summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2012-10-17 17:41:08 +0900
committerKukjin Kim <kgene.kim@samsung.com>2012-10-17 17:41:08 +0900
commitb23bc66c394844ec6e64b3df070573db2cf898e8 (patch)
treee7a3376d92e1d3b4fe29b533b60f9682081f9ead
parent64aecb4a14f084f4c74cc1a0e0a3d223232e630a (diff)
downloadop-kernel-dev-b23bc66c394844ec6e64b3df070573db2cf898e8.zip
op-kernel-dev-b23bc66c394844ec6e64b3df070573db2cf898e8.tar.gz
ARM: S3C64XX: Handle new Amrut modules on Cragganmore
These use a different GPIO for the jack polarity selection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410-module.c35
1 files changed, 32 insertions, 3 deletions
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 15e0c13..a6c156d 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -187,12 +187,13 @@ static struct regulator_init_data wm8994_ldo2 = {
static struct wm8994_pdata wm8994_pdata = {
.gpio_base = CODEC_GPIO_BASE,
+ .micb2_delay = 150,
.gpio_defaults = {
0x3, /* IRQ out, active high, CMOS */
},
.ldo = {
- { .init_data = &wm8994_ldo1, },
- { .init_data = &wm8994_ldo2, },
+ { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
+ { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
},
};
@@ -203,7 +204,7 @@ static const struct i2c_board_info wm1277_devs[] = {
},
};
-static struct arizona_pdata wm5102_pdata = {
+static struct arizona_pdata wm5102_reva_pdata = {
.ldoena = S3C64XX_GPN(7),
.gpio_base = CODEC_GPIO_BASE,
.irq_active_high = true,
@@ -218,6 +219,31 @@ static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
.line = S3C64XX_GPN(5),
};
+static struct spi_board_info wm5102_reva_spi_devs[] = {
+ [0] = {
+ .modalias = "wm5102",
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE +
+ WM831X_IRQ_GPIO_2,
+ .controller_data = &wm5102_spi_csinfo,
+ .platform_data = &wm5102_reva_pdata,
+ },
+};
+
+static struct arizona_pdata wm5102_pdata = {
+ .ldoena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .irq_active_high = true,
+ .micd_pol_gpio = CODEC_GPIO_BASE + 2,
+ .gpio_defaults = {
+ [2] = 0x10000, /* AIF3TXLRCLK */
+ [3] = 0x4, /* OPCLK */
+ },
+};
+
static struct spi_board_info wm5102_spi_devs[] = {
[0] = {
.modalias = "wm5102",
@@ -278,6 +304,9 @@ static __devinitdata const struct {
{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+ { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
+ .spi_devs = wm5102_reva_spi_devs,
+ .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) },
{ .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
.spi_devs = wm5102_spi_devs,
.num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
OpenPOWER on IntegriCloud