Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's the usual "low-priority fixes that didn't make it into the last
  few -rcs, with a twist: We had a fixes pull request that I didn't send
  in time to get into 4.0, so we'll send some of them to Greg for
  -stable as well.

  Contents here is as usual not all that controversial:

   - a handful of randconfig fixes from Arnd, in particular for older
     Samsung platforms

   - Exynos fixes, !SMP building, DTS updates for MMC and lid switch

   - Kbuild fix to create output subdirectory for DTB files

   - misc minor fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  ARM: at91/dt: sama5d3 xplained: add phy address for macb1
  kbuild: Create directory for target DTB
  ARM: mvebu: Disable CPU Idle on Armada 38x
  ARM: DRA7: Enable Cortex A15 errata 798181
  ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102
  ARM: dts: DRA7: Add bandgap and related thermal nodes
  bus: ocp2scp: SYNC2 value should be changed to 0x6
  ARM: dts: am4372: Add "ti,am437x-ocp2scp" as compatible string for OCP2SCP
  ARM: OMAP2+: remove superfluous NULL pointer check
  ARM: EXYNOS: Fix build breakage cpuidle on !SMP
  ARM: dts: fix lid and power pin-functions for exynos5250-spring
  ARM: dts: fix mmc node updates for exynos5250-spring
  ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
  MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
  ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
  ARM: cns3xxx: don't export static symbol
  ARM: S3C24XX: avoid a Kconfig warning
  ARM: S3C24XX: fix header file inclusions
  ARM: S3C24XX: fix building without PM_SLEEP
  ARM: S3C24XX: use SAMSUNG_WAKEMASK for s3c2416
  ...

44 files changed, 254 insertions, 209 deletions

diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index 63dd805..18729f6 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -1,7 +1,8 @@
 * OMAP OCP2SCP - ocp interface to scp interface
 
 properties:
-- compatible : Should be "ti,omap-ocp2scp"
+- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor
+	       Should be "ti,omap-ocp2scp" for all others
 - reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
diff --git a/MAINTAINERS b/MAINTAINERS
index b4b131a..8e9ecbe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7007,6 +7007,8 @@ Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
 F:	arch/arm/*omap*/
+F:	arch/arm/configs/omap1_defconfig
+F:	arch/arm/configs/omap2plus_defconfig
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c
 F:	drivers/mfd/*omap*.c
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 8a099bc1..ebe4fa6 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -796,7 +796,7 @@
 		};
 
 		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,omap-ocp2scp";
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -815,7 +815,7 @@
 		};
 
 		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,omap-ocp2scp";
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index bd48dba..e580f4f 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -87,6 +87,7 @@
 		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
+		#cooling-cells = <2>;
 	};
 
 	extcon_usb1: extcon_usb1 {
@@ -442,6 +443,7 @@
 		pinctrl-0 = <&tmp102_pins_default>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
 	};
 };
 
@@ -551,3 +553,50 @@
 &usb2 {
 	dr_mode = "peripheral";
 };
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index fec1fca..6c4bc53 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -167,7 +167,13 @@
 
 			macb1: ethernet@f802c000 {
 				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index a0afce7..fe55938 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -185,6 +185,18 @@
 			};
 		};
 
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+				0x4a00232c 0xc
+				0x4a002380 0x2c
+				0x4a0023C0 0x3c
+				0x4a002564 0x8
+				0x4a002574 0x50>;
+				compatible = "ti,dra752-bandgap";
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+		};
+
 		cm_core_aon: cm_core_aon@4a005000 {
 			compatible = "ti,dra7-cm-core-aon";
 			reg = <0x4a005000 0x2000>;
@@ -1435,6 +1447,17 @@
 			status = "disabled";
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
 };
 
 /include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f7fb0d0..03d742f 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -20,6 +20,11 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 00eeed7..cc560a7 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -31,6 +31,11 @@
 			clock-names = "cpu";
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index f027754..d075a68 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -429,7 +429,6 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -437,11 +436,8 @@
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
+	cap-mmc-highspeed;
 };
 
 /*
@@ -451,7 +447,6 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -459,11 +454,8 @@
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
+	bus-width = <4>;
+	cap-sd-highspeed;
 };
 
 &pinctrl_0 {
@@ -490,7 +482,7 @@
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0>;
+		samsung,pin-function = <0xf>;
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
@@ -518,7 +510,7 @@
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0>;
+		samsung,pin-function = <0xf>;
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index cb9458f..ab7f87a 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -18,7 +18,7 @@ cpu_thermal: cpu_thermal {
 			/* sensor       ID */
         thermal-sensors = <&bandgap     0>;
 
-        trips {
+	cpu_trips: trips {
                 cpu_alert0: cpu_alert {
                         temperature = <100000>; /* millicelsius */
                         hysteresis = <2000>; /* millicelsius */
@@ -31,7 +31,7 @@ cpu_thermal: cpu_thermal {
                 };
         };
 
-	cooling-maps {
+	cpu_cooling_maps: cooling-maps {
 		map0 {
 			trip = <&cpu_alert0>;
 			cooling-device =
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index fb38c72..f46b78d 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -73,7 +73,6 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 
 	__raw_writel(reg, PM_SOFT_RST_REG);
 }
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
 {
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index f44c2e0..8576a9f 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -206,7 +206,7 @@ static void __init exynos_dt_machine_init(void)
 	if (!IS_ENABLED(CONFIG_SMP))
 		exynos_sysram_init();
 
-#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
 	if (of_machine_is_compatible("samsung,exynos4210"))
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e6209da..5685250 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -181,6 +181,7 @@ void exynos_enter_aftr(void)
 	cpu_pm_exit();
 }
 
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
 static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
 
 static int exynos_cpu0_enter_aftr(void)
@@ -302,3 +303,4 @@ struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
 	.pre_enter_aftr		= exynos_pre_enter_aftr,
 	.post_enter_aftr		= exynos_post_enter_aftr,
 };
+#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 8b9f5e2..4f4e222 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -415,6 +415,9 @@ static __init int armada_38x_cpuidle_init(void)
 	void __iomem *mpsoc_base;
 	u32 reg;
 
+	pr_warn("CPU idle is currently broken on Armada 38x: disabling");
+	return 0;
+
 	np = of_find_compatible_node(NULL, NULL,
 				     "marvell,armada-380-coherency-fabric");
 	if (!np)
@@ -476,6 +479,16 @@ static int __init mvebu_v7_cpu_pm_init(void)
 		return 0;
 	of_node_put(np);
 
+	/*
+	 * Currently the CPU idle support for Armada 38x is broken, as
+	 * the CPU hotplug uses some of the CPU idle functions it is
+	 * broken too, so let's disable it
+	 */
+	if (of_machine_is_compatible("marvell,armada380")) {
+		cpu_hotplug_disable();
+		pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling");
+	}
+
 	if (of_machine_is_compatible("marvell,armadaxp"))
 		ret = armada_xp_cpuidle_init();
 	else if (of_machine_is_compatible("marvell,armada370"))
@@ -489,7 +502,8 @@ static int __init mvebu_v7_cpu_pm_init(void)
 		return ret;
 
 	mvebu_v7_pmsu_enable_l2_powerdown_onidle();
-	platform_device_register(&mvebu_v7_cpuidle_device);
+	if (mvebu_v7_cpuidle_device.name)
+		platform_device_register(&mvebu_v7_cpuidle_device);
 	cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
 
 	return 0;
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 34b4c00..dd94567 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,13 +71,7 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
-#ifndef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 0;
-
-#else
-
-static unsigned short enable_dyn_sleep = 1;
+static unsigned short enable_dyn_sleep;
 
 static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
 			 char *buf)
@@ -90,8 +84,9 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
 {
 	unsigned short value;
 	if (sscanf(buf, "%hu", &value) != 1 ||
-	    (value != 0 && value != 1)) {
-		printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+	    (value != 0 && value != 1) ||
+	    (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+		pr_err("idle_sleep_store: Invalid value\n");
 		return -EINVAL;
 	}
 	enable_dyn_sleep = value;
@@ -101,7 +96,6 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
 static struct kobj_attribute sleep_while_idle_attr =
 	__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
 
-#endif
 
 static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
 
@@ -115,16 +109,11 @@ void omap1_pm_idle(void)
 {
 	extern __u32 arm_idlect1_mask;
 	__u32 use_idlect1 = arm_idlect1_mask;
-	int do_sleep = 0;
 
 	local_fiq_disable();
 
 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
-	if (enable_dyn_sleep)
-		do_sleep = 1;
 #endif
 
 #ifdef CONFIG_OMAP_DM_TIMER
@@ -134,10 +123,12 @@ void omap1_pm_idle(void)
 	if (omap_dma_running())
 		use_idlect1 &= ~(1 << 6);
 
-	/* We should be able to remove the do_sleep variable and multiple
+	/*
+	 * We should be able to remove the do_sleep variable and multiple
 	 * tests above as soon as drivers, timer and DMA code have been fixed.
-	 * Even the sleep block count should become obsolete. */
-	if ((use_idlect1 != ~0) || !do_sleep) {
+	 * Even the sleep block count should become obsolete.
+	 */
+	if ((use_idlect1 != ~0) || !enable_dyn_sleep) {
 
 		__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
 		if (cpu_is_omap15xx())
@@ -635,15 +626,25 @@ static const struct platform_suspend_ops omap_pm_ops = {
 
 static int __init omap_pm_init(void)
 {
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	int error;
-#endif
+	int error = 0;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	printk("Power Management for TI OMAP.\n");
+	pr_info("Power Management for TI OMAP.\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+	if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+	    IS_ENABLED(CONFIG_OMAP_DM_TIMER)) {
+		/* OMAP16xx only */
+		pr_info("OMAP1 PM: sleep states in idle enabled\n");
+		enable_dyn_sleep = 1;
+	}
 
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
@@ -693,17 +694,15 @@ static int __init omap_pm_init(void)
 	omap_pm_init_debugfs();
 #endif
 
-#ifdef CONFIG_OMAP_32K_TIMER
 	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
 		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */
 		omap_cfg_reg(T20_1610_LOW_PWR);
 	}
 
-	return 0;
+	return error;
 }
 __initcall(omap_pm_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2b8e477..1041b19 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -69,6 +69,7 @@ config SOC_DRA7XX
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
 	select IRQ_CROSSBAR
+	select ARM_ERRATA_798181 if SMP
 
 config ARCH_OMAP2PLUS
 	bool
@@ -278,27 +279,6 @@ config OMAP3_SDRC_AC_TIMING
 	  wish to say no.  Selecting yes without understanding what is
 	  going on could result in system crashes;
 
-config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption"
-	depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
-	select ARCH_HAS_BARRIERS
-	help
-	  If a data is stalled inside asynchronous bridge because of back
-	  pressure, it may be accepted multiple times, creating pointer
-	  misalignment that will corrupt next transfers on that data path
-	  until next reset of the system (No recovery procedure once the
-	  issue is hit, the path remains consistently broken). Async bridge
-	  can be found on path between MPU to EMIF and MPU to L3 interconnect.
-	  This situation can happen only when the idle is initiated by a
-	  Master Request Disconnection (which is trigged by software when
-	  executing WFI on CPU).
-	  The work-around for this errata needs all the initiators connected
-	  through async bridge must ensure that data path is properly drained
-	  before issuing WFI. This condition will be met if one Strongly ordered
-	  access is performed to the target right before executing the WFI.
-	  In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
-	  IO barrier ensure that there is no synchronisation loss on initiators
-	  operating on both interconnect port simultaneously.
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 484cdad..eae6a0e 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -30,5 +30,4 @@ int __weak omap_secure_ram_reserve_memblock(void)
 void __init omap_reserve(void)
 {
 	omap_secure_ram_reserve_memblock();
-	omap_barrier_reserve_memblock();
 }
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 46e2458..cf3cf22 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -200,9 +200,6 @@ void __init omap4_map_io(void);
 void __init omap5_map_io(void);
 void __init ti81xx_map_io(void);
 
-/* omap_barriers_init() is OMAP4 only */
-void omap_barriers_init(void);
-
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index c4871c5..1eeff6b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -306,7 +306,6 @@ void __init am33xx_map_io(void)
 void __init omap4_map_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
-	omap_barriers_init();
 }
 #endif
 
@@ -314,7 +313,6 @@ void __init omap4_map_io(void)
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
-	omap_barriers_init();
 }
 #endif
 /*
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 78064b0..176eef6 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1053,7 +1053,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
 		struct omap_mux *entry;
 
 #ifdef CONFIG_OMAP_MUX
-		if (!superset->muxnames || !superset->muxnames[0]) {
+		if (!superset->muxnames[0]) {
 			superset++;
 			continue;
 		}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index dec2b05..af2851f 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -70,13 +70,6 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
 #else
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 7bb116a..16350ee 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -51,75 +51,6 @@ static void __iomem *twd_base;
 
 #define IRQ_LOCALTIMER		29
 
-#ifdef CONFIG_OMAP4_ERRATA_I688
-/* Used to implement memory barrier on DRAM path */
-#define OMAP4_DRAM_BARRIER_VA			0xfe600000
-
-void __iomem *dram_sync, *sram_sync;
-
-static phys_addr_t paddr;
-static u32 size;
-
-void omap_bus_sync(void)
-{
-	if (dram_sync && sram_sync) {
-		writel_relaxed(readl_relaxed(dram_sync), dram_sync);
-		writel_relaxed(readl_relaxed(sram_sync), sram_sync);
-		isb();
-	}
-}
-EXPORT_SYMBOL(omap_bus_sync);
-
-static int __init omap4_sram_init(void)
-{
-	struct device_node *np;
-	struct gen_pool *sram_pool;
-
-	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
-	if (!np)
-		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
-			__func__);
-	sram_pool = of_get_named_gen_pool(np, "sram", 0);
-	if (!sram_pool)
-		pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
-			__func__);
-	else
-		sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
-
-	return 0;
-}
-omap_arch_initcall(omap4_sram_init);
-
-/* Steal one page physical memory for barrier implementation */
-int __init omap_barrier_reserve_memblock(void)
-{
-
-	size = ALIGN(PAGE_SIZE, SZ_1M);
-	paddr = arm_memblock_steal(size, SZ_1M);
-
-	return 0;
-}
-
-void __init omap_barriers_init(void)
-{
-	struct map_desc dram_io_desc[1];
-
-	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
-	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
-	dram_io_desc[0].length = size;
-	dram_io_desc[0].type = MT_MEMORY_RW_SO;
-	iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
-	dram_sync = (void __iomem *) dram_io_desc[0].virtual;
-
-	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
-		(long long) paddr, dram_io_desc[0].virtual);
-
-}
-#else
-void __init omap_barriers_init(void)
-{}
-#endif
-
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index b84a012..ad1bb94 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -333,11 +333,9 @@ ENDPROC(omap4_cpu_resume)
 
 #endif	/* defined(CONFIG_SMP) && defined(CONFIG_PM) */
 
-#ifndef CONFIG_OMAP4_ERRATA_I688
 ENTRY(omap_bus_sync)
 	ret	lr
 ENDPROC(omap_bus_sync)
-#endif
 
 ENTRY(omap_do_wfi)
 	stmfd	sp!, {lr}
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 79c49ff..23bec3a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -39,14 +39,14 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
 	select S3C2412_COMMON_CLK
-	select S3C2412_PM if PM
+	select S3C2412_PM if PM_SLEEP
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
 config CPU_S3C2416
 	bool "SAMSUNG S3C2416/S3C2450"
 	select CPU_ARM926T
-	select S3C2416_PM if PM
+	select S3C2416_PM if PM_SLEEP
 	select S3C2443_COMMON_CLK
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
@@ -55,7 +55,7 @@ config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM
+	select S3C2410_PM if PM_SLEEP
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -63,7 +63,7 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM
+	select S3C2410_PM if PM_SLEEP
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -228,11 +228,6 @@ config H1940BT
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on h1940.
 
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
 config MACH_N30
 	bool "Acer N30 family"
 	select S3C_DEV_NAND
@@ -362,6 +357,7 @@ if CPU_S3C2416
 config S3C2416_PM
 	bool
 	select S3C2412_PM_SLEEP
+	select SAMSUNG_WAKEMASK
 	help
 	  Internal config node to apply S3C2416 power management
 
@@ -584,6 +580,11 @@ config MACH_SMDK2443
 
 endif	# CPU_S3C2443
 
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
+
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index b40a22f..05920c8 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -32,7 +32,8 @@ obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
-obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM_SLEEP)		+= irq-pm.o sleep.o
 
 # common code
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
index 2eef7e6..69459dbb 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -10,6 +10,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "regs-clock.h"
+#include "regs-irq.h"
 
 static inline void s3c_pm_debug_init_uart(void)
 {
@@ -42,8 +47,23 @@ static inline void s3c_pm_arch_stop_clocks(void)
 	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
 }
 
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
-				    unsigned long mask);
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
+					   unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
 
 static inline void s3c_pm_arch_show_resume_irqs(void)
 {
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
index 4492389..c0e328e 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c
@@ -23,6 +23,7 @@
 
 #include "s3c2412-power.h"
 
+#ifdef CONFIG_PM_SLEEP
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2416_cpu_suspend(unsigned long arg)
@@ -70,7 +71,7 @@ static __init int s3c2416_pm_init(void)
 }
 
 arch_initcall(s3c2416_pm_init);
-
+#endif
 
 static void s3c2416_pm_resume(void)
 {
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index b19256e..5d510bc 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -50,6 +50,7 @@
 
 #define PFX "s3c24xx-pm: "
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save core_save[] = {
 	/* we restore the timings here, with the proviso that the board
 	 * brings the system up in an slower, or equal frequency setting
@@ -67,6 +68,7 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
 };
+#endif
 
 /* s3c_pm_check_resume_pin
  *
@@ -121,7 +123,7 @@ void s3c_pm_configure_extint(void)
 	}
 }
 
-
+#ifdef CONFIG_PM_SLEEP
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
@@ -131,4 +133,4 @@ void s3c_pm_save_core(void)
 {
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
-
+#endif
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 2a6985a..5061d66 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -121,7 +121,7 @@ int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index ecf2c77..64a1360 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -172,7 +172,7 @@ int __init s3c2412_init(void)
 {
 	printk("S3C2412: Initialising architecture\n");
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2412_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index bfd4da8..3f8ca2a 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -98,7 +98,7 @@ int __init s3c2416_init(void)
 	s3c_adc_setname("s3c2416-adc");
 	s3c_rtc_setname("s3c2416-rtc");
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 	register_syscore_ops(&s3c2416_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 03d379f..eb73355 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -57,11 +57,11 @@ int __init s3c2440_init(void)
 
 	/* register suspend/resume handlers */
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
 
 	/* register our system device for everything else */
 
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 7b04334..893998e 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -60,11 +60,11 @@ int __init s3c2442_init(void)
 {
 	printk("S3C2442: Initialising architecture\n");
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
 
 	return device_register(&s3c2442_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 177f978..b141195 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -108,7 +108,7 @@ static int __init s3c2442_core_init(void)
 core_initcall(s3c2442_core_init);
 
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save s3c244x_sleep[] = {
 	SAVE_ITEM(S3C2440_DSC0),
 	SAVE_ITEM(S3C2440_DSC1),
@@ -127,12 +127,9 @@ static void s3c244x_resume(void)
 {
 	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
 }
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
 
 struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+#endif
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 26ca242..eff95e9 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -189,6 +189,7 @@ endchoice
 config SMDK6410_WM1190_EV1
 	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 	depends on MACH_SMDK6410
+	depends on I2C=y
 	select MFD_WM8350_I2C
 	select REGULATOR
 	select REGULATOR_WM8350
@@ -203,6 +204,7 @@ config SMDK6410_WM1190_EV1
 config SMDK6410_WM1192_EV1
 	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
 	depends on MACH_SMDK6410
+	depends on I2C=y
 	select MFD_WM831X
 	select MFD_WM831X_I2C
 	select REGULATOR
@@ -269,8 +271,8 @@ config MACH_SMARTQ7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
+	depends on I2C=y
 	select CPU_S3C6410
-	select I2C
 	select LEDS_GPIO_REGISTER
 	select S3C64XX_DEV_SPI0
 	select S3C64XX_SETUP_FB_24BPP
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 12f67b6..17f4b07 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -16,7 +16,8 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
 # PM
 
-obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM_SLEEP)		+= irq-pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 661eb66..b7447a9 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -209,7 +209,7 @@ static struct platform_device smdk6410_smsc911x = {
 };
 
 #ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] __initdata = {
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
 	REGULATOR_SUPPLY("PVDD", "0-001b"),
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
 };
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index aaf7bea..75b14e7 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,6 +194,7 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
 	SAVE_ITEM(S3C64XX_MEM1DRVCON),
@@ -238,6 +239,7 @@ void s3c_pm_save_core(void)
 	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
+#endif
 
 /* since both s3c6400 and s3c6410 share the same sleep pm calls, we
  * put the per-cpu code in here until any new cpu comes along and changes
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index e17d871..7f415ce 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -43,7 +43,11 @@ extern unsigned long s3c_irqwake_eintmask;
 
 /* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
 extern unsigned long s3c_irqwake_intallow;
+#ifdef CONFIG_PM_SLEEP
 extern unsigned long s3c_irqwake_eintallow;
+#else
+#define s3c_irqwake_eintallow 0
+#endif
 
 /* per-cpu sleep functions */
 
@@ -58,16 +62,20 @@ extern unsigned long s3c_pm_flags;
 
 extern int s3c2410_cpu_suspend(unsigned long);
 
-#ifdef CONFIG_SAMSUNG_PM
+#ifdef CONFIG_PM_SLEEP
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
 extern void s3c_cpu_resume(void);
 #else
 #define s3c_irq_wake NULL
-#define s3c_irqext_wake NULL
 #define s3c_cpu_resume NULL
 #endif
 
+#ifdef CONFIG_SAMSUNG_PM
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irqext_wake NULL
+#endif
+
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 /**
  * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c
index 3960960..64e15da 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/arch/arm/plat-samsung/pm-debug.c
@@ -23,6 +23,7 @@
 #include <plat/pm-common.h>
 
 #ifdef CONFIG_SAMSUNG_ATAGS
+#include <plat/pm.h>
 #include <mach/pm-core.h>
 #else
 static inline void s3c_pm_debug_init_uart(void) {}
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index f8c0f97..82777c6 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -65,26 +65,6 @@ int s3c_irqext_wake(struct irq_data *data, unsigned int state)
 	return 0;
 }
 
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static void __maybe_unused s3c_pm_show_resume_irqs(int start,
-						   unsigned long which,
-						   unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-
 void (*pm_cpu_prep)(void);
 int (*pm_cpu_sleep)(unsigned long);
 
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index 723ec06..9f18569 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -16,6 +16,7 @@
  *
  */
 
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
@@ -23,6 +24,9 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+#define OCP2SCP_TIMING 0x18
+#define SYNC2_MASK 0xf
+
 static int ocp2scp_remove_devices(struct device *dev, void *c)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -35,6 +39,9 @@ static int ocp2scp_remove_devices(struct device *dev, void *c)
 static int omap_ocp2scp_probe(struct platform_device *pdev)
 {
 	int ret;
+	u32 reg;
+	void __iomem *regs;
+	struct resource *res;
 	struct device_node *np = pdev->dev.of_node;
 
 	if (np) {
@@ -47,6 +54,32 @@ static int omap_ocp2scp_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_enable(&pdev->dev);
+	/*
+	 * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
+	 * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution;
+	 * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf
+	 * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution;
+	 * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf
+	 * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution;
+	 * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249
+	 * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution;
+	 *
+	 * Read path of OCP2SCP is not working properly due to low reset value
+	 * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more.
+	 */
+	if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		regs = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(regs))
+			goto err0;
+
+		pm_runtime_get_sync(&pdev->dev);
+		reg = readl_relaxed(regs + OCP2SCP_TIMING);
+		reg &= ~(SYNC2_MASK);
+		reg |= 0x6;
+		writel_relaxed(reg, regs + OCP2SCP_TIMING);
+		pm_runtime_put_sync(&pdev->dev);
+	}
 
 	return 0;
 
@@ -67,6 +100,7 @@ static int omap_ocp2scp_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id omap_ocp2scp_id_table[] = {
 	{ .compatible = "ti,omap-ocp2scp" },
+	{ .compatible = "ti,am437x-ocp2scp" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index 0c06ea2..b5f0a9c 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -116,7 +116,8 @@ static int exynos_cpuidle_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	if (of_machine_is_compatible("samsung,exynos4210")) {
+	if (IS_ENABLED(CONFIG_SMP) &&
+	    of_machine_is_compatible("samsung,exynos4210")) {
 		exynos_cpuidle_pdata = pdev->dev.platform_data;
 
 		ret = cpuidle_register(&exynos_coupled_idle_driver,
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 044eb4f..79e8661 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -282,7 +282,8 @@ $(obj)/%.dtb.S: $(obj)/%.dtb
 	$(call cmd,dt_S_dtb)
 
 quiet_cmd_dtc = DTC     $@
-cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
+	$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
 	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
 		-i $(dir $<) $(DTC_FLAGS) \
 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \