Blackfin: unify duplicated power masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

13 files changed, 104 insertions, 459 deletions

diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 925e66c..1597ae5 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,7 +1,7 @@
 /*
  * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
  *
- * Copyright (C) 2004-2008 Analog Device Inc.
+ * Copyright (C) 2004-2009 Analog Device Inc.
  *
  * Licensed under the GPL-2
  */
@@ -9,7 +9,109 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
-#ifdef __KERNEL__
+/* PLL_CTL Masks */
+#define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF			0x0002	/* PLL Not Powered */
+#define STOPCK			0x0008	/* Core Clock Off */
+#define PDWN			0x0020	/* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY		0x0014	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x00C0	/* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS			0x0100	/* Bypass the PLL */
+#define MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST		0x8000	/* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL			0x000F	/* System Select */
+#define CSEL			0x0030	/* Core Select */
+#define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
+#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
+#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
+#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
+#define FULL_ON			0x0002	/* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
+#define CANWS			0x0800	/* CAN Wake-Up Status */
+#define USBWS			0x2000	/* USB Wake-Up Status */
+#define KPADWS			0x4000	/* Keypad Wake-Up Status */
+#define ROTWS			0x8000	/* Rotary Wake-Up Status */
+#define GPWS			0x1000	/* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
+#else
+#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN			0x000C	/* Voltage Level Gain */
+#define GAIN_5			0x0000	/* GAIN = 5 */
+#define GAIN_10			0x0004	/* GAIN = 1 */
+#define GAIN_20			0x0008	/* GAIN = 2 */
+#define GAIN_50			0x000C	/* GAIN = 5 */
+
+#define VLEV			0x00F0	/* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085 		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
+#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
+#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
+#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
+#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
+#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
+#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
+#endif
+
 #ifndef __ASSEMBLY__
 
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
@@ -54,6 +156,5 @@ struct bfin_dpmc_platform_data {
 	w[P0 + (x - PLL_CTL)] = R0;\
 
 #endif
-#endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 6cfb246..9053462 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -58,10 +58,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 78253e8..a97a2bb 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -585,58 +585,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF			0x0002	/* PLL Not Powered									*/
-#define STOPCK			0x0008	/* Core Clock Off									*/
-#define PDWN			0x0020	/* Enter Deep Sleep Mode							*/
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches			*/
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals			*/
-#define BYPASS			0x0100	/* Bypass the PLL									*/
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors			*/
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select						*/
-#define	CSEL			0x0030	/* Core Select							*/
-#define CSEL_DIV1		0x0000	/* 		CCLK = VCO / 1					*/
-#define CSEL_DIV2		0x0010	/* 		CCLK = VCO / 2					*/
-#define	CSEL_DIV4		0x0020	/* 		CCLK = VCO / 4					*/
-#define	CSEL_DIV8		0x0030	/* 		CCLK = VCO / 8					*/
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* VR_CTL Masks	*/
-#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/* 		VLEV = 1.25 V (-5% - +10% Accuracy)	*/
-#define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled	*/
-#define	FULL_ON				0x0002	/* Processor In Full On Mode					*/
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled	*/
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached					*/
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index e7d6034..f714c5d 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -46,10 +46,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 6e6a8df..da42e9c 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -586,58 +586,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF			0x0002	/* PLL Not Powered									*/
-#define STOPCK			0x0008	/* Core Clock Off									*/
-#define PDWN			0x0020	/* Enter Deep Sleep Mode							*/
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches			*/
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals			*/
-#define BYPASS			0x0100	/* Bypass the PLL									*/
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors			*/
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select						*/
-#define	CSEL			0x0030	/* Core Select							*/
-#define CSEL_DIV1		0x0000	/* 		CCLK = VCO / 1					*/
-#define CSEL_DIV2		0x0010	/* 		CCLK = VCO / 2					*/
-#define	CSEL_DIV4		0x0020	/* 		CCLK = VCO / 4					*/
-#define	CSEL_DIV8		0x0030	/* 		CCLK = VCO / 8					*/
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* VR_CTL Masks	*/
-#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/* 		VLEV = 1.25 V (-5% - +10% Accuracy)	*/
-#define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled	*/
-#define	FULL_ON				0x0002	/* Processor In Full On Mode					*/
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled	*/
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached					*/
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 02b328e..7e61fe7 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -370,72 +370,6 @@
 /* System MMR Register Bits */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN			0x0000  /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2			0x0001  /* Pass CLKIN/2 to PLL */
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF				0x0002  /* Shut off PLL clocks */
-#define STOPCK_OFF			0x0008  /* Core clock off */
-#define STOPCK				0x0008	/* Core Clock Off									*/
-#define PDWN				0x0020  /* Put the PLL in a Deep Sleep state */
-#if !defined(__ADSPBF538__)
-/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
-# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
-# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
-#endif
-#define BYPASS				0x0100  /* Bypass the PLL */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks */
-#define SSEL				0x000F	/* System Select						*/
-#define	CSEL				0x0030	/* Core Select							*/
-
-#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
-
-#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
-#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
-#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
-#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
-
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
-#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
-
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
 #define CHIPID_FAMILY          0x0FFFF000
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index eab006d..a12d4b6 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -40,10 +40,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a6d20ca..868e1a1 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -958,67 +958,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2                                     */
-#define PLL_OFF			0x0002	/* PLL Not Powered                                                                      */
-#define STOPCK			0x0008	/* Core Clock Off                                                                       */
-#define PDWN			0x0020	/* Enter Deep Sleep Mode                                                        */
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches                        */
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals                       */
-#define BYPASS			0x0100	/* Bypass the PLL                                                                       */
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors                       */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select                                                */
-#define	CSEL			0x0030	/* Core Select                                                  */
-#define CSEL_DIV1		0x0000	/*              CCLK = VCO / 1                                  */
-#define CSEL_DIV2		0x0010	/*              CCLK = VCO / 2                                  */
-#define	CSEL_DIV4		0x0020	/*              CCLK = VCO / 4                                  */
-#define	CSEL_DIV8		0x0030	/*              CCLK = VCO / 8                                  */
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
-
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
-#define	HIBERNATE		0x0000	/*              Powerdown/Bypass On-Board Regulation    */
-#define	FREQ_333		0x0001	/*              Switching Frequency Is 333 kHz                  */
-#define	FREQ_667		0x0002	/*              Switching Frequency Is 667 kHz                  */
-#define	FREQ_1000		0x0003	/*              Switching Frequency Is 1 MHz                    */
-
-#define GAIN			0x000C	/* Voltage Level Gain   */
-#define	GAIN_5			0x0000	/*              GAIN = 5                */
-#define	GAIN_10			0x0004	/*              GAIN = 10               */
-#define	GAIN_20			0x0008	/*              GAIN = 20               */
-#define	GAIN_50			0x000C	/*              GAIN = 50               */
-
-#define	VLEV			0x00F0	/* Internal Voltage Level                                       */
-#define	VLEV_085 		0x0060	/*              VLEV = 0.85 V (-5% - +10% Accuracy)     */
-#define	VLEV_090		0x0070	/*              VLEV = 0.90 V (-5% - +10% Accuracy)     */
-#define	VLEV_095		0x0080	/*              VLEV = 0.95 V (-5% - +10% Accuracy)     */
-#define	VLEV_100		0x0090	/*              VLEV = 1.00 V (-5% - +10% Accuracy)     */
-#define	VLEV_105		0x00A0	/*              VLEV = 1.05 V (-5% - +10% Accuracy)     */
-#define	VLEV_110		0x00B0	/*              VLEV = 1.10 V (-5% - +10% Accuracy)     */
-#define	VLEV_115		0x00C0	/*              VLEV = 1.15 V (-5% - +10% Accuracy)     */
-#define	VLEV_120		0x00D0	/*              VLEV = 1.20 V (-5% - +10% Accuracy)     */
-#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
-#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate       */
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 278e894..08b5eab 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -37,10 +37,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 312686a..5375819b 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -1422,81 +1422,6 @@
 /* System MMR Register Bits and	Macros */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-/* PLL_CTL Masks */
-#define	PLL_CLKIN			0x0000	/* Pass	CLKIN to PLL */
-#define	PLL_CLKIN_DIV2		0x0001	/* Pass	CLKIN/2	to PLL */
-#define	DF					0x0001	 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define	PLL_OFF				0x0002	/* Shut	off PLL	clocks */
-
-#define	STOPCK				0x0008	/* Core	Clock Off		 */
-#define	PDWN				0x0020	/* Put the PLL in a Deep Sleep state */
-#define	IN_DELAY			0x0014	/* EBIU	Input Delay Select */
-#define	OUT_DELAY			0x00C0	/* EBIU	Output Delay Select */
-#define	BYPASS				0x0100	/* Bypass the PLL */
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
-
-/* PLL_CTL Macros				 */
-#ifdef _MISRA_RULES
-#define	SET_MSEL(x)		(((x)&0x3Fu) <<	0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03u) <<	0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02u) << 0x3) |	(((x)&0x01u) <<	0x2))
-#else
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03) << 0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02) <<	0x3) | (((x)&0x01) << 0x2))
-#endif /* _MISRA_RULES */
-
-/* PLL_DIV Masks */
-#define	SSEL				0x000F	/* System Select */
-#define	CSEL				0x0030	/* Core	Select */
-#define	CSEL_DIV1		0x0000	/*		CCLK = VCO / 1 */
-#define	CSEL_DIV2		0x0010	/*		CCLK = VCO / 2 */
-#define	CSEL_DIV4		0x0020	/*		CCLK = VCO / 4 */
-#define	CSEL_DIV8		0x0030	/*		CCLK = VCO / 8 */
-
-#define	SCLK_DIV(x)			(x)		/* SCLK	= VCO /	x */
-
-/* PLL_DIV Macros							 */
-#ifdef _MISRA_RULES
-#define	SET_SSEL(x)			((x)&0xFu)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#else
-#define	SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#endif /* _MISRA_RULES */
-
-/* PLL_STAT Masks										 */
-#define	ACTIVE_PLLENABLED	0x0001	/* Processor In	Active Mode With PLL Enabled */
-#define	FULL_ON				0x0002	/* Processor In	Full On	Mode */
-#define	ACTIVE_PLLDISABLED	0x0004	/* Processor In	Active Mode With PLL Disabled */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been	Reached */
-
-/* VR_CTL Masks										 */
-#define	FREQ			0x0003	/* Switching Oscillator	Frequency For Regulator */
-#define	HIBERNATE		0x0000	/*		Powerdown/Bypass On-Board Regulation */
-#define	FREQ_333		0x0001	/*		Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/*		Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/*		Switching Frequency Is 1 MHz */
-
-#define	GAIN			0x000C	/* Voltage Level Gain */
-#define	GAIN_5			0x0000	/*		GAIN = 5 */
-#define	GAIN_10			0x0004	/*		GAIN = 10 */
-#define	GAIN_20			0x0008	/*		GAIN = 20 */
-#define	GAIN_50			0x000C	/*		GAIN = 50 */
-
-#define	VLEV			0x00F0	/* Internal Voltage Level - Only Program Values	Within Specifications */
-#define	VLEV_100		0x0090	/*	VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_105		0x00A0	/*	VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_110		0x00B0	/*	VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_115		0x00C0	/*	VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_120		0x00D0	/*	VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_125		0x00E0	/*	VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_130		0x00F0	/*	VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From	Hibernate */
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
-#define	MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
-#define	SCKELOW			0x8000	/* Do Not Drive	SCKE High During Reset After Hibernate */
-
 /* SWRST Mask */
 #define	SYSTEM_RESET	0x0007	/* Initiates A System Software Reset */
 #define	DOUBLE_FAULT	0x0008	/* Core	Double Fault Causes Reset */
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 13302b6..5684030 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -64,10 +64,4 @@
 #define OFFSET_THR              0x28	/* Transmit Holding register            */
 #define OFFSET_RBR              0x2C	/* Receive Buffer register              */
 
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1	/* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2	/* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4	/* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8	/* CCLK = VCO / 8 */
-
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 855bc608..6d97b4e 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -2075,26 +2075,6 @@
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
 #define                   SECSTAT  0xe0       /* Secure Status */
 
-/* Bit masks for PLL_DIV */
-
-#define                      CSEL  0x30       /* Core Select */
-#define                      SSEL  0xf        /* System Select */
-#define			CSEL_DIV1	0x0000	/* CCLK = VCO / 1 */
-#define			CSEL_DIV2	0x0010	/* CCLK = VCO / 2 */
-#define			CSEL_DIV4	0x0020	/* CCLK = VCO / 4 */
-#define			CSEL_DIV8	0x0030	/* CCLK = VCO / 8 */
-
-/* Bit masks for PLL_CTL */
-
-#define                      MSEL  0x7e00     /* Multiplier Select */
-#define                    BYPASS  0x100      /* PLL Bypass Enable */
-#define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
-#define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
-#define                      PDWN  0x20       /* Power Down */
-#define                    STOPCK  0x8        /* Stop Clock */
-#define                   PLL_OFF  0x2        /* Disable PLL */
-#define                        DF  0x1        /* Divide Frequency */
-
 /* SWRST Masks */
 #define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
 #define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
@@ -2102,52 +2082,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for PLL_STAT */
-
-#define                PLL_LOCKED  0x20       /* PLL Locked Status */
-#define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
-#define                   FULL_ON  0x2        /* Full-On Mode */
-#define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
-#define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
-#define                     CANWS  0x800      /* CAN Wake-Up Status */
-#define                     USBWS  0x2000     /* USB Wake-Up Status */
-#define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
-#define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
-#define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
-
-/* Bit masks for VR_CTL */
-
-#define                      FREQ  0x3        /* Regulator Switching Frequency */
-#define                      GAIN  0xc        /* Voltage Output Level Gain */
-#define                      VLEV  0xf0       /* Internal Voltage Level */
-#define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
-#define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
-#define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
-#define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
-#define                     USBWE  0x800      /* USB Wake-Up Enable */
-#define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
-#define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
-
-#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
-
-#define	GAIN_5			0x0000	/* GAIN = 5*/
-#define	GAIN_10			0x0004	/* GAIN = 1*/
-#define	GAIN_20			0x0008	/* GAIN = 2*/
-#define	GAIN_50			0x000C	/* GAIN = 5*/
-
-#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index a31e509..c2f9c8f 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -884,65 +884,11 @@
 /* System MMR Register Bits */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN              0x00000000	/* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2         0x00000001	/* Pass CLKIN/2 to PLL */
-#define PLL_OFF                0x00000002	/* Shut off PLL clocks */
-#define STOPCK_OFF             0x00000008	/* Core clock off */
-#define PDWN                   0x00000020	/* Put the PLL in a Deep Sleep state */
-#define BYPASS                 0x00000100	/* Bypass the PLL */
-
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
 #define CHIPID_FAMILY          0x0FFFF000
 #define CHIPID_MANUFACTURE     0x00000FFE
 
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
-
-#define	GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* GAIN = 5*/
-#define	GAIN_10			0x0004	/* GAIN = 1*/
-#define	GAIN_20			0x0008	/* GAIN = 2*/
-#define	GAIN_50			0x000C	/* GAIN = 5*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level */
-#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
-#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
-
-/* PLL_DIV Masks */
-#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
-
-#define CSEL			0x30		/* Core Select */
-#define SSEL			0xf		/* System Select */
-#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
-#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
-#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
-#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
-
 /* SICA_SYSCR Masks */
 #define COREB_SRAM_INIT		0x0020