summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRhyland Klein <rklein@nvidia.com>2010-09-05 15:31:23 -0700
committerAnton Vorontsov <cbouatmailru@gmail.com>2010-09-06 11:35:39 +0400
commita7640bfa10c558b7cbabb4b98d6bc356d3c2ec55 (patch)
tree6d07f0e17d45d91fcddf677674e15ce74e4f9bbb
parent2d98dae206daad05d794255b15bd0eb31c9294d0 (diff)
downloadop-kernel-dev-a7640bfa10c558b7cbabb4b98d6bc356d3c2ec55.zip
op-kernel-dev-a7640bfa10c558b7cbabb4b98d6bc356d3c2ec55.tar.gz
power_supply: Add driver for TI BQ20Z75 gas gauge IC
This driver depends on I2C and uses SMBUS for communication with the host. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
-rw-r--r--drivers/power/Kconfig7
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/bq20z75.c385
3 files changed, 393 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c2a1b8b..4d9a637 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -109,6 +109,13 @@ config BATTERY_WM97XX
help
Say Y to enable support for battery measured by WM97xx aux port.
+config BATTERY_BQ20Z75
+ tristate "TI BQ20z75 gas gauge"
+ depends on I2C
+ help
+ Say Y to include support for TI BQ20z75 SBS-compliant
+ gas gauge and protection IC.
+
config BATTERY_BQ27x00
tristate "BQ27x00 battery driver"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index c73d381..2799a84 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
+obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
new file mode 100644
index 0000000..a1c7ae2
--- /dev/null
+++ b/drivers/power/bq20z75.c
@@ -0,0 +1,385 @@
+/*
+ * Gas Gauge driver for TI's BQ20Z75
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+enum {
+ REG_MANUFACTURER_DATA,
+ REG_TEMPERATURE,
+ REG_VOLTAGE,
+ REG_CURRENT,
+ REG_CAPACITY,
+ REG_TIME_TO_EMPTY,
+ REG_TIME_TO_FULL,
+ REG_STATUS,
+ REG_CYCLE_COUNT,
+ REG_SERIAL_NUMBER
+};
+
+/* manufacturer access defines */
+#define MANUFACTURER_ACCESS_STATUS 0x0006
+#define MANUFACTURER_ACCESS_SLEEP 0x0011
+
+/* battery status value bits */
+#define BATTERY_CHARGING 0x40
+#define BATTERY_FULL_CHARGED 0x20
+#define BATTERY_FULL_DISCHARGED 0x10
+
+#define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \
+ .psp = _psp, \
+ .addr = _addr, \
+ .min_value = _min_value, \
+ .max_value = _max_value, \
+}
+
+static const struct bq20z75_device_data {
+ enum power_supply_property psp;
+ u8 addr;
+ int min_value;
+ int max_value;
+} bq20z75_data[] = {
+ [REG_MANUFACTURER_DATA] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+ [REG_TEMPERATURE] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+ [REG_VOLTAGE] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
+ [REG_CURRENT] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768,
+ 32767),
+ [REG_CAPACITY] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
+ [REG_TIME_TO_EMPTY] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0,
+ 65535),
+ [REG_TIME_TO_FULL] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0,
+ 65535),
+ [REG_STATUS] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+ [REG_CYCLE_COUNT] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+ [REG_SERIAL_NUMBER] =
+ BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+};
+
+static enum power_supply_property bq20z75_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+struct bq20z75_info {
+ struct i2c_client *client;
+ struct power_supply power_supply;
+};
+
+static int bq20z75_get_battery_presence_and_health(
+ struct i2c_client *client, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ s32 ret;
+
+ /* Write to ManufacturerAccess with
+ * ManufacturerAccess command and then
+ * read the status */
+ ret = i2c_smbus_write_word_data(client,
+ bq20z75_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_STATUS);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: i2c write for battery presence failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_word_data(client,
+ bq20z75_data[REG_MANUFACTURER_DATA].addr);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: i2c read for battery presence failed\n",
+ __func__);
+ return -EIO;
+ }
+
+ if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
+ ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
+ val->intval = 0;
+ return 0;
+ }
+
+ /* Mask the upper nibble of 2nd byte and
+ * lower byte of response then
+ * shift the result by 8 to get status*/
+ ret &= 0x0F00;
+ ret >>= 8;
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ if (ret == 0x0F)
+ /* battery removed */
+ val->intval = 0;
+ else
+ val->intval = 1;
+ } else if (psp == POWER_SUPPLY_PROP_HEALTH) {
+ if (ret == 0x09)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (ret == 0x0B)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (ret == 0x0C)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ return 0;
+}
+
+static int bq20z75_get_battery_property(struct i2c_client *client,
+ int reg_offset, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_word_data(client,
+ bq20z75_data[reg_offset].addr);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: i2c read for %d failed\n", __func__, reg_offset);
+ return -EIO;
+ }
+
+ if (ret >= bq20z75_data[reg_offset].min_value &&
+ ret <= bq20z75_data[reg_offset].max_value) {
+ val->intval = ret;
+ if (psp == POWER_SUPPLY_PROP_STATUS) {
+ if (ret & BATTERY_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ret & BATTERY_FULL_CHARGED)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (ret & BATTERY_FULL_DISCHARGED)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ /* bq20z75 provides battery tempreture in 0.1°K
+ * so convert it to °C */
+ else if (psp == POWER_SUPPLY_PROP_TEMP)
+ val->intval = ret - 2731;
+ } else {
+ if (psp == POWER_SUPPLY_PROP_STATUS)
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ else
+ val->intval = 0;
+ }
+
+ return 0;
+}
+
+static int bq20z75_get_battery_capacity(struct i2c_client *client,
+ union power_supply_propval *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, bq20z75_data[REG_CAPACITY].addr);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: i2c read for %d failed\n", __func__, REG_CAPACITY);
+ return -EIO;
+ }
+
+ /* bq20z75 spec says that this can be >100 %
+ * even if max value is 100 % */
+ val->intval = min(ret, 100);
+
+ return 0;
+}
+
+static int bq20z75_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int count;
+ int ret;
+ struct bq20z75_info *bq20z75_device = container_of(psy,
+ struct bq20z75_info, power_supply);
+ struct i2c_client *client = bq20z75_device->client;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq20z75_get_battery_presence_and_health(client, psp, val);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = bq20z75_get_battery_capacity(client, val);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_TEMP:
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) {
+ if (psp == bq20z75_data[count].psp)
+ break;
+ }
+
+ ret = bq20z75_get_battery_property(client, count, psp, val);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ dev_err(&client->dev,
+ "%s: INVALID property\n", __func__);
+ return -EINVAL;
+ }
+
+ dev_dbg(&client->dev,
+ "%s: property = %d, value = %d\n", __func__, psp, val->intval);
+
+ return 0;
+}
+
+static int bq20z75_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bq20z75_info *bq20z75_device;
+ int rc;
+
+ bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
+ if (!bq20z75_device)
+ return -ENOMEM;
+
+ bq20z75_device->client = client;
+ bq20z75_device->power_supply.name = "battery";
+ bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
+ bq20z75_device->power_supply.properties = bq20z75_properties;
+ bq20z75_device->power_supply.num_properties =
+ ARRAY_SIZE(bq20z75_properties);
+ bq20z75_device->power_supply.get_property = bq20z75_get_property;
+
+ i2c_set_clientdata(client, bq20z75_device);
+
+ rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
+ if (rc) {
+ dev_err(&client->dev,
+ "%s: Failed to register power supply\n", __func__);
+ kfree(bq20z75_device);
+ return rc;
+ }
+
+ dev_info(&client->dev,
+ "%s: battery gas gauge device registered\n", client->name);
+
+ return 0;
+}
+
+static int bq20z75_remove(struct i2c_client *client)
+{
+ struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+
+ power_supply_unregister(&bq20z75_device->power_supply);
+ kfree(bq20z75_device);
+ bq20z75_device = NULL;
+
+ return 0;
+}
+
+#if defined CONFIG_PM
+static int bq20z75_suspend(struct i2c_client *client,
+ pm_message_t state)
+{
+ s32 ret;
+
+ /* write to manufacturer access with sleep command */
+ ret = i2c_smbus_write_word_data(client,
+ bq20z75_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_SLEEP);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: i2c write for %d failed\n",
+ __func__, MANUFACTURER_ACCESS_SLEEP);
+ return -EIO;
+ }
+
+ return 0;
+}
+#else
+#define bq20z75_suspend NULL
+#endif
+/* any smbus transaction will wake up bq20z75 */
+#define bq20z75_resume NULL
+
+static const struct i2c_device_id bq20z75_id[] = {
+ { "bq20z75", 0 },
+ {}
+};
+
+static struct i2c_driver bq20z75_battery_driver = {
+ .probe = bq20z75_probe,
+ .remove = bq20z75_remove,
+ .suspend = bq20z75_suspend,
+ .resume = bq20z75_resume,
+ .id_table = bq20z75_id,
+ .driver = {
+ .name = "bq20z75-battery",
+ },
+};
+
+static int __init bq20z75_battery_init(void)
+{
+ return i2c_add_driver(&bq20z75_battery_driver);
+}
+module_init(bq20z75_battery_init);
+
+static void __exit bq20z75_battery_exit(void)
+{
+ i2c_del_driver(&bq20z75_battery_driver);
+}
+module_exit(bq20z75_battery_exit);
+
+MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud