diff options
author | Felipe Balbi <felipe.balbi@linux.intel.com> | 2016-02-04 14:18:01 +0200 |
---|---|---|
committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2016-04-14 09:24:37 +0300 |
commit | bc5081617faeb3b2f0c126dc37264b87af7da47f (patch) | |
tree | 306b525df6b367ab113b47589592545be6c19d32 | |
parent | bf16200689118d19de1b8d2a3c314fc21f5dc7bb (diff) | |
download | op-kernel-dev-bc5081617faeb3b2f0c126dc37264b87af7da47f.zip op-kernel-dev-bc5081617faeb3b2f0c126dc37264b87af7da47f.tar.gz |
usb: dwc3: drop FIFO resizing logic
That FIFO resizing logic was added to support OMAP5
ES1.0 which had a bogus default FIFO size. I can't
remember the exact size of default FIFO, but it was
less than one bulk superspeed packet (<1024) which
would prevent USB3 from ever working on OMAP5 ES1.0.
However, OMAP5 ES1.0 support has been dropped by
commit aa2f4b16f830 ("ARM: OMAP5: id: Remove ES1.0
support") which renders FIFO resizing unnecessary.
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-rw-r--r-- | Documentation/devicetree/bindings/usb/dwc3.txt | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 1 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.c | 4 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 5 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 9 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 86 | ||||
-rw-r--r-- | drivers/usb/dwc3/platform_data.h | 1 |
7 files changed, 2 insertions, 108 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index fb2ad0a..1569568 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -14,7 +14,6 @@ Optional properties: the second element is expected to be a handle to the USB3/SS PHY - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - - tx-fifo-resize: determines if the FIFO *has* to be reallocated. - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. @@ -47,6 +46,8 @@ Optional properties: register for post-silicon frame length adjustment when the fladj_30mhz_sdbnd signal is invalid or incorrect. + - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. + This is usually a subnode to DWC3 glue to which it is connected. dwc3@4a030000 { @@ -54,5 +55,4 @@ dwc3@4a030000 { reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; - tx-fifo-resize; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index ca164e7..39acb08 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -59,7 +59,6 @@ Example device nodes: interrupts = <0 205 0x4>; phys = <&hs_phy>, <&ss_phy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; dr_mode = "host"; }; }; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index fa20f5a9..67d183a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -882,9 +882,6 @@ static int dwc3_probe(struct platform_device *pdev) dwc->usb3_lpm_capable = device_property_read_bool(dev, "snps,usb3_lpm_capable"); - dwc->needs_fifo_resize = device_property_read_bool(dev, - "tx-fifo-resize"); - dwc->disable_scramble_quirk = device_property_read_bool(dev, "snps,disable_scramble_quirk"); dwc->u2exit_lfps_quirk = device_property_read_bool(dev, @@ -926,7 +923,6 @@ static int dwc3_probe(struct platform_device *pdev) if (pdata->hird_threshold) hird_threshold = pdata->hird_threshold; - dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->usb3_lpm_capable = pdata->usb3_lpm_capable; dwc->dr_mode = pdata->dr_mode; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6254b2f..7cbe9e9 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -709,9 +709,7 @@ struct dwc3_scratchpad_array { * 0 - utmi_sleep_n * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board - * @needs_fifo_resize: not all users might want fifo resizing, flag it * @pullups_connected: true when Run/Stop bit is set - * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup @@ -855,9 +853,7 @@ struct dwc3 { unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; - unsigned needs_fifo_resize:1; unsigned pullups_connected:1; - unsigned resize_fifos:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; unsigned usb3_lpm_capable:1; @@ -1025,7 +1021,6 @@ struct dwc3_gadget_ep_cmd_params { /* prototypes */ void dwc3_set_mode(struct dwc3 *dwc, u32 mode); -int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); /* check whether we are on the DWC_usb31 core */ static inline bool dwc3_is_usb31(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index eca2e6d..4454de0 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -586,9 +586,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); - - dwc->resize_fifos = true; - dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET"); } break; @@ -1027,12 +1024,6 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) { - if (dwc->resize_fifos) { - dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs"); - dwc3_gadget_resize_tx_fifos(dwc); - dwc->resize_fifos = 0; - } - WARN_ON(dwc3_ep0_start_control_status(dep)); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d54a028..3a5c271 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -145,92 +145,6 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) return -ETIMEDOUT; } -/** - * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case - * @dwc: pointer to our context structure - * - * This function will a best effort FIFO allocation in order - * to improve FIFO usage and throughput, while still allowing - * us to enable as many endpoints as possible. - * - * Keep in mind that this operation will be highly dependent - * on the configured size for RAM1 - which contains TxFifo -, - * the amount of endpoints enabled on coreConsultant tool, and - * the width of the Master Bus. - * - * In the ideal world, we would always be able to satisfy the - * following equation: - * - * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \ - * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes - * - * Unfortunately, due to many variables that's not always the case. - */ -int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc) -{ - int last_fifo_depth = 0; - int ram1_depth; - int fifo_size; - int mdwidth; - int num; - - if (!dwc->needs_fifo_resize) - return 0; - - ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); - mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); - - /* MDWIDTH is represented in bits, we need it in bytes */ - mdwidth >>= 3; - - /* - * FIXME For now we will only allocate 1 wMaxPacketSize space - * for each enabled endpoint, later patches will come to - * improve this algorithm so that we better use the internal - * FIFO space - */ - for (num = 0; num < dwc->num_in_eps; num++) { - /* bit0 indicates direction; 1 means IN ep */ - struct dwc3_ep *dep = dwc->eps[(num << 1) | 1]; - int mult = 1; - int tmp; - - if (!(dep->flags & DWC3_EP_ENABLED)) - continue; - - if (usb_endpoint_xfer_bulk(dep->endpoint.desc) - || usb_endpoint_xfer_isoc(dep->endpoint.desc)) - mult = 3; - - /* - * REVISIT: the following assumes we will always have enough - * space available on the FIFO RAM for all possible use cases. - * Make sure that's true somehow and change FIFO allocation - * accordingly. - * - * If we have Bulk or Isochronous endpoints, we want - * them to be able to be very, very fast. So we're giving - * those endpoints a fifo_size which is enough for 3 full - * packets - */ - tmp = mult * (dep->endpoint.maxpacket + mdwidth); - tmp += mdwidth; - - fifo_size = DIV_ROUND_UP(tmp, mdwidth); - - fifo_size |= (last_fifo_depth << 16); - - dwc3_trace(trace_dwc3_gadget, "%s: Fifo Addr %04x Size %d", - dep->name, last_fifo_depth, fifo_size & 0xffff); - - dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size); - - last_fifo_depth += (fifo_size & 0xffff); - } - - return 0; -} - void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index 2bb4d3a..aaa6f00 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -23,7 +23,6 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; - bool tx_fifo_resize; bool usb3_lpm_capable; unsigned is_utmi_l1_suspend:1; |