scsi: target: tcmu: add read length support

Generally target core and TCMUser seem to work fine for tape devices and
media changers.  But there is at least one situation where TCMUser is not
able to support sequential access device emulation correctly.

The situation is when an initiator sends a SCSI READ CDB with a length that
is greater than the length of the tape block to read. We can distinguish
two subcases:

A) The initiator sent the READ CDB with the SILI bit being set.

   In this case the sequential access device has to transfer the data from
   the tape block (only the length of the tape block) and transmit a good
   status.  The current interface between TCMUser and the userspace does
   not support reduction of the read data size by the userspace program.

   The patch below fixes this subcase by allowing the userspace program to
   specify a reduced data size in read direction.

B) The initiator sent the READ CDB with the SILI bit not being set.

   In this case the sequential access device has to transfer the data from
   the tape block as in A), but additionally has to transmit CHECK
   CONDITION with the ILI bit set and NO SENSE in the sensebytes. The
   information field in the sensebytes must contain the residual count.

   With the below patch a user space program can specify the real read data
   length and appropriate sensebytes.  TCMUser then uses the se_cmd flag
   SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data
   size and the sensebytes.  Note: the flag SCF_TREAT_READ_AS_NORMAL is
   introduced by Lee Duncan's patch "[PATCH v4] target: transport should
   handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700.

Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2 files changed, 39 insertions, 9 deletions

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 7f96dfa..d8dc3d2 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev,
 }
 
 static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
-			     bool bidi)
+			     bool bidi, uint32_t read_len)
 {
 	struct se_cmd *se_cmd = cmd->se_cmd;
 	int i, dbi;
@@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
 	for_each_sg(data_sg, sg, data_nents, i) {
 		int sg_remaining = sg->length;
 		to = kmap_atomic(sg_page(sg)) + sg->offset;
-		while (sg_remaining > 0) {
+		while (sg_remaining > 0 && read_len > 0) {
 			if (block_remaining == 0) {
 				if (from)
 					kunmap_atomic(from);
@@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
 			}
 			copy_bytes = min_t(size_t, sg_remaining,
 					block_remaining);
+			if (read_len < copy_bytes)
+				copy_bytes = read_len;
 			offset = DATA_BLOCK_SIZE - block_remaining;
 			tcmu_flush_dcache_range(from, copy_bytes);
 			memcpy(to + sg->length - sg_remaining, from + offset,
@@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
 
 			sg_remaining -= copy_bytes;
 			block_remaining -= copy_bytes;
+			read_len -= copy_bytes;
 		}
 		kunmap_atomic(to - sg->offset);
+		if (read_len == 0)
+			break;
 	}
 	if (from)
 		kunmap_atomic(from);
@@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 {
 	struct se_cmd *se_cmd = cmd->se_cmd;
 	struct tcmu_dev *udev = cmd->tcmu_dev;
+	bool read_len_valid = false;
+	uint32_t read_len = se_cmd->data_length;
 
 	/*
 	 * cmd has been completed already from timeout, just reclaim
@@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 		pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n",
 			cmd->se_cmd);
 		entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION;
-	} else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
+		goto done;
+	}
+
+	if (se_cmd->data_direction == DMA_FROM_DEVICE &&
+	    (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) {
+		read_len_valid = true;
+		if (entry->rsp.read_len < read_len)
+			read_len = entry->rsp.read_len;
+	}
+
+	if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
 		transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer);
-	} else if (se_cmd->se_cmd_flags & SCF_BIDI) {
+		if (!read_len_valid )
+			goto done;
+		else
+			se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL;
+	}
+	if (se_cmd->se_cmd_flags & SCF_BIDI) {
 		/* Get Data-In buffer before clean up */
-		gather_data_area(udev, cmd, true);
+		gather_data_area(udev, cmd, true, read_len);
 	} else if (se_cmd->data_direction == DMA_FROM_DEVICE) {
-		gather_data_area(udev, cmd, false);
+		gather_data_area(udev, cmd, false, read_len);
 	} else if (se_cmd->data_direction == DMA_TO_DEVICE) {
 		/* TODO: */
 	} else if (se_cmd->data_direction != DMA_NONE) {
@@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 			se_cmd->data_direction);
 	}
 
-	target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
+done:
+	if (read_len_valid) {
+		pr_debug("read_len = %d\n", read_len);
+		target_complete_cmd_with_length(cmd->se_cmd,
+					entry->rsp.scsi_status, read_len);
+	} else
+		target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
 
 out:
 	cmd->se_cmd = NULL;
@@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev)
 	/* Initialise the mailbox of the ring buffer */
 	mb = udev->mb_addr;
 	mb->version = TCMU_MAILBOX_VERSION;
-	mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC;
+	mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN;
 	mb->cmdr_off = CMDR_OFF;
 	mb->cmdr_size = udev->cmdr_size;
 
diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h
index 6e29934..b7b5796 100644
--- a/include/uapi/linux/target_core_user.h
+++ b/include/uapi/linux/target_core_user.h
@@ -44,6 +44,7 @@
 #define TCMU_MAILBOX_VERSION 2
 #define ALIGN_SIZE 64 /* Should be enough for most CPUs */
 #define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */
+#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */
 
 struct tcmu_mailbox {
 	__u16 version;
@@ -71,6 +72,7 @@ struct tcmu_cmd_entry_hdr {
 	__u16 cmd_id;
 	__u8 kflags;
 #define TCMU_UFLAG_UNKNOWN_OP 0x1
+#define TCMU_UFLAG_READ_LEN   0x2
 	__u8 uflags;
 
 } __packed;
@@ -119,7 +121,7 @@ struct tcmu_cmd_entry {
 			__u8 scsi_status;
 			__u8 __pad1;
 			__u16 __pad2;
-			__u32 __pad3;
+			__u32 read_len;
 			char sense_buffer[TCMU_SENSE_BUFFERSIZE];
 		} rsp;
 	};