Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal

38 files changed, 262 insertions, 270 deletions

diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index 589b40c..2a27227 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -483,7 +483,7 @@ printk(KERN_INFO "my ip: %pI4\n", &ipaddress);
     <function>get_user()</function>
     /
     <function>put_user()</function>
-    <filename class="headerfile">include/asm/uaccess.h</filename>
+    <filename class="headerfile">include/linux/uaccess.h</filename>
    </title>  
 
    <para>
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 05ec5e0..67532f2 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -23,7 +23,6 @@ static inline int fsr_fs(unsigned int fsr)
 #endif
 
 void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-unsigned long search_exception_table(unsigned long addr);
 void early_abt_enable(void);
 
 #endif	/* __ARCH_ARM_FAULT_H */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 07d7a7e..a0513d4 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -522,5 +522,6 @@ extern void __init pgtable_cache_init(void);
 #ifndef __ASSEMBLY__
 extern void __init paging_init(void);
 #endif /* !__ASSEMBLY__ */
+#define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ASM_PGTABLE_H */
diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h
index 4377c89..2305142 100644
--- a/arch/frv/include/asm/segment.h
+++ b/arch/frv/include/asm/segment.h
@@ -32,7 +32,6 @@ typedef struct {
 #define get_ds()		(KERNEL_DS)
 #define get_fs()		(__current_thread_info->addr_limit)
 #define segment_eq(a, b)	((a).seg == (b).seg)
-#define __kernel_ds_p()		segment_eq(get_fs(), KERNEL_DS)
 #define get_addr_limit()	(get_fs().seg)
 
 #define set_fs(_x)					\
diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h
index 87d9e34..c0f4057e 100644
--- a/arch/frv/include/asm/uaccess.h
+++ b/arch/frv/include/asm/uaccess.h
@@ -20,8 +20,6 @@
 #include <asm/segment.h>
 #include <asm/sections.h>
 
-#define HAVE_ARCH_UNMAPPED_AREA	/* we decide where to put mmaps */
-
 #define __ptr(x) ((unsigned long __force *)(x))
 
 #define VERIFY_READ	0
diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h
index 1bdf152..36deeb3 100644
--- a/arch/m68k/include/asm/uaccess_no.h
+++ b/arch/m68k/include/asm/uaccess_no.h
@@ -44,9 +44,6 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 
 /*
  * These are the main single-value transfer routines.  They automatically
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 8266767..253a67e 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -71,9 +71,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 #ifndef CONFIG_MMU
 
 /* Check against bounds of physical memory */
diff --git a/arch/mips/include/asm/extable.h b/arch/mips/include/asm/extable.h
new file mode 100644
index 0000000..dce7a62
--- /dev/null
+++ b/arch/mips/include/asm/extable.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_EXTABLE_H
+#define _ASM_EXTABLE_H
+
+struct exception_table_entry
+{
+	unsigned long insn;
+	unsigned long nextinsn;
+};
+
+struct pt_regs;
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 0aaf9a0..702c273 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -3,7 +3,7 @@
 
 #include <linux/list.h>
 #include <linux/elf.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 
 struct mod_arch_specific {
 	/* Data Bus Error exception tables */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 21a2aab..4daf839 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -16,6 +16,7 @@
 #include <linux/thread_info.h>
 #include <linux/string.h>
 #include <asm/asm-eva.h>
+#include <asm/extable.h>
 
 /*
  * The fs value determines whether argument validity checking should be
@@ -1485,12 +1486,4 @@ static inline long strnlen_user(const char __user *s, long n)
 	return res;
 }
 
-struct exception_table_entry
-{
-	unsigned long insn;
-	unsigned long nextinsn;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
 #endif /* _ASM_UACCESS_H */
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index 27533c1..dd292dc 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -16,6 +16,7 @@
 
 #include <linux/timer.h>
 #include <linux/mutex.h>
+#include <linux/uaccess.h>
 
 #include "picvue.h"
 
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
index 769d5ed..b10ba12 100644
--- a/arch/mn10300/include/asm/processor.h
+++ b/arch/mn10300/include/asm/processor.h
@@ -18,7 +18,6 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/cpu-regs.h>
-#include <asm/uaccess.h>
 #include <asm/current.h>
 
 /* Forward declaration, a strange C thing */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index d012e87..2eedf6f 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -38,7 +38,6 @@
 #define get_ds()	(KERNEL_DS)
 #define get_fs()	(current_thread_info()->addr_limit)
 #define set_fs(x)	(current_thread_info()->addr_limit = (x))
-#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
 
 #define segment_eq(a, b) ((a).seg == (b).seg)
 
@@ -72,12 +71,6 @@ static inline int ___range_ok(unsigned long addr, unsigned int size)
 #define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 #define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
 
-static inline int verify_area(int type, const void *addr, unsigned long size)
-{
-	return access_ok(type, addr, size) ? 0 : -EFAULT;
-}
-
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index dfd0301..cd8cb1d 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -75,7 +75,7 @@ static int restore_sigcontext(struct pt_regs *regs,
 		struct fpucontext *buf;
 		err |= __get_user(buf, &sc->fpucontext);
 		if (buf) {
-			if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
 				goto badframe;
 			err |= fpu_restore_sigcontext(buf);
 		}
@@ -98,7 +98,7 @@ asmlinkage long sys_sigreturn(void)
 	long d0;
 
 	frame = (struct sigframe __user *) current_frame()->sp;
-	if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__get_user(set.sig[0], &frame->sc.oldmask))
 		goto badframe;
@@ -130,7 +130,7 @@ asmlinkage long sys_rt_sigreturn(void)
 	long d0;
 
 	frame = (struct rt_sigframe __user *) current_frame()->sp;
-	if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h
index 5cc6b4f..140faa1 100644
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -82,10 +82,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-extern void sort_exception_table(void);
-
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
diff --git a/arch/score/include/asm/extable.h b/arch/score/include/asm/extable.h
new file mode 100644
index 0000000..c4423ccf
--- /dev/null
+++ b/arch/score/include/asm/extable.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SCORE_EXTABLE_H
+#define _ASM_SCORE_EXTABLE_H
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+struct pt_regs;
+extern int fixup_exception(struct pt_regs *regs);
+#endif
diff --git a/arch/score/include/asm/module.h b/arch/score/include/asm/module.h
index abf395b..6dc1f29 100644
--- a/arch/score/include/asm/module.h
+++ b/arch/score/include/asm/module.h
@@ -2,7 +2,7 @@
 #define _ASM_SCORE_MODULE_H
 
 #include <linux/list.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 #include <asm-generic/module.h>
 
 struct mod_arch_specific {
diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
index 01aec8c..db58ab9 100644
--- a/arch/score/include/asm/uaccess.h
+++ b/arch/score/include/asm/uaccess.h
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/thread_info.h>
+#include <asm/extable.h>
 
 #define VERIFY_READ		0
 #define VERIFY_WRITE		1
@@ -420,12 +421,5 @@ static inline long strnlen_user(const char __user *str, long len)
 		return __strnlen_user(str, len);
 }
 
-struct exception_table_entry {
-	unsigned long insn;
-	unsigned long fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
 #endif /* __SCORE_UACCESS_H */
 
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 92ade79..a38d0c7 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -192,8 +192,6 @@ struct exception_table_entry {
 #endif
 
 int fixup_exception(struct pt_regs *regs);
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-unsigned long search_exception_table(unsigned long addr);
 const struct exception_table_entry *search_exception_tables(unsigned long addr);
 
 extern void *set_exception_table_vec(unsigned int vec, void *handler);
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 9331083..3f2d403 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -7,7 +7,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
-#include <asm/uaccess.h>
+#include <asm/extable_64.h>
 #include <asm/spitfire.h>
 
 /*
diff --git a/arch/sparc/include/asm/extable_64.h b/arch/sparc/include/asm/extable_64.h
new file mode 100644
index 0000000..1121cb0
--- /dev/null
+++ b/arch/sparc/include/asm/extable_64.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_EXTABLE64_H
+#define __ASM_EXTABLE64_H
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 37a315d..b68acc5 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -13,6 +13,7 @@
 #include <asm/asi.h>
 #include <asm/spitfire.h>
 #include <asm-generic/uaccess-unaligned.h>
+#include <asm/extable_64.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -81,23 +82,6 @@ static inline int access_ok(int type, const void __user * addr, unsigned long si
 	return 1;
 }
 
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-        unsigned int insn, fixup;
-};
-
 void __ret_efault(void);
 void __retl_efault(void);
 
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 61518cf..872877d 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -4,7 +4,6 @@
 /* Caches aren't brain-dead on the intel. */
 #include <asm-generic/cacheflush.h>
 #include <asm/special_insns.h>
-#include <asm/uaccess.h>
 
 /*
  * The set_memory_* API can be used to change various attributes of a virtual
diff --git a/arch/x86/include/asm/extable.h b/arch/x86/include/asm/extable.h
new file mode 100644
index 0000000..b8ad261
--- /dev/null
+++ b/arch/x86/include/asm/extable.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_X86_EXTABLE_H
+#define _ASM_X86_EXTABLE_H
+/*
+ * The exception table consists of triples of addresses relative to the
+ * exception table entry itself. The first address is of an instruction
+ * that is allowed to fault, the second is the target at which the program
+ * should continue. The third is a handler function to deal with the fault
+ * caused by the instruction in the first field.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	int insn, fixup, handler;
+};
+struct pt_regs;
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)			\
+	do {							\
+		(a)->fixup = (b)->fixup + (delta);		\
+		(b)->fixup = (tmp).fixup - (delta);		\
+		(a)->handler = (b)->handler + (delta);		\
+		(b)->handler = (tmp).handler - (delta);		\
+	} while (0)
+
+extern int fixup_exception(struct pt_regs *regs, int trapnr);
+extern bool ex_has_fault_handler(unsigned long ip);
+extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
+
+#endif
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 13b6cdd..2f75f30 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -2,7 +2,7 @@
 #define _ASM_X86_SECTIONS_H
 
 #include <asm-generic/sections.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 
 extern char __brk_base[], __brk_limit[];
 extern struct exception_table_entry __stop___ex_table[];
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 2131c4c..faf3687 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <asm/asm.h>
 #include <asm/page.h>
 #include <asm/smap.h>
+#include <asm/extable.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -91,37 +92,6 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
 	likely(!__range_not_ok(addr, size, user_addr_max()))
 
 /*
- * The exception table consists of triples of addresses relative to the
- * exception table entry itself. The first address is of an instruction
- * that is allowed to fault, the second is the target at which the program
- * should continue. The third is a handler function to deal with the fault
- * caused by the instruction in the first field.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	int insn, fixup, handler;
-};
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-
-#define swap_ex_entry_fixup(a, b, tmp, delta)			\
-	do {							\
-		(a)->fixup = (b)->fixup + (delta);		\
-		(b)->fixup = (tmp).fixup - (delta);		\
-		(a)->handler = (b)->handler + (delta);		\
-		(b)->handler = (tmp).handler - (delta);		\
-	} while (0)
-
-extern int fixup_exception(struct pt_regs *regs, int trapnr);
-extern bool ex_has_fault_handler(unsigned long ip);
-extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
-
-/*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
  *
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 4dc1334..9f72ca3 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -5,7 +5,7 @@
  */
 #include <linux/sched.h>		/* test_thread_flag(), ...	*/
 #include <linux/kdebug.h>		/* oops_begin/end, ...		*/
-#include <linux/extable.h>		/* search_exception_table	*/
+#include <linux/extable.h>		/* search_exception_tables	*/
 #include <linux/bootmem.h>		/* max_low_pfn			*/
 #include <linux/kprobes.h>		/* NOKPROBE_SYMBOL, ...		*/
 #include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/
diff --git a/arch/xtensa/include/asm/asm-uaccess.h b/arch/xtensa/include/asm/asm-uaccess.h
new file mode 100644
index 0000000..a7a1100
--- /dev/null
+++ b/arch/xtensa/include/asm/asm-uaccess.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-xtensa/uaccess.h
+ *
+ * User space memory access functions
+ *
+ * These routines provide basic accessing functions to the user memory
+ * space for the kernel. This header file provides functions such as:
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ASM_UACCESS_H
+#define _XTENSA_ASM_UACCESS_H
+
+#include <linux/errno.h>
+#include <asm/types.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+
+/*
+ * These assembly macros mirror the C macros in asm/uaccess.h.  They
+ * should always have identical functionality.  See
+ * arch/xtensa/kernel/sys.S for usage.
+ */
+
+#define KERNEL_DS	0
+#define USER_DS		1
+
+#define get_ds		(KERNEL_DS)
+
+/*
+ * get_fs reads current->thread.current_ds into a register.
+ * On Entry:
+ * 	<ad>	anything
+ * 	<sp>	stack
+ * On Exit:
+ * 	<ad>	contains current->thread.current_ds
+ */
+	.macro	get_fs	ad, sp
+	GET_CURRENT(\ad,\sp)
+#if THREAD_CURRENT_DS > 1020
+	addi	\ad, \ad, TASK_THREAD
+	l32i	\ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
+#else
+	l32i	\ad, \ad, THREAD_CURRENT_DS
+#endif
+	.endm
+
+/*
+ * set_fs sets current->thread.current_ds to some value.
+ * On Entry:
+ *	<at>	anything (temp register)
+ *	<av>	value to write
+ *	<sp>	stack
+ * On Exit:
+ *	<at>	destroyed (actually, current)
+ *	<av>	preserved, value to write
+ */
+	.macro	set_fs	at, av, sp
+	GET_CURRENT(\at,\sp)
+	s32i	\av, \at, THREAD_CURRENT_DS
+	.endm
+
+/*
+ * kernel_ok determines whether we should bypass addr/size checking.
+ * See the equivalent C-macro version below for clarity.
+ * On success, kernel_ok branches to a label indicated by parameter
+ * <success>.  This implies that the macro falls through to the next
+ * insruction on an error.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on error).
+ *
+ * On Entry:
+ * 	<at>		anything (temp register)
+ * 	<success>	label to branch to on success; implies
+ * 			fall-through macro on error
+ * 	<sp>		stack pointer
+ * On Exit:
+ * 	<at>		destroyed (actually, current->thread.current_ds)
+ */
+
+#if ((KERNEL_DS != 0) || (USER_DS == 0))
+# error Assembly macro kernel_ok fails
+#endif
+	.macro	kernel_ok  at, sp, success
+	get_fs	\at, \sp
+	beqz	\at, \success
+	.endm
+
+/*
+ * user_ok determines whether the access to user-space memory is allowed.
+ * See the equivalent C-macro version below for clarity.
+ *
+ * On error, user_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on success).
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed (actually, (TASK_SIZE + 1 - size))
+ */
+	.macro	user_ok	aa, as, at, error
+	movi	\at, __XTENSA_UL_CONST(TASK_SIZE)
+	bgeu	\as, \at, \error
+	sub	\at, \at, \as
+	bgeu	\aa, \at, \error
+	.endm
+
+/*
+ * access_ok determines whether a memory access is allowed.  See the
+ * equivalent C-macro version below for clarity.
+ *
+ * On error, access_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that we assume success is the common case, and we optimize the
+ * branch fall-through case on success.
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<sp>
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed
+ */
+	.macro	access_ok  aa, as, at, sp, error
+	kernel_ok  \at, \sp, .Laccess_ok_\@
+	user_ok    \aa, \as, \at, \error
+.Laccess_ok_\@:
+	.endm
+
+#endif	/* _XTENSA_ASM_UACCESS_H */
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index 147b26e..848a3d7 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -17,153 +17,12 @@
 #define _XTENSA_UACCESS_H
 
 #include <linux/errno.h>
-#ifndef __ASSEMBLY__
 #include <linux/prefetch.h>
-#endif
 #include <asm/types.h>
 
 #define VERIFY_READ    0
 #define VERIFY_WRITE   1
 
-#ifdef __ASSEMBLY__
-
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/processor.h>
-
-/*
- * These assembly macros mirror the C macros that follow below.  They
- * should always have identical functionality.  See
- * arch/xtensa/kernel/sys.S for usage.
- */
-
-#define KERNEL_DS	0
-#define USER_DS		1
-
-#define get_ds		(KERNEL_DS)
-
-/*
- * get_fs reads current->thread.current_ds into a register.
- * On Entry:
- * 	<ad>	anything
- * 	<sp>	stack
- * On Exit:
- * 	<ad>	contains current->thread.current_ds
- */
-	.macro	get_fs	ad, sp
-	GET_CURRENT(\ad,\sp)
-#if THREAD_CURRENT_DS > 1020
-	addi	\ad, \ad, TASK_THREAD
-	l32i	\ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
-#else
-	l32i	\ad, \ad, THREAD_CURRENT_DS
-#endif
-	.endm
-
-/*
- * set_fs sets current->thread.current_ds to some value.
- * On Entry:
- *	<at>	anything (temp register)
- *	<av>	value to write
- *	<sp>	stack
- * On Exit:
- *	<at>	destroyed (actually, current)
- *	<av>	preserved, value to write
- */
-	.macro	set_fs	at, av, sp
-	GET_CURRENT(\at,\sp)
-	s32i	\av, \at, THREAD_CURRENT_DS
-	.endm
-
-/*
- * kernel_ok determines whether we should bypass addr/size checking.
- * See the equivalent C-macro version below for clarity.
- * On success, kernel_ok branches to a label indicated by parameter
- * <success>.  This implies that the macro falls through to the next
- * insruction on an error.
- *
- * Note that while this macro can be used independently, we designed
- * in for optimal use in the access_ok macro below (i.e., we fall
- * through on error).
- *
- * On Entry:
- * 	<at>		anything (temp register)
- * 	<success>	label to branch to on success; implies
- * 			fall-through macro on error
- * 	<sp>		stack pointer
- * On Exit:
- * 	<at>		destroyed (actually, current->thread.current_ds)
- */
-
-#if ((KERNEL_DS != 0) || (USER_DS == 0))
-# error Assembly macro kernel_ok fails
-#endif
-	.macro	kernel_ok  at, sp, success
-	get_fs	\at, \sp
-	beqz	\at, \success
-	.endm
-
-/*
- * user_ok determines whether the access to user-space memory is allowed.
- * See the equivalent C-macro version below for clarity.
- *
- * On error, user_ok branches to a label indicated by parameter
- * <error>.  This implies that the macro falls through to the next
- * instruction on success.
- *
- * Note that while this macro can be used independently, we designed
- * in for optimal use in the access_ok macro below (i.e., we fall
- * through on success).
- *
- * On Entry:
- * 	<aa>	register containing memory address
- * 	<as>	register containing memory size
- * 	<at>	temp register
- * 	<error>	label to branch to on error; implies fall-through
- * 		macro on success
- * On Exit:
- * 	<aa>	preserved
- * 	<as>	preserved
- * 	<at>	destroyed (actually, (TASK_SIZE + 1 - size))
- */
-	.macro	user_ok	aa, as, at, error
-	movi	\at, __XTENSA_UL_CONST(TASK_SIZE)
-	bgeu	\as, \at, \error
-	sub	\at, \at, \as
-	bgeu	\aa, \at, \error
-	.endm
-
-/*
- * access_ok determines whether a memory access is allowed.  See the
- * equivalent C-macro version below for clarity.
- *
- * On error, access_ok branches to a label indicated by parameter
- * <error>.  This implies that the macro falls through to the next
- * instruction on success.
- *
- * Note that we assume success is the common case, and we optimize the
- * branch fall-through case on success.
- *
- * On Entry:
- * 	<aa>	register containing memory address
- * 	<as>	register containing memory size
- * 	<at>	temp register
- * 	<sp>
- * 	<error>	label to branch to on error; implies fall-through
- * 		macro on success
- * On Exit:
- * 	<aa>	preserved
- * 	<as>	preserved
- * 	<at>	destroyed
- */
-	.macro	access_ok  aa, as, at, sp, error
-	kernel_ok  \at, \sp, .Laccess_ok_\@
-	user_ok    \aa, \as, \at, \error
-.Laccess_ok_\@:
-	.endm
-
-#else /* __ASSEMBLY__ not defined */
-
 #include <linux/sched.h>
 
 /*
@@ -495,16 +354,4 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-
-extern unsigned long search_exception_table(unsigned long addr);
-extern void sort_exception_table(void);
-
-/* Returns the new pc */
-#define fixup_exception(map_reg, fixup_unit, pc)                \
-({                                                              \
-	fixup_unit;                                             \
-})
-
-#endif	/* __ASSEMBLY__ */
 #endif	/* _XTENSA_UACCESS_H */
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index a482df5..6911e38 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -17,7 +17,7 @@
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
 #include <asm/thread_info.h>
-#include <asm/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index fa04d9d..f5ef3cc 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -17,7 +17,7 @@
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
 #include <asm/thread_info.h>
-#include <asm/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index 480a777..7c19d9b 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -21,6 +21,7 @@
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include <asm/io.h>
 #include <asm/reboot.h>
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3f31ca3..5fa36eb 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -471,9 +471,9 @@ static int bond_check_dev_link(struct bonding *bond,
 		/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
 		strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
 		mii = if_mii(&ifr);
-		if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
+		if (ioctl(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
 			mii->reg_num = MII_BMSR;
-			if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
+			if (ioctl(slave_dev, &ifr, SIOCGMIIREG) == 0)
 				return mii->val_out & BMSR_LSTATUS;
 		}
 	}
diff --git a/drivers/platform/x86/dell-smo8800.c b/drivers/platform/x86/dell-smo8800.c
index 0aec4fd..37e6460 100644
--- a/drivers/platform/x86/dell-smo8800.c
+++ b/drivers/platform/x86/dell-smo8800.c
@@ -24,6 +24,7 @@
 #include <linux/acpi.h>
 #include <linux/interrupt.h>
 #include <linux/miscdevice.h>
+#include <linux/uaccess.h>
 
 struct smo8800_device {
 	u32 irq;                     /* acpi device irq */
diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index f9507b1..6c2b2ca 100644
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -43,6 +43,7 @@
 #include <linux/ctype.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1200fb.h>	/* platform_data */
diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c
index 835d310..e2209bf 100644
--- a/drivers/watchdog/ath79_wdt.c
+++ b/drivers/watchdog/ath79_wdt.c
@@ -35,6 +35,7 @@
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/uaccess.h>
 
 #define DRIVER_NAME	"ath79-wdt"
 
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 6df9b07..cc6bb31 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -69,10 +69,6 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
 /*
  * architectures with an MMU should override these two
  */
diff --git a/include/net/bonding.h b/include/net/bonding.h
index 6360c25..f32f7ef 100644
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -37,18 +37,6 @@
 #ifndef __long_aligned
 #define __long_aligned __attribute__((aligned((sizeof(long)))))
 #endif
-/*
- * Less bad way to call ioctl from within the kernel; this needs to be
- * done some other way to get the call out of interrupt context.
- * Needs "ioctl" variable to be supplied by calling context.
- */
-#define IOCTL(dev, arg, cmd) ({		\
-	int res = 0;			\
-	mm_segment_t fs = get_fs();	\
-	set_fs(get_ds());		\
-	res = ioctl(dev, arg, cmd);	\
-	set_fs(fs);			\
-	res; })
 
 #define BOND_MODE(bond) ((bond)->params.mode)