diff options
author | Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-01-31 12:11:54 +0100 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-04-27 08:20:21 +0200 |
commit | b2547166a69a2878d4e152a5b2143507db8bd381 (patch) | |
tree | d7b4eed24a6b18ba8a3f92a9a688bd8e6fbcffb9 | |
parent | c999303bfc26644b0ab66b3f905ff46b4c76a82d (diff) | |
download | op-kernel-dev-b2547166a69a2878d4e152a5b2143507db8bd381.zip op-kernel-dev-b2547166a69a2878d4e152a5b2143507db8bd381.tar.gz |
ARM: sun5i: a13: olinuxino: Convert to DT label based syntax
In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-rw-r--r-- | arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 236 |
1 files changed, 117 insertions, 119 deletions
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 6b24876..d09c57b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -63,141 +63,139 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + power { + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; - power { - gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; |