diff options
author | Arend van Spriel <arend@broadcom.com> | 2011-06-29 16:46:37 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-07-05 09:57:10 -0700 |
commit | aef6829a9086b16bd73d02c0df2b556eecb4f5d4 (patch) | |
tree | 2142f4ec8c4b23d40eb5425432130f018efa1414 | |
parent | db3cbaa469a21078db8c16f5f10a95643df0e8a2 (diff) | |
download | op-kernel-dev-aef6829a9086b16bd73d02c0df2b556eecb4f5d4.zip op-kernel-dev-aef6829a9086b16bd73d02c0df2b556eecb4f5d4.tar.gz |
staging: brcm80211: remove code from pmu.c related to unsupported chipsets
The pmu source file contains several code fragments for chipsets that
are not supported by this driver. These have been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r-- | drivers/staging/brcm80211/brcmsmac/pmu.c | 1424 | ||||
-rw-r--r-- | drivers/staging/brcm80211/brcmsmac/pmu.h | 3 |
2 files changed, 0 insertions, 1427 deletions
diff --git a/drivers/staging/brcm80211/brcmsmac/pmu.c b/drivers/staging/brcm80211/brcmsmac/pmu.c index 0b7ab82..d7ca7ed 100644 --- a/drivers/staging/brcm80211/brcmsmac/pmu.c +++ b/drivers/staging/brcm80211/brcmsmac/pmu.c @@ -596,432 +596,11 @@ /* PMU resource up transition time in ILP cycles */ #define PMURES_UP_TRANSITION 2 -/* Setup resource up/down timers */ -typedef struct { - u8 resnum; - u16 updown; -} pmu_res_updown_t; - -/* Change resource dependancies masks */ -typedef struct { - u32 res_mask; /* resources (chip specific) */ - s8 action; /* action */ - u32 depend_mask; /* changes to the dependancies mask */ - /* action is taken when filter is NULL or return true: */ - bool(*filter) (struct si_pub *sih); -} pmu_res_depend_t; - -/* setup pll and query clock speed */ -typedef struct { - u16 fref; - u8 xf; - u8 p1div; - u8 p2div; - u8 ndiv_int; - u32 ndiv_frac; -} pmu1_xtaltab0_t; - -/* - * prototypes used in resource tables - */ -static bool si_pmu_res_depfltr_bb(struct si_pub *sih); -static bool si_pmu_res_depfltr_ncb(struct si_pub *sih); -static bool si_pmu_res_depfltr_paldo(struct si_pub *sih); -static bool si_pmu_res_depfltr_npaldo(struct si_pub *sih); - -static const pmu_res_updown_t bcm4328a0_res_updown[] = { - { - RES4328_EXT_SWITCHER_PWM, 0x0101}, { - RES4328_BB_SWITCHER_PWM, 0x1f01}, { - RES4328_BB_SWITCHER_BURST, 0x010f}, { - RES4328_BB_EXT_SWITCHER_BURST, 0x0101}, { - RES4328_ILP_REQUEST, 0x0202}, { - RES4328_RADIO_SWITCHER_PWM, 0x0f01}, { - RES4328_RADIO_SWITCHER_BURST, 0x0f01}, { - RES4328_ROM_SWITCH, 0x0101}, { - RES4328_PA_REF_LDO, 0x0f01}, { - RES4328_RADIO_LDO, 0x0f01}, { - RES4328_AFE_LDO, 0x0f01}, { - RES4328_PLL_LDO, 0x0f01}, { - RES4328_BG_FILTBYP, 0x0101}, { - RES4328_TX_FILTBYP, 0x0101}, { - RES4328_RX_FILTBYP, 0x0101}, { - RES4328_XTAL_PU, 0x0101}, { - RES4328_XTAL_EN, 0xa001}, { - RES4328_BB_PLL_FILTBYP, 0x0101}, { - RES4328_RF_PLL_FILTBYP, 0x0101}, { - RES4328_BB_PLL_PU, 0x0701} -}; - -static const pmu_res_depend_t bcm4328a0_res_depend[] = { - /* Adjust ILP request resource not to force ext/BB switchers into burst mode */ - { - PMURES_BIT(RES4328_ILP_REQUEST), - RES_DEPEND_SET, - PMURES_BIT(RES4328_EXT_SWITCHER_PWM) | - PMURES_BIT(RES4328_BB_SWITCHER_PWM), NULL} -}; - -static const pmu_res_updown_t bcm4325a0_res_updown_qt[] = { - { - RES4325_HT_AVAIL, 0x0300}, { - RES4325_BBPLL_PWRSW_PU, 0x0101}, { - RES4325_RFPLL_PWRSW_PU, 0x0101}, { - RES4325_ALP_AVAIL, 0x0100}, { - RES4325_XTAL_PU, 0x1000}, { - RES4325_LNLDO1_PU, 0x0800}, { - RES4325_CLDO_CBUCK_PWM, 0x0101}, { - RES4325_CBUCK_PWM, 0x0803} -}; - -static const pmu_res_updown_t bcm4325a0_res_updown[] = { - { - RES4325_XTAL_PU, 0x1501} -}; - -static const pmu_res_depend_t bcm4325a0_res_depend[] = { - /* Adjust OTP PU resource dependencies - remove BB BURST */ - { - PMURES_BIT(RES4325_OTP_PU), - RES_DEPEND_REMOVE, - PMURES_BIT(RES4325_BUCK_BOOST_BURST), NULL}, - /* Adjust ALP/HT Avail resource dependencies - bring up BB along if it is used. */ - { - PMURES_BIT(RES4325_ALP_AVAIL) | PMURES_BIT(RES4325_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4325_BUCK_BOOST_BURST) | - PMURES_BIT(RES4325_BUCK_BOOST_PWM), si_pmu_res_depfltr_bb}, - /* Adjust HT Avail resource dependencies - bring up RF switches along with HT. */ - { - PMURES_BIT(RES4325_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4325_RX_PWRSW_PU) | - PMURES_BIT(RES4325_TX_PWRSW_PU) | - PMURES_BIT(RES4325_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4325_AFE_PWRSW_PU), NULL}, - /* Adjust ALL resource dependencies - remove CBUCK dependancies if it is not used. */ - { - PMURES_BIT(RES4325_ILP_REQUEST) | - PMURES_BIT(RES4325_ABUCK_BURST) | - PMURES_BIT(RES4325_ABUCK_PWM) | - PMURES_BIT(RES4325_LNLDO1_PU) | - PMURES_BIT(RES4325C1_LNLDO2_PU) | - PMURES_BIT(RES4325_XTAL_PU) | - PMURES_BIT(RES4325_ALP_AVAIL) | - PMURES_BIT(RES4325_RX_PWRSW_PU) | - PMURES_BIT(RES4325_TX_PWRSW_PU) | - PMURES_BIT(RES4325_RFPLL_PWRSW_PU) | - PMURES_BIT(RES4325_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4325_AFE_PWRSW_PU) | - PMURES_BIT(RES4325_BBPLL_PWRSW_PU) | - PMURES_BIT(RES4325_HT_AVAIL), RES_DEPEND_REMOVE, - PMURES_BIT(RES4325B0_CBUCK_LPOM) | - PMURES_BIT(RES4325B0_CBUCK_BURST) | - PMURES_BIT(RES4325B0_CBUCK_PWM), si_pmu_res_depfltr_ncb} -}; - -static const pmu_res_updown_t bcm4315a0_res_updown_qt[] = { - { - RES4315_HT_AVAIL, 0x0101}, { - RES4315_XTAL_PU, 0x0100}, { - RES4315_LNLDO1_PU, 0x0100}, { - RES4315_PALDO_PU, 0x0100}, { - RES4315_CLDO_PU, 0x0100}, { - RES4315_CBUCK_PWM, 0x0100}, { - RES4315_CBUCK_BURST, 0x0100}, { - RES4315_CBUCK_LPOM, 0x0100} -}; - -static const pmu_res_updown_t bcm4315a0_res_updown[] = { - { - RES4315_XTAL_PU, 0x2501} -}; - -static const pmu_res_depend_t bcm4315a0_res_depend[] = { - /* Adjust OTP PU resource dependencies - not need PALDO unless write */ - { - PMURES_BIT(RES4315_OTP_PU), - RES_DEPEND_REMOVE, - PMURES_BIT(RES4315_PALDO_PU), si_pmu_res_depfltr_npaldo}, - /* Adjust ALP/HT Avail resource dependencies - bring up PALDO along if it is used. */ - { - PMURES_BIT(RES4315_ALP_AVAIL) | PMURES_BIT(RES4315_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4315_PALDO_PU), si_pmu_res_depfltr_paldo}, - /* Adjust HT Avail resource dependencies - bring up RF switches along with HT. */ - { - PMURES_BIT(RES4315_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4315_RX_PWRSW_PU) | - PMURES_BIT(RES4315_TX_PWRSW_PU) | - PMURES_BIT(RES4315_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4315_AFE_PWRSW_PU), NULL}, - /* Adjust ALL resource dependencies - remove CBUCK dependancies if it is not used. */ - { - PMURES_BIT(RES4315_CLDO_PU) | PMURES_BIT(RES4315_ILP_REQUEST) | - PMURES_BIT(RES4315_LNLDO1_PU) | - PMURES_BIT(RES4315_OTP_PU) | - PMURES_BIT(RES4315_LNLDO2_PU) | - PMURES_BIT(RES4315_XTAL_PU) | - PMURES_BIT(RES4315_ALP_AVAIL) | - PMURES_BIT(RES4315_RX_PWRSW_PU) | - PMURES_BIT(RES4315_TX_PWRSW_PU) | - PMURES_BIT(RES4315_RFPLL_PWRSW_PU) | - PMURES_BIT(RES4315_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4315_AFE_PWRSW_PU) | - PMURES_BIT(RES4315_BBPLL_PWRSW_PU) | - PMURES_BIT(RES4315_HT_AVAIL), RES_DEPEND_REMOVE, - PMURES_BIT(RES4315_CBUCK_LPOM) | - PMURES_BIT(RES4315_CBUCK_BURST) | - PMURES_BIT(RES4315_CBUCK_PWM), si_pmu_res_depfltr_ncb} -}; - - /* 4329 specific. needs to come back this issue later */ -static const pmu_res_updown_t bcm4329_res_updown[] = { - { - RES4329_XTAL_PU, 0x1501} -}; - -static const pmu_res_depend_t bcm4329_res_depend[] = { - /* Adjust HT Avail resource dependencies */ - { - PMURES_BIT(RES4329_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4329_CBUCK_LPOM) | - PMURES_BIT(RES4329_CBUCK_BURST) | - PMURES_BIT(RES4329_CBUCK_PWM) | - PMURES_BIT(RES4329_CLDO_PU) | - PMURES_BIT(RES4329_PALDO_PU) | - PMURES_BIT(RES4329_LNLDO1_PU) | - PMURES_BIT(RES4329_XTAL_PU) | - PMURES_BIT(RES4329_ALP_AVAIL) | - PMURES_BIT(RES4329_RX_PWRSW_PU) | - PMURES_BIT(RES4329_TX_PWRSW_PU) | - PMURES_BIT(RES4329_RFPLL_PWRSW_PU) | - PMURES_BIT(RES4329_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4329_AFE_PWRSW_PU) | - PMURES_BIT(RES4329_BBPLL_PWRSW_PU), NULL} -}; - -static const pmu_res_updown_t bcm4319a0_res_updown_qt[] = { - { - RES4319_HT_AVAIL, 0x0101}, { - RES4319_XTAL_PU, 0x0100}, { - RES4319_LNLDO1_PU, 0x0100}, { - RES4319_PALDO_PU, 0x0100}, { - RES4319_CLDO_PU, 0x0100}, { - RES4319_CBUCK_PWM, 0x0100}, { - RES4319_CBUCK_BURST, 0x0100}, { - RES4319_CBUCK_LPOM, 0x0100} -}; - -static const pmu_res_updown_t bcm4319a0_res_updown[] = { - { - RES4319_XTAL_PU, 0x3f01} -}; - -static const pmu_res_depend_t bcm4319a0_res_depend[] = { - /* Adjust OTP PU resource dependencies - not need PALDO unless write */ - { - PMURES_BIT(RES4319_OTP_PU), - RES_DEPEND_REMOVE, - PMURES_BIT(RES4319_PALDO_PU), si_pmu_res_depfltr_npaldo}, - /* Adjust HT Avail resource dependencies - bring up PALDO along if it is used. */ - { - PMURES_BIT(RES4319_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4319_PALDO_PU), si_pmu_res_depfltr_paldo}, - /* Adjust HT Avail resource dependencies - bring up RF switches along with HT. */ - { - PMURES_BIT(RES4319_HT_AVAIL), - RES_DEPEND_ADD, - PMURES_BIT(RES4319_RX_PWRSW_PU) | - PMURES_BIT(RES4319_TX_PWRSW_PU) | - PMURES_BIT(RES4319_RFPLL_PWRSW_PU) | - PMURES_BIT(RES4319_LOGEN_PWRSW_PU) | - PMURES_BIT(RES4319_AFE_PWRSW_PU), NULL} -}; - -static const pmu_res_updown_t bcm4336a0_res_updown_qt[] = { - { - RES4336_HT_AVAIL, 0x0101}, { - RES4336_XTAL_PU, 0x0100}, { - RES4336_CLDO_PU, 0x0100}, { - RES4336_CBUCK_PWM, 0x0100}, { - RES4336_CBUCK_BURST, 0x0100}, { - RES4336_CBUCK_LPOM, 0x0100} -}; - -static const pmu_res_updown_t bcm4336a0_res_updown[] = { - { - RES4336_HT_AVAIL, 0x0D01} -}; - -static const pmu_res_depend_t bcm4336a0_res_depend[] = { - /* Just a dummy entry for now */ - { - PMURES_BIT(RES4336_RSVD), RES_DEPEND_ADD, 0, NULL} -}; - -static const pmu_res_updown_t bcm4330a0_res_updown_qt[] = { - { - RES4330_HT_AVAIL, 0x0101}, { - RES4330_XTAL_PU, 0x0100}, { - RES4330_CLDO_PU, 0x0100}, { - RES4330_CBUCK_PWM, 0x0100}, { - RES4330_CBUCK_BURST, 0x0100}, { - RES4330_CBUCK_LPOM, 0x0100} -}; - -static const pmu_res_updown_t bcm4330a0_res_updown[] = { - { - RES4330_HT_AVAIL, 0x0e02} -}; - -static const pmu_res_depend_t bcm4330a0_res_depend[] = { - /* Just a dummy entry for now */ - { - PMURES_BIT(RES4330_HT_AVAIL), RES_DEPEND_ADD, 0, NULL} -}; - -/* the following table is based on 1440Mhz fvco */ -static const pmu1_xtaltab0_t pmu1_xtaltab0_1440[] = { - { - 12000, 1, 1, 1, 0x78, 0x0}, { - 13000, 2, 1, 1, 0x6E, 0xC4EC4E}, { - 14400, 3, 1, 1, 0x64, 0x0}, { - 15360, 4, 1, 1, 0x5D, 0xC00000}, { - 16200, 5, 1, 1, 0x58, 0xE38E38}, { - 16800, 6, 1, 1, 0x55, 0xB6DB6D}, { - 19200, 7, 1, 1, 0x4B, 0}, { - 19800, 8, 1, 1, 0x48, 0xBA2E8B}, { - 20000, 9, 1, 1, 0x48, 0x0}, { - 25000, 10, 1, 1, 0x39, 0x999999}, { - 26000, 11, 1, 1, 0x37, 0x627627}, { - 30000, 12, 1, 1, 0x30, 0x0}, { - 37400, 13, 2, 1, 0x4D, 0x15E76}, { - 38400, 13, 2, 1, 0x4B, 0x0}, { - 40000, 14, 2, 1, 0x48, 0x0}, { - 48000, 15, 2, 1, 0x3c, 0x0}, { - 0, 0, 0, 0, 0, 0} -}; - -static const pmu1_xtaltab0_t pmu1_xtaltab0_960[] = { - { - 12000, 1, 1, 1, 0x50, 0x0}, { - 13000, 2, 1, 1, 0x49, 0xD89D89}, { - 14400, 3, 1, 1, 0x42, 0xAAAAAA}, { - 15360, 4, 1, 1, 0x3E, 0x800000}, { - 16200, 5, 1, 1, 0x39, 0x425ED0}, { - 16800, 6, 1, 1, 0x39, 0x249249}, { - 19200, 7, 1, 1, 0x32, 0x0}, { - 19800, 8, 1, 1, 0x30, 0x7C1F07}, { - 20000, 9, 1, 1, 0x30, 0x0}, { - 25000, 10, 1, 1, 0x26, 0x666666}, { - 26000, 11, 1, 1, 0x24, 0xEC4EC4}, { - 30000, 12, 1, 1, 0x20, 0x0}, { - 37400, 13, 2, 1, 0x33, 0x563EF9}, { - 38400, 14, 2, 1, 0x32, 0x0}, { - 40000, 15, 2, 1, 0x30, 0x0}, { - 48000, 16, 2, 1, 0x28, 0x0}, { - 0, 0, 0, 0, 0, 0} -}; - -static const pmu1_xtaltab0_t pmu1_xtaltab0_880_4329[] = { - { - 12000, 1, 3, 22, 0x9, 0xFFFFEF}, { - 13000, 2, 1, 6, 0xb, 0x483483}, { - 14400, 3, 1, 10, 0xa, 0x1C71C7}, { - 15360, 4, 1, 5, 0xb, 0x755555}, { - 16200, 5, 1, 10, 0x5, 0x6E9E06}, { - 16800, 6, 1, 10, 0x5, 0x3Cf3Cf}, { - 19200, 7, 1, 4, 0xb, 0x755555}, { - 19800, 8, 1, 11, 0x4, 0xA57EB}, { - 20000, 9, 1, 11, 0x4, 0x0}, { - 24000, 10, 3, 11, 0xa, 0x0}, { - 25000, 11, 5, 16, 0xb, 0x0}, { - 26000, 12, 1, 1, 0x21, 0xD89D89}, { - 30000, 13, 3, 8, 0xb, 0x0}, { - 37400, 14, 3, 1, 0x46, 0x969696}, { - 38400, 15, 1, 1, 0x16, 0xEAAAAA}, { - 40000, 16, 1, 2, 0xb, 0}, { - 0, 0, 0, 0, 0, 0} -}; - -/* the following table is based on 880Mhz fvco */ -static const pmu1_xtaltab0_t pmu1_xtaltab0_880[] = { - { - 12000, 1, 3, 22, 0x9, 0xFFFFEF}, { - 13000, 2, 1, 6, 0xb, 0x483483}, { - 14400, 3, 1, 10, 0xa, 0x1C71C7}, { - 15360, 4, 1, 5, 0xb, 0x755555}, { - 16200, 5, 1, 10, 0x5, 0x6E9E06}, { - 16800, 6, 1, 10, 0x5, 0x3Cf3Cf}, { - 19200, 7, 1, 4, 0xb, 0x755555}, { - 19800, 8, 1, 11, 0x4, 0xA57EB}, { - 20000, 9, 1, 11, 0x4, 0x0}, { - 24000, 10, 3, 11, 0xa, 0x0}, { - 25000, 11, 5, 16, 0xb, 0x0}, { - 26000, 12, 1, 2, 0x10, 0xEC4EC4}, { - 30000, 13, 3, 8, 0xb, 0x0}, { - 33600, 14, 1, 2, 0xd, 0x186186}, { - 38400, 15, 1, 2, 0xb, 0x755555}, { - 40000, 16, 1, 2, 0xb, 0}, { - 0, 0, 0, 0, 0, 0} -}; - -/* true if the power topology uses the buck boost to provide 3.3V to VDDIO_RF and WLAN PA */ -static bool si_pmu_res_depfltr_bb(struct si_pub *sih) -{ - return (sih->boardflags & BFL_BUCKBOOST) != 0; -} - -/* true if the power topology doesn't use the cbuck. Key on chiprev also if the chip is BCM4325. */ -static bool si_pmu_res_depfltr_ncb(struct si_pub *sih) -{ - - return (sih->boardflags & BFL_NOCBUCK) != 0; -} - -/* true if the power topology uses the PALDO */ -static bool si_pmu_res_depfltr_paldo(struct si_pub *sih) -{ - return (sih->boardflags & BFL_PALDO) != 0; -} - -/* true if the power topology doesn't use the PALDO */ -static bool si_pmu_res_depfltr_npaldo(struct si_pub *sih) -{ - return (sih->boardflags & BFL_PALDO) == 0; -} - -/* Return dependancies (direct or all/indirect) for the given resources */ -static u32 -si_pmu_res_deps(struct si_pub *sih, chipcregs_t *cc, u32 rsrcs, - bool all) -{ - u32 deps = 0; - u32 i; - - for (i = 0; i <= PMURES_MAX_RESNUM; i++) { - if (!(rsrcs & PMURES_BIT(i))) - continue; - W_REG(&cc->res_table_sel, i); - deps |= R_REG(&cc->res_dep_mask); - } - - return !all ? deps : (deps - ? (deps | - si_pmu_res_deps(sih, cc, deps, - true)) : 0); -} - /* Determine min/max rsrc masks. Value 0 leaves hardware at default. */ static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax) { u32 min_mask = 0, max_mask = 0; uint rsrcs; - char *val; /* # resources */ rsrcs = (sih->pmucaps & PCAP_RC_MASK) >> PCAP_RC_SHIFT; @@ -1030,52 +609,9 @@ static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax) switch (sih->chip) { case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43238_CHIP_ID: - case BCM4331_CHIP_ID: - case BCM6362_CHIP_ID: /* ??? */ break; - case BCM4329_CHIP_ID: - /* 4329 spedific issue. Needs to come back this issue later */ - /* Down to save the power. */ - min_mask = - PMURES_BIT(RES4329_CBUCK_LPOM) | - PMURES_BIT(RES4329_CLDO_PU); - /* Allow (but don't require) PLL to turn on */ - max_mask = 0x3ff63e; - break; - case BCM4319_CHIP_ID: - /* We only need a few resources to be kept on all the time */ - min_mask = PMURES_BIT(RES4319_CBUCK_LPOM) | - PMURES_BIT(RES4319_CLDO_PU); - - /* Allow everything else to be turned on upon requests */ - max_mask = ~(~0 << rsrcs); - break; - case BCM4336_CHIP_ID: - /* Down to save the power. */ - min_mask = - PMURES_BIT(RES4336_CBUCK_LPOM) | PMURES_BIT(RES4336_CLDO_PU) - | PMURES_BIT(RES4336_LDO3P3_PU) | PMURES_BIT(RES4336_OTP_PU) - | PMURES_BIT(RES4336_DIS_INT_RESET_PD); - /* Allow (but don't require) PLL to turn on */ - max_mask = 0x1ffffff; - break; - - case BCM4330_CHIP_ID: - /* Down to save the power. */ - min_mask = - PMURES_BIT(RES4330_CBUCK_LPOM) | PMURES_BIT(RES4330_CLDO_PU) - | PMURES_BIT(RES4330_DIS_INT_RESET_PD) | - PMURES_BIT(RES4330_LDO3P3_PU) | PMURES_BIT(RES4330_OTP_PU); - /* Allow (but don't require) PLL to turn on */ - max_mask = 0xfffffff; - break; - case BCM4313_CHIP_ID: min_mask = PMURES_BIT(RES4313_BB_PU_RSRC) | PMURES_BIT(RES4313_XTAL_PU_RSRC) | @@ -1087,122 +623,18 @@ static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax) break; } - /* Apply nvram override to min mask */ - val = getvar(NULL, "rmin"); - if (val != NULL) { - min_mask = (u32) simple_strtoul(val, NULL, 0); - } - /* Apply nvram override to max mask */ - val = getvar(NULL, "rmax"); - if (val != NULL) { - max_mask = (u32) simple_strtoul(val, NULL, 0); - } - *pmin = min_mask; *pmax = max_mask; } -/* Return up time in ILP cycles for the given resource. */ -static uint -si_pmu_res_uptime(struct si_pub *sih, chipcregs_t *cc, u8 rsrc) { - u32 deps; - uint up, i, dup, dmax; - u32 min_mask = 0, max_mask = 0; - - /* uptime of resource 'rsrc' */ - W_REG(&cc->res_table_sel, rsrc); - up = (R_REG(&cc->res_updn_timer) >> 8) & 0xff; - - /* direct dependancies of resource 'rsrc' */ - deps = si_pmu_res_deps(sih, cc, PMURES_BIT(rsrc), false); - for (i = 0; i <= PMURES_MAX_RESNUM; i++) { - if (!(deps & PMURES_BIT(i))) - continue; - deps &= ~si_pmu_res_deps(sih, cc, PMURES_BIT(i), true); - } - si_pmu_res_masks(sih, &min_mask, &max_mask); - deps &= ~min_mask; - - /* max uptime of direct dependancies */ - dmax = 0; - for (i = 0; i <= PMURES_MAX_RESNUM; i++) { - if (!(deps & PMURES_BIT(i))) - continue; - dup = si_pmu_res_uptime(sih, cc, (u8) i); - if (dmax < dup) - dmax = dup; - } - - return up + dmax + PMURES_UP_TRANSITION; -} - static void si_pmu_spuravoid_pllupdate(struct si_pub *sih, chipcregs_t *cc, u8 spuravoid) { u32 tmp = 0; - u8 phypll_offset = 0; - u8 bcm5357_bcm43236_p1div[] = { 0x1, 0x5, 0x5 }; - u8 bcm5357_bcm43236_ndiv[] = { 0x30, 0xf6, 0xfc }; switch (sih->chip) { - case BCM5357_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43238_CHIP_ID: - - /* - * BCM5357 needs to touch PLL1_PLLCTL[02], - * so offset PLL0_PLLCTL[02] by 6 - */ - phypll_offset = (sih->chip == BCM5357_CHIP_ID) ? 6 : 0; - - /* RMW only the P1 divider */ - W_REG(&cc->pllcontrol_addr, - PMU1_PLL0_PLLCTL0 + phypll_offset); - tmp = R_REG(&cc->pllcontrol_data); - tmp &= (~(PMU1_PLL0_PC0_P1DIV_MASK)); - tmp |= - (bcm5357_bcm43236_p1div[spuravoid] << - PMU1_PLL0_PC0_P1DIV_SHIFT); - W_REG(&cc->pllcontrol_data, tmp); - - /* RMW only the int feedback divider */ - W_REG(&cc->pllcontrol_addr, - PMU1_PLL0_PLLCTL2 + phypll_offset); - tmp = R_REG(&cc->pllcontrol_data); - tmp &= ~(PMU1_PLL0_PC2_NDIV_INT_MASK); - tmp |= - (bcm5357_bcm43236_ndiv[spuravoid]) << - PMU1_PLL0_PC2_NDIV_INT_SHIFT; - W_REG(&cc->pllcontrol_data, tmp); - - tmp = 1 << 10; - break; - - case BCM4331_CHIP_ID: - if (spuravoid == 2) { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11500014); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x0FC00a08); - } else if (spuravoid == 1) { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11500014); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x0F600a08); - } else { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11100014); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x03000a08); - } - tmp = 1 << 10; - break; - case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM6362_CHIP_ID: if (spuravoid == 1) { W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); W_REG(&cc->pllcontrol_data, 0x11500010); @@ -1249,84 +681,6 @@ si_pmu_spuravoid_pllupdate(struct si_pub *sih, chipcregs_t *cc, u8 spuravoid) tmp = 1 << 10; break; - case BCM4716_CHIP_ID: - case BCM4748_CHIP_ID: - case BCM47162_CHIP_ID: - if (spuravoid == 1) { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11500060); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x080C0C06); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x0F600000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - W_REG(&cc->pllcontrol_data, 0x00000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x2001E924); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888815); - } else { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11100060); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x080c0c06); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x03000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - W_REG(&cc->pllcontrol_data, 0x00000000); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x200005c0); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888815); - } - - tmp = 3 << 9; - break; - - case BCM4319_CHIP_ID: - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x11100070); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x1014140a); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888854); - - if (spuravoid == 1) { - /* spur_avoid ON, so enable 41/82/164Mhz clock mode */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x05201828); - } else { - /* enable 40/80/160Mhz clock mode */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x05001828); - } - break; - case BCM4336_CHIP_ID: - /* Looks like these are only for default xtal freq 26MHz */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - W_REG(&cc->pllcontrol_data, 0x02100020); - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - W_REG(&cc->pllcontrol_data, 0x0C0C0C0C); - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - W_REG(&cc->pllcontrol_data, 0x01240C0C); - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - W_REG(&cc->pllcontrol_data, 0x202C2820); - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - W_REG(&cc->pllcontrol_data, 0x88888825); - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - if (spuravoid == 1) - W_REG(&cc->pllcontrol_data, 0x00EC4EC4); - else - W_REG(&cc->pllcontrol_data, 0x00762762); - - tmp = PCTL_PLL_PLLCTL_UPD; - break; - default: /* bail out */ return; @@ -1336,346 +690,6 @@ si_pmu_spuravoid_pllupdate(struct si_pub *sih, chipcregs_t *cc, u8 spuravoid) W_REG(&cc->pmucontrol, tmp); } -/* select default xtal frequency for each chip */ -static const pmu1_xtaltab0_t *si_pmu1_xtaldef0(struct si_pub *sih) -{ - switch (sih->chip) { - case BCM4329_CHIP_ID: - /* Default to 38400Khz */ - return &pmu1_xtaltab0_880_4329[PMU1_XTALTAB0_880_38400K]; - case BCM4319_CHIP_ID: - /* Default to 30000Khz */ - return &pmu1_xtaltab0_1440[PMU1_XTALTAB0_1440_30000K]; - case BCM4336_CHIP_ID: - /* Default to 26000Khz */ - return &pmu1_xtaltab0_960[PMU1_XTALTAB0_960_26000K]; - case BCM4330_CHIP_ID: - /* Default to 37400Khz */ - if (CST4330_CHIPMODE_SDIOD(sih->chipst)) - return &pmu1_xtaltab0_960[PMU1_XTALTAB0_960_37400K]; - else - return &pmu1_xtaltab0_1440[PMU1_XTALTAB0_1440_37400K]; - default: - break; - } - return NULL; -} - -/* select xtal table for each chip */ -static const pmu1_xtaltab0_t *si_pmu1_xtaltab0(struct si_pub *sih) -{ - switch (sih->chip) { - case BCM4329_CHIP_ID: - return pmu1_xtaltab0_880_4329; - case BCM4319_CHIP_ID: - return pmu1_xtaltab0_1440; - case BCM4336_CHIP_ID: - return pmu1_xtaltab0_960; - case BCM4330_CHIP_ID: - if (CST4330_CHIPMODE_SDIOD(sih->chipst)) - return pmu1_xtaltab0_960; - else - return pmu1_xtaltab0_1440; - default: - break; - } - return NULL; -} - -/* query alp/xtal clock frequency */ -static u32 -si_pmu1_alpclk0(struct si_pub *sih, chipcregs_t *cc) -{ - const pmu1_xtaltab0_t *xt; - u32 xf; - - /* Find the frequency in the table */ - xf = (R_REG(&cc->pmucontrol) & PCTL_XTALFREQ_MASK) >> - PCTL_XTALFREQ_SHIFT; - for (xt = si_pmu1_xtaltab0(sih); xt != NULL && xt->fref != 0; xt++) - if (xt->xf == xf) - break; - /* Could not find it so assign a default value */ - if (xt == NULL || xt->fref == 0) - xt = si_pmu1_xtaldef0(sih); - return xt->fref * 1000; -} - -/* select default pll fvco for each chip */ -static u32 si_pmu1_pllfvco0(struct si_pub *sih) -{ - switch (sih->chip) { - case BCM4329_CHIP_ID: - return FVCO_880; - case BCM4319_CHIP_ID: - return FVCO_1440; - case BCM4336_CHIP_ID: - return FVCO_960; - case BCM4330_CHIP_ID: - if (CST4330_CHIPMODE_SDIOD(sih->chipst)) - return FVCO_960; - else - return FVCO_1440; - default: - break; - } - return 0; -} - -static void si_pmu_set_4330_plldivs(struct si_pub *sih) -{ - u32 FVCO = si_pmu1_pllfvco0(sih) / 1000; - u32 m1div, m2div, m3div, m4div, m5div, m6div; - u32 pllc1, pllc2; - - m2div = m3div = m4div = m6div = FVCO / 80; - m5div = FVCO / 160; - - if (CST4330_CHIPMODE_SDIOD(sih->chipst)) - m1div = FVCO / 80; - else - m1div = FVCO / 90; - pllc1 = - (m1div << PMU1_PLL0_PC1_M1DIV_SHIFT) | (m2div << - PMU1_PLL0_PC1_M2DIV_SHIFT) | - (m3div << PMU1_PLL0_PC1_M3DIV_SHIFT) | (m4div << - PMU1_PLL0_PC1_M4DIV_SHIFT); - si_pmu_pllcontrol(sih, PMU1_PLL0_PLLCTL1, ~0, pllc1); - - pllc2 = si_pmu_pllcontrol(sih, PMU1_PLL0_PLLCTL1, 0, 0); - pllc2 &= ~(PMU1_PLL0_PC2_M5DIV_MASK | PMU1_PLL0_PC2_M6DIV_MASK); - pllc2 |= - ((m5div << PMU1_PLL0_PC2_M5DIV_SHIFT) | - (m6div << PMU1_PLL0_PC2_M6DIV_SHIFT)); - si_pmu_pllcontrol(sih, PMU1_PLL0_PLLCTL2, ~0, pllc2); -} - -/* Set up PLL registers in the PMU as per the crystal speed. - * XtalFreq field in pmucontrol register being 0 indicates the PLL - * is not programmed and the h/w default is assumed to work, in which - * case the xtal frequency is unknown to the s/w so we need to call - * si_pmu1_xtaldef0() wherever it is needed to return a default value. - */ -static void si_pmu1_pllinit0(struct si_pub *sih, chipcregs_t *cc, u32 xtal) -{ - const pmu1_xtaltab0_t *xt; - u32 tmp; - u32 buf_strength = 0; - u8 ndiv_mode = 1; - - /* Use h/w default PLL config */ - if (xtal == 0) { - return; - } - - /* Find the frequency in the table */ - for (xt = si_pmu1_xtaltab0(sih); xt != NULL && xt->fref != 0; xt++) - if (xt->fref == xtal) - break; - - /* Check current PLL state, bail out if it has been programmed or - * we don't know how to program it. - */ - if (xt == NULL || xt->fref == 0) { - return; - } - /* for 4319 bootloader already programs the PLL but bootloader does not - * program the PLL4 and PLL5. So Skip this check for 4319 - */ - if ((((R_REG(&cc->pmucontrol) & PCTL_XTALFREQ_MASK) >> - PCTL_XTALFREQ_SHIFT) == xt->xf) && - !((sih->chip == BCM4319_CHIP_ID) - || (sih->chip == BCM4330_CHIP_ID))) - return; - - switch (sih->chip) { - case BCM4329_CHIP_ID: - /* Change the BBPLL drive strength to 8 for all channels */ - buf_strength = 0x888888; - AND_REG(&cc->min_res_mask, - ~(PMURES_BIT(RES4329_BBPLL_PWRSW_PU) | - PMURES_BIT(RES4329_HT_AVAIL))); - AND_REG(&cc->max_res_mask, - ~(PMURES_BIT(RES4329_BBPLL_PWRSW_PU) | - PMURES_BIT(RES4329_HT_AVAIL))); - SPINWAIT(R_REG(&cc->clk_ctl_st) & CCS_HTAVAIL, - PMU_MAX_TRANSITION_DLY); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - if (xt->fref == 38400) - tmp = 0x200024C0; - else if (xt->fref == 37400) - tmp = 0x20004500; - else if (xt->fref == 26000) - tmp = 0x200024C0; - else - tmp = 0x200005C0; /* Chip Dflt Settings */ - W_REG(&cc->pllcontrol_data, tmp); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - tmp = - R_REG(&cc->pllcontrol_data) & PMU1_PLL0_PC5_CLK_DRV_MASK; - if ((xt->fref == 38400) || (xt->fref == 37400) - || (xt->fref == 26000)) - tmp |= 0x15; - else - tmp |= 0x25; /* Chip Dflt Settings */ - W_REG(&cc->pllcontrol_data, tmp); - break; - - case BCM4319_CHIP_ID: - /* Change the BBPLL drive strength to 2 for all channels */ - buf_strength = 0x222222; - - /* Make sure the PLL is off */ - /* WAR65104: Disable the HT_AVAIL resource first and then - * after a delay (more than downtime for HT_AVAIL) remove the - * BBPLL resource; backplane clock moves to ALP from HT. - */ - AND_REG(&cc->min_res_mask, - ~(PMURES_BIT(RES4319_HT_AVAIL))); - AND_REG(&cc->max_res_mask, - ~(PMURES_BIT(RES4319_HT_AVAIL))); - - udelay(100); - AND_REG(&cc->min_res_mask, - ~(PMURES_BIT(RES4319_BBPLL_PWRSW_PU))); - AND_REG(&cc->max_res_mask, - ~(PMURES_BIT(RES4319_BBPLL_PWRSW_PU))); - - udelay(100); - SPINWAIT(R_REG(&cc->clk_ctl_st) & CCS_HTAVAIL, - PMU_MAX_TRANSITION_DLY); - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL4); - tmp = 0x200005c0; - W_REG(&cc->pllcontrol_data, tmp); - break; - - case BCM4336_CHIP_ID: - AND_REG(&cc->min_res_mask, - ~(PMURES_BIT(RES4336_HT_AVAIL) | - PMURES_BIT(RES4336_MACPHY_CLKAVAIL))); - AND_REG(&cc->max_res_mask, - ~(PMURES_BIT(RES4336_HT_AVAIL) | - PMURES_BIT(RES4336_MACPHY_CLKAVAIL))); - udelay(100); - SPINWAIT(R_REG(&cc->clk_ctl_st) & CCS_HTAVAIL, - PMU_MAX_TRANSITION_DLY); - break; - - case BCM4330_CHIP_ID: - AND_REG(&cc->min_res_mask, - ~(PMURES_BIT(RES4330_HT_AVAIL) | - PMURES_BIT(RES4330_MACPHY_CLKAVAIL))); - AND_REG(&cc->max_res_mask, - ~(PMURES_BIT(RES4330_HT_AVAIL) | - PMURES_BIT(RES4330_MACPHY_CLKAVAIL))); - udelay(100); - SPINWAIT(R_REG(&cc->clk_ctl_st) & CCS_HTAVAIL, - PMU_MAX_TRANSITION_DLY); - break; - - default: - break; - } - - /* Write p1div and p2div to pllcontrol[0] */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0); - tmp = R_REG(&cc->pllcontrol_data) & - ~(PMU1_PLL0_PC0_P1DIV_MASK | PMU1_PLL0_PC0_P2DIV_MASK); - tmp |= - ((xt-> - p1div << PMU1_PLL0_PC0_P1DIV_SHIFT) & PMU1_PLL0_PC0_P1DIV_MASK) | - ((xt-> - p2div << PMU1_PLL0_PC0_P2DIV_SHIFT) & PMU1_PLL0_PC0_P2DIV_MASK); - W_REG(&cc->pllcontrol_data, tmp); - - if ((sih->chip == BCM4330_CHIP_ID)) - si_pmu_set_4330_plldivs(sih); - - if ((sih->chip == BCM4329_CHIP_ID) - && (sih->chiprev == 0)) { - - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1); - tmp = R_REG(&cc->pllcontrol_data); - tmp = tmp & (~DOT11MAC_880MHZ_CLK_DIVISOR_MASK); - tmp = tmp | DOT11MAC_880MHZ_CLK_DIVISOR_VAL; - W_REG(&cc->pllcontrol_data, tmp); - } - if ((sih->chip == BCM4319_CHIP_ID) || - (sih->chip == BCM4336_CHIP_ID) || - (sih->chip == BCM4330_CHIP_ID)) - ndiv_mode = PMU1_PLL0_PC2_NDIV_MODE_MFB; - else - ndiv_mode = PMU1_PLL0_PC2_NDIV_MODE_MASH; - - /* Write ndiv_int and ndiv_mode to pllcontrol[2] */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2); - tmp = R_REG(&cc->pllcontrol_data) & - ~(PMU1_PLL0_PC2_NDIV_INT_MASK | PMU1_PLL0_PC2_NDIV_MODE_MASK); - tmp |= - ((xt-> - ndiv_int << PMU1_PLL0_PC2_NDIV_INT_SHIFT) & - PMU1_PLL0_PC2_NDIV_INT_MASK) | ((ndiv_mode << - PMU1_PLL0_PC2_NDIV_MODE_SHIFT) & - PMU1_PLL0_PC2_NDIV_MODE_MASK); - W_REG(&cc->pllcontrol_data, tmp); - - /* Write ndiv_frac to pllcontrol[3] */ - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3); - tmp = R_REG(&cc->pllcontrol_data) & ~PMU1_PLL0_PC3_NDIV_FRAC_MASK; - tmp |= ((xt->ndiv_frac << PMU1_PLL0_PC3_NDIV_FRAC_SHIFT) & - PMU1_PLL0_PC3_NDIV_FRAC_MASK); - W_REG(&cc->pllcontrol_data, tmp); - - /* Write clock driving strength to pllcontrol[5] */ - if (buf_strength) { - W_REG(&cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5); - tmp = - R_REG(&cc->pllcontrol_data) & ~PMU1_PLL0_PC5_CLK_DRV_MASK; - tmp |= (buf_strength << PMU1_PLL0_PC5_CLK_DRV_SHIFT); - W_REG(&cc->pllcontrol_data, tmp); - } - - /* to operate the 4319 usb in 24MHz/48MHz; chipcontrol[2][84:83] needs - * to be updated. - */ - if ((sih->chip == BCM4319_CHIP_ID) - && (xt->fref != XTAL_FREQ_30000MHZ)) { - W_REG(&cc->chipcontrol_addr, PMU1_PLL0_CHIPCTL2); - tmp = - R_REG(&cc->chipcontrol_data) & ~CCTL_4319USB_XTAL_SEL_MASK; - if (xt->fref == XTAL_FREQ_24000MHZ) { - tmp |= - (CCTL_4319USB_24MHZ_PLL_SEL << - CCTL_4319USB_XTAL_SEL_SHIFT); - } else if (xt->fref == XTAL_FREQ_48000MHZ) { - tmp |= - (CCTL_4319USB_48MHZ_PLL_SEL << - CCTL_4319USB_XTAL_SEL_SHIFT); - } - W_REG(&cc->chipcontrol_data, tmp); - } - - /* Flush deferred pll control registers writes */ - if (sih->pmurev >= 2) - OR_REG(&cc->pmucontrol, PCTL_PLL_PLLCTL_UPD); - - /* Write XtalFreq. Set the divisor also. */ - tmp = R_REG(&cc->pmucontrol) & - ~(PCTL_ILP_DIV_MASK | PCTL_XTALFREQ_MASK); - tmp |= (((((xt->fref + 127) / 128) - 1) << PCTL_ILP_DIV_SHIFT) & - PCTL_ILP_DIV_MASK) | - ((xt->xf << PCTL_XTALFREQ_SHIFT) & PCTL_XTALFREQ_MASK); - - if ((sih->chip == BCM4329_CHIP_ID) - && sih->chiprev == 0) { - /* clear the htstretch before clearing HTReqEn */ - AND_REG(&cc->clkstretch, ~CSTRETCH_HT); - tmp &= ~PCTL_HT_REQ_EN; - } - - W_REG(&cc->pmucontrol, tmp); -} - u32 si_pmu_ilp_clock(struct si_pub *sih) { static u32 ilpcycles_per_sec; @@ -1698,65 +712,9 @@ u32 si_pmu_ilp_clock(struct si_pub *sih) return ilpcycles_per_sec; } -void si_pmu_set_ldo_voltage(struct si_pub *sih, u8 ldo, u8 voltage) -{ - u8 sr_cntl_shift = 0, rc_shift = 0, shift = 0, mask = 0; - u8 addr = 0; - - switch (sih->chip) { - case BCM4336_CHIP_ID: - switch (ldo) { - case SET_LDO_VOLTAGE_CLDO_PWM: - addr = 4; - rc_shift = 1; - mask = 0xf; - break; - case SET_LDO_VOLTAGE_CLDO_BURST: - addr = 4; - rc_shift = 5; - mask = 0xf; - break; - case SET_LDO_VOLTAGE_LNLDO1: - addr = 4; - rc_shift = 17; - mask = 0xf; - break; - default: - return; - } - break; - case BCM4330_CHIP_ID: - switch (ldo) { - case SET_LDO_VOLTAGE_CBUCK_PWM: - addr = 3; - rc_shift = 0; - mask = 0x1f; - break; - default: - return; - } - break; - default: - return; - } - - shift = sr_cntl_shift + rc_shift; - - ai_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, regcontrol_addr), - ~0, addr); - ai_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, regcontrol_data), - mask << shift, (voltage & mask) << shift); -} - u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) { uint delay = PMU_MAX_TRANSITION_DLY; - chipcregs_t *cc; - uint origidx; -#ifdef BCMDBG - char chn[8]; - chn[0] = 0; /* to suppress compile error */ -#endif /* Remember original core before switch to chipc */ origidx = ai_coreidx(sih); @@ -1765,54 +723,9 @@ u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) switch (sih->chip) { case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43238_CHIP_ID: - case BCM4331_CHIP_ID: - case BCM6362_CHIP_ID: case BCM4313_CHIP_ID: delay = ISSIM_ENAB(sih) ? 70 : 3700; break; - case BCM4329_CHIP_ID: - if (ISSIM_ENAB(sih)) - delay = 70; - else { - u32 ilp = si_pmu_ilp_clock(sih); - delay = - (si_pmu_res_uptime(sih, cc, RES4329_HT_AVAIL) + - D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp - - 1) / ilp); - delay = (11 * delay) / 10; - } - break; - case BCM4319_CHIP_ID: - delay = ISSIM_ENAB(sih) ? 70 : 3700; - break; - case BCM4336_CHIP_ID: - if (ISSIM_ENAB(sih)) - delay = 70; - else { - u32 ilp = si_pmu_ilp_clock(sih); - delay = - (si_pmu_res_uptime(sih, cc, RES4336_HT_AVAIL) + - D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp - - 1) / ilp); - delay = (11 * delay) / 10; - } - break; - case BCM4330_CHIP_ID: - if (ISSIM_ENAB(sih)) - delay = 70; - else { - u32 ilp = si_pmu_ilp_clock(sih); - delay = - (si_pmu_res_uptime(sih, cc, RES4330_HT_AVAIL) + - D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp - - 1) / ilp); - delay = (11 * delay) / 10; - } - break; default: break; } @@ -1872,52 +785,23 @@ void si_pmu_pllupd(struct si_pub *sih) /* query alp/xtal clock frequency */ u32 si_pmu_alp_clock(struct si_pub *sih) { - chipcregs_t *cc; - uint origidx; u32 clock = ALP_CLOCK; /* bail out with default */ if (!PMUCTL_ENAB(sih)) return clock; - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - switch (sih->chip) { case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43238_CHIP_ID: - case BCM4331_CHIP_ID: - case BCM6362_CHIP_ID: - case BCM4716_CHIP_ID: - case BCM4748_CHIP_ID: - case BCM47162_CHIP_ID: case BCM4313_CHIP_ID: - case BCM5357_CHIP_ID: /* always 20Mhz */ clock = 20000 * 1000; break; - case BCM4329_CHIP_ID: - case BCM4319_CHIP_ID: - case BCM4336_CHIP_ID: - case BCM4330_CHIP_ID: - - clock = si_pmu1_alpclk0(sih, cc); - break; - case BCM5356_CHIP_ID: - /* always 25Mhz */ - clock = 25000 * 1000; - break; default: break; } - /* Return to original core */ - ai_setcoreidx(sih, origidx); return clock; } @@ -1925,32 +809,14 @@ void si_pmu_spuravoid(struct si_pub *sih, u8 spuravoid) { chipcregs_t *cc; uint origidx, intr_val; - u32 tmp = 0; /* Remember original core before switch to chipc */ cc = (chipcregs_t *) ai_switch_core(sih, CC_CORE_ID, &origidx, &intr_val); - /* force the HT off */ - if (sih->chip == BCM4336_CHIP_ID) { - tmp = R_REG(&cc->max_res_mask); - tmp &= ~RES4336_HT_AVAIL; - W_REG(&cc->max_res_mask, tmp); - /* wait for the ht to really go away */ - SPINWAIT(((R_REG(&cc->clk_ctl_st) & CCS_HTAVAIL) == 0), - 10000); - } - /* update the pll changes */ si_pmu_spuravoid_pllupdate(sih, cc, spuravoid); - /* enable HT back on */ - if (sih->chip == BCM4336_CHIP_ID) { - tmp = R_REG(&cc->max_res_mask); - tmp |= RES4336_HT_AVAIL; - W_REG(&cc->max_res_mask, tmp); - } - /* Return to original core */ ai_restore_core(sih, origidx, intr_val); } @@ -1970,15 +836,6 @@ void si_pmu_init(struct si_pub *sih) else if (sih->pmurev >= 2) OR_REG(&cc->pmucontrol, PCTL_NOILP_ON_WAIT); - if ((sih->chip == BCM4329_CHIP_ID) && (sih->chiprev == 2)) { - /* Fix for 4329b0 bad LPOM state. */ - W_REG(&cc->regcontrol_addr, 2); - OR_REG(&cc->regcontrol_data, 0x100); - - W_REG(&cc->regcontrol_addr, 3); - OR_REG(&cc->regcontrol_data, 0x4); - } - /* Return to original core */ ai_setcoreidx(sih, origidx); } @@ -2001,26 +858,6 @@ void si_pmu_chip_init(struct si_pub *sih) /* initialize PMU switch/regulators */ void si_pmu_swreg_init(struct si_pub *sih) { - switch (sih->chip) { - case BCM4336_CHIP_ID: - /* Reduce CLDO PWM output voltage to 1.2V */ - si_pmu_set_ldo_voltage(sih, SET_LDO_VOLTAGE_CLDO_PWM, 0xe); - /* Reduce CLDO BURST output voltage to 1.2V */ - si_pmu_set_ldo_voltage(sih, SET_LDO_VOLTAGE_CLDO_BURST, - 0xe); - /* Reduce LNLDO1 output voltage to 1.2V */ - si_pmu_set_ldo_voltage(sih, SET_LDO_VOLTAGE_LNLDO1, 0xe); - if (sih->chiprev == 0) - si_pmu_regcontrol(sih, 2, 0x400000, 0x400000); - break; - - case BCM4330_CHIP_ID: - /* CBUCK Voltage is 1.8 by default and set that to 1.5 */ - si_pmu_set_ldo_voltage(sih, SET_LDO_VOLTAGE_CBUCK_PWM, 0); - break; - default: - break; - } } /* initialize PLL */ @@ -2034,27 +871,11 @@ void si_pmu_pll_init(struct si_pub *sih, uint xtalfreq) cc = ai_setcoreidx(sih, SI_CC_IDX); switch (sih->chip) { - case BCM4329_CHIP_ID: - if (xtalfreq == 0) - xtalfreq = 38400; - si_pmu1_pllinit0(sih, cc, xtalfreq); - break; case BCM4313_CHIP_ID: case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43238_CHIP_ID: - case BCM4331_CHIP_ID: - case BCM6362_CHIP_ID: /* ??? */ break; - case BCM4319_CHIP_ID: - case BCM4336_CHIP_ID: - case BCM4330_CHIP_ID: - si_pmu1_pllinit0(sih, cc, xtalfreq); - break; default: break; } @@ -2068,151 +889,12 @@ void si_pmu_res_init(struct si_pub *sih) { chipcregs_t *cc; uint origidx; - const pmu_res_updown_t *pmu_res_updown_table = NULL; - uint pmu_res_updown_table_sz = 0; - const pmu_res_depend_t *pmu_res_depend_table = NULL; - uint pmu_res_depend_table_sz = 0; u32 min_mask = 0, max_mask = 0; - char name[8], *val; - uint i, rsrcs; /* Remember original core before switch to chipc */ origidx = ai_coreidx(sih); cc = ai_setcoreidx(sih, SI_CC_IDX); - switch (sih->chip) { - case BCM4329_CHIP_ID: - /* Optimize resources up/down timers */ - if (ISSIM_ENAB(sih)) { - pmu_res_updown_table = NULL; - pmu_res_updown_table_sz = 0; - } else { - pmu_res_updown_table = bcm4329_res_updown; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4329_res_updown); - } - /* Optimize resources dependencies */ - pmu_res_depend_table = bcm4329_res_depend; - pmu_res_depend_table_sz = ARRAY_SIZE(bcm4329_res_depend); - break; - - case BCM4319_CHIP_ID: - /* Optimize resources up/down timers */ - if (ISSIM_ENAB(sih)) { - pmu_res_updown_table = bcm4319a0_res_updown_qt; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4319a0_res_updown_qt); - } else { - pmu_res_updown_table = bcm4319a0_res_updown; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4319a0_res_updown); - } - /* Optimize resources dependancies masks */ - pmu_res_depend_table = bcm4319a0_res_depend; - pmu_res_depend_table_sz = ARRAY_SIZE(bcm4319a0_res_depend); - break; - - case BCM4336_CHIP_ID: - /* Optimize resources up/down timers */ - if (ISSIM_ENAB(sih)) { - pmu_res_updown_table = bcm4336a0_res_updown_qt; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4336a0_res_updown_qt); - } else { - pmu_res_updown_table = bcm4336a0_res_updown; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4336a0_res_updown); - } - /* Optimize resources dependancies masks */ - pmu_res_depend_table = bcm4336a0_res_depend; - pmu_res_depend_table_sz = ARRAY_SIZE(bcm4336a0_res_depend); - break; - - case BCM4330_CHIP_ID: - /* Optimize resources up/down timers */ - if (ISSIM_ENAB(sih)) { - pmu_res_updown_table = bcm4330a0_res_updown_qt; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4330a0_res_updown_qt); - } else { - pmu_res_updown_table = bcm4330a0_res_updown; - pmu_res_updown_table_sz = - ARRAY_SIZE(bcm4330a0_res_updown); - } - /* Optimize resources dependancies masks */ - pmu_res_depend_table = bcm4330a0_res_depend; - pmu_res_depend_table_sz = ARRAY_SIZE(bcm4330a0_res_depend); - break; - - default: - break; - } - - /* # resources */ - rsrcs = (sih->pmucaps & PCAP_RC_MASK) >> PCAP_RC_SHIFT; - - /* Program up/down timers */ - while (pmu_res_updown_table_sz--) { - W_REG(&cc->res_table_sel, - pmu_res_updown_table[pmu_res_updown_table_sz].resnum); - W_REG(&cc->res_updn_timer, - pmu_res_updown_table[pmu_res_updown_table_sz].updown); - } - /* Apply nvram overrides to up/down timers */ - for (i = 0; i < rsrcs; i++) { - snprintf(name, sizeof(name), "r%dt", i); - val = getvar(NULL, name); - if (val == NULL) - continue; - W_REG(&cc->res_table_sel, (u32) i); - W_REG(&cc->res_updn_timer, - (u32) simple_strtoul(val, NULL, 0)); - } - - /* Program resource dependencies table */ - while (pmu_res_depend_table_sz--) { - if (pmu_res_depend_table[pmu_res_depend_table_sz].filter != NULL - && !(pmu_res_depend_table[pmu_res_depend_table_sz]. - filter) (sih)) - continue; - for (i = 0; i < rsrcs; i++) { - if ((pmu_res_depend_table[pmu_res_depend_table_sz]. - res_mask & PMURES_BIT(i)) == 0) - continue; - W_REG(&cc->res_table_sel, i); - switch (pmu_res_depend_table[pmu_res_depend_table_sz]. - action) { - case RES_DEPEND_SET: - W_REG(&cc->res_dep_mask, - pmu_res_depend_table - [pmu_res_depend_table_sz].depend_mask); - break; - case RES_DEPEND_ADD: - OR_REG(&cc->res_dep_mask, - pmu_res_depend_table - [pmu_res_depend_table_sz].depend_mask); - break; - case RES_DEPEND_REMOVE: - AND_REG(&cc->res_dep_mask, - ~pmu_res_depend_table - [pmu_res_depend_table_sz].depend_mask); - break; - default: - break; - } - } - } - /* Apply nvram overrides to dependancies masks */ - for (i = 0; i < rsrcs; i++) { - snprintf(name, sizeof(name), "r%dd", i); - val = getvar(NULL, name); - if (val == NULL) - continue; - W_REG(&cc->res_table_sel, (u32) i); - W_REG(&cc->res_dep_mask, - (u32) simple_strtoul(val, NULL, 0)); - } - /* Determine min/max rsrc masks */ si_pmu_res_masks(sih, &min_mask, &max_mask); @@ -2287,109 +969,3 @@ u32 si_pmu_measure_alpclk(struct si_pub *sih) return alp_khz; } - -bool si_pmu_is_otp_powered(struct si_pub *sih) -{ - uint idx; - chipcregs_t *cc; - bool st; - - /* Remember original core before switch to chipc */ - idx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - switch (sih->chip) { - case BCM4329_CHIP_ID: - st = (R_REG(&cc->res_state) & PMURES_BIT(RES4329_OTP_PU)) - != 0; - break; - case BCM4319_CHIP_ID: - st = (R_REG(&cc->res_state) & PMURES_BIT(RES4319_OTP_PU)) - != 0; - break; - case BCM4336_CHIP_ID: - st = (R_REG(&cc->res_state) & PMURES_BIT(RES4336_OTP_PU)) - != 0; - break; - case BCM4330_CHIP_ID: - st = (R_REG(&cc->res_state) & PMURES_BIT(RES4330_OTP_PU)) - != 0; - break; - - /* These chip doesn't use PMU bit to power up/down OTP. OTP always on. - * Use OTP_INIT command to reset/refresh state. - */ - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - case BCM43421_CHIP_ID: - case BCM43236_CHIP_ID: - case BCM43235_CHIP_ID: - case BCM43238_CHIP_ID: - st = true; - break; - default: - st = true; - break; - } - - /* Return to original core */ - ai_setcoreidx(sih, idx); - return st; -} - -/* power up/down OTP through PMU resources */ -void si_pmu_otp_power(struct si_pub *sih, bool on) -{ - chipcregs_t *cc; - uint origidx; - u32 rsrcs = 0; /* rsrcs to turn on/off OTP power */ - - /* Don't do anything if OTP is disabled */ - if (ai_is_otp_disabled(sih)) - return; - - /* Remember original core before switch to chipc */ - origidx = ai_coreidx(sih); - cc = ai_setcoreidx(sih, SI_CC_IDX); - - switch (sih->chip) { - case BCM4329_CHIP_ID: - rsrcs = PMURES_BIT(RES4329_OTP_PU); - break; - case BCM4319_CHIP_ID: - rsrcs = PMURES_BIT(RES4319_OTP_PU); - break; - case BCM4336_CHIP_ID: - rsrcs = PMURES_BIT(RES4336_OTP_PU); - break; - case BCM4330_CHIP_ID: - rsrcs = PMURES_BIT(RES4330_OTP_PU); - break; - default: - break; - } - - if (rsrcs != 0) { - u32 otps; - - /* Figure out the dependancies (exclude min_res_mask) */ - u32 deps = si_pmu_res_deps(sih, cc, rsrcs, true); - u32 min_mask = 0, max_mask = 0; - si_pmu_res_masks(sih, &min_mask, &max_mask); - deps &= ~min_mask; - /* Turn on/off the power */ - if (on) { - OR_REG(&cc->min_res_mask, (rsrcs | deps)); - SPINWAIT(!(R_REG(&cc->res_state) & rsrcs), - PMU_MAX_TRANSITION_DLY); - } else { - AND_REG(&cc->min_res_mask, ~(rsrcs | deps)); - } - - SPINWAIT((((otps = R_REG(&cc->otpstatus)) & OTPS_READY) != - (on ? OTPS_READY : 0)), 100); - } - - /* Return to original core */ - ai_setcoreidx(sih, origidx); -} diff --git a/drivers/staging/brcm80211/brcmsmac/pmu.h b/drivers/staging/brcm80211/brcmsmac/pmu.h index 9a98890..0c7e48c 100644 --- a/drivers/staging/brcm80211/brcmsmac/pmu.h +++ b/drivers/staging/brcm80211/brcmsmac/pmu.h @@ -33,7 +33,6 @@ #define SET_LDO_VOLTAGE_LNLDO1 9 #define SET_LDO_VOLTAGE_LNLDO2_SEL 10 -extern void si_pmu_set_ldo_voltage(struct si_pub *sih, u8 ldo, u8 voltage); extern u16 si_pmu_fast_pwrup_delay(struct si_pub *sih); extern void si_pmu_sprom_enable(struct si_pub *sih, bool enable); extern u32 si_pmu_chipcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val); @@ -49,7 +48,5 @@ extern void si_pmu_pll_init(struct si_pub *sih, u32 xtalfreq); extern void si_pmu_res_init(struct si_pub *sih); extern void si_pmu_swreg_init(struct si_pub *sih); extern u32 si_pmu_measure_alpclk(struct si_pub *sih); -extern bool si_pmu_is_otp_powered(struct si_pub *sih); -extern void si_pmu_otp_power(struct si_pub *sih, bool on); #endif /* _BRCM_PMU_H_ */ |