summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMatthew Wilcox <matthew@wil.cx>2007-10-05 15:55:08 -0400
committerJames Bottomley <jejb@mulgrave.localdomain>2007-10-23 15:11:57 -0400
commita44131b35ec1a46ed75014d818cb9d5706117b49 (patch)
tree2e0db739539cff760cfb3cf01b9f0c8c5ed18773
parent8637baa3609afff9fe4c65ad4c64d72484c699fc (diff)
downloadop-kernel-dev-a44131b35ec1a46ed75014d818cb9d5706117b49.zip
op-kernel-dev-a44131b35ec1a46ed75014d818cb9d5706117b49.tar.gz
[SCSI] sym53c8xx: Remove tag_ctrl module parameter
With sysfs making these options tunable at runtime, there's no justification for keeping this horrendously complex specification string around. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-rw-r--r--Documentation/scsi/sym53c8xx_2.txt21
-rw-r--r--drivers/scsi/sym53c8xx_2/sym53c8xx.h1
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c66
3 files changed, 8 insertions, 80 deletions
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 3d9f06b..49ea5c5 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -449,25 +449,14 @@ options as above.
cmd_per_lun=#tags (#tags > 1) tagged command queuing enabled
#tags will be truncated to the max queued commands configuration parameter.
-10.2.2 Detailed control of tagged commands
- This option allows you to specify a command queue depth for each device
- that supports tagged command queueing.
- Example:
- tag_ctrl=10/t2t3q16-t5q24/t1u2q32
- will set devices queue depth as follow:
- - controller #0 target #2 and target #3 -> 16 commands,
- - controller #0 target #5 -> 24 commands,
- - controller #1 target #1 logical unit #2 -> 32 commands,
- - all other logical units (all targets, all controllers) -> 10 commands.
-
-10.2.3 Burst max
+10.2.2 Burst max
burst=0 burst disabled
burst=255 get burst length from initial IO register settings.
burst=#x burst enabled (1<<#x burst transfers max)
#x is an integer value which is log base 2 of the burst transfers max.
By default the driver uses the maximum value supported by the chip.
-10.2.4 LED support
+10.2.3 LED support
led=1 enable LED support
led=0 disable LED support
Do not enable LED support if your scsi board does not use SDMS BIOS.
@@ -560,9 +549,9 @@ Previously, the sym2 driver accepted arguments of the form
sym53c8xx=tags:4,sync:10,debug:0x200
As a result of the new module parameters, this is no longer available.
-Most of the options have remained the same, but tags has split into
-cmd_per_lun and tag_ctrl for its two different purposes. The sample above
-would be specified as:
+Most of the options have remained the same, but tags has become
+cmd_per_lun to reflect its different purposes. The sample above would
+be specified as:
modprobe sym53c8xx cmd_per_lun=4 sync=10 debug=0x200
or on the kernel boot line as:
diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
index 7519728..62d29cf 100644
--- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h
+++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
@@ -127,7 +127,6 @@ struct sym_driver_setup {
u_char settle_delay;
u_char use_nvram;
u_long excludes[8];
- char tag_ctrl[100];
};
#define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 6e768c5..c1d9f69 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -63,7 +63,6 @@ unsigned int sym_debug_flags = 0;
static char *excl_string;
static char *safe_string;
module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
-module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0);
module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
@@ -78,7 +77,6 @@ module_param_named(excl, excl_string, charp, 0);
module_param_named(safe, safe_string, charp, 0);
MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
-MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN");
MODULE_PARM_DESC(burst, "Maximum burst. 0 to disable, 255 to read from registers");
MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
@@ -744,59 +742,6 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
}
}
-/*
- * Linux select queue depths function
- */
-#define DEF_DEPTH (sym_driver_setup.max_tag)
-#define ALL_TARGETS -2
-#define NO_TARGET -1
-#define ALL_LUNS -2
-#define NO_LUN -1
-
-static int device_queue_depth(struct sym_hcb *np, int target, int lun)
-{
- int c, h, t, u, v;
- char *p = sym_driver_setup.tag_ctrl;
- char *ep;
-
- h = -1;
- t = NO_TARGET;
- u = NO_LUN;
- while ((c = *p++) != 0) {
- v = simple_strtoul(p, &ep, 0);
- switch(c) {
- case '/':
- ++h;
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- case 't':
- if (t != target)
- t = (target == v) ? v : NO_TARGET;
- u = ALL_LUNS;
- break;
- case 'u':
- if (u != lun)
- u = (lun == v) ? v : NO_LUN;
- break;
- case 'q':
- if (h == np->s.unit &&
- (t == ALL_TARGETS || t == target) &&
- (u == ALL_LUNS || u == lun))
- return v;
- break;
- case '-':
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- default:
- break;
- }
- p = ep;
- }
- return DEF_DEPTH;
-}
-
static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
@@ -861,21 +806,16 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
* Use at least 2.
* Donnot use more than our maximum.
*/
- reqtags = device_queue_depth(np, sdev->id, sdev->lun);
+ reqtags = sym_driver_setup.max_tag;
if (reqtags > tp->usrtags)
reqtags = tp->usrtags;
if (!sdev->tagged_supported)
reqtags = 0;
-#if 1 /* Avoid to locally queue commands for no good reasons */
if (reqtags > SYM_CONF_MAX_TAG)
reqtags = SYM_CONF_MAX_TAG;
- depth_to_use = (reqtags ? reqtags : 2);
-#else
- depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2);
-#endif
+ depth_to_use = reqtags ? reqtags : 2;
scsi_adjust_queue_depth(sdev,
- (sdev->tagged_supported ?
- MSG_SIMPLE_TAG : 0),
+ sdev->tagged_supported ? MSG_SIMPLE_TAG : 0,
depth_to_use);
lp->s.scdev_depth = depth_to_use;
sym_tune_dev_queuing(tp, sdev->lun, reqtags);
OpenPOWER on IntegriCloud