drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver

This driver adds support for Xilinx 10/100/1000 AXI Ethernet.

It can be used, for instance, on Xilinx boards with a Microblaze
architecture like the ML605.

The patch is against the latest net-next tree and checkpatch clean.

Signed-off-by: Ariane Keller <ariane.keller@tik.ee.ethz.ch>
Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 2444 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 93c68d5..087b65d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7469,6 +7469,12 @@ S:	Supported
 F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
+XILINX AXI ETHERNET DRIVER
+M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
+M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+S:	Maintained
+F:	drivers/net/ethernet/xilinx/xilinx_axienet*
+
 XILINX SYSTEMACE DRIVER
 M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://www.secretlab.ca/
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index d5a8260..5778a4a 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -25,6 +25,14 @@ config XILINX_EMACLITE
 	---help---
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
 
+config XILINX_AXI_EMAC
+	tristate "Xilinx 10/100/1000 AXI Ethernet support"
+	depends on (PPC32 || MICROBLAZE)
+	select PHYLIB
+	---help---
+	  This driver supports the 10/100/1000 Ethernet from Xilinx for the
+	  AXI bus interface used in Xilinx Virtex FPGAs.
+
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
 	depends on (PPC || MICROBLAZE)
diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
index 5feac73..214205e 100644
--- a/drivers/net/ethernet/xilinx/Makefile
+++ b/drivers/net/ethernet/xilinx/Makefile
@@ -5,3 +5,5 @@
 ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
+xilinx_emac-objs := xilinx_axienet_main.o xilinx_axienet_mdio.o
+obj-$(CONFIG_XILINX_AXI_EMAC) += xilinx_emac.o
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
new file mode 100644
index 0000000..cc83af0
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -0,0 +1,508 @@
+/*
+ * Definitions for Xilinx Axi Ethernet device driver.
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ * Copyright (c) 2010 Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch>
+ * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch>
+ */
+
+#ifndef XILINX_AXIENET_H
+#define XILINX_AXIENET_H
+
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+/* Packet size info */
+#define XAE_HDR_SIZE			14 /* Size of Ethernet header */
+#define XAE_HDR_VLAN_SIZE		18 /* Size of an Ethernet hdr + VLAN */
+#define XAE_TRL_SIZE			 4 /* Size of Ethernet trailer (FCS) */
+#define XAE_MTU			      1500 /* Max MTU of an Ethernet frame */
+#define XAE_JUMBO_MTU		      9000 /* Max MTU of a jumbo Eth. frame */
+
+#define XAE_MAX_FRAME_SIZE	 (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
+#define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE)
+#define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
+
+/* Configuration options */
+
+/* Accept all incoming packets. Default: disabled (cleared) */
+#define XAE_OPTION_PROMISC			(1 << 0)
+
+/* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
+#define XAE_OPTION_JUMBO			(1 << 1)
+
+/* VLAN Rx & Tx frame support. Default: disabled (cleared) */
+#define XAE_OPTION_VLAN				(1 << 2)
+
+/* Enable recognition of flow control frames on Rx. Default: enabled (set) */
+#define XAE_OPTION_FLOW_CONTROL			(1 << 4)
+
+/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
+ * stripped. Default: disabled (set) */
+#define XAE_OPTION_FCS_STRIP			(1 << 5)
+
+/* Generate FCS field and add PAD automatically for outgoing frames.
+ * Default: enabled (set) */
+#define XAE_OPTION_FCS_INSERT			(1 << 6)
+
+/* Enable Length/Type error checking for incoming frames. When this option is
+ * set, the MAC will filter frames that have a mismatched type/length field
+ * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
+ * types of frames are encountered. When this option is cleared, the MAC will
+ * allow these types of frames to be received. Default: enabled (set) */
+#define XAE_OPTION_LENTYPE_ERR			(1 << 7)
+
+/* Enable the transmitter. Default: enabled (set) */
+#define XAE_OPTION_TXEN				(1 << 11)
+
+/*  Enable the receiver. Default: enabled (set) */
+#define XAE_OPTION_RXEN				(1 << 12)
+
+/*  Default options set when device is initialized or reset */
+#define XAE_OPTION_DEFAULTS				   \
+				(XAE_OPTION_TXEN |	   \
+				 XAE_OPTION_FLOW_CONTROL | \
+				 XAE_OPTION_RXEN)
+
+/* Axi DMA Register definitions */
+
+#define XAXIDMA_TX_CR_OFFSET	0x00000000 /* Channel control */
+#define XAXIDMA_TX_SR_OFFSET	0x00000004 /* Status */
+#define XAXIDMA_TX_CDESC_OFFSET	0x00000008 /* Current descriptor pointer */
+#define XAXIDMA_TX_TDESC_OFFSET	0x00000010 /* Tail descriptor pointer */
+
+#define XAXIDMA_RX_CR_OFFSET	0x00000030 /* Channel control */
+#define XAXIDMA_RX_SR_OFFSET	0x00000034 /* Status */
+#define XAXIDMA_RX_CDESC_OFFSET	0x00000038 /* Current descriptor pointer */
+#define XAXIDMA_RX_TDESC_OFFSET	0x00000040 /* Tail descriptor pointer */
+
+#define XAXIDMA_CR_RUNSTOP_MASK	0x00000001 /* Start/stop DMA channel */
+#define XAXIDMA_CR_RESET_MASK	0x00000004 /* Reset DMA engine */
+
+#define XAXIDMA_BD_NDESC_OFFSET		0x00 /* Next descriptor pointer */
+#define XAXIDMA_BD_BUFA_OFFSET		0x08 /* Buffer address */
+#define XAXIDMA_BD_CTRL_LEN_OFFSET	0x18 /* Control/buffer length */
+#define XAXIDMA_BD_STS_OFFSET		0x1C /* Status */
+#define XAXIDMA_BD_USR0_OFFSET		0x20 /* User IP specific word0 */
+#define XAXIDMA_BD_USR1_OFFSET		0x24 /* User IP specific word1 */
+#define XAXIDMA_BD_USR2_OFFSET		0x28 /* User IP specific word2 */
+#define XAXIDMA_BD_USR3_OFFSET		0x2C /* User IP specific word3 */
+#define XAXIDMA_BD_USR4_OFFSET		0x30 /* User IP specific word4 */
+#define XAXIDMA_BD_ID_OFFSET		0x34 /* Sw ID */
+#define XAXIDMA_BD_HAS_STSCNTRL_OFFSET	0x38 /* Whether has stscntrl strm */
+#define XAXIDMA_BD_HAS_DRE_OFFSET	0x3C /* Whether has DRE */
+
+#define XAXIDMA_BD_HAS_DRE_SHIFT	8 /* Whether has DRE shift */
+#define XAXIDMA_BD_HAS_DRE_MASK		0xF00 /* Whether has DRE mask */
+#define XAXIDMA_BD_WORDLEN_MASK		0xFF /* Whether has DRE mask */
+
+#define XAXIDMA_BD_CTRL_LENGTH_MASK	0x007FFFFF /* Requested len */
+#define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
+#define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
+#define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
+
+#define XAXIDMA_DELAY_MASK		0xFF000000 /* Delay timeout counter */
+#define XAXIDMA_COALESCE_MASK		0x00FF0000 /* Coalesce counter */
+
+#define XAXIDMA_DELAY_SHIFT		24
+#define XAXIDMA_COALESCE_SHIFT		16
+
+#define XAXIDMA_IRQ_IOC_MASK		0x00001000 /* Completion intr */
+#define XAXIDMA_IRQ_DELAY_MASK		0x00002000 /* Delay interrupt */
+#define XAXIDMA_IRQ_ERROR_MASK		0x00004000 /* Error interrupt */
+#define XAXIDMA_IRQ_ALL_MASK		0x00007000 /* All interrupts */
+
+/* Default TX/RX Threshold and waitbound values for SGDMA mode */
+#define XAXIDMA_DFT_TX_THRESHOLD	24
+#define XAXIDMA_DFT_TX_WAITBOUND	254
+#define XAXIDMA_DFT_RX_THRESHOLD	24
+#define XAXIDMA_DFT_RX_WAITBOUND	254
+
+#define XAXIDMA_BD_CTRL_TXSOF_MASK	0x08000000 /* First tx packet */
+#define XAXIDMA_BD_CTRL_TXEOF_MASK	0x04000000 /* Last tx packet */
+#define XAXIDMA_BD_CTRL_ALL_MASK	0x0C000000 /* All control bits */
+
+#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK	0x007FFFFF /* Actual len */
+#define XAXIDMA_BD_STS_COMPLETE_MASK	0x80000000 /* Completed */
+#define XAXIDMA_BD_STS_DEC_ERR_MASK	0x40000000 /* Decode error */
+#define XAXIDMA_BD_STS_SLV_ERR_MASK	0x20000000 /* Slave error */
+#define XAXIDMA_BD_STS_INT_ERR_MASK	0x10000000 /* Internal err */
+#define XAXIDMA_BD_STS_ALL_ERR_MASK	0x70000000 /* All errors */
+#define XAXIDMA_BD_STS_RXSOF_MASK	0x08000000 /* First rx pkt */
+#define XAXIDMA_BD_STS_RXEOF_MASK	0x04000000 /* Last rx pkt */
+#define XAXIDMA_BD_STS_ALL_MASK		0xFC000000 /* All status bits */
+
+#define XAXIDMA_BD_MINIMUM_ALIGNMENT	0x40
+
+/* Axi Ethernet registers definition */
+#define XAE_RAF_OFFSET		0x00000000 /* Reset and Address filter */
+#define XAE_TPF_OFFSET		0x00000004 /* Tx Pause Frame */
+#define XAE_IFGP_OFFSET		0x00000008 /* Tx Inter-frame gap adjustment*/
+#define XAE_IS_OFFSET		0x0000000C /* Interrupt status */
+#define XAE_IP_OFFSET		0x00000010 /* Interrupt pending */
+#define XAE_IE_OFFSET		0x00000014 /* Interrupt enable */
+#define XAE_TTAG_OFFSET		0x00000018 /* Tx VLAN TAG */
+#define XAE_RTAG_OFFSET		0x0000001C /* Rx VLAN TAG */
+#define XAE_UAWL_OFFSET		0x00000020 /* Unicast address word lower */
+#define XAE_UAWU_OFFSET		0x00000024 /* Unicast address word upper */
+#define XAE_TPID0_OFFSET	0x00000028 /* VLAN TPID0 register */
+#define XAE_TPID1_OFFSET	0x0000002C /* VLAN TPID1 register */
+#define XAE_PPST_OFFSET		0x00000030 /* PCS PMA Soft Temac Status Reg */
+#define XAE_RCW0_OFFSET		0x00000400 /* Rx Configuration Word 0 */
+#define XAE_RCW1_OFFSET		0x00000404 /* Rx Configuration Word 1 */
+#define XAE_TC_OFFSET		0x00000408 /* Tx Configuration */
+#define XAE_FCC_OFFSET		0x0000040C /* Flow Control Configuration */
+#define XAE_EMMC_OFFSET		0x00000410 /* EMAC mode configuration */
+#define XAE_PHYC_OFFSET		0x00000414 /* RGMII/SGMII configuration */
+#define XAE_MDIO_MC_OFFSET	0x00000500 /* MII Management Config */
+#define XAE_MDIO_MCR_OFFSET	0x00000504 /* MII Management Control */
+#define XAE_MDIO_MWD_OFFSET	0x00000508 /* MII Management Write Data */
+#define XAE_MDIO_MRD_OFFSET	0x0000050C /* MII Management Read Data */
+#define XAE_MDIO_MIS_OFFSET	0x00000600 /* MII Management Interrupt Status */
+#define XAE_MDIO_MIP_OFFSET	0x00000620 /* MII Mgmt Interrupt Pending
+					    * register offset */
+#define XAE_MDIO_MIE_OFFSET	0x00000640 /* MII Management Interrupt Enable
+					    * register offset */
+#define XAE_MDIO_MIC_OFFSET	0x00000660 /* MII Management Interrupt Clear
+					    * register offset. */
+#define XAE_UAW0_OFFSET		0x00000700 /* Unicast address word 0 */
+#define XAE_UAW1_OFFSET		0x00000704 /* Unicast address word 1 */
+#define XAE_FMI_OFFSET		0x00000708 /* Filter Mask Index */
+#define XAE_AF0_OFFSET		0x00000710 /* Address Filter 0 */
+#define XAE_AF1_OFFSET		0x00000714 /* Address Filter 1 */
+
+#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
+#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
+#define XAE_MCAST_TABLE_OFFSET	0x00020000 /* Multicast table address */
+
+/* Bit Masks for Axi Ethernet RAF register */
+#define XAE_RAF_MCSTREJ_MASK		0x00000002 /* Reject receive multicast
+						    * destination address */
+#define XAE_RAF_BCSTREJ_MASK		0x00000004 /* Reject receive broadcast
+						    * destination address */
+#define XAE_RAF_TXVTAGMODE_MASK		0x00000018 /* Tx VLAN TAG mode */
+#define XAE_RAF_RXVTAGMODE_MASK		0x00000060 /* Rx VLAN TAG mode */
+#define XAE_RAF_TXVSTRPMODE_MASK	0x00000180 /* Tx VLAN STRIP mode */
+#define XAE_RAF_RXVSTRPMODE_MASK	0x00000600 /* Rx VLAN STRIP mode */
+#define XAE_RAF_NEWFNCENBL_MASK		0x00000800 /* New function mode */
+#define XAE_RAF_EMULTIFLTRENBL_MASK	0x00001000 /* Exteneded Multicast
+						    * Filtering mode
+						    */
+#define XAE_RAF_STATSRST_MASK		0x00002000 /* Stats. Counter Reset */
+#define XAE_RAF_RXBADFRMEN_MASK		0x00004000 /* Recv Bad Frame Enable */
+#define XAE_RAF_TXVTAGMODE_SHIFT	3 /* Tx Tag mode shift bits */
+#define XAE_RAF_RXVTAGMODE_SHIFT	5 /* Rx Tag mode shift bits */
+#define XAE_RAF_TXVSTRPMODE_SHIFT	7 /* Tx strip mode shift bits*/
+#define XAE_RAF_RXVSTRPMODE_SHIFT	9 /* Rx Strip mode shift bits*/
+
+/* Bit Masks for Axi Ethernet TPF and IFGP registers */
+#define XAE_TPF_TPFV_MASK		0x0000FFFF /* Tx pause frame value */
+#define XAE_IFGP0_IFGP_MASK		0x0000007F /* Transmit inter-frame
+						    * gap adjustment value */
+
+/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
+ * for all 3 registers. */
+#define XAE_INT_HARDACSCMPLT_MASK	0x00000001 /* Hard register access
+						    * complete */
+#define XAE_INT_AUTONEG_MASK		0x00000002 /* Auto negotiation
+						    * complete */
+#define XAE_INT_RXCMPIT_MASK		0x00000004 /* Rx complete */
+#define XAE_INT_RXRJECT_MASK		0x00000008 /* Rx frame rejected */
+#define XAE_INT_RXFIFOOVR_MASK		0x00000010 /* Rx fifo overrun */
+#define XAE_INT_TXCMPIT_MASK		0x00000020 /* Tx complete */
+#define XAE_INT_RXDCMLOCK_MASK		0x00000040 /* Rx Dcm Lock */
+#define XAE_INT_MGTRDY_MASK		0x00000080 /* MGT clock Lock */
+#define XAE_INT_PHYRSTCMPLT_MASK	0x00000100 /* Phy Reset complete */
+#define XAE_INT_ALL_MASK		0x0000003F /* All the ints */
+
+#define XAE_INT_RECV_ERROR_MASK				\
+	(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
+							 * indicate receive
+							 * errors */
+
+/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
+#define XAE_TPID_0_MASK		0x0000FFFF /* TPID 0 */
+#define XAE_TPID_1_MASK		0xFFFF0000 /* TPID 1 */
+
+/* Bit masks for Axi Ethernet VLAN TPID Word 1 register */
+#define XAE_TPID_2_MASK		0x0000FFFF /* TPID 0 */
+#define XAE_TPID_3_MASK		0xFFFF0000 /* TPID 1 */
+
+/* Bit masks for Axi Ethernet RCW1 register */
+#define XAE_RCW1_RST_MASK	0x80000000 /* Reset */
+#define XAE_RCW1_JUM_MASK	0x40000000 /* Jumbo frame enable */
+#define XAE_RCW1_FCS_MASK	0x20000000 /* In-Band FCS enable
+					    * (FCS not stripped) */
+#define XAE_RCW1_RX_MASK	0x10000000 /* Receiver enable */
+#define XAE_RCW1_VLAN_MASK	0x08000000 /* VLAN frame enable */
+#define XAE_RCW1_LT_DIS_MASK	0x02000000 /* Length/type field valid check
+					    * disable */
+#define XAE_RCW1_CL_DIS_MASK	0x01000000 /* Control frame Length check
+					    * disable */
+#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
+					    * bits [47:32]. Bits [31:0] are
+					    * stored in register RCW0 */
+
+/* Bit masks for Axi Ethernet TC register */
+#define XAE_TC_RST_MASK		0x80000000 /* Reset */
+#define XAE_TC_JUM_MASK		0x40000000 /* Jumbo frame enable */
+#define XAE_TC_FCS_MASK		0x20000000 /* In-Band FCS enable
+					    * (FCS not generated) */
+#define XAE_TC_TX_MASK		0x10000000 /* Transmitter enable */
+#define XAE_TC_VLAN_MASK	0x08000000 /* VLAN frame enable */
+#define XAE_TC_IFG_MASK		0x02000000 /* Inter-frame gap adjustment
+					    * enable */
+
+/* Bit masks for Axi Ethernet FCC register */
+#define XAE_FCC_FCRX_MASK	0x20000000 /* Rx flow control enable */
+#define XAE_FCC_FCTX_MASK	0x40000000 /* Tx flow control enable */
+
+/* Bit masks for Axi Ethernet EMMC register */
+#define XAE_EMMC_LINKSPEED_MASK	0xC0000000 /* Link speed */
+#define XAE_EMMC_RGMII_MASK	0x20000000 /* RGMII mode enable */
+#define XAE_EMMC_SGMII_MASK	0x10000000 /* SGMII mode enable */
+#define XAE_EMMC_GPCS_MASK	0x08000000 /* 1000BaseX mode enable */
+#define XAE_EMMC_HOST_MASK	0x04000000 /* Host interface enable */
+#define XAE_EMMC_TX16BIT	0x02000000 /* 16 bit Tx client enable */
+#define XAE_EMMC_RX16BIT	0x01000000 /* 16 bit Rx client enable */
+#define XAE_EMMC_LINKSPD_10	0x00000000 /* Link Speed mask for 10 Mbit */
+#define XAE_EMMC_LINKSPD_100	0x40000000 /* Link Speed mask for 100 Mbit */
+#define XAE_EMMC_LINKSPD_1000	0x80000000 /* Link Speed mask for 1000 Mbit */
+
+/* Bit masks for Axi Ethernet PHYC register */
+#define XAE_PHYC_SGMIILINKSPEED_MASK	0xC0000000 /* SGMII link speed mask*/
+#define XAE_PHYC_RGMIILINKSPEED_MASK	0x0000000C /* RGMII link speed */
+#define XAE_PHYC_RGMIIHD_MASK		0x00000002 /* RGMII Half-duplex */
+#define XAE_PHYC_RGMIILINK_MASK		0x00000001 /* RGMII link status */
+#define XAE_PHYC_RGLINKSPD_10		0x00000000 /* RGMII link 10 Mbit */
+#define XAE_PHYC_RGLINKSPD_100		0x00000004 /* RGMII link 100 Mbit */
+#define XAE_PHYC_RGLINKSPD_1000		0x00000008 /* RGMII link 1000 Mbit */
+#define XAE_PHYC_SGLINKSPD_10		0x00000000 /* SGMII link 10 Mbit */
+#define XAE_PHYC_SGLINKSPD_100		0x40000000 /* SGMII link 100 Mbit */
+#define XAE_PHYC_SGLINKSPD_1000		0x80000000 /* SGMII link 1000 Mbit */
+
+/* Bit masks for Axi Ethernet MDIO interface MC register */
+#define XAE_MDIO_MC_MDIOEN_MASK		0x00000040 /* MII management enable */
+#define XAE_MDIO_MC_CLOCK_DIVIDE_MAX	0x3F	   /* Maximum MDIO divisor */
+
+/* Bit masks for Axi Ethernet MDIO interface MCR register */
+#define XAE_MDIO_MCR_PHYAD_MASK		0x1F000000 /* Phy Address Mask */
+#define XAE_MDIO_MCR_PHYAD_SHIFT	24	   /* Phy Address Shift */
+#define XAE_MDIO_MCR_REGAD_MASK		0x001F0000 /* Reg Address Mask */
+#define XAE_MDIO_MCR_REGAD_SHIFT	16	   /* Reg Address Shift */
+#define XAE_MDIO_MCR_OP_MASK		0x0000C000 /* Operation Code Mask */
+#define XAE_MDIO_MCR_OP_SHIFT		13	   /* Operation Code Shift */
+#define XAE_MDIO_MCR_OP_READ_MASK	0x00008000 /* Op Code Read Mask */
+#define XAE_MDIO_MCR_OP_WRITE_MASK	0x00004000 /* Op Code Write Mask */
+#define XAE_MDIO_MCR_INITIATE_MASK	0x00000800 /* Ready Mask */
+#define XAE_MDIO_MCR_READY_MASK		0x00000080 /* Ready Mask */
+
+/* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */
+#define XAE_MDIO_INT_MIIM_RDY_MASK	0x00000001 /* MIIM Interrupt */
+
+/* Bit masks for Axi Ethernet UAW1 register */
+#define XAE_UAW1_UNICASTADDR_MASK	0x0000FFFF /* Station address bits
+						    * [47:32]; Station address
+						    * bits [31:0] are stored in
+						    * register UAW0 */
+
+/* Bit masks for Axi Ethernet FMI register */
+#define XAE_FMI_PM_MASK			0x80000000 /* Promis. mode enable */
+#define XAE_FMI_IND_MASK		0x00000003 /* Index Mask */
+
+#define XAE_MDIO_DIV_DFT		29 /* Default MDIO clock divisor */
+
+/* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */
+#define XAE_PHY_TYPE_MII		0
+#define XAE_PHY_TYPE_GMII		1
+#define XAE_PHY_TYPE_RGMII_1_3		2
+#define XAE_PHY_TYPE_RGMII_2_0		3
+#define XAE_PHY_TYPE_SGMII		4
+#define XAE_PHY_TYPE_1000BASE_X		5
+
+#define XAE_MULTICAST_CAM_TABLE_NUM	4 /* Total number of entries in the
+					   * hardware multicast table. */
+
+/* Axi Ethernet Synthesis features */
+#define XAE_FEATURE_PARTIAL_RX_CSUM	(1 << 0)
+#define XAE_FEATURE_PARTIAL_TX_CSUM	(1 << 1)
+#define XAE_FEATURE_FULL_RX_CSUM	(1 << 2)
+#define XAE_FEATURE_FULL_TX_CSUM	(1 << 3)
+
+#define XAE_NO_CSUM_OFFLOAD		0
+
+#define XAE_FULL_CSUM_STATUS_MASK	0x00000038
+#define XAE_IP_UDP_CSUM_VALIDATED	0x00000003
+#define XAE_IP_TCP_CSUM_VALIDATED	0x00000002
+
+#define DELAY_OF_ONE_MILLISEC		1000
+
+/**
+ * struct axidma_bd - Axi Dma buffer descriptor layout
+ * @next:         MM2S/S2MM Next Descriptor Pointer
+ * @reserved1:    Reserved and not used
+ * @phys:         MM2S/S2MM Buffer Address
+ * @reserved2:    Reserved and not used
+ * @reserved3:    Reserved and not used
+ * @reserved4:    Reserved and not used
+ * @cntrl:        MM2S/S2MM Control value
+ * @status:       MM2S/S2MM Status value
+ * @app0:         MM2S/S2MM User Application Field 0.
+ * @app1:         MM2S/S2MM User Application Field 1.
+ * @app2:         MM2S/S2MM User Application Field 2.
+ * @app3:         MM2S/S2MM User Application Field 3.
+ * @app4:         MM2S/S2MM User Application Field 4.
+ * @sw_id_offset: MM2S/S2MM Sw ID
+ * @reserved5:    Reserved and not used
+ * @reserved6:    Reserved and not used
+ */
+struct axidma_bd {
+	u32 next;	/* Physical address of next buffer descriptor */
+	u32 reserved1;
+	u32 phys;
+	u32 reserved2;
+	u32 reserved3;
+	u32 reserved4;
+	u32 cntrl;
+	u32 status;
+	u32 app0;
+	u32 app1;	/* TX start << 16 | insert */
+	u32 app2;	/* TX csum seed */
+	u32 app3;
+	u32 app4;
+	u32 sw_id_offset;
+	u32 reserved5;
+	u32 reserved6;
+};
+
+/**
+ * struct axienet_local - axienet private per device data
+ * @ndev:	Pointer for net_device to which it will be attached.
+ * @dev:	Pointer to device structure
+ * @phy_dev:	Pointer to PHY device structure attached to the axienet_local
+ * @phy_node:	Pointer to device node structure
+ * @mii_bus:	Pointer to MII bus structure
+ * @mdio_irqs:	IRQs table for MDIO bus required in mii_bus structure
+ * @regs:	Base address for the axienet_local device address space
+ * @dma_regs:	Base address for the axidma device address space
+ * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
+ * @tx_irq:	Axidma TX IRQ number
+ * @rx_irq:	Axidma RX IRQ number
+ * @temac_type:	axienet type to identify between soft and hard temac
+ * @phy_type:	Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
+ * @options:	AxiEthernet option word
+ * @last_link:	Phy link state in which the PHY was negotiated earlier
+ * @features:	Stores the extended features supported by the axienet hw
+ * @tx_bd_v:	Virtual address of the TX buffer descriptor ring
+ * @tx_bd_p:	Physical address(start address) of the TX buffer descr. ring
+ * @rx_bd_v:	Virtual address of the RX buffer descriptor ring
+ * @rx_bd_p:	Physical address(start address) of the RX buffer descr. ring
+ * @tx_bd_ci:	Stores the index of the Tx buffer descriptor in the ring being
+ *		accessed currently. Used while alloc. BDs before a TX starts
+ * @tx_bd_tail:	Stores the index of the Tx buffer descriptor in the ring being
+ *		accessed currently. Used while processing BDs after the TX
+ *		completed.
+ * @rx_bd_ci:	Stores the index of the Rx buffer descriptor in the ring being
+ *		accessed currently.
+ * @max_frm_size: Stores the maximum size of the frame that can be that
+ *		  Txed/Rxed in the existing hardware. If jumbo option is
+ *		  supported, the maximum frame size would be 9k. Else it is
+ *		  1522 bytes (assuming support for basic VLAN)
+ * @jumbo_support: Stores hardware configuration for jumbo support. If hardware
+ *		   can handle jumbo packets, this entry will be 1, else 0.
+ */
+struct axienet_local {
+	struct net_device *ndev;
+	struct device *dev;
+
+	/* Connection to PHY device */
+	struct phy_device *phy_dev;	/* Pointer to PHY device */
+	struct device_node *phy_node;
+
+	/* MDIO bus data */
+	struct mii_bus *mii_bus;	/* MII bus reference */
+	int mdio_irqs[PHY_MAX_ADDR];	/* IRQs table for MDIO bus */
+
+	/* IO registers, dma functions and IRQs */
+	void __iomem *regs;
+	void __iomem *dma_regs;
+
+	struct tasklet_struct dma_err_tasklet;
+
+	int tx_irq;
+	int rx_irq;
+	u32 temac_type;
+	u32 phy_type;
+
+	u32 options;			/* Current options word */
+	u32 last_link;
+	u32 features;
+
+	/* Buffer descriptors */
+	struct axidma_bd *tx_bd_v;
+	dma_addr_t tx_bd_p;
+	struct axidma_bd *rx_bd_v;
+	dma_addr_t rx_bd_p;
+	u32 tx_bd_ci;
+	u32 tx_bd_tail;
+	u32 rx_bd_ci;
+
+	u32 max_frm_size;
+	u32 jumbo_support;
+
+	int csum_offload_on_tx_path;
+	int csum_offload_on_rx_path;
+
+	u32 coalesce_count_rx;
+	u32 coalesce_count_tx;
+};
+
+/**
+ * struct axiethernet_option - Used to set axi ethernet hardware options
+ * @opt:	Option to be set.
+ * @reg:	Register offset to be written for setting the option
+ * @m_or:	Mask to be ORed for setting the option in the register
+ */
+struct axienet_option {
+	u32 opt;
+	u32 reg;
+	u32 m_or;
+};
+
+/**
+ * axienet_ior - Memory mapped Axi Ethernet register read
+ * @lp:         Pointer to axienet local structure
+ * @offset:     Address offset from the base address of Axi Ethernet core
+ *
+ * returns: The contents of the Axi Ethernet register
+ *
+ * This function returns the contents of the corresponding register.
+ */
+static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
+{
+	return in_be32(lp->regs + offset);
+}
+
+/**
+ * axienet_iow - Memory mapped Axi Ethernet register write
+ * @lp:         Pointer to axienet local structure
+ * @offset:     Address offset from the base address of Axi Ethernet core
+ * @value:      Value to be written into the Axi Ethernet register
+ *
+ * This function writes the desired value into the corresponding Axi Ethernet
+ * register.
+ */
+static inline void axienet_iow(struct axienet_local *lp, off_t offset,
+			       u32 value)
+{
+	out_be32((lp->regs + offset), value);
+}
+
+/* Function prototypes visible in xilinx_axienet_mdio.c for other files */
+int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np);
+int axienet_mdio_wait_until_ready(struct axienet_local *lp);
+void axienet_mdio_teardown(struct axienet_local *lp);
+
+#endif /* XILINX_AXI_ENET_H */
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
new file mode 100644
index 0000000..ea50caf
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -0,0 +1,1682 @@
+/*
+ * Xilinx Axi Ethernet device driver
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd.,  Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems,  David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ * Copyright (c) 2010 Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch>
+ * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch>
+ *
+ * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6
+ * and Spartan6.
+ *
+ * TODO:
+ *  - Add Axi Fifo support.
+ *  - Factor out Axi DMA code into separate driver.
+ *  - Test and fix basic multicast filtering.
+ *  - Add support for extended multicast filtering.
+ *  - Test basic VLAN support.
+ *  - Add support for extended VLAN support.
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include "xilinx_axienet.h"
+
+/* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */
+#define TX_BD_NUM		64
+#define RX_BD_NUM		128
+
+/* Must be shorter than length of ethtool_drvinfo.driver field to fit */
+#define DRIVER_NAME		"xaxienet"
+#define DRIVER_DESCRIPTION	"Xilinx Axi Ethernet driver"
+#define DRIVER_VERSION		"1.00a"
+
+#define AXIENET_REGS_N		32
+
+/* Match table for of_platform binding */
+static struct of_device_id axienet_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,axi-ethernet-1.00.a", },
+	{ .compatible = "xlnx,axi-ethernet-1.01.a", },
+	{ .compatible = "xlnx,axi-ethernet-2.01.a", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, axienet_of_match);
+
+/* Option table for setting up Axi Ethernet hardware options */
+static struct axienet_option axienet_options[] = {
+	/* Turn on jumbo packet support for both Rx and Tx */
+	{
+		.opt = XAE_OPTION_JUMBO,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_JUM_MASK,
+	}, {
+		.opt = XAE_OPTION_JUMBO,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_JUM_MASK,
+	}, { /* Turn on VLAN packet support for both Rx and Tx */
+		.opt = XAE_OPTION_VLAN,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_VLAN_MASK,
+	}, {
+		.opt = XAE_OPTION_VLAN,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_VLAN_MASK,
+	}, { /* Turn on FCS stripping on receive packets */
+		.opt = XAE_OPTION_FCS_STRIP,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_FCS_MASK,
+	}, { /* Turn on FCS insertion on transmit packets */
+		.opt = XAE_OPTION_FCS_INSERT,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_FCS_MASK,
+	}, { /* Turn off length/type field checking on receive packets */
+		.opt = XAE_OPTION_LENTYPE_ERR,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_LT_DIS_MASK,
+	}, { /* Turn on Rx flow control */
+		.opt = XAE_OPTION_FLOW_CONTROL,
+		.reg = XAE_FCC_OFFSET,
+		.m_or = XAE_FCC_FCRX_MASK,
+	}, { /* Turn on Tx flow control */
+		.opt = XAE_OPTION_FLOW_CONTROL,
+		.reg = XAE_FCC_OFFSET,
+		.m_or = XAE_FCC_FCTX_MASK,
+	}, { /* Turn on promiscuous frame filtering */
+		.opt = XAE_OPTION_PROMISC,
+		.reg = XAE_FMI_OFFSET,
+		.m_or = XAE_FMI_PM_MASK,
+	}, { /* Enable transmitter */
+		.opt = XAE_OPTION_TXEN,
+		.reg = XAE_TC_OFFSET,
+		.m_or = XAE_TC_TX_MASK,
+	}, { /* Enable receiver */
+		.opt = XAE_OPTION_RXEN,
+		.reg = XAE_RCW1_OFFSET,
+		.m_or = XAE_RCW1_RX_MASK,
+	},
+	{}
+};
+
+/**
+ * axienet_dma_in32 - Memory mapped Axi DMA register read
+ * @lp:		Pointer to axienet local structure
+ * @reg:	Address offset from the base address of the Axi DMA core
+ *
+ * returns: The contents of the Axi DMA register
+ *
+ * This function returns the contents of the corresponding Axi DMA register.
+ */
+static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg)
+{
+	return in_be32(lp->dma_regs + reg);
+}
+
+/**
+ * axienet_dma_out32 - Memory mapped Axi DMA register write.
+ * @lp:		Pointer to axienet local structure
+ * @reg:	Address offset from the base address of the Axi DMA core
+ * @value:	Value to be written into the Axi DMA register
+ *
+ * This function writes the desired value into the corresponding Axi DMA
+ * register.
+ */
+static inline void axienet_dma_out32(struct axienet_local *lp,
+				     off_t reg, u32 value)
+{
+	out_be32((lp->dma_regs + reg), value);
+}
+
+/**
+ * axienet_dma_bd_release - Release buffer descriptor rings
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is used to release the descriptors allocated in
+ * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet
+ * driver stop api is called.
+ */
+static void axienet_dma_bd_release(struct net_device *ndev)
+{
+	int i;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	for (i = 0; i < RX_BD_NUM; i++) {
+		dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
+				 lp->max_frm_size, DMA_FROM_DEVICE);
+		dev_kfree_skb((struct sk_buff *)
+			      (lp->rx_bd_v[i].sw_id_offset));
+	}
+
+	if (lp->rx_bd_v) {
+		dma_free_coherent(ndev->dev.parent,
+				  sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+				  lp->rx_bd_v,
+				  lp->rx_bd_p);
+	}
+	if (lp->tx_bd_v) {
+		dma_free_coherent(ndev->dev.parent,
+				  sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+				  lp->tx_bd_v,
+				  lp->tx_bd_p);
+	}
+}
+
+/**
+ * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA
+ * @ndev:	Pointer to the net_device structure
+ *
+ * returns: 0, on success
+ *	    -ENOMEM, on failure
+ *
+ * This function is called to initialize the Rx and Tx DMA descriptor
+ * rings. This initializes the descriptors with required default values
+ * and is called when Axi Ethernet driver reset is called.
+ */
+static int axienet_dma_bd_init(struct net_device *ndev)
+{
+	u32 cr;
+	int i;
+	struct sk_buff *skb;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	/* Reset the indexes which are used for accessing the BDs */
+	lp->tx_bd_ci = 0;
+	lp->tx_bd_tail = 0;
+	lp->rx_bd_ci = 0;
+
+	/*
+	 * Allocate the Tx and Rx buffer descriptors.
+	 */
+	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+					 &lp->tx_bd_p,
+					 GFP_KERNEL);
+	if (!lp->tx_bd_v) {
+		dev_err(&ndev->dev, "unable to allocate DMA Tx buffer "
+			"descriptors");
+		goto out;
+	}
+
+	lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+					 &lp->rx_bd_p,
+					 GFP_KERNEL);
+	if (!lp->rx_bd_v) {
+		dev_err(&ndev->dev, "unable to allocate DMA Rx buffer "
+			"descriptors");
+		goto out;
+	}
+
+	memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
+	for (i = 0; i < TX_BD_NUM; i++) {
+		lp->tx_bd_v[i].next = lp->tx_bd_p +
+				      sizeof(*lp->tx_bd_v) *
+				      ((i + 1) % TX_BD_NUM);
+	}
+
+	memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
+	for (i = 0; i < RX_BD_NUM; i++) {
+		lp->rx_bd_v[i].next = lp->rx_bd_p +
+				      sizeof(*lp->rx_bd_v) *
+				      ((i + 1) % RX_BD_NUM);
+
+		skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
+		if (!skb) {
+			dev_err(&ndev->dev, "alloc_skb error %d\n", i);
+			goto out;
+		}
+
+		lp->rx_bd_v[i].sw_id_offset = (u32) skb;
+		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
+						     skb->data,
+						     lp->max_frm_size,
+						     DMA_FROM_DEVICE);
+		lp->rx_bd_v[i].cntrl = lp->max_frm_size;
+	}
+
+	/* Start updating the Rx channel control register */
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	/* Update the interrupt coalesce count */
+	cr = ((cr & ~XAXIDMA_COALESCE_MASK) |
+	      ((lp->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT));
+	/* Update the delay timer count */
+	cr = ((cr & ~XAXIDMA_DELAY_MASK) |
+	      (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
+	/* Enable coalesce, delay timer and error interrupts */
+	cr |= XAXIDMA_IRQ_ALL_MASK;
+	/* Write to the Rx channel control register */
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+	/* Start updating the Tx channel control register */
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	/* Update the interrupt coalesce count */
+	cr = (((cr & ~XAXIDMA_COALESCE_MASK)) |
+	      ((lp->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT));
+	/* Update the delay timer count */
+	cr = (((cr & ~XAXIDMA_DELAY_MASK)) |
+	      (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
+	/* Enable coalesce, delay timer and error interrupts */
+	cr |= XAXIDMA_IRQ_ALL_MASK;
+	/* Write to the Tx channel control register */
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
+	 * halted state. This will make the Rx side ready for reception.*/
+	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
+			  cr | XAXIDMA_CR_RUNSTOP_MASK);
+	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+			  (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+
+	/* Write to the RS (Run-stop) bit in the Tx channel control register.
+	 * Tx channel is now ready to run. But only after we write to the
+	 * tail pointer register that the Tx channel will start transmitting */
+	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
+			  cr | XAXIDMA_CR_RUNSTOP_MASK);
+
+	return 0;
+out:
+	axienet_dma_bd_release(ndev);
+	return -ENOMEM;
+}
+
+/**
+ * axienet_set_mac_address - Write the MAC address
+ * @ndev:	Pointer to the net_device structure
+ * @address:	6 byte Address to be written as MAC address
+ *
+ * This function is called to initialize the MAC address of the Axi Ethernet
+ * core. It writes to the UAW0 and UAW1 registers of the core.
+ */
+static void axienet_set_mac_address(struct net_device *ndev, void *address)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (address)
+		memcpy(ndev->dev_addr, address, ETH_ALEN);
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		random_ether_addr(ndev->dev_addr);
+
+	/* Set up unicast MAC address filter set its mac address */
+	axienet_iow(lp, XAE_UAW0_OFFSET,
+		    (ndev->dev_addr[0]) |
+		    (ndev->dev_addr[1] << 8) |
+		    (ndev->dev_addr[2] << 16) |
+		    (ndev->dev_addr[3] << 24));
+	axienet_iow(lp, XAE_UAW1_OFFSET,
+		    (((axienet_ior(lp, XAE_UAW1_OFFSET)) &
+		      ~XAE_UAW1_UNICASTADDR_MASK) |
+		     (ndev->dev_addr[4] |
+		     (ndev->dev_addr[5] << 8))));
+}
+
+/**
+ * netdev_set_mac_address - Write the MAC address (from outside the driver)
+ * @ndev:	Pointer to the net_device structure
+ * @p:		6 byte Address to be written as MAC address
+ *
+ * returns: 0 for all conditions. Presently, there is no failure case.
+ *
+ * This function is called to initialize the MAC address of the Axi Ethernet
+ * core. It calls the core specific axienet_set_mac_address. This is the
+ * function that goes into net_device_ops structure entry ndo_set_mac_address.
+ */
+static int netdev_set_mac_address(struct net_device *ndev, void *p)
+{
+	struct sockaddr *addr = p;
+	axienet_set_mac_address(ndev, addr->sa_data);
+	return 0;
+}
+
+/**
+ * axienet_set_multicast_list - Prepare the multicast table
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is called to initialize the multicast table during
+ * initialization. The Axi Ethernet basic multicast support has a four-entry
+ * multicast table which is initialized here. Additionally this function
+ * goes into the net_device_ops structure entry ndo_set_multicast_list. This
+ * means whenever the multicast table entries need to be updated this
+ * function gets called.
+ */
+static void axienet_set_multicast_list(struct net_device *ndev)
+{
+	int i;
+	u32 reg, af0reg, af1reg;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
+	    netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
+		/* We must make the kernel realize we had to move into
+		 * promiscuous mode. If it was a promiscuous mode request
+		 * the flag is already set. If not we set it. */
+		ndev->flags |= IFF_PROMISC;
+		reg = axienet_ior(lp, XAE_FMI_OFFSET);
+		reg |= XAE_FMI_PM_MASK;
+		axienet_iow(lp, XAE_FMI_OFFSET, reg);
+		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+	} else if (!netdev_mc_empty(ndev)) {
+		struct netdev_hw_addr *ha;
+
+		i = 0;
+		netdev_for_each_mc_addr(ha, ndev) {
+			if (i >= XAE_MULTICAST_CAM_TABLE_NUM)
+				break;
+
+			af0reg = (ha->addr[0]);
+			af0reg |= (ha->addr[1] << 8);
+			af0reg |= (ha->addr[2] << 16);
+			af0reg |= (ha->addr[3] << 24);
+
+			af1reg = (ha->addr[4]);
+			af1reg |= (ha->addr[5] << 8);
+
+			reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
+			reg |= i;
+
+			axienet_iow(lp, XAE_FMI_OFFSET, reg);
+			axienet_iow(lp, XAE_AF0_OFFSET, af0reg);
+			axienet_iow(lp, XAE_AF1_OFFSET, af1reg);
+			i++;
+		}
+	} else {
+		reg = axienet_ior(lp, XAE_FMI_OFFSET);
+		reg &= ~XAE_FMI_PM_MASK;
+
+		axienet_iow(lp, XAE_FMI_OFFSET, reg);
+
+		for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) {
+			reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
+			reg |= i;
+
+			axienet_iow(lp, XAE_FMI_OFFSET, reg);
+			axienet_iow(lp, XAE_AF0_OFFSET, 0);
+			axienet_iow(lp, XAE_AF1_OFFSET, 0);
+		}
+
+		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+	}
+}
+
+/**
+ * axienet_setoptions - Set an Axi Ethernet option
+ * @ndev:	Pointer to the net_device structure
+ * @options:	Option to be enabled/disabled
+ *
+ * The Axi Ethernet core has multiple features which can be selectively turned
+ * on or off. The typical options could be jumbo frame option, basic VLAN
+ * option, promiscuous mode option etc. This function is used to set or clear
+ * these options in the Axi Ethernet hardware. This is done through
+ * axienet_option structure .
+ */
+static void axienet_setoptions(struct net_device *ndev, u32 options)
+{
+	int reg;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct axienet_option *tp = &axienet_options[0];
+
+	while (tp->opt) {
+		reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or));
+		if (options & tp->opt)
+			reg |= tp->m_or;
+		axienet_iow(lp, tp->reg, reg);
+		tp++;
+	}
+
+	lp->options |= options;
+}
+
+static void __axienet_device_reset(struct axienet_local *lp,
+				   struct device *dev, off_t offset)
+{
+	u32 timeout;
+	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
+	 * process of Axi DMA takes a while to complete as all pending
+	 * commands/transfers will be flushed or completed during this
+	 * reset process. */
+	axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK);
+	timeout = DELAY_OF_ONE_MILLISEC;
+	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(dev, "axienet_device_reset DMA "
+				"reset timeout!\n");
+			break;
+		}
+	}
+}
+
+/**
+ * axienet_device_reset - Reset and initialize the Axi Ethernet hardware.
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is called to reset and initialize the Axi Ethernet core. This
+ * is typically called during initialization. It does a reset of the Axi DMA
+ * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
+ * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
+ * Ethernet core. No separate hardware reset is done for the Axi Ethernet
+ * core.
+ */
+static void axienet_device_reset(struct net_device *ndev)
+{
+	u32 axienet_status;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET);
+	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET);
+
+	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
+	lp->options &= (~XAE_OPTION_JUMBO);
+
+	if ((ndev->mtu > XAE_MTU) &&
+	    (ndev->mtu <= XAE_JUMBO_MTU) &&
+	    (lp->jumbo_support)) {
+		lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE +
+				   XAE_TRL_SIZE;
+		lp->options |= XAE_OPTION_JUMBO;
+	}
+
+	if (axienet_dma_bd_init(ndev)) {
+		dev_err(&ndev->dev, "axienet_device_reset descriptor "
+			"allocation failed\n");
+	}
+
+	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
+	axienet_status &= ~XAE_RCW1_RX_MASK;
+	axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status);
+
+	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
+	if (axienet_status & XAE_INT_RXRJECT_MASK)
+		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+
+	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
+
+	/* Sync default options with HW but leave receiver and
+	 * transmitter disabled.*/
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+	axienet_set_mac_address(ndev, NULL);
+	axienet_set_multicast_list(ndev);
+	axienet_setoptions(ndev, lp->options);
+
+	ndev->trans_start = jiffies;
+}
+
+/**
+ * axienet_adjust_link - Adjust the PHY link speed/duplex.
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is called to change the speed and duplex setting after
+ * auto negotiation is done by the PHY. This is the function that gets
+ * registered with the PHY interface through the "of_phy_connect" call.
+ */
+static void axienet_adjust_link(struct net_device *ndev)
+{
+	u32 emmc_reg;
+	u32 link_state;
+	u32 setspeed = 1;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct phy_device *phy = lp->phy_dev;
+
+	link_state = phy->speed | (phy->duplex << 1) | phy->link;
+	if (lp->last_link != link_state) {
+		if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) {
+			if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X)
+				setspeed = 0;
+		} else {
+			if ((phy->speed == SPEED_1000) &&
+			    (lp->phy_type == XAE_PHY_TYPE_MII))
+				setspeed = 0;
+		}
+
+		if (setspeed == 1) {
+			emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
+			emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
+
+			switch (phy->speed) {
+			case SPEED_1000:
+				emmc_reg |= XAE_EMMC_LINKSPD_1000;
+				break;
+			case SPEED_100:
+				emmc_reg |= XAE_EMMC_LINKSPD_100;
+				break;
+			case SPEED_10:
+				emmc_reg |= XAE_EMMC_LINKSPD_10;
+				break;
+			default:
+				dev_err(&ndev->dev, "Speed other than 10, 100 "
+					"or 1Gbps is not supported\n");
+				break;
+			}
+
+			axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
+			lp->last_link = link_state;
+			phy_print_status(phy);
+		} else {
+			dev_err(&ndev->dev, "Error setting Axi Ethernet "
+				"mac speed\n");
+		}
+	}
+}
+
+/**
+ * axienet_start_xmit_done - Invoked once a transmit is completed by the
+ * Axi DMA Tx channel.
+ * @ndev:	Pointer to the net_device structure
+ *
+ * This function is invoked from the Axi DMA Tx isr to notify the completion
+ * of transmit operation. It clears fields in the corresponding Tx BDs and
+ * unmaps the corresponding buffer so that CPU can regain ownership of the
+ * buffer. It finally invokes "netif_wake_queue" to restart transmission if
+ * required.
+ */
+static void axienet_start_xmit_done(struct net_device *ndev)
+{
+	u32 size = 0;
+	u32 packets = 0;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct axidma_bd *cur_p;
+	unsigned int status = 0;
+
+	cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+	status = cur_p->status;
+	while (status & XAXIDMA_BD_STS_COMPLETE_MASK) {
+		dma_unmap_single(ndev->dev.parent, cur_p->phys,
+				(cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
+				DMA_TO_DEVICE);
+		if (cur_p->app4)
+			dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
+		/*cur_p->phys = 0;*/
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app4 = 0;
+		cur_p->status = 0;
+
+		size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
+		packets++;
+
+		lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM;
+		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+		status = cur_p->status;
+	}
+
+	ndev->stats.tx_packets += packets;
+	ndev->stats.tx_bytes += size;
+	netif_wake_queue(ndev);
+}
+
+/**
+ * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
+ * @lp:		Pointer to the axienet_local structure
+ * @num_frag:	The number of BDs to check for
+ *
+ * returns: 0, on success
+ *	    NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked before BDs are allocated and transmission starts.
+ * This function returns 0 if a BD or group of BDs can be allocated for
+ * transmission. If the BD or any of the BDs are not free the function
+ * returns a busy status. This is invoked from axienet_start_xmit.
+ */
+static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
+					    int num_frag)
+{
+	struct axidma_bd *cur_p;
+	cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM];
+	if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
+		return NETDEV_TX_BUSY;
+	return 0;
+}
+
+/**
+ * axienet_start_xmit - Starts the transmission.
+ * @skb:	sk_buff pointer that contains data to be Txed.
+ * @ndev:	Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ *	    NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked from upper layers to initiate transmission. The
+ * function uses the next available free BDs and populates their fields to
+ * start the transmission. Additionally if checksum offloading is supported,
+ * it populates AXI Stream Control fields with appropriate values.
+ */
+static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	u32 ii;
+	u32 num_frag;
+	u32 csum_start_off;
+	u32 csum_index_off;
+	skb_frag_t *frag;
+	dma_addr_t tail_p;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct axidma_bd *cur_p;
+
+	num_frag = skb_shinfo(skb)->nr_frags;
+	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+
+	if (axienet_check_tx_bd_space(lp, num_frag)) {
+		if (!netif_queue_stopped(ndev))
+			netif_stop_queue(ndev);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (lp->features & XAE_FEATURE_FULL_TX_CSUM) {
+			/* Tx Full Checksum Offload Enabled */
+			cur_p->app0 |= 2;
+		} else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) {
+			csum_start_off = skb_transport_offset(skb);
+			csum_index_off = csum_start_off + skb->csum_offset;
+			/* Tx Partial Checksum Offload Enabled */
+			cur_p->app0 |= 1;
+			cur_p->app1 = (csum_start_off << 16) | csum_index_off;
+		}
+	} else if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+		cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */
+	}
+
+	cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK;
+	cur_p->phys = dma_map_single(ndev->dev.parent, skb->data,
+				     skb_headlen(skb), DMA_TO_DEVICE);
+
+	for (ii = 0; ii < num_frag; ii++) {
+		lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+		frag = &skb_shinfo(skb)->frags[ii];
+		cur_p->phys = dma_map_single(ndev->dev.parent,
+					     skb_frag_address(frag),
+					     skb_frag_size(frag),
+					     DMA_TO_DEVICE);
+		cur_p->cntrl = skb_frag_size(frag);
+	}
+
+	cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK;
+	cur_p->app4 = (unsigned long)skb;
+
+	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+	/* Start the transfer */
+	axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
+	lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * axienet_recv - Is called from Axi DMA Rx Isr to complete the received
+ *		  BD processing.
+ * @ndev:	Pointer to net_device structure.
+ *
+ * This function is invoked from the Axi DMA Rx isr to process the Rx BDs. It
+ * does minimal processing and invokes "netif_rx" to complete further
+ * processing.
+ */
+static void axienet_recv(struct net_device *ndev)
+{
+	u32 length;
+	u32 csumstatus;
+	u32 size = 0;
+	u32 packets = 0;
+	dma_addr_t tail_p;
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct sk_buff *skb, *new_skb;
+	struct axidma_bd *cur_p;
+
+	tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+	while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
+		skb = (struct sk_buff *) (cur_p->sw_id_offset);
+		length = cur_p->app4 & 0x0000FFFF;
+
+		dma_unmap_single(ndev->dev.parent, cur_p->phys,
+				 lp->max_frm_size,
+				 DMA_FROM_DEVICE);
+
+		skb_put(skb, length);
+		skb->protocol = eth_type_trans(skb, ndev);
+		/*skb_checksum_none_assert(skb);*/
+		skb->ip_summed = CHECKSUM_NONE;
+
+		/* if we're doing Rx csum offload, set it up */
+		if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
+			csumstatus = (cur_p->app2 &
+				      XAE_FULL_CSUM_STATUS_MASK) >> 3;
+			if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) ||
+			    (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+			}
+		} else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
+			   skb->protocol == __constant_htons(ETH_P_IP) &&
+			   skb->len > 64) {
+			skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
+			skb->ip_summed = CHECKSUM_COMPLETE;
+		}
+
+		netif_rx(skb);
+
+		size += length;
+		packets++;
+
+		new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
+		if (!new_skb) {
+			dev_err(&ndev->dev, "no memory for new sk_buff\n");
+			return;
+		}
+		cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
+					     lp->max_frm_size,
+					     DMA_FROM_DEVICE);
+		cur_p->cntrl = lp->max_frm_size;
+		cur_p->status = 0;
+		cur_p->sw_id_offset = (u32) new_skb;
+
+		lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM;
+		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+	}
+
+	ndev->stats.rx_packets += packets;
+	ndev->stats.rx_bytes += size;
+
+	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+}
+
+/**
+ * axienet_tx_irq - Tx Done Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done"
+ * to complete the BD processing.
+ */
+static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
+{
+	u32 cr;
+	unsigned int status;
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_start_xmit_done(lp->ndev);
+		goto out;
+	}
+	if (!(status & XAXIDMA_IRQ_ALL_MASK))
+		dev_err(&ndev->dev, "No interrupts asserted in Tx path");
+	if (status & XAXIDMA_IRQ_ERROR_MASK) {
+		dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status);
+		dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
+			(lp->tx_bd_v[lp->tx_bd_ci]).phys);
+
+		cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+		/* Disable coalesce, delay timer and error interrupts */
+		cr &= (~XAXIDMA_IRQ_ALL_MASK);
+		/* Write to the Tx channel control register */
+		axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+		cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+		/* Disable coalesce, delay timer and error interrupts */
+		cr &= (~XAXIDMA_IRQ_ALL_MASK);
+		/* Write to the Rx channel control register */
+		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+		tasklet_schedule(&lp->dma_err_tasklet);
+	}
+out:
+	axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
+	return IRQ_HANDLED;
+}
+
+/**
+ * axienet_rx_irq - Rx Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD
+ * processing.
+ */
+static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
+{
+	u32 cr;
+	unsigned int status;
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
+		axienet_recv(lp->ndev);
+		goto out;
+	}
+	if (!(status & XAXIDMA_IRQ_ALL_MASK))
+		dev_err(&ndev->dev, "No interrupts asserted in Rx path");
+	if (status & XAXIDMA_IRQ_ERROR_MASK) {
+		dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status);
+		dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
+			(lp->rx_bd_v[lp->rx_bd_ci]).phys);
+
+		cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+		/* Disable coalesce, delay timer and error interrupts */
+		cr &= (~XAXIDMA_IRQ_ALL_MASK);
+		/* Finally write to the Tx channel control register */
+		axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+		cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+		/* Disable coalesce, delay timer and error interrupts */
+		cr &= (~XAXIDMA_IRQ_ALL_MASK);
+		/* write to the Rx channel control register */
+		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+		tasklet_schedule(&lp->dma_err_tasklet);
+	}
+out:
+	axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
+	return IRQ_HANDLED;
+}
+
+/**
+ * axienet_open - Driver open routine.
+ * @ndev:	Pointer to net_device structure
+ *
+ * returns: 0, on success.
+ *	    -ENODEV, if PHY cannot be connected to
+ *	    non-zero error value on failure
+ *
+ * This is the driver open routine. It calls phy_start to start the PHY device.
+ * It also allocates interrupt service routines, enables the interrupt lines
+ * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer
+ * descriptors are initialized.
+ */
+static int axienet_open(struct net_device *ndev)
+{
+	int ret, mdio_mcreg;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "axienet_open()\n");
+
+	mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
+	 * When we do an Axi Ethernet reset, it resets the complete core
+	 * including the MDIO. If MDIO is not disabled when the reset
+	 * process is started, MDIO will be broken afterwards. */
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
+		    (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK)));
+	axienet_device_reset(ndev);
+	/* Enable the MDIO */
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg);
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+
+	if (lp->phy_node) {
+		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     axienet_adjust_link, 0,
+					     PHY_INTERFACE_MODE_GMII);
+		if (!lp->phy_dev) {
+			dev_err(lp->dev, "of_phy_connect() failed\n");
+			return -ENODEV;
+		}
+		phy_start(lp->phy_dev);
+	}
+
+	/* Enable interrupts for Axi DMA Tx */
+	ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev);
+	if (ret)
+		goto err_tx_irq;
+	/* Enable interrupts for Axi DMA Rx */
+	ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev);
+	if (ret)
+		goto err_rx_irq;
+	/* Enable tasklets for Axi DMA error handling */
+	tasklet_enable(&lp->dma_err_tasklet);
+	return 0;
+
+err_rx_irq:
+	free_irq(lp->tx_irq, ndev);
+err_tx_irq:
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+	dev_err(lp->dev, "request_irq() failed\n");
+	return ret;
+}
+
+/**
+ * axienet_stop - Driver stop routine.
+ * @ndev:	Pointer to net_device structure
+ *
+ * returns: 0, on success.
+ *
+ * This is the driver stop routine. It calls phy_disconnect to stop the PHY
+ * device. It also removes the interrupt handlers and disables the interrupts.
+ * The Axi DMA Tx/Rx BDs are released.
+ */
+static int axienet_stop(struct net_device *ndev)
+{
+	u32 cr;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "axienet_close()\n");
+
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
+			  cr & (~XAXIDMA_CR_RUNSTOP_MASK));
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
+			  cr & (~XAXIDMA_CR_RUNSTOP_MASK));
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+
+	tasklet_disable(&lp->dma_err_tasklet);
+
+	free_irq(lp->tx_irq, ndev);
+	free_irq(lp->rx_irq, ndev);
+
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+
+	axienet_dma_bd_release(ndev);
+	return 0;
+}
+
+/**
+ * axienet_change_mtu - Driver change mtu routine.
+ * @ndev:	Pointer to net_device structure
+ * @new_mtu:	New mtu value to be applied
+ *
+ * returns: Always returns 0 (success).
+ *
+ * This is the change mtu driver routine. It checks if the Axi Ethernet
+ * hardware supports jumbo frames before changing the mtu. This can be
+ * called only when the device is not up.
+ */
+static int axienet_change_mtu(struct net_device *ndev, int new_mtu)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (netif_running(ndev))
+		return -EBUSY;
+	if (lp->jumbo_support) {
+		if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64))
+			return -EINVAL;
+		ndev->mtu = new_mtu;
+	} else {
+		if ((new_mtu > XAE_MTU) || (new_mtu < 64))
+			return -EINVAL;
+		ndev->mtu = new_mtu;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * axienet_poll_controller - Axi Ethernet poll mechanism.
+ * @ndev:	Pointer to net_device structure
+ *
+ * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior
+ * to polling the ISRs and are enabled back after the polling is done.
+ */
+static void axienet_poll_controller(struct net_device *ndev)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+	disable_irq(lp->tx_irq);
+	disable_irq(lp->rx_irq);
+	axienet_rx_irq(lp->tx_irq, ndev);
+	axienet_tx_irq(lp->rx_irq, ndev);
+	enable_irq(lp->tx_irq);
+	enable_irq(lp->rx_irq);
+}
+#endif
+
+static const struct net_device_ops axienet_netdev_ops = {
+	.ndo_open = axienet_open,
+	.ndo_stop = axienet_stop,
+	.ndo_start_xmit = axienet_start_xmit,
+	.ndo_change_mtu	= axienet_change_mtu,
+	.ndo_set_mac_address = netdev_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_set_rx_mode = axienet_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = axienet_poll_controller,
+#endif
+};
+
+/**
+ * axienet_ethtools_get_settings - Get Axi Ethernet settings related to PHY.
+ * @ndev:	Pointer to net_device structure
+ * @ecmd:	Pointer to ethtool_cmd structure
+ *
+ * This implements ethtool command for getting PHY settings. If PHY could
+ * not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to get the PHY settings.
+ * Issue "ethtool ethX" under linux prompt to execute this function.
+ */
+static int axienet_ethtools_get_settings(struct net_device *ndev,
+					 struct ethtool_cmd *ecmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct phy_device *phydev = lp->phy_dev;
+	if (!phydev)
+		return -ENODEV;
+	return phy_ethtool_gset(phydev, ecmd);
+}
+
+/**
+ * axienet_ethtools_set_settings - Set PHY settings as passed in the argument.
+ * @ndev:	Pointer to net_device structure
+ * @ecmd:	Pointer to ethtool_cmd structure
+ *
+ * This implements ethtool command for setting various PHY settings. If PHY
+ * could not be found, the function returns -ENODEV. This function calls the
+ * relevant PHY ethtool API to set the PHY.
+ * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this
+ * function.
+ */
+static int axienet_ethtools_set_settings(struct net_device *ndev,
+					 struct ethtool_cmd *ecmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+	struct phy_device *phydev = lp->phy_dev;
+	if (!phydev)
+		return -ENODEV;
+	return phy_ethtool_sset(phydev, ecmd);
+}
+
+/**
+ * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information.
+ * @ndev:	Pointer to net_device structure
+ * @ed:		Pointer to ethtool_drvinfo structure
+ *
+ * This implements ethtool command for getting the driver information.
+ * Issue "ethtool -i ethX" under linux prompt to execute this function.
+ */
+static void axienet_ethtools_get_drvinfo(struct net_device *ndev,
+					 struct ethtool_drvinfo *ed)
+{
+	memset(ed, 0, sizeof(struct ethtool_drvinfo));
+	strcpy(ed->driver, DRIVER_NAME);
+	strcpy(ed->version, DRIVER_VERSION);
+	ed->regdump_len = sizeof(u32) * AXIENET_REGS_N;
+}
+
+/**
+ * axienet_ethtools_get_regs_len - Get the total regs length present in the
+ *				   AxiEthernet core.
+ * @ndev:	Pointer to net_device structure
+ *
+ * This implements ethtool command for getting the total register length
+ * information.
+ */
+static int axienet_ethtools_get_regs_len(struct net_device *ndev)
+{
+	return sizeof(u32) * AXIENET_REGS_N;
+}
+
+/**
+ * axienet_ethtools_get_regs - Dump the contents of all registers present
+ *			       in AxiEthernet core.
+ * @ndev:	Pointer to net_device structure
+ * @regs:	Pointer to ethtool_regs structure
+ * @ret:	Void pointer used to return the contents of the registers.
+ *
+ * This implements ethtool command for getting the Axi Ethernet register dump.
+ * Issue "ethtool -d ethX" to execute this function.
+ */
+static void axienet_ethtools_get_regs(struct net_device *ndev,
+				      struct ethtool_regs *regs, void *ret)
+{
+	u32 *data = (u32 *) ret;
+	size_t len = sizeof(u32) * AXIENET_REGS_N;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	regs->version = 0;
+	regs->len = len;
+
+	memset(data, 0, len);
+	data[0] = axienet_ior(lp, XAE_RAF_OFFSET);
+	data[1] = axienet_ior(lp, XAE_TPF_OFFSET);
+	data[2] = axienet_ior(lp, XAE_IFGP_OFFSET);
+	data[3] = axienet_ior(lp, XAE_IS_OFFSET);
+	data[4] = axienet_ior(lp, XAE_IP_OFFSET);
+	data[5] = axienet_ior(lp, XAE_IE_OFFSET);
+	data[6] = axienet_ior(lp, XAE_TTAG_OFFSET);
+	data[7] = axienet_ior(lp, XAE_RTAG_OFFSET);
+	data[8] = axienet_ior(lp, XAE_UAWL_OFFSET);
+	data[9] = axienet_ior(lp, XAE_UAWU_OFFSET);
+	data[10] = axienet_ior(lp, XAE_TPID0_OFFSET);
+	data[11] = axienet_ior(lp, XAE_TPID1_OFFSET);
+	data[12] = axienet_ior(lp, XAE_PPST_OFFSET);
+	data[13] = axienet_ior(lp, XAE_RCW0_OFFSET);
+	data[14] = axienet_ior(lp, XAE_RCW1_OFFSET);
+	data[15] = axienet_ior(lp, XAE_TC_OFFSET);
+	data[16] = axienet_ior(lp, XAE_FCC_OFFSET);
+	data[17] = axienet_ior(lp, XAE_EMMC_OFFSET);
+	data[18] = axienet_ior(lp, XAE_PHYC_OFFSET);
+	data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
+	data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET);
+	data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET);
+	data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET);
+	data[23] = axienet_ior(lp, XAE_MDIO_MIS_OFFSET);
+	data[24] = axienet_ior(lp, XAE_MDIO_MIP_OFFSET);
+	data[25] = axienet_ior(lp, XAE_MDIO_MIE_OFFSET);
+	data[26] = axienet_ior(lp, XAE_MDIO_MIC_OFFSET);
+	data[27] = axienet_ior(lp, XAE_UAW0_OFFSET);
+	data[28] = axienet_ior(lp, XAE_UAW1_OFFSET);
+	data[29] = axienet_ior(lp, XAE_FMI_OFFSET);
+	data[30] = axienet_ior(lp, XAE_AF0_OFFSET);
+	data[31] = axienet_ior(lp, XAE_AF1_OFFSET);
+}
+
+/**
+ * axienet_ethtools_get_pauseparam - Get the pause parameter setting for
+ *				     Tx and Rx paths.
+ * @ndev:	Pointer to net_device structure
+ * @epauseparm:	Pointer to ethtool_pauseparam structure.
+ *
+ * This implements ethtool command for getting axi ethernet pause frame
+ * setting. Issue "ethtool -a ethX" to execute this function.
+ */
+static void
+axienet_ethtools_get_pauseparam(struct net_device *ndev,
+				struct ethtool_pauseparam *epauseparm)
+{
+	u32 regval;
+	struct axienet_local *lp = netdev_priv(ndev);
+	epauseparm->autoneg  = 0;
+	regval = axienet_ior(lp, XAE_FCC_OFFSET);
+	epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK;
+	epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK;
+}
+
+/**
+ * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control)
+ *				     settings.
+ * @ndev:	Pointer to net_device structure
+ * @epauseparam:Pointer to ethtool_pauseparam structure
+ *
+ * This implements ethtool command for enabling flow control on Rx and Tx
+ * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this
+ * function.
+ */
+static int
+axienet_ethtools_set_pauseparam(struct net_device *ndev,
+				struct ethtool_pauseparam *epauseparm)
+{
+	u32 regval = 0;
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		printk(KERN_ERR	"%s: Please stop netif before applying "
+		       "configruation\n", ndev->name);
+		return -EFAULT;
+	}
+
+	regval = axienet_ior(lp, XAE_FCC_OFFSET);
+	if (epauseparm->tx_pause)
+		regval |= XAE_FCC_FCTX_MASK;
+	else
+		regval &= ~XAE_FCC_FCTX_MASK;
+	if (epauseparm->rx_pause)
+		regval |= XAE_FCC_FCRX_MASK;
+	else
+		regval &= ~XAE_FCC_FCRX_MASK;
+	axienet_iow(lp, XAE_FCC_OFFSET, regval);
+
+	return 0;
+}
+
+/**
+ * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count.
+ * @ndev:	Pointer to net_device structure
+ * @ecoalesce:	Pointer to ethtool_coalesce structure
+ *
+ * This implements ethtool command for getting the DMA interrupt coalescing
+ * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to
+ * execute this function.
+ */
+static int axienet_ethtools_get_coalesce(struct net_device *ndev,
+					 struct ethtool_coalesce *ecoalesce)
+{
+	u32 regval = 0;
+	struct axienet_local *lp = netdev_priv(ndev);
+	regval = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK)
+					     >> XAXIDMA_COALESCE_SHIFT;
+	regval = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK)
+					     >> XAXIDMA_COALESCE_SHIFT;
+	return 0;
+}
+
+/**
+ * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count.
+ * @ndev:	Pointer to net_device structure
+ * @ecoalesce:	Pointer to ethtool_coalesce structure
+ *
+ * This implements ethtool command for setting the DMA interrupt coalescing
+ * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux
+ * prompt to execute this function.
+ */
+static int axienet_ethtools_set_coalesce(struct net_device *ndev,
+					 struct ethtool_coalesce *ecoalesce)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		printk(KERN_ERR	"%s: Please stop netif before applying "
+		       "configruation\n", ndev->name);
+		return -EFAULT;
+	}
+
+	if ((ecoalesce->rx_coalesce_usecs) ||
+	    (ecoalesce->rx_coalesce_usecs_irq) ||
+	    (ecoalesce->rx_max_coalesced_frames_irq) ||
+	    (ecoalesce->tx_coalesce_usecs) ||
+	    (ecoalesce->tx_coalesce_usecs_irq) ||
+	    (ecoalesce->tx_max_coalesced_frames_irq) ||
+	    (ecoalesce->stats_block_coalesce_usecs) ||
+	    (ecoalesce->use_adaptive_rx_coalesce) ||
+	    (ecoalesce->use_adaptive_tx_coalesce) ||
+	    (ecoalesce->pkt_rate_low) ||
+	    (ecoalesce->rx_coalesce_usecs_low) ||
+	    (ecoalesce->rx_max_coalesced_frames_low) ||
+	    (ecoalesce->tx_coalesce_usecs_low) ||
+	    (ecoalesce->tx_max_coalesced_frames_low) ||
+	    (ecoalesce->pkt_rate_high) ||
+	    (ecoalesce->rx_coalesce_usecs_high) ||
+	    (ecoalesce->rx_max_coalesced_frames_high) ||
+	    (ecoalesce->tx_coalesce_usecs_high) ||
+	    (ecoalesce->tx_max_coalesced_frames_high) ||
+	    (ecoalesce->rate_sample_interval))
+		return -EOPNOTSUPP;
+	if (ecoalesce->rx_max_coalesced_frames)
+		lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
+	if (ecoalesce->tx_max_coalesced_frames)
+		lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames;
+
+	return 0;
+}
+
+static struct ethtool_ops axienet_ethtool_ops = {
+	.get_settings   = axienet_ethtools_get_settings,
+	.set_settings   = axienet_ethtools_set_settings,
+	.get_drvinfo    = axienet_ethtools_get_drvinfo,
+	.get_regs_len   = axienet_ethtools_get_regs_len,
+	.get_regs       = axienet_ethtools_get_regs,
+	.get_link       = ethtool_op_get_link,
+	.get_pauseparam = axienet_ethtools_get_pauseparam,
+	.set_pauseparam = axienet_ethtools_set_pauseparam,
+	.get_coalesce   = axienet_ethtools_get_coalesce,
+	.set_coalesce   = axienet_ethtools_set_coalesce,
+};
+
+/**
+ * axienet_dma_err_handler - Tasklet handler for Axi DMA Error
+ * @data:	Data passed
+ *
+ * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the
+ * Tx/Rx BDs.
+ */
+static void axienet_dma_err_handler(unsigned long data)
+{
+	u32 axienet_status;
+	u32 cr, i;
+	int mdio_mcreg;
+	struct axienet_local *lp = (struct axienet_local *) data;
+	struct net_device *ndev = lp->ndev;
+	struct axidma_bd *cur_p;
+
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+	mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
+	axienet_mdio_wait_until_ready(lp);
+	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
+	 * When we do an Axi Ethernet reset, it resets the complete core
+	 * including the MDIO. So if MDIO is not disabled when the reset
+	 * process is started, MDIO will be broken afterwards. */
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg &
+		    ~XAE_MDIO_MC_MDIOEN_MASK));
+
+	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET);
+	__axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET);
+
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg);
+	axienet_mdio_wait_until_ready(lp);
+
+	for (i = 0; i < TX_BD_NUM; i++) {
+		cur_p = &lp->tx_bd_v[i];
+		if (cur_p->phys)
+			dma_unmap_single(ndev->dev.parent, cur_p->phys,
+					 (cur_p->cntrl &
+					  XAXIDMA_BD_CTRL_LENGTH_MASK),
+					 DMA_TO_DEVICE);
+		if (cur_p->app4)
+			dev_kfree_skb_irq((struct sk_buff *) cur_p->app4);
+		cur_p->phys = 0;
+		cur_p->cntrl = 0;
+		cur_p->status = 0;
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app3 = 0;
+		cur_p->app4 = 0;
+		cur_p->sw_id_offset = 0;
+	}
+
+	for (i = 0; i < RX_BD_NUM; i++) {
+		cur_p = &lp->rx_bd_v[i];
+		cur_p->status = 0;
+		cur_p->app0 = 0;
+		cur_p->app1 = 0;
+		cur_p->app2 = 0;
+		cur_p->app3 = 0;
+		cur_p->app4 = 0;
+	}
+
+	lp->tx_bd_ci = 0;
+	lp->tx_bd_tail = 0;
+	lp->rx_bd_ci = 0;
+
+	/* Start updating the Rx channel control register */
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	/* Update the interrupt coalesce count */
+	cr = ((cr & ~XAXIDMA_COALESCE_MASK) |
+	      (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT));
+	/* Update the delay timer count */
+	cr = ((cr & ~XAXIDMA_DELAY_MASK) |
+	      (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
+	/* Enable coalesce, delay timer and error interrupts */
+	cr |= XAXIDMA_IRQ_ALL_MASK;
+	/* Finally write to the Rx channel control register */
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+	/* Start updating the Tx channel control register */
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	/* Update the interrupt coalesce count */
+	cr = (((cr & ~XAXIDMA_COALESCE_MASK)) |
+	      (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT));
+	/* Update the delay timer count */
+	cr = (((cr & ~XAXIDMA_DELAY_MASK)) |
+	      (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
+	/* Enable coalesce, delay timer and error interrupts */
+	cr |= XAXIDMA_IRQ_ALL_MASK;
+	/* Finally write to the Tx channel control register */
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+	/* Populate the tail pointer and bring the Rx Axi DMA engine out of
+	 * halted state. This will make the Rx side ready for reception.*/
+	axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
+			  cr | XAXIDMA_CR_RUNSTOP_MASK);
+	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+			  (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+
+	/* Write to the RS (Run-stop) bit in the Tx channel control register.
+	 * Tx channel is now ready to run. But only after we write to the
+	 * tail pointer register that the Tx channel will start transmitting */
+	axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
+			  cr | XAXIDMA_CR_RUNSTOP_MASK);
+
+	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
+	axienet_status &= ~XAE_RCW1_RX_MASK;
+	axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status);
+
+	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
+	if (axienet_status & XAE_INT_RXRJECT_MASK)
+		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
+
+	/* Sync default options with HW but leave receiver and
+	 * transmitter disabled.*/
+	axienet_setoptions(ndev, lp->options &
+			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
+	axienet_set_mac_address(ndev, NULL);
+	axienet_set_multicast_list(ndev);
+	axienet_setoptions(ndev, lp->options);
+}
+
+/**
+ * axienet_of_probe - Axi Ethernet probe function.
+ * @op:		Pointer to platform device structure.
+ * @match:	Pointer to device id structure
+ *
+ * returns: 0, on success
+ *	    Non-zero error value on failure.
+ *
+ * This is the probe routine for Axi Ethernet driver. This is called before
+ * any other driver routines are invoked. It allocates and sets up the Ethernet
+ * device. Parses through device tree and populates fields of
+ * axienet_local. It registers the Ethernet device.
+ */
+static int __devinit axienet_of_probe(struct platform_device *op)
+{
+	__be32 *p;
+	int size, ret = 0;
+	struct device_node *np;
+	struct axienet_local *lp;
+	struct net_device *ndev;
+	const void *addr;
+
+	ndev = alloc_etherdev(sizeof(*lp));
+	if (!ndev) {
+		dev_err(&op->dev, "could not allocate device.\n");
+		return -ENOMEM;
+	}
+
+	ether_setup(ndev);
+	dev_set_drvdata(&op->dev, ndev);
+
+	SET_NETDEV_DEV(ndev, &op->dev);
+	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
+	ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+	ndev->netdev_ops = &axienet_netdev_ops;
+	ndev->ethtool_ops = &axienet_ethtool_ops;
+
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+	lp->dev = &op->dev;
+	lp->options = XAE_OPTION_DEFAULTS;
+	/* Map device registers */
+	lp->regs = of_iomap(op->dev.of_node, 0);
+	if (!lp->regs) {
+		dev_err(&op->dev, "could not map Axi Ethernet regs.\n");
+		goto nodev;
+	}
+	/* Setup checksum offload, but default to off if not specified */
+	lp->features = 0;
+
+	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
+	if (p) {
+		switch (be32_to_cpup(p)) {
+		case 1:
+			lp->csum_offload_on_tx_path =
+				XAE_FEATURE_PARTIAL_TX_CSUM;
+			lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM;
+			/* Can checksum TCP/UDP over IPv4. */
+			ndev->features |= NETIF_F_IP_CSUM;
+			break;
+		case 2:
+			lp->csum_offload_on_tx_path =
+				XAE_FEATURE_FULL_TX_CSUM;
+			lp->features |= XAE_FEATURE_FULL_TX_CSUM;
+			/* Can checksum TCP/UDP over IPv4. */
+			ndev->features |= NETIF_F_IP_CSUM;
+			break;
+		default:
+			lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD;
+		}
+	}
+	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
+	if (p) {
+		switch (be32_to_cpup(p)) {
+		case 1:
+			lp->csum_offload_on_rx_path =
+				XAE_FEATURE_PARTIAL_RX_CSUM;
+			lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM;
+			break;
+		case 2:
+			lp->csum_offload_on_rx_path =
+				XAE_FEATURE_FULL_RX_CSUM;
+			lp->features |= XAE_FEATURE_FULL_RX_CSUM;
+			break;
+		default:
+			lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD;
+		}
+	}
+	/* For supporting jumbo frames, the Axi Ethernet hardware must have
+	 * a larger Rx/Tx Memory. Typically, the size must be more than or
+	 * equal to 16384 bytes, so that we can enable jumbo option and start
+	 * supporting jumbo frames. Here we check for memory allocated for
+	 * Rx/Tx in the hardware from the device-tree and accordingly set
+	 * flags. */
+	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL);
+	if (p) {
+		if ((be32_to_cpup(p)) >= 0x4000)
+			lp->jumbo_support = 1;
+	}
+	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
+				       NULL);
+	if (p)
+		lp->temac_type = be32_to_cpup(p);
+	p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL);
+	if (p)
+		lp->phy_type = be32_to_cpup(p);
+
+	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+	np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0);
+	if (!np) {
+		dev_err(&op->dev, "could not find DMA node\n");
+		goto err_iounmap;
+	}
+	lp->dma_regs = of_iomap(np, 0);
+	if (lp->dma_regs) {
+		dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs);
+	} else {
+		dev_err(&op->dev, "unable to map DMA registers\n");
+		of_node_put(np);
+	}
+	lp->rx_irq = irq_of_parse_and_map(np, 1);
+	lp->tx_irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
+		dev_err(&op->dev, "could not determine irqs\n");
+		ret = -ENOMEM;
+		goto err_iounmap_2;
+	}
+
+	/* Retrieve the MAC address */
+	addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
+	if ((!addr) || (size != 6)) {
+		dev_err(&op->dev, "could not find MAC address\n");
+		ret = -ENODEV;
+		goto err_iounmap_2;
+	}
+	axienet_set_mac_address(ndev, (void *) addr);
+
+	lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
+	lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
+
+	lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
+	ret = axienet_mdio_setup(lp, op->dev.of_node);
+	if (ret)
+		dev_warn(&op->dev, "error registering MDIO bus\n");
+
+	ret = register_netdev(lp->ndev);
+	if (ret) {
+		dev_err(lp->dev, "register_netdev() error (%i)\n", ret);
+		goto err_iounmap_2;
+	}
+
+	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
+		     (unsigned long) lp);
+	tasklet_disable(&lp->dma_err_tasklet);
+
+	return 0;
+
+err_iounmap_2:
+	if (lp->dma_regs)
+		iounmap(lp->dma_regs);
+err_iounmap:
+	iounmap(lp->regs);
+nodev:
+	free_netdev(ndev);
+	ndev = NULL;
+	return ret;
+}
+
+static int __devexit axienet_of_remove(struct platform_device *op)
+{
+	struct net_device *ndev = dev_get_drvdata(&op->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	axienet_mdio_teardown(lp);
+	unregister_netdev(ndev);
+
+	if (lp->phy_node)
+		of_node_put(lp->phy_node);
+	lp->phy_node = NULL;
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	iounmap(lp->regs);
+	if (lp->dma_regs)
+		iounmap(lp->dma_regs);
+	free_netdev(ndev);
+
+	return 0;
+}
+
+static struct platform_driver axienet_of_driver = {
+	.probe = axienet_of_probe,
+	.remove = __devexit_p(axienet_of_remove),
+	.driver = {
+		 .owner = THIS_MODULE,
+		 .name = "xilinx_axienet",
+		 .of_match_table = axienet_of_match,
+	},
+};
+
+static int __init axienet_init(void)
+{
+	return platform_driver_register(&axienet_of_driver);
+}
+
+static void __exit axienet_exit(void)
+{
+	platform_driver_unregister(&axienet_of_driver);
+}
+
+module_init(axienet_init);
+module_exit(axienet_exit);
+
+MODULE_DESCRIPTION("Xilinx Axi Ethernet driver");
+MODULE_AUTHOR("Xilinx");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
new file mode 100644
index 0000000..d70b6e7
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -0,0 +1,238 @@
+/*
+ * MDIO bus driver for the Xilinx Axi Ethernet device
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ * Copyright (c) 2010 Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch>
+ * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch>
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/jiffies.h>
+
+#include "xilinx_axienet.h"
+
+#define MAX_MDIO_FREQ		2500000 /* 2.5 MHz */
+#define DEFAULT_CLOCK_DIVISOR	XAE_MDIO_DIV_DFT
+
+/* Wait till MDIO interface is ready to accept a new transaction.*/
+int axienet_mdio_wait_until_ready(struct axienet_local *lp)
+{
+	long end = jiffies + 2;
+	while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) &
+		 XAE_MDIO_MCR_READY_MASK)) {
+		if (end - jiffies <= 0) {
+			WARN_ON(1);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+	return 0;
+}
+
+/**
+ * axienet_mdio_read - MDIO interface read function
+ * @bus:	Pointer to mii bus structure
+ * @phy_id:	Address of the PHY device
+ * @reg:	PHY register to read
+ *
+ * returns:	The register contents on success, -ETIMEDOUT on a timeout
+ *
+ * Reads the contents of the requested register from the requested PHY
+ * address by first writing the details into MCR register. After a while
+ * the register MRD is read to obtain the PHY register content.
+ */
+static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	u32 rc;
+	int ret;
+	struct axienet_local *lp = bus->priv;
+
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+
+	axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
+		    (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
+		      XAE_MDIO_MCR_PHYAD_MASK) |
+		     ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
+		      XAE_MDIO_MCR_REGAD_MASK) |
+		     XAE_MDIO_MCR_INITIATE_MASK |
+		     XAE_MDIO_MCR_OP_READ_MASK));
+
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+
+	rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;
+
+	dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+/**
+ * axienet_mdio_write - MDIO interface write function
+ * @bus:	Pointer to mii bus structure
+ * @phy_id:	Address of the PHY device
+ * @reg:	PHY register to write to
+ * @val:	Value to be written into the register
+ *
+ * returns:	0 on success, -ETIMEDOUT on a timeout
+ *
+ * Writes the value to the requested register by first writing the value
+ * into MWD register. The the MCR register is then appropriately setup
+ * to finish the write operation.
+ */
+static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+			      u16 val)
+{
+	int ret;
+	struct axienet_local *lp = bus->priv;
+
+	dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+
+	axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val);
+	axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
+		    (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
+		      XAE_MDIO_MCR_PHYAD_MASK) |
+		     ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
+		      XAE_MDIO_MCR_REGAD_MASK) |
+		     XAE_MDIO_MCR_INITIATE_MASK |
+		     XAE_MDIO_MCR_OP_WRITE_MASK));
+
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+/**
+ * axienet_mdio_setup - MDIO setup function
+ * @lp:		Pointer to axienet local data structure.
+ * @np:		Pointer to device node
+ *
+ * returns:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
+ *		mdiobus_alloc (to allocate memory for mii bus structure) fails.
+ *
+ * Sets up the MDIO interface by initializing the MDIO clock and enabling the
+ * MDIO interface in hardware. Register the MDIO interface.
+ **/
+int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
+{
+	int ret;
+	u32 clk_div, host_clock;
+	u32 *property_p;
+	struct mii_bus *bus;
+	struct resource res;
+	struct device_node *np1;
+
+	/* clk_div can be calculated by deriving it from the equation:
+	 * fMDIO = fHOST / ((1 + clk_div) * 2)
+	 *
+	 * Where fMDIO <= 2500000, so we get:
+	 * fHOST / ((1 + clk_div) * 2) <= 2500000
+	 *
+	 * Then we get:
+	 * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST)
+	 *
+	 * Then we get:
+	 * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST)
+	 *
+	 * Then we get:
+	 * 1 / (1 + clk_div) <= (5000000 / fHOST)
+	 *
+	 * So:
+	 * (1 + clk_div) >= (fHOST / 5000000)
+	 *
+	 * And finally:
+	 * clk_div >= (fHOST / 5000000) - 1
+	 *
+	 * fHOST can be read from the flattened device tree as property
+	 * "clock-frequency" from the CPU
+	 */
+
+	np1 = of_find_node_by_name(NULL, "cpu");
+	if (!np1) {
+		printk(KERN_WARNING "%s(): Could not find CPU device node.",
+		       __func__);
+		printk(KERN_WARNING "Setting MDIO clock divisor to "
+		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		clk_div = DEFAULT_CLOCK_DIVISOR;
+		goto issue;
+	}
+	property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL);
+	if (!property_p) {
+		printk(KERN_WARNING "%s(): Could not find CPU property: "
+		       "clock-frequency.", __func__);
+		printk(KERN_WARNING "Setting MDIO clock divisor to "
+		       "default %d\n", DEFAULT_CLOCK_DIVISOR);
+		clk_div = DEFAULT_CLOCK_DIVISOR;
+		goto issue;
+	}
+
+	host_clock = be32_to_cpup(property_p);
+	clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
+	/* If there is any remainder from the division of
+	 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
+	 * 1 to the clock divisor or we will surely be above 2.5 MHz */
+	if (host_clock % (MAX_MDIO_FREQ * 2))
+		clk_div++;
+
+	printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based "
+	       "on %u Hz host clock.\n", __func__, clk_div, host_clock);
+
+	of_node_put(np1);
+issue:
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
+		    (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK));
+
+	ret = axienet_mdio_wait_until_ready(lp);
+	if (ret < 0)
+		return ret;
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	np1 = of_get_parent(lp->phy_node);
+	of_address_to_resource(np1, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long) res.start);
+
+	bus->priv = lp;
+	bus->name = "Xilinx Axi Ethernet MDIO";
+	bus->read = axienet_mdio_read;
+	bus->write = axienet_mdio_write;
+	bus->parent = lp->dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+	lp->mii_bus = bus;
+
+	ret = of_mdiobus_register(bus, np1);
+	if (ret) {
+		mdiobus_free(bus);
+		return ret;
+	}
+	return 0;
+}
+
+/**
+ * axienet_mdio_teardown - MDIO remove function
+ * @lp:		Pointer to axienet local data structure.
+ *
+ * Unregisters the MDIO and frees any associate memory for mii bus.
+ */
+void axienet_mdio_teardown(struct axienet_local *lp)
+{
+	mdiobus_unregister(lp->mii_bus);
+	kfree(lp->mii_bus->irq);
+	mdiobus_free(lp->mii_bus);
+	lp->mii_bus = NULL;
+}