summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Zijlstra <peterz@infradead.org>2017-03-23 15:56:11 +0100
committerThomas Gleixner <tglx@linutronix.de>2017-04-04 11:44:06 +0200
commitacd58620e415aee4a43a808d7d2fd87259ee0001 (patch)
treeb0971a53edac32523a6b99b4bd5f15200041634e
parentaa2bfe55366552cb7e93e8709d66e698d79ccc47 (diff)
downloadop-kernel-dev-acd58620e415aee4a43a808d7d2fd87259ee0001.zip
op-kernel-dev-acd58620e415aee4a43a808d7d2fd87259ee0001.tar.gz
sched/rtmutex: Refactor rt_mutex_setprio()
With the introduction of SCHED_DEADLINE the whole notion that priority is a single number is gone, therefore the @prio argument to rt_mutex_setprio() doesn't make sense anymore. So rework the code to pass a pi_task instead. Note this also fixes a problem with pi_top_task caching; previously we would not set the pointer (call rt_mutex_update_top_task) if the priority didn't change, this could lead to a stale pointer. As for the XXX, I think its fine to use pi_task->prio, because if it differs from waiter->prio, a PI chain update is immenent. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170323150216.303827095@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-rw-r--r--include/linux/sched/rt.h24
-rw-r--r--kernel/locking/rtmutex.c112
-rw-r--r--kernel/sched/core.c66
3 files changed, 91 insertions, 111 deletions
diff --git a/include/linux/sched/rt.h b/include/linux/sched/rt.h
index 10ee7ee..f93329a 100644
--- a/include/linux/sched/rt.h
+++ b/include/linux/sched/rt.h
@@ -18,28 +18,20 @@ static inline int rt_task(struct task_struct *p)
}
#ifdef CONFIG_RT_MUTEXES
-extern int rt_mutex_getprio(struct task_struct *p);
-extern void rt_mutex_setprio(struct task_struct *p, int prio);
-extern int rt_mutex_get_effective_prio(struct task_struct *task, int newprio);
-extern void rt_mutex_update_top_task(struct task_struct *p);
-extern struct task_struct *rt_mutex_get_top_task(struct task_struct *task);
+/*
+ * Must hold either p->pi_lock or task_rq(p)->lock.
+ */
+static inline struct task_struct *rt_mutex_get_top_task(struct task_struct *p)
+{
+ return p->pi_top_task;
+}
+extern void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task);
extern void rt_mutex_adjust_pi(struct task_struct *p);
static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
{
return tsk->pi_blocked_on != NULL;
}
#else
-static inline int rt_mutex_getprio(struct task_struct *p)
-{
- return p->normal_prio;
-}
-
-static inline int rt_mutex_get_effective_prio(struct task_struct *task,
- int newprio)
-{
- return newprio;
-}
-
static inline struct task_struct *rt_mutex_get_top_task(struct task_struct *task)
{
return NULL;
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 4b1015e..00b49cd 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -322,67 +322,16 @@ rt_mutex_dequeue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter)
RB_CLEAR_NODE(&waiter->pi_tree_entry);
}
-/*
- * Must hold both p->pi_lock and task_rq(p)->lock.
- */
-void rt_mutex_update_top_task(struct task_struct *p)
-{
- if (!task_has_pi_waiters(p)) {
- p->pi_top_task = NULL;
- return;
- }
-
- p->pi_top_task = task_top_pi_waiter(p)->task;
-}
-
-/*
- * Calculate task priority from the waiter tree priority
- *
- * Return task->normal_prio when the waiter tree is empty or when
- * the waiter is not allowed to do priority boosting
- */
-int rt_mutex_getprio(struct task_struct *task)
-{
- if (likely(!task_has_pi_waiters(task)))
- return task->normal_prio;
-
- return min(task_top_pi_waiter(task)->prio,
- task->normal_prio);
-}
-
-/*
- * Must hold either p->pi_lock or task_rq(p)->lock.
- */
-struct task_struct *rt_mutex_get_top_task(struct task_struct *task)
-{
- return task->pi_top_task;
-}
-
-/*
- * Called by sched_setscheduler() to get the priority which will be
- * effective after the change.
- */
-int rt_mutex_get_effective_prio(struct task_struct *task, int newprio)
+static void rt_mutex_adjust_prio(struct task_struct *p)
{
- struct task_struct *top_task = rt_mutex_get_top_task(task);
+ struct task_struct *pi_task = NULL;
- if (!top_task)
- return newprio;
+ lockdep_assert_held(&p->pi_lock);
- return min(top_task->prio, newprio);
-}
+ if (task_has_pi_waiters(p))
+ pi_task = task_top_pi_waiter(p)->task;
-/*
- * Adjust the priority of a task, after its pi_waiters got modified.
- *
- * This can be both boosting and unboosting. task->pi_lock must be held.
- */
-static void __rt_mutex_adjust_prio(struct task_struct *task)
-{
- int prio = rt_mutex_getprio(task);
-
- if (task->prio != prio || dl_prio(prio))
- rt_mutex_setprio(task, prio);
+ rt_mutex_setprio(p, pi_task);
}
/*
@@ -742,7 +691,7 @@ static int rt_mutex_adjust_prio_chain(struct task_struct *task,
*/
rt_mutex_dequeue_pi(task, prerequeue_top_waiter);
rt_mutex_enqueue_pi(task, waiter);
- __rt_mutex_adjust_prio(task);
+ rt_mutex_adjust_prio(task);
} else if (prerequeue_top_waiter == waiter) {
/*
@@ -758,7 +707,7 @@ static int rt_mutex_adjust_prio_chain(struct task_struct *task,
rt_mutex_dequeue_pi(task, waiter);
waiter = rt_mutex_top_waiter(lock);
rt_mutex_enqueue_pi(task, waiter);
- __rt_mutex_adjust_prio(task);
+ rt_mutex_adjust_prio(task);
} else {
/*
* Nothing changed. No need to do any priority
@@ -966,7 +915,7 @@ static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
return -EDEADLK;
raw_spin_lock(&task->pi_lock);
- __rt_mutex_adjust_prio(task);
+ rt_mutex_adjust_prio(task);
waiter->task = task;
waiter->lock = lock;
waiter->prio = task->prio;
@@ -988,7 +937,7 @@ static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
rt_mutex_dequeue_pi(owner, top_waiter);
rt_mutex_enqueue_pi(owner, waiter);
- __rt_mutex_adjust_prio(owner);
+ rt_mutex_adjust_prio(owner);
if (owner->pi_blocked_on)
chain_walk = 1;
} else if (rt_mutex_cond_detect_deadlock(waiter, chwalk)) {
@@ -1040,13 +989,14 @@ static void mark_wakeup_next_waiter(struct wake_q_head *wake_q,
waiter = rt_mutex_top_waiter(lock);
/*
- * Remove it from current->pi_waiters. We do not adjust a
- * possible priority boost right now. We execute wakeup in the
- * boosted mode and go back to normal after releasing
- * lock->wait_lock.
+ * Remove it from current->pi_waiters and deboost.
+ *
+ * We must in fact deboost here in order to ensure we call
+ * rt_mutex_setprio() to update p->pi_top_task before the
+ * task unblocks.
*/
rt_mutex_dequeue_pi(current, waiter);
- __rt_mutex_adjust_prio(current);
+ rt_mutex_adjust_prio(current);
/*
* As we are waking up the top waiter, and the waiter stays
@@ -1058,9 +1008,19 @@ static void mark_wakeup_next_waiter(struct wake_q_head *wake_q,
*/
lock->owner = (void *) RT_MUTEX_HAS_WAITERS;
- raw_spin_unlock(&current->pi_lock);
-
+ /*
+ * We deboosted before waking the top waiter task such that we don't
+ * run two tasks with the 'same' priority (and ensure the
+ * p->pi_top_task pointer points to a blocked task). This however can
+ * lead to priority inversion if we would get preempted after the
+ * deboost but before waking our donor task, hence the preempt_disable()
+ * before unlock.
+ *
+ * Pairs with preempt_enable() in rt_mutex_postunlock();
+ */
+ preempt_disable();
wake_q_add(wake_q, waiter->task);
+ raw_spin_unlock(&current->pi_lock);
}
/*
@@ -1095,7 +1055,7 @@ static void remove_waiter(struct rt_mutex *lock,
if (rt_mutex_has_waiters(lock))
rt_mutex_enqueue_pi(owner, rt_mutex_top_waiter(lock));
- __rt_mutex_adjust_prio(owner);
+ rt_mutex_adjust_prio(owner);
/* Store the lock on which owner is blocked or NULL */
next_lock = task_blocked_on_lock(owner);
@@ -1134,8 +1094,7 @@ void rt_mutex_adjust_pi(struct task_struct *task)
raw_spin_lock_irqsave(&task->pi_lock, flags);
waiter = task->pi_blocked_on;
- if (!waiter || (waiter->prio == task->prio &&
- !dl_prio(task->prio))) {
+ if (!waiter || (waiter->prio == task->prio && !dl_prio(task->prio))) {
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
return;
}
@@ -1389,17 +1348,6 @@ static bool __sched rt_mutex_slowunlock(struct rt_mutex *lock,
* Queue the next waiter for wakeup once we release the wait_lock.
*/
mark_wakeup_next_waiter(wake_q, lock);
-
- /*
- * We should deboost before waking the top waiter task such that
- * we don't run two tasks with the 'same' priority. This however
- * can lead to prio-inversion if we would get preempted after
- * the deboost but before waking our high-prio task, hence the
- * preempt_disable before unlock. Pairs with preempt_enable() in
- * rt_mutex_postunlock();
- */
- preempt_disable();
-
raw_spin_unlock_irqrestore(&lock->wait_lock, flags);
return true; /* call rt_mutex_postunlock() */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e1f44ec..37b152a 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3671,10 +3671,25 @@ EXPORT_SYMBOL(default_wake_function);
#ifdef CONFIG_RT_MUTEXES
+static inline int __rt_effective_prio(struct task_struct *pi_task, int prio)
+{
+ if (pi_task)
+ prio = min(prio, pi_task->prio);
+
+ return prio;
+}
+
+static inline int rt_effective_prio(struct task_struct *p, int prio)
+{
+ struct task_struct *pi_task = rt_mutex_get_top_task(p);
+
+ return __rt_effective_prio(pi_task, prio);
+}
+
/*
* rt_mutex_setprio - set the current priority of a task
- * @p: task
- * @prio: prio value (kernel-internal form)
+ * @p: task to boost
+ * @pi_task: donor task
*
* This function changes the 'effective' priority of a task. It does
* not touch ->normal_prio like __setscheduler().
@@ -3682,18 +3697,42 @@ EXPORT_SYMBOL(default_wake_function);
* Used by the rt_mutex code to implement priority inheritance
* logic. Call site only calls if the priority of the task changed.
*/
-void rt_mutex_setprio(struct task_struct *p, int prio)
+void rt_mutex_setprio(struct task_struct *p, struct task_struct *pi_task)
{
- int oldprio, queued, running, queue_flag =
+ int prio, oldprio, queued, running, queue_flag =
DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
const struct sched_class *prev_class;
struct rq_flags rf;
struct rq *rq;
- BUG_ON(prio > MAX_PRIO);
+ /* XXX used to be waiter->prio, not waiter->task->prio */
+ prio = __rt_effective_prio(pi_task, p->normal_prio);
+
+ /*
+ * If nothing changed; bail early.
+ */
+ if (p->pi_top_task == pi_task && prio == p->prio && !dl_prio(prio))
+ return;
rq = __task_rq_lock(p, &rf);
update_rq_clock(rq);
+ /*
+ * Set under pi_lock && rq->lock, such that the value can be used under
+ * either lock.
+ *
+ * Note that there is loads of tricky to make this pointer cache work
+ * right. rt_mutex_slowunlock()+rt_mutex_postunlock() work together to
+ * ensure a task is de-boosted (pi_task is set to NULL) before the
+ * task is allowed to run again (and can exit). This ensures the pointer
+ * points to a blocked task -- which guaratees the task is present.
+ */
+ p->pi_top_task = pi_task;
+
+ /*
+ * For FIFO/RR we only need to set prio, if that matches we're done.
+ */
+ if (prio == p->prio && !dl_prio(prio))
+ goto out_unlock;
/*
* Idle task boosting is a nono in general. There is one
@@ -3713,9 +3752,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
goto out_unlock;
}
- rt_mutex_update_top_task(p);
-
- trace_sched_pi_setprio(p, prio);
+ trace_sched_pi_setprio(p, prio); /* broken */
oldprio = p->prio;
if (oldprio == prio)
@@ -3739,7 +3776,6 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
* running task
*/
if (dl_prio(prio)) {
- struct task_struct *pi_task = rt_mutex_get_top_task(p);
if (!dl_prio(p->normal_prio) ||
(pi_task && dl_entity_preempt(&pi_task->dl, &p->dl))) {
p->dl.dl_boosted = 1;
@@ -3777,6 +3813,11 @@ out_unlock:
balance_callback(rq);
preempt_enable();
}
+#else
+static inline int rt_effective_prio(struct task_struct *p, int prio)
+{
+ return prio;
+}
#endif
void set_user_nice(struct task_struct *p, long nice)
@@ -4023,10 +4064,9 @@ static void __setscheduler(struct rq *rq, struct task_struct *p,
* Keep a potential priority boosting if called from
* sched_setscheduler().
*/
+ p->prio = normal_prio(p);
if (keep_boost)
- p->prio = rt_mutex_get_effective_prio(p, normal_prio(p));
- else
- p->prio = normal_prio(p);
+ p->prio = rt_effective_prio(p, p->prio);
if (dl_prio(p->prio))
p->sched_class = &dl_sched_class;
@@ -4313,7 +4353,7 @@ change:
* the runqueue. This will be done when the task deboost
* itself.
*/
- new_effective_prio = rt_mutex_get_effective_prio(p, newprio);
+ new_effective_prio = rt_effective_prio(p, newprio);
if (new_effective_prio == oldprio)
queue_flags &= ~DEQUEUE_MOVE;
}
OpenPOWER on IntegriCloud