
+						dev_name(master->dev.parent));
+	if (sdd->workqueue == NULL) {
+		dev_err(&pdev->dev, "Unable to create workqueue\n");
+		ret = -ENOMEM;
+		goto err7;
+	}
+
+	/* Setup Deufult Mode */
+	s3c64xx_spi_hwinit(sdd, pdev->id);
+
+	spin_lock_init(&sdd->lock);
+	init_completion(&sdd->xfer_completion);
+	INIT_WORK(&sdd->work, s3c64xx_spi_work);
+	INIT_LIST_HEAD(&sdd->queue);
+
+	if (spi_register_master(master)) {
+		dev_err(&pdev->dev, "cannot register SPI master\n");
+		ret = -EBUSY;
+		goto err8;
+	}
+
+	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \
+					with %d Slaves attached\n",
+					pdev->id, master->num_chipselect);
+	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\
+					\tDMA=[Rx-%d, Tx-%d]\n",
+					mem_res->end, mem_res->start,
+					sdd->rx_dmach, sdd->tx_dmach);
+
+	return 0;
+
+err8:
+	destroy_workqueue(sdd->workqueue);
+err7:
+	if (sci->src_clk != sdd->clk)
+		clk_disable(sci->src_clk);
+err6:
+	if (sci->src_clk != sdd->clk)
+		clk_put(sci->src_clk);
+err5:
+	clk_disable(sdd->clk);
+err4:
+	clk_put(sdd->clk);
+err3:
+err2:
+	iounmap((void *) sdd->regs);
+err1:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err0:
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(master);
+
+	return ret;
+}
+
+static int s3c64xx_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct resource	*mem_res;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+	sdd->state |= SUSPND;
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	while (sdd->state & SPIBUSY)
+		msleep(10);
+
+	spi_unregister_master(master);
+
+	destroy_workqueue(sdd->workqueue);
+
+	if (sci->src_clk != sdd->clk)
+		clk_disable(sci->src_clk);
+
+	if (sci->src_clk != sdd->clk)
+		clk_put(sci->src_clk);
+
+	clk_disable(sdd->clk);
+	clk_put(sdd->clk);
+
+	iounmap((void *) sdd->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(master);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_csinfo *cs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdd->lock, flags);
+	sdd->state |= SUSPND;
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	while (sdd->state & SPIBUSY)
+		msleep(10);
+
+	/* Disable the clock */
+	if (sci->src_clk != sdd->clk)
+		clk_disable(sci->src_clk);
+
+	clk_disable(sdd->clk);
+
+	sdd->cur_speed = 0; /* Output Clock is stopped */
+
+	return 0;
+}
+
+static int s3c64xx_spi_resume(struct platform_device *pdev)
+{
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	unsigned long flags;
+
+	sci->cfg_gpio(pdev);
+
+	/* Enable the clock */
+	if (sci->src_clk != sdd->clk)
+		clk_enable(sci->src_clk);
+
+	clk_enable(sdd->clk);
+
+	s3c64xx_spi_hwinit(sdd, pdev->id);
+
+	spin_lock_irqsave(&sdd->lock, flags);
+	sdd->state &= ~SUSPND;
+	spin_unlock_irqrestore(&sdd->lock, flags);
+
+	return 0;
+}
+#else
+#define s3c64xx_spi_suspend	NULL
+#define s3c64xx_spi_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver s3c64xx_spi_driver = {
+	.driver = {
+		.name	= "s3c64xx-spi",
+		.owner = THIS_MODULE,
+	},
+	.remove = s3c64xx_spi_remove,
+	.suspend = s3c64xx_spi_suspend,
+	.resume = s3c64xx_spi_resume,
+};
+MODULE_ALIAS("platform:s3c64xx-spi");
+
+static int __init s3c64xx_spi_init(void)
+{
+	return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
+}
+module_init(s3c64xx_spi_init);
+
+static void __exit s3c64xx_spi_exit(void)
+{
+	platform_driver_unregister(&s3c64xx_spi_driver);
+}
+module_exit(s3c64xx_spi_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("S3C64XX SPI Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c
index 7d36720..a65c12f 100644
--- a/drivers/spi/spi_sh_sci.c
+++ b/drivers/spi/spi_sh_sci.c
@@ -148,7 +148,7 @@ static int sh_sci_spi_probe(struct platform_device *dev)
 		ret = -ENOENT;
 		goto err1;
 	}
-	sp->membase = ioremap(r->start, r->end - r->start + 1);
+	sp->membase = ioremap(r->start, resource_size(r));
 	if (!sp->membase) {
 		ret = -ENXIO;
 		goto err1;
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index 19f7562..dfa024b 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -375,12 +375,10 @@ static int __init txx9spi_probe(struct platform_device *dev)
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res)
 		goto exit_busy;
-	if (!devm_request_mem_region(&dev->dev,
-				     res->start, res->end - res->start + 1,
+	if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res),
 				     "spi_txx9"))
 		goto exit_busy;
-	c->membase = devm_ioremap(&dev->dev,
-				  res->start, res->end - res->start + 1);
+	c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res));
 	if (!c->membase)
 		goto exit_busy;
 
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 9c446e6..ea1bec3 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -53,7 +53,7 @@
 #define SPIDEV_MAJOR			153	/* assigned */
 #define N_SPI_MINORS			32	/* ... up to 256 */
 
-static unsigned long	minors[N_SPI_MINORS / BITS_PER_LONG];
+static DECLARE_BITMAP(minors, N_SPI_MINORS);
 
 
 /* Bit masks for spi_device.mode management.  Note that incorrect
@@ -558,7 +558,7 @@ static struct class *spidev_class;
 
 /*-------------------------------------------------------------------------*/
 
-static int spidev_probe(struct spi_device *spi)
+static int __devinit spidev_probe(struct spi_device *spi)
 {
 	struct spidev_data	*spidev;
 	int			status;
@@ -607,7 +607,7 @@ static int spidev_probe(struct spi_device *spi)
 	return status;
 }
 
-static int spidev_remove(struct spi_device *spi)
+static int __devexit spidev_remove(struct spi_device *spi)
 {
 	struct spidev_data	*spidev = spi_get_drvdata(spi);
 
@@ -629,7 +629,7 @@ static int spidev_remove(struct spi_device *spi)
 	return 0;
 }
 
-static struct spi_driver spidev_spi = {
+static struct spi_driver spidev_spi_driver = {
 	.driver = {
 		.name =		"spidev",
 		.owner =	THIS_MODULE,
@@ -661,14 +661,14 @@ static int __init spidev_init(void)
 
 	spidev_class = class_create(THIS_MODULE, "spidev");
 	if (IS_ERR(spidev_class)) {
-		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+		unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
 		return PTR_ERR(spidev_class);
 	}
 
-	status = spi_register_driver(&spidev_spi);
+	status = spi_register_driver(&spidev_spi_driver);
 	if (status < 0) {
 		class_destroy(spidev_class);
-		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+		unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
 	}
 	return status;
 }
@@ -676,9 +676,9 @@ module_init(spidev_init);
 
 static void __exit spidev_exit(void)
 {
-	spi_unregister_driver(&spidev_spi);
+	spi_unregister_driver(&spidev_spi_driver);
 	class_destroy(spidev_class);
-	unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+	unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
 }
 module_exit(spidev_exit);
 
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
new file mode 100644
index 0000000..51b3e77
--- /dev/null
+++ b/include/linux/spi/dw_spi.h
@@ -0,0 +1,212 @@
+#ifndef DW_SPI_HEADER_H
+#define DW_SPI_HEADER_H
+#include <linux/io.h>
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET			0
+
+#define SPI_FRF_OFFSET			4
+#define SPI_FRF_SPI			0x0
+#define SPI_FRF_SSP			0x1
+#define SPI_FRF_MICROWIRE		0x2
+#define SPI_FRF_RESV			0x3
+
+#define SPI_MODE_OFFSET			6
+#define SPI_SCPH_OFFSET			6
+#define SPI_SCOL_OFFSET			7
+#define SPI_TMOD_OFFSET			8
+#define	SPI_TMOD_TR			0x0		/* xmit & recv */
+#define SPI_TMOD_TO			0x1		/* xmit only */
+#define SPI_TMOD_RO			0x2		/* recv only */
+#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET		10
+#define SPI_SRL_OFFSET			11
+#define SPI_CFS_OFFSET			12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK				0x7f		/* cover 7 bits */
+#define SR_BUSY				(1 << 0)
+#define SR_TF_NOT_FULL			(1 << 1)
+#define SR_TF_EMPT			(1 << 2)
+#define SR_RF_NOT_EMPT			(1 << 3)
+#define SR_RF_FULL			(1 << 4)
+#define SR_TX_ERR			(1 << 5)
+#define SR_DCOL				(1 << 6)
+
+/* Bit fields in ISR, IMR, RISR, 7 bits */
+#define SPI_INT_TXEI			(1 << 0)
+#define SPI_INT_TXOI			(1 << 1)
+#define SPI_INT_RXUI			(1 << 2)
+#define SPI_INT_RXOI			(1 << 3)
+#define SPI_INT_RXFI			(1 << 4)
+#define SPI_INT_MSTI			(1 << 5)
+
+/* TX RX interrupt level threshhold, max can be 256 */
+#define SPI_INT_THRESHOLD		32
+
+enum dw_ssi_type {
+	SSI_MOTO_SPI = 0,
+	SSI_TI_SSP,
+	SSI_NS_MICROWIRE,
+};
+
+struct dw_spi_reg {
+	u32	ctrl0;
+	u32	ctrl1;
+	u32	ssienr;
+	u32	mwcr;
+	u32	ser;
+	u32	baudr;
+	u32	txfltr;
+	u32	rxfltr;
+	u32	txflr;
+	u32	rxflr;
+	u32	sr;
+	u32	imr;
+	u32	isr;
+	u32	risr;
+	u32	txoicr;
+	u32	rxoicr;
+	u32	rxuicr;
+	u32	msticr;
+	u32	icr;
+	u32	dmacr;
+	u32	dmatdlr;
+	u32	dmardlr;
+	u32	idr;
+	u32	version;
+	u32	dr;		/* Currently oper as 32 bits,
+				though only low 16 bits matters */
+} __packed;
+
+struct dw_spi {
+	struct spi_master	*master;
+	struct spi_device	*cur_dev;
+	struct device		*parent_dev;
+	enum dw_ssi_type	type;
+
+	void __iomem		*regs;
+	unsigned long		paddr;
+	u32			iolen;
+	int			irq;
+	u32			max_freq;	/* max bus freq supported */
+
+	u16			bus_num;
+	u16			num_cs;		/* supported slave numbers */
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct	pump_messages;
+	spinlock_t		lock;
+	struct list_head	queue;
+	int			busy;
+	int			run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct	pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message	*cur_msg;
+	struct spi_transfer	*cur_transfer;
+	struct chip_data	*cur_chip;
+	struct chip_data	*prev_chip;
+	size_t			len;
+	void			*tx;
+	void			*tx_end;
+	void			*rx;
+	void			*rx_end;
+	int			dma_mapped;
+	dma_addr_t		rx_dma;
+	dma_addr_t		tx_dma;
+	size_t			rx_map_len;
+	size_t			tx_map_len;
+	u8			n_bytes;	/* current is a 1/2 bytes op */
+	u8			max_bits_per_word;	/* maxim is 16b */
+	u32			dma_width;
+	int			cs_change;
+	int			(*write)(struct dw_spi *dws);
+	int			(*read)(struct dw_spi *dws);
+	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
+	void			(*cs_control)(u32 command);
+
+	/* Dma info */
+	int			dma_inited;
+	struct dma_chan		*txchan;
+	struct dma_chan		*rxchan;
+	int			txdma_done;
+	int			rxdma_done;
+	u64			tx_param;
+	u64			rx_param;
+	struct device		*dma_dev;
+	dma_addr_t		dma_addr;
+
+	/* Bus interface info */
+	void			*priv;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs;
+#endif
+};
+
+#define dw_readl(dw, name) \
+	__raw_readl(&(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_writel(dw, name, val) \
+	__raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_readw(dw, name) \
+	__raw_readw(&(((struct dw_spi_reg *)dw->regs)->name))
+#define dw_writew(dw, name, val) \
+	__raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name))
+
+static inline void spi_enable_chip(struct dw_spi *dws, int enable)
+{
+	dw_writel(dws, ssienr, (enable ? 1 : 0));
+}
+
+static inline void spi_set_clk(struct dw_spi *dws, u16 div)
+{
+	dw_writel(dws, baudr, div);
+}
+
+static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
+{
+	if (cs > dws->num_cs)
+		return;
+	dw_writel(dws, ser, 1 << cs);
+}
+
+/* Disable IRQ bits */
+static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
+{
+	u32 new_mask;
+
+	new_mask = dw_readl(dws, imr) & ~mask;
+	dw_writel(dws, imr, new_mask);
+}
+
+/* Enable IRQ bits */
+static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
+{
+	u32 new_mask;
+
+	new_mask = dw_readl(dws, imr) | mask;
+	dw_writel(dws, imr, new_mask);
+}
+
+/*
+ * Each SPI slave device to work with dw_api controller should
+ * has such a structure claiming its working mode (PIO/DMA etc),
+ * which can be save in the "controller_data" member of the
+ * struct spi_device
+ */
+struct dw_spi_chip {
+	u8 poll_mode;	/* 0 for contoller polling mode */
+	u8 type;	/* SPI/SSP/Micrwire */
+	u8 enable_dma;
+	void (*cs_control)(u32 command);
+};
+
+extern int dw_spi_add_host(struct dw_spi *dws);
+extern void dw_spi_remove_host(struct dw_spi *dws);
+extern int dw_spi_suspend_host(struct dw_spi *dws);
+extern int dw_spi_resume_host(struct dw_spi *dws);
+#endif /* DW_SPI_HEADER_H */