diff options
author | Sven Eckelmann <sven.eckelmann@open-mesh.com> | 2016-06-02 17:59:50 +0300 |
---|---|---|
committer | Kalle Valo <kvalo@qca.qualcomm.com> | 2016-06-07 14:28:35 +0300 |
commit | 6847f967339179b72eab690d46bc6e88ff847844 (patch) | |
tree | 971c6cb09ddb84755445b43f1278b281dd975e13 | |
parent | 6fd3dd7160918f528b0d6b7084d18b31cd5fced5 (diff) | |
download | op-kernel-dev-6847f967339179b72eab690d46bc6e88ff847844.zip op-kernel-dev-6847f967339179b72eab690d46bc6e88ff847844.tar.gz |
ath10k: add board data download from target
The QCA9887 stores its calibration data (board.bin) inside the EEPROM of
the target. This has to be downloaded manually to allow the device to
initialize correctly.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
[kvalo@qca.qualcomm.com: handle -EOPNOTSUPP and s/fetch_board_data/fetch_cal_eeprom]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 42 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/core.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/hif.h | 14 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/hw.h | 22 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/pci.c | 139 |
5 files changed, 219 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index ed4e52e..1e88251 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/firmware.h> #include <linux/of.h> +#include <asm/byteorder.h> #include "core.h" #include "mac.h" @@ -573,6 +574,35 @@ out: return ret; } +static int ath10k_download_cal_eeprom(struct ath10k *ar) +{ + size_t data_len; + void *data = NULL; + int ret; + + ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len); + if (ret) { + if (ret != -EOPNOTSUPP) + ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n", + ret); + goto out_free; + } + + ret = ath10k_download_board_data(ar, data, data_len); + if (ret) { + ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n", + ret); + goto out_free; + } + + ret = 0; + +out_free: + kfree(data); + + return ret; +} + static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) { u32 result, address; @@ -1335,7 +1365,17 @@ static int ath10k_download_cal_data(struct ath10k *ar) } ath10k_dbg(ar, ATH10K_DBG_BOOT, - "boot did not find DT entry, try OTP next: %d\n", + "boot did not find DT entry, try target EEPROM next: %d\n", + ret); + + ret = ath10k_download_cal_eeprom(ar); + if (ret == 0) { + ar->cal_mode = ATH10K_CAL_MODE_EEPROM; + goto done; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find target EEPROM entry, try OTP next: %d\n", ret); ret = ath10k_download_and_run_otp(ar); diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 4462c3f..3387733 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -578,6 +578,7 @@ enum ath10k_cal_mode { ATH10K_CAL_MODE_DT, ATH10K_PRE_CAL_MODE_FILE, ATH10K_PRE_CAL_MODE_DT, + ATH10K_CAL_MODE_EEPROM, }; enum ath10k_crypt_mode { @@ -600,6 +601,8 @@ static inline const char *ath10k_cal_mode_str(enum ath10k_cal_mode mode) return "pre-cal-file"; case ATH10K_PRE_CAL_MODE_DT: return "pre-cal-dt"; + case ATH10K_CAL_MODE_EEPROM: + return "eeprom"; } return "unknown"; diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h index 89e7076..b2566b0 100644 --- a/drivers/net/wireless/ath/ath10k/hif.h +++ b/drivers/net/wireless/ath/ath10k/hif.h @@ -87,6 +87,10 @@ struct ath10k_hif_ops { int (*suspend)(struct ath10k *ar); int (*resume)(struct ath10k *ar); + + /* fetch calibration data from target eeprom */ + int (*fetch_cal_eeprom)(struct ath10k *ar, void **data, + size_t *data_len); }; static inline int ath10k_hif_tx_sg(struct ath10k *ar, u8 pipe_id, @@ -202,4 +206,14 @@ static inline void ath10k_hif_write32(struct ath10k *ar, ar->hif.ops->write32(ar, address, data); } +static inline int ath10k_hif_fetch_cal_eeprom(struct ath10k *ar, + void **data, + size_t *data_len) +{ + if (!ar->hif.ops->fetch_cal_eeprom) + return -EOPNOTSUPP; + + return ar->hif.ops->fetch_cal_eeprom(ar, data, data_len); +} + #endif /* _HIF_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 5ef1fa0..49097af 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -568,7 +568,10 @@ enum ath10k_hw_4addr_pad { #define WLAN_SYSTEM_SLEEP_DISABLE_MASK 0x00000001 #define WLAN_GPIO_PIN0_ADDRESS 0x00000028 +#define WLAN_GPIO_PIN0_CONFIG_LSB 11 #define WLAN_GPIO_PIN0_CONFIG_MASK 0x00007800 +#define WLAN_GPIO_PIN0_PAD_PULL_LSB 5 +#define WLAN_GPIO_PIN0_PAD_PULL_MASK 0x00000060 #define WLAN_GPIO_PIN1_ADDRESS 0x0000002c #define WLAN_GPIO_PIN1_CONFIG_MASK 0x00007800 #define WLAN_GPIO_PIN10_ADDRESS 0x00000050 @@ -581,6 +584,8 @@ enum ath10k_hw_4addr_pad { #define CLOCK_GPIO_BT_CLK_OUT_EN_MASK 0 #define SI_CONFIG_OFFSET 0x00000000 +#define SI_CONFIG_ERR_INT_LSB 19 +#define SI_CONFIG_ERR_INT_MASK 0x00080000 #define SI_CONFIG_BIDIR_OD_DATA_LSB 18 #define SI_CONFIG_BIDIR_OD_DATA_MASK 0x00040000 #define SI_CONFIG_I2C_LSB 16 @@ -594,7 +599,9 @@ enum ath10k_hw_4addr_pad { #define SI_CONFIG_DIVIDER_LSB 0 #define SI_CONFIG_DIVIDER_MASK 0x0000000f #define SI_CS_OFFSET 0x00000004 +#define SI_CS_DONE_ERR_LSB 10 #define SI_CS_DONE_ERR_MASK 0x00000400 +#define SI_CS_DONE_INT_LSB 9 #define SI_CS_DONE_INT_MASK 0x00000200 #define SI_CS_START_LSB 8 #define SI_CS_START_MASK 0x00000100 @@ -645,7 +652,10 @@ enum ath10k_hw_4addr_pad { #define GPIO_BASE_ADDRESS WLAN_GPIO_BASE_ADDRESS #define GPIO_PIN0_OFFSET WLAN_GPIO_PIN0_ADDRESS #define GPIO_PIN1_OFFSET WLAN_GPIO_PIN1_ADDRESS +#define GPIO_PIN0_CONFIG_LSB WLAN_GPIO_PIN0_CONFIG_LSB #define GPIO_PIN0_CONFIG_MASK WLAN_GPIO_PIN0_CONFIG_MASK +#define GPIO_PIN0_PAD_PULL_LSB WLAN_GPIO_PIN0_PAD_PULL_LSB +#define GPIO_PIN0_PAD_PULL_MASK WLAN_GPIO_PIN0_PAD_PULL_MASK #define GPIO_PIN1_CONFIG_MASK WLAN_GPIO_PIN1_CONFIG_MASK #define SI_BASE_ADDRESS WLAN_SI_BASE_ADDRESS #define SCRATCH_BASE_ADDRESS SOC_CORE_BASE_ADDRESS @@ -700,6 +710,18 @@ enum ath10k_hw_4addr_pad { #define WINDOW_READ_ADDR_ADDRESS MISSING #define WINDOW_WRITE_ADDR_ADDRESS MISSING +#define QCA9887_1_0_I2C_SDA_GPIO_PIN 5 +#define QCA9887_1_0_I2C_SDA_PIN_CONFIG 3 +#define QCA9887_1_0_SI_CLK_GPIO_PIN 17 +#define QCA9887_1_0_SI_CLK_PIN_CONFIG 3 +#define QCA9887_1_0_GPIO_ENABLE_W1TS_LOW_ADDRESS 0x00000010 + +#define QCA9887_EEPROM_SELECT_READ 0xa10000a0 +#define QCA9887_EEPROM_ADDR_HI_MASK 0x0000ff00 +#define QCA9887_EEPROM_ADDR_HI_LSB 8 +#define QCA9887_EEPROM_ADDR_LO_MASK 0x00ff0000 +#define QCA9887_EEPROM_ADDR_LO_LSB 16 + #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB) #endif /* _HW_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 3e8e7ed..f06dd39 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2577,6 +2577,144 @@ static int ath10k_pci_hif_resume(struct ath10k *ar) } #endif +static bool ath10k_pci_validate_cal(void *data, size_t size) +{ + __le16 *cal_words = data; + u16 checksum = 0; + size_t i; + + if (size % 2 != 0) + return false; + + for (i = 0; i < size / 2; i++) + checksum ^= le16_to_cpu(cal_words[i]); + + return checksum == 0xffff; +} + +static void ath10k_pci_enable_eeprom(struct ath10k *ar) +{ + /* Enable SI clock */ + ath10k_pci_soc_write32(ar, CLOCK_CONTROL_OFFSET, 0x0); + + /* Configure GPIOs for I2C operation */ + ath10k_pci_write32(ar, + GPIO_BASE_ADDRESS + GPIO_PIN0_OFFSET + + 4 * QCA9887_1_0_I2C_SDA_GPIO_PIN, + SM(QCA9887_1_0_I2C_SDA_PIN_CONFIG, + GPIO_PIN0_CONFIG) | + SM(1, GPIO_PIN0_PAD_PULL)); + + ath10k_pci_write32(ar, + GPIO_BASE_ADDRESS + GPIO_PIN0_OFFSET + + 4 * QCA9887_1_0_SI_CLK_GPIO_PIN, + SM(QCA9887_1_0_SI_CLK_PIN_CONFIG, GPIO_PIN0_CONFIG) | + SM(1, GPIO_PIN0_PAD_PULL)); + + ath10k_pci_write32(ar, + GPIO_BASE_ADDRESS + + QCA9887_1_0_GPIO_ENABLE_W1TS_LOW_ADDRESS, + 1u << QCA9887_1_0_SI_CLK_GPIO_PIN); + + /* In Swift ASIC - EEPROM clock will be (110MHz/512) = 214KHz */ + ath10k_pci_write32(ar, + SI_BASE_ADDRESS + SI_CONFIG_OFFSET, + SM(1, SI_CONFIG_ERR_INT) | + SM(1, SI_CONFIG_BIDIR_OD_DATA) | + SM(1, SI_CONFIG_I2C) | + SM(1, SI_CONFIG_POS_SAMPLE) | + SM(1, SI_CONFIG_INACTIVE_DATA) | + SM(1, SI_CONFIG_INACTIVE_CLK) | + SM(8, SI_CONFIG_DIVIDER)); +} + +static int ath10k_pci_read_eeprom(struct ath10k *ar, u16 addr, u8 *out) +{ + u32 reg; + int wait_limit; + + /* set device select byte and for the read operation */ + reg = QCA9887_EEPROM_SELECT_READ | + SM(addr, QCA9887_EEPROM_ADDR_LO) | + SM(addr >> 8, QCA9887_EEPROM_ADDR_HI); + ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_TX_DATA0_OFFSET, reg); + + /* write transmit data, transfer length, and START bit */ + ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET, + SM(1, SI_CS_START) | SM(1, SI_CS_RX_CNT) | + SM(4, SI_CS_TX_CNT)); + + /* wait max 1 sec */ + wait_limit = 100000; + + /* wait for SI_CS_DONE_INT */ + do { + reg = ath10k_pci_read32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET); + if (MS(reg, SI_CS_DONE_INT)) + break; + + wait_limit--; + udelay(10); + } while (wait_limit > 0); + + if (!MS(reg, SI_CS_DONE_INT)) { + ath10k_err(ar, "timeout while reading device EEPROM at %04x\n", + addr); + return -ETIMEDOUT; + } + + /* clear SI_CS_DONE_INT */ + ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET, reg); + + if (MS(reg, SI_CS_DONE_ERR)) { + ath10k_err(ar, "failed to read device EEPROM at %04x\n", addr); + return -EIO; + } + + /* extract receive data */ + reg = ath10k_pci_read32(ar, SI_BASE_ADDRESS + SI_RX_DATA0_OFFSET); + *out = reg; + + return 0; +} + +static int ath10k_pci_hif_fetch_cal_eeprom(struct ath10k *ar, void **data, + size_t *data_len) +{ + u8 *caldata = NULL; + size_t calsize, i; + int ret; + + if (!QCA_REV_9887(ar)) + return -EOPNOTSUPP; + + calsize = ar->hw_params.cal_data_len; + caldata = kmalloc(calsize, GFP_KERNEL); + if (!caldata) + return -ENOMEM; + + ath10k_pci_enable_eeprom(ar); + + for (i = 0; i < calsize; i++) { + ret = ath10k_pci_read_eeprom(ar, i, &caldata[i]); + if (ret) + goto err_free; + } + + if (!ath10k_pci_validate_cal(caldata, calsize)) + goto err_free; + + *data = caldata; + *data_len = calsize; + + return 0; + +err_free: + kfree(data); + + return -EINVAL; +} + static const struct ath10k_hif_ops ath10k_pci_hif_ops = { .tx_sg = ath10k_pci_hif_tx_sg, .diag_read = ath10k_pci_hif_diag_read, @@ -2596,6 +2734,7 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = { .suspend = ath10k_pci_hif_suspend, .resume = ath10k_pci_hif_resume, #endif + .fetch_cal_eeprom = ath10k_pci_hif_fetch_cal_eeprom, }; /* |