Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

80 files changed, 3793 insertions, 3248 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9442260..5098564 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -738,7 +738,6 @@ config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
 	select FIQ
-	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
@@ -767,6 +766,7 @@ config ARCH_SA1100
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
 	help
 	  Support for StrongARM 11x0 based boards.
 
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 81a933e..3bb1d75 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -35,9 +35,6 @@ config DMABOUNCE
 	bool
 	select ZONE_DMA
 
-config TIMER_ACORN
-	bool
-
 config SHARP_LOCOMO
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ea9b6f..69feafe 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
-obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 61691cd..9173d11 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -16,6 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -28,9 +29,8 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/mach-types.h>
 #include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
@@ -86,8 +86,10 @@
 #define IRQ_S1_CD_VALID		(52)
 #define IRQ_S0_BVD1_STSCHG	(53)
 #define IRQ_S1_BVD1_STSCHG	(54)
+#define SA1111_IRQ_NR		(55)
 
-extern void __init sa1110_mb_enable(void);
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
 
 /*
  * We keep the following data for the overall SA1111.  Note that the
@@ -104,6 +106,7 @@ struct sa1111 {
 	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
+	struct sa1111_platform_data *pdata;
 #ifdef CONFIG_PM
 	void		*saved_state;
 #endif
@@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111;
 struct sa1111_dev_info {
 	unsigned long	offset;
 	unsigned long	skpcr_mask;
+	bool		dma;
 	unsigned int	devid;
 	unsigned int	irq[6];
 };
@@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_USB,
 		.skpcr_mask	= SKPCR_UCLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_USB,
 		.irq = {
 			IRQ_USBPWR,
@@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= 0x0600,
 		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_SAC,
 		.irq = {
 			AUDXMTDMADONEA,
@@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_KBD,
 		.skpcr_mask	= SKPCR_PTCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_KBD,
 		.irq = {
 			IRQ_TPRXINT,
 			IRQ_TPTXINT
@@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_MSE,
 		.skpcr_mask	= SKPCR_PMCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_MSE,
 		.irq = {
 			IRQ_MSRXINT,
 			IRQ_MSTXINT
@@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = {
 	.irq_set_wake	= sa1111_wake_highirq,
 };
 
-static void sa1111_setup_irq(struct sa1111 *sachip)
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 {
 	void __iomem *irqbase = sachip->base + SA1111_INTC;
-	unsigned int irq;
+	unsigned i, irq;
+	int ret;
 
 	/*
 	 * We're guaranteed that this region hasn't been taken.
 	 */
 	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
 
+	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+			SA1111_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	sachip->irq_base = ret;
+
 	/* disable all IRQs */
 	sa1111_writel(0, irqbase + SA1111_INTEN0);
 	sa1111_writel(0, irqbase + SA1111_INTEN1);
@@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
 
-	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
+	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_low_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
+	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_high_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
@@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	irq_set_handler_data(sachip->irq, sachip);
 	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+
+	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+	return 0;
 }
 
 /*
@@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 }
 #endif
 
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-#endif
-
 static void sa1111_dev_release(struct device *_dev)
 {
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 
-	release_resource(&dev->res);
 	kfree(dev);
 }
 
@@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		      struct sa1111_dev_info *info)
 {
 	struct sa1111_dev *dev;
+	unsigned i;
 	int ret;
 
 	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
 	if (!dev) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_alloc;
 	}
 
+	device_initialize(&dev->dev);
 	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
 	dev->dev.release = sa1111_dev_release;
-	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
 	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
-
-	ret = request_resource(parent, &dev->res);
-	if (ret) {
-		printk("SA1111: failed to allocate resource for %s\n",
-			dev->res.name);
-		dev_set_name(&dev->dev, NULL);
-		kfree(dev);
-		goto out;
-	}
-
 
-	ret = device_register(&dev->dev);
-	if (ret) {
-		release_resource(&dev->res);
-		kfree(dev);
-		goto out;
-	}
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
+		dev->irq[i] = sachip->irq_base + info->irq[i];
 
-#ifdef CONFIG_DMABOUNCE
 	/*
-	 * If the parent device has a DMA mask associated with it,
-	 * propagate it down to the children.
+	 * If the parent device has a DMA mask associated with it, and
+	 * this child supports DMA, propagate it down to the children.
 	 */
-	if (sachip->dev->dma_mask) {
+	if (info->dma && sachip->dev->dma_mask) {
 		dev->dma_mask = *sachip->dev->dma_mask;
 		dev->dev.dma_mask = &dev->dma_mask;
+		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+	}
 
-		if (dev->dma_mask != 0xffffffffUL) {
-			ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret) {
-				dev_err(&dev->dev, "SA1111: Failed to register"
-					" with dmabounce\n");
-				device_unregister(&dev->dev);
-			}
-		}
+	ret = request_resource(parent, &dev->res);
+	if (ret) {
+		dev_err(sachip->dev, "failed to allocate resource for %s\n",
+			dev->res.name);
+		goto err_resource;
 	}
-#endif
 
-out:
+	ret = device_add(&dev->dev);
+	if (ret)
+		goto err_add;
+	return 0;
+
+ err_add:
+	release_resource(&dev->res);
+ err_resource:
+	put_device(&dev->dev);
+ err_alloc:
 	return ret;
 }
 
@@ -698,16 +683,21 @@ out:
  *	Returns:
  *	%-ENODEV	device not found.
  *	%-EBUSY		physical address already marked in-use.
+ *	%-EINVAL	no platform data passed
  *	%0		successful.
  */
 static int __devinit
 __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
 	unsigned long id;
 	unsigned int has_devs;
 	int i, ret = -ENODEV;
 
+	if (!pd)
+		return -EINVAL;
+
 	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
 	if (!sachip)
 		return -ENOMEM;
@@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	sachip->dev = me;
 	dev_set_drvdata(sachip->dev, sachip);
 
+	sachip->pdata = pd;
 	sachip->phys = mem->start;
 	sachip->irq = irq;
 
@@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 */
 	sa1111_wake(sachip);
 
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	if (sachip->irq != NO_IRQ) {
+		ret = sa1111_setup_irq(sachip, pd->irq_base);
+		if (ret)
+			goto err_unmap;
+	}
+
 #ifdef CONFIG_ARCH_SA1100
 	{
 	unsigned int val;
@@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	}
 #endif
 
-	/*
-	 * The interrupt controller must be initialised before any
-	 * other device to ensure that the interrupts are available.
-	 */
-	if (sachip->irq != NO_IRQ)
-		sa1111_setup_irq(sachip);
-
 	g_sa1111 = sachip;
 
 	has_devs = ~0;
-	if (machine_is_assabet() || machine_is_jornada720() ||
-	    machine_is_badge4())
-		has_devs &= ~(1 << 4);
-	else
-		has_devs &= ~(1 << 1);
+	if (pd)
+		has_devs &= ~pd->disable_devs;
 
 	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
-		if (has_devs & (1 << i))
+		if (sa1111_devices[i].devid & has_devs)
 			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
 
 	return 0;
@@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 static int sa1111_remove_one(struct device *dev, void *data)
 {
-	device_unregister(dev);
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	device_del(&sadev->dev);
+	release_resource(&sadev->res);
+	put_device(&sadev->dev);
 	return 0;
 }
 
@@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
 	if (sachip->irq != NO_IRQ) {
 		irq_set_chained_handler(sachip->irq, NULL);
 		irq_set_handler_data(sachip->irq, NULL);
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 
 		release_mem_region(sachip->phys + SA1111_INTC, 512);
 	}
@@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
 	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
 
+	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+
 	base = sachip->base + SA1111_INTC;
 	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
 	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
@@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	 */
 	val = sa1111_readl(sachip->base + SA1111_SKCR);
 	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
 
 	clk_disable(sachip->clk);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
+#ifdef CONFIG_ARCH_SA1100
+	sa1110_mb_disable();
+#endif
+
 	return 0;
 }
 
@@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev)
 	 */
 	sa1111_wake(sachip);
 
+#ifdef CONFIG_ARCH_SA1100
+	/* Enable the memory bus request/grant signals */
+	sa1110_mb_enable();
+#endif
+
 	/*
 	 * Only lock for write ops. Also, sa1111_wake must be called with
 	 * released spinlock!
@@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = {
 	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io);
  *	sa1111_enable_device - enable an on-chip SA1111 function block
  *	@sadev: SA1111 function block device to enable
  */
-void sa1111_enable_device(struct sa1111_dev *sadev)
+int sa1111_enable_device(struct sa1111_dev *sadev)
 {
 	struct sa1111 *sachip = sa1111_chip_driver(sadev);
 	unsigned long flags;
 	unsigned int val;
+	int ret = 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
-	spin_unlock_irqrestore(&sachip->lock, flags);
+	if (sachip->pdata && sachip->pdata->enable)
+		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+	if (ret == 0) {
+		spin_lock_irqsave(&sachip->lock, flags);
+		val = sa1111_readl(sachip->base + SA1111_SKPCR);
+		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		spin_unlock_irqrestore(&sachip->lock, flags);
+	}
+	return ret;
 }
 EXPORT_SYMBOL(sa1111_enable_device);
 
@@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	val = sa1111_readl(sachip->base + SA1111_SKPCR);
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	if (sachip->pdata && sachip->pdata->disable)
+		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
 }
 EXPORT_SYMBOL(sa1111_disable_device);
 
@@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
-	return dev->devid == drv->devid;
+	return dev->devid & drv->devid;
 }
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
@@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev)
 	return ret;
 }
 
+static void sa1111_bus_shutdown(struct device *dev)
+{
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+	if (drv && drv->shutdown)
+		drv->shutdown(SA1111_DEV(dev));
+}
+
 static int sa1111_bus_probe(struct device *dev)
 {
 	struct sa1111_dev *sadev = SA1111_DEV(dev);
@@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = {
 	.remove		= sa1111_bus_remove,
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
+	.shutdown	= sa1111_bus_shutdown,
 };
 EXPORT_SYMBOL(sa1111_bus_type);
 
@@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
 }
 EXPORT_SYMBOL(sa1111_driver_unregister);
 
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller.  If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+	/*
+	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+	 * User's Guide" mentions that jumpers R51 and R52 control the
+	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+	 * SDRAM bank 1 on Neponset). The default configuration selects
+	 * Assabet, so any address in bank 1 is necessarily invalid.
+	 */
+	return (machine_is_assabet() || machine_is_pfs168()) &&
+		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
+
+static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
+	void *data)
+{
+	struct sa1111_dev *dev = SA1111_DEV(data);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
+			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+					sa1111_needs_bounce);
+			if (ret)
+				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
+		}
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
+			dmabounce_unregister_dev(&dev->dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sa1111_bus_notifier = {
+	.notifier_call = sa1111_notifier_call,
+};
+#endif
+
 static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
+#ifdef CONFIG_DMABOUNCE
+	if (ret == 0)
+		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	if (ret == 0)
 		platform_driver_register(&sa1111_device_driver);
 	return ret;
@@ -1360,6 +1446,9 @@ static int __init sa1111_init(void)
 static void __exit sa1111_exit(void)
 {
 	platform_driver_unregister(&sa1111_device_driver);
+#ifdef CONFIG_DMABOUNCE
+	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	bus_unregister(&sa1111_bus_type);
 }
 
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 92ed254..7c2bbc7 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -132,34 +132,10 @@
 #define SKPCR_DCLKEN	(1<<7)
 #define SKPCR_PWMCLKEN	(1<<8)
 
-/*
- * USB Host controller
- */
+/* USB Host controller */
 #define SA1111_USB		0x0400
 
 /*
- * Offsets from SA1111_USB_BASE
- */
-#define SA1111_USB_STATUS	0x0118
-#define SA1111_USB_RESET	0x011c
-#define SA1111_USB_IRQTEST	0x0120
-
-#define USB_RESET_FORCEIFRESET	(1 << 0)
-#define USB_RESET_FORCEHCRESET	(1 << 1)
-#define USB_RESET_CLKGENRESET	(1 << 2)
-#define USB_RESET_SIMSCALEDOWN	(1 << 3)
-#define USB_RESET_USBINTTEST	(1 << 4)
-#define USB_RESET_SLEEPSTBYEN	(1 << 5)
-#define USB_RESET_PWRSENSELOW	(1 << 6)
-#define USB_RESET_PWRCTRLLOW	(1 << 7)
-
-#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
-#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
-#define USB_STATUS_NIRQHCIM       (1 <<  9)
-#define USB_STATUS_NHCIMFCLR      (1 << 10)
-#define USB_STATUS_USBPWRSENSE    (1 << 11)
-
-/*
  * Serial Audio Controller
  *
  * Registers
@@ -327,22 +303,6 @@
  *    PC_SSR		GPIO Block C Sleep State
  */
 
-#define _PA_DDR		_SA1111( 0x1000 )
-#define _PA_DRR		_SA1111( 0x1004 )
-#define _PA_DWR		_SA1111( 0x1004 )
-#define _PA_SDR		_SA1111( 0x1008 )
-#define _PA_SSR		_SA1111( 0x100c )
-#define _PB_DDR		_SA1111( 0x1010 )
-#define _PB_DRR		_SA1111( 0x1014 )
-#define _PB_DWR		_SA1111( 0x1014 )
-#define _PB_SDR		_SA1111( 0x1018 )
-#define _PB_SSR		_SA1111( 0x101c )
-#define _PC_DDR		_SA1111( 0x1020 )
-#define _PC_DRR		_SA1111( 0x1024 )
-#define _PC_DWR		_SA1111( 0x1024 )
-#define _PC_SDR		_SA1111( 0x1028 )
-#define _PC_SSR		_SA1111( 0x102c )
-
 #define SA1111_GPIO	0x1000
 
 #define SA1111_GPIO_PADDR	(0x000)
@@ -425,106 +385,30 @@
 #define SA1111_WAKEPOL0		0x0034
 #define SA1111_WAKEPOL1		0x0038
 
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers
- *    PS2CR		Control Register
- *    PS2STAT		Status Register
- *    PS2DATA		Transmit/Receive Data register
- *    PS2CLKDIV		Clock Division Register
- *    PS2PRECNT		Clock Precount Register
- *    PS2TEST1		Test register 1
- *    PS2TEST2		Test register 2
- *    PS2TEST3		Test register 3
- *    PS2TEST4		Test register 4
- */
-
+/* PS/2 Trackpad and Mouse Interfaces */
 #define SA1111_KBD		0x0a00
 #define SA1111_MSE		0x0c00
 
-/*
- * These are offsets from the above bases.
- */
-#define SA1111_PS2CR		0x0000
-#define SA1111_PS2STAT		0x0004
-#define SA1111_PS2DATA		0x0008
-#define SA1111_PS2CLKDIV	0x000c
-#define SA1111_PS2PRECNT	0x0010
-
-#define PS2CR_ENA		0x08
-#define PS2CR_FKD		0x02
-#define PS2CR_FKC		0x01
-
-#define PS2STAT_STP		0x0100
-#define PS2STAT_TXE		0x0080
-#define PS2STAT_TXB		0x0040
-#define PS2STAT_RXF		0x0020
-#define PS2STAT_RXB		0x0010
-#define PS2STAT_ENA		0x0008
-#define PS2STAT_RXP		0x0004
-#define PS2STAT_KBD		0x0002
-#define PS2STAT_KBC		0x0001
+/* PCMCIA Interface */
+#define SA1111_PCMCIA		0x1600
 
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- */
-
-#define SA1111_PCMCIA	0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_PCCR	0x0000
-#define SA1111_PCSSR	0x0004
-#define SA1111_PCSR	0x0008
-
-#define PCSR_S0_READY	(1<<0)
-#define PCSR_S1_READY	(1<<1)
-#define PCSR_S0_DETECT	(1<<2)
-#define PCSR_S1_DETECT	(1<<3)
-#define PCSR_S0_VS1	(1<<4)
-#define PCSR_S0_VS2	(1<<5)
-#define PCSR_S1_VS1	(1<<6)
-#define PCSR_S1_VS2	(1<<7)
-#define PCSR_S0_WP	(1<<8)
-#define PCSR_S1_WP	(1<<9)
-#define PCSR_S0_BVD1	(1<<10)
-#define PCSR_S0_BVD2	(1<<11)
-#define PCSR_S1_BVD1	(1<<12)
-#define PCSR_S1_BVD2	(1<<13)
-
-#define PCCR_S0_RST	(1<<0)
-#define PCCR_S1_RST	(1<<1)
-#define PCCR_S0_FLT	(1<<2)
-#define PCCR_S1_FLT	(1<<3)
-#define PCCR_S0_PWAITEN	(1<<4)
-#define PCCR_S1_PWAITEN	(1<<5)
-#define PCCR_S0_PSE	(1<<6)
-#define PCCR_S1_PSE	(1<<7)
-
-#define PCSSR_S0_SLEEP	(1<<0)
-#define PCSSR_S1_SLEEP	(1<<1)
 
 
 
 
 extern struct bus_type sa1111_bus_type;
 
-#define SA1111_DEVID_SBI	0
-#define SA1111_DEVID_SK		1
-#define SA1111_DEVID_USB	2
-#define SA1111_DEVID_SAC	3
-#define SA1111_DEVID_SSP	4
-#define SA1111_DEVID_PS2	5
-#define SA1111_DEVID_GPIO	6
-#define SA1111_DEVID_INT	7
-#define SA1111_DEVID_PCMCIA	8
+#define SA1111_DEVID_SBI	(1 << 0)
+#define SA1111_DEVID_SK		(1 << 1)
+#define SA1111_DEVID_USB	(1 << 2)
+#define SA1111_DEVID_SAC	(1 << 3)
+#define SA1111_DEVID_SSP	(1 << 4)
+#define SA1111_DEVID_PS2	(3 << 5)
+#define SA1111_DEVID_PS2_KBD	(1 << 5)
+#define SA1111_DEVID_PS2_MSE	(1 << 6)
+#define SA1111_DEVID_GPIO	(1 << 7)
+#define SA1111_DEVID_INT	(1 << 8)
+#define SA1111_DEVID_PCMCIA	(1 << 9)
 
 struct sa1111_dev {
 	struct device	dev;
@@ -548,6 +432,7 @@ struct sa1111_driver {
 	int (*remove)(struct sa1111_dev *);
 	int (*suspend)(struct sa1111_dev *, pm_message_t);
 	int (*resume)(struct sa1111_dev *);
+	void (*shutdown)(struct sa1111_dev *);
 };
 
 #define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
@@ -555,9 +440,10 @@ struct sa1111_driver {
 #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
 
 /*
- * These frob the SKPCR register.
+ * These frob the SKPCR register, and call platform specific
+ * enable/disable functions.
  */
-void sa1111_enable_device(struct sa1111_dev *);
+int sa1111_enable_device(struct sa1111_dev *);
 void sa1111_disable_device(struct sa1111_dev *);
 
 unsigned int sa1111_pll_clock(struct sa1111_dev *);
@@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 
 struct sa1111_platform_data {
 	int	irq_base;	/* base for cascaded on-chip IRQs */
+	unsigned disable_devs;
+	void	*data;
+	int	(*enable)(void *, unsigned);
+	void	(*disable)(void *, unsigned);
 };
 
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f16d765..3a27487 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
-obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 804c912..e400d75 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -30,10 +30,7 @@
 
 #include <asm/mach/time.h>
 
-#define IRQ_MASK		0xfe000000	/* read */
-#define IRQ_MSET		0xfe000000	/* write */
-#define IRQ_STAT		0xff000000	/* read */
-#define IRQ_MCLR		0xff000000	/* write */
+#include "core.h"
 
 static void ebsa110_mask_irq(struct irq_data *d)
 {
@@ -79,22 +76,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
 	{	/* IRQ_STAT/IRQ_MCLR */
 		.virtual	= IRQ_STAT,
 		.pfn		= __phys_to_pfn(TRICK4_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK4_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* IRQ_MASK/IRQ_MSET */
 		.virtual	= IRQ_MASK,
 		.pfn		= __phys_to_pfn(TRICK3_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK3_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* SOFT_BASE */
 		.virtual	= SOFT_BASE,
 		.pfn		= __phys_to_pfn(TRICK1_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK1_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PIT_BASE */
 		.virtual	= PIT_BASE,
 		.pfn		= __phys_to_pfn(TRICK0_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK0_SIZE,
 		.type		= MT_DEVICE
 	},
 
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
new file mode 100644
index 0000000..c93c9e4
--- /dev/null
+++ b/arch/arm/mach-ebsa110/core.h
@@ -0,0 +1,41 @@
+/*
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the core hardware definitions of the EBSA-110.
+ */
+#ifndef CORE_H
+#define CORE_H
+
+/* Physical addresses/sizes */
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK0_SIZE		PGDIR_SIZE
+#define TRICK1_PHYS		0xf2400000
+#define TRICK1_SIZE		PGDIR_SIZE
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK3_SIZE		PGDIR_SIZE
+#define TRICK4_PHYS		0xf3000000
+#define TRICK4_SIZE		PGDIR_SIZE
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+/* Virtual addresses */
+#define PIT_BASE		0xfc000000	/* trick 0 */
+#define SOFT_BASE		0xfd000000	/* trick 1 */
+#define IRQ_MASK		0xfe000000	/* trick 3 - read */
+#define IRQ_MSET		0xfe000000	/* trick 3 - write */
+#define IRQ_STAT		0xff000000	/* trick 4 - read */
+#define IRQ_MCLR		0xff000000	/* trick 4 - write */
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
index 4b2fb77..f4e5407 100644
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -12,48 +12,9 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK1_PHYS		0xf2400000
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK4_PHYS		0xf3000000
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
 #define ISAMEM_BASE		0xe0000000
 #define ISAIO_BASE		0xf0000000
 
-#define PIT_BASE		0xfc000000
-#define SOFT_BASE		0xfd000000
-
 /*
  * RAM definitions
  */
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index c52e304..756cc37 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -177,6 +177,26 @@ void writesl(void __iomem *addr, const void *data, int len)
 }
 EXPORT_SYMBOL(writesl);
 
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
 #define SUPERIO_PORT(p) \
 	(((p) >> 3) == (0x3f8 >> 3) || \
 	 ((p) >> 3) == (0x2f8 >> 3) || \
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 6a6ea57..d43121a 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -20,6 +20,8 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
+#include "core.h"
+
 static spinlock_t leds_lock;
 
 static void ebsa110_leds_event(led_event_t ledevt)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6ebd276..6bb3f47 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -223,6 +223,7 @@ static struct resource sa1111_resources[] = {
 
 static struct sa1111_platform_data sa1111_info = {
 	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
+	.disable_devs	= SA1111_DEVID_SAC,
 };
 
 static struct platform_device sa1111_device = {
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index dfa405c..992e28b 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= dma.o fiq.o irq.o riscpc.o
+obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/mach-rpc/ecard.c
index 1651d49..b91bc87 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -42,6 +42,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
+#include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/dma.h>
@@ -54,10 +55,6 @@
 
 #include "ecard.h"
 
-#ifndef CONFIG_ARCH_RPC
-#define HAVE_EXPMASK
-#endif
-
 struct ecard_request {
 	void		(*fn)(struct ecard_request *);
 	ecard_t		*ec;
@@ -77,9 +74,6 @@ struct expcard_blacklist {
 static ecard_t *cards;
 static ecard_t *slot_to_expcard[MAX_ECARDS];
 static unsigned int ectcr;
-#ifdef HAS_EXPMASK
-static unsigned int have_expmask;
-#endif
 
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
@@ -391,22 +385,10 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
 
 static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
 {
-#ifdef HAS_EXPMASK
-	if (irqnr < 4 && have_expmask) {
-		have_expmask |= 1 << irqnr;
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-#endif
 }
 
 static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
 {
-#ifdef HAS_EXPMASK
-	if (irqnr < 4 && have_expmask) {
-		have_expmask &= ~(1 << irqnr);
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-#endif
 }
 
 static int ecard_def_irq_pending(ecard_t *ec)
@@ -446,7 +428,7 @@ static expansioncard_ops_t ecard_default_ops = {
  */
 static void ecard_irq_unmask(struct irq_data *d)
 {
-	ecard_t *ec = slot_to_ecard(d->irq - 32);
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
 
 	if (ec) {
 		if (!ec->ops)
@@ -462,7 +444,7 @@ static void ecard_irq_unmask(struct irq_data *d)
 
 static void ecard_irq_mask(struct irq_data *d)
 {
-	ecard_t *ec = slot_to_ecard(d->irq - 32);
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
 
 	if (ec) {
 		if (!ec->ops)
@@ -579,7 +561,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (ec = cards; ec; ec = ec->next) {
 		int pending;
 
-		if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
+		if (!ec->claimed || !ec->irq || ec->slot_no == 8)
 			continue;
 
 		if (ec->ops && ec->ops->irqpending)
@@ -598,83 +580,6 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 		ecard_check_lockup(desc);
 }
 
-#ifdef HAS_EXPMASK
-static unsigned char priority_masks[] =
-{
-	0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
-};
-
-static unsigned char first_set[] =
-{
-	0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
-	0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
-};
-
-static void
-ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
-{
-	const unsigned int statusmask = 15;
-	unsigned int status;
-
-	status = __raw_readb(EXPMASK_STATUS) & statusmask;
-	if (status) {
-		unsigned int slot = first_set[status];
-		ecard_t *ec = slot_to_ecard(slot);
-
-		if (ec->claimed) {
-			/*
-			 * this ugly code is so that we can operate a
-			 * prioritorising system:
-			 *
-			 * Card 0 	highest priority
-			 * Card 1
-			 * Card 2
-			 * Card 3	lowest priority
-			 *
-			 * Serial cards should go in 0/1, ethernet/scsi in 2/3
-			 * otherwise you will lose serial data at high speeds!
-			 */
-			generic_handle_irq(ec->irq);
-		} else {
-			printk(KERN_WARNING "card%d: interrupt from unclaimed "
-			       "card???\n", slot);
-			have_expmask &= ~(1 << slot);
-			__raw_writeb(have_expmask, EXPMASK_ENABLE);
-		}
-	} else
-		printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
-}
-
-static int __init ecard_probeirqhw(void)
-{
-	ecard_t *ec;
-	int found;
-
-	__raw_writeb(0x00, EXPMASK_ENABLE);
-	__raw_writeb(0xff, EXPMASK_STATUS);
-	found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
-	__raw_writeb(0xff, EXPMASK_ENABLE);
-
-	if (found) {
-		printk(KERN_DEBUG "Expansion card interrupt "
-		       "management hardware found\n");
-
-		/* for each card present, set a bit to '1' */
-		have_expmask = 0x80000000;
-
-		for (ec = cards; ec; ec = ec->next)
-			have_expmask |= 1 << ec->slot_no;
-
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-
-	return found;
-}
-#else
-#define ecard_irqexp_handler NULL
-#define ecard_probeirqhw() (0)
-#endif
-
 static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
 {
 	void __iomem *address = NULL;
@@ -806,8 +711,8 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 
 	ec->slot_no = slot;
 	ec->easi = type == ECARD_EASI;
-	ec->irq = NO_IRQ;
-	ec->fiq = NO_IRQ;
+	ec->irq = 0;
+	ec->fiq = 0;
 	ec->dma = NO_DMA;
 	ec->ops = &ecard_default_ops;
 
@@ -978,8 +883,7 @@ EXPORT_SYMBOL(ecardm_iomap);
  * If bit 1 of the first byte of the card is set, then the
  * card does not exist.
  */
-static int __init
-ecard_probe(int slot, card_type_t type)
+static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 {
 	ecard_t **ecp;
 	ecard_t *ec;
@@ -1033,18 +937,18 @@ ecard_probe(int slot, card_type_t type)
 			break;
 		}
 
+	ec->irq = irq;
+
 	/*
 	 * hook the interrupt handlers
 	 */
 	if (slot < 8) {
-		ec->irq = 32 + slot;
 		irq_set_chip_and_handler(ec->irq, &ecard_chip,
 					 handle_level_irq);
+		irq_set_chip_data(ec->irq, ec);
 		set_irq_flags(ec->irq, IRQF_VALID);
 	}
 
-	if (slot == 8)
-		ec->irq = 11;
 #ifdef CONFIG_ARCH_RPC
 	/* On RiscPC, only first two slots have DMA capability */
 	if (slot < 2)
@@ -1074,28 +978,30 @@ ecard_probe(int slot, card_type_t type)
 static int __init ecard_init(void)
 {
 	struct task_struct *task;
-	int slot, irqhw;
+	int slot, irqbase;
+
+	irqbase = irq_alloc_descs(-1, 0, 8, -1);
+	if (irqbase < 0)
+		return irqbase;
 
 	task = kthread_run(ecard_task, NULL, "kecardd");
 	if (IS_ERR(task)) {
 		printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
 		       PTR_ERR(task));
+		irq_free_descs(irqbase, 8);
 		return PTR_ERR(task);
 	}
 
 	printk("Probing expansion cards\n");
 
 	for (slot = 0; slot < 8; slot ++) {
-		if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
-			ecard_probe(slot, ECARD_IOC);
+		if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
+			ecard_probe(slot, irqbase + slot, ECARD_IOC);
 	}
 
-	ecard_probe(8, ECARD_IOC);
-
-	irqhw = ecard_probeirqhw();
+	ecard_probe(8, 11, ECARD_IOC);
 
-	irq_set_chained_handler(IRQ_EXPANSIONCARD,
-				irqhw ? ecard_irqexp_handler : ecard_irq_handler);
+	irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
 
 	ecard_proc_init();
 
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/mach-rpc/ecard.h
index 4642d43..4642d43 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/mach-rpc/ecard.h
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index 3d20374..6868e17 100644
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -42,6 +42,4 @@
  */
 #define FIQ_START		64
 
-#define IRQ_TIMER		IRQ_TIMER0
-
 #define NR_IRQS			128
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 3d44a59..731552d 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -98,15 +98,9 @@ static void __init rpc_map_io(void)
 }
 
 static struct resource acornfb_resources[] = {
-	{	/* VIDC */
-		.start		= 0x03400000,
-		.end		= 0x035fffff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_VSYNCPULSE,
-		.end		= IRQ_VSYNCPULSE,
-		.flags		= IORESOURCE_IRQ,
-	},
+	/* VIDC */
+	DEFINE_RES_MEM(0x03400000, 0x00200000),
+	DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
 };
 
 static struct platform_device acornfb_device = {
@@ -120,11 +114,7 @@ static struct platform_device acornfb_device = {
 };
 
 static struct resource iomd_resources[] = {
-	{
-		.start		= 0x03200000,
-		.end		= 0x0320ffff,
-		.flags		= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0x03200000, 0x10000),
 };
 
 static struct platform_device iomd_device = {
@@ -134,18 +124,25 @@ static struct platform_device iomd_device = {
 	.resource		= iomd_resources,
 };
 
+static struct resource iomd_kart_resources[] = {
+	DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
+	DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
+};
+
 static struct platform_device kbd_device = {
 	.name			= "kart",
 	.id			= -1,
 	.dev			= {
 		.parent 	= &iomd_device.dev,
 	},
+	.num_resources		= ARRAY_SIZE(iomd_kart_resources),
+	.resource		= iomd_kart_resources,
 };
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= 0x03010fe0,
-		.irq		= 10,
+		.irq		= IRQ_SERIALPORT,
 		.uartclk	= 1843200,
 		.regshift	= 2,
 		.iotype		= UPIO_MEM,
@@ -167,21 +164,9 @@ static struct pata_platform_info pata_platform_data = {
 };
 
 static struct resource pata_resources[] = {
-	[0] = {
-		.start		= 0x030107c0,
-		.end		= 0x030107df,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0x03010fd8,
-		.end		= 0x03010fdb,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= IRQ_HARDDISK,
-		.end		= IRQ_HARDDISK,
-		.flags		= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0x030107c0, 0x20),
+	DEFINE_RES_MEM(0x03010fd8, 0x04),
+	DEFINE_RES_IRQ(IRQ_HARDDISK),
 };
 
 static struct platform_device pata_device = {
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/mach-rpc/time.c
index deeed56..581fca9 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,7 +85,7 @@ static struct irqaction ioc_timer_irq = {
 static void __init ioc_timer_init(void)
 {
 	ioctime_init();
-	setup_irq(IRQ_TIMER, &ioc_timer_irq);
+	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
 
 struct sys_timer ioc_timer = {
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index ed7408d..60b97ec 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76a..375d3f7 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -15,14 +15,16 @@
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
@@ -36,17 +38,18 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/assabet.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
 #define ASSABET_BCR_DB1110 \
-	(ASSABET_BCR_SPK_OFF    | ASSABET_BCR_QMUTE     | \
+	(ASSABET_BCR_SPK_OFF    | \
 	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
 	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
 	 ASSABET_BCR_IRDA_MD0)
 
 #define ASSABET_BCR_DB1111 \
-	(ASSABET_BCR_SPK_OFF    | ASSABET_BCR_QMUTE     | \
+	(ASSABET_BCR_SPK_OFF    | \
 	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
 	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
 	 ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \
@@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
-static void assabet_backlight_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on)
-		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
-	else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight.  When turning the backlight on,
- * we wait 500us after turning it on so we don't cause the
- * supplies to droop when we enable the LCD controller (and
- * cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
+static void assabet_ucb1x00_reset(enum ucb1x00_reset state)
 {
-#ifndef ASSABET_PAL_VIDEO
-	if (on) {
-		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
-		udelay(500);
-	} else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+	if (state == UCB_RST_PROBE)
+		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 }
 
 
@@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = {
 };
 
 static struct resource assabet_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= SA1100_CS1_PHYS,
-		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
 };
 
 
@@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = {
 	.set_speed	= assabet_irda_set_speed,
 };
 
+static struct ucb1x00_plat_data assabet_ucb1x00_data = {
+	.reset		= assabet_ucb1x00_reset,
+	.gpio_base	= -1,
+};
+
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec_pdata	= &assabet_ucb1x00_data,
+};
+
+static void assabet_lcd_set_visual(u32 visual)
+{
+	u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
+
+	if (machine_is_assabet()) {
+#if 1		// phase 4 or newer Assabet's
+		if (is_true_color)
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+#else
+		// older Assabet's
+		if (is_true_color)
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+#endif
+	}
+}
+
+#ifndef ASSABET_PAL_VIDEO
+static void assabet_lcd_backlight_power(int on)
+{
+	if (on)
+		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
+	else
+		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+/*
+ * Turn on/off the backlight.  When turning the backlight on, we wait
+ * 500us after turning it on so we don't cause the supplies to droop
+ * when we enable the LCD controller (and cause a hard reset.)
+ */
+static void assabet_lcd_power(int on)
+{
+	if (on) {
+		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
+		udelay(500);
+	} else
+		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 61,		.upper_margin	= 3,
+	.right_margin	= 9,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.backlight_power = assabet_lcd_backlight_power,
+	.lcd_power = assabet_lcd_power,
+	.set_visual = assabet_lcd_set_visual,
+};
+#else
+static void assabet_pal_backlight_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+static void assabet_pal_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+static struct sa1100fb_mach_info pal_info = {
+	.pixclock	= 67797,	.bpp		= 16,
+	.xres		= 640,		.yres		= 512,
+
+	.hsync_len	= 64,		.vsync_len	= 6,
+	.left_margin	= 125,		.upper_margin	= 70,
+	.right_margin	= 115,		.lower_margin	= 36,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+
+	.backlight_power = assabet_pal_backlight_power,
+	.lcd_power = assabet_pal_power,
+	.set_visual = assabet_lcd_set_visual,
 };
+#endif
+
+#ifdef CONFIG_ASSABET_NEPONSET
+static struct resource neponset_resources[] = {
+	DEFINE_RES_MEM(0x10000000, 0x08000000),
+	DEFINE_RES_MEM(0x18000000, 0x04000000),
+	DEFINE_RES_MEM(0x40000000, SZ_8K),
+	DEFINE_RES_IRQ(IRQ_GPIO25),
+};
+#endif
 
 static void __init assabet_init(void)
 {
 	/*
 	 * Ensure that the power supply is in "high power" mode.
 	 */
-	GPDR |= GPIO_GPIO16;
 	GPSR = GPIO_GPIO16;
+	GPDR |= GPIO_GPIO16;
 
 	/*
 	 * Ensure that these pins are set as outputs and are driving
@@ -218,8 +301,16 @@ static void __init assabet_init(void)
 	 * the WS latch in the CPLD, and we don't float causing
 	 * excessive power drain.  --rmk
 	 */
-	GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
 	GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+	GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+
+	/*
+	 * Also set GPIO27 as an output; this is used to clock UART3
+	 * via the FPGA and as otherwise has no pullups or pulldowns,
+	 * so stop it floating.
+	 */
+	GPCR = GPIO_GPIO27;
+	GPDR |= GPIO_GPIO27;
 
 	/*
 	 * Set up registers for sleep mode.
@@ -231,8 +322,7 @@ static void __init assabet_init(void)
 	PPDR |= PPC_TXD3 | PPC_TXD1;
 	PPSR |= PPC_TXD3 | PPC_TXD1;
 
-	sa1100fb_lcd_power = assabet_lcd_power;
-	sa1100fb_backlight_power = assabet_backlight_power;
+	sa11x0_ppc_configure_mcp();
 
 	if (machine_has_neponset()) {
 		/*
@@ -246,9 +336,17 @@ static void __init assabet_init(void)
 #ifndef CONFIG_ASSABET_NEPONSET
 		printk( "Warning: Neponset detected but full support "
 			"hasn't been configured in the kernel\n" );
+#else
+		platform_device_register_simple("neponset", 0,
+			neponset_resources, ARRAY_SIZE(neponset_resources));
 #endif
 	}
 
+#ifndef ASSABET_PAL_VIDEO
+	sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+	sa11x0_register_lcd(&pal_video);
+#endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
@@ -412,21 +510,8 @@ static void __init assabet_map_io(void)
 	 */
 	Ser1SDCR0 |= SDCR0_SUS;
 
-	if (machine_has_neponset()) {
-#ifdef CONFIG_ASSABET_NEPONSET
-		extern void neponset_map_io(void);
-
-		/*
-		 * We map Neponset registers even if it isn't present since
-		 * many drivers will try to probe their stuff (and fail).
-		 * This is still more friendly than a kernel paging request
-		 * crash.
-		 */
-		neponset_map_io();
-#endif
-	} else {
+	if (!machine_has_neponset())
 		sa1100_register_uart_fns(&assabet_port_fns);
-	}
 
 	/*
 	 * When Neponset is attached, the first UART should be
@@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= assabet_init,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b07a2c0..e0f0c03 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -39,20 +39,27 @@
 #include "generic.h"
 
 static struct resource sa1111_resources[] = {
-	[0] = {
-		.start		= BADGE4_SA1111_BASE,
-		.end		= BADGE4_SA1111_BASE + 0x00001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= BADGE4_IRQ_GPIO_SA1111,
-		.end		= BADGE4_IRQ_GPIO_SA1111,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
+	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
 };
 
+static int badge4_sa1111_enable(void *data, unsigned devid)
+{
+	if (devid == SA1111_DEVID_USB)
+		badge4_set_5V(BADGE4_5V_USB, 1);
+	return 0;
+}
+
+static void badge4_sa1111_disable(void *data, unsigned devid)
+{
+	if (devid == SA1111_DEVID_USB)
+		badge4_set_5V(BADGE4_5V_USB, 0);
+}
+
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
+	.enable		= badge4_sa1111_enable,
+	.disable	= badge4_sa1111_disable,
 };
 
 static u64 sa1111_dmamask = 0xffffffffUL;
@@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = {
 	.nr_parts	= ARRAY_SIZE(badge4_partitions),
 };
 
-static struct resource badge4_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource badge4_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
 
 static int five_v_on __initdata = 0;
 
@@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(0x10000000),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
-	}, {	/* SA-1111      */
-		.virtual	= 0xf4000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -304,6 +303,7 @@ static void __init badge4_map_io(void)
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 	.atag_offset	= 0x100,
 	.map_io		= badge4_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 11bb6d0..4a61f60 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -18,7 +18,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -30,14 +29,11 @@
 
 #include <mach/cerf.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
-	[0] = {
-		.start	= 0x80030000,
-		.end	= 0x8003ffff,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
 };
 
 static struct platform_device cerfuart2_device = {
@@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = {
 	.nr_parts	= ARRAY_SIZE(cerf_partitions),
 };
 
-static struct resource cerf_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource cerf_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init cerf_init_irq(void)
 {
@@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = {
 
 static void __init cerf_init(void)
 {
+	sa11x0_ppc_configure_mcp();
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
 	sa11x0_register_mcp(&cerf_mcp_data);
@@ -136,6 +130,7 @@ static void __init cerf_init(void)
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	/* Maintainer: support@intrinsyc.com */
 	.map_io		= cerf_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd56521..48885b7 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -22,15 +22,17 @@
 #include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/collie.h>
@@ -44,15 +46,12 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
 static struct resource collie_scoop_resources[] = {
-	[0] = {
-		.start		= 0x40800000,
-		.end		= 0x40800fff,
-		.flags		= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
 };
 
 static struct scoop_config collie_scoop_setup = {
@@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+	.codec_pdata	= &collie_ucb1x00_data,
 };
 
 /*
@@ -221,16 +224,8 @@ device_initcall(collie_uart_init);
 
 
 static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x40000000,
-		.end		= 0x40001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_GPIO25,
-		.end		= IRQ_GPIO25,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO25),
 };
 
 static struct locomo_platform_data locomo_info = {
@@ -303,11 +298,21 @@ static struct flash_platform_data collie_flash_data = {
 };
 
 static struct resource collie_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+};
+
+static struct sa1100fb_mach_info collie_lcd_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 11,		.upper_margin	= 2,
+	.right_margin	= 30,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 };
 
 static void __init collie_init(void)
@@ -341,6 +346,10 @@ static void __init collie_init(void)
 
 	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
 	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
+
+	sa11x0_ppc_configure_mcp();
+
+
 	platform_scoop_config = &collie_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -348,6 +357,7 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
+	sa11x0_register_lcd(&collie_lcd_info);
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
@@ -383,6 +393,7 @@ static void __init collie_map_io(void)
 
 MACHINE_START(COLLIE, "Sharp-Collie")
 	.map_io		= collie_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
deleted file mode 100644
index ad66035..0000000
--- a/arch/arm/mach-sa1100/dma.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * arch/arm/mach-sa1100/dma.c
- *
- * Support functions for the SA11x0 internal DMA channels.
- *
- * Copyright (C) 2000, 2001 by Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK( s, arg... )  printk( "dma<%p>: " s, regs , ##arg )
-#else
-#define DPRINTK( x... )
-#endif
-
-
-typedef struct {
-	const char *device_id;		/* device name */
-	u_long device;			/* this channel device, 0  if unused*/
-	dma_callback_t callback;	/* to call when DMA completes */
-	void *data;			/* ... with private data ptr */
-} sa1100_dma_t;
-
-static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
-
-static DEFINE_SPINLOCK(dma_list_lock);
-
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	dma_regs_t *dma_regs = dev_id;
-	sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7);
-	int status = dma_regs->RdDCSR;
-
-	if (status & (DCSR_ERROR)) {
-		printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id);
-		dma_regs->ClrDCSR = DCSR_ERROR;
-	}
-
-	dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB);
-	if (dma->callback) {
-		if (status & DCSR_DONEA)
-			dma->callback(dma->data);
-		if (status & DCSR_DONEB)
-			dma->callback(dma->data);
-	}
-	return IRQ_HANDLED;
-}
-
-
-/**
- *	sa1100_request_dma - allocate one of the SA11x0's DMA channels
- *	@device: The SA11x0 peripheral targeted by this request
- *	@device_id: An ascii name for the claiming device
- *	@callback: Function to be called when the DMA completes
- *	@data: A cookie passed back to the callback function
- *	@dma_regs: Pointer to the location of the allocated channel's identifier
- *
- * 	This function will search for a free DMA channel and returns the
- * 	address of the hardware registers for that channel as the channel
- * 	identifier. This identifier is written to the location pointed by
- * 	@dma_regs. The list of possible values for @device are listed into
- * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
- *
- * 	Note that reading from a port and writing to the same port are
- * 	actually considered as two different streams requiring separate
- * 	DMA registrations.
- *
- * 	The @callback function is called from interrupt context when one
- * 	of the two possible DMA buffers in flight has terminated. That
- * 	function has to be small and efficient while posponing more complex
- * 	processing to a lower priority execution context.
- *
- * 	If no channels are available, or if the desired @device is already in
- * 	use by another DMA channel, then an error code is returned.  This
- * 	function must be called before any other DMA calls.
- **/
-
-int sa1100_request_dma (dma_device_t device, const char *device_id,
-			dma_callback_t callback, void *data,
-			dma_regs_t **dma_regs)
-{
-	sa1100_dma_t *dma = NULL;
-	dma_regs_t *regs;
-	int i, err;
-
-	*dma_regs = NULL;
-
-	err = 0;
-	spin_lock(&dma_list_lock);
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++) {
-		if (dma_chan[i].device == device) {
-			err = -EBUSY;
-			break;
-		} else if (!dma_chan[i].device && !dma) {
-			dma = &dma_chan[i];
-		}
-	}
-	if (!err) {
-		if (dma)
-			dma->device = device;
-		else
-			err = -ENOSR;
-	}
-	spin_unlock(&dma_list_lock);
-	if (err)
-		return err;
-
-	i = dma - dma_chan;
-	regs = (dma_regs_t *)&DDAR(i);
-	err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED,
-			  device_id, regs);
-	if (err) {
-		printk(KERN_ERR
-		       "%s: unable to request IRQ %d for %s\n",
-		       __func__, IRQ_DMA0 + i, device_id);
-		dma->device = 0;
-		return err;
-	}
-
-	*dma_regs = regs;
-	dma->device_id = device_id;
-	dma->callback = callback;
-	dma->data = data;
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	regs->DDAR = device;
-
-	return 0;
-}
-
-
-/**
- * 	sa1100_free_dma - free a SA11x0 DMA channel
- * 	@regs: identifier for the channel to free
- *
- * 	This clears all activities on a given DMA channel and releases it
- * 	for future requests.  The @regs identifier is provided by a
- * 	successful call to sa1100_request_dma().
- **/
-
-void sa1100_free_dma(dma_regs_t *regs)
-{
-	int i;
-
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++)
-		if (regs == (dma_regs_t *)&DDAR(i))
-			break;
-	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	if (!dma_chan[i].device) {
-		printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
-		return;
-	}
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	free_irq(IRQ_DMA0 + i, regs);
-	dma_chan[i].device = 0;
-}
-
-
-/**
- * 	sa1100_start_dma - submit a data buffer for DMA
- * 	@regs: identifier for the channel to use
- * 	@dma_ptr: buffer physical (or bus) start address
- * 	@size: buffer size
- *
- * 	This function hands the given data buffer to the hardware for DMA
- * 	access. If another buffer is already in flight then this buffer
- * 	will be queued so the DMA engine will switch to it automatically
- * 	when the previous one is done.  The DMA engine is actually toggling
- * 	between two buffers so at most 2 successful calls can be made before
- * 	one of them terminates and the callback function is called.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- *
- * 	The @size must not be larger than %MAX_DMA_SIZE.  If a given buffer
- * 	is larger than that then it's the caller's responsibility to split
- * 	it into smaller chunks and submit them separately. If this is the
- * 	case then a @size of %CUT_DMA_SIZE is recommended to avoid ending
- * 	up with too small chunks. The callback function can be used to chain
- * 	submissions of buffer chunks.
- *
- * 	Error return values:
- * 	%-EOVERFLOW:	Given buffer size is too big.
- * 	%-EBUSY:	Both DMA buffers are already in use.
- * 	%-EAGAIN:	Both buffers were busy but one of them just completed
- * 			but the interrupt handler has to execute first.
- *
- * 	This function returs 0 on success.
- **/
-
-int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size)
-{
-	unsigned long flags;
-	u_long status;
-	int ret;
-
-	if (dma_ptr & 3)
-		printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n",
-		       (unsigned long)dma_ptr);
-
-	if (size > MAX_DMA_SIZE)
-		return -EOVERFLOW;
-
-	local_irq_save(flags);
-	status = regs->RdDCSR;
-
-	/* If both DMA buffers are started, there's nothing else we can do. */
-	if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) {
-		DPRINTK("start: st %#x busy\n", status);
-		ret = -EBUSY;
-		goto out;
-	}
-
-	if (((status & DCSR_BIU) && (status & DCSR_STRTB)) ||
-	    (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) {
-		if (status & DCSR_DONEA) {
-			/* give a chance for the interrupt to be processed */
-			ret = -EAGAIN;
-			goto out;
-		}
-		regs->DBSA = dma_ptr;
-		regs->DBTA = size;
-		regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN;
-		DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size);
-	} else {
-		if (status & DCSR_DONEB) {
-			/* give a chance for the interrupt to be processed */
-			ret = -EAGAIN;
-			goto out;
-		}
-		regs->DBSB = dma_ptr;
-		regs->DBTB = size;
-		regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN;
-		DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size);
-	}
-	ret = 0;
-
-out:
-	local_irq_restore(flags);
-	return ret;
-}
-
-
-/**
- * 	sa1100_get_dma_pos - return current DMA position
- * 	@regs: identifier for the channel to use
- *
- * 	This function returns the current physical (or bus) address for the
- * 	given DMA channel.  If the channel is running i.e. not in a stopped
- * 	state then the caller must disable interrupts prior calling this
- * 	function and process the returned value before re-enabling them to
- * 	prevent races with the completion interrupt handler and the callback
- * 	function. The validation of the returned value is the caller's
- * 	responsibility as well -- the hardware seems to return out of range
- * 	values when the DMA engine completes a buffer.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs)
-{
-	int status;
-
-	/*
-	 * We must determine whether buffer A or B is active.
-	 * Two possibilities: either we are in the middle of
-	 * a buffer, or the DMA controller just switched to the
-	 * next toggle but the interrupt hasn't been serviced yet.
-	 * The former case is straight forward.  In the later case,
-	 * we'll do like if DMA is just at the end of the previous
-	 * toggle since all registers haven't been reset yet.
-	 * This goes around the edge case and since we're always
-	 * a little behind anyways it shouldn't make a big difference.
-	 * If DMA has been stopped prior calling this then the
-	 * position is exact.
-	 */
-	status = regs->RdDCSR;
-	if ((!(status & DCSR_BIU) &&  (status & DCSR_STRTA)) ||
-	    ( (status & DCSR_BIU) && !(status & DCSR_STRTB)))
-		return regs->DBSA;
-	else
-		return regs->DBSB;
-}
-
-
-/**
- * 	sa1100_reset_dma - reset a DMA channel
- * 	@regs: identifier for the channel to use
- *
- * 	This function resets and reconfigure the given DMA channel. This is
- * 	particularly useful after a sleep/wakeup event.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-void sa1100_reset_dma(dma_regs_t *regs)
-{
-	int i;
-
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++)
-		if (regs == (dma_regs_t *)&DDAR(i))
-			break;
-	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	regs->DDAR = dma_chan[i].device;
-}
-
-
-EXPORT_SYMBOL(sa1100_request_dma);
-EXPORT_SYMBOL(sa1100_free_dma);
-EXPORT_SYMBOL(sa1100_start_dma);
-EXPORT_SYMBOL(sa1100_get_dma_pos);
-EXPORT_SYMBOL(sa1100_reset_dma);
-
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c1ebf4..1d0f71b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -14,18 +14,23 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/div64.h>
-#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 unsigned int reset_status;
@@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data)
 
 
 static struct resource sa11x0udc_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser0UDCCR),
-		.end	= __PREG(Ser0UDCCR) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser0UDC,
-		.end	= IRQ_Ser0UDC,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
 };
 
 static u64 sa11x0udc_dma_mask = 0xffffffffUL;
@@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = {
 };
 
 static struct resource sa11x0uart1_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser1UTCR0),
-		.end	= __PREG(Ser1UTCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser1UART,
-		.end	= IRQ_Ser1UART,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
 };
 
 static struct platform_device sa11x0uart1_device = {
@@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = {
 };
 
 static struct resource sa11x0uart3_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser3UTCR0),
-		.end	= __PREG(Ser3UTCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser3UART,
-		.end	= IRQ_Ser3UART,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
 };
 
 static struct platform_device sa11x0uart3_device = {
@@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = {
 };
 
 static struct resource sa11x0mcp_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser4MCP,
-		.end	= IRQ_Ser4MCP,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
+	[1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
+	[2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
 };
 
 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
@@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
+void __init sa11x0_ppc_configure_mcp(void)
+{
+	/* Setup the PPC unit for the MCP */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+}
+
 void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
 	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
-	[0] = {
-		.start	= 0x80070000,
-		.end	= 0x8007ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser4SSP,
-		.end	= IRQ_Ser4SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
 };
 
 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
@@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = {
 };
 
 static struct resource sa11x0fb_resources[] = {
-	[0] = {
-		.start	= 0xb0100000,
-		.end	= 0xb010ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_LCD,
-		.end	= IRQ_LCD,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD),
 };
 
 static struct platform_device sa11x0fb_device = {
@@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = {
 	.resource	= sa11x0fb_resources,
 };
 
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+	sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
 static struct platform_device sa11x0pcmcia_device = {
 	.name		= "sa11x0-pcmcia",
 	.id		= -1,
@@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash,
 }
 
 static struct resource sa11x0ir_resources[] = {
-	{
-		.start	= __PREG(Ser2UTCR0),
-		.end	= __PREG(Ser2UTCR0) + 0x24 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= __PREG(Ser2HSCR0),
-		.end	= __PREG(Ser2HSCR0) + 0x1c - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= __PREG(Ser2HSCR2),
-		.end	= __PREG(Ser2HSCR2) + 0x04 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_Ser2ICP,
-		.end	= IRQ_Ser2ICP,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
+	DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
+	DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
+	DEFINE_RES_IRQ(IRQ_Ser2ICP),
 };
 
 static struct platform_device sa11x0ir_device = {
@@ -358,14 +318,37 @@ static struct platform_device sa11x0rtc_device = {
 	.resource	= sa1100_rtc_resources,
 };
 
+static struct resource sa11x0dma_resources[] = {
+	DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
+	DEFINE_RES_IRQ(IRQ_DMA0),
+	DEFINE_RES_IRQ(IRQ_DMA1),
+	DEFINE_RES_IRQ(IRQ_DMA2),
+	DEFINE_RES_IRQ(IRQ_DMA3),
+	DEFINE_RES_IRQ(IRQ_DMA4),
+	DEFINE_RES_IRQ(IRQ_DMA5),
+};
+
+static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device sa11x0dma_device = {
+	.name		= "sa11x0-dma",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &sa11x0dma_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0dma_resources),
+	.resource	= sa11x0dma_resources,
+};
+
 static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
-	&sa11x0fb_device,
 	&sa11x0rtc_device,
+	&sa11x0dma_device,
 };
 
 static int __init sa1100_init(void)
@@ -376,12 +359,6 @@ static int __init sa1100_init(void)
 
 arch_initcall(sa1100_init);
 
-void (*sa1100fb_backlight_power)(int on);
-void (*sa1100fb_lcd_power)(int on);
-
-EXPORT_SYMBOL(sa1100fb_backlight_power);
-EXPORT_SYMBOL(sa1100fb_lcd_power);
-
 
 /*
  * Common I/O mapping:
@@ -436,7 +413,7 @@ void __init sa1100_map_io(void)
  * the MBGNT signal false to ensure the SA1111 doesn't own the
  * SDRAM bus.
  */
-void __init sa1110_mb_disable(void)
+void sa1110_mb_disable(void)
 {
 	unsigned long flags;
 
@@ -455,7 +432,7 @@ void __init sa1110_mb_disable(void)
  * If the system is going to use the SA-1111 DMA engines, set up
  * the memory bus request/grant pins.
  */
-void __devinit sa1110_mb_enable(void)
+void sa1110_mb_enable(void)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf..9eb3b3c 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *);
 	mi->bank[__nr].start = (__start), \
 	mi->bank[__nr].size = (__size)
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
@@ -39,4 +36,8 @@ struct irda_platform_data;
 void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
+void sa11x0_ppc_configure_mcp(void);
 void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c1..b2e8d0f 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,11 +14,14 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable)
 	}
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+	.pixclock	= 406977, 	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 26,		.vsync_len	= 41,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 4,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 1,
+	.cmap_inverse	= 1,
+
+	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.lcd_power = h3100_lcd_power,
+};
 
 static void __init h3100_map_io(void)
 {
 	h3xxx_map_io();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
-
 	/* Older bootldrs put GPIO2-9 in alternate mode on the
 	   assumption that they are used for video */
 	GAFR &= ~0x000001fb;
@@ -80,12 +98,15 @@ static void __init h3100_mach_init(void)
 {
 	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3100_mach_init,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e74..cb6659f 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,11 +14,14 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -56,11 +59,35 @@ err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
 err1:	return;
 }
 
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+	.red	= { .offset = 12, .length = 4, },
+	.green	= { .offset = 7,  .length = 4, },
+	.blue	= { .offset = 1,  .length = 4, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+	.pixclock	= 174757, 	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 3,		.vsync_len	= 3,
+	.left_margin	= 12,		.upper_margin	= 10,
+	.right_margin	= 17,		.lower_margin	= 1,
+
+	.cmap_static	= 1,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.rgb[RGB_16] = &h3600_rgb_16,
+
+	.lcd_power = h3600_lcd_power,
+};
+
+
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
-
-	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
 /*
@@ -121,12 +148,15 @@ static void __init h3600_mach_init(void)
 {
 	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3600_lcd_info);
 	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.atag_offset	= 0x100,
 	.map_io		= h3600_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3600_mach_init,
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index b0784c9..63150e1 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = {
 	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
 };
 
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource h3xxx_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 
 /*
@@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = {
  */
 
 static struct resource egpio_resources[] = {
-	[0] = {
-		.start	= H3600_EGPIO_PHYS,
-		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4),
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index c01bb36..5535475 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,12 +22,10 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -35,6 +33,9 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /**********************************************************************
@@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = {
 	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
 };
 
-static struct resource hackkit_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource hackkit_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init hackkit_init(void)
 {
@@ -197,6 +195,7 @@ static void __init hackkit_init(void)
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
 	.atag_offset	= 0x100,
 	.map_io		= hackkit_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index bae8296..3f2d1b6 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1590,224 +1590,9 @@
 
 /*
  * Direct Memory Access (DMA) control registers
- *
- * Registers
- *    DDAR0     	Direct Memory Access (DMA) Device Address Register
- *              	channel 0 (read/write).
- *    DCSR0     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 0 (read/write).
- *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 0 (read/write).
- *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 0 (read/write).
- *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 0 (read/write).
- *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 0 (read/write).
- *
- *    DDAR1     	Direct Memory Access (DMA) Device Address Register
- *              	channel 1 (read/write).
- *    DCSR1     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 1 (read/write).
- *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 1 (read/write).
- *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 1 (read/write).
- *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 1 (read/write).
- *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 1 (read/write).
- *
- *    DDAR2     	Direct Memory Access (DMA) Device Address Register
- *              	channel 2 (read/write).
- *    DCSR2     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 2 (read/write).
- *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 2 (read/write).
- *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 2 (read/write).
- *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 2 (read/write).
- *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 2 (read/write).
- *
- *    DDAR3     	Direct Memory Access (DMA) Device Address Register
- *              	channel 3 (read/write).
- *    DCSR3     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 3 (read/write).
- *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 3 (read/write).
- *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 3 (read/write).
- *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 3 (read/write).
- *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 3 (read/write).
- *
- *    DDAR4     	Direct Memory Access (DMA) Device Address Register
- *              	channel 4 (read/write).
- *    DCSR4     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 4 (read/write).
- *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 4 (read/write).
- *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 4 (read/write).
- *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 4 (read/write).
- *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 4 (read/write).
- *
- *    DDAR5     	Direct Memory Access (DMA) Device Address Register
- *              	channel 5 (read/write).
- *    DCSR5     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 5 (read/write).
- *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 5 (read/write).
- *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 5 (read/write).
- *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 5 (read/write).
- *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 5 (read/write).
  */
-
-#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
-
-#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
-#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
-#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
-#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
-#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
-#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
-#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
-#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
-
-#define DDAR_RW 	0x00000001	/* device data Read/Write          */
-#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
-                	        	/*  (memory -> device)             */
-#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
-                	        	/*  (device -> memory)             */
-#define DDAR_E  	0x00000002	/* big/little Endian device        */
-#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
-#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
-#define DDAR_BS 	0x00000004	/* device Burst Size               */
-#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
-#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
-#define DDAR_DW 	0x00000008	/* device Data Width               */
-#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
-#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
-#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
-#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
-                	(0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
-                	(0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
-                	(0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
-                	(0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
-                	(0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
-                	(0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
-                	(0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
-                	(0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
-                	(0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
-                	(0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
-                	        	/*  (audio)                        */ \
-                	(0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
-                	        	/*  (audio)                        */ \
-                	(0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
-                	        	/*  (telecom)                      */ \
-                	(0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
-                	        	/*  (telecom)                      */ \
-                	(0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
-                	(0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
-                	(0xF << FShft (DDAR_DS))
-#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
-#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
-                	(((Add) & 0xF0000000) | \
-                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
-#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
-
-#define DCSR_RUN	0x00000001	/* DMA running                     */
-#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
-#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
-#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
-#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
-#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
-#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
-#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
-#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
-#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
-
-#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
-#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
-#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
+#define DMA_SIZE	(6 * 0x20)
+#define DMA_PHYS	0xb0000000
 
 
 /*
@@ -1903,16 +1688,6 @@
 #define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
                 	        	/* (Alternative)                   */
 
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
 #define LCCR0_LEN	0x00000001	/* LCD ENable                      */
 #define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
deleted file mode 100644
index dda1b35..0000000
--- a/arch/arm/mach-sa1100/include/mach/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS	6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE		0x1fff
-#define CUT_DMA_SIZE		0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
-	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
-	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
-	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
-	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
-	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
-	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
-	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
-	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
-	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
-	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
-	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
-	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
-	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
-	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
-	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
-	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
-	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
-	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
-	volatile u_long DDAR;
-	volatile u_long SetDCSR;
-	volatile u_long ClrDCSR;
-	volatile u_long RdDCSR;
-	volatile dma_addr_t DBSA;
-	volatile u_long DBTA;
-	volatile dma_addr_t DBSB;
-	volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
-			       dma_callback_t callback, void *data,
-			       dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * 	sa1100_stop_dma - stop DMA in progress
- * 	@regs: identifier for the channel to use
- *
- * 	This stops DMA without clearing buffer pointers. Unlike
- * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * 	or sa1100_get_dma_pos().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_resume_dma - resume DMA on a stopped channel
- * 	@regs: identifier for the channel to use
- *
- * 	This resumes DMA on a channel previously stopped with
- * 	sa1100_stop_dma().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_clear_dma - clear DMA pointers
- * 	@regs: identifier for the channel to use
- *
- * 	This clear any DMA state so the DMA engine is ready to restart
- * 	with new buffers through sa1100_start_dma(). Any buffers in flight
- * 	are discarded.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index d18f21a..3790298 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -71,22 +71,19 @@
 /*
  * Figure out the MAX IRQ number.
  *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
- * Otherwise, we have the standard IRQs only.
+ * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
+ * allocate their IRQs above NR_IRQS.
+ *
+ * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
+ * to be included in the NR_IRQS calculation.
  */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_BOARD_START + 4)
+#ifdef CONFIG_SHARP_LOCOMO
+#define NR_IRQS_LOCOMO		4
 #else
-#define NR_IRQS			(IRQ_BOARD_START)
+#define NR_IRQS_LOCOMO		0
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+#ifndef NR_IRQS
+#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#endif
+#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index ed1a331..4b2860ae 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,7 +16,7 @@ struct mcp_plat_data {
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
-	int gpio_base;
+	void *codec_pdata;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index ffe2bc4..5516a52 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -15,54 +15,6 @@
 /*
  * Neponset definitions: 
  */
-
-#define NEPONSET_CPLD_BASE      (0x10000000)
-#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR                    0x10000024      /* Interrupt Reason Register */
-#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
-#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
-#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
-#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
-#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
-#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
-#define _SWPK                   0x10000020      /* Switch pack (RO)          */
-#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
-
-#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
-
-#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET		(1<<0)
-#define IRR_USAR		(1<<1)
-#define IRR_SA1111		(1<<2)
-
-#define AUD_SEL_1341            (1<<0)
-#define AUD_MUTE_1341           (1<<1)
-
-#define MDM_CTL0_RTS1		(1 << 0)
-#define MDM_CTL0_DTR1		(1 << 1)
-#define MDM_CTL0_RTS2		(1 << 2)
-#define MDM_CTL0_DTR2		(1 << 3)
-
-#define MDM_CTL1_CTS1		(1 << 0)
-#define MDM_CTL1_DSR1		(1 << 1)
-#define MDM_CTL1_DCD1		(1 << 2)
-#define MDM_CTL1_CTS2		(1 << 3)
-#define MDM_CTL1_DSR2		(1 << 4)
-#define MDM_CTL1_DCD2		(1 << 5)
-
 #define NCR_GP01_OFF		(1<<0)
 #define NCR_TP_PWR_EN		(1<<1)
 #define NCR_MS_PWR_EN		(1<<2)
@@ -71,4 +23,8 @@
 #define NCR_A0VPP		(1<<5)
 #define NCR_A1VPP		(1<<6)
 
+void neponset_ncr_frob(unsigned int, unsigned int);
+#define neponset_ncr_set(v)	neponset_ncr_frob(0, v)
+#define neponset_ncr_clear(v)	neponset_ncr_frob(v, 0)
+
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index 019f857..fff39e0 100644
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -21,7 +21,7 @@
 #define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
 #define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
 #define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+#define SHANNON_GPIO_DISP_EN		22		/* out */
 /* XXX GPIO 23 unaccounted for */
 #define SHANNON_GPIO_EJECT_0		24		/* in */
 #define SHANNON_GPIO_EJECT_1		25		/* in */
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index dfbf824..516ccc2 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -17,6 +17,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
@@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = {
 	.irq_set_wake	= sa1100_set_wake,
 };
 
-static struct resource irq_resource = {
-	.name	= "irqs",
-	.start	= 0x90050000,
-	.end	= 0x9005ffff,
-};
+static struct resource irq_resource =
+	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
 
 static struct sa1100irq_state {
 	unsigned int	saved;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index ee121d6..ca7a7e8 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,9 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -34,6 +32,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /*
@@ -46,7 +47,7 @@
 
 /* memory space (line 52 of HP's doc) */
 #define SA1111REGSTART	0x40000000
-#define SA1111REGLEN	0x00001fff
+#define SA1111REGLEN	0x00002000
 #define EPSONREGSTART	0x48000000
 #define EPSONREGLEN	0x00100000
 #define EPSONFBSTART	0x48200000
@@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
 };
 
 static struct resource s1d13xxxfb_resources[] = {
-	[0] = {
-		.start	= EPSONFBSTART,
-		.end	= EPSONFBSTART + EPSONFBLEN,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EPSONREGSTART,
-		.end	= EPSONREGSTART + EPSONREGLEN,
-		.flags	= IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN),
+	[1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN),
 };
 
 static struct platform_device s1d13xxxfb_device = {
@@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = {
 };
 
 static struct resource sa1111_resources[] = {
-	[0] = {
-		.start		= SA1111REGSTART,
-		.end		= SA1111REGSTART + SA1111REGLEN,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_GPIO1,
-		.end		= IRQ_GPIO1,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO1),
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
 };
 
 static u64 sa1111_dmamask = 0xffffffffUL;
@@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(EPSONFBSTART),
 		.length		= EPSONFBLEN,
 		.type		= MT_DEVICE
-	}, {	/* SA-1111 */
-		.virtual	= 0xf4000000,
-		.pfn		= __phys_to_pfn(SA1111REGSTART),
-		.length		= SA1111REGLEN,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = {
 	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
 };
 
-static struct resource jornada720_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource jornada720_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init jornada720_mach_init(void)
 {
@@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
 	.atag_offset	= 0x100,
 	.map_io		= jornada720_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= jornada720_mach_init,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e276..eb6534e 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -15,6 +17,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+	.pixclock	= 150000,	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 1,		.vsync_len	= 1,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 2,		.lower_margin	= 0,
+
+	.cmap_greyscale	= 1,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+	.pixclock	= 150000,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 2,		.vsync_len	= 3,
+	.left_margin	= 69,		.upper_margin	= 14,
+	.right_margin	= 8,		.lower_margin	= 4,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+	.pixclock	= 39721,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 95,		.vsync_len	= 2,
+	.left_margin	= 40,		.upper_margin	= 32,
+	.right_margin	= 24,		.lower_margin	= 11,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+	.pixclock	= 63291,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 64,		.vsync_len	= 3,
+	.left_margin	= 122,		.upper_margin	= 45,
+	.right_margin	= 10,		.lower_margin	= 10,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
 static void __init lart_init(void)
 {
+	struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+	inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+	inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+	inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+	inf = &lart_kit01_info;
+#endif
+
+	if (inf)
+		sa11x0_register_lcd(inf);
+
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
@@ -63,6 +144,7 @@ static void __init lart_map_io(void)
 MACHINE_START(LART, "LART")
 	.atag_offset	= 0x100,
 	.map_io		= lart_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 85f6ee6..8f6446b 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -28,6 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/nanoengine.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = {
 };
 
 static struct resource nanoengine_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= SA1100_CS1_PHYS,
-		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
 };
 
 static struct map_desc nanoengine_io_desc[] __initdata = {
@@ -114,6 +108,7 @@ static void __init nanoengine_init(void)
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
 	.atag_offset	= 0x100,
 	.map_io		= nanoengine_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= nanoengine_init,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index b4fa53a..6c58f01 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -1,89 +1,104 @@
 /*
  * linux/arch/arm/mach-sa1100/neponset.c
- *
  */
-#include <linux/kernel.h>
+#include <linux/err.h>
 #include <linux/init.h>
-#include <linux/tty.h>
 #include <linux/ioport.h>
-#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <mach/assabet.h>
-#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
-/*
- * Install handler for Neponset IRQ.  Note that we have to loop here
- * since the ETHERNET and USAR IRQs are level based, and we need to
- * ensure that the IRQ signal is deasserted before returning.  This
- * is rather unfortunate.
- */
-static void
-neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int irr;
-
-	while (1) {
-		/*
-		 * Acknowledge the parent IRQ.
-		 */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		/*
-		 * Read the interrupt reason register.  Let's have all
-		 * active IRQ bits high.  Note: there is a typo in the
-		 * Neponset user's guide for the SA1111 IRR level.
-		 */
-		irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
-
-		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
-			break;
-
-		/*
-		 * Since there is no individual mask, we have to
-		 * mask the parent IRQ.  This is safe, since we'll
-		 * recheck the register for any pending IRQs.
-		 */
-		if (irr & (IRR_ETHERNET | IRR_USAR)) {
-			desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-			/*
-			 * Ack the interrupt now to prevent re-entering
-			 * this neponset handler.  Again, this is safe
-			 * since we'll check the IRR register prior to
-			 * leaving.
-			 */
-			desc->irq_data.chip->irq_ack(&desc->irq_data);
+#include <mach/hardware.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
+#include <mach/irqs.h>
+
+#define NEP_IRQ_SMC91X	0
+#define NEP_IRQ_USAR	1
+#define NEP_IRQ_SA1111	2
+#define NEP_IRQ_NR	3
+
+#define WHOAMI		0x00
+#define LEDS		0x10
+#define SWPK		0x20
+#define IRR		0x24
+#define KP_Y_IN		0x80
+#define KP_X_OUT	0x90
+#define NCR_0		0xa0
+#define MDM_CTL_0	0xb0
+#define MDM_CTL_1	0xb4
+#define AUD_CTL		0xc0
+
+#define IRR_ETHERNET	(1 << 0)
+#define IRR_USAR	(1 << 1)
+#define IRR_SA1111	(1 << 2)
+
+#define MDM_CTL0_RTS1	(1 << 0)
+#define MDM_CTL0_DTR1	(1 << 1)
+#define MDM_CTL0_RTS2	(1 << 2)
+#define MDM_CTL0_DTR2	(1 << 3)
+
+#define MDM_CTL1_CTS1	(1 << 0)
+#define MDM_CTL1_DSR1	(1 << 1)
+#define MDM_CTL1_DCD1	(1 << 2)
+#define MDM_CTL1_CTS2	(1 << 3)
+#define MDM_CTL1_DSR2	(1 << 4)
+#define MDM_CTL1_DCD2	(1 << 5)
+
+#define AUD_SEL_1341	(1 << 0)
+#define AUD_MUTE_1341	(1 << 1)
 
-			if (irr & IRR_ETHERNET) {
-				generic_handle_irq(IRQ_NEPONSET_SMC9196);
-			}
+extern void sa1110_mb_disable(void);
 
-			if (irr & IRR_USAR) {
-				generic_handle_irq(IRQ_NEPONSET_USAR);
-			}
+struct neponset_drvdata {
+	void __iomem *base;
+	struct platform_device *sa1111;
+	struct platform_device *smc91x;
+	unsigned irq_base;
+#ifdef CONFIG_PM_SLEEP
+	u32 ncr0;
+	u32 mdm_ctl_0;
+#endif
+};
 
-			desc->irq_data.chip->irq_unmask(&desc->irq_data);
-		}
+static void __iomem *nep_base;
 
-		if (irr & IRR_SA1111) {
-			generic_handle_irq(IRQ_NEPONSET_SA1111);
-		}
+void neponset_ncr_frob(unsigned int mask, unsigned int val)
+{
+	void __iomem *base = nep_base;
+
+	if (base) {
+		unsigned long flags;
+		unsigned v;
+
+		local_irq_save(flags);
+		v = readb_relaxed(base + NCR_0);
+		writeb_relaxed((v & ~mask) | val, base + NCR_0);
+		local_irq_restore(flags);
+	} else {
+		WARN(1, "nep_base unset\n");
 	}
 }
 
 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 {
-	u_int mdm_ctl0 = MDM_CTL_0;
+	void __iomem *base = nep_base;
+	u_int mdm_ctl0;
 
+	if (!base)
+		return;
+
+	mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
 	if (port->mapbase == _Ser1UTCR0) {
 		if (mctrl & TIOCM_RTS)
 			mdm_ctl0 &= ~MDM_CTL0_RTS2;
@@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 			mdm_ctl0 |= MDM_CTL0_DTR1;
 	}
 
-	MDM_CTL_0 = mdm_ctl0;
+	writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
 }
 
 static u_int neponset_get_mctrl(struct uart_port *port)
 {
+	void __iomem *base = nep_base;
 	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	u_int mdm_ctl1 = MDM_CTL_1;
+	u_int mdm_ctl1;
+
+	if (!base)
+		return ret;
 
+	mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
 	if (port->mapbase == _Ser1UTCR0) {
 		if (mdm_ctl1 & MDM_CTL1_DCD2)
 			ret &= ~TIOCM_CD;
@@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = {
 	.get_mctrl	= neponset_get_mctrl,
 };
 
-static int __devinit neponset_probe(struct platform_device *dev)
+/*
+ * Install handler for Neponset IRQ.  Note that we have to loop here
+ * since the ETHERNET and USAR IRQs are level based, and we need to
+ * ensure that the IRQ signal is deasserted before returning.  This
+ * is rather unfortunate.
+ */
+static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	sa1100_register_uart_fns(&neponset_port_fns);
+	struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
+	unsigned int irr;
 
-	/*
-	 * Install handler for GPIO25.
-	 */
-	irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler);
+	while (1) {
+		/*
+		 * Acknowledge the parent IRQ.
+		 */
+		desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-	/*
-	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but
-	 * unfortunately something on the Neponset activates
-	 * this IRQ on sleep (ethernet?)
-	 */
-#if 0
-	enable_irq_wake(IRQ_GPIO25);
-#endif
+		/*
+		 * Read the interrupt reason register.  Let's have all
+		 * active IRQ bits high.  Note: there is a typo in the
+		 * Neponset user's guide for the SA1111 IRR level.
+		 */
+		irr = readb_relaxed(d->base + IRR);
+		irr ^= IRR_ETHERNET | IRR_USAR;
 
-	/*
-	 * Setup other Neponset IRQs.  SA1111 will be done by the
-	 * generic SA1111 code.
-	 */
-	irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
-	set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
-	irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
-	set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
+		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
+			break;
 
-	/*
-	 * Disable GPIO 0/1 drivers so the buttons work on the module.
-	 */
-	NCR_0 = NCR_GP01_OFF;
+		/*
+		 * Since there is no individual mask, we have to
+		 * mask the parent IRQ.  This is safe, since we'll
+		 * recheck the register for any pending IRQs.
+		 */
+		if (irr & (IRR_ETHERNET | IRR_USAR)) {
+			desc->irq_data.chip->irq_mask(&desc->irq_data);
 
-	return 0;
-}
+			/*
+			 * Ack the interrupt now to prevent re-entering
+			 * this neponset handler.  Again, this is safe
+			 * since we'll check the IRR register prior to
+			 * leaving.
+			 */
+			desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-#ifdef CONFIG_PM
+			if (irr & IRR_ETHERNET)
+				generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
 
-/*
- * LDM power management.
- */
-static unsigned int neponset_saved_state;
+			if (irr & IRR_USAR)
+				generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
 
-static int neponset_suspend(struct platform_device *dev, pm_message_t state)
-{
-	/*
-	 * Save state.
-	 */
-	neponset_saved_state = NCR_0;
+			desc->irq_data.chip->irq_unmask(&desc->irq_data);
+		}
 
-	return 0;
+		if (irr & IRR_SA1111)
+			generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
+	}
 }
 
-static int neponset_resume(struct platform_device *dev)
+/* Yes, we really do not have any kind of masking or unmasking */
+static void nochip_noop(struct irq_data *irq)
 {
-	NCR_0 = neponset_saved_state;
-
-	return 0;
 }
 
-#else
-#define neponset_suspend NULL
-#define neponset_resume  NULL
-#endif
-
-static struct platform_driver neponset_device_driver = {
-	.probe		= neponset_probe,
-	.suspend	= neponset_suspend,
-	.resume		= neponset_resume,
-	.driver		= {
-		.name	= "neponset",
-	},
-};
-
-static struct resource neponset_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x17ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device neponset_device = {
-	.name		= "neponset",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(neponset_resources),
-	.resource	= neponset_resources,
-};
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x40000000,
-		.end	= 0x40001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NEPONSET_SA1111,
-		.end	= IRQ_NEPONSET_SA1111,
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct irq_chip nochip = {
+	.name = "neponset",
+	.irq_ack = nochip_noop,
+	.irq_mask = nochip_noop,
+	.irq_unmask = nochip_noop,
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
 };
 
-static u64 sa1111_dmamask = 0xffffffffUL;
+static int __devinit neponset_probe(struct platform_device *dev)
+{
+	struct neponset_drvdata *d;
+	struct resource *nep_res, *sa1111_res, *smc91x_res;
+	struct resource sa1111_resources[] = {
+		DEFINE_RES_MEM(0x40000000, SZ_8K),
+		{ .flags = IORESOURCE_IRQ },
+	};
+	struct platform_device_info sa1111_devinfo = {
+		.parent = &dev->dev,
+		.name = "sa1111",
+		.id = 0,
+		.res = sa1111_resources,
+		.num_res = ARRAY_SIZE(sa1111_resources),
+		.data = &sa1111_info,
+		.size_data = sizeof(sa1111_info),
+		.dma_mask = 0xffffffffUL,
+	};
+	struct resource smc91x_resources[] = {
+		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
+			0x02000000, "smc91x-regs"),
+		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
+			0x02000000, "smc91x-attrib"),
+		{ .flags = IORESOURCE_IRQ },
+	};
+	struct platform_device_info smc91x_devinfo = {
+		.parent = &dev->dev,
+		.name = "smc91x",
+		.id = 0,
+		.res = smc91x_resources,
+		.num_res = ARRAY_SIZE(smc91x_resources),
+	};
+	int ret, irq;
+
+	if (nep_base)
+		return -EBUSY;
+
+	irq = ret = platform_get_irq(dev, 0);
+	if (ret < 0)
+		goto err_alloc;
+
+	nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
+	if (!nep_res || !smc91x_res || !sa1111_res) {
+		ret = -ENXIO;
+		goto err_alloc;
+	}
 
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
 
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= SA1100_CS3_PHYS,
-		.end	= SA1100_CS3_PHYS + 0x01ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NEPONSET_SMC9196,
-		.end	= IRQ_NEPONSET_SMC9196,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= SA1100_CS3_PHYS + 0x02000000,
-		.end	= SA1100_CS3_PHYS + 0x03ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
+	d->base = ioremap(nep_res->start, SZ_4K);
+	if (!d->base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
 
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
+	if (readb_relaxed(d->base + WHOAMI) != 0x11) {
+		dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
+			 readb_relaxed(d->base + WHOAMI));
+		ret = -ENODEV;
+		goto err_id;
+	}
 
-static struct platform_device *devices[] __initdata = {
-	&neponset_device,
-	&sa1111_device,
-	&smc91x_device,
-};
+	ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
+			NEP_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -ENOMEM;
+		goto err_irq_alloc;
+	}
 
-extern void sa1110_mb_disable(void);
+	d->irq_base = ret;
 
-static int __init neponset_init(void)
-{
-	platform_driver_register(&neponset_device_driver);
+	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
+		handle_simple_irq);
+	set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
+	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
+		handle_simple_irq);
+	set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
+	irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
 
-	/*
-	 * The Neponset is only present on the Assabet machine type.
-	 */
-	if (!machine_is_assabet())
-		return -ENODEV;
+	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(irq, d);
+	irq_set_chained_handler(irq, neponset_irq_handler);
 
 	/*
-	 * Ensure that the memory bus request/grant signals are setup,
-	 * and the grant is held in its inactive state, whether or not
-	 * we actually have a Neponset attached.
+	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
+	 * something on the Neponset activates this IRQ on sleep (eth?)
 	 */
+#if 0
+	enable_irq_wake(irq);
+#endif
+
+	dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
+		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
+	nep_base = d->base;
+
+	sa1100_register_uart_fns(&neponset_port_fns);
+
+	/* Ensure that the memory bus request/grant signals are setup */
 	sa1110_mb_disable();
 
-	if (!machine_has_neponset()) {
-		printk(KERN_DEBUG "Neponset expansion board not present\n");
-		return -ENODEV;
-	}
+	/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
+	writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
 
-	if (WHOAMI != 0x11) {
-		printk(KERN_WARNING "Neponset board detected, but "
-			"wrong ID: %02x\n", WHOAMI);
-		return -ENODEV;
-	}
+	sa1111_resources[0].parent = sa1111_res;
+	sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
+	sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
+	d->sa1111 = platform_device_register_full(&sa1111_devinfo);
+
+	smc91x_resources[0].parent = smc91x_res;
+	smc91x_resources[1].parent = smc91x_res;
+	smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
+	smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
+	d->smc91x = platform_device_register_full(&smc91x_devinfo);
+
+	platform_set_drvdata(dev, d);
 
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
+	return 0;
+
+ err_irq_alloc:
+ err_id:
+	iounmap(d->base);
+ err_ioremap:
+	kfree(d);
+ err_alloc:
+	return ret;
 }
 
-subsys_initcall(neponset_init);
+static int __devexit neponset_remove(struct platform_device *dev)
+{
+	struct neponset_drvdata *d = platform_get_drvdata(dev);
+	int irq = platform_get_irq(dev, 0);
+
+	if (!IS_ERR(d->sa1111))
+		platform_device_unregister(d->sa1111);
+	if (!IS_ERR(d->smc91x))
+		platform_device_unregister(d->smc91x);
+	irq_set_chained_handler(irq, NULL);
+	irq_free_descs(d->irq_base, NEP_IRQ_NR);
+	nep_base = NULL;
+	iounmap(d->base);
+	kfree(d);
 
-static struct map_desc neponset_io_desc[] __initdata = {
-	{	/* System Registers */
-		.virtual	=  0xf3000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}, {	/* SA-1111 */
-		.virtual	=  0xf4000000,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int neponset_suspend(struct device *dev)
+{
+	struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+	d->ncr0 = readb_relaxed(d->base + NCR_0);
+	d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
+
+	return 0;
+}
+
+static int neponset_resume(struct device *dev)
+{
+	struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+	writeb_relaxed(d->ncr0, d->base + NCR_0);
+	writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops neponset_pm_ops = {
+	.suspend_noirq = neponset_suspend,
+	.resume_noirq = neponset_resume,
+	.freeze_noirq = neponset_suspend,
+	.restore_noirq = neponset_resume,
+};
+#define PM_OPS &neponset_pm_ops
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver neponset_device_driver = {
+	.probe		= neponset_probe,
+	.remove		= __devexit_p(neponset_remove),
+	.driver		= {
+		.name	= "neponset",
+		.owner	= THIS_MODULE,
+		.pm	= PM_OPS,
+	},
 };
 
-void __init neponset_map_io(void)
+static int __init neponset_init(void)
 {
-	iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
+	return platform_driver_register(&neponset_device_driver);
 }
+
+subsys_initcall(neponset_init);
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index b466bca..b49108b 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys
 				 &sys->resources);
 }
 
-static struct resource pci_io_ports = {
-	.name	= "PCI IO",
-	.start	= 0x400,
-	.end	= 0x7FF,
-	.flags	= IORESOURCE_IO,
-};
+static struct resource pci_io_ports =
+	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
 
 static struct resource pci_non_prefetchable_memory = {
 	.name	= "PCI non-prefetchable",
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 9307df0..1602575 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -37,17 +37,9 @@
 #define IRQ_GPIO_ETH0_IRQ	IRQ_GPIO21
 
 static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PLEB_ETH0_P,
-		.end	= PLEB_ETH0_P | 0x03ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
 #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
-	[1] = {
-		.start	= IRQ_GPIO_ETH0_IRQ,
-		.end	= IRQ_GPIO_ETH0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
 #endif
 };
 
@@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = {
  * the two SA1100 lowest chip select outputs.
  */
 static struct resource pleb_flash_resources[] = {
-	[0] = {
-		.start = SA1100_CS0_PHYS,
-		.end   = SA1100_CS0_PHYS + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = SA1100_CS1_PHYS,
-		.end   = SA1100_CS1_PHYS + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
+	[1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
 };
 
 
@@ -147,6 +131,7 @@ static void __init pleb_map_io(void)
 
 MACHINE_START(PLEB, "PLEB")
 	.map_io		= pleb_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b7..ca8bf59 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -19,6 +21,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/shannon.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = {
 	.nr_parts	= ARRAY_SIZE(shannon_partitions),
 };
 
-static struct resource shannon_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_4M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource shannon_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
 
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
 };
 
+static struct sa1100fb_mach_info shannon_lcd_info = {
+	.pixclock	= 152500,	.bpp		= 8,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 4,		.vsync_len	= 3,
+	.left_margin	= 2,		.upper_margin	= 0,
+	.right_margin	= 1,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+	.lccr3		= LCCR3_ACBsDiv(512),
+};
+
 static void __init shannon_init(void)
 {
+	sa11x0_ppc_configure_mcp();
+	sa11x0_register_lcd(&shannon_lcd_info);
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
@@ -84,6 +100,7 @@ static void __init shannon_map_io(void)
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
 	.atag_offset	= 0x100,
 	.map_io		= shannon_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index e17c04d..3efae03 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -7,15 +7,15 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/proc_fs.h>
-#include <linux/string.h> 
+#include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -26,6 +26,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/simpad.h>
+#include <mach/irqs.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
@@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = {
 
 
 static struct resource simpad_flash_resources [] = {
-	{
-		.start     = SA1100_CS0_PHYS,
-		.end       = SA1100_CS0_PHYS + SZ_16M -1,
-		.flags     = IORESOURCE_MEM,
-	}, {
-		.start     = SA1100_CS1_PHYS,
-		.end       = SA1100_CS1_PHYS + SZ_16M -1,
-		.flags     = IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
+};
+
+static struct ucb1x00_plat_data simpad_ucb1x00_data = {
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
 };
 
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
+	.codec_pdata	= &simpad_ucb1x00_data,
 };
 
 
@@ -376,6 +374,7 @@ static int __init simpad_init(void)
 
 	pm_power_off = simpad_power_off;
 
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
 	sa11x0_register_mcp(&simpad_mcp_data);
@@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
 	.atag_offset	= 0x100,
 	.map_io		= simpad_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index e822331..30cc672 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -26,27 +26,36 @@
  *
  * Causes sa11x0 to enter sleep state
  *
+ * Must be aligned to a cacheline.
  */
-
+	.balign	32
 ENTRY(sa1100_finish_suspend)
 	@ disable clock switching
 	mcr	p15, 0, r1, c15, c2, 2
 
-        @ Adjust memory timing before lowering CPU clock
-	@ Clock speed adjustment without changing memory timing makes
-	@ CPU hang in some cases
-        ldr     r0, =MDREFR
-        ldr     r1, [r0]
-        orr     r1, r1, #MDREFR_K1DB2
-        str     r1, [r0]
+	ldr	r6, =MDREFR
+	ldr	r4, [r6]
+	orr     r4, r4, #MDREFR_K1DB2
+	ldr	r5, =PPCR
+
+	@ Pre-load __udelay into the I-cache
+	mov	r0, #1
+	bl	__udelay
+	mov	r0, r0
+
+	@ The following must all exist in a single cache line to
+	@ avoid accessing memory until this sequence is complete,
+	@ otherwise we occasionally hang.
+
+	@ Adjust memory timing before lowering CPU clock
+	str     r4, [r6]
 
 	@ delay 90us and set CPU PLL to lowest speed
 	@ fixes resume problem on high speed SA1110
 	mov	r0, #90
 	bl	__udelay
-	ldr	r0, =PPCR
 	mov	r1, #0
-	str	r1, [r0]
+	str	r1, [r5]
 	mov	r0, #90
 	bl	__udelay
 
@@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend)
 	bic	r5, r5, #FMsk(MSC_RT)
 	bic	r5, r5, #FMsk(MSC_RT)<<16
 
-	ldr	r6, =MDREFR
-
 	ldr	r7, [r6]
-bic	r7, r7, #0x0000FF00
-bic	r7, r7, #0x000000F0
-orr	r8, r7, #MDREFR_SLFRSH
+	bic	r7, r7, #0x0000FF00
+	bic	r7, r7, #0x000000F0
+	orr	r8, r7, #MDREFR_SLFRSH
 
 	ldr	r9, =MDCNFG
 	ldr	r10, [r9]
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index b20ff93..e22fca9 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -19,8 +19,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 69e3353..6af26e8 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -18,6 +18,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static u32 notrace sa1100_read_sched_clock(void)
 {
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f1a2749..4a6c46de 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -252,6 +252,15 @@ config EP93XX_DMA
 	help
 	  Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
 
+config DMA_SA11X0
+	tristate "SA-11x0 DMA support"
+	depends on ARCH_SA1100
+	select DMA_ENGINE
+	help
+	  Support the DMA engine found on Intel StrongARM SA-1100 and
+	  SA-1110 SoCs.  This DMA engine can only be used with on-chip
+	  devices.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 009a222..86b795b 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PCH_DMA) += pch_dma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
 obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
+obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
new file mode 100644
index 0000000..16a6b48
--- /dev/null
+++ b/drivers/dma/sa11x0-dma.c
@@ -0,0 +1,1109 @@
+/*
+ * SA11x0 DMAengine support
+ *
+ * Copyright (C) 2012 Russell King
+ *   Derived in part from arch/arm/mach-sa1100/dma.c,
+ *   Copyright (C) 2000, 2001 by Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sa11x0-dma.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define NR_PHY_CHAN	6
+#define DMA_ALIGN	3
+#define DMA_MAX_SIZE	0x1fff
+#define DMA_CHUNK_SIZE	0x1000
+
+#define DMA_DDAR	0x00
+#define DMA_DCSR_S	0x04
+#define DMA_DCSR_C	0x08
+#define DMA_DCSR_R	0x0c
+#define DMA_DBSA	0x10
+#define DMA_DBTA	0x14
+#define DMA_DBSB	0x18
+#define DMA_DBTB	0x1c
+#define DMA_SIZE	0x20
+
+#define DCSR_RUN	(1 << 0)
+#define DCSR_IE		(1 << 1)
+#define DCSR_ERROR	(1 << 2)
+#define DCSR_DONEA	(1 << 3)
+#define DCSR_STRTA	(1 << 4)
+#define DCSR_DONEB	(1 << 5)
+#define DCSR_STRTB	(1 << 6)
+#define DCSR_BIU	(1 << 7)
+
+#define DDAR_RW		(1 << 0)	/* 0 = W, 1 = R */
+#define DDAR_E		(1 << 1)	/* 0 = LE, 1 = BE */
+#define DDAR_BS		(1 << 2)	/* 0 = BS4, 1 = BS8 */
+#define DDAR_DW		(1 << 3)	/* 0 = 8b, 1 = 16b */
+#define DDAR_Ser0UDCTr	(0x0 << 4)
+#define DDAR_Ser0UDCRc	(0x1 << 4)
+#define DDAR_Ser1SDLCTr	(0x2 << 4)
+#define DDAR_Ser1SDLCRc	(0x3 << 4)
+#define DDAR_Ser1UARTTr	(0x4 << 4)
+#define DDAR_Ser1UARTRc	(0x5 << 4)
+#define DDAR_Ser2ICPTr	(0x6 << 4)
+#define DDAR_Ser2ICPRc	(0x7 << 4)
+#define DDAR_Ser3UARTTr	(0x8 << 4)
+#define DDAR_Ser3UARTRc	(0x9 << 4)
+#define DDAR_Ser4MCP0Tr	(0xa << 4)
+#define DDAR_Ser4MCP0Rc	(0xb << 4)
+#define DDAR_Ser4MCP1Tr	(0xc << 4)
+#define DDAR_Ser4MCP1Rc	(0xd << 4)
+#define DDAR_Ser4SSPTr	(0xe << 4)
+#define DDAR_Ser4SSPRc	(0xf << 4)
+
+struct sa11x0_dma_sg {
+	u32			addr;
+	u32			len;
+};
+
+struct sa11x0_dma_desc {
+	struct dma_async_tx_descriptor tx;
+	u32			ddar;
+	size_t			size;
+
+	/* maybe protected by c->lock */
+	struct list_head	node;
+	unsigned		sglen;
+	struct sa11x0_dma_sg	sg[0];
+};
+
+struct sa11x0_dma_phy;
+
+struct sa11x0_dma_chan {
+	struct dma_chan		chan;
+	spinlock_t		lock;
+	dma_cookie_t		lc;
+
+	/* protected by c->lock */
+	struct sa11x0_dma_phy	*phy;
+	enum dma_status		status;
+	struct list_head	desc_submitted;
+	struct list_head	desc_issued;
+
+	/* protected by d->lock */
+	struct list_head	node;
+
+	u32			ddar;
+	const char		*name;
+};
+
+struct sa11x0_dma_phy {
+	void __iomem		*base;
+	struct sa11x0_dma_dev	*dev;
+	unsigned		num;
+
+	struct sa11x0_dma_chan	*vchan;
+
+	/* Protected by c->lock */
+	unsigned		sg_load;
+	struct sa11x0_dma_desc	*txd_load;
+	unsigned		sg_done;
+	struct sa11x0_dma_desc	*txd_done;
+#ifdef CONFIG_PM_SLEEP
+	u32			dbs[2];
+	u32			dbt[2];
+	u32			dcsr;
+#endif
+};
+
+struct sa11x0_dma_dev {
+	struct dma_device	slave;
+	void __iomem		*base;
+	spinlock_t		lock;
+	struct tasklet_struct	task;
+	struct list_head	chan_pending;
+	struct list_head	desc_complete;
+	struct sa11x0_dma_phy	phy[NR_PHY_CHAN];
+};
+
+static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct sa11x0_dma_chan, chan);
+}
+
+static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev)
+{
+	return container_of(dmadev, struct sa11x0_dma_dev, slave);
+}
+
+static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct sa11x0_dma_desc, tx);
+}
+
+static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c)
+{
+	if (list_empty(&c->desc_issued))
+		return NULL;
+
+	return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node);
+}
+
+static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd)
+{
+	list_del(&txd->node);
+	p->txd_load = txd;
+	p->sg_load = 0;
+
+	dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n",
+		p->num, txd, txd->tx.cookie, txd->ddar);
+}
+
+static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p,
+	struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = p->txd_load;
+	struct sa11x0_dma_sg *sg;
+	void __iomem *base = p->base;
+	unsigned dbsx, dbtx;
+	u32 dcsr;
+
+	if (!txd)
+		return;
+
+	dcsr = readl_relaxed(base + DMA_DCSR_R);
+
+	/* Don't try to load the next transfer if both buffers are started */
+	if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB))
+		return;
+
+	if (p->sg_load == txd->sglen) {
+		struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c);
+
+		/*
+		 * We have reached the end of the current descriptor.
+		 * Peek at the next descriptor, and if compatible with
+		 * the current, start processing it.
+		 */
+		if (txn && txn->ddar == txd->ddar) {
+			txd = txn;
+			sa11x0_dma_start_desc(p, txn);
+		} else {
+			p->txd_load = NULL;
+			return;
+		}
+	}
+
+	sg = &txd->sg[p->sg_load++];
+
+	/* Select buffer to load according to channel status */
+	if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) ||
+	    ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) {
+		dbsx = DMA_DBSA;
+		dbtx = DMA_DBTA;
+		dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN;
+	} else {
+		dbsx = DMA_DBSB;
+		dbtx = DMA_DBTB;
+		dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN;
+	}
+
+	writel_relaxed(sg->addr, base + dbsx);
+	writel_relaxed(sg->len, base + dbtx);
+	writel(dcsr, base + DMA_DCSR_S);
+
+	dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n",
+		p->num, dcsr,
+		'A' + (dbsx == DMA_DBSB), sg->addr,
+		'A' + (dbtx == DMA_DBTB), sg->len);
+}
+
+static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p,
+	struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = p->txd_done;
+
+	if (++p->sg_done == txd->sglen) {
+		struct sa11x0_dma_dev *d = p->dev;
+
+		dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n",
+			p->num, p->txd_done, p->txd_done->tx.cookie);
+
+		c->lc = txd->tx.cookie;
+
+		spin_lock(&d->lock);
+		list_add_tail(&txd->node, &d->desc_complete);
+		spin_unlock(&d->lock);
+
+		p->sg_done = 0;
+		p->txd_done = p->txd_load;
+
+		tasklet_schedule(&d->task);
+	}
+
+	sa11x0_dma_start_sg(p, c);
+}
+
+static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id)
+{
+	struct sa11x0_dma_phy *p = dev_id;
+	struct sa11x0_dma_dev *d = p->dev;
+	struct sa11x0_dma_chan *c;
+	u32 dcsr;
+
+	dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+	if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB)))
+		return IRQ_NONE;
+
+	/* Clear reported status bits */
+	writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB),
+		p->base + DMA_DCSR_C);
+
+	dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr);
+
+	if (dcsr & DCSR_ERROR) {
+		dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n",
+			p->num, dcsr,
+			readl_relaxed(p->base + DMA_DDAR),
+			readl_relaxed(p->base + DMA_DBSA),
+			readl_relaxed(p->base + DMA_DBTA),
+			readl_relaxed(p->base + DMA_DBSB),
+			readl_relaxed(p->base + DMA_DBTB));
+	}
+
+	c = p->vchan;
+	if (c) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&c->lock, flags);
+		/*
+		 * Now that we're holding the lock, check that the vchan
+		 * really is associated with this pchan before touching the
+		 * hardware.  This should always succeed, because we won't
+		 * change p->vchan or c->phy while the channel is actively
+		 * transferring.
+		 */
+		if (c->phy == p) {
+			if (dcsr & DCSR_DONEA)
+				sa11x0_dma_complete(p, c);
+			if (dcsr & DCSR_DONEB)
+				sa11x0_dma_complete(p, c);
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c);
+
+	/* If the issued list is empty, we have no further txds to process */
+	if (txd) {
+		struct sa11x0_dma_phy *p = c->phy;
+
+		sa11x0_dma_start_desc(p, txd);
+		p->txd_done = txd;
+		p->sg_done = 0;
+
+		/* The channel should not have any transfers started */
+		WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) &
+				      (DCSR_STRTA | DCSR_STRTB));
+
+		/* Clear the run and start bits before changing DDAR */
+		writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB,
+			       p->base + DMA_DCSR_C);
+		writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+		/* Try to start both buffers */
+		sa11x0_dma_start_sg(p, c);
+		sa11x0_dma_start_sg(p, c);
+	}
+}
+
+static void sa11x0_dma_tasklet(unsigned long arg)
+{
+	struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg;
+	struct sa11x0_dma_phy *p;
+	struct sa11x0_dma_chan *c;
+	struct sa11x0_dma_desc *txd, *txn;
+	LIST_HEAD(head);
+	unsigned pch, pch_alloc = 0;
+
+	dev_dbg(d->slave.dev, "tasklet enter\n");
+
+	/* Get the completed tx descriptors */
+	spin_lock_irq(&d->lock);
+	list_splice_init(&d->desc_complete, &head);
+	spin_unlock_irq(&d->lock);
+
+	list_for_each_entry(txd, &head, node) {
+		c = to_sa11x0_dma_chan(txd->tx.chan);
+
+		dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n",
+			c, txd, txd->tx.cookie);
+
+		spin_lock_irq(&c->lock);
+		p = c->phy;
+		if (p) {
+			if (!p->txd_done)
+				sa11x0_dma_start_txd(c);
+			if (!p->txd_done) {
+				/* No current txd associated with this channel */
+				dev_dbg(d->slave.dev, "pchan %u: free\n", p->num);
+
+				/* Mark this channel free */
+				c->phy = NULL;
+				p->vchan = NULL;
+			}
+		}
+		spin_unlock_irq(&c->lock);
+	}
+
+	spin_lock_irq(&d->lock);
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		p = &d->phy[pch];
+
+		if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
+			c = list_first_entry(&d->chan_pending,
+				struct sa11x0_dma_chan, node);
+			list_del_init(&c->node);
+
+			pch_alloc |= 1 << pch;
+
+			/* Mark this channel allocated */
+			p->vchan = c;
+
+			dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c);
+		}
+	}
+	spin_unlock_irq(&d->lock);
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		if (pch_alloc & (1 << pch)) {
+			p = &d->phy[pch];
+			c = p->vchan;
+
+			spin_lock_irq(&c->lock);
+			c->phy = p;
+
+			sa11x0_dma_start_txd(c);
+			spin_unlock_irq(&c->lock);
+		}
+	}
+
+	/* Now free the completed tx descriptor, and call their callbacks */
+	list_for_each_entry_safe(txd, txn, &head, node) {
+		dma_async_tx_callback callback = txd->tx.callback;
+		void *callback_param = txd->tx.callback_param;
+
+		dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n",
+			txd, txd->tx.cookie);
+
+		kfree(txd);
+
+		if (callback)
+			callback(callback_param);
+	}
+
+	dev_dbg(d->slave.dev, "tasklet exit\n");
+}
+
+
+static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head)
+{
+	struct sa11x0_dma_desc *txd, *txn;
+
+	list_for_each_entry_safe(txd, txn, head, node) {
+		dev_dbg(d->slave.dev, "txd %p: freeing\n", txd);
+		kfree(txd);
+	}
+}
+
+static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return 0;
+}
+
+static void sa11x0_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&c->lock, flags);
+	spin_lock(&d->lock);
+	list_del_init(&c->node);
+	spin_unlock(&d->lock);
+
+	list_splice_tail_init(&c->desc_submitted, &head);
+	list_splice_tail_init(&c->desc_issued, &head);
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	sa11x0_dma_desc_free(d, &head);
+}
+
+static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p)
+{
+	unsigned reg;
+	u32 dcsr;
+
+	dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+	if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA ||
+	    (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU)
+		reg = DMA_DBSA;
+	else
+		reg = DMA_DBSB;
+
+	return readl_relaxed(p->base + reg);
+}
+
+static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan,
+	dma_cookie_t cookie, struct dma_tx_state *state)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	struct sa11x0_dma_phy *p;
+	struct sa11x0_dma_desc *txd;
+	dma_cookie_t last_used, last_complete;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	last_used = c->chan.cookie;
+	last_complete = c->lc;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret == DMA_SUCCESS) {
+		dma_set_tx_state(state, last_complete, last_used, 0);
+		return ret;
+	}
+
+	spin_lock_irqsave(&c->lock, flags);
+	p = c->phy;
+	ret = c->status;
+	if (p) {
+		dma_addr_t addr = sa11x0_dma_pos(p);
+
+		dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr);
+
+		txd = p->txd_done;
+		if (txd) {
+			unsigned i;
+
+			for (i = 0; i < txd->sglen; i++) {
+				dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n",
+					i, txd->sg[i].addr, txd->sg[i].len);
+				if (addr >= txd->sg[i].addr &&
+				    addr < txd->sg[i].addr + txd->sg[i].len) {
+					unsigned len;
+
+					len = txd->sg[i].len -
+						(addr - txd->sg[i].addr);
+					dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n",
+						i, len);
+					bytes += len;
+					i++;
+					break;
+				}
+			}
+			for (; i < txd->sglen; i++) {
+				dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n",
+					i, txd->sg[i].addr, txd->sg[i].len);
+				bytes += txd->sg[i].len;
+			}
+		}
+		if (txd != p->txd_load && p->txd_load)
+			bytes += p->txd_load->size;
+	}
+	list_for_each_entry(txd, &c->desc_issued, node) {
+		bytes += txd->size;
+	}
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	dma_set_tx_state(state, last_complete, last_used, bytes);
+
+	dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes);
+
+	return ret;
+}
+
+/*
+ * Move pending txds to the issued list, and re-init pending list.
+ * If not already pending, add this channel to the list of pending
+ * channels and trigger the tasklet to run.
+ */
+static void sa11x0_dma_issue_pending(struct dma_chan *chan)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->lock, flags);
+	list_splice_tail_init(&c->desc_submitted, &c->desc_issued);
+	if (!list_empty(&c->desc_issued)) {
+		spin_lock(&d->lock);
+		if (!c->phy && list_empty(&c->node)) {
+			list_add_tail(&c->node, &d->chan_pending);
+			tasklet_schedule(&d->task);
+			dev_dbg(d->slave.dev, "vchan %p: issued\n", c);
+		}
+		spin_unlock(&d->lock);
+	} else
+		dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c);
+	spin_unlock_irqrestore(&c->lock, flags);
+}
+
+static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan);
+	struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx);
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->lock, flags);
+	c->chan.cookie += 1;
+	if (c->chan.cookie < 0)
+		c->chan.cookie = 1;
+	txd->tx.cookie = c->chan.cookie;
+
+	list_add_tail(&txd->node, &c->desc_submitted);
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n",
+		c, txd, txd->tx.cookie);
+
+	return txd->tx.cookie;
+}
+
+static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen,
+	enum dma_transfer_direction dir, unsigned long flags)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_desc *txd;
+	struct scatterlist *sgent;
+	unsigned i, j = sglen;
+	size_t size = 0;
+
+	/* SA11x0 channels can only operate in their native direction */
+	if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
+		dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
+			c, c->ddar, dir);
+		return NULL;
+	}
+
+	/* Do not allow zero-sized txds */
+	if (sglen == 0)
+		return NULL;
+
+	for_each_sg(sg, sgent, sglen, i) {
+		dma_addr_t addr = sg_dma_address(sgent);
+		unsigned int len = sg_dma_len(sgent);
+
+		if (len > DMA_MAX_SIZE)
+			j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1;
+		if (addr & DMA_ALIGN) {
+			dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n",
+				c, addr);
+			return NULL;
+		}
+	}
+
+	txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC);
+	if (!txd) {
+		dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c);
+		return NULL;
+	}
+
+	j = 0;
+	for_each_sg(sg, sgent, sglen, i) {
+		dma_addr_t addr = sg_dma_address(sgent);
+		unsigned len = sg_dma_len(sgent);
+
+		size += len;
+
+		do {
+			unsigned tlen = len;
+
+			/*
+			 * Check whether the transfer will fit.  If not, try
+			 * to split the transfer up such that we end up with
+			 * equal chunks - but make sure that we preserve the
+			 * alignment.  This avoids small segments.
+			 */
+			if (tlen > DMA_MAX_SIZE) {
+				unsigned mult = DIV_ROUND_UP(tlen,
+					DMA_MAX_SIZE & ~DMA_ALIGN);
+
+				tlen = (tlen / mult) & ~DMA_ALIGN;
+			}
+
+			txd->sg[j].addr = addr;
+			txd->sg[j].len = tlen;
+
+			addr += tlen;
+			len -= tlen;
+			j++;
+		} while (len);
+	}
+
+	dma_async_tx_descriptor_init(&txd->tx, &c->chan);
+	txd->tx.flags = flags;
+	txd->tx.tx_submit = sa11x0_dma_tx_submit;
+	txd->ddar = c->ddar;
+	txd->size = size;
+	txd->sglen = j;
+
+	dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n",
+		c, txd, txd->size, txd->sglen);
+
+	return &txd->tx;
+}
+
+static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg)
+{
+	u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW);
+	dma_addr_t addr;
+	enum dma_slave_buswidth width;
+	u32 maxburst;
+
+	if (ddar & DDAR_RW) {
+		addr = cfg->src_addr;
+		width = cfg->src_addr_width;
+		maxburst = cfg->src_maxburst;
+	} else {
+		addr = cfg->dst_addr;
+		width = cfg->dst_addr_width;
+		maxburst = cfg->dst_maxburst;
+	}
+
+	if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE &&
+	     width != DMA_SLAVE_BUSWIDTH_2_BYTES) ||
+	    (maxburst != 4 && maxburst != 8))
+		return -EINVAL;
+
+	if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+		ddar |= DDAR_DW;
+	if (maxburst == 8)
+		ddar |= DDAR_BS;
+
+	dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n",
+		c, addr, width, maxburst);
+
+	c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6;
+
+	return 0;
+}
+
+static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+	unsigned long arg)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	struct sa11x0_dma_phy *p;
+	LIST_HEAD(head);
+	unsigned long flags;
+	int ret;
+
+	switch (cmd) {
+	case DMA_SLAVE_CONFIG:
+		return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg);
+
+	case DMA_TERMINATE_ALL:
+		dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c);
+		/* Clear the tx descriptor lists */
+		spin_lock_irqsave(&c->lock, flags);
+		list_splice_tail_init(&c->desc_submitted, &head);
+		list_splice_tail_init(&c->desc_issued, &head);
+
+		p = c->phy;
+		if (p) {
+			struct sa11x0_dma_desc *txd, *txn;
+
+			dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num);
+			/* vchan is assigned to a pchan - stop the channel */
+			writel(DCSR_RUN | DCSR_IE |
+				DCSR_STRTA | DCSR_DONEA |
+				DCSR_STRTB | DCSR_DONEB,
+				p->base + DMA_DCSR_C);
+
+			list_for_each_entry_safe(txd, txn, &d->desc_complete, node)
+				if (txd->tx.chan == &c->chan)
+					list_move(&txd->node, &head);
+
+			if (p->txd_load) {
+				if (p->txd_load != p->txd_done)
+					list_add_tail(&p->txd_load->node, &head);
+				p->txd_load = NULL;
+			}
+			if (p->txd_done) {
+				list_add_tail(&p->txd_done->node, &head);
+				p->txd_done = NULL;
+			}
+			c->phy = NULL;
+			spin_lock(&d->lock);
+			p->vchan = NULL;
+			spin_unlock(&d->lock);
+			tasklet_schedule(&d->task);
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		sa11x0_dma_desc_free(d, &head);
+		ret = 0;
+		break;
+
+	case DMA_PAUSE:
+		dev_dbg(d->slave.dev, "vchan %p: pause\n", c);
+		spin_lock_irqsave(&c->lock, flags);
+		if (c->status == DMA_IN_PROGRESS) {
+			c->status = DMA_PAUSED;
+
+			p = c->phy;
+			if (p) {
+				writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+			} else {
+				spin_lock(&d->lock);
+				list_del_init(&c->node);
+				spin_unlock(&d->lock);
+			}
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		ret = 0;
+		break;
+
+	case DMA_RESUME:
+		dev_dbg(d->slave.dev, "vchan %p: resume\n", c);
+		spin_lock_irqsave(&c->lock, flags);
+		if (c->status == DMA_PAUSED) {
+			c->status = DMA_IN_PROGRESS;
+
+			p = c->phy;
+			if (p) {
+				writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S);
+			} else if (!list_empty(&c->desc_issued)) {
+				spin_lock(&d->lock);
+				list_add_tail(&c->node, &d->chan_pending);
+				spin_unlock(&d->lock);
+			}
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		ret = 0;
+		break;
+
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+struct sa11x0_dma_channel_desc {
+	u32 ddar;
+	const char *name;
+};
+
+#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 }
+static const struct sa11x0_dma_channel_desc chan_desc[] = {
+	CD(Ser0UDCTr, 0),
+	CD(Ser0UDCRc, DDAR_RW),
+	CD(Ser1SDLCTr, 0),
+	CD(Ser1SDLCRc, DDAR_RW),
+	CD(Ser1UARTTr, 0),
+	CD(Ser1UARTRc, DDAR_RW),
+	CD(Ser2ICPTr, 0),
+	CD(Ser2ICPRc, DDAR_RW),
+	CD(Ser3UARTTr, 0),
+	CD(Ser3UARTRc, DDAR_RW),
+	CD(Ser4MCP0Tr, 0),
+	CD(Ser4MCP0Rc, DDAR_RW),
+	CD(Ser4MCP1Tr, 0),
+	CD(Ser4MCP1Rc, DDAR_RW),
+	CD(Ser4SSPTr, 0),
+	CD(Ser4SSPRc, DDAR_RW),
+};
+
+static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev,
+	struct device *dev)
+{
+	unsigned i;
+
+	dmadev->chancnt = ARRAY_SIZE(chan_desc);
+	INIT_LIST_HEAD(&dmadev->channels);
+	dmadev->dev = dev;
+	dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources;
+	dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources;
+	dmadev->device_control = sa11x0_dma_control;
+	dmadev->device_tx_status = sa11x0_dma_tx_status;
+	dmadev->device_issue_pending = sa11x0_dma_issue_pending;
+
+	for (i = 0; i < dmadev->chancnt; i++) {
+		struct sa11x0_dma_chan *c;
+
+		c = kzalloc(sizeof(*c), GFP_KERNEL);
+		if (!c) {
+			dev_err(dev, "no memory for channel %u\n", i);
+			return -ENOMEM;
+		}
+
+		c->chan.device = dmadev;
+		c->status = DMA_IN_PROGRESS;
+		c->ddar = chan_desc[i].ddar;
+		c->name = chan_desc[i].name;
+		spin_lock_init(&c->lock);
+		INIT_LIST_HEAD(&c->desc_submitted);
+		INIT_LIST_HEAD(&c->desc_issued);
+		INIT_LIST_HEAD(&c->node);
+		list_add_tail(&c->chan.device_node, &dmadev->channels);
+	}
+
+	return dma_async_device_register(dmadev);
+}
+
+static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr,
+	void *data)
+{
+	int irq = platform_get_irq(pdev, nr);
+
+	if (irq <= 0)
+		return -ENXIO;
+
+	return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data);
+}
+
+static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr,
+	void *data)
+{
+	int irq = platform_get_irq(pdev, nr);
+	if (irq > 0)
+		free_irq(irq, data);
+}
+
+static void sa11x0_dma_free_channels(struct dma_device *dmadev)
+{
+	struct sa11x0_dma_chan *c, *cn;
+
+	list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) {
+		list_del(&c->chan.device_node);
+		kfree(c);
+	}
+}
+
+static int __devinit sa11x0_dma_probe(struct platform_device *pdev)
+{
+	struct sa11x0_dma_dev *d;
+	struct resource *res;
+	unsigned i;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	spin_lock_init(&d->lock);
+	INIT_LIST_HEAD(&d->chan_pending);
+	INIT_LIST_HEAD(&d->desc_complete);
+
+	d->base = ioremap(res->start, resource_size(res));
+	if (!d->base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d);
+
+	for (i = 0; i < NR_PHY_CHAN; i++) {
+		struct sa11x0_dma_phy *p = &d->phy[i];
+
+		p->dev = d;
+		p->num = i;
+		p->base = d->base + i * DMA_SIZE;
+		writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR |
+			DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB,
+			p->base + DMA_DCSR_C);
+		writel_relaxed(0, p->base + DMA_DDAR);
+
+		ret = sa11x0_dma_request_irq(pdev, i, p);
+		if (ret) {
+			while (i) {
+				i--;
+				sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+			}
+			goto err_irq;
+		}
+	}
+
+	dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
+	d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg;
+	ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev);
+	if (ret) {
+		dev_warn(d->slave.dev, "failed to register slave async device: %d\n",
+			ret);
+		goto err_slave_reg;
+	}
+
+	platform_set_drvdata(pdev, d);
+	return 0;
+
+ err_slave_reg:
+	sa11x0_dma_free_channels(&d->slave);
+	for (i = 0; i < NR_PHY_CHAN; i++)
+		sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+ err_irq:
+	tasklet_kill(&d->task);
+	iounmap(d->base);
+ err_ioremap:
+	kfree(d);
+ err_alloc:
+	return ret;
+}
+
+static int __devexit sa11x0_dma_remove(struct platform_device *pdev)
+{
+	struct sa11x0_dma_dev *d = platform_get_drvdata(pdev);
+	unsigned pch;
+
+	dma_async_device_unregister(&d->slave);
+
+	sa11x0_dma_free_channels(&d->slave);
+	for (pch = 0; pch < NR_PHY_CHAN; pch++)
+		sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]);
+	tasklet_kill(&d->task);
+	iounmap(d->base);
+	kfree(d);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sa11x0_dma_suspend(struct device *dev)
+{
+	struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+	unsigned pch;
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		struct sa11x0_dma_phy *p = &d->phy[pch];
+		u32 dcsr, saved_dcsr;
+
+		dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+		if (dcsr & DCSR_RUN) {
+			writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+			dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+		}
+
+		saved_dcsr &= DCSR_RUN | DCSR_IE;
+		if (dcsr & DCSR_BIU) {
+			p->dbs[0] = readl_relaxed(p->base + DMA_DBSB);
+			p->dbt[0] = readl_relaxed(p->base + DMA_DBTB);
+			p->dbs[1] = readl_relaxed(p->base + DMA_DBSA);
+			p->dbt[1] = readl_relaxed(p->base + DMA_DBTA);
+			saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) |
+				      (dcsr & DCSR_STRTB ? DCSR_STRTA : 0);
+		} else {
+			p->dbs[0] = readl_relaxed(p->base + DMA_DBSA);
+			p->dbt[0] = readl_relaxed(p->base + DMA_DBTA);
+			p->dbs[1] = readl_relaxed(p->base + DMA_DBSB);
+			p->dbt[1] = readl_relaxed(p->base + DMA_DBTB);
+			saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB);
+		}
+		p->dcsr = saved_dcsr;
+
+		writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C);
+	}
+
+	return 0;
+}
+
+static int sa11x0_dma_resume(struct device *dev)
+{
+	struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+	unsigned pch;
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		struct sa11x0_dma_phy *p = &d->phy[pch];
+		struct sa11x0_dma_desc *txd = NULL;
+		u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+		WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN));
+
+		if (p->txd_done)
+			txd = p->txd_done;
+		else if (p->txd_load)
+			txd = p->txd_load;
+
+		if (!txd)
+			continue;
+
+		writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+		writel_relaxed(p->dbs[0], p->base + DMA_DBSA);
+		writel_relaxed(p->dbt[0], p->base + DMA_DBTA);
+		writel_relaxed(p->dbs[1], p->base + DMA_DBSB);
+		writel_relaxed(p->dbt[1], p->base + DMA_DBTB);
+		writel_relaxed(p->dcsr, p->base + DMA_DCSR_S);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops sa11x0_dma_pm_ops = {
+	.suspend_noirq = sa11x0_dma_suspend,
+	.resume_noirq = sa11x0_dma_resume,
+	.freeze_noirq = sa11x0_dma_suspend,
+	.thaw_noirq = sa11x0_dma_resume,
+	.poweroff_noirq = sa11x0_dma_suspend,
+	.restore_noirq = sa11x0_dma_resume,
+};
+
+static struct platform_driver sa11x0_dma_driver = {
+	.driver = {
+		.name	= "sa11x0-dma",
+		.owner	= THIS_MODULE,
+		.pm	= &sa11x0_dma_pm_ops,
+	},
+	.probe		= sa11x0_dma_probe,
+	.remove		= __devexit_p(sa11x0_dma_remove),
+};
+
+bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+	if (chan->device->dev->driver == &sa11x0_dma_driver.driver) {
+		struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+		const char *p = param;
+
+		return !strcmp(c->name, p);
+	}
+	return false;
+}
+EXPORT_SYMBOL(sa11x0_dma_filter_fn);
+
+static int __init sa11x0_dma_init(void)
+{
+	return platform_driver_register(&sa11x0_dma_driver);
+}
+subsys_initcall(sa11x0_dma_init);
+
+static void __exit sa11x0_dma_exit(void)
+{
+	platform_driver_unregister(&sa11x0_dma_driver);
+}
+module_exit(sa11x0_dma_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("SA-11x0 DMA driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sa11x0-dma");
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
index 7eecf69..8ea3b33 100644
--- a/drivers/gpio/gpio-sa1100.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index eeafc30..9d639fa 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -27,6 +27,7 @@
 
 #include <mach/jornada720.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 8b44ddc..58b2244 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -36,7 +36,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
@@ -46,6 +45,11 @@ MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:kart");
 
+struct rpckbd_data {
+	int tx_irq;
+	int rx_irq;
+};
+
 static int rpckbd_write(struct serio *port, unsigned char val)
 {
 	while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
@@ -78,19 +82,21 @@ static irqreturn_t rpckbd_tx(int irq, void *dev_id)
 
 static int rpckbd_open(struct serio *port)
 {
+	struct rpckbd_data *rpckbd = port->port_data;
+
 	/* Reset the keyboard state machine. */
 	iomd_writeb(0, IOMD_KCTRL);
 	iomd_writeb(8, IOMD_KCTRL);
 	iomd_readb(IOMD_KARTRX);
 
-	if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
 		return -EBUSY;
 	}
 
-	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
-		free_irq(IRQ_KEYBOARDRX, port);
+		free_irq(rpckbd->rx_irq, port);
 		return -EBUSY;
 	}
 
@@ -99,8 +105,10 @@ static int rpckbd_open(struct serio *port)
 
 static void rpckbd_close(struct serio *port)
 {
-	free_irq(IRQ_KEYBOARDRX, port);
-	free_irq(IRQ_KEYBOARDTX, port);
+	struct rpckbd_data *rpckbd = port->port_data;
+
+	free_irq(rpckbd->rx_irq, port);
+	free_irq(rpckbd->tx_irq, port);
 }
 
 /*
@@ -109,17 +117,35 @@ static void rpckbd_close(struct serio *port)
  */
 static int __devinit rpckbd_probe(struct platform_device *dev)
 {
+	struct rpckbd_data *rpckbd;
 	struct serio *serio;
+	int tx_irq, rx_irq;
+
+	rx_irq = platform_get_irq(dev, 0);
+	if (rx_irq <= 0)
+		return rx_irq < 0 ? rx_irq : -ENXIO;
+
+	tx_irq = platform_get_irq(dev, 1);
+	if (tx_irq <= 0)
+		return tx_irq < 0 ? tx_irq : -ENXIO;
 
 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!serio)
+	rpckbd = kzalloc(sizeof(*rpckbd), GFP_KERNEL);
+	if (!serio || !rpckbd) {
+		kfree(rpckbd);
+		kfree(serio);
 		return -ENOMEM;
+	}
+
+	rpckbd->rx_irq = rx_irq;
+	rpckbd->tx_irq = tx_irq;
 
 	serio->id.type		= SERIO_8042;
 	serio->write		= rpckbd_write;
 	serio->open		= rpckbd_open;
 	serio->close		= rpckbd_close;
 	serio->dev.parent	= &dev->dev;
+	serio->port_data	= rpckbd;
 	strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
 	strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
 
@@ -131,7 +157,11 @@ static int __devinit rpckbd_probe(struct platform_device *dev)
 static int __devexit rpckbd_remove(struct platform_device *dev)
 {
 	struct serio *serio = platform_get_drvdata(dev);
+	struct rpckbd_data *rpckbd = serio->port_data;
+
 	serio_unregister_port(serio);
+	kfree(rpckbd);
+
 	return 0;
 }
 
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 44fc8b4..5ebabe3 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -24,6 +24,26 @@
 
 #include <asm/hardware/sa1111.h>
 
+#define PS2CR		0x0000
+#define PS2STAT		0x0004
+#define PS2DATA		0x0008
+#define PS2CLKDIV	0x000c
+#define PS2PRECNT	0x0010
+
+#define PS2CR_ENA	0x08
+#define PS2CR_FKD	0x02
+#define PS2CR_FKC	0x01
+
+#define PS2STAT_STP	0x0100
+#define PS2STAT_TXE	0x0080
+#define PS2STAT_TXB	0x0040
+#define PS2STAT_RXF	0x0020
+#define PS2STAT_RXB	0x0010
+#define PS2STAT_ENA	0x0008
+#define PS2STAT_RXP	0x0004
+#define PS2STAT_KBD	0x0002
+#define PS2STAT_KBC	0x0001
+
 struct ps2if {
 	struct serio		*io;
 	struct sa1111_dev	*dev;
@@ -45,22 +65,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id)
 	struct ps2if *ps2if = dev_id;
 	unsigned int scancode, flag, status;
 
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	while (status & PS2STAT_RXF) {
 		if (status & PS2STAT_STP)
-			sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT);
+			sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT);
 
 		flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
 		       (status & PS2STAT_RXP ? 0 : SERIO_PARITY);
 
-		scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff;
+		scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff;
 
 		if (hweight8(scancode) & 1)
 			flag ^= SERIO_PARITY;
 
 		serio_interrupt(ps2if->io, scancode, flag);
 
-		status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+		status = sa1111_readl(ps2if->base + PS2STAT);
         }
 
         return IRQ_HANDLED;
@@ -75,12 +95,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	unsigned int status;
 
 	spin_lock(&ps2if->lock);
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	if (ps2if->head == ps2if->tail) {
 		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
-		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
+		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA);
 		ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
 	}
 	spin_unlock(&ps2if->lock);
@@ -103,8 +123,8 @@ static int ps2_write(struct serio *io, unsigned char val)
 	/*
 	 * If the TX register is empty, we can go straight out.
 	 */
-	if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) {
-		sa1111_writel(val, ps2if->base + SA1111_PS2DATA);
+	if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) {
+		sa1111_writel(val, ps2if->base + PS2DATA);
 	} else {
 		if (ps2if->head == ps2if->tail)
 			enable_irq(ps2if->dev->irq[1]);
@@ -124,13 +144,16 @@ static int ps2_open(struct serio *io)
 	struct ps2if *ps2if = io->port_data;
 	int ret;
 
-	sa1111_enable_device(ps2if->dev);
+	ret = sa1111_enable_device(ps2if->dev);
+	if (ret)
+		return ret;
 
 	ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0,
 			  SA1111_DRIVER_NAME(ps2if->dev), ps2if);
 	if (ret) {
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[0], ret);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -140,6 +163,7 @@ static int ps2_open(struct serio *io)
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[1], ret);
 		free_irq(ps2if->dev->irq[0], ps2if);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -147,7 +171,7 @@ static int ps2_open(struct serio *io)
 
 	enable_irq_wake(ps2if->dev->irq[0]);
 
-	sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR);
 	return 0;
 }
 
@@ -155,7 +179,7 @@ static void ps2_close(struct serio *io)
 {
 	struct ps2if *ps2if = io->port_data;
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	disable_irq_wake(ps2if->dev->irq[0]);
 
@@ -175,7 +199,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if)
 	int maxread = 100;
 
 	while (maxread--) {
-		if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff)
+		if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff)
 			break;
 	}
 }
@@ -185,11 +209,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
 {
 	unsigned int val;
 
-	sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR);
 
 	udelay(2);
 
-	val = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	val = sa1111_readl(ps2if->base + PS2STAT);
 	return val & (PS2STAT_KBC | PS2STAT_KBD);
 }
 
@@ -220,7 +244,7 @@ static int __devinit ps2_test(struct ps2if *ps2if)
 		ret = -ENODEV;
 	}
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	return ret;
 }
@@ -274,8 +298,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev)
 	sa1111_enable_device(ps2if->dev);
 
 	/* Incoming clock is 8MHz */
-	sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV);
-	sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT);
+	sa1111_writel(0, ps2if->base + PS2CLKDIV);
+	sa1111_writel(127, ps2if->base + PS2PRECNT);
 
 	/*
 	 * Flush any pending input.
@@ -330,6 +354,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev)
 static struct sa1111_driver ps2_driver = {
 	.drv = {
 		.name	= "sa1111-ps2",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_PS2,
 	.probe		= ps2_probe,
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index c3848ad..d9be6ea 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1489c35..243e0c6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -848,8 +848,9 @@ config MCP_SA11X0
 
 # Chip drivers
 config MCP_UCB1200
-	tristate "Support for UCB1200 / UCB1300"
-	depends on MCP
+	bool "Support for UCB1200 / UCB1300"
+	depends on MCP_SA11X0
+	select MCP
 
 config MCP_UCB1200_TS
 	tristate "Touchscreen interface support"
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 86cc3f7..6acf2e0 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -19,7 +19,6 @@
 #include <linux/string.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <asm/system.h>
 
 
@@ -48,39 +47,11 @@ static int mcp_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mcp_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->suspend(mcp, state);
-	}
-	return ret;
-}
-
-static int mcp_bus_resume(struct device *dev)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->resume(mcp);
-	}
-	return ret;
-}
-
 static struct bus_type mcp_bus_type = {
 	.name		= "mcp",
 	.match		= mcp_bus_match,
 	.probe		= mcp_bus_probe,
 	.remove		= mcp_bus_remove,
-	.suspend	= mcp_bus_suspend,
-	.resume		= mcp_bus_resume,
 };
 
 /**
@@ -208,6 +179,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 	mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL);
 	if (mcp) {
 		spin_lock_init(&mcp->lock);
+		device_initialize(&mcp->attached_device);
 		mcp->attached_device.parent = parent;
 		mcp->attached_device.bus = &mcp_bus_type;
 		mcp->attached_device.dma_mask = parent->dma_mask;
@@ -217,18 +189,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 }
 EXPORT_SYMBOL(mcp_host_alloc);
 
-int mcp_host_register(struct mcp *mcp)
+int mcp_host_add(struct mcp *mcp, void *pdata)
 {
+	mcp->attached_device.platform_data = pdata;
 	dev_set_name(&mcp->attached_device, "mcp0");
-	return device_register(&mcp->attached_device);
+	return device_add(&mcp->attached_device);
+}
+EXPORT_SYMBOL(mcp_host_add);
+
+void mcp_host_del(struct mcp *mcp)
+{
+	device_del(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_register);
+EXPORT_SYMBOL(mcp_host_del);
 
-void mcp_host_unregister(struct mcp *mcp)
+void mcp_host_free(struct mcp *mcp)
 {
-	device_unregister(&mcp->attached_device);
+	put_device(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_unregister);
+EXPORT_SYMBOL(mcp_host_free);
 
 int mcp_driver_register(struct mcp_driver *mcpdrv)
 {
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 02c53a0..1c0ceac 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -13,51 +13,61 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <mach/mcp.h>
 
-#include <mach/assabet.h>
-
+#define DRIVER_NAME "sa11x0-mcp"
 
 struct mcp_sa11x0 {
-	u32	mccr0;
-	u32	mccr1;
+	void __iomem	*base0;
+	void __iomem	*base1;
+	u32		mccr0;
+	u32		mccr1;
 };
 
+/* Register offsets */
+#define MCCR0(m)	((m)->base0 + 0x00)
+#define MCDR0(m)	((m)->base0 + 0x08)
+#define MCDR1(m)	((m)->base0 + 0x0c)
+#define MCDR2(m)	((m)->base0 + 0x10)
+#define MCSR(m)		((m)->base0 + 0x18)
+#define MCCR1(m)	((m)->base1 + 0x00)
+
 #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
 
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x00007f00;
-	mccr0 |= divisor << 8;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x00007f00;
+	m->mccr0 |= divisor << 8;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x0000007f;
-	mccr0 |= divisor;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x0000007f;
+	m->mccr0 |= divisor;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -69,14 +79,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 static void
 mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
+	writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CWC) {
+		if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
 			ret = 0;
 			break;
 		}
@@ -95,15 +106,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 static unsigned int
 mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Rd;
+	writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CRC) {
-			ret = Ser4MCDR2 & 0xffff;
+		if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
+			ret = readl_relaxed(MCDR2(m)) & 0xffff;
 			break;
 		}
 	}
@@ -116,13 +128,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-	Ser4MCSR = -1;
-	Ser4MCCR0 |= MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	writel(-1, MCSR(m));
+	m->mccr0 |= MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	m->mccr0 &= ~MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -137,55 +155,64 @@ static struct mcp_ops mcp_sa11x0 = {
 	.disable		= mcp_sa11x0_disable,
 };
 
-static int mcp_sa11x0_probe(struct platform_device *pdev)
+static int mcp_sa11x0_probe(struct platform_device *dev)
 {
-	struct mcp_plat_data *data = pdev->dev.platform_data;
+	struct mcp_plat_data *data = dev->dev.platform_data;
+	struct resource *mem0, *mem1;
+	struct mcp_sa11x0 *m;
 	struct mcp *mcp;
 	int ret;
 
 	if (!data)
 		return -ENODEV;
 
-	if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
-		return -EBUSY;
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!mem0 || !mem1)
+		return -ENXIO;
+
+	if (!request_mem_region(mem0->start, resource_size(mem0),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem0;
+	}
 
-	mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
+	if (!request_mem_region(mem1->start, resource_size(mem1),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem1;
+	}
+
+	mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
 	if (!mcp) {
 		ret = -ENOMEM;
-		goto release;
+		goto err_alloc;
 	}
 
 	mcp->owner		= THIS_MODULE;
 	mcp->ops		= &mcp_sa11x0;
 	mcp->sclk_rate		= data->sclk_rate;
-	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
-	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
-	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
-	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
-	mcp->gpio_base		= data->gpio_base;
 
-	platform_set_drvdata(pdev, mcp);
+	m = priv(mcp);
+	m->mccr0 = data->mccr0 | 0x7f7f;
+	m->mccr1 = data->mccr1;
 
-	if (machine_is_assabet()) {
-		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	m->base0 = ioremap(mem0->start, resource_size(mem0));
+	m->base1 = ioremap(mem1->start, resource_size(mem1));
+	if (!m->base0 || !m->base1) {
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	platform_set_drvdata(dev, mcp);
 
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.
 	 */
-	Ser4MCSR = -1;
-	Ser4MCCR1 = data->mccr1;
-	Ser4MCCR0 = data->mccr0 | 0x7f7f;
+	writel_relaxed(-1, MCSR(m));
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	/*
 	 * Calculate the read/write timeout (us) from the bit clock
@@ -195,62 +222,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
 			  mcp->sclk_rate;
 
-	ret = mcp_host_register(mcp);
+	ret = mcp_host_add(mcp, data->codec_pdata);
 	if (ret == 0)
-		goto out;
+		return 0;
 
- release:
-	release_mem_region(0x80060000, 0x60);
-	platform_set_drvdata(pdev, NULL);
+	platform_set_drvdata(dev, NULL);
 
- out:
+ err_ioremap:
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+ err_alloc:
+	release_mem_region(mem1->start, resource_size(mem1));
+ err_mem1:
+	release_mem_region(mem0->start, resource_size(mem0));
+ err_mem0:
 	return ret;
 }
 
 static int mcp_sa11x0_remove(struct platform_device *dev)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(mcp);
+	struct resource *mem0, *mem1;
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(&dev->dev,
+			 "device left active (missing disable call?)\n");
+
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
 
 	platform_set_drvdata(dev, NULL);
-	mcp_host_unregister(mcp);
-	release_mem_region(0x80060000, 0x60);
+	mcp_host_del(mcp);
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+	release_mem_region(mem1->start, resource_size(mem1));
+	release_mem_region(mem0->start, resource_size(mem0));
 
 	return 0;
 }
 
-static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int mcp_sa11x0_suspend(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(dev, "device left active (missing disable call?)\n");
 
-	priv(mcp)->mccr0 = Ser4MCCR0;
-	priv(mcp)->mccr1 = Ser4MCCR1;
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
 
 	return 0;
 }
 
-static int mcp_sa11x0_resume(struct platform_device *dev)
+static int mcp_sa11x0_resume(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
 
-	Ser4MCCR1 = priv(mcp)->mccr1;
-	Ser4MCCR0 = priv(mcp)->mccr0;
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	return 0;
 }
-
-/*
- * The driver for the SA11x0 MCP port.
- */
-MODULE_ALIAS("platform:sa11x0-mcp");
+#endif
+
+static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend = mcp_sa11x0_suspend,
+	.freeze = mcp_sa11x0_suspend,
+	.poweroff = mcp_sa11x0_suspend,
+	.resume_noirq = mcp_sa11x0_resume,
+	.thaw_noirq = mcp_sa11x0_resume,
+	.restore_noirq = mcp_sa11x0_resume,
+#endif
+};
 
 static struct platform_driver mcp_sa11x0_driver = {
 	.probe		= mcp_sa11x0_probe,
 	.remove		= mcp_sa11x0_remove,
-	.suspend	= mcp_sa11x0_suspend,
-	.resume		= mcp_sa11x0_resume,
 	.driver		= {
-		.name	= "sa11x0-mcp",
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &mcp_sa11x0_pm_ops,
 	},
 };
 
@@ -259,6 +314,7 @@ static struct platform_driver mcp_sa11x0_driver = {
  */
 module_platform_driver(mcp_sa11x0_driver);
 
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index cea9da6..b63c075 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -11,14 +11,15 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-#include <linux/device.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
-
-
 #define UCB1X00_ATTR(name,input)\
 static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
 			   char *buf)	\
@@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2);
 
 static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
 {
-	device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
-	device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
-	device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
+	struct ucb1x00 *ucb = dev->ucb;
+	struct platform_device *pdev;
+	struct gpio_keys_platform_data keys;
+	static struct gpio_keys_button buttons[6];
+	unsigned i;
+
+	memset(buttons, 0, sizeof(buttons));
+	memset(&keys, 0, sizeof(keys));
+
+	for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+		buttons[i].code = BTN_0 + i;
+		buttons[i].gpio = ucb->gpio.base + i;
+		buttons[i].type = EV_KEY;
+		buttons[i].can_disable = true;
+	}
+
+	keys.buttons = buttons;
+	keys.nbuttons = ARRAY_SIZE(buttons);
+	keys.poll_interval = 50;
+	keys.name = "ucb1x00";
+
+	pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1,
+		&keys, sizeof(keys));
+
+	device_create_file(&ucb->dev, &dev_attr_vbatt);
+	device_create_file(&ucb->dev, &dev_attr_vcharger);
+	device_create_file(&ucb->dev, &dev_attr_batt_temp);
+
+	dev->priv = pdev;
 	return 0;
 }
 
 static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
 {
+	struct platform_device *pdev = dev->priv;
+
+	if (!IS_ERR(pdev))
+		platform_device_unregister(pdev);
+
 	device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index febc90c..70f02da 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -23,14 +23,12 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/mfd/ucb1x00.h>
+#include <linux/pm.h>
 #include <linux/gpio.h>
-#include <linux/semaphore.h>
-
-#include <mach/dma.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
@@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
  *	ucb1x00_enable must have been called to enable the comms
  *	before using this function.
  *
- *	This function does not take any semaphores or spinlocks.
+ *	This function does not take any mutexes or spinlocks.
  */
 unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
 {
@@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	else
 		ucb->io_out &= ~(1 << offset);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 }
 
 static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
-	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+	unsigned val;
+
+	ucb1x00_enable(ucb);
+	val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
+	ucb1x00_disable(ucb);
+
+	return val & (1 << offset);
 }
 
 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 
 	spin_lock_irqsave(&ucb->io_lock, flags);
 	ucb->io_dir &= ~(1 << offset);
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
@@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 	else
 		ucb->io_out &= ~mask;
 
+	ucb1x00_enable(ucb);
 	if (old != ucb->io_out)
 		ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 
@@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 		ucb->io_dir |= mask;
 		ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	}
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
 }
 
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+
+	return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
 /*
  * UCB1300 data sheet says we must:
  *  1. enable ADC	=> 5us (including reference startup time)
@@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  *	Any code wishing to use the ADC converter must call this
  *	function prior to using it.
  *
- *	This function takes the ADC semaphore to prevent two or more
+ *	This function takes the ADC mutex to prevent two or more
  *	concurrent uses, and therefore may sleep.  As a result, it
  *	can only be called from process context, not interrupt
  *	context.
@@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  */
 void ucb1x00_adc_enable(struct ucb1x00 *ucb)
 {
-	down(&ucb->adc_sem);
+	mutex_lock(&ucb->adc_mutex);
 
 	ucb->adc_cr |= UCB_ADC_ENA;
 
@@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb)
  *	complete (2 frames max without sync).
  *
  *	If called for a synchronised ADC conversion, it may sleep
- *	with the ADC semaphore held.
+ *	with the ADC mutex held.
  */
 unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
 {
@@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
  *	ucb1x00_adc_disable - disable the ADC converter
  *	@ucb: UCB1x00 structure describing chip
  *
- *	Disable the ADC converter and release the ADC semaphore.
+ *	Disable the ADC converter and release the ADC mutex.
  */
 void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 {
@@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 	ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
 	ucb1x00_disable(ucb);
 
-	up(&ucb->adc_sem);
+	mutex_unlock(&ucb->adc_mutex);
 }
 
 /*
@@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
  * SIBCLK to talk to the chip.  We leave the clock running until
  * we have finished processing all interrupts from the chip.
  */
-static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
+static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
 {
-	struct ucb1x00 *ucb = devid;
-	struct ucb1x00_irq *irq;
+	struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
 	unsigned int isr, i;
 
 	ucb1x00_enable(ucb);
@@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
 
-	for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
-		if (isr & 1 && irq->fn)
-			irq->fn(i, irq->devid);
+	for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
+		if (isr & 1)
+			generic_handle_irq(ucb->irq_base + i);
 	ucb1x00_disable(ucb);
-
-	return IRQ_HANDLED;
 }
 
-/**
- *	ucb1x00_hook_irq - hook a UCB1x00 interrupt
- *	@ucb:   UCB1x00 structure describing chip
- *	@idx:   interrupt index
- *	@fn:    function to call when interrupt is triggered
- *	@devid: device id to pass to interrupt handler
- *
- *	Hook the specified interrupt.  You can only register one handler
- *	for each interrupt source.  The interrupt source is not enabled
- *	by this function; use ucb1x00_enable_irq instead.
- *
- *	Interrupt handlers will be called with other interrupts enabled.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -EBUSY if the interrupt has already been hooked
- */
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
 {
-	struct ucb1x00_irq *irq;
-	int ret = -EINVAL;
-
-	if (idx < 16) {
-		irq = ucb->irq_handler + idx;
-		ret = -EBUSY;
-
-		spin_lock_irq(&ucb->lock);
-		if (irq->fn == NULL) {
-			irq->devid = devid;
-			irq->fn = fn;
-			ret = 0;
-		}
-		spin_unlock_irq(&ucb->lock);
-	}
-	return ret;
+	ucb1x00_enable(ucb);
+	if (ucb->irq_ris_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+	if (ucb->irq_fal_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	ucb1x00_disable(ucb);
 }
 
-/**
- *	ucb1x00_enable_irq - enable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@edges: interrupt edges to enable
- *
- *	Enable the specified interrupt to trigger on %UCB_RISING,
- *	%UCB_FALLING or both edges.  The interrupt should have been
- *	hooked by ucb1x00_hook_irq.
- */
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_noop(struct irq_data *data)
 {
-	unsigned long flags;
+}
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
+static void ucb1x00_irq_mask(struct irq_data *data)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask &= ~mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_disable_irq - disable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@edges: interrupt edges to disable
- *
- *	Disable the specified interrupt triggering on the specified
- *	(%UCB_RISING, %UCB_FALLING or both) edges.
- */
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_unmask(struct irq_data *data)
 {
-	unsigned long flags;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
-
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask |= mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@devid: device id.
- *
- *	Disable the interrupt source and remove the handler.  devid must
- *	match the devid passed when hooking the interrupt.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -ENOENT if devid does not match
- */
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
 {
-	struct ucb1x00_irq *irq;
-	int ret;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx >= 16)
-		goto bad;
+	raw_spin_lock(&ucb->irq_lock);
+	if (type & IRQ_TYPE_EDGE_RISING)
+		ucb->irq_ris_enbl |= mask;
+	else
+		ucb->irq_ris_enbl &= ~mask;
 
-	irq = ucb->irq_handler + idx;
-	ret = -ENOENT;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		ucb->irq_fal_enbl |= mask;
+	else
+		ucb->irq_fal_enbl &= ~mask;
+	if (ucb->irq_mask & mask) {
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	}
+	raw_spin_unlock(&ucb->irq_lock);
 
-	spin_lock_irq(&ucb->lock);
-	if (irq->devid == devid) {
-		ucb->irq_ris_enbl &= ~(1 << idx);
-		ucb->irq_fal_enbl &= ~(1 << idx);
+	return 0;
+}
 
-		ucb1x00_enable(ucb);
-		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		ucb1x00_disable(ucb);
+static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		irq->fn = NULL;
-		irq->devid = NULL;
-		ret = 0;
-	}
-	spin_unlock_irq(&ucb->lock);
-	return ret;
+	if (!pdata || !pdata->can_wakeup)
+		return -EINVAL;
 
-bad:
-	printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
-	return -EINVAL;
+	raw_spin_lock(&ucb->irq_lock);
+	if (on)
+		ucb->irq_wake |= mask;
+	else
+		ucb->irq_wake &= ~mask;
+	raw_spin_unlock(&ucb->irq_lock);
+
+	return 0;
 }
 
+static struct irq_chip ucb1x00_irqchip = {
+	.name = "ucb1x00",
+	.irq_ack = ucb1x00_irq_noop,
+	.irq_mask = ucb1x00_irq_mask,
+	.irq_unmask = ucb1x00_irq_unmask,
+	.irq_set_type = ucb1x00_irq_set_type,
+	.irq_set_wake = ucb1x00_irq_set_wake,
+};
+
 static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 {
 	struct ucb1x00_dev *dev;
@@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 		ret = drv->add(dev);
 
 		if (ret == 0) {
-			list_add(&dev->dev_node, &ucb->devs);
-			list_add(&dev->drv_node, &drv->devs);
+			list_add_tail(&dev->dev_node, &ucb->devs);
+			list_add_tail(&dev->drv_node, &drv->devs);
 		} else {
 			kfree(dev);
 		}
@@ -533,98 +496,126 @@ static struct class ucb1x00_class = {
 
 static int ucb1x00_probe(struct mcp *mcp)
 {
-	struct ucb1x00 *ucb;
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00_driver *drv;
-	unsigned int id;
+	struct ucb1x00 *ucb;
+	unsigned id, i, irq_base;
 	int ret = -ENODEV;
-	int temp;
+
+	/* Tell the platform to deassert the UCB1x00 reset */
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE);
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
+	mcp_disable(mcp);
 
 	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
-		goto err_disable;
+		goto out;
 	}
 
 	ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
 	ret = -ENOMEM;
 	if (!ucb)
-		goto err_disable;
-
+		goto out;
 
+	device_initialize(&ucb->dev);
 	ucb->dev.class = &ucb1x00_class;
 	ucb->dev.parent = &mcp->attached_device;
 	dev_set_name(&ucb->dev, "ucb1x00");
 
-	spin_lock_init(&ucb->lock);
+	raw_spin_lock_init(&ucb->irq_lock);
 	spin_lock_init(&ucb->io_lock);
-	sema_init(&ucb->adc_sem, 1);
+	mutex_init(&ucb->adc_mutex);
 
 	ucb->id  = id;
 	ucb->mcp = mcp;
+
+	ret = device_add(&ucb->dev);
+	if (ret)
+		goto err_dev_add;
+
+	ucb1x00_enable(ucb);
 	ucb->irq = ucb1x00_detect_irq(ucb);
+	ucb1x00_disable(ucb);
 	if (ucb->irq == NO_IRQ) {
-		printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
+		dev_err(&ucb->dev, "IRQ probe failed\n");
 		ret = -ENODEV;
-		goto err_free;
+		goto err_no_irq;
 	}
 
 	ucb->gpio.base = -1;
-	if (mcp->gpio_base != 0) {
+	irq_base = pdata ? pdata->irq_base : 0;
+	ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+	if (ucb->irq_base < 0) {
+		dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+			ucb->irq_base);
+		goto err_irq_alloc;
+	}
+
+	for (i = 0; i < 16; i++) {
+		unsigned irq = ucb->irq_base + i;
+
+		irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+		irq_set_chip_data(irq, ucb);
+		set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
+	}
+
+	irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, ucb1x00_irq);
+
+	if (pdata && pdata->gpio_base) {
 		ucb->gpio.label = dev_name(&ucb->dev);
-		ucb->gpio.base = mcp->gpio_base;
+		ucb->gpio.dev = &ucb->dev;
+		ucb->gpio.owner = THIS_MODULE;
+		ucb->gpio.base = pdata->gpio_base;
 		ucb->gpio.ngpio = 10;
 		ucb->gpio.set = ucb1x00_gpio_set;
 		ucb->gpio.get = ucb1x00_gpio_get;
 		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
 		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+		ucb->gpio.to_irq = ucb1x00_to_irq;
 		ret = gpiochip_add(&ucb->gpio);
 		if (ret)
-			goto err_free;
+			goto err_gpio_add;
 	} else
 		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
 
-	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-			  "UCB1x00", ucb);
-	if (ret) {
-		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
-			ucb->irq, ret);
-		goto err_gpio;
-	}
-
 	mcp_set_drvdata(mcp, ucb);
 
-	ret = device_register(&ucb->dev);
-	if (ret)
-		goto err_irq;
-
+	if (pdata)
+		device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
 
 	INIT_LIST_HEAD(&ucb->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&ucb->node, &ucb1x00_devices);
+	list_add_tail(&ucb->node, &ucb1x00_devices);
 	list_for_each_entry(drv, &ucb1x00_drivers, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 
-	goto out;
+	return ret;
 
- err_irq:
-	free_irq(ucb->irq, ucb);
- err_gpio:
-	if (ucb->gpio.base != -1)
-		temp = gpiochip_remove(&ucb->gpio);
- err_free:
-	kfree(ucb);
- err_disable:
-	mcp_disable(mcp);
+ err_gpio_add:
+	irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+	if (ucb->irq_base > 0)
+		irq_free_descs(ucb->irq_base, 16);
+ err_no_irq:
+	device_del(&ucb->dev);
+ err_dev_add:
+	put_device(&ucb->dev);
  out:
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE_FAIL);
 	return ret;
 }
 
 static void ucb1x00_remove(struct mcp *mcp)
 {
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct list_head *l, *n;
 	int ret;
@@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp)
 			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
 	}
 
-	free_irq(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, NULL);
+	irq_free_descs(ucb->irq_base, 16);
 	device_unregister(&ucb->dev);
+
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_REMOVE);
 }
 
 int ucb1x00_register_driver(struct ucb1x00_driver *drv)
@@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv)
 
 	INIT_LIST_HEAD(&drv->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&drv->node, &ucb1x00_drivers);
+	list_add_tail(&drv->node, &ucb1x00_drivers);
 	list_for_each_entry(ucb, &ucb1x00_devices, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
@@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
 	mutex_unlock(&ucb1x00_mutex);
 }
 
-static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
+static int ucb1x00_suspend(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
 
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->suspend)
-			dev->drv->suspend(dev, state);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->suspend)
+			udev->drv->suspend(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_enable(ucb);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_wake);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_wake);
+		ucb1x00_disable(ucb);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		enable_irq_wake(ucb->irq);
+	} else if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_SUSPEND);
+
 	return 0;
 }
 
-static int ucb1x00_resume(struct mcp *mcp)
+static int ucb1x00_resume(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
+
+	if (!ucb->irq_wake && pdata && pdata->reset)
+		pdata->reset(UCB_RST_RESUME);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		disable_irq_wake(ucb->irq);
+	}
+	ucb1x00_disable(ucb);
+
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->resume)
-			dev->drv->resume(dev);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->resume)
+			udev->drv->resume(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 	return 0;
 }
 
+static const struct dev_pm_ops ucb1x00_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
+};
+
 static struct mcp_driver ucb1x00_driver = {
 	.drv		= {
 		.name	= "ucb1x00",
+		.owner	= THIS_MODULE,
+		.pm	= &ucb1x00_pm_ops,
 	},
 	.probe		= ucb1x00_probe,
 	.remove		= ucb1x00_remove,
-	.suspend	= ucb1x00_suspend,
-	.resume		= ucb1x00_resume,
 };
 
 static int __init ucb1x00_init(void)
@@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable);
 EXPORT_SYMBOL(ucb1x00_adc_read);
 EXPORT_SYMBOL(ucb1x00_adc_disable);
 
-EXPORT_SYMBOL(ucb1x00_hook_irq);
-EXPORT_SYMBOL(ucb1x00_free_irq);
-EXPORT_SYMBOL(ucb1x00_enable_irq);
-EXPORT_SYMBOL(ucb1x00_disable_irq);
-
 EXPORT_SYMBOL(ucb1x00_register_driver);
 EXPORT_SYMBOL(ucb1x00_unregister_driver);
 
+MODULE_ALIAS("mcp:ucb1x00");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("UCB1x00 core driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 63a3cbd..1e0e20c 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -20,8 +20,9 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
-#include <linux/smp.h>
+#include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/string.h>
@@ -32,7 +33,6 @@
 #include <linux/kthread.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
@@ -42,6 +42,8 @@ struct ucb1x00_ts {
 	struct input_dev	*idev;
 	struct ucb1x00		*ucb;
 
+	spinlock_t		irq_lock;
+	unsigned		irq_disabled;
 	wait_queue_head_t	irq_wait;
 	struct task_struct	*rtask;
 	u16			x_res;
@@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts)
 		if (ucb1x00_ts_pen_down(ts)) {
 			set_current_state(TASK_INTERRUPTIBLE);
 
-			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+			spin_lock_irq(&ts->irq_lock);
+			if (ts->irq_disabled) {
+				ts->irq_disabled = 0;
+				enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX);
+			}
+			spin_unlock_irq(&ts->irq_lock);
 			ucb1x00_disable(ts->ucb);
 
 			/*
@@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts)
  * We only detect touch screen _touches_ with this interrupt
  * handler, and even then we just schedule our task.
  */
-static void ucb1x00_ts_irq(int idx, void *id)
+static irqreturn_t ucb1x00_ts_irq(int irq, void *id)
 {
 	struct ucb1x00_ts *ts = id;
 
-	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+	spin_lock(&ts->irq_lock);
+	ts->irq_disabled = 1;
+	disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX);
+	spin_unlock(&ts->irq_lock);
 	wake_up(&ts->irq_wait);
+
+	return IRQ_HANDLED;
 }
 
 static int ucb1x00_ts_open(struct input_dev *idev)
 {
 	struct ucb1x00_ts *ts = input_get_drvdata(idev);
+	unsigned long flags = 0;
 	int ret = 0;
 
 	BUG_ON(ts->rtask);
 
+	if (machine_is_collie())
+		flags = IRQF_TRIGGER_RISING;
+	else
+		flags = IRQF_TRIGGER_FALLING;
+
+	ts->irq_disabled = 0;
+
 	init_waitqueue_head(&ts->irq_wait);
-	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+	ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq,
+			  flags, "ucb1x00-ts", ts);
 	if (ret < 0)
 		goto out;
 
@@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev)
 	if (!IS_ERR(ts->rtask)) {
 		ret = 0;
 	} else {
-		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+		free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 		ts->rtask = NULL;
 		ret = -EFAULT;
 	}
@@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev)
 		kthread_stop(ts->rtask);
 
 	ucb1x00_enable(ts->ucb);
-	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+	free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
 	ucb1x00_disable(ts->ucb);
 }
@@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
 	ts->ucb = dev->ucb;
 	ts->idev = idev;
 	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
+	spin_lock_init(&ts->irq_lock);
 
 	idev->name       = "Touchscreen panel";
 	idev->id.product = ts->ucb->id;
 	idev->open       = ucb1x00_ts_open;
 	idev->close      = ucb1x00_ts_close;
+	idev->dev.parent = &ts->ucb->dev;
 
 	idev->evbit[0]   = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
 	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 5028219..cbc3b78 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -23,106 +23,6 @@
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
 
-#if 0
-/*
- * This is here for documentation purposes only - until these people
- * submit their machine types.  It will be gone January 2005.
- */
-static struct mtd_partition consus_partitions[] = {
-	{
-		.name		= "Consus boot firmware",
-		.offset		= 0,
-		.size		= 0x00040000,
-		.mask_flags	= MTD_WRITABLE, /* force read-only */
-	}, {
-		.name		= "Consus kernel",
-		.offset		= 0x00040000,
-		.size		= 0x00100000,
-		.mask_flags	= 0,
-	}, {
-		.name		= "Consus disk",
-		.offset		= 0x00140000,
-		/* The rest (up to 16M) for jffs.  We could put 0 and
-		   make it find the size automatically, but right now
-		   i have 32 megs.  jffs will use all 32 megs if given
-		   the chance, and this leads to horrible problems
-		   when you try to re-flash the image because blob
-		   won't erase the whole partition. */
-		.size		= 0x01000000 - 0x00140000,
-		.mask_flags	= 0,
-	}, {
-		/* this disk is a secondary disk, which can be used as
-		   needed, for simplicity, make it the size of the other
-		   consus partition, although realistically it could be
-		   the remainder of the disk (depending on the file
-		   system used) */
-		 .name		= "Consus disk2",
-		 .offset	= 0x01000000,
-		 .size		= 0x01000000 - 0x00140000,
-		 .mask_flags	= 0,
-	}
-};
-
-/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
-static struct mtd_partition frodo_partitions[] =
-{
-	{
-		.name		= "bootloader",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "bootloader params",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "ramdisk",
-		.size		= 0x00400000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "file system",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND
-	}
-};
-
-static struct mtd_partition jornada56x_partitions[] = {
-	{
-		.name		= "bootldr",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static void jornada56x_set_vpp(int vpp)
-{
-	if (vpp)
-		GPSR = GPIO_GPIO26;
-	else
-		GPCR = GPIO_GPIO26;
-	GPDR |= GPIO_GPIO26;
-}
-
-/*
- * Machine        Phys          Size    set_vpp
- * Consus    : SA1100_CS0_PHYS SZ_32M
- * Frodo     : SA1100_CS0_PHYS SZ_32M
- * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
- */
-#endif
-
 struct sa_subdev_info {
 	char name[16];
 	struct map_info map;
@@ -373,21 +273,9 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static void sa1100_mtd_shutdown(struct platform_device *dev)
-{
-	struct sa_info *info = platform_get_drvdata(dev);
-	if (info && mtd_suspend(info->mtd) == 0)
-		mtd_resume(info->mtd);
-}
-#else
-#define sa1100_mtd_shutdown NULL
-#endif
-
 static struct platform_driver sa1100_mtd_driver = {
 	.probe		= sa1100_mtd_probe,
 	.remove		= __exit_p(sa1100_mtd_remove),
-	.shutdown	= sa1100_mtd_shutdown,
 	.driver		= {
 		.name	= "sa1100-mtd",
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 1dc4fad..fee4493 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2280,7 +2280,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_release_io;
 #if defined(CONFIG_SA1100_ASSABET)
-	NCR_0 |= NCR_ENET_OSC_EN;
+	neponset_ncr_set(NCR_ENET_OSC_EN);
 #endif
 	platform_set_drvdata(pdev, ndev);
 	ret = smc_enable_device(pdev);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index e535137..4680478 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -356,7 +356,7 @@ config VLSI_FIR
 
 config SA1100_FIR
 	tristate "SA1100 Internal IR"
-	depends on ARCH_SA1100 && IRDA
+	depends on ARCH_SA1100 && IRDA && DMA_SA11X0
 
 config VIA_FIR
 	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index da27050..a0d1913 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -15,7 +15,7 @@
  *  This driver takes one kernel command line parameter, sa1100ir=, with
  *  the following options:
  *	max_rate:baudrate	- set the maximum baud rate
- *	power_leve:level	- set the transmitter power level
+ *	power_level:level	- set the transmitter power level
  *	tx_lpm:0|1		- set transmit low power mode
  */
 #include <linux/module.h>
@@ -30,13 +30,13 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sa11x0-dma.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/wrapper.h>
 #include <net/irda/irda_device.h>
 
-#include <asm/irq.h>
-#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
@@ -44,8 +44,15 @@ static int power_level = 3;
 static int tx_lpm;
 static int max_rate = 4000000;
 
+struct sa1100_buf {
+	struct device		*dev;
+	struct sk_buff		*skb;
+	struct scatterlist	sg;
+	struct dma_chan		*chan;
+	dma_cookie_t		cookie;
+};
+
 struct sa1100_irda {
-	unsigned char		hscr0;
 	unsigned char		utcr4;
 	unsigned char		power;
 	unsigned char		open;
@@ -53,12 +60,8 @@ struct sa1100_irda {
 	int			speed;
 	int			newspeed;
 
-	struct sk_buff		*txskb;
-	struct sk_buff		*rxskb;
-	dma_addr_t		txbuf_dma;
-	dma_addr_t		rxbuf_dma;
-	dma_regs_t		*txdma;
-	dma_regs_t		*rxdma;
+	struct sa1100_buf	dma_rx;
+	struct sa1100_buf	dma_tx;
 
 	struct device		*dev;
 	struct irda_platform_data *pdata;
@@ -67,23 +70,103 @@ struct sa1100_irda {
 
 	iobuff_t		tx_buff;
 	iobuff_t		rx_buff;
+
+	int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
+	irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
 };
 
+static int sa1100_irda_set_speed(struct sa1100_irda *, int);
+
 #define IS_FIR(si)		((si)->speed >= 4000000)
 
 #define HPSIR_MAX_RXLEN		2047
 
+static struct dma_slave_config sa1100_irda_sir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2UTDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 4,
+};
+
+static struct dma_slave_config sa1100_irda_fir_rx = {
+	.direction	= DMA_FROM_DEVICE,
+	.src_addr	= __PREG(Ser2HSDR),
+	.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.src_maxburst	= 8,
+};
+
+static struct dma_slave_config sa1100_irda_fir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2HSDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 8,
+};
+
+static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
+{
+	struct dma_chan *chan = buf->chan;
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = chan->device->device_tx_status(chan, buf->cookie, &state);
+	if (status != DMA_PAUSED)
+		return 0;
+
+	return sg_dma_len(&buf->sg) - state.residue;
+}
+
+static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
+	const char *name, struct dma_slave_config *cfg)
+{
+	dma_cap_mask_t m;
+	int ret;
+
+	dma_cap_zero(m);
+	dma_cap_set(DMA_SLAVE, m);
+
+	buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
+	if (!buf->chan) {
+		dev_err(dev, "unable to request DMA channel for %s\n",
+			name);
+		return -ENOENT;
+	}
+
+	ret = dmaengine_slave_config(buf->chan, cfg);
+	if (ret)
+		dev_warn(dev, "DMA slave_config for %s returned %d\n",
+			name, ret);
+
+	buf->dev = buf->chan->device->dev;
+
+	return 0;
+}
+
+static void sa1100_irda_dma_start(struct sa1100_buf *buf,
+	enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = buf->chan;
+
+	desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (desc) {
+		desc->callback = cb;
+		desc->callback_param = cb_p;
+		buf->cookie = dmaengine_submit(desc);
+		dma_async_issue_pending(chan);
+	}
+}
+
 /*
  * Allocate and map the receive buffer, unless it is already allocated.
  */
 static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
 {
-	if (si->rxskb)
+	if (si->dma_rx.skb)
 		return 0;
 
-	si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
-
-	if (!si->rxskb) {
+	si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+	if (!si->dma_rx.skb) {
 		printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
 		return -ENOMEM;
 	}
@@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
 	 * Align any IP headers that may be contained
 	 * within the frame.
 	 */
-	skb_reserve(si->rxskb, 1);
+	skb_reserve(si->dma_rx.skb, 1);
+
+	sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
+	if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
+		dev_kfree_skb_any(si->dma_rx.skb);
+		return -ENOMEM;
+	}
 
-	si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
-					HPSIR_MAX_RXLEN,
-					DMA_FROM_DEVICE);
 	return 0;
 }
 
@@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
  */
 static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
 {
-	if (!si->rxskb) {
+	if (!si->dma_rx.skb) {
 		printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
 		return;
 	}
@@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
 	/*
 	 * First empty receive FIFO
 	 */
-	Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+	Ser2HSCR0 = HSCR0_HSSP;
 
 	/*
 	 * Enable the DMA, receiver and receive interrupt.
 	 */
-	sa1100_clear_dma(si->rxdma);
-	sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
-	Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
+	dmaengine_terminate_all(si->dma_rx.chan);
+	sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
 }
 
-/*
- * Set the IrDA communications speed.
- */
-static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+static void sa1100_irda_check_speed(struct sa1100_irda *si)
 {
-	unsigned long flags;
-	int brd, ret = -EINVAL;
-
-	switch (speed) {
-	case 9600:	case 19200:	case 38400:
-	case 57600:	case 115200:
-		brd = 3686400 / (16 * speed) - 1;
-
-		/*
-		 * Stop the receive DMA.
-		 */
-		if (IS_FIR(si))
-			sa1100_stop_dma(si->rxdma);
-
-		local_irq_save(flags);
-
-		Ser2UTCR3 = 0;
-		Ser2HSCR0 = HSCR0_UART;
-
-		Ser2UTCR1 = brd >> 8;
-		Ser2UTCR2 = brd;
-
-		/*
-		 * Clear status register
-		 */
-		Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
-		Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
-
-		if (si->pdata->set_speed)
-			si->pdata->set_speed(si->dev, speed);
-
-		si->speed = speed;
-
-		local_irq_restore(flags);
-		ret = 0;
-		break;
-
-	case 4000000:
-		local_irq_save(flags);
-
-		si->hscr0 = 0;
-
-		Ser2HSSR0 = 0xff;
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
-		Ser2UTCR3 = 0;
-
-		si->speed = speed;
-
-		if (si->pdata->set_speed)
-			si->pdata->set_speed(si->dev, speed);
-
-		sa1100_irda_rx_alloc(si);
-		sa1100_irda_rx_dma_start(si);
-
-		local_irq_restore(flags);
-
-		break;
-
-	default:
-		break;
+	if (si->newspeed) {
+		sa1100_irda_set_speed(si, si->newspeed);
+		si->newspeed = 0;
 	}
-
-	return ret;
 }
 
 /*
- * Control the power state of the IrDA transmitter.
- * State:
- *  0 - off
- *  1 - short range, lowest power
- *  2 - medium range, medium power
- *  3 - maximum range, high power
- *
- * Currently, only assabet is known to support this.
+ * HP-SIR format support.
  */
-static int
-__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+static void sa1100_irda_sirtxdma_irq(void *id)
 {
-	int ret = 0;
-	if (si->pdata->set_power)
-		ret = si->pdata->set_power(si->dev, state);
-	return ret;
-}
-
-static inline int
-sa1100_set_power(struct sa1100_irda *si, unsigned int state)
-{
-	int ret;
-
-	ret = __sa1100_irda_set_power(si, state);
-	if (ret == 0)
-		si->power = state;
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
 
-	return ret;
-}
+	dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
+	dev_kfree_skb(si->dma_tx.skb);
+	si->dma_tx.skb = NULL;
 
-static int sa1100_irda_startup(struct sa1100_irda *si)
-{
-	int ret;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
 
-	/*
-	 * Ensure that the ports for this device are setup correctly.
-	 */
-	if (si->pdata->startup)	{
-		ret = si->pdata->startup(si->dev);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * Configure PPC for IRDA - we want to drive TXD2 low.
-	 * We also want to drive this pin low during sleep.
-	 */
-	PPSR &= ~PPC_TXD2;
-	PSDR &= ~PPC_TXD2;
-	PPDR |= PPC_TXD2;
-
-	/*
-	 * Enable HP-SIR modulation, and ensure that the port is disabled.
-	 */
-	Ser2UTCR3 = 0;
-	Ser2HSCR0 = HSCR0_UART;
-	Ser2UTCR4 = si->utcr4;
-	Ser2UTCR0 = UTCR0_8BitData;
-	Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+	/* We need to ensure that the transmitter has finished. */
+	do
+		rmb();
+	while (Ser2UTSR1 & UTSR1_TBY);
 
 	/*
-	 * Clear status register
+	 * Ok, we've finished transmitting.  Now enable the receiver.
+	 * Sometimes we get a receive IRQ immediately after a transmit...
 	 */
 	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+	Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
 
-	ret = sa1100_irda_set_speed(si, si->speed = 9600);
-	if (ret) {
-		Ser2UTCR3 = 0;
-		Ser2HSCR0 = 0;
-
-		if (si->pdata->shutdown)
-			si->pdata->shutdown(si->dev);
-	}
-
-	return ret;
-}
-
-static void sa1100_irda_shutdown(struct sa1100_irda *si)
-{
-	/*
-	 * Stop all DMA activity.
-	 */
-	sa1100_stop_dma(si->rxdma);
-	sa1100_stop_dma(si->txdma);
-
-	/* Disable the port. */
-	Ser2UTCR3 = 0;
-	Ser2HSCR0 = 0;
+	sa1100_irda_check_speed(si);
 
-	if (si->pdata->shutdown)
-		si->pdata->shutdown(si->dev);
+	/* I'm hungry! */
+	netif_wake_queue(dev);
 }
 
-#ifdef CONFIG_PM
-/*
- * Suspend the IrDA interface.
- */
-static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct sa1100_irda *si;
-
-	if (!dev)
-		return 0;
-
-	si = netdev_priv(dev);
-	if (si->open) {
-		/*
-		 * Stop the transmit queue
-		 */
-		netif_device_detach(dev);
-		disable_irq(dev->irq);
-		sa1100_irda_shutdown(si);
-		__sa1100_irda_set_power(si, 0);
+	si->tx_buff.data = si->tx_buff.head;
+	si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data,
+					  si->tx_buff.truesize);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
 	}
 
-	return 0;
-}
-
-/*
- * Resume the IrDA interface.
- */
-static int sa1100_irda_resume(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct sa1100_irda *si;
-
-	if (!dev)
-		return 0;
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
 
-	si = netdev_priv(dev);
-	if (si->open) {
-		/*
-		 * If we missed a speed change, initialise at the new speed
-		 * directly.  It is debatable whether this is actually
-		 * required, but in the interests of continuing from where
-		 * we left off it is desirable.  The converse argument is
-		 * that we should re-negotiate at 9600 baud again.
-		 */
-		if (si->newspeed) {
-			si->speed = si->newspeed;
-			si->newspeed = 0;
-		}
-
-		sa1100_irda_startup(si);
-		__sa1100_irda_set_power(si, si->power);
-		enable_irq(dev->irq);
-
-		/*
-		 * This automatically wakes up the queue
-		 */
-		netif_device_attach(dev);
-	}
+	/*
+	 * The mean turn-around time is enforced by XBOF padding,
+	 * so we don't have to do anything special here.
+	 */
+	Ser2UTCR3 = UTCR3_TXE;
 
-	return 0;
+	return NETDEV_TX_OK;
 }
-#else
-#define sa1100_irda_suspend	NULL
-#define sa1100_irda_resume	NULL
-#endif
 
-/*
- * HP-SIR format interrupt service routines.
- */
-static void sa1100_irda_hpsir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
 {
-	struct sa1100_irda *si = netdev_priv(dev);
 	int status;
 
 	status = Ser2UTSR0;
@@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev)
 
 	}
 
-	if (status & UTSR0_TFS && si->tx_buff.len) {
-		/*
-		 * Transmitter FIFO is not full
-		 */
-		do {
-			Ser2UTDR = *si->tx_buff.data++;
-			si->tx_buff.len -= 1;
-		} while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
+	return IRQ_HANDLED;
+}
 
-		if (si->tx_buff.len == 0) {
-			dev->stats.tx_packets++;
-			dev->stats.tx_bytes += si->tx_buff.data -
-					      si->tx_buff.head;
+/*
+ * FIR format support.
+ */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
 
-			/*
-			 * We need to ensure that the transmitter has
-			 * finished.
-			 */
-			do
-				rmb();
-			while (Ser2UTSR1 & UTSR1_TBY);
+	/*
+	 * Wait for the transmission to complete.  Unfortunately,
+	 * the hardware doesn't give us an interrupt to indicate
+	 * "end of frame".
+	 */
+	do
+		rmb();
+	while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
 
-			/*
-			 * Ok, we've finished transmitting.  Now enable
-			 * the receiver.  Sometimes we get a receive IRQ
-			 * immediately after a transmit...
-			 */
-			Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
-			Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+	/*
+	 * Clear the transmit underrun bit.
+	 */
+	Ser2HSSR0 = HSSR0_TUR;
 
-			if (si->newspeed) {
-				sa1100_irda_set_speed(si, si->newspeed);
-				si->newspeed = 0;
-			}
+	/*
+	 * Do we need to change speed?  Note that we're lazy
+	 * here - we don't free the old dma_rx.skb.  We don't need
+	 * to allocate a buffer either.
+	 */
+	sa1100_irda_check_speed(si);
 
-			/* I'm hungry! */
-			netif_wake_queue(dev);
-		}
+	/*
+	 * Start reception.  This disables the transmitter for
+	 * us.  This will be using the existing RX buffer.
+	 */
+	sa1100_irda_rx_dma_start(si);
+
+	/* Account and free the packet. */
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev->stats.tx_packets ++;
+		dev->stats.tx_bytes += skb->len;
+		dev_kfree_skb_irq(skb);
+		si->dma_tx.skb = NULL;
 	}
+
+	/*
+	 * Make sure that the TX queue is available for sending
+	 * (for retries).  TX has priority over RX at all times.
+	 */
+	netif_wake_queue(dev);
+}
+
+static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
+{
+	int mtt = irda_get_mtt(skb);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
+
+	/*
+	 * If we have a mean turn-around time, impose the specified
+	 * specified delay.  We could shorten this by timing from
+	 * the point we received the packet.
+	 */
+	if (mtt)
+		udelay(mtt);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
+
+	return NETDEV_TX_OK;
 }
 
 static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
 {
-	struct sk_buff *skb = si->rxskb;
-	dma_addr_t dma_addr;
+	struct sk_buff *skb = si->dma_rx.skb;
 	unsigned int len, stat, data;
 
 	if (!skb) {
@@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 	/*
 	 * Get the current data position.
 	 */
-	dma_addr = sa1100_get_dma_pos(si->rxdma);
-	len = dma_addr - si->rxbuf_dma;
+	len = sa1100_irda_dma_xferred(&si->dma_rx);
 	if (len > HPSIR_MAX_RXLEN)
 		len = HPSIR_MAX_RXLEN;
-	dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
+	dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
 
 	do {
 		/*
@@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 	} while (Ser2HSSR0 & HSSR0_EIF);
 
 	if (stat & HSSR1_EOF) {
-		si->rxskb = NULL;
+		si->dma_rx.skb = NULL;
 
 		skb_put(skb, len);
 		skb->dev = dev;
@@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 		netif_rx(skb);
 	} else {
 		/*
-		 * Remap the buffer.
+		 * Remap the buffer - it was previously mapped, and we
+		 * hope that this succeeds.
 		 */
-		si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
-						HPSIR_MAX_RXLEN,
-						DMA_FROM_DEVICE);
+		dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
 	}
 }
 
 /*
- * FIR format interrupt service routine.  We only have to
- * handle RX events; transmit events go via the TX DMA handler.
- *
- * No matter what, we disable RX, process, and the restart RX.
+ * We only have to handle RX events here; transmit events go via the TX
+ * DMA handler. We disable RX, process, and the restart RX.
  */
-static void sa1100_irda_fir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
 {
-	struct sa1100_irda *si = netdev_priv(dev);
-
 	/*
 	 * Stop RX DMA
 	 */
-	sa1100_stop_dma(si->rxdma);
+	dmaengine_pause(si->dma_rx.chan);
 
 	/*
 	 * Framing error - we throw away the packet completely.
@@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
 		/*
 		 * Clear out the DMA...
 		 */
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+		Ser2HSCR0 = HSCR0_HSSP;
 
 		/*
 		 * Clear selected status bits now, so we
@@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
 	 * No matter what happens, we must restart reception.
 	 */
 	sa1100_irda_rx_dma_start(si);
-}
 
-static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev))))
-		sa1100_irda_fir_irq(dev);
-	else
-		sa1100_irda_hpsir_irq(dev);
 	return IRQ_HANDLED;
 }
 
 /*
- * TX DMA completion handler.
+ * Set the IrDA communications speed.
  */
-static void sa1100_irda_txdma_irq(void *id)
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
 {
-	struct net_device *dev = id;
-	struct sa1100_irda *si = netdev_priv(dev);
-	struct sk_buff *skb = si->txskb;
+	unsigned long flags;
+	int brd, ret = -EINVAL;
 
-	si->txskb = NULL;
+	switch (speed) {
+	case 9600:	case 19200:	case 38400:
+	case 57600:	case 115200:
+		brd = 3686400 / (16 * speed) - 1;
 
-	/*
-	 * Wait for the transmission to complete.  Unfortunately,
-	 * the hardware doesn't give us an interrupt to indicate
-	 * "end of frame".
-	 */
-	do
-		rmb();
-	while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+		/* Stop the receive DMA, and configure transmit. */
+		if (IS_FIR(si)) {
+			dmaengine_terminate_all(si->dma_rx.chan);
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_sir_tx);
+		}
 
-	/*
-	 * Clear the transmit underrun bit.
-	 */
-	Ser2HSSR0 = HSSR0_TUR;
+		local_irq_save(flags);
 
-	/*
-	 * Do we need to change speed?  Note that we're lazy
-	 * here - we don't free the old rxskb.  We don't need
-	 * to allocate a buffer either.
-	 */
-	if (si->newspeed) {
-		sa1100_irda_set_speed(si, si->newspeed);
-		si->newspeed = 0;
-	}
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = HSCR0_UART;
 
-	/*
-	 * Start reception.  This disables the transmitter for
-	 * us.  This will be using the existing RX buffer.
-	 */
-	sa1100_irda_rx_dma_start(si);
+		Ser2UTCR1 = brd >> 8;
+		Ser2UTCR2 = brd;
 
-	/*
-	 * Account and free the packet.
-	 */
-	if (skb) {
-		dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
-		dev->stats.tx_packets ++;
-		dev->stats.tx_bytes += skb->len;
-		dev_kfree_skb_irq(skb);
+		/*
+		 * Clear status register
+		 */
+		Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+		Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_sir_tx_start;
+		si->irq = sa1100_irda_sir_irq;
+
+		local_irq_restore(flags);
+		ret = 0;
+		break;
+
+	case 4000000:
+		if (!IS_FIR(si))
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_fir_tx);
+
+		local_irq_save(flags);
+
+		Ser2HSSR0 = 0xff;
+		Ser2HSCR0 = HSCR0_HSSP;
+		Ser2UTCR3 = 0;
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_fir_tx_start;
+		si->irq = sa1100_irda_fir_irq;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		sa1100_irda_rx_alloc(si);
+		sa1100_irda_rx_dma_start(si);
+
+		local_irq_restore(flags);
+
+		break;
+
+	default:
+		break;
 	}
 
-	/*
-	 * Make sure that the TX queue is available for sending
-	 * (for retries).  TX has priority over RX at all times.
-	 */
-	netif_wake_queue(dev);
+	return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ *  0 - off
+ *  1 - short range, lowest power
+ *  2 - medium range, medium power
+ *  3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret = 0;
+	if (si->pdata->set_power)
+		ret = si->pdata->set_power(si->dev, state);
+	return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret;
+
+	ret = __sa1100_irda_set_power(si, state);
+	if (ret == 0)
+		si->power = state;
+
+	return ret;
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct sa1100_irda *si = netdev_priv(dev);
+
+	return si->irq(dev, si);
 }
 
 static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (speed != si->speed && speed != -1)
 		si->newspeed = speed;
 
-	/*
-	 * If this is an empty frame, we can bypass a lot.
-	 */
+	/* If this is an empty frame, we can bypass a lot. */
 	if (skb->len == 0) {
-		if (si->newspeed) {
-			si->newspeed = 0;
-			sa1100_irda_set_speed(si, speed);
-		}
+		sa1100_irda_check_speed(si);
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
-	if (!IS_FIR(si)) {
-		netif_stop_queue(dev);
-
-		si->tx_buff.data = si->tx_buff.head;
-		si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data,
-						  si->tx_buff.truesize);
-
-		/*
-		 * Set the transmit interrupt enable.  This will fire
-		 * off an interrupt immediately.  Note that we disable
-		 * the receiver so we won't get spurious characteres
-		 * received.
-		 */
-		Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
-
-		dev_kfree_skb(skb);
-	} else {
-		int mtt = irda_get_mtt(skb);
-
-		/*
-		 * We must not be transmitting...
-		 */
-		BUG_ON(si->txskb);
-
-		netif_stop_queue(dev);
-
-		si->txskb = skb;
-		si->txbuf_dma = dma_map_single(si->dev, skb->data,
-					 skb->len, DMA_TO_DEVICE);
-
-		sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
-
-		/*
-		 * If we have a mean turn-around time, impose the specified
-		 * specified delay.  We could shorten this by timing from
-		 * the point we received the packet.
-		 */
-		if (mtt)
-			udelay(mtt);
+	netif_stop_queue(dev);
 
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
-	}
+	/* We must not already have a skb to transmit... */
+	BUG_ON(si->dma_tx.skb);
 
-	return NETDEV_TX_OK;
+	return si->tx_start(skb, dev, si);
 }
 
 static int
@@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 	return ret;
 }
 
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+	int ret;
+
+	/*
+	 * Ensure that the ports for this device are setup correctly.
+	 */
+	if (si->pdata->startup)	{
+		ret = si->pdata->startup(si->dev);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Configure PPC for IRDA - we want to drive TXD2 low.
+	 * We also want to drive this pin low during sleep.
+	 */
+	PPSR &= ~PPC_TXD2;
+	PSDR &= ~PPC_TXD2;
+	PPDR |= PPC_TXD2;
+
+	/*
+	 * Enable HP-SIR modulation, and ensure that the port is disabled.
+	 */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = HSCR0_UART;
+	Ser2UTCR4 = si->utcr4;
+	Ser2UTCR0 = UTCR0_8BitData;
+	Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+	/*
+	 * Clear status register
+	 */
+	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+	ret = sa1100_irda_set_speed(si, si->speed = 9600);
+	if (ret) {
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = 0;
+
+		if (si->pdata->shutdown)
+			si->pdata->shutdown(si->dev);
+	}
+
+	return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+	/*
+	 * Stop all DMA activity.
+	 */
+	dmaengine_terminate_all(si->dma_rx.chan);
+	dmaengine_terminate_all(si->dma_tx.chan);
+
+	/* Disable the port. */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = 0;
+
+	if (si->pdata->shutdown)
+		si->pdata->shutdown(si->dev);
+}
+
 static int sa1100_irda_start(struct net_device *dev)
 {
 	struct sa1100_irda *si = netdev_priv(dev);
@@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev)
 
 	si->speed = 9600;
 
-	err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
-	if (err)
-		goto err_irq;
-
-	err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
-				 NULL, NULL, &si->rxdma);
+	err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
+				&sa1100_irda_fir_rx);
 	if (err)
 		goto err_rx_dma;
 
-	err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
-				 sa1100_irda_txdma_irq, dev, &si->txdma);
+	err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
+				&sa1100_irda_sir_tx);
 	if (err)
 		goto err_tx_dma;
 
 	/*
-	 * The interrupt must remain disabled for now.
-	 */
-	disable_irq(dev->irq);
-
-	/*
 	 * Setup the serial port for the specified speed.
 	 */
 	err = sa1100_irda_startup(si);
@@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev)
 	if (!si->irlap)
 		goto err_irlap;
 
+	err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+	if (err)
+		goto err_irq;
+
 	/*
 	 * Now enable the interrupt and start the queue
 	 */
 	si->open = 1;
 	sa1100_set_power(si, power_level); /* low power mode */
-	enable_irq(dev->irq);
+
 	netif_start_queue(dev);
 	return 0;
 
+err_irq:
+	irlap_close(si->irlap);
 err_irlap:
 	si->open = 0;
 	sa1100_irda_shutdown(si);
 err_startup:
-	sa1100_free_dma(si->txdma);
+	dma_release_channel(si->dma_tx.chan);
 err_tx_dma:
-	sa1100_free_dma(si->rxdma);
+	dma_release_channel(si->dma_rx.chan);
 err_rx_dma:
-	free_irq(dev->irq, dev);
-err_irq:
 	return err;
 }
 
 static int sa1100_irda_stop(struct net_device *dev)
 {
 	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	netif_stop_queue(dev);
 
-	disable_irq(dev->irq);
+	si->open = 0;
 	sa1100_irda_shutdown(si);
 
 	/*
-	 * If we have been doing DMA receive, make sure we
+	 * If we have been doing any DMA activity, make sure we
 	 * tidy that up cleanly.
 	 */
-	if (si->rxskb) {
-		dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
-				 DMA_FROM_DEVICE);
-		dev_kfree_skb(si->rxskb);
-		si->rxskb = NULL;
+	skb = si->dma_rx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
+			     DMA_FROM_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_rx.skb = NULL;
+	}
+
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_tx.skb = NULL;
 	}
 
 	/* Stop IrLAP */
@@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev)
 		si->irlap = NULL;
 	}
 
-	netif_stop_queue(dev);
-	si->open = 0;
-
 	/*
 	 * Free resources
 	 */
-	sa1100_free_dma(si->txdma);
-	sa1100_free_dma(si->rxdma);
+	dma_release_channel(si->dma_tx.chan);
+	dma_release_channel(si->dma_rx.chan);
 	free_irq(dev->irq, dev);
 
 	sa1100_set_power(si, 0);
@@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	struct net_device *dev;
 	struct sa1100_irda *si;
 	unsigned int baudrate_mask;
-	int err;
+	int err, irq;
 
 	if (!pdev->dev.platform_data)
 		return -EINVAL;
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq < 0 ? irq : -ENXIO;
+
 	err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
 	if (err)
 		goto err_mem_1;
@@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	if (!dev)
 		goto err_mem_4;
 
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
 	si = netdev_priv(dev);
 	si->dev = &pdev->dev;
 	si->pdata = pdev->dev.platform_data;
 
+	sg_init_table(&si->dma_rx.sg, 1);
+	sg_init_table(&si->dma_tx.sg, 1);
+
 	/*
 	 * Initialise the HP-SIR buffers
 	 */
 	err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
 	if (err)
 		goto err_mem_5;
-	err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
+	err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
 	if (err)
 		goto err_mem_5;
 
 	dev->netdev_ops	= &sa1100_irda_netdev_ops;
-	dev->irq	= IRQ_Ser2ICP;
+	dev->irq	= irq;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
@@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * Stop the transmit queue
+		 */
+		netif_device_detach(dev);
+		disable_irq(dev->irq);
+		sa1100_irda_shutdown(si);
+		__sa1100_irda_set_power(si, 0);
+	}
+
+	return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * If we missed a speed change, initialise at the new speed
+		 * directly.  It is debatable whether this is actually
+		 * required, but in the interests of continuing from where
+		 * we left off it is desirable.  The converse argument is
+		 * that we should re-negotiate at 9600 baud again.
+		 */
+		if (si->newspeed) {
+			si->speed = si->newspeed;
+			si->newspeed = 0;
+		}
+
+		sa1100_irda_startup(si);
+		__sa1100_irda_set_power(si, si->power);
+		enable_irq(dev->irq);
+
+		/*
+		 * This automatically wakes up the queue
+		 */
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+#else
+#define sa1100_irda_suspend	NULL
+#define sa1100_irda_resume	NULL
+#endif
+
 static struct platform_driver sa1100ir_driver = {
 	.probe		= sa1100_irda_probe,
 	.remove		= sa1100_irda_remove,
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index ef5848f..70f728c 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -22,6 +22,40 @@
 
 #include "sa1111_generic.h"
 
+/*
+ * These are offsets from the above base.
+ */
+#define PCCR	0x0000
+#define PCSSR	0x0004
+#define PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
 #define IDX_IRQ_S0_READY_NINT	(0)
 #define IDX_IRQ_S0_CD_VALID	(1)
 #define IDX_IRQ_S0_BVD1_STSCHG	(2)
@@ -32,7 +66,7 @@
 void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
 	struct sa1111_pcmcia_socket *s = to_skt(skt);
-	unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR);
+	unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
 
 	switch (skt->nr) {
 	case 0:
@@ -88,10 +122,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
 		pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
 
 	local_irq_save(flags);
-	val = sa1111_readl(s->dev->mapbase + SA1111_PCCR);
+	val = sa1111_readl(s->dev->mapbase + PCCR);
 	val &= ~pccr_skt_mask;
 	val |= pccr_set_mask & pccr_skt_mask;
-	sa1111_writel(val, s->dev->mapbase + SA1111_PCCR);
+	sa1111_writel(val, s->dev->mapbase + PCCR);
 	local_irq_restore(flags);
 
 	return 0;
@@ -141,20 +175,26 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
 static int pcmcia_probe(struct sa1111_dev *dev)
 {
 	void __iomem *base;
+	int ret;
+
+	ret = sa1111_enable_device(dev);
+	if (ret)
+		return ret;
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	if (!request_mem_region(dev->res.start, 512,
-				SA1111_DRIVER_NAME(dev)))
+	if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
+		sa1111_disable_device(dev);
 		return -EBUSY;
+	}
 
 	base = dev->mapbase;
 
 	/*
 	 * Initialise the suspend state.
 	 */
-	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR);
-	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR);
+	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
+	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
 
 #ifdef CONFIG_SA1100_BADGE4
 	pcmcia_badge4_init(&dev->dev);
@@ -184,6 +224,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 	}
 
 	release_mem_region(dev->res.start, 512);
+	sa1111_disable_device(dev);
 	return 0;
 }
 
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 50f297d..1d78739 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 
 	ret = sa1111_pcmcia_configure_socket(skt, state);
 	if (ret == 0) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
-		local_irq_restore(flags);
+		neponset_ncr_frob(ncr_mask, ncr_set);
 		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 	}
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index fa512ed..4940fa8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,7 @@
 #include <linux/bitops.h>
 
 #include <mach/hardware.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 #include <mach/regs-rtc.h>
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index a750aa7..2a28b4a 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -305,7 +305,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	info->base = base;
 
 	info->info.scsi.io_base		= base + 0x2000;
-	info->info.scsi.irq		= NO_IRQ;
+	info->info.scsi.irq		= 0;
 	info->info.scsi.dma		= NO_DMA;
 	info->info.scsi.io_shift	= 5;
 	info->info.ifcfg.clockrate	= 24; /* MHz */
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index e85c40b..6206a66 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
 	fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
 	fn(info, SCpnt, result);
 
-	if (info->scsi.irq != NO_IRQ) {
+	if (info->scsi.irq) {
 		spin_lock_irqsave(&info->host_lock, flags);
 		if (info->scsi.phase == PHASE_IDLE)
 			fas216_kick(info);
@@ -2276,7 +2276,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 	 * We should only be using this if we don't have an interrupt.
 	 * Provide some "incentive" to use the queueing code.
 	 */
-	BUG_ON(info->scsi.irq != NO_IRQ);
+	BUG_ON(info->scsi.irq);
 
 	info->internal_done = 0;
 	fas216_queue_command_lck(SCpnt, fas216_internal_done);
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 84b7127..df2e1b3 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -12,10 +12,6 @@
 #ifndef FAS216_H
 #define FAS216_H
 
-#ifndef NO_IRQ
-#define NO_IRQ 255
-#endif
-
 #include <scsi/scsi_eh.h>
 
 #include "queue.h"
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ef7a21a..2ca5959 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -38,6 +38,7 @@
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9..e1004fb 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
-#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 #endif
 
-extern int usb_disabled(void);
+#define USB_STATUS	0x0118
+#define USB_RESET	0x011c
+#define USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
 
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+	dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
 
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
 {
-	unsigned int usb_rst = 0;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
 
-	printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
 
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		badge4_set_5V(BADGE4_5V_USB, 1);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
 	}
+	return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SA-1111 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sa1111_reset,
+	.start =		ohci_sa1111_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst = 0;
+	int ret;
+
+	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 
 	if (machine_is_xp860() ||
 	    machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 	 * host controller in reset.
 	 */
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Now, carefully enable the USB clock, and take
 	 * the USB host controller out of reset.
 	 */
-	sa1111_enable_device(dev);
-	udelay(11);
-	sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+	ret = sa1111_enable_device(dev);
+	if (ret == 0) {
+		udelay(11);
+		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+	}
+
+	return ret;
 }
 
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+
+	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Stop the USB clock.
 	 */
 	sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		/* Disable power to the USB bus */
-		badge4_set_5V(BADGE4_5V_USB, 0);
-	}
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
-	unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
-	dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
-	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
-	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
-	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
-	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
-	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
 
 /**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
  *
  * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
  */
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
-			  struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd;
-	int retval;
+	int ret;
 
-	hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 	if (!hcd)
 		return -ENOMEM;
+
 	hcd->rsrc_start = dev->res.start;
 	hcd->rsrc_len = resource_size(&dev->res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dbg("request_mem_region failed");
-		retval = -EBUSY;
+		ret = -EBUSY;
 		goto err1;
 	}
+
 	hcd->regs = dev->mapbase;
 
-	sa1111_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	ret = sa1111_start_hc(dev);
+	if (ret)
+		goto err2;
 
-	retval = usb_add_hcd(hcd, dev->irq[1], 0);
-	if (retval == 0)
-		return retval;
+	ret = usb_add_hcd(hcd, dev->irq[1], 0);
+	if (ret == 0)
+		return ret;
 
 	sa1111_stop_hc(dev);
+ err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
-	return retval;
+	return ret;
 }
 
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
 /**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
  * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
  *
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
  */
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 {
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
 	usb_remove_hcd(hcd);
 	sa1111_stop_hc(dev);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
 
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
 	return 0;
 }
 
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"SA-1111 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_sa1111_start,
-	.stop =			ohci_stop,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
-	return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 
-	usb_hcd_sa1111_remove(hcd, dev);
-	return 0;
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		hcd->driver->shutdown(hcd);
+		sa1111_stop_hc(dev);
+	}
 }
 
 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 	.drv = {
 		.name	= "sa1111-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_USB,
-	.probe		= ohci_hcd_sa1111_drv_probe,
-	.remove		= ohci_hcd_sa1111_drv_remove,
+	.probe		= ohci_hcd_sa1111_probe,
+	.remove		= ohci_hcd_sa1111_remove,
+	.shutdown	= ohci_hcd_sa1111_shutdown,
 };
-
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 98d55d0..b632584 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -173,282 +173,48 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 #include <linux/io.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <mach/assabet.h>
 #include <mach/shannon.h>
 
 /*
- * debugging?
- */
-#define DEBUG 0
-/*
  * Complain if VAR is out of range.
  */
 #define DEBUG_VAR 1
 
-#undef ASSABET_PAL_VIDEO
-
 #include "sa1100fb.h"
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
-static struct sa1100fb_rgb rgb_4 = {
+static const struct sa1100fb_rgb rgb_4 = {
 	.red	= { .offset = 0,  .length = 4, },
 	.green	= { .offset = 0,  .length = 4, },
 	.blue	= { .offset = 0,  .length = 4, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb rgb_8 = {
+static const struct sa1100fb_rgb rgb_8 = {
 	.red	= { .offset = 0,  .length = 8, },
 	.green	= { .offset = 0,  .length = 8, },
 	.blue	= { .offset = 0,  .length = 8, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb def_rgb_16 = {
+static const struct sa1100fb_rgb def_rgb_16 = {
 	.red	= { .offset = 11, .length = 5, },
 	.green	= { .offset = 5,  .length = 6, },
 	.blue	= { .offset = 0,  .length = 5, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-#ifdef CONFIG_SA1100_ASSABET
-#ifndef ASSABET_PAL_VIDEO
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 61,		.upper_margin	= 3,
-	.right_margin	= 9,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#else
-static struct sa1100fb_mach_info pal_info __initdata = {
-	.pixclock	= 67797,	.bpp		= 16,
-	.xres		= 640,		.yres		= 512,
-
-	.hsync_len	= 64,		.vsync_len	= 6,
-	.left_margin	= 125,		.upper_margin	= 70,
-	.right_margin	= 115,		.lower_margin	= 36,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#endif
-
-#ifdef CONFIG_SA1100_H3600
-static struct sa1100fb_mach_info h3600_info __initdata = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-
-static struct sa1100fb_rgb h3600_rgb_16 = {
-	.red	= { .offset = 12, .length = 4, },
-	.green	= { .offset = 7,  .length = 4, },
-	.blue	= { .offset = 1,  .length = 4, },
-	.transp	= { .offset = 0,  .length = 0, },
-};
-#endif
-
-#ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __initdata = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __initdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 11,		.upper_margin	= 2,
-	.right_margin	= 30,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __initdata = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __initdata = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __initdata = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __initdata = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-#ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __initdata = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-#endif
-
 
 
-static struct sa1100fb_mach_info * __init
-sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-	/*
-	 *            R        G       B       T
-	 * default  {11,5}, { 5,6}, { 0,5}, { 0,0}
-	 * h3600    {12,4}, { 7,4}, { 1,4}, { 0,0}
-	 * freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
-	 */
-#ifdef CONFIG_SA1100_ASSABET
-	if (machine_is_assabet()) {
-#ifndef ASSABET_PAL_VIDEO
-		inf = &lq039q2ds54_info;
-#else
-		inf = &pal_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_H3100
-	if (machine_is_h3100()) {
-		inf = &h3100_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_H3600
-	if (machine_is_h3600()) {
-		inf = &h3600_info;
-		fbi->rgb[RGB_16] = &h3600_rgb_16;
-	}
-#endif
-#ifdef CONFIG_SA1100_COLLIE
-	if (machine_is_collie()) {
-		inf = &collie_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_LART
-	if (machine_is_lart()) {
-#ifdef LART_GREY_LCD
-		inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-		inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-		inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-		inf = &lart_kit01_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_SHANNON
-	if (machine_is_shannon()) {
-		inf = &shannon_info;
-	}
-#endif
-	return inf;
-}
-
 static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
 static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
 
@@ -533,7 +299,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * is what you poke into the framebuffer to produce the
 	 * colour you requested.
 	 */
-	if (fbi->cmap_inverse) {
+	if (fbi->inf->cmap_inverse) {
 		red   = 0xffff - red;
 		green = 0xffff - green;
 		blue  = 0xffff - blue;
@@ -607,14 +373,14 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		var->xres = MIN_XRES;
 	if (var->yres < MIN_YRES)
 		var->yres = MIN_YRES;
-	if (var->xres > fbi->max_xres)
-		var->xres = fbi->max_xres;
-	if (var->yres > fbi->max_yres)
-		var->yres = fbi->max_yres;
+	if (var->xres > fbi->inf->xres)
+		var->xres = fbi->inf->xres;
+	if (var->yres > fbi->inf->yres)
+		var->yres = fbi->inf->yres;
 	var->xres_virtual = max(var->xres_virtual, var->xres);
 	var->yres_virtual = max(var->yres_virtual, var->yres);
 
-	DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+	dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
 	case 4:
 		rgbidx = RGB_4;
@@ -638,16 +404,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	var->blue   = fbi->rgb[rgbidx]->blue;
 	var->transp = fbi->rgb[rgbidx]->transp;
 
-	DPRINTK("RGBT length = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
 		var->red.length, var->green.length, var->blue.length,
 		var->transp.length);
 
-	DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
 		var->red.offset, var->green.offset, var->blue.offset,
 		var->transp.offset);
 
 #ifdef CONFIG_CPU_FREQ
-	printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+	dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
 		sa1100fb_display_dma_period(var),
 		cpufreq_get(smp_processor_id()));
 #endif
@@ -655,22 +421,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-static inline void sa1100fb_set_truecolor(u_int is_true_color)
+static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual)
 {
-	if (machine_is_assabet()) {
-#if 1		// phase 4 or newer Assabet's
-		if (is_true_color)
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
-		// older Assabet's
-		if (is_true_color)
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
-	}
+	if (fbi->inf->set_visual)
+		fbi->inf->set_visual(visual);
 }
 
 /*
@@ -683,11 +437,11 @@ static int sa1100fb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 	unsigned long palette_mem_size;
 
-	DPRINTK("set_par\n");
+	dev_dbg(fbi->dev, "set_par\n");
 
 	if (var->bits_per_pixel == 16)
 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
-	else if (!fbi->cmap_static)
+	else if (!fbi->inf->cmap_static)
 		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 	else {
 		/*
@@ -704,7 +458,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 
 	palette_mem_size = fbi->palette_size * sizeof(u16);
 
-	DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+	dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
 
 	fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
 	fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
@@ -712,7 +466,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 	/*
 	 * Set (any) board control register to handle new color depth
 	 */
-	sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+	sa1100fb_set_visual(fbi, fbi->fb.fix.visual);
 	sa1100fb_activate_var(var, fbi);
 
 	return 0;
@@ -728,7 +482,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
 	/*
 	 * Make sure the user isn't doing something stupid.
 	 */
-	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
+	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static))
 		return -EINVAL;
 
 	return gen_set_cmap(cmap, kspc, con, info);
@@ -775,7 +529,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
 	struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
 	int i;
 
-	DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+	dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
 
 	switch (blank) {
 	case FB_BLANK_POWERDOWN:
@@ -863,43 +617,43 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	u_int half_screen_size, yres, pcd;
 	u_long flags;
 
-	DPRINTK("Configuring SA1100 LCD\n");
+	dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
 
-	DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+	dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,
 		var->left_margin, var->right_margin);
-	DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+	dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
 		var->yres, var->vsync_len,
 		var->upper_margin, var->lower_margin);
 
 #if DEBUG_VAR
 	if (var->xres < 16        || var->xres > 1024)
-		printk(KERN_ERR "%s: invalid xres %d\n",
+		dev_err(fbi->dev, "%s: invalid xres %d\n",
 			fbi->fb.fix.id, var->xres);
 	if (var->hsync_len < 1    || var->hsync_len > 64)
-		printk(KERN_ERR "%s: invalid hsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
 			fbi->fb.fix.id, var->hsync_len);
 	if (var->left_margin < 1  || var->left_margin > 255)
-		printk(KERN_ERR "%s: invalid left_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid left_margin %d\n",
 			fbi->fb.fix.id, var->left_margin);
 	if (var->right_margin < 1 || var->right_margin > 255)
-		printk(KERN_ERR "%s: invalid right_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid right_margin %d\n",
 			fbi->fb.fix.id, var->right_margin);
 	if (var->yres < 1         || var->yres > 1024)
-		printk(KERN_ERR "%s: invalid yres %d\n",
+		dev_err(fbi->dev, "%s: invalid yres %d\n",
 			fbi->fb.fix.id, var->yres);
 	if (var->vsync_len < 1    || var->vsync_len > 64)
-		printk(KERN_ERR "%s: invalid vsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
 			fbi->fb.fix.id, var->vsync_len);
 	if (var->upper_margin < 0 || var->upper_margin > 255)
-		printk(KERN_ERR "%s: invalid upper_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
 			fbi->fb.fix.id, var->upper_margin);
 	if (var->lower_margin < 0 || var->lower_margin > 255)
-		printk(KERN_ERR "%s: invalid lower_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
 			fbi->fb.fix.id, var->lower_margin);
 #endif
 
-	new_regs.lccr0 = fbi->lccr0 |
+	new_regs.lccr0 = fbi->inf->lccr0 |
 		LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
 		LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
 
@@ -914,7 +668,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * the YRES parameter.
 	 */
 	yres = var->yres;
-	if (fbi->lccr0 & LCCR0_Dual)
+	if (fbi->inf->lccr0 & LCCR0_Dual)
 		yres /= 2;
 
 	new_regs.lccr2 =
@@ -924,14 +678,14 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 		LCCR2_EndFrmDel(var->lower_margin);
 
 	pcd = get_pcd(var->pixclock, cpufreq_get(0));
-	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
+	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
 		(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 		(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 
-	DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
-	DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
-	DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
-	DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+	dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+	dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+	dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+	dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
 
 	half_screen_size = var->bits_per_pixel;
 	half_screen_size = half_screen_size * var->xres * var->yres / 16;
@@ -951,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * Only update the registers if the controller is enabled
 	 * and something has changed.
 	 */
-	if ((LCCR0 != fbi->reg_lccr0)       || (LCCR1 != fbi->reg_lccr1) ||
-	    (LCCR2 != fbi->reg_lccr2)       || (LCCR3 != fbi->reg_lccr3) ||
-	    (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+	if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+	    readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+	    readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+	    readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+	    readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+	    readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
 		sa1100fb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -967,18 +724,18 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
  */
 static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("backlight o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_backlight_power)
-		sa1100fb_backlight_power(on);
+	if (fbi->inf->backlight_power)
+		fbi->inf->backlight_power(on);
 }
 
 static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_lcd_power)
-		sa1100fb_lcd_power(on);
+	if (fbi->inf->lcd_power)
+		fbi->inf->lcd_power(on);
 }
 
 static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
@@ -1008,14 +765,25 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
 	}
 
 	if (mask) {
+		unsigned long flags;
+
+		/*
+		 * SA-1100 requires the GPIO direction register set
+		 * appropriately for the alternate function.  Hence
+		 * we set it here via bitmask rather than excessive
+		 * fiddling via the GPIO subsystem - and even then
+		 * we'll still have to deal with GAFR.
+		 */
+		local_irq_save(flags);
 		GPDR |= mask;
 		GAFR |= mask;
+		local_irq_restore(flags);
 	}
 }
 
 static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 {
-	DPRINTK("Enabling LCD controller\n");
+	dev_dbg(fbi->dev, "Enabling LCD controller\n");
 
 	/*
 	 * Make sure the mode bits are present in the first palette entry
@@ -1024,43 +792,46 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
 
 	/* Sequence from 11.7.10 */
-	LCCR3 = fbi->reg_lccr3;
-	LCCR2 = fbi->reg_lccr2;
-	LCCR1 = fbi->reg_lccr1;
-	LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
-	DBAR1 = fbi->dbar1;
-	DBAR2 = fbi->dbar2;
-	LCCR0 |= LCCR0_LEN;
-
-	if (machine_is_shannon()) {
-		GPDR |= SHANNON_GPIO_DISP_EN;
-		GPSR |= SHANNON_GPIO_DISP_EN;
-	}
-
-	DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
-	DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
-	DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
-	DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
-	DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
-	DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+	writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+	writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+	writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+	writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+	writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
+
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+
+	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+	dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+	dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+	dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+	dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
 	DECLARE_WAITQUEUE(wait, current);
+	u32 lccr0;
 
-	DPRINTK("Disabling LCD controller\n");
+	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-	if (machine_is_shannon()) {
-		GPCR |= SHANNON_GPIO_DISP_EN;
-	}	
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
 
-	LCSR = 0xffffffff;	/* Clear LCD Status Register */
-	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
-	LCCR0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	/* Clear LCD Status Register */
+	writel_relaxed(~0, fbi->base + LCSR);
+
+	lccr0 = readl_relaxed(fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1072,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
 {
 	struct sa1100fb_info *fbi = dev_id;
-	unsigned int lcsr = LCSR;
+	unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
 
 	if (lcsr & LCSR_LDD) {
-		LCCR0 |= LCCR0_LDM;
+		u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+		writel_relaxed(lccr0, fbi->base + LCCR0);
 		wake_up(&fbi->ctrlr_wait);
 	}
 
-	LCSR = lcsr;
+	writel_relaxed(lcsr, fbi->base + LCSR);
 	return IRQ_HANDLED;
 }
 
@@ -1268,7 +1040,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
 	switch (val) {
 	case CPUFREQ_ADJUST:
 	case CPUFREQ_INCOMPATIBLE:
-		printk(KERN_DEBUG "min dma period: %d ps, "
+		dev_dbg(fbi->dev, "min dma period: %d ps, "
 			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
 			policy->max);
 		/* todo: fill in min/max values */
@@ -1318,7 +1090,7 @@ static int sa1100fb_resume(struct platform_device *dev)
  *      cache.  Once this area is remapped, all virtual memory
  *      access to the video memory should occur at the new region.
  */
-static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
+static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 {
 	/*
 	 * We reserve one page for the palette, plus the size
@@ -1344,7 +1116,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 }
 
 /* Fake monspecs to fill in fbinfo structure */
-static struct fb_monspecs monspecs __initdata = {
+static struct fb_monspecs monspecs __devinitdata = {
 	.hfmin	= 30000,
 	.hfmax	= 70000,
 	.vfmin	= 50,
@@ -1352,10 +1124,11 @@ static struct fb_monspecs monspecs __initdata = {
 };
 
 
-static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
+static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 {
-	struct sa1100fb_mach_info *inf;
+	struct sa1100fb_mach_info *inf = dev->platform_data;
 	struct sa1100fb_info *fbi;
+	unsigned i;
 
 	fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
 		      GFP_KERNEL);
@@ -1390,8 +1163,6 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	fbi->rgb[RGB_8]		= &rgb_8;
 	fbi->rgb[RGB_16]	= &def_rgb_16;
 
-	inf = sa1100fb_get_machine_info(fbi);
-
 	/*
 	 * People just don't seem to get this.  We don't support
 	 * anything but correct entries now, so panic if someone
@@ -1402,13 +1173,10 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 		panic("sa1100fb error: invalid LCCR3 fields set or zero "
 			"pixclock.");
 
-	fbi->max_xres			= inf->xres;
 	fbi->fb.var.xres		= inf->xres;
 	fbi->fb.var.xres_virtual	= inf->xres;
-	fbi->max_yres			= inf->yres;
 	fbi->fb.var.yres		= inf->yres;
 	fbi->fb.var.yres_virtual	= inf->yres;
-	fbi->max_bpp			= inf->bpp;
 	fbi->fb.var.bits_per_pixel	= inf->bpp;
 	fbi->fb.var.pixclock		= inf->pixclock;
 	fbi->fb.var.hsync_len		= inf->hsync_len;
@@ -1419,14 +1187,16 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	fbi->fb.var.lower_margin	= inf->lower_margin;
 	fbi->fb.var.sync		= inf->sync;
 	fbi->fb.var.grayscale		= inf->cmap_greyscale;
-	fbi->cmap_inverse		= inf->cmap_inverse;
-	fbi->cmap_static		= inf->cmap_static;
-	fbi->lccr0			= inf->lccr0;
-	fbi->lccr3			= inf->lccr3;
 	fbi->state			= C_STARTUP;
 	fbi->task_state			= (u_char)-1;
-	fbi->fb.fix.smem_len		= fbi->max_xres * fbi->max_yres *
-					  fbi->max_bpp / 8;
+	fbi->fb.fix.smem_len		= inf->xres * inf->yres *
+					  inf->bpp / 8;
+	fbi->inf			= inf;
+
+	/* Copy the RGB bitfield overrides */
+	for (i = 0; i < NR_RGB; i++)
+		if (inf->rgb[i])
+			fbi->rgb[i] = inf->rgb[i];
 
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, sa1100fb_task);
@@ -1438,13 +1208,20 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
+	struct resource *res;
 	int ret, irq;
 
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform LCD data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0 || !res)
 		return -EINVAL;
 
-	if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+	if (!request_mem_region(res->start, resource_size(res), "LCD"))
 		return -EBUSY;
 
 	fbi = sa1100fb_init_fbinfo(&pdev->dev);
@@ -1452,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	if (!fbi)
 		goto failed;
 
+	fbi->base = ioremap(res->start, resource_size(res));
+	if (!fbi->base)
+		goto failed;
+
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
 	if (ret)
@@ -1459,14 +1240,16 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
 	if (ret) {
-		printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+		dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
 		goto failed;
 	}
 
-#ifdef ASSABET_PAL_VIDEO
-	if (machine_is_assabet())
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-#endif
+	if (machine_is_shannon()) {
+		ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+			GPIOF_OUT_INIT_LOW, "display enable");
+		if (ret)
+			goto err_free_irq;
+	}
 
 	/*
 	 * This makes sure that our colour bitfield
@@ -1478,7 +1261,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0)
-		goto err_free_irq;
+		goto err_reg_fb;
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
@@ -1490,12 +1273,17 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	/* This driver cannot be unloaded at the moment */
 	return 0;
 
+ err_reg_fb:
+	if (machine_is_shannon())
+		gpio_free(SHANNON_GPIO_DISP_EN);
  err_free_irq:
 	free_irq(irq, fbi);
  failed:
+	if (fbi)
+		iounmap(fbi->base);
 	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
-	release_mem_region(0xb0100000, 0x10000);
+	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
@@ -1505,6 +1293,7 @@ static struct platform_driver sa1100fb_driver = {
 	.resume		= sa1100fb_resume,
 	.driver		= {
 		.name	= "sa11x0-fb",
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 1c3b459..fc5d429 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,44 +10,15 @@
  * for more details.
  */
 
-/*
- * These are the bitfields for each
- * display depth that we support.
- */
-struct sa1100fb_rgb {
-	struct fb_bitfield	red;
-	struct fb_bitfield	green;
-	struct fb_bitfield	blue;
-	struct fb_bitfield	transp;
-};
-
-/*
- * This structure describes the machine which we are running on.
- */
-struct sa1100fb_mach_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		lccr0;
-	u_int		lccr3;
-};
+#define LCCR0           0x0000          /* LCD Control Reg. 0 */
+#define LCSR            0x0004          /* LCD Status Reg. */
+#define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1           0x0014          /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2           0x0018          /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2           0x001C          /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1           0x0020          /* LCD Control Reg. 1 */
+#define LCCR2           0x0024          /* LCD Control Reg. 2 */
+#define LCCR3           0x0028          /* LCD Control Reg. 3 */
 
 /* Shadows for LCD controller registers */
 struct sa1100fb_lcd_reg {
@@ -57,19 +28,11 @@ struct sa1100fb_lcd_reg {
 	unsigned long lccr3;
 };
 
-#define RGB_4	(0)
-#define RGB_8	(1)
-#define RGB_16	(2)
-#define NR_RGB	3
-
 struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
-	struct sa1100fb_rgb	*rgb[NR_RGB];
-
-	u_int			max_bpp;
-	u_int			max_xres;
-	u_int			max_yres;
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+	void __iomem		*base;
 
 	/*
 	 * These are the addresses we mapped
@@ -88,12 +51,6 @@ struct sa1100fb_info {
 	dma_addr_t		dbar1;
 	dma_addr_t		dbar2;
 
-	u_int			lccr0;
-	u_int			lccr3;
-	u_int			cmap_inverse:1,
-				cmap_static:1,
-				unused:30;
-
 	u_int			reg_lccr0;
 	u_int			reg_lccr1;
 	u_int			reg_lccr2;
@@ -109,6 +66,8 @@ struct sa1100fb_info {
 	struct notifier_block	freq_transition;
 	struct notifier_block	freq_policy;
 #endif
+
+	const struct sa1100fb_mach_info *inf;
 };
 
 #define TO_INF(ptr,member)	container_of(ptr,struct sa1100fb_info,member)
@@ -130,15 +89,6 @@ struct sa1100fb_info {
 #define SA1100_NAME	"SA1100"
 
 /*
- *  Debug macros 
- */
-#if DEBUG
-#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
-/*
  * Minimum X and Y resolutions
  */
 #define MIN_XRES	64
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
index f88c1cc..a9e8bd1 100644
--- a/include/linux/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -10,8 +10,6 @@
 #ifndef MCP_H
 #define MCP_H
 
-#include <mach/dma.h>
-
 struct mcp_ops;
 
 struct mcp {
@@ -21,12 +19,7 @@ struct mcp {
 	int		use_count;
 	unsigned int	sclk_rate;
 	unsigned int	rw_timeout;
-	dma_device_t	dma_audio_rd;
-	dma_device_t	dma_audio_wr;
-	dma_device_t	dma_telco_rd;
-	dma_device_t	dma_telco_wr;
 	struct device	attached_device;
-	int		gpio_base;
 };
 
 struct mcp_ops {
@@ -47,15 +40,14 @@ void mcp_disable(struct mcp *);
 #define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
 
 struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
+int mcp_host_add(struct mcp *, void *);
+void mcp_host_del(struct mcp *);
+void mcp_host_free(struct mcp *);
 
 struct mcp_driver {
 	struct device_driver drv;
 	int (*probe)(struct mcp *);
 	void (*remove)(struct mcp *);
-	int (*suspend)(struct mcp *, pm_message_t);
-	int (*resume)(struct mcp *);
 };
 
 int mcp_driver_register(struct mcp_driver *);
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index 4321f04..28af417 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -12,7 +12,7 @@
 
 #include <linux/mfd/mcp.h>
 #include <linux/gpio.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 
 #define UCB_IO_DATA	0x00
 #define UCB_IO_DIR	0x01
@@ -104,17 +104,27 @@
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
 #define UCB_MODE_AUD_OFF_CAN	(1 << 13)
 
+enum ucb1x00_reset {
+	UCB_RST_PROBE,
+	UCB_RST_RESUME,
+	UCB_RST_SUSPEND,
+	UCB_RST_REMOVE,
+	UCB_RST_PROBE_FAIL,
+};
 
-struct ucb1x00_irq {
-	void *devid;
-	void (*fn)(int, void *);
+struct ucb1x00_plat_data {
+	void			(*reset)(enum ucb1x00_reset);
+	unsigned		irq_base;
+	int			gpio_base;
+	unsigned		can_wakeup;
 };
 
 struct ucb1x00 {
-	spinlock_t		lock;
+	raw_spinlock_t		irq_lock;
 	struct mcp		*mcp;
 	unsigned int		irq;
-	struct semaphore	adc_sem;
+	int			irq_base;
+	struct mutex		adc_mutex;
 	spinlock_t		io_lock;
 	u16			id;
 	u16			io_dir;
@@ -122,7 +132,8 @@ struct ucb1x00 {
 	u16			adc_cr;
 	u16			irq_fal_enbl;
 	u16			irq_ris_enbl;
-	struct ucb1x00_irq	irq_handler[16];
+	u16			irq_mask;
+	u16			irq_wake;
 	struct device		dev;
 	struct list_head	node;
 	struct list_head	devs;
@@ -144,7 +155,7 @@ struct ucb1x00_driver {
 	struct list_head	devs;
 	int	(*add)(struct ucb1x00_dev *dev);
 	void	(*remove)(struct ucb1x00_dev *dev);
-	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
+	int	(*suspend)(struct ucb1x00_dev *dev);
 	int	(*resume)(struct ucb1x00_dev *dev);
 };
 
@@ -245,15 +256,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
 void ucb1x00_adc_enable(struct ucb1x00 *ucb);
 void ucb1x00_adc_disable(struct ucb1x00 *ucb);
 
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING	(1 << 0)
-#define UCB_FALLING	(1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
 #endif
diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h
new file mode 100644
index 0000000..65839a5
--- /dev/null
+++ b/include/linux/sa11x0-dma.h
@@ -0,0 +1,24 @@
+/*
+ * SA11x0 DMA Engine support
+ *
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_SA11X0_DMA_H
+#define __LINUX_SA11X0_DMA_H
+
+struct dma_chan;
+
+#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
+bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
+#else
+static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
+{
+	return false;
+}
+#endif
+
+#endif
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
new file mode 100644
index 0000000..4ab4096
--- /dev/null
+++ b/include/video/sa1100fb.h
@@ -0,0 +1,63 @@
+/*
+ * StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ * Copyright (C) 1999 Eric A. Thomas
+ *  Based on acornfb.c Copyright (C) Russell King.
+ *  
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _VIDEO_SA1100FB_H
+#define _VIDEO_SA1100FB_H
+
+#include <linux/fb.h>
+#include <linux/types.h>
+
+#define RGB_4	0
+#define RGB_8	1
+#define RGB_16	2
+#define NR_RGB	3
+
+/* These are the bitfields for each display depth that we support. */
+struct sa1100fb_rgb {
+	struct fb_bitfield	red;
+	struct fb_bitfield	green;
+	struct fb_bitfield	blue;
+	struct fb_bitfield	transp;
+};
+
+/* This structure describes the machine which we are running on. */
+struct sa1100fb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		lccr0;
+	u_int		lccr3;
+
+	/* Overrides for the default RGB maps */
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+
+	void (*backlight_power)(int);
+	void (*lcd_power)(int);
+	void (*set_visual)(u32);
+};
+
+#endif