summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGlauber de Oliveira Costa <gcosta@redhat.com>2008-03-19 14:26:11 -0300
committerIngo Molnar <mingo@elte.hu>2008-04-17 17:41:04 +0200
commit8aef135c73436fa46fdb4dc8aba49d5539dee72d (patch)
treed733efeff177fc41ccf110dfb1d805b81518f8ef
parent9f3734f631267d2f36008833b62670ca342ac000 (diff)
downloadop-kernel-dev-8aef135c73436fa46fdb4dc8aba49d5539dee72d.zip
op-kernel-dev-8aef135c73436fa46fdb4dc8aba49d5539dee72d.tar.gz
x86: merge native_smp_prepare_cpus
With the previous changes, code for native_smp_prepare_cpus() in i386 and x86_64 now look very similar. merge them into smpboot.c. Minor differences are inside ifdef Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-rw-r--r--arch/x86/kernel/smpboot.c170
-rw-r--r--arch/x86/kernel/smpboot_32.c137
-rw-r--r--arch/x86/kernel/smpboot_64.c141
3 files changed, 170 insertions, 278 deletions
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 26118b4..45119d3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -7,6 +7,7 @@
#include <linux/err.h>
#include <linux/nmi.h>
+#include <asm/acpi.h>
#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
@@ -75,6 +76,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
static atomic_t init_deasserted;
+static int boot_cpu_logical_apicid;
+
/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
unsigned char *trampoline_base = __va(SMP_TRAMPOLINE_BASE);
@@ -1002,6 +1005,173 @@ int __cpuinit native_cpu_up(unsigned int cpu)
}
/*
+ * Fall back to non SMP mode after errors.
+ *
+ * RED-PEN audit/test this more. I bet there is more state messed up here.
+ */
+static __init void disable_smp(void)
+{
+ cpu_present_map = cpumask_of_cpu(0);
+ cpu_possible_map = cpumask_of_cpu(0);
+#ifdef CONFIG_X86_32
+ smpboot_clear_io_apic_irqs();
+#endif
+ if (smp_found_config)
+ phys_cpu_present_map =
+ physid_mask_of_physid(boot_cpu_physical_apicid);
+ else
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ map_cpu_to_logical_apicid();
+ cpu_set(0, per_cpu(cpu_sibling_map, 0));
+ cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+
+/*
+ * Various sanity checks.
+ */
+static int __init smp_sanity_check(unsigned max_cpus)
+{
+ if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
+ printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
+ "by the BIOS.\n", hard_smp_processor_id());
+ physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+ }
+
+ /*
+ * If we couldn't find an SMP configuration at boot time,
+ * get out of here now!
+ */
+ if (!smp_found_config && !acpi_lapic) {
+ printk(KERN_NOTICE "SMP motherboard not detected.\n");
+ disable_smp();
+ if (APIC_init_uniprocessor())
+ printk(KERN_NOTICE "Local APIC not detected."
+ " Using dummy APIC emulation.\n");
+ return -1;
+ }
+
+ /*
+ * Should not be necessary because the MP table should list the boot
+ * CPU too, but we do it for the sake of robustness anyway.
+ */
+ if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+ printk(KERN_NOTICE
+ "weird, boot CPU (#%d) not listed by the BIOS.\n",
+ boot_cpu_physical_apicid);
+ physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+ }
+
+ /*
+ * If we couldn't find a local APIC, then get out of here now!
+ */
+ if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+ !cpu_has_apic) {
+ printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ printk(KERN_ERR "... forcing use of dummy APIC emulation."
+ "(tell your hw vendor)\n");
+ smpboot_clear_io_apic();
+ return -1;
+ }
+
+ verify_local_APIC();
+
+ /*
+ * If SMP should be disabled, then really disable it!
+ */
+ if (!max_cpus) {
+ printk(KERN_INFO "SMP mode deactivated,"
+ "forcing use of dummy APIC emulation.\n");
+ smpboot_clear_io_apic();
+#ifdef CONFIG_X86_32
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ printk(KERN_INFO "activating minimal APIC for"
+ "NMI watchdog use.\n");
+ connect_bsp_APIC();
+ setup_local_APIC();
+ end_local_APIC_setup();
+ }
+#endif
+ return -1;
+ }
+
+ return 0;
+}
+
+static void __init smp_cpu_index_default(void)
+{
+ int i;
+ struct cpuinfo_x86 *c;
+
+ for_each_cpu_mask(i, cpu_possible_map) {
+ c = &cpu_data(i);
+ /* mark all to hotplug */
+ c->cpu_index = NR_CPUS;
+ }
+}
+
+/*
+ * Prepare for SMP bootup. The MP table or ACPI has been read
+ * earlier. Just do some sanity checking here and enable APIC mode.
+ */
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
+{
+ nmi_watchdog_default();
+ smp_cpu_index_default();
+ current_cpu_data = boot_cpu_data;
+ cpu_callin_map = cpumask_of_cpu(0);
+ mb();
+ /*
+ * Setup boot CPU information
+ */
+ smp_store_cpu_info(0); /* Final full version of the data */
+ boot_cpu_logical_apicid = logical_smp_processor_id();
+ current_thread_info()->cpu = 0; /* needed? */
+ set_cpu_sibling_map(0);
+
+ if (smp_sanity_check(max_cpus) < 0) {
+ printk(KERN_INFO "SMP disabled\n");
+ disable_smp();
+ return;
+ }
+
+ if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
+ panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+ GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
+ /* Or can we switch back to PIC here? */
+ }
+
+#ifdef CONFIG_X86_32
+ connect_bsp_APIC();
+#endif
+ /*
+ * Switch from PIC to APIC mode.
+ */
+ setup_local_APIC();
+
+#ifdef CONFIG_X86_64
+ /*
+ * Enable IO APIC before setting up error vector
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ enable_IO_APIC();
+#endif
+ end_local_APIC_setup();
+
+ map_cpu_to_logical_apicid();
+
+ setup_portio_remap();
+
+ smpboot_setup_io_apic();
+ /*
+ * Set up local APIC timer on boot CPU.
+ */
+
+ printk(KERN_INFO "CPU%d: ", 0);
+ print_cpu_info(&cpu_data(0));
+ setup_boot_clock();
+}
+/*
* Early setup to make printk work.
*/
void __init native_smp_prepare_boot_cpu(void)
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c
index 5a0f57f..3a1b9e4 100644
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot_32.c
@@ -74,7 +74,6 @@ EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
u8 apicid_2_node[MAX_APICID];
-extern void map_cpu_to_logical_apicid(void);
extern void unmap_cpu_to_logical_apicid(int cpu);
#ifdef CONFIG_HOTPLUG_CPU
@@ -94,144 +93,8 @@ void cpu_exit_clear(void)
}
#endif
-static int boot_cpu_logical_apicid;
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
#ifdef CONFIG_X86_NUMAQ
EXPORT_SYMBOL(xquad_portio);
#endif
-
-static void __init disable_smp(void)
-{
- cpu_possible_map = cpumask_of_cpu(0);
- cpu_present_map = cpumask_of_cpu(0);
- smpboot_clear_io_apic_irqs();
- if (smp_found_config)
- phys_cpu_present_map =
- physid_mask_of_physid(boot_cpu_physical_apicid);
- else
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-static int __init smp_sanity_check(unsigned max_cpus)
-{
- if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
- printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
- "by the BIOS.\n", hard_smp_processor_id());
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find an SMP configuration at boot time,
- * get out of here now!
- */
- if (!smp_found_config && !acpi_lapic) {
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
- disable_smp();
- if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
- return -1;
- }
-
- /*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- * Makes no sense to do this check in clustered apic mode, so skip it
- */
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find a local APIC, then get out of here now!
- */
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic();
- return -1;
- }
-
- verify_local_APIC();
-
- /*
- * If SMP should be disabled, then really disable it!
- */
- if (!max_cpus) {
- smp_found_config = 0;
- printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
- connect_bsp_APIC();
- setup_local_APIC();
- end_local_APIC_setup();
- }
- smpboot_clear_io_apic();
- return -1;
- }
- return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
- int i;
- struct cpuinfo_x86 *c;
-
- for_each_cpu_mask(i, cpu_possible_map) {
- c = &cpu_data(i);
- /* mark all to hotplug */
- c->cpu_index = NR_CPUS;
- }
-}
-
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
-{
- nmi_watchdog_default();
- smp_cpu_index_default();
- current_cpu_data = boot_cpu_data;
- cpu_callin_map = cpumask_of_cpu(0);
- mb();
-
- /*
- * Setup boot CPU information
- */
- smp_store_cpu_info(0); /* Final full version of the data */
- boot_cpu_logical_apicid = logical_smp_processor_id();
- current_thread_info()->cpu = 0;
-
- set_cpu_sibling_map(0);
-
- if (smp_sanity_check(max_cpus) < 0) {
- printk(KERN_INFO "SMP disabled\n");
- disable_smp();
- return;
- }
-
- if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
- panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
- GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
- /* Or can we switch back to PIC here? */
- }
-
- connect_bsp_APIC();
- setup_local_APIC();
- end_local_APIC_setup();
- map_cpu_to_logical_apicid();
-
- setup_portio_remap();
-
- smpboot_setup_io_apic();
-
- printk(KERN_INFO "CPU%d: ", 0);
- print_cpu_info(&cpu_data(0));
- setup_boot_clock();
-}
-
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
index 7752445..66b5562 100644
--- a/arch/x86/kernel/smpboot_64.c
+++ b/arch/x86/kernel/smpboot_64.c
@@ -71,144 +71,3 @@ int smp_threads_ready;
cycles_t cacheflush_time;
unsigned long cache_decay_ticks;
-
-static int boot_cpu_logical_apicid;
-/*
- * Fall back to non SMP mode after errors.
- *
- * RED-PEN audit/test this more. I bet there is more state messed up here.
- */
-static __init void disable_smp(void)
-{
- cpu_present_map = cpumask_of_cpu(0);
- cpu_possible_map = cpumask_of_cpu(0);
- if (smp_found_config)
- phys_cpu_present_map =
- physid_mask_of_physid(boot_cpu_physical_apicid);
- else
- phys_cpu_present_map = physid_mask_of_physid(0);
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-/*
- * Various sanity checks.
- */
-static int __init smp_sanity_check(unsigned max_cpus)
-{
- if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- hard_smp_processor_id());
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find an SMP configuration at boot time,
- * get out of here now!
- */
- if (!smp_found_config && !acpi_lapic) {
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
- disable_smp();
- if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
- return -1;
- }
-
- /*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- */
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk(KERN_NOTICE
- "weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find a local APIC, then get out of here now!
- */
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
- !cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic();
- return -1;
- }
-
- verify_local_APIC();
-
- /*
- * If SMP should be disabled, then really disable it!
- */
- if (!max_cpus) {
- printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
- smpboot_clear_io_apic();
- return -1;
- }
-
- return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
- int i;
- struct cpuinfo_x86 *c;
-
- for_each_cpu_mask(i, cpu_possible_map) {
- c = &cpu_data(i);
- /* mark all to hotplug */
- c->cpu_index = NR_CPUS;
- }
-}
-
-/*
- * Prepare for SMP bootup. The MP table or ACPI has been read
- * earlier. Just do some sanity checking here and enable APIC mode.
- */
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
-{
- nmi_watchdog_default();
- smp_cpu_index_default();
- cpu_callin_map = cpumask_of_cpu(0);
- mb();
-
- current_cpu_data = boot_cpu_data;
- boot_cpu_logical_apicid = logical_smp_processor_id();
- current_thread_info()->cpu = 0; /* needed? */
- set_cpu_sibling_map(0);
-
- if (smp_sanity_check(max_cpus) < 0) {
- printk(KERN_INFO "SMP disabled\n");
- disable_smp();
- return;
- }
-
- if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
- panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
- GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
- /* Or can we switch back to PIC here? */
- }
-
- /*
- * Switch from PIC to APIC mode.
- */
- setup_local_APIC();
-
- /*
- * Enable IO APIC before setting up error vector
- */
- if (!skip_ioapic_setup && nr_ioapics)
- enable_IO_APIC();
- end_local_APIC_setup();
-
- /*
- * Set up local APIC timer on boot CPU.
- */
-
- setup_boot_clock();
- printk(KERN_INFO "CPU%d: ", 0);
- print_cpu_info(&cpu_data(0));
-}
OpenPOWER on IntegriCloud