summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohannes Thumshirn <johannes.thumshirn@men.de>2014-12-16 10:09:20 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-01-09 15:46:37 -0800
commit7b7c54914f73966976893747ee8e2ca58166a627 (patch)
tree867344f8e283b38127c957f0ee4b3247f7e54687
parent7e4a90cb2efecb3799bde9280efbf7f4af8f891b (diff)
downloadop-kernel-dev-7b7c54914f73966976893747ee8e2ca58166a627.zip
op-kernel-dev-7b7c54914f73966976893747ee8e2ca58166a627.tar.gz
mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
Currently it is not possible to have a kernel with built-in MCB attached devices. This results out of the fact that mcb-pci requests PCI BAR 0, then parses the chameleon table and calls the driver's probe function before releasing BAR 0 again. When building the kernel with modules this is not a problem (and therefore it wasn't detected by my tests yet). A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device. 0x200 bytes is the maximum size of a Chameleon v2 Table. Also this patch stops disabling the PCI device on successful registration of MCB devices. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/mcb/mcb-internal.h1
-rw-r--r--drivers/mcb/mcb-pci.c27
2 files changed, 19 insertions, 9 deletions
diff --git a/drivers/mcb/mcb-internal.h b/drivers/mcb/mcb-internal.h
index f956ef2..fb7493d 100644
--- a/drivers/mcb/mcb-internal.h
+++ b/drivers/mcb/mcb-internal.h
@@ -7,6 +7,7 @@
#define PCI_DEVICE_ID_MEN_CHAMELEON 0x4d45
#define CHAMELEON_FILENAME_LEN 12
#define CHAMELEONV2_MAGIC 0xabce
+#define CHAM_HEADER_SIZE 0x200
enum chameleon_descriptor_type {
CHAMELEON_DTYPE_GENERAL = 0x0,
diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
index b591819..5e1bd5d 100644
--- a/drivers/mcb/mcb-pci.c
+++ b/drivers/mcb/mcb-pci.c
@@ -17,6 +17,7 @@
struct priv {
struct mcb_bus *bus;
+ phys_addr_t mapbase;
void __iomem *base;
};
@@ -31,8 +32,8 @@ static int mcb_pci_get_irq(struct mcb_device *mdev)
static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct resource *res;
struct priv *priv;
- phys_addr_t mapbase;
int ret;
int num_cells;
unsigned long flags;
@@ -47,19 +48,21 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- mapbase = pci_resource_start(pdev, 0);
- if (!mapbase) {
+ priv->mapbase = pci_resource_start(pdev, 0);
+ if (!priv->mapbase) {
dev_err(&pdev->dev, "No PCI resource\n");
goto err_start;
}
- ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
- if (ret) {
- dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+ res = request_mem_region(priv->mapbase, CHAM_HEADER_SIZE,
+ KBUILD_MODNAME);
+ if (IS_ERR(res)) {
+ dev_err(&pdev->dev, "Failed to request PCI memory\n");
+ ret = PTR_ERR(res);
goto err_start;
}
- priv->base = pci_iomap(pdev, 0, 0);
+ priv->base = ioremap(priv->mapbase, CHAM_HEADER_SIZE);
if (!priv->base) {
dev_err(&pdev->dev, "Cannot ioremap\n");
ret = -ENOMEM;
@@ -84,7 +87,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
priv->bus->get_irq = mcb_pci_get_irq;
- ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+ ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
if (ret < 0)
goto err_drvdata;
num_cells = ret;
@@ -93,8 +96,10 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mcb_bus_add_devices(priv->bus);
+ return 0;
+
err_drvdata:
- pci_iounmap(pdev, priv->base);
+ iounmap(priv->base);
err_ioremap:
pci_release_region(pdev, 0);
err_start:
@@ -107,6 +112,10 @@ static void mcb_pci_remove(struct pci_dev *pdev)
struct priv *priv = pci_get_drvdata(pdev);
mcb_release_bus(priv->bus);
+
+ iounmap(priv->base);
+ release_region(priv->mapbase, CHAM_HEADER_SIZE);
+ pci_disable_device(pdev);
}
static const struct pci_device_id mcb_pci_tbl[] = {
OpenPOWER on IntegriCloud