summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-28 13:43:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-28 13:43:12 -0700
commita410963ba4c0c768302f0298e258b1ee940e8316 (patch)
treef262f101a5bf752ce14775da080aed5fbaf73f0e
parentf7da9cdf45cbbad5029d4858dcbc0134e06084ed (diff)
parent5db20c49e2d6581797c17057e068d89d6677aa24 (diff)
downloadop-kernel-dev-a410963ba4c0c768302f0298e258b1ee940e8316.zip
op-kernel-dev-a410963ba4c0c768302f0298e258b1ee940e8316.tar.gz
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
-rw-r--r--Documentation/devicetree/bindings/i2c/gpio-i2c.txt (renamed from Documentation/devicetree/bindings/gpio/gpio_i2c.txt)0
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mxs.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-ocores.txt33
-rw-r--r--Documentation/devicetree/bindings/i2c/mrvl-i2c.txt19
-rw-r--r--arch/arm/boot/dts/imx28.dtsi2
-rw-r--r--arch/arm/mach-ux500/board-mop500.c2
-rw-r--r--arch/arm/mach-ux500/devices-common.h24
-rw-r--r--arch/arm/plat-mxc/include/mach/i2c.h2
-rw-r--r--drivers/i2c/busses/Kconfig7
-rw-r--r--drivers/i2c/busses/i2c-at91.c13
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c147
-rw-r--r--drivers/i2c/busses/i2c-imx.c75
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c133
-rw-r--r--drivers/i2c/busses/i2c-mxs.c68
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c189
-rw-r--r--drivers/i2c/busses/i2c-ocores.c113
-rw-r--r--drivers/i2c/busses/i2c-omap.c155
-rw-r--r--drivers/i2c/busses/i2c-pnx.c19
-rw-r--r--drivers/i2c/busses/i2c-puv3.c15
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c6
-rw-r--r--drivers/i2c/busses/i2c-stu300.c102
-rw-r--r--drivers/i2c/busses/i2c-tegra.c122
-rw-r--r--drivers/mfd/timberdale.c2
-rw-r--r--include/linux/i2c-ocores.h3
-rw-r--r--include/linux/platform_data/i2c-nomadik.h (renamed from arch/arm/plat-nomadik/include/plat/i2c.h)6
25 files changed, 693 insertions, 567 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt
index 4f8ec94..4f8ec94 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/gpio-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
index 1bfc02d..30ac3a0 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -4,6 +4,8 @@ Required properties:
- compatible: Should be "fsl,<chip>-i2c"
- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
+- clock-frequency: Desired I2C bus clock frequency in Hz.
+ Only 100000Hz and 400000Hz modes are supported.
Examples:
@@ -13,4 +15,5 @@ i2c0: i2c@80058000 {
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
+ clock-frequency = <100000>;
};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
new file mode 100644
index 0000000..c15781f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -0,0 +1,33 @@
+Device tree configuration for i2c-ocores
+
+Required properties:
+- compatible : "opencores,i2c-ocores"
+- reg : bus address start and address range size of device
+- interrupts : interrupt number
+- clock-frequency : frequency of bus clock in Hz
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Optional properties:
+- reg-shift : device register offsets are shifted by this value
+- reg-io-width : io register width in bytes (1, 2 or 4)
+- regstep : deprecated, use reg-shift above
+
+Example:
+
+ i2c0: ocores@a0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "opencores,i2c-ocores";
+ reg = <0xa0000000 0x8>;
+ interrupts = <10>;
+ clock-frequency = <20000000>;
+
+ reg-shift = <0>; /* 8 bit registers */
+ reg-io-width = <1>; /* 8 bit read/write */
+
+ dummy@60 {
+ compatible = "dummy";
+ reg = <0x60>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index b891ee2..0f79450 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -1,4 +1,4 @@
-* I2C
+* Marvell MMP I2C controller
Required properties :
@@ -32,3 +32,20 @@ Examples:
interrupts = <58>;
};
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : Should be "marvell,mv64xxx-i2c"
+ - interrupts : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ };
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 915db89..787efac 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -660,6 +660,7 @@
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
+ clock-frequency = <100000>;
status = "disabled";
};
@@ -669,6 +670,7 @@
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 2000>;
interrupts = <110 69>;
+ clock-frequency = <100000>;
status = "disabled";
};
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a310222..8f421c0 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/platform_data/i2c-nomadik.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
@@ -40,7 +41,6 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
-#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/gpio-nomadik.h>
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 6e47065..ecdd838 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -12,7 +12,7 @@
#include <linux/dma-mapping.h>
#include <linux/sys_soc.h>
#include <linux/amba/bus.h>
-#include <plat/i2c.h>
+#include <linux/platform_data/i2c-nomadik.h>
#include <mach/crypto-ux500.h>
struct spi_master_cntlr;
@@ -56,27 +56,15 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
struct nmk_i2c_controller;
-static inline struct platform_device *
+static inline struct amba_device *
dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
struct nmk_i2c_controller *data)
{
- struct resource res[] = {
- DEFINE_RES_MEM(base, SZ_4K),
- DEFINE_RES_IRQ(irq),
- };
+ /* Conjure a name similar to what the platform device used to have */
+ char name[16];
- struct platform_device_info pdevinfo = {
- .parent = parent,
- .name = "nmk-i2c",
- .id = id,
- .res = res,
- .num_res = ARRAY_SIZE(res),
- .data = data,
- .size_data = sizeof(*data),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- return platform_device_register_full(&pdevinfo);
+ snprintf(name, sizeof(name), "nmk-i2c.%d", id);
+ return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
}
static inline struct amba_device *
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 375cdd0..8289d91 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -15,7 +15,7 @@
*
**/
struct imxi2c_platform_data {
- int bitrate;
+ u32 bitrate;
};
#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2e7530a..b4aaa1b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -462,7 +462,7 @@ config I2C_MPC
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
+ depends on (MV64X60 || PLAT_ORION)
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -483,10 +483,11 @@ config I2C_MXS
config I2C_NOMADIK
tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
- depends on PLAT_NOMADIK
+ depends on ARM_AMBA
help
If you say yes to this option, support will be included for the
- I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
+ I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
+ as well as the STA2X11 PCIe I/O HUB.
config I2C_NUC900
tristate "NUC900 I2C Driver"
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1679dee..e24484b 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -279,30 +279,31 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev)
/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
-static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int at91_i2c_suspend(struct device *dev)
{
clk_disable(twi_clk);
return 0;
}
-static int at91_i2c_resume(struct platform_device *pdev)
+static int at91_i2c_resume(struct device *dev)
{
return clk_enable(twi_clk);
}
+static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume);
+#define AT91_I2C_PM (&at91_i2c_pm)
+
#else
-#define at91_i2c_suspend NULL
-#define at91_i2c_resume NULL
+#define AT91_I2C_PM NULL
#endif
static struct platform_driver at91_i2c_driver = {
.probe = at91_i2c_probe,
.remove = __devexit_p(at91_i2c_remove),
- .suspend = at91_i2c_suspend,
- .resume = at91_i2c_resume,
.driver = {
.name = "at91_i2c",
.owner = THIS_MODULE,
+ .pm = AT91_I2C_PM,
},
};
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index cdb59e5..0cf780f 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -25,6 +25,7 @@
#include <asm/blackfin.h>
#include <asm/portmux.h>
#include <asm/irq.h>
+#include <asm/bfin_twi.h>
/* SMBus mode*/
#define TWI_I2C_MODE_STANDARD 1
@@ -32,56 +33,6 @@
#define TWI_I2C_MODE_COMBINED 3
#define TWI_I2C_MODE_REPEAT 4
-struct bfin_twi_iface {
- int irq;
- spinlock_t lock;
- char read_write;
- u8 command;
- u8 *transPtr;
- int readNum;
- int writeNum;
- int cur_mode;
- int manual_stop;
- int result;
- struct i2c_adapter adap;
- struct completion complete;
- struct i2c_msg *pmsg;
- int msg_num;
- int cur_msg;
- u16 saved_clkdiv;
- u16 saved_control;
- void __iomem *regs_base;
-};
-
-
-#define DEFINE_TWI_REG(reg, off) \
-static inline u16 read_##reg(struct bfin_twi_iface *iface) \
- { return bfin_read16(iface->regs_base + (off)); } \
-static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \
- { bfin_write16(iface->regs_base + (off), v); }
-
-DEFINE_TWI_REG(CLKDIV, 0x00)
-DEFINE_TWI_REG(CONTROL, 0x04)
-DEFINE_TWI_REG(SLAVE_CTL, 0x08)
-DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
-DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
-DEFINE_TWI_REG(MASTER_CTL, 0x14)
-DEFINE_TWI_REG(MASTER_STAT, 0x18)
-DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
-DEFINE_TWI_REG(INT_STAT, 0x20)
-DEFINE_TWI_REG(INT_MASK, 0x24)
-DEFINE_TWI_REG(FIFO_CTL, 0x28)
-DEFINE_TWI_REG(FIFO_STAT, 0x2C)
-DEFINE_TWI_REG(XMT_DATA8, 0x80)
-DEFINE_TWI_REG(XMT_DATA16, 0x84)
-DEFINE_TWI_REG(RCV_DATA8, 0x88)
-DEFINE_TWI_REG(RCV_DATA16, 0x8C)
-
-static const u16 pin_req[2][3] = {
- {P_TWI0_SCL, P_TWI0_SDA, 0},
- {P_TWI1_SCL, P_TWI1_SDA, 0},
-};
-
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short twi_int_status)
{
@@ -99,7 +50,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
*/
else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MDIR | RSTART);
+ read_MASTER_CTL(iface) | MDIR);
else if (iface->manual_stop)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
@@ -107,10 +58,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | RSTART | MDIR);
+ read_MASTER_CTL(iface) | MDIR);
else
write_MASTER_CTL(iface,
- (read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+ read_MASTER_CTL(iface) & ~MDIR);
}
}
if (twi_int_status & RCVSERV) {
@@ -130,17 +81,25 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
}
iface->transPtr++;
iface->readNum--;
- } else if (iface->manual_stop) {
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | STOP);
- } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg + 1 < iface->msg_num) {
- if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | RSTART | MDIR);
- else
+ }
+
+ if (iface->readNum == 0) {
+ if (iface->manual_stop) {
+ /* Temporary workaround to avoid possible bus stall -
+ * Flush FIFO before issuing the STOP condition
+ */
+ read_RCV_DATA16(iface);
write_MASTER_CTL(iface,
- (read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+ read_MASTER_CTL(iface) | STOP);
+ } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+ iface->cur_msg + 1 < iface->msg_num) {
+ if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) | MDIR);
+ else
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) & ~MDIR);
+ }
}
}
if (twi_int_status & MERR) {
@@ -193,7 +152,8 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
return;
}
if (twi_int_status & MCOMP) {
- if ((read_MASTER_CTL(iface) & MEN) == 0 &&
+ if (twi_int_status & (XMTSERV | RCVSERV) &&
+ (read_MASTER_CTL(iface) & MEN) == 0 &&
(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
iface->result = -1;
@@ -221,7 +181,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg+1 < iface->msg_num) {
+ iface->cur_msg + 1 < iface->msg_num) {
iface->cur_msg++;
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
iface->writeNum = iface->readNum =
@@ -241,27 +201,29 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
}
}
- if (iface->pmsg[iface->cur_msg].len <= 255)
- write_MASTER_CTL(iface,
+ if (iface->pmsg[iface->cur_msg].len <= 255) {
+ write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
- (iface->pmsg[iface->cur_msg].len << 6));
- else {
+ (iface->pmsg[iface->cur_msg].len << 6));
+ iface->manual_stop = 0;
+ } else {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) |
(0xff << 6)));
iface->manual_stop = 1;
}
- /* remove restart bit and enable master receive */
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) & ~RSTART);
+ /* remove restart bit before last message */
+ if (iface->cur_msg + 1 == iface->msg_num)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) & ~RSTART);
} else {
iface->result = 1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
}
+ complete(&iface->complete);
}
- complete(&iface->complete);
}
/* Interrupt handler */
@@ -298,8 +260,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
- while (read_MASTER_STAT(iface) & BUSBUSY)
- yield();
+ if (read_MASTER_STAT(iface) & BUSBUSY)
+ return -EAGAIN;
iface->pmsg = msgs;
iface->msg_num = num;
@@ -311,7 +273,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
return -EINVAL;
}
- iface->cur_mode = TWI_I2C_MODE_REPEAT;
+ if (iface->msg_num > 1)
+ iface->cur_mode = TWI_I2C_MODE_REPEAT;
iface->manual_stop = 0;
iface->transPtr = pmsg->buf;
iface->writeNum = iface->readNum = pmsg->len;
@@ -356,6 +319,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+ (iface->msg_num > 1 ? RSTART : 0) |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
SSYNC();
@@ -398,8 +362,8 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
- while (read_MASTER_STAT(iface) & BUSBUSY)
- yield();
+ if (read_MASTER_STAT(iface) & BUSBUSY)
+ return -EAGAIN;
iface->writeNum = 0;
iface->readNum = 0;
@@ -520,7 +484,7 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
else
write_MASTER_CTL(iface, 0x1 << 6);
/* Master enable */
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+ write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
@@ -611,9 +575,9 @@ static struct i2c_algorithm bfin_twi_algorithm = {
.functionality = bfin_twi_functionality,
};
-static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
+static int i2c_bfin_twi_suspend(struct device *dev)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+ struct bfin_twi_iface *iface = dev_get_drvdata(dev);
iface->saved_clkdiv = read_CLKDIV(iface);
iface->saved_control = read_CONTROL(iface);
@@ -626,14 +590,14 @@ static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state
return 0;
}
-static int i2c_bfin_twi_resume(struct platform_device *pdev)
+static int i2c_bfin_twi_resume(struct device *dev)
{
- struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+ struct bfin_twi_iface *iface = dev_get_drvdata(dev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- 0, pdev->name, iface);
+ 0, to_platform_device(dev)->name, iface);
if (rc) {
- dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+ dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
}
@@ -646,6 +610,9 @@ static int i2c_bfin_twi_resume(struct platform_device *pdev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
+ i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
struct bfin_twi_iface *iface;
@@ -695,7 +662,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
- rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
+ rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
+ "i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
goto out_error_pin_mux;
@@ -742,7 +710,7 @@ out_error_add_adapter:
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
- peripheral_free_list(pin_req[pdev->id]);
+ peripheral_free_list((unsigned short *)pdev->dev.platform_data);
out_error_pin_mux:
iounmap(iface->regs_base);
out_error_ioremap:
@@ -760,7 +728,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
- peripheral_free_list(pin_req[pdev->id]);
+ peripheral_free_list((unsigned short *)pdev->dev.platform_data);
iounmap(iface->regs_base);
kfree(iface);
@@ -770,11 +738,10 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
static struct platform_driver i2c_bfin_twi_driver = {
.probe = i2c_bfin_twi_probe,
.remove = i2c_bfin_twi_remove,
- .suspend = i2c_bfin_twi_suspend,
- .resume = i2c_bfin_twi_resume,
.driver = {
.name = "i2c-bfin-twi",
.owner = THIS_MODULE,
+ .pm = &i2c_bfin_twi_pm,
},
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 370031a..0722f86 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -117,10 +117,8 @@ static u16 __initdata i2c_clk_div[50][2] = {
struct imx_i2c_struct {
struct i2c_adapter adapter;
- struct resource *res;
struct clk *clk;
void __iomem *base;
- int irq;
wait_queue_head_t queue;
unsigned long i2csr;
unsigned int disable_delay;
@@ -472,9 +470,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
struct pinctrl *pinctrl;
void __iomem *base;
- resource_size_t res_size;
- int irq, bitrate;
- int ret;
+ int irq, ret;
+ u32 bitrate;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -489,25 +486,15 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
- res_size = resource_size(res);
-
- if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
+ base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!base)
return -EBUSY;
- }
-
- base = ioremap(res->start, res_size);
- if (!base) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -EIO;
- goto fail1;
- }
- i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
+ i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct),
+ GFP_KERNEL);
if (!i2c_imx) {
dev_err(&pdev->dev, "can't allocate interface\n");
- ret = -ENOMEM;
- goto fail2;
+ return -ENOMEM;
}
/* Setup i2c_imx driver structure */
@@ -517,29 +504,27 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
- i2c_imx->irq = irq;
i2c_imx->base = base;
- i2c_imx->res = res;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
- goto fail3;
+ dev_err(&pdev->dev, "can't get/select pinctrl\n");
+ return PTR_ERR(pinctrl);
}
/* Get I2C clock */
- i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
+ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_imx->clk)) {
- ret = PTR_ERR(i2c_imx->clk);
dev_err(&pdev->dev, "can't get I2C clock\n");
- goto fail3;
+ return PTR_ERR(i2c_imx->clk);
}
/* Request IRQ */
- ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
+ ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
+ pdev->name, i2c_imx);
if (ret) {
- dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq);
- goto fail4;
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ return ret;
}
/* Init queue */
@@ -564,7 +549,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "registration failed\n");
- goto fail5;
+ return ret;
}
of_i2c_register_devices(&i2c_imx->adapter);
@@ -572,28 +557,16 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
- dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq);
+ dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
- i2c_imx->res->start, i2c_imx->res->end);
- dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n",
- res_size, i2c_imx->res->start);
+ res->start, res->end);
+ dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n",
+ resource_size(res), res->start);
dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
i2c_imx->adapter.name);
dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
return 0; /* Return OK */
-
-fail5:
- free_irq(i2c_imx->irq, i2c_imx);
-fail4:
- clk_put(i2c_imx->clk);
-fail3:
- kfree(i2c_imx);
-fail2:
- iounmap(base);
-fail1:
- release_mem_region(res->start, resource_size(res));
- return ret; /* Return error number */
}
static int __exit i2c_imx_remove(struct platform_device *pdev)
@@ -605,20 +578,12 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
i2c_del_adapter(&i2c_imx->adapter);
platform_set_drvdata(pdev, NULL);
- /* free interrupt */
- free_irq(i2c_imx->irq, i2c_imx);
-
/* setup chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_IADR);
writeb(0, i2c_imx->base + IMX_I2C_IFDR);
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- clk_put(i2c_imx->clk);
-
- iounmap(i2c_imx->base);
- release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
- kfree(i2c_imx);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 4f44a33..2e9d567 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -18,6 +18,11 @@
#include <linux/mv643xx_i2c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
/* Register defines */
#define MV64XXX_I2C_REG_SLAVE_ADDR 0x00
@@ -98,6 +103,9 @@ struct mv64xxx_i2c_data {
int rc;
u32 freq_m;
u32 freq_n;
+#if defined(CONFIG_HAVE_CLK)
+ struct clk *clk;
+#endif
wait_queue_head_t waitq;
spinlock_t lock;
struct i2c_msg *msg;
@@ -521,6 +529,82 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
drv_data->reg_base_p = 0;
}
+#ifdef CONFIG_OF
+static int __devinit
+mv64xxx_calc_freq(const int tclk, const int n, const int m)
+{
+ return tclk / (10 * (m + 1) * (2 << n));
+}
+
+static bool __devinit
+mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
+ u32 *best_m)
+{
+ int freq, delta, best_delta = INT_MAX;
+ int m, n;
+
+ for (n = 0; n <= 7; n++)
+ for (m = 0; m <= 15; m++) {
+ freq = mv64xxx_calc_freq(tclk, n, m);
+ delta = req_freq - freq;
+ if (delta >= 0 && delta < best_delta) {
+ *best_m = m;
+ *best_n = n;
+ best_delta = delta;
+ }
+ if (best_delta == 0)
+ return true;
+ }
+ if (best_delta == INT_MAX)
+ return false;
+ return true;
+}
+
+static int __devinit
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+ struct device_node *np)
+{
+ u32 bus_freq, tclk;
+ int rc = 0;
+
+ /* CLK is mandatory when using DT to describe the i2c bus. We
+ * need to know tclk in order to calculate bus clock
+ * factors.
+ */
+#if !defined(CONFIG_HAVE_CLK)
+ /* Have OF but no CLK */
+ return -ENODEV;
+#else
+ if (IS_ERR(drv_data->clk)) {
+ rc = -ENODEV;
+ goto out;
+ }
+ tclk = clk_get_rate(drv_data->clk);
+ of_property_read_u32(np, "clock-frequency", &bus_freq);
+ if (!mv64xxx_find_baud_factors(bus_freq, tclk,
+ &drv_data->freq_n, &drv_data->freq_m)) {
+ rc = -EINVAL;
+ goto out;
+ }
+ drv_data->irq = irq_of_parse_and_map(np, 0);
+
+ /* Its not yet defined how timeouts will be specified in device tree.
+ * So hard code the value to 1 second.
+ */
+ drv_data->adapter.timeout = HZ;
+out:
+ return rc;
+#endif
+}
+#else /* CONFIG_OF */
+static int __devinit
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+ struct device_node *np)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
static int __devinit
mv64xxx_i2c_probe(struct platform_device *pd)
{
@@ -528,7 +612,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
int rc;
- if ((pd->id != 0) || !pdata)
+ if ((!pdata && !pd->dev.of_node))
return -ENODEV;
drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
@@ -546,19 +630,35 @@ mv64xxx_i2c_probe(struct platform_device *pd)
init_waitqueue_head(&drv_data->waitq);
spin_lock_init(&drv_data->lock);
- drv_data->freq_m = pdata->freq_m;
- drv_data->freq_n = pdata->freq_n;
- drv_data->irq = platform_get_irq(pd, 0);
+#if defined(CONFIG_HAVE_CLK)
+ /* Not all platforms have a clk */
+ drv_data->clk = clk_get(&pd->dev, NULL);
+ if (!IS_ERR(drv_data->clk)) {
+ clk_prepare(drv_data->clk);
+ clk_enable(drv_data->clk);
+ }
+#endif
+ if (pdata) {
+ drv_data->freq_m = pdata->freq_m;
+ drv_data->freq_n = pdata->freq_n;
+ drv_data->irq = platform_get_irq(pd, 0);
+ drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+ } else if (pd->dev.of_node) {
+ rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
+ if (rc)
+ goto exit_unmap_regs;
+ }
if (drv_data->irq < 0) {
rc = -ENXIO;
goto exit_unmap_regs;
}
+
drv_data->adapter.dev.parent = &pd->dev;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
drv_data->adapter.nr = pd->id;
+ drv_data->adapter.dev.of_node = pd->dev.of_node;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
@@ -577,11 +677,20 @@ mv64xxx_i2c_probe(struct platform_device *pd)
goto exit_free_irq;
}
+ of_i2c_register_devices(&drv_data->adapter);
+
return 0;
exit_free_irq:
free_irq(drv_data->irq, drv_data);
exit_unmap_regs:
+#if defined(CONFIG_HAVE_CLK)
+ /* Not all platforms have a clk */
+ if (!IS_ERR(drv_data->clk)) {
+ clk_disable(drv_data->clk);
+ clk_unprepare(drv_data->clk);
+ }
+#endif
mv64xxx_i2c_unmap_regs(drv_data);
exit_kfree:
kfree(drv_data);
@@ -597,17 +706,31 @@ mv64xxx_i2c_remove(struct platform_device *dev)
rc = i2c_del_adapter(&drv_data->adapter);
free_irq(drv_data->irq, drv_data);
mv64xxx_i2c_unmap_regs(drv_data);
+#if defined(CONFIG_HAVE_CLK)
+ /* Not all platforms have a clk */
+ if (!IS_ERR(drv_data->clk)) {
+ clk_disable(drv_data->clk);
+ clk_unprepare(drv_data->clk);
+ }
+#endif
kfree(drv_data);
return rc;
}
+static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,mv64xxx-i2c", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
+
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
.remove = __devexit_p(mv64xxx_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
+ .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table),
},
};
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 04eb441..088c5c1 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -46,6 +46,10 @@
#define MXS_I2C_CTRL0_DIRECTION 0x00010000
#define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF)
+#define MXS_I2C_TIMING0 (0x10)
+#define MXS_I2C_TIMING1 (0x20)
+#define MXS_I2C_TIMING2 (0x30)
+
#define MXS_I2C_CTRL1 (0x40)
#define MXS_I2C_CTRL1_SET (0x44)
#define MXS_I2C_CTRL1_CLR (0x48)
@@ -97,6 +101,35 @@
#define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
MXS_I2C_CTRL0_MASTER_MODE)
+struct mxs_i2c_speed_config {
+ uint32_t timing0;
+ uint32_t timing1;
+ uint32_t timing2;
+};
+
+/*
+ * Timing values for the default 24MHz clock supplied into the i2c block.
+ *
+ * The bus can operate at 95kHz or at 400kHz with the following timing
+ * register configurations. The 100kHz mode isn't present because it's
+ * values are not stated in the i.MX233/i.MX28 datasheet. The 95kHz mode
+ * shall be close enough replacement. Therefore when the bus is configured
+ * for 100kHz operation, 95kHz timing settings are actually loaded.
+ *
+ * For details, see i.MX233 [25.4.2 - 25.4.4] and i.MX28 [27.5.2 - 27.5.4].
+ */
+static const struct mxs_i2c_speed_config mxs_i2c_95kHz_config = {
+ .timing0 = 0x00780030,
+ .timing1 = 0x00800030,
+ .timing2 = 0x00300030,
+};
+
+static const struct mxs_i2c_speed_config mxs_i2c_400kHz_config = {
+ .timing0 = 0x000f0007,
+ .timing1 = 0x001f000f,
+ .timing2 = 0x00300030,
+};
+
/**
* struct mxs_i2c_dev - per device, private MXS-I2C data
*
@@ -112,11 +145,17 @@ struct mxs_i2c_dev {
struct completion cmd_complete;
u32 cmd_err;
struct i2c_adapter adapter;
+ const struct mxs_i2c_speed_config *speed;
};
static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
stmp_reset_block(i2c->regs);
+
+ writel(i2c->speed->timing0, i2c->regs + MXS_I2C_TIMING0);
+ writel(i2c->speed->timing1, i2c->regs + MXS_I2C_TIMING1);
+ writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
+
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
@@ -193,7 +232,7 @@ static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
{
- u32 data;
+ u32 uninitialized_var(data);
int i;
for (i = 0; i < len; i++) {
@@ -319,6 +358,28 @@ static const struct i2c_algorithm mxs_i2c_algo = {
.functionality = mxs_i2c_func,
};
+static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
+{
+ uint32_t speed;
+ struct device *dev = i2c->dev;
+ struct device_node *node = dev->of_node;
+ int ret;
+
+ if (!node)
+ return -EINVAL;
+
+ i2c->speed = &mxs_i2c_95kHz_config;
+ ret = of_property_read_u32(node, "clock-frequency", &speed);
+ if (ret)
+ dev_warn(dev, "No I2C speed selected, using 100kHz\n");
+ else if (speed == 400000)
+ i2c->speed = &mxs_i2c_400kHz_config;
+ else if (speed != 100000)
+ dev_warn(dev, "Unsupported I2C speed selected, using 100kHz\n");
+
+ return 0;
+}
+
static int __devinit mxs_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -358,6 +419,11 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
return err;
i2c->dev = dev;
+
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index a92440d..5e6f1ee 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -14,7 +14,8 @@
*/
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/atomic.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -23,8 +24,7 @@
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-
-#include <plat/i2c.h>
+#include <linux/platform_data/i2c-nomadik.h>
#define DRIVER_NAME "nmk-i2c"
@@ -136,7 +136,7 @@ struct i2c_nmk_client {
/**
* struct nmk_i2c_dev - private data structure of the controller.
- * @pdev: parent platform device.
+ * @adev: parent amba device.
* @adap: corresponding I2C adapter.
* @irq: interrupt line for the controller.
* @virtbase: virtual io memory area.
@@ -150,7 +150,7 @@ struct i2c_nmk_client {
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
- struct platform_device *pdev;
+ struct amba_device *adev;
struct i2c_adapter adap;
int irq;
void __iomem *virtbase;
@@ -217,7 +217,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
}
}
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"flushing operation timed out giving up after %d attempts",
LOOP_ATTEMPTS);
@@ -276,15 +276,32 @@ exit:
/**
* load_i2c_mcr_reg() - load the MCR register
* @dev: private data of controller
+ * @flags: message flags
*/
-static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev)
+static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
{
u32 mcr = 0;
+ unsigned short slave_adr_3msb_bits;
- /* 7-bit address transaction */
- mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
+ if (unlikely(flags & I2C_M_TEN)) {
+ /* 10-bit address transaction */
+ mcr |= GEN_MASK(2, I2C_MCR_AM, 12);
+ /*
+ * Get the top 3 bits.
+ * EA10 represents extended address in MCR. This includes
+ * the extension (MSB bits) of the 7 bit address loaded
+ * in A7
+ */
+ slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7;
+
+ mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8);
+ } else {
+ /* 7-bit address transaction */
+ mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
+ }
+
/* start byte procedure not applied */
mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
@@ -364,7 +381,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* and high speed (up to 3.4 Mb/s)
*/
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
@@ -381,19 +398,20 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
/**
* read_i2c() - Read from I2C client device
* @dev: private data of I2C Driver
+ * @flags: message flags
*
* This function reads from i2c client device when controller is in
* master mode. There is a completion timeout. If there is no transfer
* before timeout error is returned.
*/
-static int read_i2c(struct nmk_i2c_dev *dev)
+static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
{
u32 status = 0;
u32 mcr;
u32 irq_mask = 0;
int timeout;
- mcr = load_i2c_mcr_reg(dev);
+ mcr = load_i2c_mcr_reg(dev, flags);
writel(mcr, dev->virtbase + I2C_MCR);
/* load the current CR value */
@@ -423,7 +441,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
@@ -431,7 +449,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n",
+ dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -459,17 +477,18 @@ static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
/**
* write_i2c() - Write data to I2C client.
* @dev: private data of I2C Driver
+ * @flags: message flags
*
* This function writes data to I2C client
*/
-static int write_i2c(struct nmk_i2c_dev *dev)
+static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
{
u32 status = 0;
u32 mcr;
u32 irq_mask = 0;
int timeout;
- mcr = load_i2c_mcr_reg(dev);
+ mcr = load_i2c_mcr_reg(dev, flags);
writel(mcr, dev->virtbase + I2C_MCR);
@@ -510,7 +529,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
@@ -518,7 +537,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n",
+ dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -538,11 +557,11 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (flags & I2C_M_RD) {
/* read operation */
dev->cli.operation = I2C_READ;
- status = read_i2c(dev);
+ status = read_i2c(dev, flags);
} else {
/* write operation */
dev->cli.operation = I2C_WRITE;
- status = write_i2c(dev);
+ status = write_i2c(dev, flags);
}
if (status || (dev->result)) {
@@ -557,7 +576,7 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
- dev_err(&dev->pdev->dev, "%s\n",
+ dev_err(&dev->adev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
@@ -630,7 +649,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (dev->regulator)
regulator_enable(dev->regulator);
- pm_runtime_get_sync(&dev->pdev->dev);
+ pm_runtime_get_sync(&dev->adev->dev);
clk_enable(dev->clk);
@@ -644,13 +663,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
setup_i2c_controller(dev);
for (i = 0; i < num_msgs; i++) {
- if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev,
- "10 bit addressing not supported\n");
-
- status = -EINVAL;
- goto out;
- }
dev->cli.slave_adr = msgs[i].addr;
dev->cli.buffer = msgs[i].buf;
dev->cli.count = msgs[i].len;
@@ -667,7 +679,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
out:
clk_disable(dev->clk);
- pm_runtime_put_sync(&dev->pdev->dev);
+ pm_runtime_put_sync(&dev->adev->dev);
if (dev->regulator)
regulator_disable(dev->regulator);
@@ -790,7 +802,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
if (dev->cli.count) {
dev->result = -EIO;
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"%lu bytes still remain to be xfered\n",
dev->cli.count);
(void) init_hw(dev);
@@ -834,7 +846,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
dev->result = -EIO;
(void) init_hw(dev);
- dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
+ dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
complete(&dev->xfer_complete);
break;
@@ -847,10 +859,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
case I2C_IT_RFSE:
case I2C_IT_WTSR:
case I2C_IT_STD:
- dev_err(&dev->pdev->dev, "unhandled Interrupt\n");
+ dev_err(&dev->adev->dev, "unhandled Interrupt\n");
break;
default:
- dev_err(&dev->pdev->dev, "spurious Interrupt..\n");
+ dev_err(&dev->adev->dev, "spurious Interrupt..\n");
break;
}
@@ -861,8 +873,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
#ifdef CONFIG_PM
static int nmk_i2c_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
+ struct amba_device *adev = to_amba_device(dev);
+ struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
if (nmk_i2c->busy)
return -EBUSY;
@@ -891,7 +903,7 @@ static const struct dev_pm_ops nmk_i2c_pm = {
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
static const struct i2c_algorithm nmk_i2c_algo = {
@@ -899,78 +911,69 @@ static const struct i2c_algorithm nmk_i2c_algo = {
.functionality = nmk_i2c_functionality
};
-static int __devinit nmk_i2c_probe(struct platform_device *pdev)
+static atomic_t adapter_id = ATOMIC_INIT(0);
+
+static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
- struct resource *res;
struct nmk_i2c_controller *pdata =
- pdev->dev.platform_data;
+ adev->dev.platform_data;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
+ if (!pdata) {
+ dev_warn(&adev->dev, "no platform data\n");
+ return -ENODEV;
+ }
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
- dev_err(&pdev->dev, "cannot allocate memory\n");
+ dev_err(&adev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto err_no_mem;
}
dev->busy = false;
- dev->pdev = pdev;
- platform_set_drvdata(pdev, dev);
+ dev->adev = adev;
+ amba_set_drvdata(adev, dev);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto err_no_resource;
- }
-
- if (request_mem_region(res->start, resource_size(res),
- DRIVER_NAME "I/O region") == NULL) {
- ret = -EBUSY;
- goto err_no_region;
- }
-
- dev->virtbase = ioremap(res->start, resource_size(res));
+ dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
if (!dev->virtbase) {
ret = -ENOMEM;
goto err_no_ioremap;
}
- dev->irq = platform_get_irq(pdev, 0);
+ dev->irq = adev->irq[0];
ret = request_irq(dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
- dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
+ dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
goto err_irq;
}
- dev->regulator = regulator_get(&pdev->dev, "v-i2c");
+ dev->regulator = regulator_get(&adev->dev, "v-i2c");
if (IS_ERR(dev->regulator)) {
- dev_warn(&pdev->dev, "could not get i2c regulator\n");
+ dev_warn(&adev->dev, "could not get i2c regulator\n");
dev->regulator = NULL;
}
- pm_suspend_ignore_children(&pdev->dev, true);
- pm_runtime_enable(&pdev->dev);
+ pm_suspend_ignore_children(&adev->dev, true);
- dev->clk = clk_get(&pdev->dev, NULL);
+ dev->clk = clk_get(&adev->dev, NULL);
if (IS_ERR(dev->clk)) {
- dev_err(&pdev->dev, "could not get i2c clock\n");
+ dev_err(&adev->dev, "could not get i2c clock\n");
ret = PTR_ERR(dev->clk);
goto err_no_clk;
}
adap = &dev->adap;
- adap->dev.parent = &pdev->dev;
+ adap->dev.parent = &adev->dev;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
adap->timeout = msecs_to_jiffies(pdata->timeout);
+ adap->nr = atomic_read(&adapter_id);
snprintf(adap->name, sizeof(adap->name),
- "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
-
- /* fetch the controller id */
- adap->nr = pdev->id;
+ "Nomadik I2C%d at %pR", adap->nr, &adev->res);
+ atomic_inc(&adapter_id);
/* fetch the controller configuration from machine */
dev->cfg.clk_freq = pdata->clk_freq;
@@ -981,16 +984,18 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, dev);
- dev_info(&pdev->dev,
+ dev_info(&adev->dev,
"initialize %s on virtual base %p\n",
adap->name, dev->virtbase);
ret = i2c_add_numbered_adapter(adap);
if (ret) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ dev_err(&adev->dev, "failed to add adapter\n");
goto err_add_adap;
}
+ pm_runtime_put(&adev->dev);
+
return 0;
err_add_adap:
@@ -998,25 +1003,21 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
err_no_clk:
if (dev->regulator)
regulator_put(dev->regulator);
- pm_runtime_disable(&pdev->dev);
free_irq(dev->irq, dev);
err_irq:
iounmap(dev->virtbase);
err_no_ioremap:
- release_mem_region(res->start, resource_size(res));
- err_no_region:
- platform_set_drvdata(pdev, NULL);
- err_no_resource:
+ amba_set_drvdata(adev, NULL);
kfree(dev);
err_no_mem:
return ret;
}
-static int __devexit nmk_i2c_remove(struct platform_device *pdev)
+static int nmk_i2c_remove(struct amba_device *adev)
{
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *res = &adev->res;
+ struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
i2c_del_adapter(&dev->adap);
flush_i2c_fifo(dev);
@@ -1031,31 +1032,46 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
clk_put(dev->clk);
if (dev->regulator)
regulator_put(dev->regulator);
- pm_runtime_disable(&pdev->dev);
- platform_set_drvdata(pdev, NULL);
+ pm_runtime_disable(&adev->dev);
+ amba_set_drvdata(adev, NULL);
kfree(dev);
return 0;
}
-static struct platform_driver nmk_i2c_driver = {
- .driver = {
+static struct amba_id nmk_i2c_ids[] = {
+ {
+ .id = 0x00180024,
+ .mask = 0x00ffffff,
+ },
+ {
+ .id = 0x00380024,
+ .mask = 0x00ffffff,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(amba, nmk_i2c_ids);
+
+static struct amba_driver nmk_i2c_driver = {
+ .drv = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.pm = &nmk_i2c_pm,
},
+ .id_table = nmk_i2c_ids,
.probe = nmk_i2c_probe,
- .remove = __devexit_p(nmk_i2c_remove),
+ .remove = nmk_i2c_remove,
};
static int __init nmk_i2c_init(void)
{
- return platform_driver_register(&nmk_i2c_driver);
+ return amba_driver_register(&nmk_i2c_driver);
}
static void __exit nmk_i2c_exit(void)
{
- platform_driver_unregister(&nmk_i2c_driver);
+ amba_driver_unregister(&nmk_i2c_driver);
}
subsys_initcall(nmk_i2c_init);
@@ -1064,4 +1080,3 @@ module_exit(nmk_i2c_exit);
MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 75194c5..bffd550 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -10,40 +10,9 @@
*/
/*
- * Device tree configuration:
- *
- * Required properties:
- * - compatible : "opencores,i2c-ocores"
- * - reg : bus address start and address range size of device
- * - interrupts : interrupt number
- * - regstep : size of device registers in bytes
- * - clock-frequency : frequency of bus clock in Hz
- *
- * Example:
- *
- * i2c0: ocores@a0000000 {
- * compatible = "opencores,i2c-ocores";
- * reg = <0xa0000000 0x8>;
- * interrupts = <10>;
- *
- * regstep = <1>;
- * clock-frequency = <20000000>;
- *
- * -- Devices connected on this I2C bus get
- * -- defined here; address- and size-cells
- * -- apply to these child devices
- *
- * #address-cells = <1>;
- * #size-cells = <0>;
- *
- * dummy@60 {
- * compatible = "dummy";
- * reg = <60>;
- * };
- * };
- *
+ * This driver can be used from the device tree, see
+ * Documentation/devicetree/bindings/i2c/ocore-i2c.txt
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -56,10 +25,12 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of_i2c.h>
+#include <linux/log2.h>
struct ocores_i2c {
void __iomem *base;
- int regstep;
+ u32 reg_shift;
+ u32 reg_io_width;
wait_queue_head_t wait;
struct i2c_adapter adap;
struct i2c_msg *msg;
@@ -102,12 +73,22 @@ struct ocores_i2c {
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
- iowrite8(value, i2c->base + reg * i2c->regstep);
+ if (i2c->reg_io_width == 4)
+ iowrite32(value, i2c->base + (reg << i2c->reg_shift));
+ else if (i2c->reg_io_width == 2)
+ iowrite16(value, i2c->base + (reg << i2c->reg_shift));
+ else
+ iowrite8(value, i2c->base + (reg << i2c->reg_shift));
}
static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
{
- return ioread8(i2c->base + reg * i2c->regstep);
+ if (i2c->reg_io_width == 4)
+ return ioread32(i2c->base + (reg << i2c->reg_shift));
+ else if (i2c->reg_io_width == 2)
+ return ioread16(i2c->base + (reg << i2c->reg_shift));
+ else
+ return ioread8(i2c->base + (reg << i2c->reg_shift));
}
static void ocores_process(struct ocores_i2c *i2c)
@@ -247,26 +228,35 @@ static struct i2c_adapter ocores_adapter = {
};
#ifdef CONFIG_OF
-static int ocores_i2c_of_probe(struct platform_device* pdev,
- struct ocores_i2c* i2c)
+static int ocores_i2c_of_probe(struct platform_device *pdev,
+ struct ocores_i2c *i2c)
{
- const __be32* val;
-
- val = of_get_property(pdev->dev.of_node, "regstep", NULL);
- if (!val) {
- dev_err(&pdev->dev, "Missing required parameter 'regstep'");
- return -ENODEV;
+ struct device_node *np = pdev->dev.of_node;
+ u32 val;
+
+ if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) {
+ /* no 'reg-shift', check for deprecated 'regstep' */
+ if (!of_property_read_u32(np, "regstep", &val)) {
+ if (!is_power_of_2(val)) {
+ dev_err(&pdev->dev, "invalid regstep %d\n",
+ val);
+ return -EINVAL;
+ }
+ i2c->reg_shift = ilog2(val);
+ dev_warn(&pdev->dev,
+ "regstep property deprecated, use reg-shift\n");
+ }
}
- i2c->regstep = be32_to_cpup(val);
- val = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
- if (!val) {
+ if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev,
- "Missing required parameter 'clock-frequency'");
+ "Missing required parameter 'clock-frequency'\n");
return -ENODEV;
}
- i2c->clock_khz = be32_to_cpup(val) / 1000;
+ i2c->clock_khz = val / 1000;
+ of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+ &i2c->reg_io_width);
return 0;
}
#else
@@ -308,7 +298,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (pdata) {
- i2c->regstep = pdata->regstep;
+ i2c->reg_shift = pdata->reg_shift;
+ i2c->reg_io_width = pdata->reg_io_width;
i2c->clock_khz = pdata->clock_khz;
} else {
ret = ocores_i2c_of_probe(pdev, i2c);
@@ -316,6 +307,9 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
return ret;
}
+ if (i2c->reg_io_width == 0)
+ i2c->reg_io_width = 1; /* Set to default value */
+
ocores_init(i2c);
init_waitqueue_head(&i2c->wait);
@@ -351,7 +345,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
return 0;
}
-static int __devexit ocores_i2c_remove(struct platform_device* pdev)
+static int __devexit ocores_i2c_remove(struct platform_device *pdev)
{
struct ocores_i2c *i2c = platform_get_drvdata(pdev);
@@ -367,9 +361,9 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev)
}
#ifdef CONFIG_PM
-static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+static int ocores_i2c_suspend(struct device *dev)
{
- struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+ struct ocores_i2c *i2c = dev_get_drvdata(dev);
u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
/* make sure the device is disabled */
@@ -378,17 +372,19 @@ static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
-static int ocores_i2c_resume(struct platform_device *pdev)
+static int ocores_i2c_resume(struct device *dev)
{
- struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+ struct ocores_i2c *i2c = dev_get_drvdata(dev);
ocores_init(i2c);
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume);
+#define OCORES_I2C_PM (&ocores_i2c_pm)
#else
-#define ocores_i2c_suspend NULL
-#define ocores_i2c_resume NULL
+#define OCORES_I2C_PM NULL
#endif
static struct of_device_id ocores_i2c_match[] = {
@@ -400,12 +396,11 @@ MODULE_DEVICE_TABLE(of, ocores_i2c_match);
static struct platform_driver ocores_i2c_driver = {
.probe = ocores_i2c_probe,
.remove = __devexit_p(ocores_i2c_remove),
- .suspend = ocores_i2c_suspend,
- .resume = ocores_i2c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "ocores-i2c",
.of_match_table = ocores_i2c_match,
+ .pm = OCORES_I2C_PM,
},
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c214833..6849635 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -49,8 +49,8 @@
/* I2C controller revisions present on specific hardware */
#define OMAP_I2C_REV_ON_2430 0x36
-#define OMAP_I2C_REV_ON_3430 0x3C
-#define OMAP_I2C_REV_ON_3530_4430 0x40
+#define OMAP_I2C_REV_ON_3430_3530 0x3C
+#define OMAP_I2C_REV_ON_3630_4430 0x40
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -173,7 +173,7 @@ enum {
/* Errata definitions */
#define I2C_OMAP_ERRATA_I207 (1 << 0)
-#define I2C_OMAP3_1P153 (1 << 1)
+#define I2C_OMAP_ERRATA_I462 (1 << 1)
struct omap_i2c_dev {
struct device *dev;
@@ -269,47 +269,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
-static void omap_i2c_unidle(struct omap_i2c_dev *dev)
-{
- if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
- omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
- omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
- omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
- omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
- }
-
- /*
- * Don't write to this register if the IE state is 0 as it can
- * cause deadlock.
- */
- if (dev->iestate)
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
-}
-
-static void omap_i2c_idle(struct omap_i2c_dev *dev)
-{
- u16 iv;
-
- dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
- omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
- else
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
-
- if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
- iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
- } else {
- omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
-
- /* Flush posted write */
- omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
- }
-}
-
static int omap_i2c_init(struct omap_i2c_dev *dev)
{
u16 psc = 0, scll = 0, sclh = 0, buf = 0;
@@ -346,7 +305,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
SYSC_AUTOIDLE_MASK);
- } else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+ } else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
dev->syscstate = SYSC_AUTOIDLE_MASK;
dev->syscstate |= SYSC_ENAWAKEUP_MASK;
dev->syscstate |= (SYSC_IDLEMODE_SMART <<
@@ -468,11 +427,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
/* Take the I2C module out of reset: */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
- dev->errata = 0;
-
- if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
- dev->errata |= I2C_OMAP_ERRATA_I207;
-
/* Enable interrupts */
dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -514,7 +468,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
struct i2c_msg *msg, int stop)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
- int r;
+ unsigned long timeout;
u16 w;
dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
@@ -536,7 +490,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
- init_completion(&dev->cmd_complete);
+ INIT_COMPLETION(dev->cmd_complete);
dev->cmd_err = 0;
w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
@@ -584,12 +538,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
* REVISIT: We should abort the transfer on signals, but the bus goes
* into arbitration and we're currently unable to recover from it.
*/
- r = wait_for_completion_timeout(&dev->cmd_complete,
- OMAP_I2C_TIMEOUT);
+ timeout = wait_for_completion_timeout(&dev->cmd_complete,
+ OMAP_I2C_TIMEOUT);
dev->buf_len = 0;
- if (r < 0)
- return r;
- if (r == 0) {
+ if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
return -ETIMEDOUT;
@@ -630,7 +582,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int r;
- pm_runtime_get_sync(dev->dev);
+ r = pm_runtime_get_sync(dev->dev);
+ if (IS_ERR_VALUE(r))
+ return r;
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
@@ -767,11 +721,11 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
#endif
/*
- * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
+ * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
* data to DATA_REG. Otherwise some data bytes can be lost while transferring
* them from the memory to the I2C interface.
*/
-static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
+static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err)
{
unsigned long timeout = 10000;
@@ -779,7 +733,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
OMAP_I2C_STAT_XDR));
- *err |= OMAP_I2C_STAT_XUDF;
return -ETIMEDOUT;
}
@@ -792,6 +745,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
return 0;
}
+ *err |= OMAP_I2C_STAT_XUDF;
return 0;
}
@@ -930,8 +884,8 @@ complete:
break;
}
- if ((dev->errata & I2C_OMAP3_1P153) &&
- errata_omap3_1p153(dev, &stat, &err))
+ if ((dev->errata & I2C_OMAP_ERRATA_I462) &&
+ errata_omap3_i462(dev, &stat, &err))
goto complete;
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
@@ -1048,6 +1002,7 @@ omap_i2c_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, dev);
+ init_completion(&dev->cmd_complete);
dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
@@ -1057,12 +1012,19 @@ omap_i2c_probe(struct platform_device *pdev)
dev->regs = (u8 *)reg_map_ip_v1;
pm_runtime_enable(dev->dev);
- pm_runtime_get_sync(dev->dev);
+ r = pm_runtime_get_sync(dev->dev);
+ if (IS_ERR_VALUE(r))
+ goto err_free_mem;
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
- if (dev->rev <= OMAP_I2C_REV_ON_3430)
- dev->errata |= I2C_OMAP3_1P153;
+ dev->errata = 0;
+
+ if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+ dev->errata |= I2C_OMAP_ERRATA_I207;
+
+ if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
+ dev->errata |= I2C_OMAP_ERRATA_I462;
if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
@@ -1079,7 +1041,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->fifo_size = (dev->fifo_size / 2);
- if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
+ if (dev->rev >= OMAP_I2C_REV_ON_3630_4430)
dev->b_hw = 0; /* Disable hardware fixes */
else
dev->b_hw = 1; /* Enable hardware fixes */
@@ -1095,7 +1057,7 @@ omap_i2c_probe(struct platform_device *pdev)
isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
omap_i2c_isr;
- r = request_irq(dev->irq, isr, 0, pdev->name, dev);
+ r = request_irq(dev->irq, isr, IRQF_NO_SUSPEND, pdev->name, dev);
if (r) {
dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
@@ -1105,8 +1067,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
- pm_runtime_put(dev->dev);
-
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -1126,6 +1086,8 @@ omap_i2c_probe(struct platform_device *pdev)
of_i2c_register_devices(adap);
+ pm_runtime_put(dev->dev);
+
return 0;
err_free_irq:
@@ -1134,6 +1096,7 @@ err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
pm_runtime_put(dev->dev);
iounmap(dev->base);
+ pm_runtime_disable(&pdev->dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
kfree(dev);
@@ -1143,17 +1106,23 @@ err_release_region:
return r;
}
-static int
-omap_i2c_remove(struct platform_device *pdev)
+static int __devexit omap_i2c_remove(struct platform_device *pdev)
{
struct omap_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *mem;
+ int ret;
platform_set_drvdata(pdev, NULL);
free_irq(dev->irq, dev);
i2c_del_adapter(&dev->adapter);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1161,13 +1130,26 @@ omap_i2c_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
#ifdef CONFIG_PM_RUNTIME
static int omap_i2c_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+ u16 iv;
+
+ _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
+
+ omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
- omap_i2c_idle(_dev);
+ if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
+ iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
+ } else {
+ omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate);
+
+ /* Flush posted write */
+ omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG);
+ }
return 0;
}
@@ -1177,23 +1159,40 @@ static int omap_i2c_runtime_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
- omap_i2c_unidle(_dev);
+ if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+ omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
+ omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
+ omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+ }
+
+ /*
+ * Don't write to this register if the IE state is 0 as it can
+ * cause deadlock.
+ */
+ if (_dev->iestate)
+ omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
return 0;
}
+#endif /* CONFIG_PM_RUNTIME */
static struct dev_pm_ops omap_i2c_pm_ops = {
- .runtime_suspend = omap_i2c_runtime_suspend,
- .runtime_resume = omap_i2c_runtime_resume,
+ SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
+ omap_i2c_runtime_resume, NULL)
};
#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
#else
#define OMAP_I2C_PM_OPS NULL
-#endif
+#endif /* CONFIG_PM */
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
- .remove = omap_i2c_remove,
+ .remove = __devexit_p(omap_i2c_remove),
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 99389d2..5d54416 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -587,25 +587,27 @@ static struct i2c_algorithm pnx_algorithm = {
};
#ifdef CONFIG_PM
-static int i2c_pnx_controller_suspend(struct platform_device *pdev,
- pm_message_t state)
+static int i2c_pnx_controller_suspend(struct device *dev)
{
- struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+ struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
clk_disable(alg_data->clk);
return 0;
}
-static int i2c_pnx_controller_resume(struct platform_device *pdev)
+static int i2c_pnx_controller_resume(struct device *dev)
{
- struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+ struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
return clk_enable(alg_data->clk);
}
+
+static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
+ i2c_pnx_controller_suspend, i2c_pnx_controller_resume);
+#define PNX_I2C_PM (&i2c_pnx_pm)
#else
-#define i2c_pnx_controller_suspend NULL
-#define i2c_pnx_controller_resume NULL
+#define PNX_I2C_PM NULL
#endif
static int __devinit i2c_pnx_probe(struct platform_device *pdev)
@@ -783,11 +785,10 @@ static struct platform_driver i2c_pnx_driver = {
.name = "pnx-i2c",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(i2c_pnx_of_match),
+ .pm = PNX_I2C_PM,
},
.probe = i2c_pnx_probe,
.remove = __devexit_p(i2c_pnx_remove),
- .suspend = i2c_pnx_controller_suspend,
- .resume = i2c_pnx_controller_resume,
};
static int __init i2c_adap_pnx_init(void)
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 93709fb..d8515be 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -254,7 +254,7 @@ static int __devexit puv3_i2c_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
+static int puv3_i2c_suspend(struct device *dev)
{
int poll_count;
/* Disable the IIC */
@@ -267,23 +267,20 @@ static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
return 0;
}
-static int puv3_i2c_resume(struct platform_device *dev)
-{
- return 0 ;
-}
+static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL);
+#define PUV3_I2C_PM (&puv3_i2c_pm)
+
#else
-#define puv3_i2c_suspend NULL
-#define puv3_i2c_resume NULL
+#define PUV3_I2C_PM NULL
#endif
static struct platform_driver puv3_i2c_driver = {
.probe = puv3_i2c_probe,
.remove = __devexit_p(puv3_i2c_remove),
- .suspend = puv3_i2c_suspend,
- .resume = puv3_i2c_resume,
.driver = {
.name = "PKUnity-v3-I2C",
.owner = THIS_MODULE,
+ .pm = PUV3_I2C_PM,
}
};
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 0195915..5ae3b02 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -122,7 +122,7 @@ static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pde
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
- match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
+ match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
return (unsigned int)match->data;
}
@@ -609,7 +609,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
if (ret != -EAGAIN) {
clk_disable(i2c->clk);
- pm_runtime_put_sync(&adap->dev);
+ pm_runtime_put(&adap->dev);
return ret;
}
@@ -619,7 +619,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
}
clk_disable(i2c->clk);
- pm_runtime_put_sync(&adap->dev);
+ pm_runtime_put(&adap->dev);
return -EREMOTEIO;
}
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 4d44af1..580a0c0 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* ST DDC I2C master mode driver, used in e.g. U300 series platforms.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -139,8 +139,6 @@ module_param(scl_frequency, uint, 0644);
* struct stu300_dev - the stu300 driver state holder
* @pdev: parent platform device
* @adapter: corresponding I2C adapter
- * @phybase: location of I/O area in memory
- * @physize: size of I/O area in memory
* @clk: hardware block clock
* @irq: assigned interrupt line
* @cmd_issue_lock: this locks the following cmd_ variables
@@ -155,8 +153,6 @@ module_param(scl_frequency, uint, 0644);
struct stu300_dev {
struct platform_device *pdev;
struct i2c_adapter adapter;
- resource_size_t phybase;
- resource_size_t physize;
void __iomem *virtbase;
struct clk *clk;
int irq;
@@ -873,64 +869,44 @@ stu300_probe(struct platform_device *pdev)
int ret = 0;
char clk_name[] = "I2C0";
- dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev, "could not allocate device struct\n");
- ret = -ENOMEM;
- goto err_no_devmem;
+ return -ENOMEM;
}
bus_nr = pdev->id;
clk_name[3] += (char)bus_nr;
- dev->clk = clk_get(&pdev->dev, clk_name);
+ dev->clk = devm_clk_get(&pdev->dev, clk_name);
if (IS_ERR(dev->clk)) {
- ret = PTR_ERR(dev->clk);
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
- goto err_no_clk;
+ return PTR_ERR(dev->clk);
}
dev->pdev = pdev;
- platform_set_drvdata(pdev, dev);
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto err_no_resource;
- }
-
- dev->phybase = res->start;
- dev->physize = resource_size(res);
-
- if (request_mem_region(dev->phybase, dev->physize,
- NAME " I/O Area") == NULL) {
- ret = -EBUSY;
- goto err_no_ioregion;
- }
+ if (!res)
+ return -ENOENT;
- dev->virtbase = ioremap(dev->phybase, dev->physize);
+ dev->virtbase = devm_request_and_ioremap(&pdev->dev, res);
dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
"base %p\n", bus_nr, dev->virtbase);
- if (!dev->virtbase) {
- ret = -ENOMEM;
- goto err_no_ioremap;
- }
+ if (!dev->virtbase)
+ return -ENOMEM;
dev->irq = platform_get_irq(pdev, 0);
- if (request_irq(dev->irq, stu300_irh, 0,
- NAME, dev)) {
- ret = -EIO;
- goto err_no_irq;
- }
+ ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev);
+ if (ret < 0)
+ return ret;
dev->speed = scl_frequency;
- clk_enable(dev->clk);
+ clk_prepare_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
-
if (ret != 0) {
dev_err(&dev->pdev->dev, "error initializing hardware.\n");
- goto err_init_hw;
+ return -EIO;
}
/* IRQ event handling initialization */
@@ -952,57 +928,43 @@ stu300_probe(struct platform_device *pdev)
/* i2c device drivers may be active on return from add_adapter() */
ret = i2c_add_numbered_adapter(adap);
if (ret) {
- dev_err(&dev->pdev->dev, "failure adding ST Micro DDC "
+ dev_err(&pdev->dev, "failure adding ST Micro DDC "
"I2C adapter\n");
- goto err_add_adapter;
+ return ret;
}
- return 0;
- err_add_adapter:
- err_init_hw:
- free_irq(dev->irq, dev);
- err_no_irq:
- iounmap(dev->virtbase);
- err_no_ioremap:
- release_mem_region(dev->phybase, dev->physize);
- err_no_ioregion:
- platform_set_drvdata(pdev, NULL);
- err_no_resource:
- clk_put(dev->clk);
- err_no_clk:
- kfree(dev);
- err_no_devmem:
- dev_err(&pdev->dev, "failed to add " NAME " adapter: %d\n",
- pdev->id);
- return ret;
+ platform_set_drvdata(pdev, dev);
+ return 0;
}
#ifdef CONFIG_PM
-static int stu300_suspend(struct platform_device *pdev, pm_message_t state)
+static int stu300_suspend(struct device *device)
{
- struct stu300_dev *dev = platform_get_drvdata(pdev);
+ struct stu300_dev *dev = dev_get_drvdata(device);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
return 0;
}
-static int stu300_resume(struct platform_device *pdev)
+static int stu300_resume(struct device *device)
{
int ret = 0;
- struct stu300_dev *dev = platform_get_drvdata(pdev);
+ struct stu300_dev *dev = dev_get_drvdata(device);
clk_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
if (ret != 0)
- dev_err(&pdev->dev, "error re-initializing hardware.\n");
+ dev_err(device, "error re-initializing hardware.\n");
return ret;
}
+
+static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
+#define STU300_I2C_PM (&stu300_pm)
#else
-#define stu300_suspend NULL
-#define stu300_resume NULL
+#define STU300_I2C_PM NULL
#endif
static int __exit
@@ -1013,12 +975,7 @@ stu300_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
- free_irq(dev->irq, dev);
- iounmap(dev->virtbase);
- release_mem_region(dev->phybase, dev->physize);
- clk_put(dev->clk);
platform_set_drvdata(pdev, NULL);
- kfree(dev);
return 0;
}
@@ -1026,10 +983,9 @@ static struct platform_driver stu300_i2c_driver = {
.driver = {
.name = NAME,
.owner = THIS_MODULE,
+ .pm = STU300_I2C_PM,
},
.remove = __exit_p(stu300_remove),
- .suspend = stu300_suspend,
- .resume = stu300_resume,
};
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3da7ee3..66eb53f 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -97,8 +97,21 @@
#define I2C_HEADER_10BIT_ADDR (1<<18)
#define I2C_HEADER_IE_ENABLE (1<<17)
#define I2C_HEADER_REPEAT_START (1<<16)
+#define I2C_HEADER_CONTINUE_XFER (1<<15)
#define I2C_HEADER_MASTER_ADDR_SHIFT 12
#define I2C_HEADER_SLAVE_ADDR_SHIFT 1
+/*
+ * msg_end_type: The bus control which need to be send at end of transfer.
+ * @MSG_END_STOP: Send stop pulse at end of transfer.
+ * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
+ * @MSG_END_CONTINUE: The following on message is coming and so do not send
+ * stop or repeat start.
+ */
+enum msg_end_type {
+ MSG_END_STOP,
+ MSG_END_REPEAT_START,
+ MSG_END_CONTINUE,
+};
/**
* struct tegra_i2c_dev - per device i2c context
@@ -106,7 +119,6 @@
* @adapter: core i2c layer adapter information
* @clk: clock reference for i2c controller
* @i2c_clk: clock reference for i2c bus
- * @iomem: memory resource for registers
* @base: ioremapped registers cookie
* @cont_id: i2c controller id, used for for packet header
* @irq: irq number of transfer complete interrupt
@@ -124,7 +136,6 @@ struct tegra_i2c_dev {
struct i2c_adapter adapter;
struct clk *clk;
struct clk *i2c_clk;
- struct resource *iomem;
void __iomem *base;
int cont_id;
int irq;
@@ -165,6 +176,10 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+
+ /* Read back register to make sure that register writes completed */
+ if (reg != I2C_TX_FIFO)
+ readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
}
static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
@@ -449,7 +464,7 @@ err:
}
static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
- struct i2c_msg *msg, int stop)
+ struct i2c_msg *msg, enum msg_end_type end_state)
{
u32 packet_header;
u32 int_mask;
@@ -476,7 +491,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
packet_header = I2C_HEADER_IE_ENABLE;
- if (!stop)
+ if (end_state == MSG_END_CONTINUE)
+ packet_header |= I2C_HEADER_CONTINUE_XFER;
+ else if (end_state == MSG_END_REPEAT_START)
packet_header |= I2C_HEADER_REPEAT_START;
if (msg->flags & I2C_M_TEN) {
packet_header |= msg->addr;
@@ -548,8 +565,14 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
clk_prepare_enable(i2c_dev->clk);
for (i = 0; i < num; i++) {
- int stop = (i == (num - 1)) ? 1 : 0;
- ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop);
+ enum msg_end_type end_type = MSG_END_STOP;
+ if (i < (num - 1)) {
+ if (msgs[i + 1].flags & I2C_M_NOSTART)
+ end_type = MSG_END_CONTINUE;
+ else
+ end_type = MSG_END_REPEAT_START;
+ }
+ ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
if (ret)
break;
}
@@ -559,7 +582,8 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
}
static const struct i2c_algorithm tegra_i2c_algo = {
@@ -572,7 +596,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
struct tegra_i2c_dev *i2c_dev;
struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
- struct resource *iomem;
struct clk *clk;
struct clk *i2c_clk;
const unsigned int *prop;
@@ -585,50 +608,41 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no mem resource\n");
return -EINVAL;
}
- iomem = request_mem_region(res->start, resource_size(res), pdev->name);
- if (!iomem) {
- dev_err(&pdev->dev, "I2C region already claimed\n");
- return -EBUSY;
- }
- base = ioremap(iomem->start, resource_size(iomem));
+ base = devm_request_and_ioremap(&pdev->dev, res);
if (!base) {
- dev_err(&pdev->dev, "Cannot ioremap I2C region\n");
- return -ENOMEM;
+ dev_err(&pdev->dev, "Cannot request/ioremap I2C registers\n");
+ return -EADDRNOTAVAIL;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev, "no irq resource\n");
- ret = -EINVAL;
- goto err_iounmap;
+ return -EINVAL;
}
irq = res->start;
- clk = clk_get(&pdev->dev, NULL);
+ clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "missing controller clock");
- ret = PTR_ERR(clk);
- goto err_release_region;
+ return PTR_ERR(clk);
}
- i2c_clk = clk_get(&pdev->dev, "i2c");
+ i2c_clk = devm_clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c_clk)) {
dev_err(&pdev->dev, "missing bus clock");
- ret = PTR_ERR(i2c_clk);
- goto err_clk_put;
+ return PTR_ERR(i2c_clk);
}
- i2c_dev = kzalloc(sizeof(struct tegra_i2c_dev), GFP_KERNEL);
+ i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev) {
- ret = -ENOMEM;
- goto err_i2c_clk_put;
+ dev_err(&pdev->dev, "Could not allocate struct tegra_i2c_dev");
+ return -ENOMEM;
}
i2c_dev->base = base;
i2c_dev->clk = clk;
i2c_dev->i2c_clk = i2c_clk;
- i2c_dev->iomem = iomem;
i2c_dev->adapter.algo = &tegra_i2c_algo;
i2c_dev->irq = irq;
i2c_dev->cont_id = pdev->id;
@@ -657,13 +671,14 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
ret = tegra_i2c_init(i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize i2c controller");
- goto err_free;
+ return ret;
}
- ret = request_irq(i2c_dev->irq, tegra_i2c_isr, 0, pdev->name, i2c_dev);
+ ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
+ tegra_i2c_isr, 0, pdev->name, i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
- goto err_free;
+ return ret;
}
clk_prepare_enable(i2c_dev->i2c_clk);
@@ -681,45 +696,26 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
if (ret) {
dev_err(&pdev->dev, "Failed to add I2C adapter\n");
- goto err_free_irq;
+ clk_disable_unprepare(i2c_dev->i2c_clk);
+ return ret;
}
of_i2c_register_devices(&i2c_dev->adapter);
return 0;
-err_free_irq:
- free_irq(i2c_dev->irq, i2c_dev);
-err_free:
- kfree(i2c_dev);
-err_i2c_clk_put:
- clk_put(i2c_clk);
-err_clk_put:
- clk_put(clk);
-err_release_region:
- release_mem_region(iomem->start, resource_size(iomem));
-err_iounmap:
- iounmap(base);
- return ret;
}
static int __devexit tegra_i2c_remove(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adapter);
- free_irq(i2c_dev->irq, i2c_dev);
- clk_put(i2c_dev->i2c_clk);
- clk_put(i2c_dev->clk);
- release_mem_region(i2c_dev->iomem->start,
- resource_size(i2c_dev->iomem));
- iounmap(i2c_dev->base);
- kfree(i2c_dev);
return 0;
}
#ifdef CONFIG_PM
-static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+static int tegra_i2c_suspend(struct device *dev)
{
- struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+ struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
i2c_lock_adapter(&i2c_dev->adapter);
i2c_dev->is_suspended = true;
@@ -728,9 +724,9 @@ static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
-static int tegra_i2c_resume(struct platform_device *pdev)
+static int tegra_i2c_resume(struct device *dev)
{
- struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+ struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
i2c_lock_adapter(&i2c_dev->adapter);
@@ -748,6 +744,11 @@ static int tegra_i2c_resume(struct platform_device *pdev)
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
+#define TEGRA_I2C_PM (&tegra_i2c_pm)
+#else
+#define TEGRA_I2C_PM NULL
#endif
#if defined(CONFIG_OF)
@@ -758,21 +759,16 @@ static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
{},
};
MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
-#else
-#define tegra_i2c_of_match NULL
#endif
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
.remove = __devexit_p(tegra_i2c_remove),
-#ifdef CONFIG_PM
- .suspend = tegra_i2c_suspend,
- .resume = tegra_i2c_resume,
-#endif
.driver = {
.name = "tegra-i2c",
.owner = THIS_MODULE,
- .of_match_table = tegra_i2c_of_match,
+ .of_match_table = of_match_ptr(tegra_i2c_of_match),
+ .pm = TEGRA_I2C_PM,
},
};
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 0ba26fb..a447f4e 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -83,7 +83,7 @@ timberdale_xiic_platform_data = {
static __devinitdata struct ocores_i2c_platform_data
timberdale_ocores_platform_data = {
- .regstep = 4,
+ .reg_shift = 2,
.clock_khz = 62500,
.devices = timberdale_i2c_board_info,
.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 4d5e57f..1c06b5c 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -12,7 +12,8 @@
#define _LINUX_I2C_OCORES_H
struct ocores_i2c_platform_data {
- u32 regstep; /* distance between registers */
+ u32 reg_shift; /* register offset shift value */
+ u32 reg_io_width; /* register io read/write width */
u32 clock_khz; /* input clock in kHz */
u8 num_devices; /* number of devices in the devices list */
struct i2c_board_info const *devices; /* devices connected to the bus */
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/include/linux/platform_data/i2c-nomadik.h
index 8ba70ff..c2303c3 100644
--- a/arch/arm/plat-nomadik/include/plat/i2c.h
+++ b/include/linux/platform_data/i2c-nomadik.h
@@ -5,8 +5,8 @@
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_I2C_H
-#define __PLAT_I2C_H
+#ifndef __PDATA_I2C_NOMADIK_H
+#define __PDATA_I2C_NOMADIK_H
enum i2c_freq_mode {
I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
@@ -36,4 +36,4 @@ struct nmk_i2c_controller {
enum i2c_freq_mode sm;
};
-#endif /* __PLAT_I2C_H */
+#endif /* __PDATA_I2C_NOMADIK_H */
OpenPOWER on IntegriCloud