summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-07 20:55:16 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-07 20:55:16 +0900
commit5e090ed7af10729a396a25df43d69a236e789736 (patch)
tree09ba2dd9974b5224721fbc413bcf6ac9b2ac73f9
parent84424026c0a910886064049d414a12a4f4dd125e (diff)
parent54d69df5849ec2e660aa12ac75562618c10fb499 (diff)
downloadop-kernel-dev-5e090ed7af10729a396a25df43d69a236e789736.zip
op-kernel-dev-5e090ed7af10729a396a25df43d69a236e789736.tar.gz
Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
-rw-r--r--Documentation/devicetree/bindings/crypto/mv_cesa.txt20
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-fan.txt25
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mvebu.txt53
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt95
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt100
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt72
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt279
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt46
-rw-r--r--arch/arm/Kconfig15
-rw-r--r--arch/arm/boot/dts/Makefile6
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi5
-rw-r--r--arch/arm/boot/dts/armada-370.dtsi44
-rw-r--r--arch/arm/boot/dts/armada-xp-db.dts4
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78230.dtsi57
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi70
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78460.dtsi70
-rw-r--r--arch/arm/boot/dts/dove-cm-a510.dts38
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts42
-rw-r--r--arch/arm/boot/dts/dove-dove-db.dts38
-rw-r--r--arch/arm/boot/dts/dove.dtsi143
-rw-r--r--arch/arm/boot/dts/kirkwood-dnskw.dtsi10
-rw-r--r--arch/arm/boot/dts/kirkwood-dockstar.dts57
-rw-r--r--arch/arm/boot/dts/kirkwood-iconnect.dts50
-rw-r--r--arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts105
-rw-r--r--arch/arm/boot/dts/kirkwood-km_kirkwood.dts29
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi12
-rw-r--r--arch/arm/configs/kirkwood_defconfig38
-rw-r--r--arch/arm/configs/mvebu_defconfig2
-rw-r--r--arch/arm/mach-dove/Kconfig7
-rw-r--r--arch/arm/mach-dove/Makefile4
-rw-r--r--arch/arm/mach-dove/common.c157
-rw-r--r--arch/arm/mach-dove/common.h4
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h16
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h126
-rw-r--r--arch/arm/mach-dove/include/mach/pm.h54
-rw-r--r--arch/arm/mach-dove/irq.c10
-rw-r--r--arch/arm/mach-dove/pcie.c6
-rw-r--r--arch/arm/mach-kirkwood/Kconfig21
-rw-r--r--arch/arm/mach-kirkwood/Makefile3
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c3
-rw-r--r--arch/arm/mach-kirkwood/board-dnskw.c35
-rw-r--r--arch/arm/mach-kirkwood/board-dockstar.c61
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c14
-rw-r--r--arch/arm/mach-kirkwood/board-iconnect.c48
-rw-r--r--arch/arm/mach-kirkwood/board-iomega_ix2_200.c57
-rw-r--r--arch/arm/mach-kirkwood/board-km_kirkwood.c57
-rw-r--r--arch/arm/mach-kirkwood/common.c8
-rw-r--r--arch/arm/mach-kirkwood/common.h18
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h20
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h112
-rw-r--r--arch/arm/mach-kirkwood/irq.c9
-rw-r--r--arch/arm/mach-kirkwood/pcie.c12
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c3
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c6
-rw-r--r--arch/arm/mach-mv78xx0/common.c4
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/bridge-regs.h12
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h86
-rw-r--r--arch/arm/mach-mv78xx0/irq.c9
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c12
-rw-r--r--arch/arm/mach-mvebu/Kconfig20
-rw-r--r--arch/arm/mach-mvebu/Makefile5
-rw-r--r--arch/arm/mach-mvebu/addr-map.c134
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.c2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h2
-rw-r--r--arch/arm/mach-mvebu/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-omap1/devices.c28
-rw-r--r--arch/arm/mach-omap1/timer.c2
-rw-r--r--arch/arm/mach-omap2/Makefile1
-rw-r--r--arch/arm/mach-omap2/board-apollon.c4
-rw-r--r--arch/arm/mach-omap2/board-h4.c6
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/clkt2xxx_apll.c2
-rw-r--r--arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c10
-rw-r--r--arch/arm/mach-omap2/clkt34xx_dpll3m2.c20
-rw-r--r--arch/arm/mach-omap2/clkt_clksel.c86
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c26
-rw-r--r--arch/arm/mach-omap2/clock.c9
-rw-r--r--arch/arm/mach-omap2/clock2420_data.c24
-rw-r--r--arch/arm/mach-omap2/clock2430_data.c23
-rw-r--r--arch/arm/mach-omap2/clock33xx_data.c1
-rw-r--r--arch/arm/mach-omap2/clock3xxx.c8
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c37
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c21
-rw-r--r--arch/arm/mach-omap2/clockdomain.c17
-rw-r--r--arch/arm/mach-omap2/clockdomain.h20
-rw-r--r--arch/arm/mach-omap2/clockdomain2xxx_3xxx.c49
-rw-r--r--arch/arm/mach-omap2/clockdomain44xx.c11
-rw-r--r--arch/arm/mach-omap2/clockdomains3xxx_data.c7
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c3
-rw-r--r--arch/arm/mach-omap2/cm-regbits-33xx.h158
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h2
-rw-r--r--arch/arm/mach-omap2/cm-regbits-44xx.h411
-rw-r--r--arch/arm/mach-omap2/cm2xxx_3xxx.c2
-rw-r--r--arch/arm/mach-omap2/cm2xxx_3xxx.h1
-rw-r--r--arch/arm/mach-omap2/control.h1
-rw-r--r--arch/arm/mach-omap2/devices.c39
-rw-r--r--arch/arm/mach-omap2/display.c4
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c48
-rw-r--r--arch/arm/mach-omap2/gpmc.c194
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c138
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c19
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c19
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c17
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c110
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c280
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c243
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h6
-rw-r--r--arch/arm/mach-omap2/pm.c5
-rw-r--r--arch/arm/mach-omap2/pmu.c95
-rw-r--r--arch/arm/mach-omap2/powerdomain44xx.c61
-rw-r--r--arch/arm/mach-omap2/prcm-common.h2
-rw-r--r--arch/arm/mach-orion5x/addr-map.c3
-rw-r--r--arch/arm/mach-orion5x/common.c4
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c2
-rw-r--r--arch/arm/mach-orion5x/include/mach/bridge-regs.h20
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h56
-rw-r--r--arch/arm/mach-orion5x/irq.c5
-rw-r--r--arch/arm/mach-orion5x/pci.c6
-rw-r--r--arch/arm/plat-omap/clock.c27
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h5
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h1
-rw-r--r--arch/arm/plat-omap/include/plat/iommu.h15
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h4
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h26
-rw-r--r--arch/arm/plat-omap/omap_device.c59
-rw-r--r--arch/arm/plat-orion/Makefile10
-rw-r--r--arch/arm/plat-orion/addr-map.c11
-rw-r--r--arch/arm/plat-orion/common.c12
-rw-r--r--arch/arm/plat-orion/include/plat/addr-map.h4
-rw-r--r--arch/arm/plat-orion/include/plat/common.h8
-rw-r--r--arch/arm/plat-orion/include/plat/mpp.h2
-rw-r--r--arch/arm/plat-orion/include/plat/time.h4
-rw-r--r--arch/arm/plat-orion/mpp.c6
-rw-r--r--arch/arm/plat-orion/time.c8
-rw-r--r--drivers/char/hw_random/omap-rng.c121
-rw-r--r--drivers/crypto/mv_cesa.c17
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-mvebu.c679
-rw-r--r--drivers/hwmon/gpio-fan.c120
-rw-r--r--drivers/pinctrl/Kconfig22
-rw-r--r--drivers/pinctrl/Makefile5
-rw-r--r--drivers/pinctrl/pinctrl-armada-370.c421
-rw-r--r--drivers/pinctrl/pinctrl-armada-xp.c468
-rw-r--r--drivers/pinctrl/pinctrl-dove.c620
-rw-r--r--drivers/pinctrl/pinctrl-kirkwood.c472
-rw-r--r--drivers/pinctrl/pinctrl-mvebu.c754
-rw-r--r--drivers/pinctrl/pinctrl-mvebu.h192
-rw-r--r--drivers/spi/spi-omap-100k.c2
-rw-r--r--drivers/spi/spi-omap2-mcspi.c1
150 files changed, 8269 insertions, 885 deletions
diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
new file mode 100644
index 0000000..47229b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
@@ -0,0 +1,20 @@
+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible : should be "marvell,orion-crypto"
+- reg : base physical address of the engine and length of memory mapped
+ region, followed by base physical address of sram and its memory
+ length
+- reg-names : "regs" , "sram";
+- interrupts : interrupt number
+
+Examples:
+
+ crypto@30000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x30000 0x10000>,
+ <0x4000000 0x800>;
+ reg-names = "regs" , "sram";
+ interrupts = <22>;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
new file mode 100644
index 0000000..2dd457a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
@@ -0,0 +1,25 @@
+Bindings for fan connected to GPIO lines
+
+Required properties:
+- compatible : "gpio-fan"
+- gpios: Specifies the pins that map to bits in the control value,
+ ordered MSB-->LSB.
+- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
+ control value that should be set to achieve them. This array
+ must have the RPM values in ascending order.
+
+Optional properties:
+- alarm-gpios: This pin going active indicates something is wrong with
+ the fan, and a udev event will be fired.
+
+Examples:
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio1 14 1
+ &gpio1 13 1>;
+ gpio-fan,speed-map = <0 0
+ 3000 1
+ 6000 2>;
+ alarm-gpios = <&gpio1 15 1>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
new file mode 100644
index 0000000..a6f3bec
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@@ -0,0 +1,53 @@
+* Marvell EBU GPIO controller
+
+Required properties:
+
+- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
+ or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
+ Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
+ 370. "marvell,mv78200-gpio" should be used for the Discovery
+ MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
+ SoCs (MV78230, MV78260, MV78460).
+
+- reg: Address and length of the register set for the device. Only one
+ entry is expected, except for the "marvell,armadaxp-gpio" variant
+ for which two entries are expected: one for the general registers,
+ one for the per-cpu registers.
+
+- interrupts: The list of interrupts that are used for all the pins
+ managed by this GPIO bank. There can be more than one interrupt
+ (example: 1 interrupt per 8 pins on Armada XP, which means 4
+ interrupts per bank of 32 GPIOs).
+
+- interrupt-controller: identifies the node as an interrupt controller
+
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. Should be two.
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+
+- gpio-controller: marks the device node as a gpio controller
+
+- ngpios: number of GPIOs this controller has
+
+- #gpio-cells: Should be two. The first cell is the pin number. The
+ second cell is reserved for flags, unused at the moment.
+
+Example:
+
+ gpio0: gpio@d0018100 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018100 0x40>,
+ <0xd0018800 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <16>, <17>, <18>, <19>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000..01ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, uart0(rxd)
+mpp1 1 gpo, uart0(txd)
+mpp2 2 gpio, i2c0(sck), uart0(txd)
+mpp3 3 gpio, i2c0(sda), uart0(rxd)
+mpp4 4 gpio, cpu_pd(vdd)
+mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+ sata1(prsnt), spi1(cs1)
+mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+ audio(spdifi)
+mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+ audio(rmclk)
+mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+ spi0(cs2)
+mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+ spi0(cs3)
+mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17 17 gpo, ge(mdc)
+mpp18 18 gpio, ge(mdio)
+mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20 20 gpo, ge0(txd4), ge1(txd0)
+mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28 28 gpio, ge0(rxd5), ge1(rxd3)
+mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31 31 gpio, tclk, ge0(txerr)
+mpp32 32 gpio, spi0(cs0)
+mpp33 33 gpio, dev(bootcs), spi0(cs0)
+mpp34 34 gpo, dev(wen0), spi0(mosi)
+mpp35 35 gpo, dev(oen), spi0(sck)
+mpp36 36 gpo, dev(a1), spi0(miso)
+mpp37 37 gpo, dev(a0), sata0(prsnt)
+mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39 39 gpo, dev(ad0), audio(spdifo)
+mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41 41 gpio, dev(ad2), uart1(rxd)
+mpp42 42 gpo, dev(ad3), uart1(txd)
+mpp43 43 gpo, dev(ad4), audio(bclk)
+mpp44 44 gpo, dev(ad5), audio(mclk)
+mpp45 45 gpo, dev(ad6), audio(lrclk)
+mpp46 46 gpo, dev(ad7), audio(sdo)
+mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+ spi0(cs1)
+mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+ audio(spdifi)
+mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+ audio(rmclk)
+mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+ pcie(clkreq1)
+mpp54 54 gpo, dev(ad15), tdm(dtx)
+mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+ sata0(prsnt)
+mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+ pcie(clkreq0), spi1(cs1)
+mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+ audio(sdo)
+mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+ uart0(rts)
+mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+ audio(sdi)
+mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+ audio(mclk), uart0(cts)
+mpp63 63 gpo, spi0(sck), tclk
+mpp64 64 gpio, spi0(miso), spi0-1(cs1)
+mpp65 65 gpio, spi0(mosi), spi0-1(cs2)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 0000000..bfa0a2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,100 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+ "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name pins functions
+================================================================================
+mpp0 0 gpio, ge0(txclko), lcd(d0)
+mpp1 1 gpio, ge0(txd0), lcd(d1)
+mpp2 2 gpio, ge0(txd1), lcd(d2)
+mpp3 3 gpio, ge0(txd2), lcd(d3)
+mpp4 4 gpio, ge0(txd3), lcd(d4)
+mpp5 5 gpio, ge0(txctl), lcd(d5)
+mpp6 6 gpio, ge0(rxd0), lcd(d6)
+mpp7 7 gpio, ge0(rxd1), lcd(d7)
+mpp8 8 gpio, ge0(rxd2), lcd(d8)
+mpp9 9 gpio, ge0(rxd3), lcd(d9)
+mpp10 10 gpio, ge0(rxctl), lcd(d10)
+mpp11 11 gpio, ge0(rxclk), lcd(d11)
+mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30 30 gpio, tdm(int1), sd0(clk)
+mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36 36 gpio, spi(mosi)
+mpp37 37 gpio, spi(miso)
+mpp38 38 gpio, spi(sck)
+mpp39 39 gpio, spi(cs0)
+mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+ pcie(clkreq0)
+mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+ pcie(clkreq1)
+mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+ vdd(cpu0-pd)
+mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+ vdd(cpu2-3-pd){1}
+mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+ mem(bat)
+mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+ ref(clkout)
+mpp48 48 gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name pins functions
+================================================================================
+mpp49 49 gpio, dev(we3)
+mpp50 50 gpio, dev(we2)
+mpp51 51 gpio, dev(ad16)
+mpp52 52 gpio, dev(ad17)
+mpp53 53 gpio, dev(ad18)
+mpp54 54 gpio, dev(ad19)
+mpp55 55 gpio, dev(ad20), vdd(cpu0-pd)
+mpp56 56 gpio, dev(ad21), vdd(cpu1-pd)
+mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58 58 gpio, dev(ad23)
+mpp59 59 gpio, dev(ad24)
+mpp60 60 gpio, dev(ad25)
+mpp61 61 gpio, dev(ad26)
+mpp62 62 gpio, dev(ad27)
+mpp63 63 gpio, dev(ad28)
+mpp64 64 gpio, dev(ad29)
+mpp65 65 gpio, dev(ad30)
+mpp66 66 gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000..a648aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,72 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+ uart1(rts)
+mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+ uart1(cts), lcd-spi(cs1)
+mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8 8 gpio, pmu, watchdog(rstout)
+mpp9 9 gpio, pmu, pex1(clkreq)
+mpp10 10 gpio, pmu, ssp(sclk)
+mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+ sdio1(ledctrl), pex0(clkreq)
+mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+ ssp(extclk)
+mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+ ac97-1(sysclko)
+mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+ ac97(sysclko)
+mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+ uart1(cts), ssp(sfrm)
+mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+ lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+ lcd-spi(sck), ssp(sclk)
+mpp_camera 24-39 gpio, camera
+mpp_sdio0 40-45 gpio, sdio0
+mpp_sdio1 46-51 gpio, sdio1
+mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+ ssp/twsi
+mpp_spi0 58-61 gpio, spi0
+mpp_uart1 62-63 gpio, uart1
+mpp_nand 64-71 gpo, nand
+audio0 - i2s, ac97
+twsi - none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+ - gpio : gpio on pins 52-57
+ - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+ - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57
+ - spdifo : spdifo on pin 57, gpio on pins 52-55
+ - twsi : twsi on pins 56,57, gpio on pins 52-55
+ - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios
+ - ssp : ssp on pins 52-55, gpio on pins 56,57
+ - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+ audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000..361bccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+ "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+ "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17 17 gpio, sdio(d3)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, mii(rxerr)
+mpp21 21 gpio, audio(spdifi)
+mpp22 22 gpio, audio(spdifo)
+mpp23 23 gpio, audio(rmclk)
+mpp24 24 gpio, audio(bclk)
+mpp25 25 gpio, audio(sdo)
+mpp26 26 gpio, audio(lrclk)
+mpp27 27 gpio, audio(mclk)
+mpp28 28 gpio, audio(sdi)
+mpp29 29 gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0)
+mpp21 21 gpio, ge1(txd1), sata0(act)
+mpp22 22 gpio, ge1(txd2)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt)
+mpp24 24 gpio, ge1(rxd0)
+mpp25 25 gpio, ge1(rxd1)
+mpp26 26 gpio, ge1(rxd2)
+mpp27 27 gpio, ge1(rxd3)
+mpp28 28 gpio, ge1(col)
+mpp29 29 gpio, ge1(txclk)
+mpp30 30 gpio, ge1(rxclk)
+mpp31 31 gpio, ge1(rxclk)
+mpp32 32 gpio, ge1(txclko)
+mpp33 33 gpo, ge1(txclk)
+mpp34 34 gpio, ge1(txen)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33 33 gpo, ge1(txclk), tdm(drx)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpio, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33 33 gpo, ge1(txclk), tdm(drx)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45 45 gpio, ts(mp9), tdm(pclk)
+mpp46 46 gpio, ts(mp10), tdm(fs)
+mpp47 47 gpio, ts(mp11), tdm(drx)
+mpp48 48 gpio, ts(mp12), tdm(dtx)
+mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6 6 sysrst(out), spi(mosi)
+mpp7 7 gpo, spi(cs), lcd(pwm)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+ mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+ sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+ audio(spdifi), audio-1(sdi)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+ spi(cs)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act), lcd(extclk)
+mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18 18 gpo, nand(io0), pex(clkreq)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act), lcd(d0)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo), lcd(d1)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt), lcd(d2)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk), lcd(d3)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+ lcd(d4)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+ lcd(d5)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+ lcd(d6)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+ lcd(d7)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+ lcd(d8)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+ lcd(d15)
+mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 0000000..0a26c3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+ Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+ marvell,pins given in this pin configuration node. The function has to be
+ common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+ valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <7>;
+
+ pinctrl-0 = <&pmx_uart1_sw>;
+ pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+ compatible = "marvell,dove-pinctrl";
+ reg = <0xd0200 0x20>;
+
+ pmx_uart1_sw: pmx-uart1-sw {
+ marvell,pins = "mpp_uart1";
+ marvell,function = "uart1";
+ };
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3975d10..8ac460a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -529,10 +529,11 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
- select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select MIGHT_HAVE_PCI
+ select PLAT_ORION_LEGACY
+ select USB_ARCH_HAS_EHCI
help
Support for the Marvell Dove SoC 88AP510
@@ -542,7 +543,7 @@ config ARCH_KIRKWOOD
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
@@ -568,7 +569,7 @@ config ARCH_MV78XX0
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
@@ -580,7 +581,7 @@ config ARCH_ORION5X
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select PLAT_ORION
+ select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -1138,6 +1139,10 @@ config PLAT_ORION
select IRQ_DOMAIN
select COMMON_CLK
+config PLAT_ORION_LEGACY
+ bool
+ select PLAT_ORION
+
config PLAT_PXA
bool
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4745c1f..29f541f0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
usb_a9263.dtb \
usb_a9g20.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+ dove-cubox.dtb \
+ dove-dove-db.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
@@ -33,10 +36,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
+ kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
kirkwood-goflexnet.dtb \
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
+ kirkwood-iomega_ix2_200.dtb \
+ kirkwood-km_kirkwood.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-ts219-6281.dtb \
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932..16cc82c 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,11 @@
reg = <0xd0020300 0x30>;
interrupts = <37>, <38>, <39>, <40>;
};
+
+ addr-decoding@d0020000 {
+ compatible = "marvell,armada-addr-decoding-controller";
+ reg = <0xd0020000 0x258>;
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc..2069151 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -21,6 +21,12 @@
model = "Marvell Armada 370 family SoC";
compatible = "marvell,armada370", "marvell,armada-370-xp";
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
mpic: interrupt-controller@d0020000 {
reg = <0xd0020a00 0x1d0>,
<0xd0021870 0x58>;
@@ -31,5 +37,43 @@
compatible = "marvell,armada-370-xp-system-controller";
reg = <0xd0018200 0x100>;
};
+
+ pinctrl {
+ compatible = "marvell,mv88f6710-pinctrl";
+ reg = <0xd0018000 0x38>;
+ };
+
+ gpio0: gpio@d0018100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
+ };
+
+ gpio1: gpio@d0018140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018140 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <87>, <88>, <89>, <90>;
+ };
+
+ gpio2: gpio@d0018180 {
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018180 0x40>;
+ ngpios = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <91>;
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d..b1fc728 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
*/
/dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Evaluation Board";
- compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+ compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 0000000..ea35519
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+ model = "Marvell Armada XP MV78230 SoC";
+ compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
+
+ soc {
+ pinctrl {
+ compatible = "marvell,mv78230-pinctrl";
+ reg = <0xd0018000 0x38>;
+ };
+
+ gpio0: gpio@d0018100 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018100 0x40>,
+ <0xd0018800 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <16>, <17>, <18>, <19>;
+ };
+
+ gpio1: gpio@d0018140 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018140 0x40>,
+ <0xd0018840 0x30>;
+ ngpios = <17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <20>, <21>, <22>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 0000000..2057863
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+ model = "Marvell Armada XP MV78260 SoC";
+ compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ soc {
+ pinctrl {
+ compatible = "marvell,mv78260-pinctrl";
+ reg = <0xd0018000 0x38>;
+ };
+
+ gpio0: gpio@d0018100 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018100 0x40>,
+ <0xd0018800 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <16>, <17>, <18>, <19>;
+ };
+
+ gpio1: gpio@d0018140 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018140 0x40>,
+ <0xd0018840 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <20>, <21>, <22>, <23>;
+ };
+
+ gpio2: gpio@d0018180 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018180 0x40>,
+ <0xd0018870 0x30>;
+ ngpios = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 0000000..ffac983
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+ model = "Marvell Armada XP MV78460 SoC";
+ compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ soc {
+ pinctrl {
+ compatible = "marvell,mv78460-pinctrl";
+ reg = <0xd0018000 0x38>;
+ };
+
+ gpio0: gpio@d0018100 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018100 0x40>,
+ <0xd0018800 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <16>, <17>, <18>, <19>;
+ };
+
+ gpio1: gpio@d0018140 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018140 0x40>,
+ <0xd0018840 0x30>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <20>, <21>, <22>, <23>;
+ };
+
+ gpio2: gpio@d0018180 {
+ compatible = "marvell,armadaxp-gpio";
+ reg = <0xd0018180 0x40>,
+ <0xd0018870 0x30>;
+ ngpios = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupts-cells = <2>;
+ interrupts = <24>;
+ };
+ };
+ };
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
new file mode 100644
index 0000000..61a8062
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+ model = "Compulab CM-A510";
+ compatible = "compulab,cm-a510", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+ status = "okay";
+
+ /* spi0.0: 4M Flash Winbond W25Q32BV */
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 0000000..0adbd5a
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+ model = "SolidRun CuBox";
+ compatible = "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power {
+ label = "Power";
+ gpios = <&gpio0 18 1>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+ status = "okay";
+
+ /* spi0.0: 4M Flash Winbond W25Q32BV */
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
new file mode 100644
index 0000000..e5a920b
--- /dev/null
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+ model = "Marvell DB-MV88AP510-BP Development Board";
+ compatible = "marvell,dove-db", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+ status = "okay";
+
+ /* spi0.0: 4M Flash ST-M25P32-VMF6P */
+ spi-flash@0 {
+ compatible = "st,m25p32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
new file mode 100644
index 0000000..96fb824
--- /dev/null
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "marvell,dove";
+ model = "Marvell Armada 88AP510 SoC";
+
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xf1020204 0x04>,
+ <0xf1020214 0x04>;
+ };
+
+ mbus@f1000000 {
+ compatible = "simple-bus";
+ ranges = <0 0xf1000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@12000 {
+ compatible = "ns16550a";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <7>;
+ clock-frequency = <166666667>;
+ status = "disabled";
+ };
+
+ uart1: serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <8>;
+ clock-frequency = <166666667>;
+ status = "disabled";
+ };
+
+ uart2: serial@12200 {
+ compatible = "ns16550a";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clock-frequency = <166666667>;
+ status = "disabled";
+ };
+
+ uart3: serial@12300 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clock-frequency = <166666667>;
+ status = "disabled";
+ };
+
+ wdt: wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ };
+
+ gpio0: gpio@d0400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0400 0x20>;
+ ngpio = <32>;
+ interrupts = <12>, <13>, <14>, <60>;
+ };
+
+ gpio1: gpio@d0420 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0420 0x20>;
+ ngpio = <32>;
+ interrupts = <61>;
+ };
+
+ gpio2: gpio@e8400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe8400 0x0c>;
+ ngpio = <8>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <6>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
+
+ spi1: spi@14600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <5>;
+ reg = <0x14600 0x28>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <11>;
+ clock-frequency = <400000>;
+ timeout-ms = <1000>;
+ status = "disabled";
+ };
+
+ sdio0: sdio@92000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x92000 0x100>;
+ interrupts = <35>, <37>;
+ status = "disabled";
+ };
+
+ sdio1: sdio@90000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x90000 0x100>;
+ interrupts = <36>, <38>;
+ status = "disabled";
+ };
+
+ sata0: sata@a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x2400>;
+ interrupts = <62>;
+ nr-ports = <1>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 7408655..9b32d02 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -25,6 +25,16 @@
};
};
+ gpio_fan {
+ /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+ compatible = "gpio-fan";
+ gpios = <&gpio1 14 1
+ &gpio1 13 1>;
+ gpio-fan,speed-map = <0 0
+ 3000 1
+ 6000 2>;
+ };
+
ocp@f1000000 {
sata@80000 {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
new file mode 100644
index 0000000..08a5824
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Seagate FreeAgent Dockstar";
+ compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ nand@3000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "data";
+ reg = <0x0500000 0xfb00000>;
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 1>;
+ linux,default-trigger = "default-on";
+ };
+ fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index f8ca6fa..d97cd9d 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -12,7 +12,7 @@
};
chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
linux,initrd-start = <0x4500040>;
linux,initrd-end = <0x4800000>;
};
@@ -30,7 +30,37 @@
clock-frequency = <200000000>;
status = "ok";
};
+
+ nand@3000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0xc0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0xa0000 0x20000>;
+ };
+
+ partition@100000 {
+ label = "zImage";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@540000 {
+ label = "initrd";
+ reg = <0x540000 0x300000>;
+ };
+
+ partition@980000 {
+ label = "boot";
+ reg = <0x980000 0x1f400000>;
+ };
+ };
};
+
gpio-leds {
compatible = "gpio-leds";
@@ -69,4 +99,22 @@
gpios = <&gpio1 16 0>;
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "OTB Button";
+ linux,code = <133>;
+ gpios = <&gpio1 3 1>;
+ debounce-interval = <100>;
+ };
+ button@2 {
+ label = "Reset";
+ linux,code = <0x198>;
+ gpios = <&gpio0 12 1>;
+ debounce-interval = <100>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 0000000..865aeec
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Iomega StorCenter ix2-200";
+ compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+
+ lm63: lm63@4c {
+ compatible = "national,lm63";
+ reg = <0x4c>;
+ };
+ };
+
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ nand@3000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0xa0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "uInitrd";
+ reg = <0x540000 0x1000000>;
+ };
+ };
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_led {
+ label = "status:white:power_led";
+ gpios = <&gpio0 16 0>;
+ linux,default-trigger = "default-on";
+ };
+ health_led1 {
+ label = "status:red:health_led";
+ gpios = <&gpio1 5 0>;
+ };
+ health_led2 {
+ label = "status:white:health_led";
+ gpios = <&gpio1 4 0>;
+ };
+ backup_led {
+ label = "status:blue:backup_led";
+ gpios = <&gpio0 15 0>;
+ };
+ };
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ Power {
+ label = "Power Button";
+ linux,code = <116>;
+ gpios = <&gpio0 14 1>;
+ };
+ Reset {
+ label = "Reset Button";
+ linux,code = <0x198>;
+ gpios = <&gpio0 12 1>;
+ };
+ OTB {
+ label = "OTB Button";
+ linux,code = <133>;
+ gpios = <&gpio1 3 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 0000000..75bdb93
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Keymile Kirkwood Reference Design";
+ compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ nand@3000000 {
+ status = "ok";
+ chip-delay = <25>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cef9616..4e5b815 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -14,7 +14,8 @@
ocp@f1000000 {
compatible = "simple-bus";
- ranges = <0 0xf1000000 0x4000000>;
+ ranges = <0x00000000 0xf1000000 0x4000000
+ 0xf5000000 0xf5000000 0x0000400>;
#address-cells = <1>;
#size-cells = <1>;
@@ -105,5 +106,14 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ crypto@30000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x30000 0x10000>,
+ <0xf5000000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <22>;
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index aeb3af5..74eee0c 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,5 +1,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
@@ -15,9 +17,19 @@ CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_ESATA_SHEEVAPLUG=y
CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_DREAMPLUG_DT=y
+CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_DLINK_KIRKWOOD_DT=y
+CONFIG_MACH_IB62X0_DT=y
+CONFIG_MACH_TS219_DT=y
+CONFIG_MACH_DOCKSTAR_DT=y
+CONFIG_MACH_GOFLEXNET_DT=y
+CONFIG_MACH_LSXL_DT=y
+CONFIG_MACH_IOMEGA_IX2_200_DT=y
+CONFIG_MACH_KM_KIRKWOOD_DT=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
+CONFIG_MACH_DOCKSTAR=y
CONFIG_MACH_OPENRD_BASE=y
CONFIG_MACH_OPENRD_CLIENT=y
CONFIG_MACH_OPENRD_ULTIMATE=y
@@ -29,8 +41,6 @@ CONFIG_MACH_NET2BIG_V2=y
CONFIG_MACH_NET5BIG_V2=y
CONFIG_MACH_T5325=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
@@ -47,13 +57,11 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_PKTGEN=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -69,7 +77,6 @@ CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
@@ -78,22 +85,21 @@ CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
@@ -103,7 +109,8 @@ CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
@@ -119,10 +126,8 @@ CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
@@ -148,7 +153,6 @@ CONFIG_MV_XOR=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
@@ -158,7 +162,6 @@ CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
@@ -171,11 +174,8 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 2e86b31..7bcf850 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index dd937c5..00154e7 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -15,6 +15,13 @@ config MACH_CM_A510
Say 'Y' here if you want your kernel to support the
CompuLab CM-A510 Board.
+config MACH_DOVE_DT
+ bool "Marvell Dove Flattened Device Tree"
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Dove using flattened device tree.
+
endmenu
endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index fa0f018..5e683ba 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o mpp.o
-
+obj-y += common.o addr-map.o irq.o mpp.o
+obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 950ad95..b37bef1 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -16,6 +16,8 @@
#include <linux/clk-provider.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
@@ -24,6 +26,7 @@
#include <asm/mach/time.h>
#include <asm/mach/pci.h>
#include <mach/dove.h>
+#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include <asm/mach/arch.h>
#include <linux/irq.h>
@@ -33,19 +36,17 @@
#include <plat/addr-map.h>
#include "common.h"
-static int get_tclk(void);
-
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc dove_io_desc[] __initdata = {
{
- .virtual = DOVE_SB_REGS_VIRT_BASE,
+ .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
.length = DOVE_SB_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = DOVE_NB_REGS_VIRT_BASE,
+ .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
@@ -60,14 +61,69 @@ void __init dove_map_io(void)
/*****************************************************************************
* CLK tree
****************************************************************************/
+static int dove_tclk;
+
+static DEFINE_SPINLOCK(gating_lock);
static struct clk *tclk;
-static void __init clk_init(void)
+static struct clk __init *dove_register_gate(const char *name,
+ const char *parent, u8 bit_idx)
{
- tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
- get_tclk());
+ return clk_register_gate(NULL, name, parent, 0,
+ (void __iomem *)CLOCK_GATING_CONTROL,
+ bit_idx, 0, &gating_lock);
+}
+
+static void __init dove_clk_init(void)
+{
+ struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
+ struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
+ struct clk *xor0, *xor1, *ge, *gephy;
- orion_clkdev_init(tclk);
+ tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+ dove_tclk);
+
+ usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
+ usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
+ sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
+ pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
+ pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
+ sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
+ sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
+ nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
+ camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
+ i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
+ i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
+ crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
+ ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
+ pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
+ xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
+ xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
+ gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+ ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
+
+ orion_clkdev_add(NULL, "orion_spi.0", tclk);
+ orion_clkdev_add(NULL, "orion_spi.1", tclk);
+ orion_clkdev_add(NULL, "orion_wdt", tclk);
+ orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
+
+ orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+ orion_clkdev_add(NULL, "orion-ehci.1", usb1);
+ orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
+ orion_clkdev_add("0", "sata_mv.0", sata);
+ orion_clkdev_add("0", "pcie", pex0);
+ orion_clkdev_add("1", "pcie", pex1);
+ orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
+ orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
+ orion_clkdev_add(NULL, "orion_nand", nand);
+ orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
+ orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
+ orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+ orion_clkdev_add(NULL, "mv_crypto", crypto);
+ orion_clkdev_add(NULL, "dove-ac97", ac97);
+ orion_clkdev_add(NULL, "dove-pdma", pdma);
+ orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
+ orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
}
/*****************************************************************************
@@ -178,16 +234,16 @@ void __init dove_init_early(void)
orion_time_set_base(TIMER_VIRT_BASE);
}
-static int get_tclk(void)
+static int __init dove_find_tclk(void)
{
- /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
return 166666667;
}
static void __init dove_timer_init(void)
{
+ dove_tclk = dove_find_tclk();
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
- IRQ_DOVE_BRIDGE, get_tclk());
+ IRQ_DOVE_BRIDGE, dove_tclk);
}
struct sys_timer dove_timer = {
@@ -195,6 +251,15 @@ struct sys_timer dove_timer = {
};
/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init dove_crypto_init(void)
+{
+ orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
+ DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
+}
+
+/*****************************************************************************
* XOR 0
****************************************************************************/
void __init dove_xor0_init(void)
@@ -275,8 +340,8 @@ void __init dove_sdio1_init(void)
void __init dove_init(void)
{
- printk(KERN_INFO "Dove 88AP510 SoC, ");
- printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+ pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+ (dove_tclk + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
@@ -284,7 +349,7 @@ void __init dove_init(void)
dove_setup_cpu_mbus();
/* Setup root of clk tree */
- clk_init();
+ dove_clk_init();
/* internal devices that every board has */
dove_rtc_init();
@@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd)
while (1)
;
}
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+ OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+ OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+ OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+ NULL),
+ OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+ OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+ OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+ {},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+ pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+ (dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init();
+#endif
+ dove_setup_cpu_mbus();
+
+ /* Setup root of clk tree */
+ dove_clk_init();
+
+ /* Internal devices not ported to DT yet */
+ dove_rtc_init();
+ dove_xor0_init();
+ dove_xor1_init();
+
+ dove_ge00_init(&dove_dt_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_pcie_init(1, 1);
+ dove_crypto_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+ "marvell,dove",
+ NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+ .map_io = dove_map_io,
+ .init_early = dove_init_early,
+ .init_irq = orion_dt_init_irq,
+ .timer = &dove_timer,
+ .init_machine = dove_dt_init,
+ .restart = dove_restart,
+ .dt_compat = dove_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 6432a3b..1a23340 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -26,7 +26,11 @@ void dove_init_irq(void);
void dove_setup_cpu_mbus(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void dove_sata_init(struct mv_sata_platform_data *sata_data);
+#ifdef CONFIG_PCI
void dove_pcie_init(int init_port0, int init_port1);
+#else
+static inline void dove_pcie_init(int init_port0, int init_port1) { }
+#endif
void dove_ehci0_init(void);
void dove_ehci1_init(void);
void dove_uart0_init(void);
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index f953bb5..99f259e 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -13,22 +13,22 @@
#include <mach/dove.h>
-#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_CTRL_PCIE0_LINK 0x00000001
#define CPU_RESET 0x00000002
#define CPU_CTRL_PCIE1_LINK 0x00000008
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define FIQ_MASK_LOW_OFF 0x0008
@@ -47,9 +47,9 @@
#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
-#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c)
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index c91e300..661725e 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -25,7 +25,7 @@
*/
#define DOVE_CESA_PHYS_BASE 0xc8000000
-#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000)
#define DOVE_CESA_SIZE SZ_1M
#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
@@ -38,15 +38,15 @@
#define DOVE_BOOTROM_SIZE SZ_128M
#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000)
#define DOVE_SCRATCHPAD_SIZE SZ_1M
#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000)
#define DOVE_SB_REGS_SIZE SZ_8M
#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000)
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
@@ -62,75 +62,75 @@
*/
/* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600)
/* North-South Bridge */
-#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000)
/* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000)
/* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000)
/* USB */
-#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000)
/* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00)
/* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00)
/* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000)
/* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000)
/* CAFE */
-#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000)
/* SATA */
-#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000)
/* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000)
/* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000)
/* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -142,44 +142,44 @@
#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
-#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000)
#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
/* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500)
/* AC97 */
-#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000)
/* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000)
-#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
-#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
-#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034)
#define DOVE_SSP_ON_AU1 (1 << 0)
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
-#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000)
/* LCD Controller */
-#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000)
/* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000)
/* Video Engine */
-#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000)
#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index 3ad9f94..7bcd0df 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -13,24 +13,42 @@
#include <mach/irqs.h>
#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
-#define CLOCK_GATING_USB0_MASK (1 << 0)
-#define CLOCK_GATING_USB1_MASK (1 << 1)
-#define CLOCK_GATING_GBE_MASK (1 << 2)
-#define CLOCK_GATING_SATA_MASK (1 << 3)
-#define CLOCK_GATING_PCIE0_MASK (1 << 4)
-#define CLOCK_GATING_PCIE1_MASK (1 << 5)
-#define CLOCK_GATING_SDIO0_MASK (1 << 8)
-#define CLOCK_GATING_SDIO1_MASK (1 << 9)
-#define CLOCK_GATING_NAND_MASK (1 << 10)
-#define CLOCK_GATING_CAMERA_MASK (1 << 11)
-#define CLOCK_GATING_I2S0_MASK (1 << 12)
-#define CLOCK_GATING_I2S1_MASK (1 << 13)
-#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
-#define CLOCK_GATING_AC97_MASK (1 << 21)
-#define CLOCK_GATING_PDMA_MASK (1 << 22)
-#define CLOCK_GATING_XOR0_MASK (1 << 23)
-#define CLOCK_GATING_XOR1_MASK (1 << 24)
-#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
+#define CLOCK_GATING_BIT_USB0 0
+#define CLOCK_GATING_BIT_USB1 1
+#define CLOCK_GATING_BIT_GBE 2
+#define CLOCK_GATING_BIT_SATA 3
+#define CLOCK_GATING_BIT_PCIE0 4
+#define CLOCK_GATING_BIT_PCIE1 5
+#define CLOCK_GATING_BIT_SDIO0 8
+#define CLOCK_GATING_BIT_SDIO1 9
+#define CLOCK_GATING_BIT_NAND 10
+#define CLOCK_GATING_BIT_CAMERA 11
+#define CLOCK_GATING_BIT_I2S0 12
+#define CLOCK_GATING_BIT_I2S1 13
+#define CLOCK_GATING_BIT_CRYPTO 15
+#define CLOCK_GATING_BIT_AC97 21
+#define CLOCK_GATING_BIT_PDMA 22
+#define CLOCK_GATING_BIT_XOR0 23
+#define CLOCK_GATING_BIT_XOR1 24
+#define CLOCK_GATING_BIT_GIGA_PHY 30
+#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0)
+#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1)
+#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE)
+#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA)
+#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0)
+#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1)
+#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0)
+#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1)
+#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND)
+#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA)
+#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0)
+#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1)
+#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO)
+#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97)
+#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA)
+#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0)
+#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1)
+#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY)
#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 186357f..0877115 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -100,19 +100,19 @@ void __init dove_init_irq(void)
{
int i;
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-71.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
- orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
/*
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 355332d..bb15b26 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = {
.map_irq = dove_pcie_map_irq,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Dove PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk(KERN_INFO "link up\n");
pp->index = index;
pp->root_bus_nr = -1;
- pp->base = (void __iomem *)base;
+ pp->base = base;
spin_lock_init(&pp->conf_lock);
memset(&pp->res, 0, sizeof(pp->res));
} else {
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ca5c15a..50bca50 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -94,6 +94,13 @@ config MACH_TS219_DT
or MV6282. If you have the wrong one, the buttons will not
work.
+config MACH_DOCKSTAR_DT
+ bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent Dockstar (Flattened Device Tree).
+
config MACH_GOFLEXNET_DT
bool "Seagate GoFlex Net (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -109,6 +116,20 @@ config MACH_LSXL_DT
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
Flattened Device Tree.
+config MACH_IOMEGA_IX2_200_DT
+ bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+ bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 055c85a..294779f 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index e9a7180..8f0d162 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
/*
* Setup MBUS dram target info.
*/
- orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ (void __iomem *) DDR_WINDOW_CPU_BASE);
}
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 4ab3506..43d16d6 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,18 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
#include "common.h"
#include "mpp.h"
@@ -67,29 +57,6 @@ static unsigned int dnskw_mpp_config[] __initdata = {
0
};
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
- { 0, 0 },
- { 3000, 1 },
- { 6000, 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
- .num_ctrl = ARRAY_SIZE(dnskw_fan_pins),
- .ctrl = dnskw_fan_pins,
- .num_speed = ARRAY_SIZE(dnskw_fan_speed),
- .speed = dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
- .name = "gpio-fan",
- .id = -1,
- .dev = {
- .platform_data = &dnskw_fan_data,
- },
-};
-
static void dnskw_power_off(void)
{
gpio_set_value(36, 1);
@@ -114,8 +81,6 @@ void __init dnskw_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- platform_device_register(&dnskw_fan_device);
-
/* Register power-off GPIO. */
if (gpio_request(36, "dnskw:power:off") == 0
&& gpio_direction_output(36, 0) == 0)
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
new file mode 100644
index 0000000..f2fbb02
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED green */
+ MPP47_GPIO, /* LED orange */
+ 0
+};
+
+void __init dockstar_dt_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(dockstar_mpp_config);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&dockstar_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e4eb450..70c5a28 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
+ OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
{},
};
@@ -60,7 +61,6 @@ static void __init kirkwood_dt_init(void)
/* internal devices that every board has */
kirkwood_xor0_init();
kirkwood_xor1_init();
- kirkwood_crypto_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
@@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("qnap,ts219"))
qnap_dt_ts219_init();
+ if (of_machine_is_compatible("seagate,dockstar"))
+ dockstar_dt_init();
+
if (of_machine_is_compatible("seagate,goflexnet"))
goflexnet_init();
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
+ if (of_machine_is_compatible("iom,ix2-200"))
+ iomega_ix2_200_init();
+
+ if (of_machine_is_compatible("keymile,km_kirkwood"))
+ km_kirkwood_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table,
kirkwood_auxdata_lookup, NULL);
}
@@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = {
"iom,iconnect",
"raidsonic,ib-nas62x0",
"qnap,ts219",
+ "seagate,dockstar",
"seagate,goflexnet",
"buffalo,lsxl",
+ "iom,ix2-200",
+ "keymile,km_kirkwood",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d7a9198..d084b1e 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -16,11 +16,8 @@
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
@@ -44,57 +41,12 @@ static unsigned int iconnect_mpp_config[] __initdata = {
0
};
-static struct mtd_partition iconnect_nand_parts[] = {
- {
- .name = "flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices */
-static struct gpio_keys_button iconnect_buttons[] = {
- {
- .type = EV_SW,
- .code = SW_LID,
- .gpio = 12,
- .desc = "Reset Button",
- .active_low = 1,
- .debounce_interval = 100,
- }, {
- .type = EV_SW,
- .code = SW_TABLET_MODE,
- .gpio = 35,
- .desc = "OTB Button",
- .active_low = 1,
- .debounce_interval = 100,
- },
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
- .buttons = iconnect_buttons,
- .nbuttons = ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &iconnect_button_data,
- },
-};
-
void __init iconnect_init(void)
{
kirkwood_mpp_conf(iconnect_mpp_config);
- kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
-
- platform_device_register(&iconnect_button_device);
}
static int __init iconnect_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
new file mode 100644
index 0000000..158fb97
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
+ MPP12_GPIO, /* Reset Button */
+ MPP14_GPIO, /* Power Button */
+ MPP15_GPIO, /* Backup LED (blue) */
+ MPP16_GPIO, /* Power LED (white) */
+ MPP35_GPIO, /* OTB Button */
+ MPP36_GPIO, /* Rebuild LED (white) */
+ MPP37_GPIO, /* Health LED (red) */
+ MPP38_GPIO, /* SATA LED brightness control 1 */
+ MPP39_GPIO, /* SATA LED brightness control 2 */
+ MPP40_GPIO, /* Backup LED brightness control 1 */
+ MPP41_GPIO, /* Backup LED brightness control 2 */
+ MPP42_GPIO, /* Power LED brightness control 1 */
+ MPP43_GPIO, /* Power LED brightness control 2 */
+ MPP44_GPIO, /* Health LED brightness control 1 */
+ MPP45_GPIO, /* Health LED brightness control 2 */
+ MPP46_GPIO, /* Rebuild LED brightness control 1 */
+ MPP47_GPIO, /* Rebuild LED brightness control 2 */
+ 0
+};
+
+void __init iomega_ix2_200_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
new file mode 100644
index 0000000..f7d3283
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+ MPP8_GPIO, /* I2C SDA */
+ MPP9_GPIO, /* I2C SCL */
+ 0
+};
+
+void __init km_kirkwood_init(void)
+{
+ struct clk *sata_clk;
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+ /*
+ * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+ * SATA bits (14-15) of the Clock Gating Control Register. Since these
+ * devices are also not present in this variant, their clocks get
+ * disabled because unused when clk_disable_unused() gets called.
+ * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+ */
+ sata_clk = clk_get_sys("sata_mv.0", "0");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+ sata_clk = clk_get_sys("sata_mv.0", "1");
+ if (!IS_ERR(sata_clk))
+ sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5c38c94..3991077 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -42,7 +42,7 @@
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_REGS_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
.type = MT_DEVICE,
@@ -205,8 +205,7 @@ static struct clk *tclk;
static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
{
- return clk_register_gate(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock);
}
@@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
void (*fn_en)(void),
void (*fn_dis)(void))
{
- return clk_register_gate_fn(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock, fn_en, fn_dis);
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 304dd1a..bcffd7c 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -82,6 +82,12 @@ void ib62x0_init(void);
static inline void ib62x0_init(void) {};
#endif
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
#ifdef CONFIG_MACH_GOFLEXNET_DT
void goflexnet_init(void);
#else
@@ -94,6 +100,18 @@ void lsxl_init(void);
static inline void lsxl_init(void) {};
#endif
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index a115142..5c82b7d 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,37 +13,37 @@
#include <mach/kirkwood.h>
-#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
#define L2_WRITETHROUGH 0x00000010
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
#define CGC_BIT_GE0 (0)
#define CGC_BIT_PEX0 (2)
#define CGC_BIT_USB0 (3)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index af4f000..041653a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -45,7 +45,7 @@
#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -59,61 +59,61 @@
/*
* Register Map
*/
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
/*
* Supported devices and revisions.
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 20149a7..8847035 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -10,6 +10,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = {
void __init kirkwood_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-49.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 532d8ac..ec54491 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
void kirkwood_pcie_id(u32 *dev, u32 *rev)
{
kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE_VIRT_BASE);
}
struct pcie_port {
@@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = {
static void __init pcie0_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE_VIRT_BASE;
+ pp->base = PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
/*
@@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
static void __init pcie1_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+ pp->base = PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
/*
@@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = {
.map_irq = kirkwood_pcie_map_irq,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
printk(KERN_INFO "link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca26..367a940 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -20,6 +20,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
- orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+ orion_pcie_reset(PCIE_VIRT_BASE);
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 137e479..343c435 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -48,7 +48,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i
* so we don't need to take that into account here.
*/
- return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+ return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
}
/*
@@ -72,10 +72,10 @@ void __init mv78xx0_setup_cpu_mbus(void)
*/
if (mv78xx0_core_index() == 0)
orion_setup_cpu_mbus_target(&addr_map_cfg,
- DDR_WINDOW_CPU0_BASE);
+ (void __iomem *) DDR_WINDOW_CPU0_BASE);
else
orion_setup_cpu_mbus_target(&addr_map_cfg,
- DDR_WINDOW_CPU1_BASE);
+ (void __iomem *) DDR_WINDOW_CPU1_BASE);
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a6f3cd2..131cd48 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -130,12 +130,12 @@ static int get_tclk(void)
****************************************************************************/
static struct map_desc mv78xx0_io_desc[] __initdata = {
{
- .virtual = MV78XX0_CORE_REGS_VIRT_BASE,
+ .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
.pfn = 0,
.length = MV78XX0_CORE_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = MV78XX0_REGS_VIRT_BASE,
+ .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
.length = MV78XX0_REGS_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index eb187e0..5f03484 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -11,18 +11,18 @@
#include <mach/mv78xx0.h>
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_ERR_OFF 0x0000
#define IRQ_CAUSE_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0008
@@ -30,7 +30,7 @@
#define IRQ_MASK_LOW_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index bd03fed..46200a1 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -41,7 +41,7 @@
*/
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000)
#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
@@ -49,7 +49,7 @@
#define MV78XX0_PCIE_IO_SIZE SZ_1M
#define MV78XX0_REGS_PHYS_BASE 0xf1000000
-#define MV78XX0_REGS_VIRT_BASE 0xfd000000
+#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfd000000)
#define MV78XX0_REGS_SIZE SZ_1M
#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
@@ -64,47 +64,47 @@
/*
* Register Map
*/
-#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
-#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
-#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
-#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
-#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
-#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
-#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
-#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570)
+
+#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030)
+#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200)
+#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200)
+#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300)
+#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000)
/*
* Supported devices and revisions.
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 4d720f2..3207344 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -10,6 +10,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -24,16 +25,16 @@ static int __initdata gpio0_irqs[4] = {
void __init mv78xx0_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
- orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+ orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+ orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
mv78xx0_core_index() ? 0x18 : 0,
IRQ_MV78XX0_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 26a059b..a9a154a 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -34,8 +34,8 @@ static struct resource pcie_io_space;
void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
{
- *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE00_VIRT_BASE);
}
u32 pcie_port_size[8] = {
@@ -223,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = {
.map_irq = mv78xx0_pcie_map_irq,
};
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
{
printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk("link up\n");
@@ -235,7 +235,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
pp->maj = maj;
pp->min = min;
pp->root_bus_nr = -1;
- pp->base = (void __iomem *)base;
+ pp->base = base;
spin_lock_init(&pp->conf_lock);
memset(&pp->res, 0, sizeof(pp->res));
} else {
@@ -249,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1)
if (init_port0) {
add_pcie_port(0, 0, PCIE00_VIRT_BASE);
- if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+ if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
add_pcie_port(0, 1, PCIE01_VIRT_BASE);
add_pcie_port(0, 2, PCIE02_VIRT_BASE);
add_pcie_port(0, 3, PCIE03_VIRT_BASE);
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 7b27035..416d46e 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -6,6 +6,8 @@ config ARCH_MVEBU
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select PINCTRL
+ select PLAT_ORION
select SPARSE_IRQ
if ARCH_MVEBU
@@ -13,13 +15,25 @@ if ARCH_MVEBU
menu "Marvell SOC with device tree"
config MACH_ARMADA_370_XP
- bool "Marvell Armada 370 and Aramada XP boards"
+ bool
select ARMADA_370_XP_TIMER
select CPU_V7
+
+config MACH_ARMADA_370
+ bool "Marvell Armada 370 boards"
+ select MACH_ARMADA_370_XP
+ select PINCTRL_ARMADA_370
help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Armada 370 SoC with device tree.
- Say 'Y' here if you want your kernel to support boards based on
- Marvell Armada 370 or Armada XP with device tree.
+config MACH_ARMADA_XP
+ bool "Marvell Armada XP boards"
+ select MACH_ARMADA_370_XP
+ select PINCTRL_ARMADA_XP
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Armada XP SoC with device tree.
endmenu
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 6ea8998..57f996b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,4 +1,5 @@
-ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ -I$(srctree)/arch/arm/plat-orion/include
obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
new file mode 100644
index 0000000..fe454a4
--- /dev/null
+++ b/arch/arm/mach-mvebu/addr-map.c
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS 1
+#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D
+#define ARMADA_XP_TARGET_ETH1 3
+#define ARMADA_XP_TARGET_PCIE_0_2 4
+#define ARMADA_XP_TARGET_ETH0 7
+#define ARMADA_XP_TARGET_PCIE_1_3 8
+
+#define ARMADA_370_TARGET_DEV_BUS 1
+#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D
+#define ARMADA_370_TARGET_PCIE_0 4
+#define ARMADA_370_TARGET_PCIE_1 8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+ /*
+ * Window for the BootROM, needed for SMP on Armada XP
+ */
+ { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+ ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+ { .compatible = "marvell,armada-addr-decoding-controller" },
+ { /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+ unsigned int offset;
+
+ /* The register layout is a bit annoying and the below code
+ * tries to cope with it.
+ * - At offset 0x0, there are the registers for the first 8
+ * windows, with 4 registers of 32 bits per window (ctrl,
+ * base, remap low, remap high)
+ * - Then at offset 0x80, there is a hole of 0x10 bytes for
+ * the internal registers base address and internal units
+ * sync barrier register.
+ * - Then at offset 0x90, there the registers for 12
+ * windows, with only 2 registers of 32 bits per window
+ * (ctrl, base).
+ */
+ if (win < 8)
+ offset = (win << 4);
+ else
+ offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+ return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 20,
+ .remappable_wins = 8,
+ .win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+ struct device_node *np;
+ void __iomem *mbus_unit_addr_decoding_base;
+ void __iomem *sdram_addr_decoding_base;
+
+ np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+ if (!np)
+ return -ENODEV;
+
+ mbus_unit_addr_decoding_base = of_iomap(np, 0);
+ BUG_ON(!mbus_unit_addr_decoding_base);
+
+ sdram_addr_decoding_base =
+ mbus_unit_addr_decoding_base +
+ ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+ addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+ /*
+ * Disable, clear and configure windows.
+ */
+ if (of_machine_is_compatible("marvell,armadaxp"))
+ orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+ else if (of_machine_is_compatible("marvell,armada370"))
+ orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+ else {
+ pr_err("Unsupported SoC\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ sdram_addr_decoding_base);
+ return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index b46418a..49d7915 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -25,7 +25,7 @@
static struct map_desc armada_370_xp_io_desc[] __initdata = {
{
- .virtual = ARMADA_370_XP_REGS_VIRT_BASE,
+ .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
.length = ARMADA_370_XP_REGS_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 25f0ca8..aac9beb 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,7 +16,7 @@
#define __MACH_ARMADA_370_XP_H
#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000)
#define ARMADA_370_XP_REGS_SIZE SZ_1M
#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 0cc54dd..726c02c 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -357,6 +357,33 @@ static inline void omap_init_uwire(void) {}
#endif
+#define OMAP1_RNG_BASE 0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+ {
+ .start = OMAP1_RNG_BASE,
+ .end = OMAP1_RNG_BASE + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap1_rng_device = {
+ .name = "omap_rng",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap1_rng_resources),
+ .resource = omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+ if (!cpu_is_omap16xx())
+ return;
+
+ (void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
@@ -395,6 +422,7 @@ static int __init omap1_init_devices(void)
omap_init_spi100k();
omap_init_sti();
omap_init_uwire();
+ omap1_init_rng();
return 0;
}
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index aa81593..cdeb9d3 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -141,7 +141,7 @@ static int __init omap1_dm_timer_init(void)
pdata->set_timer_src = omap1_dm_timer_set_src;
pdata->timer_capability = OMAP_TIMER_ALWON |
- OMAP_TIMER_NEEDS_RESET;
+ OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 7d6abda..fe40d9e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -179,6 +179,7 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
+obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 3e2d76f..cea3aba 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -202,7 +202,7 @@ static inline void __init apollon_init_smc91x(void)
return;
}
- clk_enable(gpmc_fck);
+ clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
eth_cs = APOLLON_ETH_CS;
@@ -246,7 +246,7 @@ static inline void __init apollon_init_smc91x(void)
gpmc_cs_free(APOLLON_ETH_CS);
}
out:
- clk_disable(gpmc_fck);
+ clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index f6c48dd..8d04bf8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -265,9 +265,9 @@ static inline void __init h4_init_debug(void)
return;
}
- clk_enable(gpmc_fck);
+ clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
- clk_disable(gpmc_fck);
+ clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
if (is_gpmc_muxed())
@@ -311,7 +311,7 @@ static inline void __init h4_init_debug(void)
gpmc_cs_free(eth_cs);
out:
- clk_disable(gpmc_fck);
+ clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
}
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e0dd70b..2b012f9 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -171,7 +171,7 @@ static void __init omap4_ehci_init(void)
return;
}
clk_set_rate(phy_ref_clk, 19200000);
- clk_enable(phy_ref_clk);
+ clk_prepare_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init and reset phy+hub */
ret = gpio_request_array(panda_ehci_gpios,
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index b19a1f7..c2d1521 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
- OMAP24XX_CM_IDLEST_VAL, clk->name);
+ OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index cabcfdb..3524f0e7 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
- long highest_rate;
+ long highest_rate, sys_clk_rate;
highest_rate = -EINVAL;
+ sys_clk_rate = __clk_get_rate(sclk);
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sclk->rate)
+ if (ptr->xtal_speed != sys_clk_rate)
continue;
highest_rate = ptr->mpu_speed;
@@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
+ long sys_clk_rate;
+
+ sys_clk_rate = __clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sclk->rate)
+ if (prcm->xtal_speed != sys_clk_rate)
continue;
if (prcm->mpu_speed <= rate) {
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 298887b..7c6da2f 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
struct omap_sdrc_params *sdrc_cs0;
struct omap_sdrc_params *sdrc_cs1;
int ret;
+ unsigned long clkrate;
if (!clk || !rate)
return -EINVAL;
@@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (validrate != rate)
return -EINVAL;
- sdrcrate = sdrc_ick_p->rate;
- if (rate > clk->rate)
- sdrcrate <<= ((rate / clk->rate) >> 1);
+ sdrcrate = __clk_get_rate(sdrc_ick_p);
+ clkrate = __clk_get_rate(clk);
+ if (rate > clkrate)
+ sdrcrate <<= ((rate / clkrate) >> 1);
else
- sdrcrate >>= ((clk->rate / rate) >> 1);
+ sdrcrate >>= ((clkrate / rate) >> 1);
ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
if (ret)
@@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
/*
* XXX This only needs to be done when the CPU frequency changes
*/
- _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+ _mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
c += 1; /* for safety */
c *= SDRC_MPURATE_LOOPS;
@@ -90,8 +92,8 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (c == 0)
c = 1;
- pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
+ clkrate, validrate);
pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
@@ -102,14 +104,14 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (sdrc_cs1)
omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
+ new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
else
omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
+ new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 19a9809..eaed390 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -72,7 +72,7 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
if (!clks->parent) {
/* This indicates a data problem */
WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
- clk->name, src_clk->name);
+ __clk_get_name(clk), __clk_get_name(src_clk));
return NULL;
}
@@ -127,7 +127,8 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
if (max_div == 0) {
/* This indicates an error in the clksel data */
WARN(1, "clock: %s: could not find divisor for parent %s\n",
- clk->name, src_clk->parent->name);
+ __clk_get_name(clk),
+ __clk_get_name(__clk_get_parent(src_clk)));
return 0;
}
@@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
+ struct clk *parent;
- clks = _get_clksel_by_parent(clk, clk->parent);
+ parent = __clk_get_parent(clk);
+ clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return 0;
@@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
if (!clkr->div) {
/* This indicates a data error */
- WARN(1, "clock: %s: could not find fieldval %d parent %s\n",
- clk->name, field_val, clk->parent->name);
+ WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
+ __clk_get_name(clk), field_val, __clk_get_name(parent));
return 0;
}
@@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
+ struct clk *parent;
/* should never happen */
WARN_ON(div == 0);
- clks = _get_clksel_by_parent(clk, clk->parent);
+ parent = __clk_get_parent(clk);
+ clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
}
if (!clkr->div) {
- pr_err("clock: %s: could not find divisor %d parent %s\n",
- clk->name, div, clk->parent->name);
+ pr_err("clock: %s: could not find divisor %d for parent %s\n",
+ __clk_get_name(clk), div, __clk_get_name(parent));
return ~0;
}
@@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 last_div = 0;
+ struct clk *parent;
+ unsigned long parent_rate;
+ const char *clk_name;
+
+ parent = __clk_get_parent(clk);
+ parent_rate = __clk_get_rate(parent);
+ clk_name = __clk_get_name(clk);
if (!clk->clksel || !clk->clksel_mask)
return ~0;
pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
+ clk_name, target_rate);
*new_div = 1;
- clks = _get_clksel_by_parent(clk, clk->parent);
+ clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@@ -300,29 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
/* Sanity check */
if (clkr->div <= last_div)
- pr_err("clock: %s: clksel_rate table not sorted",
- clk->name);
+ pr_err("clock: %s: clksel_rate table not sorted\n",
+ clk_name);
last_div = clkr->div;
- test_rate = clk->parent->rate / clkr->div;
+ test_rate = parent_rate / clkr->div;
if (test_rate <= target_rate)
break; /* found it */
}
if (!clkr->div) {
- pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n",
- clk->name, target_rate, clk->parent->name);
+ pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
+ clk_name, target_rate, __clk_get_name(parent));
return ~0;
}
*new_div = clkr->div;
pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
+ (parent_rate / clkr->div));
- return clk->parent->rate / clkr->div;
+ return parent_rate / clkr->div;
}
/*
@@ -344,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk)
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 r, found = 0;
+ struct clk *parent;
+ const char *clk_name;
if (!clk->clksel || !clk->clksel_mask)
return;
+ parent = __clk_get_parent(clk);
+ clk_name = __clk_get_name(clk);
+
r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
r >>= __ffs(clk->clksel_mask);
@@ -357,11 +374,13 @@ void omap2_init_clksel_parent(struct clk *clk)
continue;
if (clkr->val == r) {
- if (clk->parent != clks->parent) {
+ if (parent != clks->parent) {
pr_debug("clock: %s: inited parent to %s (was %s)\n",
- clk->name, clks->parent->name,
- ((clk->parent) ?
- clk->parent->name : "NULL"));
+ clk_name,
+ __clk_get_name(clks->parent),
+ ((parent) ?
+ __clk_get_name(parent) :
+ "NULL"));
clk_reparent(clk, clks->parent);
};
found = 1;
@@ -371,7 +390,7 @@ void omap2_init_clksel_parent(struct clk *clk)
/* This indicates a data error */
WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
- clk->name, r);
+ clk_name, r);
return;
}
@@ -389,15 +408,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
{
unsigned long rate;
u32 div = 0;
+ struct clk *parent;
div = _read_divisor(clk);
if (div == 0)
- return clk->rate;
+ return __clk_get_rate(clk);
- rate = clk->parent->rate / div;
+ parent = __clk_get_parent(clk);
+ rate = __clk_get_rate(parent) / div;
- pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
- rate, div);
+ pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
+ __clk_get_name(clk), rate, div);
return rate;
}
@@ -452,9 +473,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
_write_clksel_reg(clk, field_val);
- clk->rate = clk->parent->rate / new_div;
+ clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
- pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+ pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
+ __clk_get_rate(clk));
return 0;
}
@@ -496,13 +518,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
clk_reparent(clk, new_parent);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
- clk->rate = new_parent->rate;
+ clk->rate = __clk_get_rate(new_parent);
if (parent_div > 0)
- clk->rate /= parent_div;
+ __clk_get_rate(clk) /= parent_div;
pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
- clk->name, clk->parent->name, clk->rate);
+ __clk_get_name(clk),
+ __clk_get_name(__clk_get_parent(clk)),
+ __clk_get_rate(clk));
return 0;
}
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 83b658b..8041114 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
- fint = clk->parent->rate / n;
+ fint = __clk_get_rate(__clk_get_parent(clk)) / n;
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
@@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk)
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return dd->clk_bypass->rate;
+ return __clk_get_rate(dd->clk_bypass);
} else if (cpu_is_omap34xx()) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return dd->clk_bypass->rate;
+ return __clk_get_rate(dd->clk_bypass);
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return dd->clk_bypass->rate;
+ return __clk_get_rate(dd->clk_bypass);
}
v = __raw_readl(dd->mult_div1_reg);
@@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
- dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+ dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
return dpll_clk;
@@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
struct dpll_data *dd;
+ unsigned long ref_rate;
+ const char *clk_name;
if (!clk || !clk->dpll_data)
return ~0;
dd = clk->dpll_data;
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(clk);
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
- clk->name, target_rate);
+ clk_name, target_rate);
- scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
dd->last_rounded_rate = 0;
@@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
break;
r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- dd->clk_ref->rate);
+ ref_rate);
/* m can't be set low enough for this n - try with a larger n */
if (r == DPLL_MULT_UNDERFLOW)
continue;
pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
- clk->name, m, n, new_rate);
+ clk_name, m, n, new_rate);
if (target_rate == new_rate) {
dd->last_rounded_m = m;
@@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
}
if (target_rate != new_rate) {
- pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
- target_rate);
+ pr_debug("clock: %s: cannot round to rate %ld\n",
+ clk_name, target_rate);
return ~0;
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e97f98f..961ac8f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -78,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk)
clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
- clk->name);
+ __clk_get_name(clk));
}
/* Public functions */
@@ -94,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk)
void omap2_init_clk_clkdm(struct clk *clk)
{
struct clockdomain *clkdm;
+ const char *clk_name;
if (!clk->clkdm_name)
return;
+ clk_name = __clk_get_name(clk);
+
clkdm = clkdm_lookup(clk->clkdm_name);
if (clkdm) {
pr_debug("clock: associated clk %s to clkdm %s\n",
- clk->name, clk->clkdm_name);
+ clk_name, clk->clkdm_name);
clk->clkdm = clkdm;
} else {
pr_debug("clock: could not associate clk %s to clkdm %s\n",
- clk->name, clk->clkdm_name);
+ clk_name, clk->clkdm_name);
}
}
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 12c178d..c3cde1a 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1804,6 +1804,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gfx_ick", &gfx_ick, CK_242X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_242X),
+ CLK(NULL, "dss_ick", &dss_ick, CK_242X),
CLK(NULL, "dss1_fck", &dss1_fck, CK_242X),
CLK(NULL, "dss2_fck", &dss2_fck, CK_242X),
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X),
@@ -1843,12 +1844,16 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X),
CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X),
+ CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X),
CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X),
CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_242X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_242X),
@@ -1859,12 +1864,15 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_242X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
+ CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X),
CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
CLK("omap24xxcam", "fck", &cam_fck, CK_242X),
+ CLK(NULL, "cam_fck", &cam_fck, CK_242X),
CLK("omap24xxcam", "ick", &cam_ick, CK_242X),
+ CLK(NULL, "cam_ick", &cam_ick, CK_242X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X),
@@ -1873,16 +1881,22 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "mspro_ick", &mspro_ick, CK_242X),
CLK(NULL, "mspro_fck", &mspro_fck, CK_242X),
CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
+ CLK(NULL, "mmc_ick", &mmc_ick, CK_242X),
CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
+ CLK(NULL, "mmc_fck", &mmc_fck, CK_242X),
CLK(NULL, "fac_ick", &fac_ick, CK_242X),
CLK(NULL, "fac_fck", &fac_fck, CK_242X),
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
+ CLK(NULL, "hdq_ick", &hdq_ick, CK_242X),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X),
+ CLK(NULL, "hdq_fck", &hdq_fck, CK_242X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X),
+ CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X),
CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X),
+ CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X),
CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
@@ -1892,14 +1906,18 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
CLK(NULL, "des_ick", &des_ick, CK_242X),
CLK("omap-sham", "ick", &sha_ick, CK_242X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_242X),
+ CLK(NULL, "rng_ick", &rng_ick, CK_242X),
CLK("omap-aes", "ick", &aes_ick, CK_242X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
- CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
- CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
- CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
+ CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X),
+ CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X),
+ CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X),
+ CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 7ea9139..22404fe 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1888,6 +1888,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_243X),
+ CLK(NULL, "dss_ick", &dss_ick, CK_243X),
CLK(NULL, "dss1_fck", &dss1_fck, CK_243X),
CLK(NULL, "dss2_fck", &dss2_fck, CK_243X),
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X),
@@ -1927,20 +1928,28 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X),
CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X),
+ CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
+ CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X),
CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
+ CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X),
CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
+ CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X),
CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X),
CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X),
CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
+ CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X),
CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_243X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_243X),
@@ -1951,13 +1960,16 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_243X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
+ CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X),
CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
CLK("omap24xxcam", "fck", &cam_fck, CK_243X),
+ CLK(NULL, "cam_fck", &cam_fck, CK_243X),
CLK("omap24xxcam", "ick", &cam_ick, CK_243X),
+ CLK(NULL, "cam_ick", &cam_ick, CK_243X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X),
@@ -1966,10 +1978,14 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "fac_ick", &fac_ick, CK_243X),
CLK(NULL, "fac_fck", &fac_fck, CK_243X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
+ CLK(NULL, "hdq_ick", &hdq_ick, CK_243X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
+ CLK(NULL, "hdq_fck", &hdq_fck, CK_243X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X),
+ CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X),
CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X),
+ CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X),
CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
@@ -1978,22 +1994,29 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "des_ick", &des_ick, CK_243X),
CLK("omap-sham", "ick", &sha_ick, CK_243X),
CLK("omap_rng", "ick", &rng_ick, CK_243X),
+ CLK(NULL, "rng_ick", &rng_ick, CK_243X),
CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
+ CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X),
+ CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X),
CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X),
CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X),
+ CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X),
CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
+ CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X),
CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
+ CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 2026311..b87b88c 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1013,6 +1013,7 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX),
CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX),
+ CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 15cdc647..83bb014 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -63,15 +63,15 @@ void __init omap3_clk_lock_dpll5(void)
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_enable(dpll5_clk);
+ clk_prepare_enable(dpll5_clk);
/* Program dpll5_m2_clk divider for no division */
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_enable(dpll5_m2_clk);
+ clk_prepare_enable(dpll5_m2_clk);
clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_disable(dpll5_m2_clk);
- clk_disable(dpll5_clk);
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
return;
}
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 700317a..1f42c9d 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3215,7 +3215,6 @@ static struct clk dummy_apb_pclk = {
* clkdev
*/
-/* XXX At some point we should rename this file to clock3xxx_data.c */
static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX),
CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX),
@@ -3243,11 +3242,13 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX),
CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+ CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX),
CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX),
CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+ CLK(NULL, "omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX),
CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX),
CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX),
CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX),
@@ -3263,6 +3264,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX),
CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+ CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
@@ -3272,6 +3274,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX),
CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX),
CLK(NULL, "arm_fck", &arm_fck, CK_3XXX),
+ CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX),
CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX),
@@ -3295,6 +3298,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX),
@@ -3315,6 +3319,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
+ CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
@@ -3322,6 +3327,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
@@ -3329,28 +3336,42 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX),
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX),
CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX),
CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX),
CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX),
CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX),
CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
+ CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX),
+ CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX),
CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX),
+ CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX),
CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX),
+ CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX),
+ CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX),
+ CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX),
+ CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX),
CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX),
+ CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX),
+ CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX),
+ CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX),
CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX),
CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX),
CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX),
CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX),
+ CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX),
+ CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX),
CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX),
@@ -3369,7 +3390,9 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX),
CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX),
CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1),
+ CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1),
CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX),
CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX),
@@ -3385,6 +3408,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
@@ -3394,6 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX),
CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX),
CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
+ CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX),
CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX),
CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
@@ -3439,9 +3465,13 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX),
+ CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX),
+ CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX),
+ CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX),
CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX),
CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX),
+ CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX),
CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX),
CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX),
CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX),
@@ -3457,8 +3487,12 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
+ CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX),
+ CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX),
CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX),
CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX),
+ CLK(NULL, "vpfe_ick", &emac_ick, CK_AM35XX),
+ CLK(NULL, "vpfe_fck", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX),
@@ -3467,6 +3501,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX),
+ CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX),
};
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 500682c..d661d13 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3156,6 +3156,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
+ CLK(NULL, "dss_fck", &dss_fck, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
@@ -3212,6 +3213,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X),
CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X),
+ CLK(NULL, "rng_ick", &rng_ick, CK_443X),
CLK("omap_rng", "ick", &rng_ick, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X),
@@ -3243,6 +3245,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
CLK(NULL, "uart4_fck", &uart4_fck, CK_443X),
CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X),
+ CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X),
CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X),
CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X),
CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X),
@@ -3253,15 +3256,19 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X),
+ CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X),
CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X),
CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
+ CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X),
CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X),
+ CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X),
CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
+ CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
CLK(NULL, "usim_ck", &usim_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "usim_fck", &usim_fck, CK_443X),
@@ -3312,8 +3319,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "uart4_ick", &dummy_ck, CK_443X),
CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X),
+ CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X),
+ /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X),
@@ -3325,6 +3334,18 @@ static struct omap_clk omap44xx_clks[] = {
CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index a155562..cbb8791 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -899,6 +899,23 @@ bool clkdm_in_hwsup(struct clockdomain *clkdm)
return ret;
}
+/**
+ * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm has the
+ * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
+ * null. More information is available in the documentation for the
+ * CLKDM_MISSING_IDLE_REPORTING macro.
+ */
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
+{
+ if (!clkdm)
+ return false;
+
+ return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
+}
+
/* Clockdomain-to-clock/hwmod framework interface code */
static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 5601dc1..629576b 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -1,9 +1,7 @@
/*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
* OMAP2/3 clockdomain framework functions
*
- * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008, 2012 Texas Instruments, Inc.
* Copyright (C) 2008-2011 Nokia Corporation
*
* Paul Walmsley
@@ -34,6 +32,20 @@
* CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
* active whenever the MPU is active. True for interconnects and
* the WKUP clockdomains.
+ * CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and
+ * clocks inside this clockdomain are not taken into account by
+ * the PRCM when determining whether the clockdomain is idle.
+ * Without this flag, if the clockdomain is set to
+ * hardware-supervised idle mode, the PRCM may transition the
+ * enclosing powerdomain to a low power state, even when devices
+ * inside the clockdomain and powerdomain are in use. (An example
+ * of such a clockdomain is the EMU clockdomain on OMAP3/4.) If
+ * this flag is set, and the clockdomain does not support the
+ * force-sleep mode, then the HW_AUTO mode will be used to put the
+ * clockdomain to sleep. Similarly, if the clockdomain supports
+ * the force-wakeup mode, then it will be used whenever a clock or
+ * IP block inside the clockdomain is active, rather than the
+ * HW_AUTO mode.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
@@ -41,6 +53,7 @@
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
+#define CLKDM_MISSING_IDLE_REPORTING (1 << 6)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -187,6 +200,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
void clkdm_allow_idle(struct clockdomain *clkdm);
void clkdm_deny_idle(struct clockdomain *clkdm);
bool clkdm_in_hwsup(struct clockdomain *clkdm);
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
int clkdm_wakeup(struct clockdomain *clkdm);
int clkdm_sleep(struct clockdomain *clkdm);
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f99e65c..9a7792a 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -162,6 +162,19 @@ static void _disable_hwsup(struct clockdomain *clkdm)
clkdm->clktrctrl_mask);
}
+static int omap3_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
+
+static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
{
@@ -170,6 +183,17 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ _enable_hwsup(clkdm);
+ return 0;
+ }
+
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@@ -193,6 +217,17 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+ (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ omap3_clkdm_wakeup(clkdm);
+ return 0;
+ }
+
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@@ -209,20 +244,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
return 0;
}
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 762f2cc..6fc6155 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -113,6 +113,17 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->prcm_partition)
return 0;
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap4_clkdm_allow_idle(clkdm);
+ return 0;
+ }
+
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 56089c4..933a35c 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -387,14 +387,11 @@ static struct clockdomain per_am35x_clkdm = {
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
};
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
static struct clockdomain emu_clkdm = {
.name = "emu_clkdm",
.pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP |
+ CLKDM_MISSING_IDLE_REPORTING),
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
};
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 63d60a7..b56d06b 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -390,7 +390,8 @@ static struct clockdomain emu_sys_44xx_clkdm = {
.prcm_partition = OMAP4430_PRM_PARTITION,
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
- .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
+ .flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP |
+ CLKDM_MISSING_IDLE_REPORTING),
};
static struct clockdomain l3_dma_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index 532027e..adf7bb7 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -25,263 +25,328 @@
* CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
*/
#define AM33XX_AUTO_DPLL_MODE_SHIFT 0
+#define AM33XX_AUTO_DPLL_MODE_WIDTH 3
#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11)
/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_CPSW_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH 1
#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2)
/* Used by CM_GFX_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9)
/* Used by CM_GFX_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6)
/* Used by CM_PER_L3S_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4FW_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8)
/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
/* Used by CM_RTC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8)
/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17)
/* Used by CM_PER_LCDC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4)
/* Used by CM_PER_LCDC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3)
/* Used by CM_MPU_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2
+#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2)
/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4)
/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5)
/* Used by CM_RTC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4)
/* Used by CLKSEL_GFX_FCLK */
#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH 1
#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2DIV_SHIFT 3
-#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3)
+#define AM33XX_CLKOUT2DIV_WIDTH 3
+#define AM33XX_CLKOUT2DIV_MASK (0x7 << 3)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2EN_SHIFT 7
+#define AM33XX_CLKOUT2EN_WIDTH 1
#define AM33XX_CLKOUT2EN_MASK (1 << 7)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2SOURCE_SHIFT 0
-#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0)
+#define AM33XX_CLKOUT2SOURCE_WIDTH 3
+#define AM33XX_CLKOUT2SOURCE_MASK (0x7 << 0)
/*
* Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
@@ -289,6 +354,7 @@
* CLKSEL_TIMER7_CLK
*/
#define AM33XX_CLKSEL_SHIFT 0
+#define AM33XX_CLKSEL_WIDTH 1
#define AM33XX_CLKSEL_MASK (0x01 << 0)
/*
@@ -296,17 +362,21 @@
* CM_CPTS_RFT_CLKSEL
*/
#define AM33XX_CLKSEL_0_0_SHIFT 0
+#define AM33XX_CLKSEL_0_0_WIDTH 1
#define AM33XX_CLKSEL_0_0_MASK (1 << 0)
#define AM33XX_CLKSEL_0_1_SHIFT 0
+#define AM33XX_CLKSEL_0_1_WIDTH 2
#define AM33XX_CLKSEL_0_1_MASK (3 << 0)
/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
#define AM33XX_CLKSEL_0_2_SHIFT 0
+#define AM33XX_CLKSEL_0_2_WIDTH 3
#define AM33XX_CLKSEL_0_2_MASK (7 << 0)
/* Used by CLKSEL_GFX_FCLK */
#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1
+#define AM33XX_CLKSEL_GFX_FCLK_WIDTH 1
#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1)
/*
@@ -318,6 +388,7 @@
* CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
*/
#define AM33XX_CLKTRCTRL_SHIFT 0
+#define AM33XX_CLKTRCTRL_WIDTH 2
#define AM33XX_CLKTRCTRL_MASK (0x3 << 0)
/*
@@ -326,34 +397,42 @@
* CM_SSC_DELTAMSTEP_DPLL_PER
*/
#define AM33XX_DELTAMSTEP_SHIFT 0
-#define AM33XX_DELTAMSTEP_MASK (0x19 << 0)
+#define AM33XX_DELTAMSTEP_WIDTH 20
+#define AM33XX_DELTAMSTEP_MASK (0xfffff << 0)
/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23
+#define AM33XX_DPLL_BYP_CLKSEL_WIDTH 1
#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH 1
#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH 1
#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0
+#define AM33XX_DPLL_CLKOUT_DIV_WIDTH 5
#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0)
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH 7
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0)
/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH 1
#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH 1
#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7)
/*
@@ -361,6 +440,7 @@
* CM_DIV_M2_DPLL_PER
*/
#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH 1
#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
/*
@@ -368,19 +448,22 @@
* CM_CLKSEL_DPLL_MPU
*/
#define AM33XX_DPLL_DIV_SHIFT 0
+#define AM33XX_DPLL_DIV_WIDTH 7
#define AM33XX_DPLL_DIV_MASK (0x7f << 0)
#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0)
/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_DIV_0_7_SHIFT 0
-#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0)
+#define AM33XX_DPLL_DIV_0_7_WIDTH 8
+#define AM33XX_DPLL_DIV_0_7_MASK (0xff << 0)
/*
* Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH 1
#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
/*
@@ -388,6 +471,7 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_EN_SHIFT 0
+#define AM33XX_DPLL_EN_WIDTH 3
#define AM33XX_DPLL_EN_MASK (0x7 << 0)
/*
@@ -395,6 +479,7 @@
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_LPMODE_EN_SHIFT 10
+#define AM33XX_DPLL_LPMODE_EN_WIDTH 1
#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10)
/*
@@ -402,10 +487,12 @@
* CM_CLKSEL_DPLL_MPU
*/
#define AM33XX_DPLL_MULT_SHIFT 8
+#define AM33XX_DPLL_MULT_WIDTH 11
#define AM33XX_DPLL_MULT_MASK (0x7ff << 8)
/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8
+#define AM33XX_DPLL_MULT_PERIPH_WIDTH 12
#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8)
/*
@@ -413,17 +500,20 @@
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_REGM4XEN_SHIFT 11
+#define AM33XX_DPLL_REGM4XEN_WIDTH 1
#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11)
/* Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_SD_DIV_SHIFT 24
-#define AM33XX_DPLL_SD_DIV_MASK (24, 31)
+#define AM33XX_DPLL_SD_DIV_WIDTH 8
+#define AM33XX_DPLL_SD_DIV_MASK (0xff << 24)
/*
* Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_ACK_SHIFT 13
+#define AM33XX_DPLL_SSC_ACK_WIDTH 1
#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13)
/*
@@ -431,6 +521,7 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH 1
#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
/*
@@ -438,54 +529,67 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_EN_SHIFT 12
+#define AM33XX_DPLL_SSC_EN_WIDTH 1
#define AM33XX_DPLL_SSC_EN_MASK (1 << 12)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH 5
#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH 5
#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
-#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0)
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH 5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
/*
@@ -522,11 +626,12 @@
* CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
*/
#define AM33XX_IDLEST_SHIFT 16
+#define AM33XX_IDLEST_WIDTH 2
#define AM33XX_IDLEST_MASK (0x3 << 16)
-#define AM33XX_IDLEST_VAL 0x3
/* Used by CM_MAC_CLKSEL */
#define AM33XX_MII_CLK_SEL_SHIFT 2
+#define AM33XX_MII_CLK_SEL_WIDTH 1
#define AM33XX_MII_CLK_SEL_MASK (1 << 2)
/*
@@ -535,7 +640,8 @@
* CM_SSC_MODFREQDIV_DPLL_PER
*/
#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8
-#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8)
+#define AM33XX_MODFREQDIV_EXPONENT_WIDTH 3
+#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x7 << 8)
/*
* Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
@@ -543,7 +649,8 @@
* CM_SSC_MODFREQDIV_DPLL_PER
*/
#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0
-#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0)
+#define AM33XX_MODFREQDIV_MANTISSA_WIDTH 7
+#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x7f << 0)
/*
* Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
@@ -580,42 +687,52 @@
* CM_CEFUSE_CEFUSE_CLKCTRL
*/
#define AM33XX_MODULEMODE_SHIFT 0
+#define AM33XX_MODULEMODE_WIDTH 2
#define AM33XX_MODULEMODE_MASK (0x3 << 0)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30
+#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH 1
#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19)
/* Used by CM_WKUP_GPIO0_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO1_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO2_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO3_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO4_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO5_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO6_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18)
/*
@@ -627,25 +744,30 @@
* CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
*/
#define AM33XX_STBYST_SHIFT 18
+#define AM33XX_STBYST_WIDTH 1
#define AM33XX_STBYST_MASK (1 << 18)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27
-#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27)
+#define AM33XX_STM_PMD_CLKDIVSEL_WIDTH 3
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x7 << 27)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_STM_PMD_CLKSEL_SHIFT 22
-#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22)
+#define AM33XX_STM_PMD_CLKSEL_WIDTH 2
+#define AM33XX_STM_PMD_CLKSEL_MASK (0x3 << 22)
/*
* Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
* CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
*/
#define AM33XX_ST_DPLL_CLK_SHIFT 0
+#define AM33XX_ST_DPLL_CLK_WIDTH 1
#define AM33XX_ST_DPLL_CLK_MASK (1 << 0)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8
+#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH 1
#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8)
/*
@@ -653,18 +775,22 @@
* CM_DIV_M2_DPLL_PER
*/
#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9
+#define AM33XX_ST_DPLL_CLKOUT_WIDTH 1
#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
/*
@@ -672,16 +798,20 @@
* CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
*/
#define AM33XX_ST_MN_BYPASS_SHIFT 8
+#define AM33XX_ST_MN_BYPASS_WIDTH 1
#define AM33XX_ST_MN_BYPASS_MASK (1 << 8)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24
-#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24)
+#define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH 3
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x7 << 24)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20
-#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20)
+#define AM33XX_TRC_PMD_CLKSEL_WIDTH 2
+#define AM33XX_TRC_PMD_CLKSEL_MASK (0x3 << 20)
/* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_WIDTH 2
#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4)
#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 975f6bd..59598ff 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -218,6 +218,8 @@
#define OMAP3430_ST_MAILBOXES_MASK (1 << 7)
#define OMAP3430_ST_OMAPCTRL_SHIFT 6
#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6)
+#define OMAP3430_ST_SAD2D_SHIFT 3
+#define OMAP3430_ST_SAD2D_MASK (1 << 3)
#define OMAP3430_ST_SDMA_SHIFT 2
#define OMAP3430_ST_SDMA_MASK (1 << 2)
#define OMAP3430_ST_SDRC_SHIFT 1
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 65597a7..4c6c2f7 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -1,7 +1,7 @@
/*
* OMAP44xx Clock Management register bits
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
@@ -24,6 +24,7 @@
/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
#define OMAP4430_ABE_DYNDEP_SHIFT 3
+#define OMAP4430_ABE_DYNDEP_WIDTH 0x1
#define OMAP4430_ABE_DYNDEP_MASK (1 << 3)
/*
@@ -31,14 +32,17 @@
* CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_ABE_STATDEP_SHIFT 3
+#define OMAP4430_ABE_STATDEP_WIDTH 0x1
#define OMAP4430_ABE_STATDEP_MASK (1 << 3)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4430_ALWONCORE_DYNDEP_SHIFT 16
+#define OMAP4430_ALWONCORE_DYNDEP_WIDTH 0x1
#define OMAP4430_ALWONCORE_DYNDEP_MASK (1 << 16)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
#define OMAP4430_ALWONCORE_STATDEP_SHIFT 16
+#define OMAP4430_ALWONCORE_STATDEP_WIDTH 0x1
#define OMAP4430_ALWONCORE_STATDEP_MASK (1 << 16)
/*
@@ -47,294 +51,367 @@
* CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
*/
#define OMAP4430_AUTO_DPLL_MODE_SHIFT 0
+#define OMAP4430_AUTO_DPLL_MODE_WIDTH 0x3
#define OMAP4430_AUTO_DPLL_MODE_MASK (0x7 << 0)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4430_CEFUSE_DYNDEP_SHIFT 17
+#define OMAP4430_CEFUSE_DYNDEP_WIDTH 0x1
#define OMAP4430_CEFUSE_DYNDEP_MASK (1 << 17)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
#define OMAP4430_CEFUSE_STATDEP_SHIFT 17
+#define OMAP4430_CEFUSE_STATDEP_WIDTH 0x1
#define OMAP4430_CEFUSE_STATDEP_MASK (1 << 17)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT 13
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK (1 << 13)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK (1 << 12)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK (1 << 9)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK (1 << 11)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK (1 << 8)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK (1 << 11)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK (1 << 12)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT 13
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK (1 << 13)
/* Used by CM_CAM_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK (1 << 9)
/* Used by CM_ALWON_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK (1 << 12)
/* Used by CM_EMU_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9)
/* Used by CM_L4CFG_CLKSTCTRL */
#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT 9
+#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH 0x1
#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK (1 << 9)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK (1 << 9)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK (1 << 9)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK (1 << 10)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK (1 << 11)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK (1 << 12)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT 13
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK (1 << 13)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT 14
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK (1 << 14)
/* Used by CM_DSS_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK (1 << 10)
/* Used by CM_DSS_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK (1 << 9)
/* Used by CM_DUCATI_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK (1 << 8)
/* Used by CM_EMU_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK (1 << 8)
/* Used by CM_CAM_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK (1 << 10)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT 15
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK (1 << 15)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK (1 << 10)
/* Used by CM_DSS_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK (1 << 11)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK (1 << 20)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK (1 << 26)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK (1 << 21)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK (1 << 27)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT 13
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK (1 << 13)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK (1 << 12)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT 28
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK (1 << 28)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT 29
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK (1 << 29)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK (1 << 11)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT 16
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK (1 << 16)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT 17
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK (1 << 17)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT 18
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK (1 << 18)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT 19
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK (1 << 19)
/* Used by CM_CAM_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK (1 << 8)
/* Used by CM_IVAHD_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK (1 << 8)
/* Used by CM_D2D_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK (1 << 10)
/* Used by CM_L3_1_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK (1 << 8)
/* Used by CM_L3_2_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK (1 << 8)
/* Used by CM_D2D_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK (1 << 8)
/* Used by CM_SDMA_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK (1 << 8)
/* Used by CM_DSS_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK (1 << 8)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK (1 << 8)
/* Used by CM_GFX_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK (1 << 8)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK (1 << 8)
/* Used by CM_L3INSTR_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK (1 << 8)
/* Used by CM_L4SEC_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK (1 << 8)
/* Used by CM_ALWON_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK (1 << 8)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
/* Used by CM_L4CFG_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK (1 << 8)
/* Used by CM_D2D_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK (1 << 9)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK (1 << 9)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK (1 << 8)
/* Used by CM_L4SEC_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK (1 << 9)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT 12
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK (1 << 12)
/* Used by CM_MPU_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK (1 << 8)
/* Used by CM1_ABE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK (1 << 9)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT 16
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK (1 << 16)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK (1 << 17)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK (1 << 18)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK (1 << 19)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT 25
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK (1 << 25)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT 20
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK (1 << 20)
/* Used by CM_L4PER_CLKSTCTRL */
@@ -343,94 +420,114 @@
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT 22
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK (1 << 22)
/* Used by CM_L4PER_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT 24
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK (1 << 24)
/* Used by CM_MEMIF_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK (1 << 10)
/* Used by CM_GFX_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK (1 << 9)
/* Used by CM_ALWON_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK (1 << 11)
/* Used by CM_ALWON_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK (1 << 10)
/* Used by CM_ALWON_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT 9
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK (1 << 9)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK (1 << 8)
/* Used by CM_TESLA_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT 8
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK (1 << 8)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK (1 << 22)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK (1 << 23)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK (1 << 24)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK (1 << 10)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT 14
+#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK (1 << 14)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK (1 << 15)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT 10
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK (1 << 10)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK (1 << 30)
/* Used by CM_L3INIT_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK (1 << 25)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH 0x1
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT 13
+#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH 0x1
#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK (1 << 13)
/*
* Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
* CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
* CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
* CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL
*/
#define OMAP4430_CLKSEL_SHIFT 24
+#define OMAP4430_CLKSEL_WIDTH 0x1
#define OMAP4430_CLKSEL_MASK (1 << 24)
/*
@@ -438,50 +535,62 @@
* CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
*/
#define OMAP4430_CLKSEL_0_0_SHIFT 0
+#define OMAP4430_CLKSEL_0_0_WIDTH 0x1
#define OMAP4430_CLKSEL_0_0_MASK (1 << 0)
/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
#define OMAP4430_CLKSEL_0_1_SHIFT 0
+#define OMAP4430_CLKSEL_0_1_WIDTH 0x2
#define OMAP4430_CLKSEL_0_1_MASK (0x3 << 0)
/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
#define OMAP4430_CLKSEL_24_25_SHIFT 24
+#define OMAP4430_CLKSEL_24_25_WIDTH 0x2
#define OMAP4430_CLKSEL_24_25_MASK (0x3 << 24)
/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
#define OMAP4430_CLKSEL_60M_SHIFT 24
+#define OMAP4430_CLKSEL_60M_WIDTH 0x1
#define OMAP4430_CLKSEL_60M_MASK (1 << 24)
/* Used by CM_MPU_MPU_CLKCTRL */
#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT 25
+#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH 0x1
#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
/* Used by CM1_ABE_AESS_CLKCTRL */
#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24
+#define OMAP4430_CLKSEL_AESS_FCLK_WIDTH 0x1
#define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24)
/* Used by CM_CLKSEL_CORE */
#define OMAP4430_CLKSEL_CORE_SHIFT 0
+#define OMAP4430_CLKSEL_CORE_WIDTH 0x1
#define OMAP4430_CLKSEL_CORE_MASK (1 << 0)
/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
#define OMAP4430_CLKSEL_CORE_1_1_SHIFT 1
+#define OMAP4430_CLKSEL_CORE_1_1_WIDTH 0x1
#define OMAP4430_CLKSEL_CORE_1_1_MASK (1 << 1)
/* Used by CM_WKUP_USIM_CLKCTRL */
#define OMAP4430_CLKSEL_DIV_SHIFT 24
+#define OMAP4430_CLKSEL_DIV_WIDTH 0x1
#define OMAP4430_CLKSEL_DIV_MASK (1 << 24)
/* Used by CM_MPU_MPU_CLKCTRL */
#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH 0x1
#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
/* Used by CM_CAM_FDIF_CLKCTRL */
#define OMAP4430_CLKSEL_FCLK_SHIFT 24
+#define OMAP4430_CLKSEL_FCLK_WIDTH 0x2
#define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24)
/* Used by CM_L4PER_MCBSP4_CLKCTRL */
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT 25
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH 0x1
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK (1 << 25)
/*
@@ -490,34 +599,42 @@
* CM1_ABE_MCBSP3_CLKCTRL
*/
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT 26
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH 0x2
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK (0x3 << 26)
/* Used by CM_CLKSEL_CORE */
#define OMAP4430_CLKSEL_L3_SHIFT 4
+#define OMAP4430_CLKSEL_L3_WIDTH 0x1
#define OMAP4430_CLKSEL_L3_MASK (1 << 4)
/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT 2
+#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH 0x1
#define OMAP4430_CLKSEL_L3_SHADOW_MASK (1 << 2)
/* Used by CM_CLKSEL_CORE */
#define OMAP4430_CLKSEL_L4_SHIFT 8
+#define OMAP4430_CLKSEL_L4_WIDTH 0x1
#define OMAP4430_CLKSEL_L4_MASK (1 << 8)
/* Used by CM_CLKSEL_ABE */
#define OMAP4430_CLKSEL_OPP_SHIFT 0
+#define OMAP4430_CLKSEL_OPP_WIDTH 0x2
#define OMAP4430_CLKSEL_OPP_MASK (0x3 << 0)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT 27
+#define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH 0x3
#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK (0x7 << 27)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT 24
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH 0x3
#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK (0x7 << 24)
/* Used by CM_GFX_GFX_CLKCTRL */
#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT 24
+#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH 0x1
#define OMAP4430_CLKSEL_SGX_FCLK_MASK (1 << 24)
/*
@@ -525,18 +642,22 @@
* CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
*/
#define OMAP4430_CLKSEL_SOURCE_SHIFT 24
+#define OMAP4430_CLKSEL_SOURCE_WIDTH 0x2
#define OMAP4430_CLKSEL_SOURCE_MASK (0x3 << 24)
/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT 24
+#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH 0x1
#define OMAP4430_CLKSEL_SOURCE_24_24_MASK (1 << 24)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_CLKSEL_UTMI_P1_SHIFT 24
+#define OMAP4430_CLKSEL_UTMI_P1_WIDTH 0x1
#define OMAP4430_CLKSEL_UTMI_P1_MASK (1 << 24)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_CLKSEL_UTMI_P2_SHIFT 25
+#define OMAP4430_CLKSEL_UTMI_P2_WIDTH 0x1
#define OMAP4430_CLKSEL_UTMI_P2_MASK (1 << 25)
/*
@@ -549,30 +670,37 @@
* CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
*/
#define OMAP4430_CLKTRCTRL_SHIFT 0
+#define OMAP4430_CLKTRCTRL_WIDTH 0x2
#define OMAP4430_CLKTRCTRL_MASK (0x3 << 0)
/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT 0
+#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH 0x7
#define OMAP4430_CORE_DPLL_EMU_DIV_MASK (0x7f << 0)
/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT 8
+#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH 0xb
#define OMAP4430_CORE_DPLL_EMU_MULT_MASK (0x7ff << 8)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_CUSTOM_SHIFT 6
+#define OMAP4430_CUSTOM_WIDTH 0x2
#define OMAP4430_CUSTOM_MASK (0x3 << 6)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
#define OMAP4430_D2D_DYNDEP_SHIFT 18
+#define OMAP4430_D2D_DYNDEP_WIDTH 0x1
#define OMAP4430_D2D_DYNDEP_MASK (1 << 18)
/* Used by CM_MPU_STATICDEP */
#define OMAP4430_D2D_STATDEP_SHIFT 18
+#define OMAP4430_D2D_STATDEP_WIDTH 0x1
#define OMAP4430_D2D_STATDEP_MASK (1 << 18)
/* Used by CM_CLKSEL_DPLL_MPU */
#define OMAP4460_DCC_COUNT_MAX_SHIFT 24
+#define OMAP4460_DCC_COUNT_MAX_WIDTH 0x8
#define OMAP4460_DCC_COUNT_MAX_MASK (0xff << 24)
/* Used by CM_CLKSEL_DPLL_MPU */
@@ -586,22 +714,27 @@
* CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
*/
#define OMAP4430_DELTAMSTEP_SHIFT 0
+#define OMAP4430_DELTAMSTEP_WIDTH 0x14
#define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0)
/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
#define OMAP4460_DELTAMSTEP_0_20_SHIFT 0
+#define OMAP4460_DELTAMSTEP_0_20_WIDTH 0x15
#define OMAP4460_DELTAMSTEP_0_20_MASK (0x1fffff << 0)
/* Used by CM_DLL_CTRL */
#define OMAP4430_DLL_OVERRIDE_SHIFT 0
+#define OMAP4430_DLL_OVERRIDE_WIDTH 0x1
#define OMAP4430_DLL_OVERRIDE_MASK (1 << 0)
/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
#define OMAP4430_DLL_OVERRIDE_2_2_SHIFT 2
+#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH 0x1
#define OMAP4430_DLL_OVERRIDE_2_2_MASK (1 << 2)
/* Used by CM_SHADOW_FREQ_CONFIG1 */
#define OMAP4430_DLL_RESET_SHIFT 3
+#define OMAP4430_DLL_RESET_WIDTH 0x1
#define OMAP4430_DLL_RESET_MASK (1 << 3)
/*
@@ -610,30 +743,37 @@
* CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
*/
#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT 23
+#define OMAP4430_DPLL_BYP_CLKSEL_WIDTH 0x1
#define OMAP4430_DPLL_BYP_CLKSEL_MASK (1 << 23)
/* Used by CM_CLKDCOLDO_DPLL_USB */
#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH 0x1
#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
/* Used by CM_CLKSEL_DPLL_CORE */
#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK (1 << 20)
/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT 0
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH 0x5
#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT 5
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT 8
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT 10
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
/*
@@ -641,10 +781,12 @@
* CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT 0
+#define OMAP4430_DPLL_CLKOUT_DIV_WIDTH 0x5
#define OMAP4430_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT 0
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH 0x7
#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0)
/*
@@ -652,10 +794,12 @@
* CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT 5
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT 7
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK (1 << 7)
/*
@@ -663,18 +807,22 @@
* CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
*/
#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH 0x1
#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
/* Used by CM_SHADOW_FREQ_CONFIG1 */
#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT 8
+#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH 0x3
#define OMAP4430_DPLL_CORE_DPLL_EN_MASK (0x7 << 8)
/* Used by CM_SHADOW_FREQ_CONFIG1 */
#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT 11
+#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH 0x5
#define OMAP4430_DPLL_CORE_M2_DIV_MASK (0x1f << 11)
/* Used by CM_SHADOW_FREQ_CONFIG2 */
#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT 3
+#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH 0x5
#define OMAP4430_DPLL_CORE_M5_DIV_MASK (0x1f << 3)
/*
@@ -683,10 +831,12 @@
* CM_CLKSEL_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_DIV_SHIFT 0
+#define OMAP4430_DPLL_DIV_WIDTH 0x7
#define OMAP4430_DPLL_DIV_MASK (0x7f << 0)
/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
#define OMAP4430_DPLL_DIV_0_7_SHIFT 0
+#define OMAP4430_DPLL_DIV_0_7_WIDTH 0x8
#define OMAP4430_DPLL_DIV_0_7_MASK (0xff << 0)
/*
@@ -694,10 +844,12 @@
* CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH 0x1
#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT 3
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH 0x1
#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK (1 << 3)
/*
@@ -706,6 +858,7 @@
* CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
*/
#define OMAP4430_DPLL_EN_SHIFT 0
+#define OMAP4430_DPLL_EN_WIDTH 0x3
#define OMAP4430_DPLL_EN_MASK (0x7 << 0)
/*
@@ -714,6 +867,7 @@
* CM_CLKMODE_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_LPMODE_EN_SHIFT 10
+#define OMAP4430_DPLL_LPMODE_EN_WIDTH 0x1
#define OMAP4430_DPLL_LPMODE_EN_MASK (1 << 10)
/*
@@ -722,10 +876,12 @@
* CM_CLKSEL_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_MULT_SHIFT 8
+#define OMAP4430_DPLL_MULT_WIDTH 0xb
#define OMAP4430_DPLL_MULT_MASK (0x7ff << 8)
/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
#define OMAP4430_DPLL_MULT_USB_SHIFT 8
+#define OMAP4430_DPLL_MULT_USB_WIDTH 0xc
#define OMAP4430_DPLL_MULT_USB_MASK (0xfff << 8)
/*
@@ -734,10 +890,12 @@
* CM_CLKMODE_DPLL_UNIPRO
*/
#define OMAP4430_DPLL_REGM4XEN_SHIFT 11
+#define OMAP4430_DPLL_REGM4XEN_WIDTH 0x1
#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
/* Used by CM_CLKSEL_DPLL_USB */
#define OMAP4430_DPLL_SD_DIV_SHIFT 24
+#define OMAP4430_DPLL_SD_DIV_WIDTH 0x8
#define OMAP4430_DPLL_SD_DIV_MASK (0xff << 24)
/*
@@ -746,6 +904,7 @@
* CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
*/
#define OMAP4430_DPLL_SSC_ACK_SHIFT 13
+#define OMAP4430_DPLL_SSC_ACK_WIDTH 0x1
#define OMAP4430_DPLL_SSC_ACK_MASK (1 << 13)
/*
@@ -754,6 +913,7 @@
* CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
*/
#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT 14
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH 0x1
#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
/*
@@ -762,42 +922,52 @@
* CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
*/
#define OMAP4430_DPLL_SSC_EN_SHIFT 12
+#define OMAP4430_DPLL_SSC_EN_WIDTH 0x1
#define OMAP4430_DPLL_SSC_EN_MASK (1 << 12)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
#define OMAP4430_DSS_DYNDEP_SHIFT 8
+#define OMAP4430_DSS_DYNDEP_WIDTH 0x1
#define OMAP4430_DSS_DYNDEP_MASK (1 << 8)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
#define OMAP4430_DSS_STATDEP_SHIFT 8
+#define OMAP4430_DSS_STATDEP_WIDTH 0x1
#define OMAP4430_DSS_STATDEP_MASK (1 << 8)
/* Used by CM_L3_2_DYNAMICDEP */
#define OMAP4430_DUCATI_DYNDEP_SHIFT 0
+#define OMAP4430_DUCATI_DYNDEP_WIDTH 0x1
#define OMAP4430_DUCATI_DYNDEP_MASK (1 << 0)
/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
#define OMAP4430_DUCATI_STATDEP_SHIFT 0
+#define OMAP4430_DUCATI_STATDEP_WIDTH 0x1
#define OMAP4430_DUCATI_STATDEP_MASK (1 << 0)
/* Used by CM_SHADOW_FREQ_CONFIG1 */
#define OMAP4430_FREQ_UPDATE_SHIFT 0
+#define OMAP4430_FREQ_UPDATE_WIDTH 0x1
#define OMAP4430_FREQ_UPDATE_MASK (1 << 0)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_FUNC_SHIFT 16
+#define OMAP4430_FUNC_WIDTH 0xc
#define OMAP4430_FUNC_MASK (0xfff << 16)
/* Used by CM_L3_2_DYNAMICDEP */
#define OMAP4430_GFX_DYNDEP_SHIFT 10
+#define OMAP4430_GFX_DYNDEP_WIDTH 0x1
#define OMAP4430_GFX_DYNDEP_MASK (1 << 10)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
#define OMAP4430_GFX_STATDEP_SHIFT 10
+#define OMAP4430_GFX_STATDEP_WIDTH 0x1
#define OMAP4430_GFX_STATDEP_MASK (1 << 10)
/* Used by CM_SHADOW_FREQ_CONFIG2 */
#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT 0
+#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH 0x1
#define OMAP4430_GPMC_FREQ_UPDATE_MASK (1 << 0)
/*
@@ -805,6 +975,7 @@
* CM_DIV_M4_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH 0x5
#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
/*
@@ -812,6 +983,7 @@
* CM_DIV_M4_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
/*
@@ -819,6 +991,7 @@
* CM_DIV_M4_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
/*
@@ -826,6 +999,7 @@
* CM_DIV_M4_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
/*
@@ -833,6 +1007,7 @@
* CM_DIV_M5_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH 0x5
#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
/*
@@ -840,6 +1015,7 @@
* CM_DIV_M5_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
/*
@@ -847,6 +1023,7 @@
* CM_DIV_M5_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
/*
@@ -854,38 +1031,47 @@
* CM_DIV_M5_DPLL_PER
*/
#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH 0x5
#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT 0
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH 0x5
#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT 5
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT 8
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT 12
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH 0x1
#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK (1 << 12)
/*
@@ -893,53 +1079,48 @@
* CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
* CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
* CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
* CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
* CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
* CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
* CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
* CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
* CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
* CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
* CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
* CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
*/
#define OMAP4430_IDLEST_SHIFT 16
+#define OMAP4430_IDLEST_WIDTH 0x2
#define OMAP4430_IDLEST_MASK (0x3 << 16)
/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
#define OMAP4430_ISS_DYNDEP_SHIFT 9
+#define OMAP4430_ISS_DYNDEP_WIDTH 0x1
#define OMAP4430_ISS_DYNDEP_MASK (1 << 9)
/*
@@ -947,10 +1128,12 @@
* CM_TESLA_STATICDEP
*/
#define OMAP4430_ISS_STATDEP_SHIFT 9
+#define OMAP4430_ISS_STATDEP_WIDTH 0x1
#define OMAP4430_ISS_STATDEP_MASK (1 << 9)
/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
#define OMAP4430_IVAHD_DYNDEP_SHIFT 2
+#define OMAP4430_IVAHD_DYNDEP_WIDTH 0x1
#define OMAP4430_IVAHD_DYNDEP_MASK (1 << 2)
/*
@@ -959,10 +1142,12 @@
* CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_IVAHD_STATDEP_SHIFT 2
+#define OMAP4430_IVAHD_STATDEP_WIDTH 0x1
#define OMAP4430_IVAHD_STATDEP_MASK (1 << 2)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
#define OMAP4430_L3INIT_DYNDEP_SHIFT 7
+#define OMAP4430_L3INIT_DYNDEP_WIDTH 0x1
#define OMAP4430_L3INIT_DYNDEP_MASK (1 << 7)
/*
@@ -970,6 +1155,7 @@
* CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L3INIT_STATDEP_SHIFT 7
+#define OMAP4430_L3INIT_STATDEP_WIDTH 0x1
#define OMAP4430_L3INIT_STATDEP_MASK (1 << 7)
/*
@@ -977,6 +1163,7 @@
* CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
*/
#define OMAP4430_L3_1_DYNDEP_SHIFT 5
+#define OMAP4430_L3_1_DYNDEP_WIDTH 0x1
#define OMAP4430_L3_1_DYNDEP_MASK (1 << 5)
/*
@@ -986,6 +1173,7 @@
* CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L3_1_STATDEP_SHIFT 5
+#define OMAP4430_L3_1_STATDEP_WIDTH 0x1
#define OMAP4430_L3_1_STATDEP_MASK (1 << 5)
/*
@@ -995,6 +1183,7 @@
* CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
*/
#define OMAP4430_L3_2_DYNDEP_SHIFT 6
+#define OMAP4430_L3_2_DYNDEP_WIDTH 0x1
#define OMAP4430_L3_2_DYNDEP_MASK (1 << 6)
/*
@@ -1004,10 +1193,12 @@
* CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L3_2_STATDEP_SHIFT 6
+#define OMAP4430_L3_2_STATDEP_WIDTH 0x1
#define OMAP4430_L3_2_STATDEP_MASK (1 << 6)
/* Used by CM_L3_1_DYNAMICDEP */
#define OMAP4430_L4CFG_DYNDEP_SHIFT 12
+#define OMAP4430_L4CFG_DYNDEP_WIDTH 0x1
#define OMAP4430_L4CFG_DYNDEP_MASK (1 << 12)
/*
@@ -1015,10 +1206,12 @@
* CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L4CFG_STATDEP_SHIFT 12
+#define OMAP4430_L4CFG_STATDEP_WIDTH 0x1
#define OMAP4430_L4CFG_STATDEP_MASK (1 << 12)
/* Used by CM_L3_2_DYNAMICDEP */
#define OMAP4430_L4PER_DYNDEP_SHIFT 13
+#define OMAP4430_L4PER_DYNDEP_WIDTH 0x1
#define OMAP4430_L4PER_DYNDEP_MASK (1 << 13)
/*
@@ -1026,10 +1219,12 @@
* CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L4PER_STATDEP_SHIFT 13
+#define OMAP4430_L4PER_STATDEP_WIDTH 0x1
#define OMAP4430_L4PER_STATDEP_MASK (1 << 13)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
#define OMAP4430_L4SEC_DYNDEP_SHIFT 14
+#define OMAP4430_L4SEC_DYNDEP_WIDTH 0x1
#define OMAP4430_L4SEC_DYNDEP_MASK (1 << 14)
/*
@@ -1037,10 +1232,12 @@
* CM_SDMA_STATICDEP
*/
#define OMAP4430_L4SEC_STATDEP_SHIFT 14
+#define OMAP4430_L4SEC_STATDEP_WIDTH 0x1
#define OMAP4430_L4SEC_STATDEP_MASK (1 << 14)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4430_L4WKUP_DYNDEP_SHIFT 15
+#define OMAP4430_L4WKUP_DYNDEP_WIDTH 0x1
#define OMAP4430_L4WKUP_DYNDEP_MASK (1 << 15)
/*
@@ -1048,6 +1245,7 @@
* CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_L4WKUP_STATDEP_SHIFT 15
+#define OMAP4430_L4WKUP_STATDEP_WIDTH 0x1
#define OMAP4430_L4WKUP_STATDEP_MASK (1 << 15)
/*
@@ -1055,6 +1253,7 @@
* CM_MPU_DYNAMICDEP
*/
#define OMAP4430_MEMIF_DYNDEP_SHIFT 4
+#define OMAP4430_MEMIF_DYNDEP_WIDTH 0x1
#define OMAP4430_MEMIF_DYNDEP_MASK (1 << 4)
/*
@@ -1064,6 +1263,7 @@
* CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
*/
#define OMAP4430_MEMIF_STATDEP_SHIFT 4
+#define OMAP4430_MEMIF_STATDEP_WIDTH 0x1
#define OMAP4430_MEMIF_STATDEP_MASK (1 << 4)
/*
@@ -1073,6 +1273,7 @@
* CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
*/
#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT 8
+#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH 0x3
#define OMAP4430_MODFREQDIV_EXPONENT_MASK (0x7 << 8)
/*
@@ -1082,6 +1283,7 @@
* CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
*/
#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT 0
+#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH 0x7
#define OMAP4430_MODFREQDIV_MANTISSA_MASK (0x7f << 0)
/*
@@ -1089,69 +1291,68 @@
* CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
* CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
* CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
* CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
* CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
* CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
* CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
* CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
* CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
* CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
* CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
* CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
*/
#define OMAP4430_MODULEMODE_SHIFT 0
+#define OMAP4430_MODULEMODE_WIDTH 0x2
#define OMAP4430_MODULEMODE_MASK (0x3 << 0)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4460_MPU_DYNDEP_SHIFT 19
+#define OMAP4460_MPU_DYNDEP_WIDTH 0x1
#define OMAP4460_MPU_DYNDEP_MASK (1 << 19)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9)
/* Used by CM_WKUP_BANDGAP_CLKCTRL */
#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT 8
+#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK (1 << 8)
/* Used by CM_ALWON_USBPHY_CLKCTRL */
#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT 8
+#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_CLK32K_MASK (1 << 8)
/* Used by CM_CAM_ISS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK (1 << 8)
/*
@@ -1160,126 +1361,157 @@
* CM_WKUP_GPIO1_CLKCTRL
*/
#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_DBCLK_MASK (1 << 8)
/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK (1 << 8)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_DSSCLK_MASK (1 << 8)
/* Used by CM_WKUP_USIM_CLKCTRL */
#define OMAP4430_OPTFCLKEN_FCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_FCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_FCLK_MASK (1 << 8)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT 8
+#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_FCLK0_MASK (1 << 8)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT 9
+#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_FCLK1_MASK (1 << 9)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT 10
+#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_FCLK2_MASK (1 << 10)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT 15
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK (1 << 15)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK (1 << 13)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK (1 << 14)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK (1 << 11)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK (1 << 12)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK (1 << 8)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT 9
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK (1 << 9)
/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT 8
+#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_PHY_48M_MASK (1 << 8)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT 10
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK (1 << 10)
/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT 11
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK (1 << 11)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10
+#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10)
/* Used by CM_WKUP_BANDGAP_CLKCTRL */
#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT 8
+#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH 0x1
#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK (1 << 8)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11
+#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11)
/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK (1 << 8)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK (1 << 8)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT 9
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK (1 << 9)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT 10
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK (1 << 10)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK (1 << 8)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK (1 << 9)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK (1 << 10)
/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
#define OMAP4430_OPTFCLKEN_XCLK_SHIFT 8
+#define OMAP4430_OPTFCLKEN_XCLK_WIDTH 0x1
#define OMAP4430_OPTFCLKEN_XCLK_MASK (1 << 8)
/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
#define OMAP4430_OVERRIDE_ENABLE_SHIFT 19
+#define OMAP4430_OVERRIDE_ENABLE_WIDTH 0x1
#define OMAP4430_OVERRIDE_ENABLE_MASK (1 << 19)
/* Used by CM_CLKSEL_ABE */
#define OMAP4430_PAD_CLKS_GATE_SHIFT 8
+#define OMAP4430_PAD_CLKS_GATE_WIDTH 0x1
#define OMAP4430_PAD_CLKS_GATE_MASK (1 << 8)
/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
#define OMAP4430_PERF_CURRENT_SHIFT 0
+#define OMAP4430_PERF_CURRENT_WIDTH 0x8
#define OMAP4430_PERF_CURRENT_MASK (0xff << 0)
/*
@@ -1288,74 +1520,85 @@
* CM_IVA_DVFS_PERF_TESLA
*/
#define OMAP4430_PERF_REQ_SHIFT 0
+#define OMAP4430_PERF_REQ_WIDTH 0x8
#define OMAP4430_PERF_REQ_MASK (0xff << 0)
/* Used by CM_RESTORE_ST */
#define OMAP4430_PHASE1_COMPLETED_SHIFT 0
+#define OMAP4430_PHASE1_COMPLETED_WIDTH 0x1
#define OMAP4430_PHASE1_COMPLETED_MASK (1 << 0)
/* Used by CM_RESTORE_ST */
#define OMAP4430_PHASE2A_COMPLETED_SHIFT 1
+#define OMAP4430_PHASE2A_COMPLETED_WIDTH 0x1
#define OMAP4430_PHASE2A_COMPLETED_MASK (1 << 1)
/* Used by CM_RESTORE_ST */
#define OMAP4430_PHASE2B_COMPLETED_SHIFT 2
+#define OMAP4430_PHASE2B_COMPLETED_WIDTH 0x1
#define OMAP4430_PHASE2B_COMPLETED_MASK (1 << 2)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT 20
+#define OMAP4430_PMD_STM_MUX_CTRL_WIDTH 0x2
#define OMAP4430_PMD_STM_MUX_CTRL_MASK (0x3 << 20)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT 22
+#define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH 0x2
#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK (0x3 << 22)
/* Used by CM_DYN_DEP_PRESCAL */
#define OMAP4430_PRESCAL_SHIFT 0
+#define OMAP4430_PRESCAL_WIDTH 0x6
#define OMAP4430_PRESCAL_MASK (0x3f << 0)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_R_RTL_SHIFT 11
+#define OMAP4430_R_RTL_WIDTH 0x5
#define OMAP4430_R_RTL_MASK (0x1f << 11)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
#define OMAP4430_SAR_MODE_SHIFT 4
+#define OMAP4430_SAR_MODE_WIDTH 0x1
#define OMAP4430_SAR_MODE_MASK (1 << 4)
/* Used by CM_SCALE_FCLK */
#define OMAP4430_SCALE_FCLK_SHIFT 0
+#define OMAP4430_SCALE_FCLK_WIDTH 0x1
#define OMAP4430_SCALE_FCLK_MASK (1 << 0)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_SCHEME_SHIFT 30
+#define OMAP4430_SCHEME_WIDTH 0x2
#define OMAP4430_SCHEME_MASK (0x3 << 30)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4430_SDMA_DYNDEP_SHIFT 11
+#define OMAP4430_SDMA_DYNDEP_WIDTH 0x1
#define OMAP4430_SDMA_DYNDEP_MASK (1 << 11)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
#define OMAP4430_SDMA_STATDEP_SHIFT 11
+#define OMAP4430_SDMA_STATDEP_WIDTH 0x1
#define OMAP4430_SDMA_STATDEP_MASK (1 << 11)
/* Used by CM_CLKSEL_ABE */
#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT 10
+#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH 0x1
#define OMAP4430_SLIMBUS_CLK_GATE_MASK (1 << 10)
/*
* Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
* CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
* CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
+ * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
*/
#define OMAP4430_STBYST_SHIFT 18
+#define OMAP4430_STBYST_WIDTH 0x1
#define OMAP4430_STBYST_MASK (1 << 18)
/*
@@ -1364,10 +1607,12 @@
* CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
*/
#define OMAP4430_ST_DPLL_CLK_SHIFT 0
+#define OMAP4430_ST_DPLL_CLK_WIDTH 0x1
#define OMAP4430_ST_DPLL_CLK_MASK (1 << 0)
/* Used by CM_CLKDCOLDO_DPLL_USB */
#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT 9
+#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH 0x1
#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK (1 << 9)
/*
@@ -1375,14 +1620,17 @@
* CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
*/
#define OMAP4430_ST_DPLL_CLKOUT_SHIFT 9
+#define OMAP4430_ST_DPLL_CLKOUT_WIDTH 0x1
#define OMAP4430_ST_DPLL_CLKOUT_MASK (1 << 9)
/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT 9
+#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH 0x1
#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK (1 << 9)
/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT 11
+#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH 0x1
#define OMAP4430_ST_DPLL_CLKOUTX2_MASK (1 << 11)
/*
@@ -1390,6 +1638,7 @@
* CM_DIV_M4_DPLL_PER
*/
#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT 9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH 0x1
#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
/*
@@ -1397,14 +1646,17 @@
* CM_DIV_M5_DPLL_PER
*/
#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT 9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH 0x1
#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT 9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH 0x1
#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT 9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH 0x1
#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK (1 << 9)
/*
@@ -1413,18 +1665,22 @@
* CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
*/
#define OMAP4430_ST_MN_BYPASS_SHIFT 8
+#define OMAP4430_ST_MN_BYPASS_WIDTH 0x1
#define OMAP4430_ST_MN_BYPASS_MASK (1 << 8)
/* Used by CM_SYS_CLKSEL */
#define OMAP4430_SYS_CLKSEL_SHIFT 0
+#define OMAP4430_SYS_CLKSEL_WIDTH 0x3
#define OMAP4430_SYS_CLKSEL_MASK (0x7 << 0)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4430_TESLA_DYNDEP_SHIFT 1
+#define OMAP4430_TESLA_DYNDEP_WIDTH 0x1
#define OMAP4430_TESLA_DYNDEP_MASK (1 << 1)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
#define OMAP4430_TESLA_STATDEP_SHIFT 1
+#define OMAP4430_TESLA_STATDEP_WIDTH 0x1
#define OMAP4430_TESLA_STATDEP_MASK (1 << 1)
/*
@@ -1433,13 +1689,16 @@
* CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
*/
#define OMAP4430_WINDOWSIZE_SHIFT 24
+#define OMAP4430_WINDOWSIZE_WIDTH 0x4
#define OMAP4430_WINDOWSIZE_MASK (0xf << 24)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_X_MAJOR_SHIFT 8
+#define OMAP4430_X_MAJOR_WIDTH 0x3
#define OMAP4430_X_MAJOR_MASK (0x7 << 8)
/* Used by REVISION_CM1, REVISION_CM2 */
#define OMAP4430_Y_MINOR_SHIFT 0
+#define OMAP4430_Y_MINOR_WIDTH 0x6
#define OMAP4430_Y_MINOR_MASK (0x3f << 0)
#endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index a911e76..7f07ab0 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -35,7 +35,7 @@
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
static const u8 cm_idlest_offs[] = {
- CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
};
u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 088bbad..57b2f3c 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -71,6 +71,7 @@
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
+#define OMAP24XX_CM_IDLEST4 0x002c
#define OMAP2430_CM_IDLEST3 0x0028
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 123186a..a89e825 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -354,6 +354,7 @@
/* AM33XX CONTROL_STATUS bitfields (partial) */
#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH 0x2
#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22)
/* CONTROL OMAP STATUS register to identify OMAP3 features */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d092d2a8..c8c2117 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -433,35 +433,24 @@ static void omap_init_mcspi(void)
static inline void omap_init_mcspi(void) {}
#endif
-static struct resource omap2_pmu_resource = {
- .start = 3 + OMAP_INTC_START,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct resource omap3_pmu_resource = {
- .start = 3 + OMAP_INTC_START,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device omap_pmu_device = {
- .name = "arm-pmu",
- .id = -1,
- .num_resources = 1,
-};
-
-static void omap_init_pmu(void)
+/**
+ * omap_init_rng - bind the RNG hwmod to the RNG omap_device
+ *
+ * Bind the RNG hwmod to the RNG omap_device. No return value.
+ */
+static void omap_init_rng(void)
{
- if (cpu_is_omap24xx())
- omap_pmu_device.resource = &omap2_pmu_resource;
- else if (cpu_is_omap34xx())
- omap_pmu_device.resource = &omap3_pmu_resource;
- else
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+
+ oh = omap_hwmod_lookup("rng");
+ if (!oh)
return;
- platform_device_register(&omap_pmu_device);
+ pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
}
-
#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
#ifdef CONFIG_ARCH_OMAP2
@@ -646,8 +635,8 @@ static int __init omap2_init_devices(void)
omap_init_mcpdm();
omap_init_mcspi();
}
- omap_init_pmu();
omap_init_sti();
+ omap_init_rng();
omap_init_sham();
omap_init_aes();
omap_init_vout();
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index e470c6e..7012068 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -488,7 +488,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
- clk_enable(oc->_clk);
+ clk_prepare_enable(oc->_clk);
dispc_disable_outputs();
@@ -515,7 +515,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
- clk_disable(oc->_clk);
+ clk_disable_unprepare(oc->_clk);
r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 27d79de..814e180 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -63,8 +63,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
const struct dpll_data *dd;
int i = 0;
int ret = -EINVAL;
+ const char *clk_name;
dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk);
state <<= __ffs(dd->idlest_mask);
@@ -76,10 +78,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
if (i == MAX_DPLL_WAIT_TRIES) {
printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk->name, (state) ? "locked" : "bypassed");
+ clk_name, (state) ? "locked" : "bypassed");
} else {
pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk->name, (state) ? "locked" : "bypassed", i);
+ clk_name, (state) ? "locked" : "bypassed", i);
ret = 0;
}
@@ -93,7 +95,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
unsigned long fint;
u16 f = 0;
- fint = clk->dpll_data->clk_ref->rate / n;
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
pr_debug("clock: fint is %lu\n", fint);
@@ -140,7 +142,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
u8 state = 1;
int r = 0;
- pr_debug("clock: locking DPLL %s\n", clk->name);
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
dd = clk->dpll_data;
state <<= __ffs(dd->idlest_mask);
@@ -187,7 +189,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
return -EINVAL;
pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- clk->name);
+ __clk_get_name(clk));
ai = omap3_dpll_autoidle_read(clk);
@@ -217,7 +219,7 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
return -EINVAL;
- pr_debug("clock: stopping DPLL %s\n", clk->name);
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
ai = omap3_dpll_autoidle_read(clk);
@@ -245,7 +247,7 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
{
unsigned long fint, clkinp; /* watch out for overflow */
- clkinp = clk->parent->rate;
+ clkinp = __clk_get_rate(__clk_get_parent(clk));
fint = (clkinp / n) * m;
if (fint < 1000000000)
@@ -271,7 +273,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
unsigned long clkinp, sd; /* watch out for overflow */
int mod1, mod2;
- clkinp = clk->parent->rate;
+ clkinp = __clk_get_rate(__clk_get_parent(clk));
/*
* target sigma-delta to near 250MHz
@@ -380,16 +382,19 @@ int omap3_noncore_dpll_enable(struct clk *clk)
{
int r;
struct dpll_data *dd;
+ struct clk *parent;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
- if (clk->rate == dd->clk_bypass->rate) {
- WARN_ON(clk->parent != dd->clk_bypass);
+ parent = __clk_get_parent(clk);
+
+ if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
} else {
- WARN_ON(clk->parent != dd->clk_ref);
+ WARN_ON(parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
}
/*
@@ -432,7 +437,7 @@ void omap3_noncore_dpll_disable(struct clk *clk)
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
{
struct clk *new_parent = NULL;
- unsigned long hw_rate;
+ unsigned long hw_rate, bypass_rate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
@@ -456,7 +461,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
omap2_clk_enable(dd->clk_bypass);
omap2_clk_enable(dd->clk_ref);
- if (dd->clk_bypass->rate == rate &&
+ bypass_rate = __clk_get_rate(dd->clk_bypass);
+ if (bypass_rate == rate &&
(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
@@ -479,7 +485,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
}
pr_debug("clock: %s: set rate: locking rate to %lu.\n",
- clk->name, rate);
+ __clk_get_name(clk), rate);
ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
dd->last_rounded_n, freqsel);
@@ -557,7 +563,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
if (!dd->autoidle_reg) {
pr_debug("clock: DPLL %s: autoidle not supported\n",
- clk->name);
+ __clk_get_name(clk));
return;
}
@@ -591,7 +597,7 @@ void omap3_dpll_deny_idle(struct clk *clk)
if (!dd->autoidle_reg) {
pr_debug("clock: DPLL %s: autoidle not supported\n",
- clk->name);
+ __clk_get_name(clk));
return;
}
@@ -617,11 +623,12 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
unsigned long rate;
u32 v;
struct clk *pclk;
+ unsigned long parent_rate;
/* Walk up the parents of clk, looking for a DPLL */
- pclk = clk->parent;
+ pclk = __clk_get_parent(clk);
while (pclk && !pclk->dpll_data)
- pclk = pclk->parent;
+ pclk = __clk_get_parent(pclk);
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
@@ -633,12 +640,13 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
WARN_ON(!dd->enable_mask);
+ parent_rate = __clk_get_rate(__clk_get_parent(clk));
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
- rate = clk->parent->rate;
+ rate = parent_rate;
else
- rate = clk->parent->rate * 2;
+ rate = parent_rate * 2;
return rate;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 72428bd..8ab1e1b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <plat/gpmc.h>
@@ -31,10 +32,13 @@
#include <plat/cpu.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
+#include <plat/omap_device.h>
#include "soc.h"
#include "common.h"
+#define DEVICE_NAME "omap-gpmc"
+
/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
@@ -83,6 +87,12 @@
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE 2
+#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf)
+#define GPMC_REVISION_MINOR(l) (l & 0xf)
+
+#define GPMC_HAS_WR_ACCESS 0x1
+#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
+
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
#define GPMC_NR_IRQ 2
@@ -128,7 +138,10 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
-
+static struct device *gpmc_dev;
+static int gpmc_irq;
+static resource_size_t phys_base, mem_size;
+static unsigned gpmc_capability;
static void __iomem *gpmc_base;
static struct clk *gpmc_l3_clk;
@@ -318,10 +331,10 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
- if (cpu_is_omap34xx()) {
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+ if (gpmc_capability & GPMC_HAS_WR_ACCESS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
- }
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
@@ -431,6 +444,20 @@ static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
return r;
}
+static int gpmc_cs_delete_mem(int cs)
+{
+ struct resource *res = &gpmc_cs_mem[cs];
+ int r;
+
+ spin_lock(&gpmc_mem_lock);
+ r = release_resource(&gpmc_cs_mem[cs]);
+ res->start = 0;
+ res->end = 0;
+ spin_unlock(&gpmc_mem_lock);
+
+ return r;
+}
+
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct resource *res = &gpmc_cs_mem[cs];
@@ -767,7 +794,7 @@ static void gpmc_irq_noop(struct irq_data *data) { }
static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
-static int gpmc_setup_irq(int gpmc_irq)
+static int gpmc_setup_irq(void)
{
int i;
u32 regval;
@@ -811,7 +838,37 @@ static int gpmc_setup_irq(int gpmc_irq)
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
}
-static void __init gpmc_mem_init(void)
+static __exit int gpmc_free_irq(void)
+{
+ int i;
+
+ if (gpmc_irq)
+ free_irq(gpmc_irq, NULL);
+
+ for (i = 0; i < GPMC_NR_IRQ; i++) {
+ irq_set_handler(gpmc_client_irq[i].irq, NULL);
+ irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
+ irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
+ }
+
+ irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
+
+ return 0;
+}
+
+static void __devexit gpmc_mem_exit(void)
+{
+ int cs;
+
+ for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ if (!gpmc_cs_mem_enabled(cs))
+ continue;
+ gpmc_cs_delete_mem(cs);
+ }
+
+}
+
+static void __devinit gpmc_mem_init(void)
{
int cs;
unsigned long boot_rom_space = 0;
@@ -838,65 +895,104 @@ static void __init gpmc_mem_init(void)
}
}
-static int __init gpmc_init(void)
+static __devinit int gpmc_probe(struct platform_device *pdev)
{
u32 l;
- int ret = -EINVAL;
- int gpmc_irq;
- char *ck = NULL;
-
- if (cpu_is_omap24xx()) {
- ck = "core_l3_ck";
- if (cpu_is_omap2420())
- l = OMAP2420_GPMC_BASE;
- else
- l = OMAP34XX_GPMC_BASE;
- gpmc_irq = 20 + OMAP_INTC_START;
- } else if (cpu_is_omap34xx()) {
- ck = "gpmc_fck";
- l = OMAP34XX_GPMC_BASE;
- gpmc_irq = 20 + OMAP_INTC_START;
- } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
- /* Base address and irq number are same for OMAP4/5 */
- ck = "gpmc_ck";
- l = OMAP44XX_GPMC_BASE;
- gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENOENT;
+
+ phys_base = res->start;
+ mem_size = resource_size(res);
+
+ gpmc_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!gpmc_base) {
+ dev_err(&pdev->dev, "error: request memory / ioremap\n");
+ return -EADDRNOTAVAIL;
}
- if (WARN_ON(!ck))
- return ret;
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL)
+ dev_warn(&pdev->dev, "Failed to get resource: irq\n");
+ else
+ gpmc_irq = res->start;
- gpmc_l3_clk = clk_get(NULL, ck);
+ gpmc_l3_clk = clk_get(&pdev->dev, "fck");
if (IS_ERR(gpmc_l3_clk)) {
- printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
- BUG();
+ dev_err(&pdev->dev, "error: clk_get\n");
+ gpmc_irq = 0;
+ return PTR_ERR(gpmc_l3_clk);
}
- gpmc_base = ioremap(l, SZ_4K);
- if (!gpmc_base) {
- clk_put(gpmc_l3_clk);
- printk(KERN_ERR "Could not get GPMC register memory\n");
- BUG();
- }
+ clk_prepare_enable(gpmc_l3_clk);
- clk_enable(gpmc_l3_clk);
+ gpmc_dev = &pdev->dev;
l = gpmc_read_reg(GPMC_REVISION);
- printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
- /* Set smart idle mode and automatic L3 clock gating */
- l = gpmc_read_reg(GPMC_SYSCONFIG);
- l &= 0x03 << 3;
- l |= (0x02 << 3) | (1 << 0);
- gpmc_write_reg(GPMC_SYSCONFIG, l);
+ if (GPMC_REVISION_MAJOR(l) > 0x4)
+ gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+ dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
+ GPMC_REVISION_MINOR(l));
+
gpmc_mem_init();
- ret = gpmc_setup_irq(gpmc_irq);
- if (ret)
- pr_err("gpmc: irq-%d could not claim: err %d\n",
- gpmc_irq, ret);
- return ret;
+ if (IS_ERR_VALUE(gpmc_setup_irq()))
+ dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+
+ return 0;
}
+
+static __exit int gpmc_remove(struct platform_device *pdev)
+{
+ gpmc_free_irq();
+ gpmc_mem_exit();
+ gpmc_dev = NULL;
+ return 0;
+}
+
+static struct platform_driver gpmc_driver = {
+ .probe = gpmc_probe,
+ .remove = __devexit_p(gpmc_remove),
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static __init int gpmc_init(void)
+{
+ return platform_driver_register(&gpmc_driver);
+}
+
+static __exit void gpmc_exit(void)
+{
+ platform_driver_unregister(&gpmc_driver);
+
+}
+
postcore_initcall(gpmc_init);
+module_exit(gpmc_exit);
+
+static int __init omap_gpmc_init(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char *oh_name = "gpmc";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -ENODEV;
+ }
+
+ pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+}
+postcore_initcall(omap_gpmc_init);
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
{
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 00c0066..299ca28 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -679,16 +679,25 @@ static int _init_main_clk(struct omap_hwmod *oh)
if (!oh->main_clk)
return 0;
- oh->_clk = omap_clk_get_by_name(oh->main_clk);
- if (!oh->_clk) {
+ oh->_clk = clk_get(NULL, oh->main_clk);
+ if (IS_ERR(oh->_clk)) {
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
return -EINVAL;
}
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(oh->_clk);
if (!oh->_clk->clkdm)
- pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
- oh->main_clk, oh->_clk->name);
+ pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
+ oh->name, oh->main_clk);
return ret;
}
@@ -715,13 +724,22 @@ static int _init_interface_clks(struct omap_hwmod *oh)
if (!os->clk)
continue;
- c = omap_clk_get_by_name(os->clk);
- if (!c) {
+ c = clk_get(NULL, os->clk);
+ if (IS_ERR(c)) {
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
}
os->_clk = c;
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(os->_clk);
}
return ret;
@@ -742,13 +760,22 @@ static int _init_opt_clks(struct omap_hwmod *oh)
int ret = 0;
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
- c = omap_clk_get_by_name(oc->clk);
- if (!c) {
+ c = clk_get(NULL, oc->clk);
+ if (IS_ERR(c)) {
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
}
oc->_clk = c;
+ /*
+ * HACK: This needs a re-visit once clk_prepare() is implemented
+ * to do something meaningful. Today its just a no-op.
+ * If clk_prepare() is used at some point to do things like
+ * voltage scaling etc, then this would have to be moved to
+ * some point where subsystems like i2c and pmic become
+ * available.
+ */
+ clk_prepare(oc->_clk);
}
return ret;
@@ -827,7 +854,7 @@ static void _enable_optional_clocks(struct omap_hwmod *oh)
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
- oc->_clk->name);
+ __clk_get_name(oc->_clk));
clk_enable(oc->_clk);
}
}
@@ -842,7 +869,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
- oc->_clk->name);
+ __clk_get_name(oc->_clk));
clk_disable(oc->_clk);
}
}
@@ -900,10 +927,10 @@ static void _am33xx_enable_module(struct omap_hwmod *oh)
*/
static int _omap4_wait_target_disable(struct omap_hwmod *oh)
{
- if (!oh || !oh->clkdm)
+ if (!oh)
return -EINVAL;
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm)
return 0;
if (oh->flags & HWMOD_NO_IDLEST)
@@ -1427,8 +1454,10 @@ static struct omap_hwmod *_lookup(const char *name)
*/
static int _init_clkdm(struct omap_hwmod *oh)
{
- if (!oh->clkdm_name)
+ if (!oh->clkdm_name) {
+ pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name);
return 0;
+ }
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
@@ -1556,6 +1585,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
int ret = -EINVAL;
+ int hwsup = 0;
if (!oh)
return -EINVAL;
@@ -1567,10 +1597,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (IS_ERR_VALUE(ret))
return ret;
+ if (oh->clkdm) {
+ /*
+ * A clockdomain must be in SW_SUP otherwise reset
+ * might not be completed. The clockdomain can be set
+ * in HW_AUTO only when the module become ready.
+ */
+ hwsup = clkdm_in_hwsup(oh->clkdm);
+ ret = clkdm_hwmod_enable(oh->clkdm, oh);
+ if (ret) {
+ WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+ oh->name, oh->clkdm->name, ret);
+ return ret;
+ }
+ }
+
+ _enable_clocks(oh);
+ if (soc_ops.enable_module)
+ soc_ops.enable_module(oh);
+
ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
+ _disable_clocks(oh);
+
if (ret == -EBUSY)
pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+ if (!ret) {
+ /*
+ * Set the clockdomain to HW_AUTO, assuming that the
+ * previous state was HW_AUTO.
+ */
+ if (oh->clkdm && hwsup)
+ clkdm_allow_idle(oh->clkdm);
+ } else {
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
+ }
+
return ret;
}
@@ -1605,25 +1671,28 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
}
/**
- * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset
+ * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset
* @oh: struct omap_hwmod *
*
- * If any hardreset line associated with @oh is asserted, then return true.
- * Otherwise, if @oh has no hardreset lines associated with it, or if
- * no hardreset lines associated with @oh are asserted, then return false.
+ * If all hardreset lines associated with @oh are asserted, then return true.
+ * Otherwise, if part of @oh is out hardreset or if no hardreset lines
+ * associated with @oh are asserted, then return false.
* This function is used to avoid executing some parts of the IP block
- * enable/disable sequence if a hardreset line is set.
+ * enable/disable sequence if its hardreset line is set.
*/
-static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
{
- int i;
+ int i, rst_cnt = 0;
if (oh->rst_lines_cnt == 0)
return false;
for (i = 0; i < oh->rst_lines_cnt; i++)
if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
- return true;
+ rst_cnt++;
+
+ if (oh->rst_lines_cnt == rst_cnt)
+ return true;
return false;
}
@@ -1642,6 +1711,13 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return -EINVAL;
+ /*
+ * Since integration code might still be doing something, only
+ * disable if all lines are under hardreset.
+ */
+ if (!_are_all_hardreset_lines_asserted(oh))
+ return 0;
+
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
omap4_cminst_module_disable(oh->clkdm->prcm_partition,
@@ -1649,9 +1725,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
- if (_are_any_hardreset_lines_asserted(oh))
- return 0;
-
v = _omap4_wait_target_disable(oh);
if (v)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
@@ -1679,7 +1752,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh)
am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
v = _am33xx_wait_target_disable(oh);
@@ -1907,7 +1980,7 @@ static int _enable(struct omap_hwmod *oh)
}
/*
- * If an IP block contains HW reset lines and any of them are
+ * If an IP block contains HW reset lines and all of them are
* asserted, we let integration code associated with that
* block handle the enable. We've received very little
* information on what those driver authors need, and until
@@ -1915,7 +1988,7 @@ static int _enable(struct omap_hwmod *oh)
* posted to the public lists, this is probably the best we
* can do.
*/
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
/* Mux pins for device runtime if populated */
@@ -1934,7 +2007,8 @@ static int _enable(struct omap_hwmod *oh)
* completely the module. The clockdomain can be set
* in HW_AUTO only when the module become ready.
*/
- hwsup = clkdm_in_hwsup(oh->clkdm);
+ hwsup = clkdm_in_hwsup(oh->clkdm) &&
+ !clkdm_missing_idle_reporting(oh->clkdm);
r = clkdm_hwmod_enable(oh->clkdm, oh);
if (r) {
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -1996,7 +2070,7 @@ static int _idle(struct omap_hwmod *oh)
return -EINVAL;
}
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
if (oh->class->sysc)
@@ -2084,7 +2158,7 @@ static int _shutdown(struct omap_hwmod *oh)
return -EINVAL;
}
- if (_are_any_hardreset_lines_asserted(oh))
+ if (_are_all_hardreset_lines_asserted(oh))
return 0;
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
@@ -2608,10 +2682,10 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh)
*/
static int _omap4_wait_target_ready(struct omap_hwmod *oh)
{
- if (!oh || !oh->clkdm)
+ if (!oh)
return -EINVAL;
- if (oh->flags & HWMOD_NO_IDLEST)
+ if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm)
return 0;
if (!_find_mpu_rt_port(oh))
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 10575a1..b5db600 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -536,6 +536,15 @@ static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
{ }
};
+static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = {
+ {
+ .pa_start = 0x6800a000,
+ .pa_end = 0x6800afff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_counter_32k_hwmod,
@@ -544,6 +553,14 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2xxx_gpmc_hwmod,
+ .clk = "core_l3_ck",
+ .addr = omap2420_gpmc_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l3_main__l4_core,
&omap2xxx_mpu__l3_main,
@@ -585,8 +602,10 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
&omap2420_l4_core__msdi1,
+ &omap2xxx_l4_core__rng,
&omap2420_l4_core__hdq1w,
&omap2420_l4_wkup__counter_32k,
+ &omap2420_l3__gpmc,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 60de70f..c455e41 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -888,6 +888,15 @@ static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = {
{ }
};
+static struct omap_hwmod_addr_space omap2430_gpmc_addrs[] = {
+ {
+ .pa_start = 0x6e000000,
+ .pa_end = 0x6e000fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_counter_32k_hwmod,
@@ -896,6 +905,14 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2xxx_gpmc_hwmod,
+ .clk = "core_l3_ck",
+ .addr = omap2430_gpmc_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l3_main__l4_core,
&omap2xxx_mpu__l3_main,
@@ -945,7 +962,9 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
&omap2430_l4_core__mcbsp4,
&omap2430_l4_core__mcbsp5,
&omap2430_l4_core__hdq1w,
+ &omap2xxx_l4_core__rng,
&omap2430_l4_wkup__counter_32k,
+ &omap2430_l3__gpmc,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index f853a0b..1a1287d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -129,6 +129,15 @@ struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
{ }
};
+static struct omap_hwmod_addr_space omap2_rng_addr_space[] = {
+ {
+ .pa_start = 0x480a0000,
+ .pa_end = 0x480a004f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
/*
* Common interconnect data
*/
@@ -372,3 +381,11 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_core -> rng */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_rng_hwmod,
+ .clk = "rng_ick",
+ .addr = omap2_rng_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index feeb401..35dcdb6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -173,6 +173,26 @@ struct omap_hwmod_class omap2xxx_mcspi_class = {
};
/*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = {
+ .name = "gpmc",
+ .sysc = &omap2xxx_gpmc_sysc,
+};
+
+/*
* IP blocks
*/
@@ -198,8 +218,14 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
};
/* MPU */
+static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = {
+ { .name = "pmu", .irq = 3 },
+ { .irq = -1 }
+};
+
struct omap_hwmod omap2xxx_mpu_hwmod = {
.name = "mpu",
+ .mpu_irqs = omap2xxx_mpu_irqs,
.class = &mpu_hwmod_class,
.main_clk = "mpu_ck",
};
@@ -220,6 +246,11 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
.timer_capability = OMAP_TIMER_HAS_PWM,
};
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
/* timer1 */
struct omap_hwmod omap2xxx_timer1_hwmod = {
@@ -308,6 +339,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -326,6 +358,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -344,6 +377,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -362,6 +396,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
};
@@ -724,7 +759,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
.dev_attr = &omap_mcspi2_dev_attr,
};
-
static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
.name = "counter",
};
@@ -743,3 +777,77 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = {
},
.class = &omap2xxx_counter_hwmod_class,
};
+
+/* gpmc */
+static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = {
+ { .irq = 20 },
+ { .irq = -1 }
+};
+
+struct omap_hwmod omap2xxx_gpmc_hwmod = {
+ .name = "gpmc",
+ .class = &omap2xxx_gpmc_hwmod_class,
+ .mpu_irqs = omap2xxx_gpmc_irqs,
+ .main_clk = "gpmc_fck",
+ /*
+ * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+ * block. It is not being added due to any known bugs with
+ * resetting the GPMC IP block, but rather because any timings
+ * set by the bootloader are not being correctly programmed by
+ * the kernel from the board file or DT data.
+ * HWMOD_INIT_NO_RESET should be removed ASAP.
+ */
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+ HWMOD_NO_IDLEST),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 3,
+ .module_bit = OMAP24XX_EN_GPMC_MASK,
+ .module_offs = CORE_MOD,
+ },
+ },
+};
+
+/* RNG */
+
+static struct omap_hwmod_class_sysconfig omap2_rng_sysc = {
+ .rev_offs = 0x3c,
+ .sysc_offs = 0x40,
+ .syss_offs = 0x44,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2_rng_hwmod_class = {
+ .name = "rng",
+ .sysc = &omap2_rng_sysc,
+};
+
+static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = {
+ { .irq = 52 },
+ { .irq = -1 }
+};
+
+struct omap_hwmod omap2xxx_rng_hwmod = {
+ .name = "rng",
+ .mpu_irqs = omap2_rng_mpu_irqs,
+ .main_clk = "l4_ck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 4,
+ .module_bit = OMAP24XX_EN_RNG_SHIFT,
+ .idlest_reg_id = 4,
+ .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT,
+ },
+ },
+ /*
+ * XXX The first read from the SYSSTATUS register of the RNG
+ * after the SYSCONFIG SOFTRESET bit is set triggers an
+ * imprecise external abort. It's unclear why this happens.
+ * Until this is analyzed, skip the IP block reset.
+ */
+ .flags = HWMOD_INIT_NO_RESET,
+ .class = &omap2_rng_hwmod_class,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 94b38af..2857772 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -27,6 +27,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat/dmtimer.h>
+#include <plat/iommu.h>
#include "am35xx.h"
@@ -92,8 +93,14 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
};
/* MPU */
+static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = {
+ { .name = "pmu", .irq = 3 },
+ { .irq = -1 }
+};
+
static struct omap_hwmod omap3xxx_mpu_hwmod = {
.name = "mpu",
+ .mpu_irqs = omap3xxx_mpu_irqs,
.class = &mpu_hwmod_class,
.main_clk = "arm_fck",
};
@@ -123,6 +130,24 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
},
};
+/*
+ * 'debugss' class
+ * debug and emulation sub system
+ */
+
+static struct omap_hwmod_class omap3xxx_debugss_hwmod_class = {
+ .name = "debugss",
+};
+
+/* debugss */
+static struct omap_hwmod omap3xxx_debugss_hwmod = {
+ .name = "debugss",
+ .class = &omap3xxx_debugss_hwmod_class,
+ .clkdm_name = "emu_clkdm",
+ .main_clk = "emu_src_ck",
+ .flags = HWMOD_NO_IDLEST,
+};
+
/* timer class */
static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
.rev_offs = 0x0000,
@@ -170,6 +195,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
.timer_capability = OMAP_TIMER_HAS_PWM,
};
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
+/* pwm timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod = {
.name = "timer1",
@@ -253,6 +288,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -270,6 +306,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -287,6 +324,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -304,7 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
+ .dev_attr = &capability_dsp_pwm_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
};
@@ -2033,6 +2071,33 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
.class = &omap2_hdq1w_class,
};
+/* SAD2D */
+static struct omap_hwmod_rst_info omap3xxx_sad2d_resets[] = {
+ { .name = "rst_modem_pwron_sw", .rst_shift = 0 },
+ { .name = "rst_modem_sw", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_class omap3xxx_sad2d_class = {
+ .name = "sad2d",
+};
+
+static struct omap_hwmod omap3xxx_sad2d_hwmod = {
+ .name = "sad2d",
+ .rst_lines = omap3xxx_sad2d_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap3xxx_sad2d_resets),
+ .main_clk = "sad2d_ick",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT,
+ },
+ },
+ .class = &omap3xxx_sad2d_class,
+};
+
/*
* '32K sync counter' class
* 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
@@ -2068,6 +2133,49 @@ static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
};
/*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_gpmc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = {
+ .name = "gpmc",
+ .sysc = &omap3xxx_gpmc_sysc,
+};
+
+static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = {
+ { .irq = 20 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_gpmc_hwmod = {
+ .name = "gpmc",
+ .class = &omap3xxx_gpmc_hwmod_class,
+ .clkdm_name = "core_l3_clkdm",
+ .mpu_irqs = omap3xxx_gpmc_irqs,
+ .main_clk = "gpmc_fck",
+ /*
+ * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+ * block. It is not being added due to any known bugs with
+ * resetting the GPMC IP block, but rather because any timings
+ * set by the bootloader are not being correctly programmed by
+ * the kernel from the board file or DT data.
+ * HWMOD_INIT_NO_RESET should be removed ASAP.
+ */
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+ HWMOD_NO_IDLEST),
+};
+
+/*
* interfaces
*/
@@ -2102,6 +2210,23 @@ static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
.user = OCP_USER_MPU,
};
+static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = {
+ {
+ .pa_start = 0x54000000,
+ .pa_end = 0x547fffff,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l3 -> debugss */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_debugss_hwmod,
+ .addr = omap3xxx_l4_emu_addrs,
+ .user = OCP_USER_MPU,
+};
+
/* DSS -> l3 */
static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = {
.master = &omap3430es1_dss_core_hwmod,
@@ -2137,6 +2262,14 @@ static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
.user = OCP_USER_MPU,
};
+/* l3_core -> sad2d interface */
+static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
+ .master = &omap3xxx_sad2d_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
+};
+
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.master = &omap3xxx_l4_core_hwmod,
@@ -2823,6 +2956,122 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/*
+ * 'mmu' class
+ * The memory management unit performs virtual to physical address translation
+ * for its requestors.
+ */
+
+static struct omap_hwmod_class_sysconfig mmu_sysc = {
+ .rev_offs = 0x000,
+ .sysc_offs = 0x010,
+ .syss_offs = 0x014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
+ .name = "mmu",
+ .sysc = &mmu_sysc,
+};
+
+/* mmu isp */
+
+static struct omap_mmu_dev_attr mmu_isp_dev_attr = {
+ .da_start = 0x0,
+ .da_end = 0xfffff000,
+ .nr_tlb_entries = 8,
+};
+
+static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
+static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = {
+ { .irq = 24 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = {
+ {
+ .pa_start = 0x480bd400,
+ .pa_end = 0x480bd47f,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_core -> mmu isp */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_mmu_isp_hwmod,
+ .addr = omap3xxx_mmu_isp_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
+ .name = "mmu_isp",
+ .class = &omap3xxx_mmu_hwmod_class,
+ .mpu_irqs = omap3xxx_mmu_isp_irqs,
+ .main_clk = "cam_ick",
+ .dev_attr = &mmu_isp_dev_attr,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+
+/* mmu iva */
+
+static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
+ .da_start = 0x11000000,
+ .da_end = 0xfffff000,
+ .nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
+static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = {
+ { .irq = 28 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
+ { .name = "mmu", .rst_shift = 1, .st_shift = 9 },
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = {
+ {
+ .pa_start = 0x5d000000,
+ .pa_end = 0x5d00007f,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l3_main -> iva mmu */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_mmu_iva_hwmod,
+ .addr = omap3xxx_mmu_iva_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
+ .name = "mmu_iva",
+ .class = &omap3xxx_mmu_hwmod_class,
+ .mpu_irqs = omap3xxx_mmu_iva_irqs,
+ .rst_lines = omap3xxx_mmu_iva_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets),
+ .main_clk = "iva2_ck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430_IVA2_MOD,
+ },
+ },
+ .dev_attr = &mmu_iva_dev_attr,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+#endif
+
/* l4_per -> gpio4 */
static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
{
@@ -3168,6 +3417,15 @@ static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
{ }
};
+static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = {
+ {
+ .pa_start = 0x6e000000,
+ .pa_end = 0x6e000fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_counter_32k_hwmod,
@@ -3277,10 +3535,19 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__emac = {
.user = OCP_USER_MPU,
};
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_gpmc_hwmod,
+ .clk = "core_l3_ick",
+ .addr = omap3xxx_gpmc_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3_main__l4_core,
&omap3xxx_l3_main__l4_per,
&omap3xxx_mpu__l3_main,
+ &omap3xxx_l3_main__l4_debugss,
&omap3xxx_l4_core__l4_wkup,
&omap3xxx_l4_core__mmc3,
&omap3_l4_core__uart1,
@@ -3322,6 +3589,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap34xx_l4_core__mcspi3,
&omap34xx_l4_core__mcspi4,
&omap3xxx_l4_wkup__counter_32k,
+ &omap3xxx_l3_main__gpmc,
NULL,
};
@@ -3371,6 +3639,11 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
&omap34xx_l4_core__sr2,
&omap3xxx_l4_core__mailbox,
&omap3xxx_l4_core__hdq1w,
+ &omap3xxx_sad2d__l3,
+ &omap3xxx_l4_core__mmu_isp,
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+ &omap3xxx_l3_main__mmu_iva,
+#endif
NULL
};
@@ -3391,6 +3664,11 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
&omap3xxx_l4_core__hdq1w,
+ &omap3xxx_sad2d__l3,
+ &omap3xxx_l4_core__mmu_isp,
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+ &omap3xxx_l3_main__mmu_iva,
+#endif
NULL
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index c7dcb60..8d7a935 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,6 +30,7 @@
#include <plat/mmc.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
+#include <plat/iommu.h>
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
@@ -202,6 +203,9 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = {
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
+ .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
},
},
};
@@ -258,6 +262,11 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
.name = "mpu_private",
.class = &omap44xx_mpu_bus_hwmod_class,
.clkdm_name = "mpuss_clkdm",
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/*
@@ -342,6 +351,7 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
.omap4 = {
.clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
+ .lostcontext_mask = OMAP4430_LOSTCONTEXT_DFF_MASK,
.modulemode = MODULEMODE_SWCTRL,
},
},
@@ -446,6 +456,11 @@ static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = {
.class = &omap44xx_ctrl_module_hwmod_class,
.clkdm_name = "l4_cfg_clkdm",
.mpu_irqs = omap44xx_ctrl_module_core_irqs,
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* ctrl_module_pad_core */
@@ -453,6 +468,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = {
.name = "ctrl_module_pad_core",
.class = &omap44xx_ctrl_module_hwmod_class,
.clkdm_name = "l4_cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* ctrl_module_wkup */
@@ -460,6 +480,11 @@ static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = {
.name = "ctrl_module_wkup",
.class = &omap44xx_ctrl_module_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* ctrl_module_pad_wkup */
@@ -467,6 +492,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = {
.name = "ctrl_module_pad_wkup",
.class = &omap44xx_ctrl_module_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/*
@@ -611,7 +641,6 @@ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = {
static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
{ .name = "dsp", .rst_shift = 0 },
- { .name = "mmu_cache", .rst_shift = 1 },
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1323,6 +1352,14 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
.name = "gpmc",
.class = &omap44xx_gpmc_hwmod_class,
.clkdm_name = "l3_2_clkdm",
+ /*
+ * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+ * block. It is not being added due to any known bugs with
+ * resetting the GPMC IP block, but rather because any timings
+ * set by the bootloader are not being correctly programmed by
+ * the kernel from the board file or DT data.
+ * HWMOD_INIT_NO_RESET should be removed ASAP.
+ */
.flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
.mpu_irqs = omap44xx_gpmc_irqs,
.sdma_reqs = omap44xx_gpmc_sdma_reqs,
@@ -1631,7 +1668,6 @@ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = {
static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
{ .name = "cpu0", .rst_shift = 0 },
{ .name = "cpu1", .rst_shift = 1 },
- { .name = "mmu_cache", .rst_shift = 2 },
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2438,6 +2474,137 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = {
};
/*
+ * 'mmu' class
+ * The memory management unit performs virtual to physical address translation
+ * for its requestors.
+ */
+
+static struct omap_hwmod_class_sysconfig mmu_sysc = {
+ .rev_offs = 0x000,
+ .sysc_offs = 0x010,
+ .syss_offs = 0x014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
+ .name = "mmu",
+ .sysc = &mmu_sysc,
+};
+
+/* mmu ipu */
+
+static struct omap_mmu_dev_attr mmu_ipu_dev_attr = {
+ .da_start = 0x0,
+ .da_end = 0xfffff000,
+ .nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
+static struct omap_hwmod_irq_info omap44xx_mmu_ipu_irqs[] = {
+ { .irq = 100 + OMAP44XX_IRQ_GIC_START, },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
+ { .name = "mmu_cache", .rst_shift = 2 },
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = {
+ {
+ .pa_start = 0x55082000,
+ .pa_end = 0x550820ff,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l3_main_2 -> mmu_ipu */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_mmu_ipu_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_mmu_ipu_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
+ .name = "mmu_ipu",
+ .class = &omap44xx_mmu_hwmod_class,
+ .clkdm_name = "ducati_clkdm",
+ .mpu_irqs = omap44xx_mmu_ipu_irqs,
+ .rst_lines = omap44xx_mmu_ipu_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_ipu_resets),
+ .main_clk = "ducati_clk_mux_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
+ .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+ .dev_attr = &mmu_ipu_dev_attr,
+};
+
+/* mmu dsp */
+
+static struct omap_mmu_dev_attr mmu_dsp_dev_attr = {
+ .da_start = 0x0,
+ .da_end = 0xfffff000,
+ .nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
+static struct omap_hwmod_irq_info omap44xx_mmu_dsp_irqs[] = {
+ { .irq = 28 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
+ { .name = "mmu_cache", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = {
+ {
+ .pa_start = 0x4a066000,
+ .pa_end = 0x4a0660ff,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
+};
+
+/* l4_cfg -> dsp */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_mmu_dsp_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmu_dsp_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
+ .name = "mmu_dsp",
+ .class = &omap44xx_mmu_hwmod_class,
+ .clkdm_name = "tesla_clkdm",
+ .mpu_irqs = omap44xx_mmu_dsp_irqs,
+ .rst_lines = omap44xx_mmu_dsp_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_dsp_resets),
+ .main_clk = "dpll_iva_m4x2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
+ .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
+ .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+ .dev_attr = &mmu_dsp_dev_attr,
+};
+
+/*
* 'mpu' class
* mpu sub-system
*/
@@ -2448,6 +2615,8 @@ static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
/* mpu */
static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
+ { .name = "pmu0", .irq = 54 + OMAP44XX_IRQ_GIC_START },
+ { .name = "pmu1", .irq = 55 + OMAP44XX_IRQ_GIC_START },
{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
{ .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
{ .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
@@ -2497,19 +2666,27 @@ static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
* protocol
*/
+static struct omap_hwmod_class_sysconfig omap44xx_ocp2scp_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
.name = "ocp2scp",
+ .sysc = &omap44xx_ocp2scp_sysc,
};
/* ocp2scp_usb_phy */
-static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
- { .role = "phy_48m", .clk = "ocp2scp_usb_phy_phy_48m" },
-};
-
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
.class = &omap44xx_ocp2scp_hwmod_class,
.clkdm_name = "l3_init_clkdm",
+ .main_clk = "ocp2scp_usb_phy_phy_48m",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
@@ -2517,8 +2694,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
- .opt_clks = ocp2scp_usb_phy_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
@@ -2536,18 +2711,36 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
.name = "prcm_mpu",
.class = &omap44xx_prcm_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_NO_IDLEST,
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* cm_core_aon */
static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
.name = "cm_core_aon",
.class = &omap44xx_prcm_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* cm_core */
static struct omap_hwmod omap44xx_cm_core_hwmod = {
.name = "cm_core",
.class = &omap44xx_prcm_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/* prm */
@@ -2583,6 +2776,11 @@ static struct omap_hwmod omap44xx_scrm_hwmod = {
.name = "scrm",
.class = &omap44xx_scrm_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .prcm = {
+ .omap4 = {
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
};
/*
@@ -2901,6 +3099,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
.timer_capability = OMAP_TIMER_HAS_PWM,
};
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
+/* pwm timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
{ .irq = 37 + OMAP44XX_IRQ_GIC_START },
@@ -3005,6 +3213,7 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
};
/* timer6 */
@@ -3027,6 +3236,7 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
};
/* timer7 */
@@ -3048,6 +3258,7 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_dsp_dev_attr,
};
/* timer8 */
@@ -3069,7 +3280,7 @@ static struct omap_hwmod omap44xx_timer8_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_pwm_dev_attr,
+ .dev_attr = &capability_dsp_pwm_dev_attr,
};
/* timer9 */
@@ -5262,11 +5473,21 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_addr_space omap44xx_ocp2scp_usb_phy_addrs[] = {
+ {
+ .pa_start = 0x4a0ad000,
+ .pa_end = 0x4a0ad01f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
/* l4_cfg -> ocp2scp_usb_phy */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_ocp2scp_usb_phy_hwmod,
.clk = "l4_div_ck",
+ .addr = omap44xx_ocp2scp_usb_phy_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@@ -5886,7 +6107,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
{
.pa_start = 0x4a0ab000,
- .pa_end = 0x4a0ab003,
+ .pa_end = 0x4a0ab7ff,
.flags = ADDR_TYPE_RT
},
{
@@ -6097,6 +6318,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__mmc3,
&omap44xx_l4_per__mmc4,
&omap44xx_l4_per__mmc5,
+ &omap44xx_l3_main_2__mmu_ipu,
+ &omap44xx_l4_cfg__mmu_dsp,
&omap44xx_l3_main_2__ocmc_ram,
&omap44xx_l4_cfg__ocp2scp_usb_phy,
&omap44xx_mpu_private__prcm_mpu,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index dddb677..2bc8f17 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -2,9 +2,8 @@
* omap_hwmod_common_data.h - OMAP hwmod common macros and declarations
*
* Copyright (C) 2010-2011 Nokia Corporation
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
* Paul Walmsley
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
* Benoît Cousson
*
* This program is free software; you can redistribute it and/or modify
@@ -77,6 +76,8 @@ extern struct omap_hwmod omap2xxx_gpio4_hwmod;
extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
extern struct omap_hwmod omap2xxx_counter_32k_hwmod;
+extern struct omap_hwmod omap2xxx_gpmc_hwmod;
+extern struct omap_hwmod omap2xxx_rng_hwmod;
/* Common interface data across OMAP2xxx */
extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
@@ -103,6 +104,7 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;
/* Common IP block data */
extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 939bd6f..abefbc4 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -80,7 +80,8 @@ static void __init omap2_init_processor_devices(void)
int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
{
- if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
+ !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
atomic_read(&clkdm->usecount) == 0)
@@ -188,7 +189,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
goto exit;
}
- freq = clk->rate;
+ freq = clk_get_rate(clk);
clk_put(clk);
rcu_read_lock();
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
new file mode 100644
index 0000000..2a79176
--- /dev/null
+++ b/arch/arm/mach-omap2/pmu.c
@@ -0,0 +1,95 @@
+/*
+ * OMAP2 ARM Performance Monitoring Unit (PMU) Support
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Contacts:
+ * Jon Hunter <jon-hunter@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/pm_runtime.h>
+
+#include <asm/pmu.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+
+static char *omap2_pmu_oh_names[] = {"mpu"};
+static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
+static char *omap4430_pmu_oh_names[] = {"l3_main_3", "l3_instr", "debugss"};
+static struct platform_device *omap_pmu_dev;
+
+/**
+ * omap2_init_pmu - creates and registers PMU platform device
+ * @oh_num: Number of OMAP HWMODs required to create PMU device
+ * @oh_names: Array of OMAP HWMODS names required to create PMU device
+ *
+ * Uses OMAP HWMOD framework to create and register an ARM PMU device
+ * from a list of HWMOD names passed. Currently supports OMAP2, OMAP3
+ * and OMAP4 devices.
+ */
+static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
+{
+ int i;
+ struct omap_hwmod *oh[3];
+ char *dev_name = "arm-pmu";
+
+ if ((!oh_num) || (oh_num > 3))
+ return -EINVAL;
+
+ for (i = 0; i < oh_num; i++) {
+ oh[i] = omap_hwmod_lookup(oh_names[i]);
+ if (!oh[i]) {
+ pr_err("Could not look up %s hwmod\n", oh_names[i]);
+ return -ENODEV;
+ }
+ }
+
+ omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0,
+ NULL, 0, 0);
+ WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
+ dev_name);
+
+ if (IS_ERR(omap_pmu_dev))
+ return PTR_ERR(omap_pmu_dev);
+
+ pm_runtime_enable(&omap_pmu_dev->dev);
+
+ return 0;
+}
+
+static int __init omap_init_pmu(void)
+{
+ unsigned oh_num;
+ char **oh_names;
+
+ /*
+ * To create an ARM-PMU device the following HWMODs
+ * are required for the various OMAP2+ devices.
+ *
+ * OMAP24xx: mpu
+ * OMAP3xxx: mpu, debugss
+ * OMAP4430: l3_main_3, l3_instr, debugss
+ * OMAP4460/70: mpu, debugss
+ */
+ if (cpu_is_omap443x()) {
+ oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
+ oh_names = omap4430_pmu_oh_names;
+ /* XXX Remove the next two lines when CTI driver available */
+ pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
+ return 0;
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
+ oh_names = omap3_pmu_oh_names;
+ } else {
+ oh_num = ARRAY_SIZE(omap2_pmu_oh_names);
+ oh_names = omap2_pmu_oh_names;
+ }
+
+ return omap2_init_pmu(oh_num, oh_names);
+}
+subsys_initcall(omap_init_pmu);
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index aeac6f3..aceb4f4 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -1,7 +1,7 @@
/*
* OMAP4 powerdomain control
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
@@ -151,6 +151,34 @@ static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
return v;
}
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
@@ -179,6 +207,35 @@ static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
return v;
}
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
@@ -217,9 +274,11 @@ struct pwrdm_ops omap4_pwrdm_operations = {
.pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
.pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
+ .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
.pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
.pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
.pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
.pwrdm_wait_transition = omap4_pwrdm_wait_transition,
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index e5f0503..72df974 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -109,6 +109,8 @@
#define OMAP2430_EN_MDM_INTC_MASK (1 << 11)
#define OMAP2430_EN_USBHS_SHIFT 6
#define OMAP2430_EN_USBHS_MASK (1 << 6)
+#define OMAP24XX_EN_GPMC_SHIFT 1
+#define OMAP24XX_EN_GPMC_MASK (1 << 1)
/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
#define OMAP2420_ST_MMC_SHIFT 26
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index eaac83d..b5efc0f 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
/*
* Setup MBUS dram target info.
*/
- orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 073c7d79..b3eb3da 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -42,12 +42,12 @@
****************************************************************************/
static struct map_desc orion5x_io_desc[] __initdata = {
{
- .virtual = ORION5X_REGS_VIRT_BASE,
+ .virtual = (unsigned long) ORION5X_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
.length = ORION5X_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = ORION5X_PCIE_WA_VIRT_BASE,
+ .virtual = (unsigned long) ORION5X_PCIE_WA_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
.length = ORION5X_PCIE_WA_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0e19db6..e533588 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -701,7 +701,7 @@ static void __init dns323_init(void)
* Note: AFAIK, rev B1 needs the same treatement but I'll let
* somebody else test it.
*/
- writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+ writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
break;
}
}
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 11a3c1e..461fd69 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -13,27 +13,27 @@
#include <mach/orion5x.h>
-#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
+#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100)
-#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
+#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
-#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
#define WDT_RESET_OUT_EN 0x0002
-#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
-#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110)
-#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C)
#define WDT_INT_REQ 0x0008
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
+#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200)
-#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
+#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204)
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300)
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300)
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 1b60131..d265f54 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -37,7 +37,7 @@
* fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
****************************************************************************/
#define ORION5X_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_VIRT_BASE 0xfe000000
+#define ORION5X_REGS_VIRT_BASE IOMEM(0xfe000000)
#define ORION5X_REGS_SIZE SZ_1M
#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
@@ -53,7 +53,7 @@
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000
+#define ORION5X_PCIE_WA_VIRT_BASE IOMEM(0xfd000000)
#define ORION5X_PCIE_WA_SIZE SZ_16M
#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -66,42 +66,42 @@
* Orion Registers Map
******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
-#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000)
+#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500)
+#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000)
+#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x))
#define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100)
-#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
-#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
+#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000)
-#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000)
-#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000)
-#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000)
+#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000)
-#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900)
+#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900)
-#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000)
+#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000)
-#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000)
+#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000)
-#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
+#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000)
-#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000)
+#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000)
/*******************************************************************************
* Device Bus Registers
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e152641..30a192b 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -25,11 +26,11 @@ static int __initdata gpio0_irqs[4] = {
void __init orion5x_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
+ orion_irq_init(0, MAIN_IRQ_MASK);
/*
* Initialize gpiolib for GPIOs 0-31.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
IRQ_ORION5X_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 6921d49..cd50e32 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -38,7 +38,7 @@
/*****************************************************************************
* PCIe controller
****************************************************************************/
-#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+#define PCIE_BASE (ORION5X_PCIE_VIRT_BASE)
void __init orion5x_pcie_id(u32 *dev, u32 *rev)
{
@@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
}
- ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+ ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE,
bus, devfn, where, size, val);
return ret;
@@ -188,7 +188,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
/*****************************************************************************
* PCI controller
****************************************************************************/
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x))
#define PCI_MODE ORION5X_PCI_REG(0xd00)
#define PCI_CMD ORION5X_PCI_REG(0xc00)
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 706b7e2..9d7ac20 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -312,33 +312,6 @@ void clk_enable_init_clocks(void)
}
}
-/**
- * omap_clk_get_by_name - locate OMAP struct clk by its name
- * @name: name of the struct clk to locate
- *
- * Locate an OMAP struct clk by its name. Assumes that struct clk
- * names are unique. Returns NULL if not found or a pointer to the
- * struct clk if found.
- */
-struct clk *omap_clk_get_by_name(const char *name)
-{
- struct clk *c;
- struct clk *ret = NULL;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(c, &clocks, node) {
- if (!strcmp(c->name, name)) {
- ret = c;
- break;
- }
- }
-
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
int omap_clk_enable_autoidle_all(void)
{
struct clk *c;
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 656b986..e2e2d04 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -19,6 +19,11 @@ struct module;
struct clk;
struct clockdomain;
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
/**
* struct clkops - some clock function pointers
* @enable: fn ptr that enables the current clock in hardware
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 19e7fa5..85868e9 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -60,6 +60,7 @@
#define OMAP_TIMER_ALWON 0x40000000
#define OMAP_TIMER_HAS_PWM 0x20000000
#define OMAP_TIMER_NEEDS_RESET 0x10000000
+#define OMAP_TIMER_HAS_DSP_IRQ 0x08000000
struct omap_timer_capability_dev_attr {
u32 timer_capability;
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 88be3e6..68b5f03 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -103,6 +103,19 @@ struct iommu_functions {
ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
};
+/**
+ * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
+ * @da_start: device address where the va space starts.
+ * @da_end: device address where the va space ends.
+ * @nr_tlb_entries: number of entries supported by the translation
+ * look-aside buffer (TLB).
+ */
+struct omap_mmu_dev_attr {
+ u32 da_start;
+ u32 da_end;
+ int nr_tlb_entries;
+};
+
struct iommu_platform_data {
const char *name;
const char *clk_name;
@@ -126,6 +139,7 @@ struct omap_iommu_arch_data {
struct omap_iommu *iommu_dev;
};
+#ifdef CONFIG_IOMMU_API
/**
* dev_to_omap_iommu() - retrieves an omap iommu object from a user device
* @dev: iommu client device
@@ -136,6 +150,7 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
return arch_data->iommu_dev;
}
+#endif
/* IOMMU errors */
#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index e7259c0..106f506 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -120,6 +120,10 @@ int omap_device_get_context_loss_count(struct platform_device *pdev);
/* Other */
+int omap_device_assert_hardreset(struct platform_device *pdev,
+ const char *name);
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+ const char *name);
int omap_device_idle_hwmods(struct omap_device *od);
int omap_device_enable_hwmods(struct omap_device *od);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0533073..b3349f7 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -2,7 +2,7 @@
* omap_hwmod macros, structures
*
* Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -384,21 +384,38 @@ struct omap_hwmod_omap2_prcm {
u8 idlest_stdby_bit;
};
+/*
+ * Possible values for struct omap_hwmod_omap4_prcm.flags
+ *
+ * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
+ * module-level context loss register associated with them; this
+ * flag bit should be set in those cases
+ */
+#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
* @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
* @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
+ * @flags: PRCM register capabilities for this IP block
+ *
+ * If @lostcontext_mask is not defined, context loss check code uses
+ * whole register without masking. @lostcontext_mask should only be
+ * defined in cases where @context_offs register is shared by two or
+ * more hwmods.
*/
struct omap_hwmod_omap4_prcm {
u16 clkctrl_offs;
u16 rstctrl_offs;
u16 rstst_offs;
u16 context_offs;
+ u32 lostcontext_mask;
u8 submodule_wkdep_bit;
u8 modulemode;
+ u8 flags;
};
@@ -591,9 +608,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
int __init omap_hwmod_setup_one(const char *name);
int omap_hwmod_enable(struct omap_hwmod *oh);
-int _omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
-int _omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
@@ -627,11 +642,6 @@ int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
-
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index d5f617c..cee85a5 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -261,10 +261,10 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
return;
}
- r = omap_clk_get_by_name(clk_name);
+ r = clk_get(NULL, clk_name);
if (IS_ERR(r)) {
dev_err(&od->pdev->dev,
- "omap_clk_get_by_name for %s failed\n", clk_name);
+ "clk_get for %s failed\n", clk_name);
return;
}
@@ -983,6 +983,61 @@ int omap_device_shutdown(struct platform_device *pdev)
}
/**
+ * omap_device_assert_hardreset - set a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Set the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev. All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work. Passes along the return value
+ * of omap_hwmod_assert_hardreset() in the event of any failure, or
+ * returns 0 upon success.
+ */
+int omap_device_assert_hardreset(struct platform_device *pdev, const char *name)
+{
+ struct omap_device *od = to_omap_device(pdev);
+ int ret = 0;
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ ret = omap_hwmod_assert_hardreset(od->hwmods[i], name);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * omap_device_deassert_hardreset - release a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Release the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev. All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work. Passes along the return
+ * value of omap_hwmod_deassert_hardreset() in the event of any
+ * failure, or returns 0 upon success.
+ */
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+ const char *name)
+{
+ struct omap_device *od = to_omap_device(pdev);
+ int ret = 0;
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/**
* omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
* @od: struct omap_device *
*
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index c20ce0f..a82cecb 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -1,10 +1,10 @@
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o
-obj-m :=
-obj-n :=
-obj- :=
+obj-y += addr-map.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
+obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index 367ca89..a7b8060 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
static void __init __iomem *
orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
{
- return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+ return cfg->bridge_virt_base + (win << 4);
}
/*
@@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
* Setup MBUS dram target info.
*/
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const u32 ddr_window_cpu_base)
+ const void __iomem *ddr_window_cpu_base)
{
- void __iomem *addr;
int i;
int cs;
orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- addr = (void __iomem *)ddr_window_cpu_base;
-
for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+ u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 87f53ca..b8a688c 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -86,13 +86,13 @@ static void __init uart_complete(
struct platform_device *orion_uart,
struct plat_serial8250_port *data,
struct resource *resources,
- unsigned int membase,
+ void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
{
data->mapbase = mapbase;
- data->membase = (void __iomem *)membase;
+ data->membase = membase;
data->irq = irq;
data->uartclk = uart_get_clk_rate(clk);
orion_uart->dev.platform_data = data;
@@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = {
.id = PLAT8250_DEV_PLATFORM,
};
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = {
.id = PLAT8250_DEV_PLATFORM1,
};
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = {
.id = PLAT8250_DEV_PLATFORM2,
};
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
@@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = {
.id = 3,
};
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk)
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
index fd556f7..ec63e4a 100644
--- a/arch/arm/plat-orion/include/plat/addr-map.h
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info;
struct orion_addr_map_cfg {
const int num_wins; /* Total number of windows */
const int remappable_wins;
- const u32 bridge_virt_base;
+ void __iomem *bridge_virt_base;
/* If NULL, the default cpu_win_can_remap will be used, using
the value in remappable_wins */
@@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
const u8 attr, const int remap);
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const u32 ddr_window_cpu_base);
+ const void __iomem *ddr_window_cpu_base);
#endif
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index ae2377e..6bbc3fe 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -13,22 +13,22 @@
struct dsa_platform_data;
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
resource_size_t mapbase,
unsigned int irq,
struct clk *clk);
diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h
index 723adce..254552f 100644
--- a/arch/arm/plat-orion/include/plat/mpp.h
+++ b/arch/arm/plat-orion/include/plat/mpp.h
@@ -29,6 +29,6 @@
#define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1)
void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
- unsigned int mpp_max, unsigned int dev_bus);
+ unsigned int mpp_max, void __iomem *dev_bus);
#endif
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
index 4d5f1f6..07527e4 100644
--- a/arch/arm/plat-orion/include/plat/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -11,9 +11,9 @@
#ifndef __PLAT_TIME_H
#define __PLAT_TIME_H
-void orion_time_set_base(u32 timer_base);
+void orion_time_set_base(void __iomem *timer_base);
-void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
+void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk);
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7740bb3..e686fe76 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -18,15 +18,15 @@
#include <plat/mpp.h>
/* Address of the ith MPP control register */
-static __init unsigned long mpp_ctrl_addr(unsigned int i,
- unsigned long dev_bus)
+static __init void __iomem *mpp_ctrl_addr(unsigned int i,
+ void __iomem *dev_bus)
{
return dev_bus + (i) * 4;
}
void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
- unsigned int mpp_max, unsigned int dev_bus)
+ unsigned int mpp_max, void __iomem *dev_bus)
{
unsigned int mpp_nr_regs = (1 + mpp_max/8);
u32 mpp_ctrl[mpp_nr_regs];
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 1ed8d13..0f4fa86 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = {
};
void __init
-orion_time_set_base(u32 _timer_base)
+orion_time_set_base(void __iomem *_timer_base)
{
- timer_base = (void __iomem *)_timer_base;
+ timer_base = _timer_base;
}
void __init
-orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk)
{
u32 u;
@@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Set SoC-specific data.
*/
- bridge_base = (void __iomem *)_bridge_base;
+ bridge_base = _bridge_base;
bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
ticks_per_jiffy = (tclk + HZ/2) / HZ;
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 4fbdceb..a5effd8 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -18,11 +18,12 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/random.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/hw_random.h>
#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <asm/io.h>
@@ -46,26 +47,36 @@
#define RNG_SYSSTATUS 0x44 /* System status
[0] = RESETDONE */
-static void __iomem *rng_base;
-static struct clk *rng_ick;
-static struct platform_device *rng_dev;
+/**
+ * struct omap_rng_private_data - RNG IP block-specific data
+ * @base: virtual address of the beginning of the RNG IP block registers
+ * @mem_res: struct resource * for the IP block registers physical memory
+ */
+struct omap_rng_private_data {
+ void __iomem *base;
+ struct resource *mem_res;
+};
-static inline u32 omap_rng_read_reg(int reg)
+static inline u32 omap_rng_read_reg(struct omap_rng_private_data *priv, int reg)
{
- return __raw_readl(rng_base + reg);
+ return __raw_readl(priv->base + reg);
}
-static inline void omap_rng_write_reg(int reg, u32 val)
+static inline void omap_rng_write_reg(struct omap_rng_private_data *priv,
+ int reg, u32 val)
{
- __raw_writel(val, rng_base + reg);
+ __raw_writel(val, priv->base + reg);
}
static int omap_rng_data_present(struct hwrng *rng, int wait)
{
+ struct omap_rng_private_data *priv;
int data, i;
+ priv = (struct omap_rng_private_data *)rng->priv;
+
for (i = 0; i < 20; i++) {
- data = omap_rng_read_reg(RNG_STAT_REG) ? 0 : 1;
+ data = omap_rng_read_reg(priv, RNG_STAT_REG) ? 0 : 1;
if (data || !wait)
break;
/* RNG produces data fast enough (2+ MBit/sec, even
@@ -80,9 +91,13 @@ static int omap_rng_data_present(struct hwrng *rng, int wait)
static int omap_rng_data_read(struct hwrng *rng, u32 *data)
{
- *data = omap_rng_read_reg(RNG_OUT_REG);
+ struct omap_rng_private_data *priv;
+
+ priv = (struct omap_rng_private_data *)rng->priv;
+
+ *data = omap_rng_read_reg(priv, RNG_OUT_REG);
- return 4;
+ return sizeof(u32);
}
static struct hwrng omap_rng_ops = {
@@ -93,69 +108,68 @@ static struct hwrng omap_rng_ops = {
static int __devinit omap_rng_probe(struct platform_device *pdev)
{
- struct resource *res;
+ struct omap_rng_private_data *priv;
int ret;
- /*
- * A bit ugly, and it will never actually happen but there can
- * be only one RNG and this catches any bork
- */
- if (rng_dev)
- return -EBUSY;
-
- if (cpu_is_omap24xx()) {
- rng_ick = clk_get(&pdev->dev, "ick");
- if (IS_ERR(rng_ick)) {
- dev_err(&pdev->dev, "Could not get rng_ick\n");
- ret = PTR_ERR(rng_ick);
- return ret;
- } else
- clk_enable(rng_ick);
- }
+ priv = kzalloc(sizeof(struct omap_rng_private_data), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "could not allocate memory\n");
+ return -ENOMEM;
+ };
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ omap_rng_ops.priv = (unsigned long)priv;
+ dev_set_drvdata(&pdev->dev, priv);
- rng_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!rng_base) {
+ priv->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!priv->mem_res) {
+ ret = -ENOENT;
+ goto err_ioremap;
+ }
+
+ priv->base = devm_request_and_ioremap(&pdev->dev, priv->mem_res);
+ if (!priv->base) {
ret = -ENOMEM;
goto err_ioremap;
}
- dev_set_drvdata(&pdev->dev, res);
+ dev_set_drvdata(&pdev->dev, priv);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
ret = hwrng_register(&omap_rng_ops);
if (ret)
goto err_register;
dev_info(&pdev->dev, "OMAP Random Number Generator ver. %02x\n",
- omap_rng_read_reg(RNG_REV_REG));
- omap_rng_write_reg(RNG_MASK_REG, 0x1);
+ omap_rng_read_reg(priv, RNG_REV_REG));
- rng_dev = pdev;
+ omap_rng_write_reg(priv, RNG_MASK_REG, 0x1);
return 0;
err_register:
- rng_base = NULL;
+ priv->base = NULL;
+ pm_runtime_disable(&pdev->dev);
err_ioremap:
- if (cpu_is_omap24xx()) {
- clk_disable(rng_ick);
- clk_put(rng_ick);
- }
+ kfree(priv);
+
return ret;
}
static int __exit omap_rng_remove(struct platform_device *pdev)
{
+ struct omap_rng_private_data *priv = dev_get_drvdata(&pdev->dev);
+
hwrng_unregister(&omap_rng_ops);
- omap_rng_write_reg(RNG_MASK_REG, 0x0);
+ omap_rng_write_reg(priv, RNG_MASK_REG, 0x0);
- if (cpu_is_omap24xx()) {
- clk_disable(rng_ick);
- clk_put(rng_ick);
- }
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ release_mem_region(priv->mem_res->start, resource_size(priv->mem_res));
- rng_base = NULL;
+ kfree(priv);
return 0;
}
@@ -164,13 +178,21 @@ static int __exit omap_rng_remove(struct platform_device *pdev)
static int omap_rng_suspend(struct device *dev)
{
- omap_rng_write_reg(RNG_MASK_REG, 0x0);
+ struct omap_rng_private_data *priv = dev_get_drvdata(dev);
+
+ omap_rng_write_reg(priv, RNG_MASK_REG, 0x0);
+ pm_runtime_put_sync(dev);
+
return 0;
}
static int omap_rng_resume(struct device *dev)
{
- omap_rng_write_reg(RNG_MASK_REG, 0x1);
+ struct omap_rng_private_data *priv = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+ omap_rng_write_reg(priv, RNG_MASK_REG, 0x1);
+
return 0;
}
@@ -198,9 +220,6 @@ static struct platform_driver omap_rng_driver = {
static int __init omap_rng_init(void)
{
- if (!cpu_is_omap16xx() && !cpu_is_omap24xx())
- return -ENODEV;
-
return platform_driver_register(&omap_rng_driver);
}
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index 21c1a87..24ccae4 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -19,6 +19,9 @@
#include <linux/clk.h>
#include <crypto/internal/hash.h>
#include <crypto/sha.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
#include "mv_cesa.h"
@@ -1062,7 +1065,10 @@ static int mv_probe(struct platform_device *pdev)
goto err_unmap_reg;
}
- irq = platform_get_irq(pdev, 0);
+ if (pdev->dev.of_node)
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq < 0 || irq == NO_IRQ) {
ret = irq;
goto err_unmap_sram;
@@ -1170,12 +1176,19 @@ static int mv_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id mv_cesa_of_match_table[] = {
+ { .compatible = "marvell,orion-crypto", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mv_cesa_of_match_table);
+
static struct platform_driver marvell_crypto = {
.probe = mv_probe,
- .remove = mv_remove,
+ .remove = __devexit_p(mv_remove),
.driver = {
.owner = THIS_MODULE,
.name = "mv_crypto",
+ .of_match_table = of_match_ptr(mv_cesa_of_match_table),
},
};
MODULE_ALIAS("platform:mv_crypto");
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index aa73ef3..d055cee 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -150,6 +150,12 @@ config GPIO_MSM_V2
Qualcomm MSM chips. Most of the pins on the MSM can be
selected for GPIO, and are controlled by this driver.
+config GPIO_MVEBU
+ def_bool y
+ depends on ARCH_MVEBU
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
config GPIO_MXC
def_bool y
depends on ARCH_MXC
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b2c109d..9aeed67 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
+obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
new file mode 100644
index 0000000..902af43
--- /dev/null
+++ b/drivers/gpio/gpio-mvebu.c
@@ -0,0 +1,679 @@
+/*
+ * GPIO driver for Marvell SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver is a fairly straightforward GPIO driver for the
+ * complete family of Marvell EBU SoC platforms (Orion, Dove,
+ * Kirkwood, Discovery, Armada 370/XP). The only complexity of this
+ * driver is the different register layout that exists between the
+ * non-SMP platforms (Orion, Dove, Kirkwood, Armada 370) and the SMP
+ * platforms (MV78200 from the Discovery family and the Armada
+ * XP). Therefore, this driver handles three variants of the GPIO
+ * block:
+ * - the basic variant, called "orion-gpio", with the simplest
+ * register set. Used on Orion, Dove, Kirkwoord, Armada 370 and
+ * non-SMP Discovery systems
+ * - the mv78200 variant for MV78200 Discovery systems. This variant
+ * turns the edge mask and level mask registers into CPU0 edge
+ * mask/level mask registers, and adds CPU1 edge mask/level mask
+ * registers.
+ * - the armadaxp variant for Armada XP systems. This variant keeps
+ * the normal cause/edge mask/level mask registers when the global
+ * interrupts are used, but adds per-CPU cause/edge mask/level mask
+ * registers n a separate memory area for the per-CPU GPIO
+ * interrupts.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+
+/*
+ * GPIO unit register offsets.
+ */
+#define GPIO_OUT_OFF 0x0000
+#define GPIO_IO_CONF_OFF 0x0004
+#define GPIO_BLINK_EN_OFF 0x0008
+#define GPIO_IN_POL_OFF 0x000c
+#define GPIO_DATA_IN_OFF 0x0010
+#define GPIO_EDGE_CAUSE_OFF 0x0014
+#define GPIO_EDGE_MASK_OFF 0x0018
+#define GPIO_LEVEL_MASK_OFF 0x001c
+
+/* The MV78200 has per-CPU registers for edge mask and level mask */
+#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
+#define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C)
+
+/* The Armada XP has per-CPU registers for interrupt cause, interrupt
+ * mask and interrupt level mask. Those are relative to the
+ * percpu_membase. */
+#define GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu) ((cpu) * 0x4)
+#define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4)
+#define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4)
+
+#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
+#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
+#define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3
+
+#define MVEBU_MAX_GPIO_PER_BANK 32
+
+struct mvebu_gpio_chip {
+ struct gpio_chip chip;
+ spinlock_t lock;
+ void __iomem *membase;
+ void __iomem *percpu_membase;
+ unsigned int irqbase;
+ struct irq_domain *domain;
+ int soc_variant;
+};
+
+/*
+ * Functions returning addresses of individual registers for a given
+ * GPIO controller.
+ */
+static inline void __iomem *mvebu_gpioreg_out(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_OUT_OFF;
+}
+
+static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_IO_CONF_OFF;
+}
+
+static inline void __iomem *mvebu_gpioreg_in_pol(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_IN_POL_OFF;
+}
+
+static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_DATA_IN_OFF;
+}
+
+static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip)
+{
+ int cpu;
+
+ switch(mvchip->soc_variant) {
+ case MVEBU_GPIO_SOC_VARIANT_ORION:
+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
+ return mvchip->membase + GPIO_EDGE_CAUSE_OFF;
+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+ cpu = smp_processor_id();
+ return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
+ default:
+ BUG();
+ }
+}
+
+static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip)
+{
+ int cpu;
+
+ switch(mvchip->soc_variant) {
+ case MVEBU_GPIO_SOC_VARIANT_ORION:
+ return mvchip->membase + GPIO_EDGE_MASK_OFF;
+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
+ cpu = smp_processor_id();
+ return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu);
+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+ cpu = smp_processor_id();
+ return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
+ default:
+ BUG();
+ }
+}
+
+static void __iomem *mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip)
+{
+ int cpu;
+
+ switch(mvchip->soc_variant) {
+ case MVEBU_GPIO_SOC_VARIANT_ORION:
+ return mvchip->membase + GPIO_LEVEL_MASK_OFF;
+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
+ cpu = smp_processor_id();
+ return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu);
+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+ cpu = smp_processor_id();
+ return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
+ default:
+ BUG();
+ }
+}
+
+/*
+ * Functions implementing the gpio_chip methods
+ */
+
+int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+ return pinctrl_request_gpio(chip->base + pin);
+}
+
+void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
+{
+ pinctrl_free_gpio(chip->base + pin);
+}
+
+static void mvebu_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ unsigned long flags;
+ u32 u;
+
+ spin_lock_irqsave(&mvchip->lock, flags);
+ u = readl_relaxed(mvebu_gpioreg_out(mvchip));
+ if (value)
+ u |= 1 << pin;
+ else
+ u &= ~(1 << pin);
+ writel_relaxed(u, mvebu_gpioreg_out(mvchip));
+ spin_unlock_irqrestore(&mvchip->lock, flags);
+}
+
+static int mvebu_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ u32 u;
+
+ if (readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin)) {
+ u = readl_relaxed(mvebu_gpioreg_data_in(mvchip)) ^
+ readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+ } else {
+ u = readl_relaxed(mvebu_gpioreg_out(mvchip));
+ }
+
+ return (u >> pin) & 1;
+}
+
+static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ unsigned long flags;
+ int ret;
+ u32 u;
+
+ /* Check with the pinctrl driver whether this pin is usable as
+ * an input GPIO */
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&mvchip->lock, flags);
+ u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
+ u |= 1 << pin;
+ writel_relaxed(u, mvebu_gpioreg_io_conf(mvchip));
+ spin_unlock_irqrestore(&mvchip->lock, flags);
+
+ return 0;
+}
+
+static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ unsigned long flags;
+ int ret;
+ u32 u;
+
+ /* Check with the pinctrl driver whether this pin is usable as
+ * an output GPIO */
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&mvchip->lock, flags);
+ u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
+ u &= ~(1 << pin);
+ writel_relaxed(u, mvebu_gpioreg_io_conf(mvchip));
+ spin_unlock_irqrestore(&mvchip->lock, flags);
+
+ return 0;
+}
+
+static int mvebu_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ return irq_create_mapping(mvchip->domain, pin);
+}
+
+/*
+ * Functions implementing the irq_chip methods
+ */
+static void mvebu_gpio_irq_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ u32 mask = ~(1 << (d->irq - gc->irq_base));
+
+ irq_gc_lock(gc);
+ writel_relaxed(mask, mvebu_gpioreg_edge_cause(mvchip));
+ irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_edge_irq_mask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache &= ~mask;
+ writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+ irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_edge_irq_unmask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache |= mask;
+ writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+ irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_level_irq_mask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache &= ~mask;
+ writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+ irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_level_irq_unmask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ u32 mask = 1 << (d->irq - gc->irq_base);
+
+ irq_gc_lock(gc);
+ gc->mask_cache |= mask;
+ writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+ irq_gc_unlock(gc);
+}
+
+/*****************************************************************************
+ * MVEBU GPIO IRQ
+ *
+ * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ * Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
+ * Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ * the polarity to catch the next line transaction.
+ * This is a race condition that might not perfectly
+ * work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ * EDGE cause mask
+ * data-in /--------| |-----| |----\
+ * -----| |----- ---- to main cause reg
+ * X \----------------| |----/
+ * polarity LEVEL mask
+ *
+ ****************************************************************************/
+
+static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+ struct mvebu_gpio_chip *mvchip = gc->private;
+ int pin;
+ u32 u;
+
+ pin = d->hwirq;
+
+ u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin);
+ if (!u) {
+ return -EINVAL;
+ }
+
+ type &= IRQ_TYPE_SENSE_MASK;
+ if (type == IRQ_TYPE_NONE)
+ return -EINVAL;
+
+ /* Check if we need to change chip and handler */
+ if (!(ct->type & type))
+ if (irq_setup_alt_chip(d, type))
+ return -EINVAL;
+
+ /*
+ * Configure interrupt polarity.
+ */
+ switch(type) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_LEVEL_HIGH:
+ u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+ u &= ~(1 << pin);
+ writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_LEVEL_LOW:
+ u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+ u |= 1 << pin;
+ writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ case IRQ_TYPE_EDGE_BOTH: {
+ u32 v;
+
+ v = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)) ^
+ readl_relaxed(mvebu_gpioreg_data_in(mvchip));
+
+ /*
+ * set initial polarity based on current input level
+ */
+ u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+ if (v & (1 << pin))
+ u |= 1 << pin; /* falling */
+ else
+ u &= ~(1 << pin); /* rising */
+ writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip));
+ }
+ }
+ return 0;
+}
+
+static void mvebu_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct mvebu_gpio_chip *mvchip = irq_get_handler_data(irq);
+ u32 cause, type;
+ int i;
+
+ if (mvchip == NULL)
+ return;
+
+ cause = readl_relaxed(mvebu_gpioreg_data_in(mvchip)) &
+ readl_relaxed(mvebu_gpioreg_level_mask(mvchip));
+ cause |= readl_relaxed(mvebu_gpioreg_edge_cause(mvchip)) &
+ readl_relaxed(mvebu_gpioreg_edge_mask(mvchip));
+
+ for (i = 0; i < mvchip->chip.ngpio; i++) {
+ int irq;
+
+ irq = mvchip->irqbase + i;
+
+ if (!(cause & (1 << i)))
+ continue;
+
+ type = irqd_get_trigger_type(irq_get_irq_data(irq));
+ if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ /* Swap polarity (race with GPIO line) */
+ u32 polarity;
+
+ polarity = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+ polarity ^= 1 << i;
+ writel_relaxed(polarity, mvebu_gpioreg_in_pol(mvchip));
+ }
+ generic_handle_irq(irq);
+ }
+}
+
+static struct platform_device_id mvebu_gpio_ids[] = {
+ {
+ .name = "orion-gpio",
+ }, {
+ .name = "mv78200-gpio",
+ }, {
+ .name = "armadaxp-gpio",
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(platform, mvebu_gpio_ids);
+
+static struct of_device_id mvebu_gpio_of_match[] __devinitdata = {
+ {
+ .compatible = "marvell,orion-gpio",
+ .data = (void*) MVEBU_GPIO_SOC_VARIANT_ORION,
+ },
+ {
+ .compatible = "marvell,mv78200-gpio",
+ .data = (void*) MVEBU_GPIO_SOC_VARIANT_MV78200,
+ },
+ {
+ .compatible = "marvell,armadaxp-gpio",
+ .data = (void*) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
+ },
+ {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, mvebu_gpio_of_match);
+
+static int __devinit mvebu_gpio_probe(struct platform_device *pdev)
+{
+ struct mvebu_gpio_chip *mvchip;
+ const struct of_device_id *match;
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int ngpios;
+ int soc_variant;
+ int i, cpu, id;
+
+ match = of_match_device(mvebu_gpio_of_match, &pdev->dev);
+ if (match)
+ soc_variant = (int) match->data;
+ else
+ soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (! res) {
+ dev_err(&pdev->dev, "Cannot get memory resource\n");
+ return -ENODEV;
+ }
+
+ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL);
+ if (! mvchip){
+ dev_err(&pdev->dev, "Cannot allocate memory\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) {
+ dev_err(&pdev->dev, "Missing ngpios OF property\n");
+ return -ENODEV;
+ }
+
+ id = of_alias_get_id(pdev->dev.of_node, "gpio");
+ if (id < 0) {
+ dev_err(&pdev->dev, "Couldn't get OF id\n");
+ return id;
+ }
+
+ mvchip->soc_variant = soc_variant;
+ mvchip->chip.label = dev_name(&pdev->dev);
+ mvchip->chip.dev = &pdev->dev;
+ mvchip->chip.request = mvebu_gpio_request;
+ mvchip->chip.direction_input = mvebu_gpio_direction_input;
+ mvchip->chip.get = mvebu_gpio_get;
+ mvchip->chip.direction_output = mvebu_gpio_direction_output;
+ mvchip->chip.set = mvebu_gpio_set;
+ mvchip->chip.to_irq = mvebu_gpio_to_irq;
+ mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK;
+ mvchip->chip.ngpio = ngpios;
+ mvchip->chip.can_sleep = 0;
+#ifdef CONFIG_OF
+ mvchip->chip.of_node = np;
+#endif
+
+ spin_lock_init(&mvchip->lock);
+ mvchip->membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (! mvchip->membase) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ kfree(mvchip->chip.label);
+ return -ENOMEM;
+ }
+
+ /* The Armada XP has a second range of registers for the
+ * per-CPU registers */
+ if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (! res) {
+ dev_err(&pdev->dev, "Cannot get memory resource\n");
+ kfree(mvchip->chip.label);
+ return -ENODEV;
+ }
+
+ mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (! mvchip->percpu_membase) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ kfree(mvchip->chip.label);
+ return -ENOMEM;
+ }
+ }
+
+ /*
+ * Mask and clear GPIO interrupts.
+ */
+ switch(soc_variant) {
+ case MVEBU_GPIO_SOC_VARIANT_ORION:
+ writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF);
+ writel_relaxed(0, mvchip->membase + GPIO_EDGE_MASK_OFF);
+ writel_relaxed(0, mvchip->membase + GPIO_LEVEL_MASK_OFF);
+ break;
+ case MVEBU_GPIO_SOC_VARIANT_MV78200:
+ writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF);
+ for (cpu = 0; cpu < 2; cpu++) {
+ writel_relaxed(0, mvchip->membase +
+ GPIO_EDGE_MASK_MV78200_OFF(cpu));
+ writel_relaxed(0, mvchip->membase +
+ GPIO_LEVEL_MASK_MV78200_OFF(cpu));
+ }
+ break;
+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+ writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF);
+ writel_relaxed(0, mvchip->membase + GPIO_EDGE_MASK_OFF);
+ writel_relaxed(0, mvchip->membase + GPIO_LEVEL_MASK_OFF);
+ for (cpu = 0; cpu < 4; cpu++) {
+ writel_relaxed(0, mvchip->percpu_membase +
+ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu));
+ writel_relaxed(0, mvchip->percpu_membase +
+ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu));
+ writel_relaxed(0, mvchip->percpu_membase +
+ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu));
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ gpiochip_add(&mvchip->chip);
+
+ /* Some gpio controllers do not provide irq support */
+ if (!of_irq_count(np))
+ return 0;
+
+ /* Setup the interrupt handlers. Each chip can have up to 4
+ * interrupt handlers, with each handler dealing with 8 GPIO
+ * pins. */
+ for (i = 0; i < 4; i++) {
+ int irq;
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0)
+ continue;
+ irq_set_handler_data(irq, mvchip);
+ irq_set_chained_handler(irq, mvebu_gpio_irq_handler);
+ }
+
+ mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1);
+ if (mvchip->irqbase < 0) {
+ dev_err(&pdev->dev, "no irqs\n");
+ kfree(mvchip->chip.label);
+ return -ENOMEM;
+ }
+
+ gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase,
+ mvchip->membase, handle_level_irq);
+ if (! gc) {
+ dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n");
+ kfree(mvchip->chip.label);
+ return -ENOMEM;
+ }
+
+ gc->private = mvchip;
+ ct = &gc->chip_types[0];
+ ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+ ct->chip.irq_mask = mvebu_gpio_level_irq_mask;
+ ct->chip.irq_unmask = mvebu_gpio_level_irq_unmask;
+ ct->chip.irq_set_type = mvebu_gpio_irq_set_type;
+ ct->chip.name = mvchip->chip.label;
+
+ ct = &gc->chip_types[1];
+ ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ ct->chip.irq_ack = mvebu_gpio_irq_ack;
+ ct->chip.irq_mask = mvebu_gpio_edge_irq_mask;
+ ct->chip.irq_unmask = mvebu_gpio_edge_irq_unmask;
+ ct->chip.irq_set_type = mvebu_gpio_irq_set_type;
+ ct->handler = handle_edge_irq;
+ ct->chip.name = mvchip->chip.label;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
+
+ /* Setup irq domain on top of the generic chip. */
+ mvchip->domain = irq_domain_add_legacy(np, mvchip->chip.ngpio,
+ mvchip->irqbase, 0,
+ &irq_domain_simple_ops,
+ mvchip);
+ if (!mvchip->domain) {
+ dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n",
+ mvchip->chip.label);
+ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
+ IRQ_LEVEL | IRQ_NOPROBE);
+ kfree(gc);
+ kfree(mvchip->chip.label);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct platform_driver mvebu_gpio_driver = {
+ .driver = {
+ .name = "mvebu-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = mvebu_gpio_of_match,
+ },
+ .probe = mvebu_gpio_probe,
+ .id_table = mvebu_gpio_ids,
+};
+
+static int __init mvebu_gpio_init(void)
+{
+ return platform_driver_register(&mvebu_gpio_driver);
+}
+postcore_initcall(mvebu_gpio_init);
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 2f4b01b..36509ae 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -31,6 +31,8 @@
#include <linux/hwmon.h>
#include <linux/gpio.h>
#include <linux/gpio-fan.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
struct gpio_fan_data {
struct platform_device *pdev;
@@ -400,14 +402,131 @@ static ssize_t show_name(struct device *dev,
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+#ifdef CONFIG_OF_GPIO
+/*
+ * Translate OpenFirmware node properties into platform_data
+ */
+static int gpio_fan_get_of_pdata(struct device *dev,
+ struct gpio_fan_platform_data *pdata)
+{
+ struct device_node *node;
+ struct gpio_fan_speed *speed;
+ unsigned *ctrl;
+ unsigned i;
+ u32 u;
+ struct property *prop;
+ const __be32 *p;
+
+ node = dev->of_node;
+
+ /* Fill GPIO pin array */
+ pdata->num_ctrl = of_gpio_count(node);
+ if (!pdata->num_ctrl) {
+ dev_err(dev, "gpios DT property empty / missing");
+ return -ENODEV;
+ }
+ ctrl = devm_kzalloc(dev, pdata->num_ctrl * sizeof(unsigned),
+ GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+ for (i = 0; i < pdata->num_ctrl; i++) {
+ int val;
+
+ val = of_get_gpio(node, i);
+ if (val < 0)
+ return val;
+ ctrl[i] = val;
+ }
+ pdata->ctrl = ctrl;
+
+ /* Get number of RPM/ctrl_val pairs in speed map */
+ prop = of_find_property(node, "gpio-fan,speed-map", &i);
+ if (!prop) {
+ dev_err(dev, "gpio-fan,speed-map DT property missing");
+ return -ENODEV;
+ }
+ i = i / sizeof(u32);
+ if (i == 0 || i & 1) {
+ dev_err(dev, "gpio-fan,speed-map contains zero/odd number of entries");
+ return -ENODEV;
+ }
+ pdata->num_speed = i / 2;
+
+ /*
+ * Populate speed map
+ * Speed map is in the form <RPM ctrl_val RPM ctrl_val ...>
+ * this needs splitting into pairs to create gpio_fan_speed structs
+ */
+ speed = devm_kzalloc(dev,
+ pdata->num_speed * sizeof(struct gpio_fan_speed),
+ GFP_KERNEL);
+ if (!speed)
+ return -ENOMEM;
+ p = NULL;
+ for (i = 0; i < pdata->num_speed; i++) {
+ p = of_prop_next_u32(prop, p, &u);
+ if (!p)
+ return -ENODEV;
+ speed[i].rpm = u;
+ p = of_prop_next_u32(prop, p, &u);
+ if (!p)
+ return -ENODEV;
+ speed[i].ctrl_val = u;
+ }
+ pdata->speed = speed;
+
+ /* Alarm GPIO if one exists */
+ if (of_gpio_named_count(node, "alarm-gpios")) {
+ struct gpio_fan_alarm *alarm;
+ int val;
+ enum of_gpio_flags flags;
+
+ alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
+ GFP_KERNEL);
+ if (!alarm)
+ return -ENOMEM;
+
+ val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
+ if (val < 0)
+ return val;
+ alarm->gpio = val;
+ alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ pdata->alarm = alarm;
+ }
+
+ return 0;
+}
+
+static struct of_device_id of_gpio_fan_match[] __devinitdata = {
+ { .compatible = "gpio-fan", },
+ {},
+};
+#endif /* CONFIG_OF_GPIO */
+
static int __devinit gpio_fan_probe(struct platform_device *pdev)
{
int err;
struct gpio_fan_data *fan_data;
struct gpio_fan_platform_data *pdata = pdev->dev.platform_data;
+#ifdef CONFIG_OF_GPIO
+ if (!pdata) {
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct gpio_fan_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ err = gpio_fan_get_of_pdata(&pdev->dev, pdata);
+ if (err)
+ return err;
+ }
+#else /* CONFIG_OF_GPIO */
if (!pdata)
return -EINVAL;
+#endif /* CONFIG_OF_GPIO */
fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
GFP_KERNEL);
@@ -511,6 +630,7 @@ static struct platform_driver gpio_fan_driver = {
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
+ .of_match_table = of_match_ptr(of_gpio_fan_match),
},
};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1ef6e1e..33e3df9 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -175,6 +175,28 @@ config PINCTRL_EXYNOS4
bool "Pinctrl driver data for Exynos4 SoC"
select PINCTRL_SAMSUNG
+config PINCTRL_MVEBU
+ bool
+ depends on ARCH_MVEBU
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_DOVE
+ bool
+ select PINCTRL_MVEBU
+
+config PINCTRL_KIRKWOOD
+ bool
+ select PINCTRL_MVEBU
+
+config PINCTRL_ARMADA_370
+ bool
+ select PINCTRL_MVEBU
+
+config PINCTRL_ARMADA_XP
+ bool
+ select PINCTRL_MVEBU
+
source "drivers/pinctrl/spear/Kconfig"
endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 698527d..f162e01 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -35,5 +35,10 @@ obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o
+obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o
+obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o
+obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
+obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/pinctrl-armada-370.c
new file mode 100644
index 0000000..c907647
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-370.c
@@ -0,0 +1,421 @@
+/*
+ * Marvell Armada 370 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "uart0", "rxd")),
+ MPP_MODE(1,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "uart0", "txd")),
+ MPP_MODE(2,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "i2c0", "sck"),
+ MPP_FUNCTION(0x2, "uart0", "txd")),
+ MPP_MODE(3,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "i2c0", "sda"),
+ MPP_FUNCTION(0x2, "uart0", "rxd")),
+ MPP_MODE(4,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "cpu_pd", "vdd")),
+ MPP_MODE(5,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txclko"),
+ MPP_FUNCTION(0x2, "uart1", "txd"),
+ MPP_FUNCTION(0x4, "spi1", "clk"),
+ MPP_FUNCTION(0x5, "audio", "mclk")),
+ MPP_MODE(6,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd0"),
+ MPP_FUNCTION(0x2, "sata0", "prsnt"),
+ MPP_FUNCTION(0x4, "tdm", "rst"),
+ MPP_FUNCTION(0x5, "audio", "sdo")),
+ MPP_MODE(7,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd1"),
+ MPP_FUNCTION(0x4, "tdm", "tdx"),
+ MPP_FUNCTION(0x5, "audio", "lrclk")),
+ MPP_MODE(8,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd2"),
+ MPP_FUNCTION(0x2, "uart0", "rts"),
+ MPP_FUNCTION(0x4, "tdm", "drx"),
+ MPP_FUNCTION(0x5, "audio", "bclk")),
+ MPP_MODE(9,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd3"),
+ MPP_FUNCTION(0x2, "uart1", "txd"),
+ MPP_FUNCTION(0x3, "sd0", "clk"),
+ MPP_FUNCTION(0x5, "audio", "spdifo")),
+ MPP_MODE(10,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txctl"),
+ MPP_FUNCTION(0x2, "uart0", "cts"),
+ MPP_FUNCTION(0x4, "tdm", "fsync"),
+ MPP_FUNCTION(0x5, "audio", "sdi")),
+ MPP_MODE(11,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd0"),
+ MPP_FUNCTION(0x2, "uart1", "rxd"),
+ MPP_FUNCTION(0x3, "sd0", "cmd"),
+ MPP_FUNCTION(0x4, "spi0", "cs1"),
+ MPP_FUNCTION(0x5, "sata1", "prsnt"),
+ MPP_FUNCTION(0x6, "spi1", "cs1")),
+ MPP_MODE(12,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd1"),
+ MPP_FUNCTION(0x2, "i2c1", "sda"),
+ MPP_FUNCTION(0x3, "sd0", "d0"),
+ MPP_FUNCTION(0x4, "spi1", "cs0"),
+ MPP_FUNCTION(0x5, "audio", "spdifi")),
+ MPP_MODE(13,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd2"),
+ MPP_FUNCTION(0x2, "i2c1", "sck"),
+ MPP_FUNCTION(0x3, "sd0", "d1"),
+ MPP_FUNCTION(0x4, "tdm", "pclk"),
+ MPP_FUNCTION(0x5, "audio", "rmclk")),
+ MPP_MODE(14,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd3"),
+ MPP_FUNCTION(0x2, "pcie", "clkreq0"),
+ MPP_FUNCTION(0x3, "sd0", "d2"),
+ MPP_FUNCTION(0x4, "spi1", "mosi"),
+ MPP_FUNCTION(0x5, "spi0", "cs2")),
+ MPP_MODE(15,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxctl"),
+ MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+ MPP_FUNCTION(0x3, "sd0", "d3"),
+ MPP_FUNCTION(0x4, "spi1", "miso"),
+ MPP_FUNCTION(0x5, "spi0", "cs3")),
+ MPP_MODE(16,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxclk"),
+ MPP_FUNCTION(0x2, "uart1", "rxd"),
+ MPP_FUNCTION(0x4, "tdm", "int"),
+ MPP_FUNCTION(0x5, "audio", "extclk")),
+ MPP_MODE(17,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge", "mdc")),
+ MPP_MODE(18,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge", "mdio")),
+ MPP_MODE(19,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txclk"),
+ MPP_FUNCTION(0x2, "ge1", "txclkout"),
+ MPP_FUNCTION(0x4, "tdm", "pclk")),
+ MPP_MODE(20,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd4"),
+ MPP_FUNCTION(0x2, "ge1", "txd0")),
+ MPP_MODE(21,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd5"),
+ MPP_FUNCTION(0x2, "ge1", "txd1"),
+ MPP_FUNCTION(0x4, "uart1", "txd")),
+ MPP_MODE(22,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd6"),
+ MPP_FUNCTION(0x2, "ge1", "txd2"),
+ MPP_FUNCTION(0x4, "uart0", "rts")),
+ MPP_MODE(23,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "ge0", "txd7"),
+ MPP_FUNCTION(0x2, "ge1", "txd3"),
+ MPP_FUNCTION(0x4, "spi1", "mosi")),
+ MPP_MODE(24,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "col"),
+ MPP_FUNCTION(0x2, "ge1", "txctl"),
+ MPP_FUNCTION(0x4, "spi1", "cs0")),
+ MPP_MODE(25,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxerr"),
+ MPP_FUNCTION(0x2, "ge1", "rxd0"),
+ MPP_FUNCTION(0x4, "uart1", "rxd")),
+ MPP_MODE(26,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "crs"),
+ MPP_FUNCTION(0x2, "ge1", "rxd1"),
+ MPP_FUNCTION(0x4, "spi1", "miso")),
+ MPP_MODE(27,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd4"),
+ MPP_FUNCTION(0x2, "ge1", "rxd2"),
+ MPP_FUNCTION(0x4, "uart0", "cts")),
+ MPP_MODE(28,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd5"),
+ MPP_FUNCTION(0x2, "ge1", "rxd3")),
+ MPP_MODE(29,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd6"),
+ MPP_FUNCTION(0x2, "ge1", "rxctl"),
+ MPP_FUNCTION(0x4, "i2c1", "sda")),
+ MPP_MODE(30,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "ge0", "rxd7"),
+ MPP_FUNCTION(0x2, "ge1", "rxclk"),
+ MPP_FUNCTION(0x4, "i2c1", "sck")),
+ MPP_MODE(31,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x3, "tclk", NULL),
+ MPP_FUNCTION(0x4, "ge0", "txerr")),
+ MPP_MODE(32,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "spi0", "cs0")),
+ MPP_MODE(33,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "bootcs"),
+ MPP_FUNCTION(0x2, "spi0", "cs0")),
+ MPP_MODE(34,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "wen0"),
+ MPP_FUNCTION(0x2, "spi0", "mosi")),
+ MPP_MODE(35,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "oen"),
+ MPP_FUNCTION(0x2, "spi0", "sck")),
+ MPP_MODE(36,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "a1"),
+ MPP_FUNCTION(0x2, "spi0", "miso")),
+ MPP_MODE(37,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "a0"),
+ MPP_FUNCTION(0x2, "sata0", "prsnt")),
+ MPP_MODE(38,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ready"),
+ MPP_FUNCTION(0x2, "uart1", "cts"),
+ MPP_FUNCTION(0x3, "uart0", "cts")),
+ MPP_MODE(39,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad0"),
+ MPP_FUNCTION(0x2, "audio", "spdifo")),
+ MPP_MODE(40,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad1"),
+ MPP_FUNCTION(0x2, "uart1", "rts"),
+ MPP_FUNCTION(0x3, "uart0", "rts")),
+ MPP_MODE(41,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad2"),
+ MPP_FUNCTION(0x2, "uart1", "rxd")),
+ MPP_MODE(42,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad3"),
+ MPP_FUNCTION(0x2, "uart1", "txd")),
+ MPP_MODE(43,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad4"),
+ MPP_FUNCTION(0x2, "audio", "bclk")),
+ MPP_MODE(44,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad5"),
+ MPP_FUNCTION(0x2, "audio", "mclk")),
+ MPP_MODE(45,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad6"),
+ MPP_FUNCTION(0x2, "audio", "lrclk")),
+ MPP_MODE(46,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad7"),
+ MPP_FUNCTION(0x2, "audio", "sdo")),
+ MPP_MODE(47,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad8"),
+ MPP_FUNCTION(0x3, "sd0", "clk"),
+ MPP_FUNCTION(0x5, "audio", "spdifo")),
+ MPP_MODE(48,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad9"),
+ MPP_FUNCTION(0x2, "uart0", "rts"),
+ MPP_FUNCTION(0x3, "sd0", "cmd"),
+ MPP_FUNCTION(0x4, "sata1", "prsnt"),
+ MPP_FUNCTION(0x5, "spi0", "cs1")),
+ MPP_MODE(49,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad10"),
+ MPP_FUNCTION(0x2, "pcie", "clkreq1"),
+ MPP_FUNCTION(0x3, "sd0", "d0"),
+ MPP_FUNCTION(0x4, "spi1", "cs0"),
+ MPP_FUNCTION(0x5, "audio", "spdifi")),
+ MPP_MODE(50,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad11"),
+ MPP_FUNCTION(0x2, "uart0", "cts"),
+ MPP_FUNCTION(0x3, "sd0", "d1"),
+ MPP_FUNCTION(0x4, "spi1", "miso"),
+ MPP_FUNCTION(0x5, "audio", "rmclk")),
+ MPP_MODE(51,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad12"),
+ MPP_FUNCTION(0x2, "i2c1", "sda"),
+ MPP_FUNCTION(0x3, "sd0", "d2"),
+ MPP_FUNCTION(0x4, "spi1", "mosi")),
+ MPP_MODE(52,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad13"),
+ MPP_FUNCTION(0x2, "i2c1", "sck"),
+ MPP_FUNCTION(0x3, "sd0", "d3"),
+ MPP_FUNCTION(0x4, "spi1", "sck")),
+ MPP_MODE(53,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad14"),
+ MPP_FUNCTION(0x2, "sd0", "clk"),
+ MPP_FUNCTION(0x3, "tdm", "pclk"),
+ MPP_FUNCTION(0x4, "spi0", "cs2"),
+ MPP_FUNCTION(0x5, "pcie", "clkreq1")),
+ MPP_MODE(54,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ad15"),
+ MPP_FUNCTION(0x3, "tdm", "dtx")),
+ MPP_MODE(55,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "cs1"),
+ MPP_FUNCTION(0x2, "uart1", "txd"),
+ MPP_FUNCTION(0x3, "tdm", "rst"),
+ MPP_FUNCTION(0x4, "sata1", "prsnt"),
+ MPP_FUNCTION(0x5, "sata0", "prsnt")),
+ MPP_MODE(56,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "cs2"),
+ MPP_FUNCTION(0x2, "uart1", "cts"),
+ MPP_FUNCTION(0x3, "uart0", "cts"),
+ MPP_FUNCTION(0x4, "spi0", "cs3"),
+ MPP_FUNCTION(0x5, "pcie", "clkreq0"),
+ MPP_FUNCTION(0x6, "spi1", "cs1")),
+ MPP_MODE(57,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "cs3"),
+ MPP_FUNCTION(0x2, "uart1", "rxd"),
+ MPP_FUNCTION(0x3, "tdm", "fsync"),
+ MPP_FUNCTION(0x4, "sata0", "prsnt"),
+ MPP_FUNCTION(0x5, "audio", "sdo")),
+ MPP_MODE(58,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "cs0"),
+ MPP_FUNCTION(0x2, "uart1", "rts"),
+ MPP_FUNCTION(0x3, "tdm", "int"),
+ MPP_FUNCTION(0x5, "audio", "extclk"),
+ MPP_FUNCTION(0x6, "uart0", "rts")),
+ MPP_MODE(59,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "ale0"),
+ MPP_FUNCTION(0x2, "uart1", "rts"),
+ MPP_FUNCTION(0x3, "uart0", "rts"),
+ MPP_FUNCTION(0x5, "audio", "bclk")),
+ MPP_MODE(60,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "ale1"),
+ MPP_FUNCTION(0x2, "uart1", "rxd"),
+ MPP_FUNCTION(0x3, "sata0", "prsnt"),
+ MPP_FUNCTION(0x4, "pcie", "rst-out"),
+ MPP_FUNCTION(0x5, "audio", "sdi")),
+ MPP_MODE(61,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "dev", "wen1"),
+ MPP_FUNCTION(0x2, "uart1", "txd"),
+ MPP_FUNCTION(0x5, "audio", "rclk")),
+ MPP_MODE(62,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "dev", "a2"),
+ MPP_FUNCTION(0x2, "uart1", "cts"),
+ MPP_FUNCTION(0x3, "tdm", "drx"),
+ MPP_FUNCTION(0x4, "pcie", "clkreq0"),
+ MPP_FUNCTION(0x5, "audio", "mclk"),
+ MPP_FUNCTION(0x6, "uart0", "cts")),
+ MPP_MODE(63,
+ MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x1, "spi0", "sck"),
+ MPP_FUNCTION(0x2, "tclk", NULL)),
+ MPP_MODE(64,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "spi0", "miso"),
+ MPP_FUNCTION(0x2, "spi0-1", "cs1")),
+ MPP_MODE(65,
+ MPP_FUNCTION(0x0, "gpio", NULL),
+ MPP_FUNCTION(0x1, "spi0", "mosi"),
+ MPP_FUNCTION(0x2, "spi0-1", "cs2")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info;
+
+static struct of_device_id armada_370_pinctrl_of_match[] __devinitdata = {
+ { .compatible = "marvell,mv88f6710-pinctrl" },
+ { },
+};
+
+static struct mvebu_mpp_ctrl mv88f6710_mpp_controls[] = {
+ MPP_REG_CTRL(0, 65),
+};
+
+static struct pinctrl_gpio_range mv88f6710_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 32),
+ MPP_GPIO_RANGE(2, 64, 64, 2),
+};
+
+static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info;
+
+ soc->variant = 0; /* no variants for Armada 370 */
+ soc->controls = mv88f6710_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv88f6710_mpp_controls);
+ soc->modes = mv88f6710_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(mv88f6710_mpp_modes);
+ soc->gpioranges = mv88f6710_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv88f6710_mpp_gpio_ranges);
+
+ pdev->dev.platform_data = soc;
+
+ return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_370_pinctrl_remove(struct platform_device *pdev)
+{
+ return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_370_pinctrl_driver = {
+ .driver = {
+ .name = "armada-370-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(armada_370_pinctrl_of_match),
+ },
+ .probe = armada_370_pinctrl_probe,
+ .remove = __devexit_p(armada_370_pinctrl_remove),
+};
+
+module_platform_driver(armada_370_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada 370 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/pinctrl-armada-xp.c
new file mode 100644
index 0000000..40bd52a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-armada-xp.c
@@ -0,0 +1,468 @@
+/*
+ * Marvell Armada XP pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file supports the three variants of Armada XP SoCs that are
+ * available: mv78230, mv78260 and mv78460. From a pin muxing
+ * perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460
+ * both have 67 MPP pins (more GPIOs and address lines for the memory
+ * bus mainly). The only difference between the mv78260 and the
+ * mv78460 in terms of pin muxing is the addition of two functions on
+ * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two
+ * cores, mv78460 has four cores).
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/bitops.h>
+
+#include "pinctrl-mvebu.h"
+
+enum armada_xp_variant {
+ V_MV78230 = BIT(0),
+ V_MV78260 = BIT(1),
+ V_MV78460 = BIT(2),
+ V_MV78230_PLUS = (V_MV78230 | V_MV78260 | V_MV78460),
+ V_MV78260_PLUS = (V_MV78260 | V_MV78460),
+};
+
+static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txclko", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d0", V_MV78230_PLUS)),
+ MPP_MODE(1,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d1", V_MV78230_PLUS)),
+ MPP_MODE(2,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d2", V_MV78230_PLUS)),
+ MPP_MODE(3,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d3", V_MV78230_PLUS)),
+ MPP_MODE(4,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d4", V_MV78230_PLUS)),
+ MPP_MODE(5,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txctl", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d5", V_MV78230_PLUS)),
+ MPP_MODE(6,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d6", V_MV78230_PLUS)),
+ MPP_MODE(7,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d7", V_MV78230_PLUS)),
+ MPP_MODE(8,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d8", V_MV78230_PLUS)),
+ MPP_MODE(9,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d9", V_MV78230_PLUS)),
+ MPP_MODE(10,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxctl", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d10", V_MV78230_PLUS)),
+ MPP_MODE(11,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxclk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d11", V_MV78230_PLUS)),
+ MPP_MODE(12,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd4", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "clkout", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d12", V_MV78230_PLUS)),
+ MPP_MODE(13,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd5", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "txd0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d13", V_MV78230_PLUS)),
+ MPP_MODE(14,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd6", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "txd1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d14", V_MV78230_PLUS)),
+ MPP_MODE(15,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txd7", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "txd2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d15", V_MV78230_PLUS)),
+ MPP_MODE(16,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "txclk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "txd3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d16", V_MV78230_PLUS)),
+ MPP_MODE(17,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "col", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "txctl", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d17", V_MV78230_PLUS)),
+ MPP_MODE(18,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxerr", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxd0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "ptp", "trig", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d18", V_MV78230_PLUS)),
+ MPP_MODE(19,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "crs", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxd1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "ptp", "evreq", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d19", V_MV78230_PLUS)),
+ MPP_MODE(20,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd4", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxd2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "ptp", "clk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d20", V_MV78230_PLUS)),
+ MPP_MODE(21,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd5", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxd3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "mem", "bat", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d21", V_MV78230_PLUS)),
+ MPP_MODE(22,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd6", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxctl", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "sata0", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d22", V_MV78230_PLUS)),
+ MPP_MODE(23,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ge0", "rxd7", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "ge1", "rxclk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "sata1", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "d23", V_MV78230_PLUS)),
+ MPP_MODE(24,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sata1", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "nf", "bootcs-re", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "rst", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "hsync", V_MV78230_PLUS)),
+ MPP_MODE(25,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sata0", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "nf", "bootcs-we", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "pclk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "vsync", V_MV78230_PLUS)),
+ MPP_MODE(26,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "fsync", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "clk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)),
+ MPP_MODE(27,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ptp", "trig", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "dtx", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "e", V_MV78230_PLUS)),
+ MPP_MODE(28,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ptp", "evreq", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "drx", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "pwm", V_MV78230_PLUS)),
+ MPP_MODE(29,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "ptp", "clk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_MODE(30,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "clk", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int1", V_MV78230_PLUS)),
+ MPP_MODE(31,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "cmd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_MODE(32,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "d0", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)),
+ MPP_MODE(33,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "d1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int4", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "mem", "bat", V_MV78230_PLUS)),
+ MPP_MODE(34,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "d2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sata0", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int5", V_MV78230_PLUS)),
+ MPP_MODE(35,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "sd0", "d3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sata1", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int6", V_MV78230_PLUS)),
+ MPP_MODE(36,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "mosi", V_MV78230_PLUS)),
+ MPP_MODE(37,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "miso", V_MV78230_PLUS)),
+ MPP_MODE(38,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "sck", V_MV78230_PLUS)),
+ MPP_MODE(39,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "cs0", V_MV78230_PLUS)),
+ MPP_MODE(40,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "cs1", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart2", "cts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0", V_MV78230_PLUS)),
+ MPP_MODE(41,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "spi", "cs2", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart2", "rts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "sata1", "prsnt", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "lcd", "vga-vsync", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "pcie", "clkreq1", V_MV78230_PLUS)),
+ MPP_MODE(42,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart2", "rxd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart0", "cts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int7", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "tdm-1", "timer", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_MODE(43,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart2", "txd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "spi", "cs3", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "pcie", "rstout", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd", V_MV78460)),
+ MPP_MODE(44,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart2", "cts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart3", "rxd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "spi", "cs4", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "mem", "bat", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "pcie", "clkreq2", V_MV78230_PLUS)),
+ MPP_MODE(45,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart2", "rts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart3", "txd", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "spi", "cs5", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V_MV78230_PLUS)),
+ MPP_MODE(46,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart3", "rts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "rts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "spi", "cs6", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V_MV78230_PLUS)),
+ MPP_MODE(47,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "uart3", "cts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "cts", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x3, "spi", "cs7", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x4, "ref", "clkout", V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x5, "pcie", "clkreq3", V_MV78230_PLUS)),
+ MPP_MODE(48,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x1, "tclk", NULL, V_MV78230_PLUS),
+ MPP_VAR_FUNCTION(0x2, "dev", "burst/last", V_MV78230_PLUS)),
+ MPP_MODE(49,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "we3", V_MV78260_PLUS)),
+ MPP_MODE(50,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "we2", V_MV78260_PLUS)),
+ MPP_MODE(51,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad16", V_MV78260_PLUS)),
+ MPP_MODE(52,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad17", V_MV78260_PLUS)),
+ MPP_MODE(53,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad18", V_MV78260_PLUS)),
+ MPP_MODE(54,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad19", V_MV78260_PLUS)),
+ MPP_MODE(55,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad20", V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd", V_MV78260_PLUS)),
+ MPP_MODE(56,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad21", V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd", V_MV78260_PLUS)),
+ MPP_MODE(57,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad22", V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd", V_MV78460)),
+ MPP_MODE(58,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad23", V_MV78260_PLUS)),
+ MPP_MODE(59,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad24", V_MV78260_PLUS)),
+ MPP_MODE(60,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad25", V_MV78260_PLUS)),
+ MPP_MODE(61,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad26", V_MV78260_PLUS)),
+ MPP_MODE(62,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad27", V_MV78260_PLUS)),
+ MPP_MODE(63,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad28", V_MV78260_PLUS)),
+ MPP_MODE(64,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad29", V_MV78260_PLUS)),
+ MPP_MODE(65,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad30", V_MV78260_PLUS)),
+ MPP_MODE(66,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad31", V_MV78260_PLUS)),
+};
+
+static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info;
+
+static struct of_device_id armada_xp_pinctrl_of_match[] __devinitdata = {
+ {
+ .compatible = "marvell,mv78230-pinctrl",
+ .data = (void *) V_MV78230,
+ },
+ {
+ .compatible = "marvell,mv78260-pinctrl",
+ .data = (void *) V_MV78260,
+ },
+ {
+ .compatible = "marvell,mv78460-pinctrl",
+ .data = (void *) V_MV78460,
+ },
+ { },
+};
+
+static struct mvebu_mpp_ctrl mv78230_mpp_controls[] = {
+ MPP_REG_CTRL(0, 48),
+};
+
+static struct pinctrl_gpio_range mv78230_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 17),
+};
+
+static struct mvebu_mpp_ctrl mv78260_mpp_controls[] = {
+ MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78260_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 32),
+ MPP_GPIO_RANGE(2, 64, 64, 3),
+};
+
+static struct mvebu_mpp_ctrl mv78460_mpp_controls[] = {
+ MPP_REG_CTRL(0, 66),
+};
+
+static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 32),
+ MPP_GPIO_RANGE(2, 64, 64, 3),
+};
+
+static int __devinit armada_xp_pinctrl_probe(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = &armada_xp_pinctrl_info;
+ const struct of_device_id *match =
+ of_match_device(armada_xp_pinctrl_of_match, &pdev->dev);
+
+ if (!match)
+ return -ENODEV;
+
+ soc->variant = (unsigned) match->data & 0xff;
+
+ switch (soc->variant) {
+ case V_MV78230:
+ soc->controls = mv78230_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv78230_mpp_controls);
+ soc->modes = armada_xp_mpp_modes;
+ /* We don't necessarily want the full list of the
+ * armada_xp_mpp_modes, but only the first 'n' ones
+ * that are available on this SoC */
+ soc->nmodes = mv78230_mpp_controls[0].npins;
+ soc->gpioranges = mv78230_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv78230_mpp_gpio_ranges);
+ break;
+ case V_MV78260:
+ soc->controls = mv78260_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv78260_mpp_controls);
+ soc->modes = armada_xp_mpp_modes;
+ /* We don't necessarily want the full list of the
+ * armada_xp_mpp_modes, but only the first 'n' ones
+ * that are available on this SoC */
+ soc->nmodes = mv78260_mpp_controls[0].npins;
+ soc->gpioranges = mv78260_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv78260_mpp_gpio_ranges);
+ break;
+ case V_MV78460:
+ soc->controls = mv78460_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv78460_mpp_controls);
+ soc->modes = armada_xp_mpp_modes;
+ /* We don't necessarily want the full list of the
+ * armada_xp_mpp_modes, but only the first 'n' ones
+ * that are available on this SoC */
+ soc->nmodes = mv78460_mpp_controls[0].npins;
+ soc->gpioranges = mv78460_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges);
+ break;
+ }
+
+ pdev->dev.platform_data = soc;
+
+ return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit armada_xp_pinctrl_remove(struct platform_device *pdev)
+{
+ return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_xp_pinctrl_driver = {
+ .driver = {
+ .name = "armada-xp-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(armada_xp_pinctrl_of_match),
+ },
+ .probe = armada_xp_pinctrl_probe,
+ .remove = __devexit_p(armada_xp_pinctrl_remove),
+};
+
+module_platform_driver(armada_xp_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada XP pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c
new file mode 100644
index 0000000..ffe74b2
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-dove.c
@@ -0,0 +1,620 @@
+/*
+ * Marvell Dove pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_AU0_AC97_SEL BIT(16)
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_TWSI_ENABLE_OPTION1 BIT(7)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_TWSI_ENABLE_OPTION2 BIT(20)
+#define DOVE_TWSI_ENABLE_OPTION3 BIT(21)
+#define DOVE_TWSI_OPTION3_GPIO BIT(22)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_ON_AU1 BIT(0)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_AU1_SPDIFO_GPIO_EN BIT(1)
+#define DOVE_NAND_GPIO_EN BIT(0)
+#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
+#define DOVE_SPI_GPIO_SEL BIT(5)
+#define DOVE_UART1_GPIO_SEL BIT(4)
+#define DOVE_AU1_GPIO_SEL BIT(3)
+#define DOVE_CAM_GPIO_SEL BIT(2)
+#define DOVE_SD1_GPIO_SEL BIT(1)
+#define DOVE_SD0_GPIO_SEL BIT(0)
+
+#define MPPS_PER_REG 8
+#define MPP_BITS 4
+#define MPP_MASK 0xf
+
+#define CONFIG_PMU BIT(4)
+
+static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+ unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+ unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+ unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+ if (pmu & (1 << ctrl->pid))
+ *config = CONFIG_PMU;
+ else
+ *config = (mpp >> shift) & MPP_MASK;
+ return 0;
+}
+
+static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
+ unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
+ unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+ unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+
+ if (config == CONFIG_PMU)
+ writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+ else {
+ writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
+ mpp &= ~(MPP_MASK << shift);
+ mpp |= config << shift;
+ writel(mpp, DOVE_MPP_VIRT_BASE + off);
+ }
+ return 0;
+}
+
+static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ unsigned long mask;
+
+ switch (ctrl->pid) {
+ case 24: /* mpp_camera */
+ mask = DOVE_CAM_GPIO_SEL;
+ break;
+ case 40: /* mpp_sdio0 */
+ mask = DOVE_SD0_GPIO_SEL;
+ break;
+ case 46: /* mpp_sdio1 */
+ mask = DOVE_SD1_GPIO_SEL;
+ break;
+ case 58: /* mpp_spi0 */
+ mask = DOVE_SPI_GPIO_SEL;
+ break;
+ case 62: /* mpp_uart1 */
+ mask = DOVE_UART1_GPIO_SEL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *config = ((mpp4 & mask) != 0);
+
+ return 0;
+}
+
+static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ unsigned long mask;
+
+ switch (ctrl->pid) {
+ case 24: /* mpp_camera */
+ mask = DOVE_CAM_GPIO_SEL;
+ break;
+ case 40: /* mpp_sdio0 */
+ mask = DOVE_SD0_GPIO_SEL;
+ break;
+ case 46: /* mpp_sdio1 */
+ mask = DOVE_SD1_GPIO_SEL;
+ break;
+ case 58: /* mpp_spi0 */
+ mask = DOVE_SPI_GPIO_SEL;
+ break;
+ case 62: /* mpp_uart1 */
+ mask = DOVE_UART1_GPIO_SEL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mpp4 &= ~mask;
+ if (config)
+ mpp4 |= mask;
+
+ writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+
+ return 0;
+}
+
+static int dove_nand_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+ *config = ((gmpp & DOVE_NAND_GPIO_EN) != 0);
+
+ return 0;
+}
+
+static int dove_nand_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+ gmpp &= ~DOVE_NAND_GPIO_EN;
+ if (config)
+ gmpp |= DOVE_NAND_GPIO_EN;
+
+ writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+
+ return 0;
+}
+
+static int dove_audio0_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+ *config = ((pmu & DOVE_AU0_AC97_SEL) != 0);
+
+ return 0;
+}
+
+static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+ pmu &= ~DOVE_AU0_AC97_SEL;
+ if (config)
+ pmu |= DOVE_AU0_AC97_SEL;
+ writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL);
+
+ return 0;
+}
+
+static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+ unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+ unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ *config = 0;
+ if (mpp4 & DOVE_AU1_GPIO_SEL)
+ *config |= BIT(3);
+ if (sspc1 & DOVE_SSP_ON_AU1)
+ *config |= BIT(2);
+ if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN)
+ *config |= BIT(1);
+ if (gcfg2 & DOVE_TWSI_OPTION3_GPIO)
+ *config |= BIT(0);
+
+ /* SSP/TWSI only if I2S1 not set*/
+ if ((*config & BIT(3)) == 0)
+ *config &= ~(BIT(2) | BIT(0));
+ /* TWSI only if SPDIFO not set*/
+ if ((*config & BIT(1)) == 0)
+ *config &= ~BIT(0);
+ return 0;
+}
+
+static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
+ unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+ unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ if (config & BIT(0))
+ gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
+ if (config & BIT(1))
+ gmpp |= DOVE_AU1_SPDIFO_GPIO_EN;
+ if (config & BIT(2))
+ sspc1 |= DOVE_SSP_ON_AU1;
+ if (config & BIT(3))
+ mpp4 |= DOVE_AU1_GPIO_SEL;
+
+ writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+ writel(sspc1, DOVE_SSP_CTRL_STATUS_1);
+ writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
+ writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+ return 0;
+}
+
+/* mpp[52:57] gpio pins depend heavily on current config;
+ * gpio_req does not try to mux in gpio capabilities to not
+ * break other functions. If you require all mpps as gpio
+ * enforce gpio setting by pinctrl mapping.
+ */
+static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid)
+{
+ unsigned long config;
+
+ dove_audio1_ctrl_get(ctrl, &config);
+
+ switch (config) {
+ case 0x02: /* i2s1 : gpio[56:57] */
+ case 0x0e: /* ssp : gpio[56:57] */
+ if (pid >= 56)
+ return 0;
+ return -ENOTSUPP;
+ case 0x08: /* spdifo : gpio[52:55] */
+ case 0x0b: /* twsi : gpio[52:55] */
+ if (pid <= 55)
+ return 0;
+ return -ENOTSUPP;
+ case 0x0a: /* all gpio */
+ return 0;
+ /* 0x00 : i2s1/spdifo : no gpio */
+ /* 0x0c : ssp/spdifo : no gpio */
+ /* 0x0f : ssp/twsi : no gpio */
+ }
+ return -ENOTSUPP;
+}
+
+/* mpp[52:57] has gpio pins capable of in and out */
+static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid,
+ bool input)
+{
+ if (pid < 52 || pid > 57)
+ return -ENOTSUPP;
+ return 0;
+}
+
+static int dove_twsi_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long *config)
+{
+ unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+ unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ *config = 0;
+ if (gcfg1 & DOVE_TWSI_ENABLE_OPTION1)
+ *config = 1;
+ else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION2)
+ *config = 2;
+ else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION3)
+ *config = 3;
+
+ return 0;
+}
+
+static int dove_twsi_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
+ unsigned long config)
+{
+ unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1);
+ unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ gcfg1 &= ~DOVE_TWSI_ENABLE_OPTION1;
+ gcfg2 &= ~(DOVE_TWSI_ENABLE_OPTION2 | DOVE_TWSI_ENABLE_OPTION2);
+
+ switch (config) {
+ case 1:
+ gcfg1 |= DOVE_TWSI_ENABLE_OPTION1;
+ break;
+ case 2:
+ gcfg2 |= DOVE_TWSI_ENABLE_OPTION2;
+ break;
+ case 3:
+ gcfg2 |= DOVE_TWSI_ENABLE_OPTION3;
+ break;
+ }
+
+ writel(gcfg1, DOVE_GLOBAL_CONFIG_1);
+ writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
+
+ return 0;
+}
+
+static struct mvebu_mpp_ctrl dove_mpp_controls[] = {
+ MPP_FUNC_CTRL(0, 0, "mpp0", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(1, 1, "mpp1", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(2, 2, "mpp2", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(3, 3, "mpp3", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(4, 4, "mpp4", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(5, 5, "mpp5", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(6, 6, "mpp6", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(7, 7, "mpp7", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(8, 8, "mpp8", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(9, 9, "mpp9", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(10, 10, "mpp10", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(11, 11, "mpp11", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(12, 12, "mpp12", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(13, 13, "mpp13", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(14, 14, "mpp14", dove_pmu_mpp_ctrl),
+ MPP_FUNC_CTRL(15, 15, "mpp15", dove_pmu_mpp_ctrl),
+ MPP_REG_CTRL(16, 23),
+ MPP_FUNC_CTRL(24, 39, "mpp_camera", dove_mpp4_ctrl),
+ MPP_FUNC_CTRL(40, 45, "mpp_sdio0", dove_mpp4_ctrl),
+ MPP_FUNC_CTRL(46, 51, "mpp_sdio1", dove_mpp4_ctrl),
+ MPP_FUNC_GPIO_CTRL(52, 57, "mpp_audio1", dove_audio1_ctrl),
+ MPP_FUNC_CTRL(58, 61, "mpp_spi0", dove_mpp4_ctrl),
+ MPP_FUNC_CTRL(62, 63, "mpp_uart1", dove_mpp4_ctrl),
+ MPP_FUNC_CTRL(64, 71, "mpp_nand", dove_nand_ctrl),
+ MPP_FUNC_CTRL(72, 72, "audio0", dove_audio0_ctrl),
+ MPP_FUNC_CTRL(73, 73, "twsi", dove_twsi_ctrl),
+};
+
+static struct mvebu_mpp_mode dove_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart2", "rts"),
+ MPP_FUNCTION(0x03, "sdio0", "cd"),
+ MPP_FUNCTION(0x0f, "lcd0", "pwm"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(1,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart2", "cts"),
+ MPP_FUNCTION(0x03, "sdio0", "wp"),
+ MPP_FUNCTION(0x0f, "lcd1", "pwm"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(2,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "sata", "prsnt"),
+ MPP_FUNCTION(0x02, "uart2", "txd"),
+ MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+ MPP_FUNCTION(0x04, "uart1", "rts"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(3,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "sata", "act"),
+ MPP_FUNCTION(0x02, "uart2", "rxd"),
+ MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+ MPP_FUNCTION(0x04, "uart1", "cts"),
+ MPP_FUNCTION(0x0f, "lcd-spi", "cs1"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(4,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "rts"),
+ MPP_FUNCTION(0x03, "sdio1", "cd"),
+ MPP_FUNCTION(0x04, "spi1", "miso"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(5,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "cts"),
+ MPP_FUNCTION(0x03, "sdio1", "wp"),
+ MPP_FUNCTION(0x04, "spi1", "cs"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(6,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "txd"),
+ MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+ MPP_FUNCTION(0x04, "spi1", "mosi"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(7,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "rxd"),
+ MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+ MPP_FUNCTION(0x04, "spi1", "sck"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(8,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "watchdog", "rstout"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(9,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x05, "pex1", "clkreq"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(10,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x05, "ssp", "sclk"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(11,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "sata", "prsnt"),
+ MPP_FUNCTION(0x02, "sata-1", "act"),
+ MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+ MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+ MPP_FUNCTION(0x05, "pex0", "clkreq"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(12,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "sata", "act"),
+ MPP_FUNCTION(0x02, "uart2", "rts"),
+ MPP_FUNCTION(0x03, "audio0", "extclk"),
+ MPP_FUNCTION(0x04, "sdio1", "cd"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(13,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart2", "cts"),
+ MPP_FUNCTION(0x03, "audio1", "extclk"),
+ MPP_FUNCTION(0x04, "sdio1", "wp"),
+ MPP_FUNCTION(0x05, "ssp", "extclk"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(14,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart2", "txd"),
+ MPP_FUNCTION(0x04, "sdio1", "buspwr"),
+ MPP_FUNCTION(0x05, "ssp", "rxd"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(15,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart2", "rxd"),
+ MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
+ MPP_FUNCTION(0x05, "ssp", "sfrm"),
+ MPP_FUNCTION(0x10, "pmu", NULL)),
+ MPP_MODE(16,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "rts"),
+ MPP_FUNCTION(0x03, "sdio0", "cd"),
+ MPP_FUNCTION(0x04, "lcd-spi", "cs1"),
+ MPP_FUNCTION(0x05, "ac97", "sdi1")),
+ MPP_MODE(17,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "ac97-1", "sysclko"),
+ MPP_FUNCTION(0x02, "uart3", "cts"),
+ MPP_FUNCTION(0x03, "sdio0", "wp"),
+ MPP_FUNCTION(0x04, "twsi", "sda"),
+ MPP_FUNCTION(0x05, "ac97", "sdi2")),
+ MPP_MODE(18,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "txd"),
+ MPP_FUNCTION(0x03, "sdio0", "buspwr"),
+ MPP_FUNCTION(0x04, "lcd0", "pwm"),
+ MPP_FUNCTION(0x05, "ac97", "sdi3")),
+ MPP_MODE(19,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "uart3", "rxd"),
+ MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
+ MPP_FUNCTION(0x04, "twsi", "sck")),
+ MPP_MODE(20,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "ac97", "sysclko"),
+ MPP_FUNCTION(0x02, "lcd-spi", "miso"),
+ MPP_FUNCTION(0x03, "sdio1", "cd"),
+ MPP_FUNCTION(0x05, "sdio0", "cd"),
+ MPP_FUNCTION(0x06, "spi1", "miso")),
+ MPP_MODE(21,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "uart1", "rts"),
+ MPP_FUNCTION(0x02, "lcd-spi", "cs0"),
+ MPP_FUNCTION(0x03, "sdio1", "wp"),
+ MPP_FUNCTION(0x04, "ssp", "sfrm"),
+ MPP_FUNCTION(0x05, "sdio0", "wp"),
+ MPP_FUNCTION(0x06, "spi1", "cs")),
+ MPP_MODE(22,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x01, "uart1", "cts"),
+ MPP_FUNCTION(0x02, "lcd-spi", "mosi"),
+ MPP_FUNCTION(0x03, "sdio1", "buspwr"),
+ MPP_FUNCTION(0x04, "ssp", "txd"),
+ MPP_FUNCTION(0x05, "sdio0", "buspwr"),
+ MPP_FUNCTION(0x06, "spi1", "mosi")),
+ MPP_MODE(23,
+ MPP_FUNCTION(0x00, "gpio", NULL),
+ MPP_FUNCTION(0x02, "lcd-spi", "sck"),
+ MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
+ MPP_FUNCTION(0x04, "ssp", "sclk"),
+ MPP_FUNCTION(0x05, "sdio0", "ledctrl"),
+ MPP_FUNCTION(0x06, "spi1", "sck")),
+ MPP_MODE(24,
+ MPP_FUNCTION(0x00, "camera", NULL),
+ MPP_FUNCTION(0x01, "gpio", NULL)),
+ MPP_MODE(40,
+ MPP_FUNCTION(0x00, "sdio0", NULL),
+ MPP_FUNCTION(0x01, "gpio", NULL)),
+ MPP_MODE(46,
+ MPP_FUNCTION(0x00, "sdio1", NULL),
+ MPP_FUNCTION(0x01, "gpio", NULL)),
+ MPP_MODE(52,
+ MPP_FUNCTION(0x00, "i2s1/spdifo", NULL),
+ MPP_FUNCTION(0x02, "i2s1", NULL),
+ MPP_FUNCTION(0x08, "spdifo", NULL),
+ MPP_FUNCTION(0x0a, "gpio", NULL),
+ MPP_FUNCTION(0x0b, "twsi", NULL),
+ MPP_FUNCTION(0x0c, "ssp/spdifo", NULL),
+ MPP_FUNCTION(0x0e, "ssp", NULL),
+ MPP_FUNCTION(0x0f, "ssp/twsi", NULL)),
+ MPP_MODE(58,
+ MPP_FUNCTION(0x00, "spi0", NULL),
+ MPP_FUNCTION(0x01, "gpio", NULL)),
+ MPP_MODE(62,
+ MPP_FUNCTION(0x00, "uart1", NULL),
+ MPP_FUNCTION(0x01, "gpio", NULL)),
+ MPP_MODE(64,
+ MPP_FUNCTION(0x00, "nand", NULL),
+ MPP_FUNCTION(0x01, "gpo", NULL)),
+ MPP_MODE(72,
+ MPP_FUNCTION(0x00, "i2s", NULL),
+ MPP_FUNCTION(0x01, "ac97", NULL)),
+ MPP_MODE(73,
+ MPP_FUNCTION(0x00, "twsi-none", NULL),
+ MPP_FUNCTION(0x01, "twsi-opt1", NULL),
+ MPP_FUNCTION(0x02, "twsi-opt2", NULL),
+ MPP_FUNCTION(0x03, "twsi-opt3", NULL)),
+};
+
+static struct pinctrl_gpio_range dove_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 32),
+ MPP_GPIO_RANGE(2, 64, 64, 8),
+};
+
+static struct mvebu_pinctrl_soc_info dove_pinctrl_info = {
+ .controls = dove_mpp_controls,
+ .ncontrols = ARRAY_SIZE(dove_mpp_controls),
+ .modes = dove_mpp_modes,
+ .nmodes = ARRAY_SIZE(dove_mpp_modes),
+ .gpioranges = dove_mpp_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(dove_mpp_gpio_ranges),
+ .variant = 0,
+};
+
+static struct clk *clk;
+
+static struct of_device_id dove_pinctrl_of_match[] __devinitdata = {
+ { .compatible = "marvell,dove-pinctrl", .data = &dove_pinctrl_info },
+ { }
+};
+
+static int __devinit dove_pinctrl_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match =
+ of_match_device(dove_pinctrl_of_match, &pdev->dev);
+ pdev->dev.platform_data = match->data;
+
+ /*
+ * General MPP Configuration Register is part of pdma registers.
+ * grab clk to make sure it is ticking.
+ */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+
+ return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit dove_pinctrl_remove(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = mvebu_pinctrl_remove(pdev);
+ if (!IS_ERR(clk))
+ clk_disable_unprepare(clk);
+ return ret;
+}
+
+static struct platform_driver dove_pinctrl_driver = {
+ .driver = {
+ .name = "dove-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(dove_pinctrl_of_match),
+ },
+ .probe = dove_pinctrl_probe,
+ .remove = __devexit_p(dove_pinctrl_remove),
+};
+
+module_platform_driver(dove_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Dove pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c
new file mode 100644
index 0000000..9a74ef6
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-kirkwood.c
@@ -0,0 +1,472 @@
+/*
+ * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core
+ *
+ * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+#define V(f6180, f6190, f6192, f6281, f6282) \
+ ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \
+ (f6281 << 3) | (f6282 << 4))
+
+enum kirkwood_variant {
+ VARIANT_MV88F6180 = V(1, 0, 0, 0, 0),
+ VARIANT_MV88F6190 = V(0, 1, 0, 0, 0),
+ VARIANT_MV88F6192 = V(0, 0, 1, 0, 0),
+ VARIANT_MV88F6281 = V(0, 0, 0, 1, 0),
+ VARIANT_MV88F6282 = V(0, 0, 0, 0, 1),
+};
+
+static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1))),
+ MPP_MODE(1,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1))),
+ MPP_MODE(2,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1))),
+ MPP_MODE(3,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1))),
+ MPP_MODE(4,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0))),
+ MPP_MODE(5,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))),
+ MPP_MODE(6,
+ MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0))),
+ MPP_MODE(7,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))),
+ MPP_MODE(8,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))),
+ MPP_MODE(9,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))),
+ MPP_MODE(10,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0))),
+ MPP_MODE(11,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1))),
+ MPP_MODE(12,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1)),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1))),
+ MPP_MODE(13,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))),
+ MPP_MODE(14,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))),
+ MPP_MODE(15,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1))),
+ MPP_MODE(16,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))),
+ MPP_MODE(17,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1))),
+ MPP_MODE(18,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1))),
+ MPP_MODE(19,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1))),
+ MPP_MODE(20,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0))),
+ MPP_MODE(21,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1))),
+ MPP_MODE(22,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1))),
+ MPP_MODE(23,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1))),
+ MPP_MODE(24,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1))),
+ MPP_MODE(25,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1))),
+ MPP_MODE(26,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1))),
+ MPP_MODE(27,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1))),
+ MPP_MODE(28,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1))),
+ MPP_MODE(29,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1))),
+ MPP_MODE(30,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1))),
+ MPP_MODE(31,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1))),
+ MPP_MODE(32,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1))),
+ MPP_MODE(33,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1))),
+ MPP_MODE(34,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1))),
+ MPP_MODE(35,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1))),
+ MPP_MODE(36,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1))),
+ MPP_MODE(37,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1))),
+ MPP_MODE(38,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1))),
+ MPP_MODE(39,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1))),
+ MPP_MODE(40,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1))),
+ MPP_MODE(41,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1))),
+ MPP_MODE(42,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1))),
+ MPP_MODE(43,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1))),
+ MPP_MODE(44,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1))),
+ MPP_MODE(45,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1))),
+ MPP_MODE(46,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1))),
+ MPP_MODE(47,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))),
+ MPP_MODE(48,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1))),
+ MPP_MODE(49,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1))),
+};
+
+static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = {
+ MPP_REG_CTRL(0, 29),
+};
+
+static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 30),
+};
+
+static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = {
+ MPP_REG_CTRL(0, 35),
+};
+
+static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 4),
+};
+
+static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = {
+ MPP_REG_CTRL(0, 49),
+};
+
+static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+ MPP_GPIO_RANGE(1, 32, 32, 18),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6180_info = {
+ .variant = VARIANT_MV88F6180,
+ .controls = mv88f6180_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f6180_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6190_info = {
+ .variant = VARIANT_MV88F6190,
+ .controls = mv88f619x_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f619x_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6192_info = {
+ .variant = VARIANT_MV88F6192,
+ .controls = mv88f619x_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f619x_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6281_info = {
+ .variant = VARIANT_MV88F6281,
+ .controls = mv88f628x_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f628x_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
+};
+
+static struct mvebu_pinctrl_soc_info mv88f6282_info = {
+ .variant = VARIANT_MV88F6282,
+ .controls = mv88f628x_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f628x_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
+};
+
+static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
+ { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info },
+ { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info },
+ { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info },
+ { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info },
+ { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info },
+ { }
+};
+
+static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match =
+ of_match_device(kirkwood_pinctrl_of_match, &pdev->dev);
+ pdev->dev.platform_data = match->data;
+ return mvebu_pinctrl_probe(pdev);
+}
+
+static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev)
+{
+ return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver kirkwood_pinctrl_driver = {
+ .driver = {
+ .name = "kirkwood-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match),
+ },
+ .probe = kirkwood_pinctrl_probe,
+ .remove = __devexit_p(kirkwood_pinctrl_remove),
+};
+
+module_platform_driver(kirkwood_pinctrl_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/pinctrl-mvebu.c
new file mode 100644
index 0000000..8e6266c
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.c
@@ -0,0 +1,754 @@
+/*
+ * Marvell MVEBU pinctrl core driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "core.h"
+#include "pinctrl-mvebu.h"
+
+#define MPPS_PER_REG 8
+#define MPP_BITS 4
+#define MPP_MASK 0xf
+
+struct mvebu_pinctrl_function {
+ const char *name;
+ const char **groups;
+ unsigned num_groups;
+};
+
+struct mvebu_pinctrl_group {
+ const char *name;
+ struct mvebu_mpp_ctrl *ctrl;
+ struct mvebu_mpp_ctrl_setting *settings;
+ unsigned num_settings;
+ unsigned gid;
+ unsigned *pins;
+ unsigned npins;
+};
+
+struct mvebu_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_desc desc;
+ void __iomem *base;
+ struct mvebu_pinctrl_group *groups;
+ unsigned num_groups;
+ struct mvebu_pinctrl_function *functions;
+ unsigned num_functions;
+ u8 variant;
+};
+
+static struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_pid(
+ struct mvebu_pinctrl *pctl, unsigned pid)
+{
+ unsigned n;
+ for (n = 0; n < pctl->num_groups; n++) {
+ if (pid >= pctl->groups[n].pins[0] &&
+ pid < pctl->groups[n].pins[0] +
+ pctl->groups[n].npins)
+ return &pctl->groups[n];
+ }
+ return NULL;
+}
+
+static struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_name(
+ struct mvebu_pinctrl *pctl, const char *name)
+{
+ unsigned n;
+ for (n = 0; n < pctl->num_groups; n++) {
+ if (strcmp(name, pctl->groups[n].name) == 0)
+ return &pctl->groups[n];
+ }
+ return NULL;
+}
+
+static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_val(
+ struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+ unsigned long config)
+{
+ unsigned n;
+ for (n = 0; n < grp->num_settings; n++) {
+ if (config == grp->settings[n].val) {
+ if (!pctl->variant || (pctl->variant &
+ grp->settings[n].variant))
+ return &grp->settings[n];
+ }
+ }
+ return NULL;
+}
+
+static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_name(
+ struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp,
+ const char *name)
+{
+ unsigned n;
+ for (n = 0; n < grp->num_settings; n++) {
+ if (strcmp(name, grp->settings[n].name) == 0) {
+ if (!pctl->variant || (pctl->variant &
+ grp->settings[n].variant))
+ return &grp->settings[n];
+ }
+ }
+ return NULL;
+}
+
+static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_gpio_setting(
+ struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp)
+{
+ unsigned n;
+ for (n = 0; n < grp->num_settings; n++) {
+ if (grp->settings[n].flags &
+ (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+ if (!pctl->variant || (pctl->variant &
+ grp->settings[n].variant))
+ return &grp->settings[n];
+ }
+ }
+ return NULL;
+}
+
+static struct mvebu_pinctrl_function *mvebu_pinctrl_find_function_by_name(
+ struct mvebu_pinctrl *pctl, const char *name)
+{
+ unsigned n;
+ for (n = 0; n < pctl->num_functions; n++) {
+ if (strcmp(name, pctl->functions[n].name) == 0)
+ return &pctl->functions[n];
+ }
+ return NULL;
+}
+
+/*
+ * Common mpp pin configuration registers on MVEBU are
+ * registers of eight 4-bit values for each mpp setting.
+ * Register offset and bit mask are calculated accordingly below.
+ */
+static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl,
+ struct mvebu_pinctrl_group *grp,
+ unsigned long *config)
+{
+ unsigned pin = grp->gid;
+ unsigned off = (pin / MPPS_PER_REG) * MPP_BITS;
+ unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS;
+
+ *config = readl(pctl->base + off);
+ *config >>= shift;
+ *config &= MPP_MASK;
+
+ return 0;
+}
+
+static int mvebu_common_mpp_set(struct mvebu_pinctrl *pctl,
+ struct mvebu_pinctrl_group *grp,
+ unsigned long config)
+{
+ unsigned pin = grp->gid;
+ unsigned off = (pin / MPPS_PER_REG) * MPP_BITS;
+ unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS;
+ unsigned long reg;
+
+ reg = readl(pctl->base + off);
+ reg &= ~(MPP_MASK << shift);
+ reg |= (config << shift);
+ writel(reg, pctl->base + off);
+
+ return 0;
+}
+
+static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned gid, unsigned long *config)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+ if (!grp->ctrl)
+ return -EINVAL;
+
+ if (grp->ctrl->mpp_get)
+ return grp->ctrl->mpp_get(grp->ctrl, config);
+
+ return mvebu_common_mpp_get(pctl, grp, config);
+}
+
+static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned gid, unsigned long config)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+
+ if (!grp->ctrl)
+ return -EINVAL;
+
+ if (grp->ctrl->mpp_set)
+ return grp->ctrl->mpp_set(grp->ctrl, config);
+
+ return mvebu_common_mpp_set(pctl, grp, config);
+}
+
+static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned gid)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+ struct mvebu_mpp_ctrl_setting *curr;
+ unsigned long config;
+ unsigned n;
+
+ if (mvebu_pinconf_group_get(pctldev, gid, &config))
+ return;
+
+ curr = mvebu_pinctrl_find_setting_by_val(pctl, grp, config);
+
+ if (curr) {
+ seq_printf(s, "current: %s", curr->name);
+ if (curr->subname)
+ seq_printf(s, "(%s)", curr->subname);
+ if (curr->flags & (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+ seq_printf(s, "(");
+ if (curr->flags & MVEBU_SETTING_GPI)
+ seq_printf(s, "i");
+ if (curr->flags & MVEBU_SETTING_GPO)
+ seq_printf(s, "o");
+ seq_printf(s, ")");
+ }
+ } else
+ seq_printf(s, "current: UNKNOWN");
+
+ if (grp->num_settings > 1) {
+ seq_printf(s, ", available = [");
+ for (n = 0; n < grp->num_settings; n++) {
+ if (curr == &grp->settings[n])
+ continue;
+
+ /* skip unsupported settings for this variant */
+ if (pctl->variant &&
+ !(pctl->variant & grp->settings[n].variant))
+ continue;
+
+ seq_printf(s, " %s", grp->settings[n].name);
+ if (grp->settings[n].subname)
+ seq_printf(s, "(%s)", grp->settings[n].subname);
+ if (grp->settings[n].flags &
+ (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) {
+ seq_printf(s, "(");
+ if (grp->settings[n].flags & MVEBU_SETTING_GPI)
+ seq_printf(s, "i");
+ if (grp->settings[n].flags & MVEBU_SETTING_GPO)
+ seq_printf(s, "o");
+ seq_printf(s, ")");
+ }
+ }
+ seq_printf(s, " ]");
+ }
+ return;
+}
+
+static struct pinconf_ops mvebu_pinconf_ops = {
+ .pin_config_group_get = mvebu_pinconf_group_get,
+ .pin_config_group_set = mvebu_pinconf_group_set,
+ .pin_config_group_dbg_show = mvebu_pinconf_group_dbg_show,
+};
+
+static int mvebu_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->num_functions;
+}
+
+static const char *mvebu_pinmux_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned fid)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->functions[fid].name;
+}
+
+static int mvebu_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned fid,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pctl->functions[fid].groups;
+ *num_groups = pctl->functions[fid].num_groups;
+ return 0;
+}
+
+static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid,
+ unsigned gid)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_function *func = &pctl->functions[fid];
+ struct mvebu_pinctrl_group *grp = &pctl->groups[gid];
+ struct mvebu_mpp_ctrl_setting *setting;
+ int ret;
+
+ setting = mvebu_pinctrl_find_setting_by_name(pctl, grp,
+ func->name);
+ if (!setting) {
+ dev_err(pctl->dev,
+ "unable to find setting %s in group %s\n",
+ func->name, func->groups[gid]);
+ return -EINVAL;
+ }
+
+ ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+ if (ret) {
+ dev_err(pctl->dev, "cannot set group %s to %s\n",
+ func->groups[gid], func->name);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_group *grp;
+ struct mvebu_mpp_ctrl_setting *setting;
+
+ grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+ if (!grp)
+ return -EINVAL;
+
+ if (grp->ctrl->mpp_gpio_req)
+ return grp->ctrl->mpp_gpio_req(grp->ctrl, offset);
+
+ setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+ if (!setting)
+ return -ENOTSUPP;
+
+ return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val);
+}
+
+static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct mvebu_pinctrl_group *grp;
+ struct mvebu_mpp_ctrl_setting *setting;
+
+ grp = mvebu_pinctrl_find_group_by_pid(pctl, offset);
+ if (!grp)
+ return -EINVAL;
+
+ if (grp->ctrl->mpp_gpio_dir)
+ return grp->ctrl->mpp_gpio_dir(grp->ctrl, offset, input);
+
+ setting = mvebu_pinctrl_find_gpio_setting(pctl, grp);
+ if (!setting)
+ return -ENOTSUPP;
+
+ if ((input && (setting->flags & MVEBU_SETTING_GPI)) ||
+ (!input && (setting->flags & MVEBU_SETTING_GPO)))
+ return 0;
+
+ return -ENOTSUPP;
+}
+
+static struct pinmux_ops mvebu_pinmux_ops = {
+ .get_functions_count = mvebu_pinmux_get_funcs_count,
+ .get_function_name = mvebu_pinmux_get_func_name,
+ .get_function_groups = mvebu_pinmux_get_groups,
+ .gpio_request_enable = mvebu_pinmux_gpio_request_enable,
+ .gpio_set_direction = mvebu_pinmux_gpio_set_direction,
+ .enable = mvebu_pinmux_enable,
+};
+
+static int mvebu_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ return pctl->num_groups;
+}
+
+static const char *mvebu_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned gid)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ return pctl->groups[gid].name;
+}
+
+static int mvebu_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned gid, const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ *pins = pctl->groups[gid].pins;
+ *num_pins = pctl->groups[gid].npins;
+ return 0;
+}
+
+static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct property *prop;
+ const char *function;
+ const char *group;
+ int ret, nmaps, n;
+
+ *map = NULL;
+ *num_maps = 0;
+
+ ret = of_property_read_string(np, "marvell,function", &function);
+ if (ret) {
+ dev_err(pctl->dev,
+ "missing marvell,function in node %s\n", np->name);
+ return 0;
+ }
+
+ nmaps = of_property_count_strings(np, "marvell,pins");
+ if (nmaps < 0) {
+ dev_err(pctl->dev,
+ "missing marvell,pins in node %s\n", np->name);
+ return 0;
+ }
+
+ *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
+ if (map == NULL) {
+ dev_err(pctl->dev,
+ "cannot allocate pinctrl_map memory for %s\n",
+ np->name);
+ return -ENOMEM;
+ }
+
+ n = 0;
+ of_property_for_each_string(np, "marvell,pins", prop, group) {
+ struct mvebu_pinctrl_group *grp =
+ mvebu_pinctrl_find_group_by_name(pctl, group);
+
+ if (!grp) {
+ dev_err(pctl->dev, "unknown pin %s", group);
+ continue;
+ }
+
+ if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) {
+ dev_err(pctl->dev, "unsupported function %s on pin %s",
+ function, group);
+ continue;
+ }
+
+ (*map)[n].type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)[n].data.mux.group = group;
+ (*map)[n].data.mux.function = function;
+ n++;
+ }
+
+ *num_maps = nmaps;
+
+ return 0;
+}
+
+static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ kfree(map);
+}
+
+static struct pinctrl_ops mvebu_pinctrl_ops = {
+ .get_groups_count = mvebu_pinctrl_get_groups_count,
+ .get_group_name = mvebu_pinctrl_get_group_name,
+ .get_group_pins = mvebu_pinctrl_get_group_pins,
+ .dt_node_to_map = mvebu_pinctrl_dt_node_to_map,
+ .dt_free_map = mvebu_pinctrl_dt_free_map,
+};
+
+static int __devinit _add_function(struct mvebu_pinctrl_function *funcs,
+ const char *name)
+{
+ while (funcs->num_groups) {
+ /* function already there */
+ if (strcmp(funcs->name, name) == 0) {
+ funcs->num_groups++;
+ return -EEXIST;
+ }
+ funcs++;
+ }
+ funcs->name = name;
+ funcs->num_groups = 1;
+ return 0;
+}
+
+static int __devinit mvebu_pinctrl_build_functions(struct platform_device *pdev,
+ struct mvebu_pinctrl *pctl)
+{
+ struct mvebu_pinctrl_function *funcs;
+ int num = 0;
+ int n, s;
+
+ /* we allocate functions for number of pins and hope
+ * there are less unique functions than pins available */
+ funcs = devm_kzalloc(&pdev->dev, pctl->desc.npins *
+ sizeof(struct mvebu_pinctrl_function), GFP_KERNEL);
+ if (!funcs)
+ return -ENOMEM;
+
+ for (n = 0; n < pctl->num_groups; n++) {
+ struct mvebu_pinctrl_group *grp = &pctl->groups[n];
+ for (s = 0; s < grp->num_settings; s++) {
+ /* skip unsupported settings on this variant */
+ if (pctl->variant &&
+ !(pctl->variant & grp->settings[s].variant))
+ continue;
+
+ /* check for unique functions and count groups */
+ if (_add_function(funcs, grp->settings[s].name))
+ continue;
+
+ num++;
+ }
+ }
+
+ /* with the number of unique functions and it's groups known,
+ reallocate functions and assign group names */
+ funcs = krealloc(funcs, num * sizeof(struct mvebu_pinctrl_function),
+ GFP_KERNEL);
+ if (!funcs)
+ return -ENOMEM;
+
+ pctl->num_functions = num;
+ pctl->functions = funcs;
+
+ for (n = 0; n < pctl->num_groups; n++) {
+ struct mvebu_pinctrl_group *grp = &pctl->groups[n];
+ for (s = 0; s < grp->num_settings; s++) {
+ struct mvebu_pinctrl_function *f;
+ const char **groups;
+
+ /* skip unsupported settings on this variant */
+ if (pctl->variant &&
+ !(pctl->variant & grp->settings[s].variant))
+ continue;
+
+ f = mvebu_pinctrl_find_function_by_name(pctl,
+ grp->settings[s].name);
+
+ /* allocate group name array if not done already */
+ if (!f->groups) {
+ f->groups = devm_kzalloc(&pdev->dev,
+ f->num_groups * sizeof(char *),
+ GFP_KERNEL);
+ if (!f->groups)
+ return -ENOMEM;
+ }
+
+ /* find next free group name and assign current name */
+ groups = f->groups;
+ while (*groups)
+ groups++;
+ *groups = grp->name;
+ }
+ }
+
+ return 0;
+}
+
+int __devinit mvebu_pinctrl_probe(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct mvebu_pinctrl *pctl;
+ void __iomem *base;
+ struct pinctrl_pin_desc *pdesc;
+ unsigned gid, n, k;
+ int ret;
+
+ if (!soc || !soc->controls || !soc->modes) {
+ dev_err(&pdev->dev, "wrong pinctrl soc info\n");
+ return -EINVAL;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ dev_err(&pdev->dev, "unable to get base address\n");
+ return -ENODEV;
+ }
+
+ pctl = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pinctrl),
+ GFP_KERNEL);
+ if (!pctl) {
+ dev_err(&pdev->dev, "unable to alloc driver\n");
+ return -ENOMEM;
+ }
+
+ pctl->desc.name = dev_name(&pdev->dev);
+ pctl->desc.owner = THIS_MODULE;
+ pctl->desc.pctlops = &mvebu_pinctrl_ops;
+ pctl->desc.pmxops = &mvebu_pinmux_ops;
+ pctl->desc.confops = &mvebu_pinconf_ops;
+ pctl->variant = soc->variant;
+ pctl->base = base;
+ pctl->dev = &pdev->dev;
+ platform_set_drvdata(pdev, pctl);
+
+ /* count controls and create names for mvebu generic
+ register controls; also does sanity checks */
+ pctl->num_groups = 0;
+ pctl->desc.npins = 0;
+ for (n = 0; n < soc->ncontrols; n++) {
+ struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+ char *names;
+
+ pctl->desc.npins += ctrl->npins;
+ /* initial control pins */
+ for (k = 0; k < ctrl->npins; k++)
+ ctrl->pins[k] = ctrl->pid + k;
+
+ /* special soc specific control */
+ if (ctrl->mpp_get || ctrl->mpp_set) {
+ if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+ dev_err(&pdev->dev, "wrong soc control info\n");
+ return -EINVAL;
+ }
+ pctl->num_groups += 1;
+ continue;
+ }
+
+ /* generic mvebu register control */
+ names = devm_kzalloc(&pdev->dev, ctrl->npins * 8, GFP_KERNEL);
+ if (!names) {
+ dev_err(&pdev->dev, "failed to alloc mpp names\n");
+ return -ENOMEM;
+ }
+ for (k = 0; k < ctrl->npins; k++)
+ sprintf(names + 8*k, "mpp%d", ctrl->pid+k);
+ ctrl->name = names;
+ pctl->num_groups += ctrl->npins;
+ }
+
+ pdesc = devm_kzalloc(&pdev->dev, pctl->desc.npins *
+ sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
+ if (!pdesc) {
+ dev_err(&pdev->dev, "failed to alloc pinctrl pins\n");
+ return -ENOMEM;
+ }
+
+ for (n = 0; n < pctl->desc.npins; n++)
+ pdesc[n].number = n;
+ pctl->desc.pins = pdesc;
+
+ pctl->groups = devm_kzalloc(&pdev->dev, pctl->num_groups *
+ sizeof(struct mvebu_pinctrl_group), GFP_KERNEL);
+ if (!pctl->groups) {
+ dev_err(&pdev->dev, "failed to alloc pinctrl groups\n");
+ return -ENOMEM;
+ }
+
+ /* assign mpp controls to groups */
+ gid = 0;
+ for (n = 0; n < soc->ncontrols; n++) {
+ struct mvebu_mpp_ctrl *ctrl = &soc->controls[n];
+ pctl->groups[gid].gid = gid;
+ pctl->groups[gid].ctrl = ctrl;
+ pctl->groups[gid].name = ctrl->name;
+ pctl->groups[gid].pins = ctrl->pins;
+ pctl->groups[gid].npins = ctrl->npins;
+
+ /* generic mvebu register control maps to a number of groups */
+ if (!ctrl->mpp_get && !ctrl->mpp_set) {
+ pctl->groups[gid].npins = 1;
+
+ for (k = 1; k < ctrl->npins; k++) {
+ gid++;
+ pctl->groups[gid].gid = gid;
+ pctl->groups[gid].ctrl = ctrl;
+ pctl->groups[gid].name = &ctrl->name[8*k];
+ pctl->groups[gid].pins = &ctrl->pins[k];
+ pctl->groups[gid].npins = 1;
+ }
+ }
+ gid++;
+ }
+
+ /* assign mpp modes to groups */
+ for (n = 0; n < soc->nmodes; n++) {
+ struct mvebu_mpp_mode *mode = &soc->modes[n];
+ struct mvebu_pinctrl_group *grp =
+ mvebu_pinctrl_find_group_by_pid(pctl, mode->pid);
+ unsigned num_settings;
+
+ if (!grp) {
+ dev_warn(&pdev->dev, "unknown pinctrl group %d\n",
+ mode->pid);
+ continue;
+ }
+
+ for (num_settings = 0; ;) {
+ struct mvebu_mpp_ctrl_setting *set =
+ &mode->settings[num_settings];
+
+ if (!set->name)
+ break;
+ num_settings++;
+
+ /* skip unsupported settings for this variant */
+ if (pctl->variant && !(pctl->variant & set->variant))
+ continue;
+
+ /* find gpio/gpo/gpi settings */
+ if (strcmp(set->name, "gpio") == 0)
+ set->flags = MVEBU_SETTING_GPI |
+ MVEBU_SETTING_GPO;
+ else if (strcmp(set->name, "gpo") == 0)
+ set->flags = MVEBU_SETTING_GPO;
+ else if (strcmp(set->name, "gpi") == 0)
+ set->flags = MVEBU_SETTING_GPI;
+ }
+
+ grp->settings = mode->settings;
+ grp->num_settings = num_settings;
+ }
+
+ ret = mvebu_pinctrl_build_functions(pdev, pctl);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to build functions\n");
+ return ret;
+ }
+
+ pctl->pctldev = pinctrl_register(&pctl->desc, &pdev->dev, pctl);
+ if (!pctl->pctldev) {
+ dev_err(&pdev->dev, "unable to register pinctrl driver\n");
+ return -EINVAL;
+ }
+
+ dev_info(&pdev->dev, "registered pinctrl driver\n");
+
+ /* register gpio ranges */
+ for (n = 0; n < soc->ngpioranges; n++)
+ pinctrl_add_gpio_range(pctl->pctldev, &soc->gpioranges[n]);
+
+ return 0;
+}
+
+int __devexit mvebu_pinctrl_remove(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl *pctl = platform_get_drvdata(pdev);
+ pinctrl_unregister(pctl->pctldev);
+ return 0;
+}
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h
new file mode 100644
index 0000000..90bd3be
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mvebu.h
@@ -0,0 +1,192 @@
+/*
+ * Marvell MVEBU pinctrl driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_MVEBU_H__
+#define __PINCTRL_MVEBU_H__
+
+/**
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
+ * internal function, inside the SoC. Each muxable unit can be switched
+ * between two or more different settings, e.g. assign mpp pin 13 to
+ * uart1 or sata.
+ *
+ * If optional mpp_get/_set functions are set these are used to get/set
+ * a specific mode. Otherwise it is assumed that the mpp control is based
+ * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir
+ * functions can be used to allow pin settings with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+ const char *name;
+ u8 pid;
+ u8 npins;
+ unsigned *pins;
+ int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+ int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+ int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+ int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/**
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
+ *
+ * A ctrl_setting describes a specific internal mux function that a mpp pin
+ * can be switched to. The value (val) will be written in the corresponding
+ * register for common mpp pin configuration registers on MVEBU. SoC specific
+ * mpp_get/_set function may use val to distinguish between different settings.
+ *
+ * The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes.
+ *
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization and stored in flags.
+ *
+ * The variant can be used to combine different revisions of one SoC to a
+ * common pinctrl driver. It is matched (AND) with variant of soc_info to
+ * determine if a setting is available on the current SoC revision.
+ */
+struct mvebu_mpp_ctrl_setting {
+ u8 val;
+ const char *name;
+ const char *subname;
+ u8 variant;
+ u8 flags;
+#define MVEBU_SETTING_GPO (1 << 0)
+#define MVEBU_SETTING_GPI (1 << 1)
+};
+
+/**
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ *
+ * A mode connects all available settings with the corresponding mpp_ctrl
+ * given by pid.
+ */
+struct mvebu_mpp_mode {
+ u8 pid;
+ struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/**
+ * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ *
+ * This struct describes all pinctrl related information for a specific SoC.
+ * If variant is unequal 0 it will be matched (AND) with variant of each
+ * setting and allows to distinguish between different revisions of one SoC.
+ */
+struct mvebu_pinctrl_soc_info {
+ u8 variant;
+ struct mvebu_mpp_ctrl *controls;
+ int ncontrols;
+ struct mvebu_mpp_mode *modes;
+ int nmodes;
+ struct pinctrl_gpio_range *gpioranges;
+ int ngpioranges;
+};
+
+#define MPP_REG_CTRL(_idl, _idh) \
+ { \
+ .name = NULL, \
+ .pid = _idl, \
+ .npins = _idh - _idl + 1, \
+ .pins = (unsigned[_idh - _idl + 1]) { }, \
+ .mpp_get = NULL, \
+ .mpp_set = NULL, \
+ .mpp_gpio_req = NULL, \
+ .mpp_gpio_dir = NULL, \
+ }
+
+#define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \
+ { \
+ .name = _name, \
+ .pid = _idl, \
+ .npins = _idh - _idl + 1, \
+ .pins = (unsigned[_idh - _idl + 1]) { }, \
+ .mpp_get = _func ## _get, \
+ .mpp_set = _func ## _set, \
+ .mpp_gpio_req = NULL, \
+ .mpp_gpio_dir = NULL, \
+ }
+
+#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \
+ { \
+ .name = _name, \
+ .pid = _idl, \
+ .npins = _idh - _idl + 1, \
+ .pins = (unsigned[_idh - _idl + 1]) { }, \
+ .mpp_get = _func ## _get, \
+ .mpp_set = _func ## _set, \
+ .mpp_gpio_req = _func ## _gpio_req, \
+ .mpp_gpio_dir = _func ## _gpio_dir, \
+ }
+
+#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
+ { \
+ .val = _val, \
+ .name = _name, \
+ .subname = _subname, \
+ .variant = _mask, \
+ .flags = 0, \
+ }
+
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
+ _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
+ _MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
+
+#define MPP_FUNCTION(_val, _name, _subname) \
+ MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
+
+#define MPP_MODE(_id, ...) \
+ { \
+ .pid = _id, \
+ .settings = (struct mvebu_mpp_ctrl_setting[]){ \
+ __VA_ARGS__, { } }, \
+ }
+
+#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \
+ { \
+ .name = "mvebu-gpio", \
+ .id = _id, \
+ .pin_base = _pinbase, \
+ .base = _gpiobase, \
+ .npins = _npins, \
+ }
+
+int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_remove(struct platform_device *pdev);
+
+#endif
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index 9bd1c92..dfb4b7f 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -37,8 +37,6 @@
#include <linux/spi/spi.h>
-#include <plat/clock.h>
-
#define OMAP1_SPI100K_MAX_FREQ 48000000
#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 474e217..3542fdc 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -43,7 +43,6 @@
#include <linux/spi/spi.h>
-#include <plat/clock.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
OpenPOWER on IntegriCloud