diff options
author | Benoit Cousson <b-cousson@ti.com> | 2011-08-16 11:53:02 +0200 |
---|---|---|
committer | Benoit Cousson <b-cousson@ti.com> | 2012-03-05 23:02:53 +0100 |
commit | 384ebe1c2849160d040df3e68634ec506f13d9ff (patch) | |
tree | 75fa1a39e94203c5a85a61300578aaac4edfc9b1 | |
parent | 96751fcbe5438e95514b025e9cee7a6d38038f40 (diff) | |
download | op-kernel-dev-384ebe1c2849160d040df3e68634ec506f13d9ff.zip op-kernel-dev-384ebe1c2849160d040df3e68634ec506f13d9ff.tar.gz |
gpio/omap: Add DT support to GPIO driver
Adapt the GPIO driver to retrieve information from a DT file.
Allocate the irq_base dynamically and rename bank->virtual_irq_start
to bank->irq_base.
Change irq_base type to int instead of u16 to match irq_alloc_descs
output.
Add documentation for GPIO properties specific to OMAP.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
-rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-omap.txt | 36 | ||||
-rw-r--r-- | drivers/gpio/gpio-omap.c | 121 |
2 files changed, 148 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt new file mode 100644 index 0000000..bff51a2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -0,0 +1,36 @@ +OMAP GPIO controller bindings + +Required properties: +- compatible: + - "ti,omap2-gpio" for OMAP2 controllers + - "ti,omap3-gpio" for OMAP3 controllers + - "ti,omap4-gpio" for OMAP4 controllers +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify optional parameters (unused) +- gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. +- interrupt-controller: Mark the device node as an interrupt controller + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +OMAP specific properties: +- ti,hwmods: Name of the hwmod associated to the GPIO: + "gpio<X>", <X> being the 1-based instance number from the HW spec + + +Example: + +gpio4: gpio4 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; +}; diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index c3a9dc8..bc2bd69 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -22,6 +22,9 @@ #include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/irqdomain.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -52,7 +55,8 @@ struct gpio_bank { struct list_head node; void __iomem *base; u16 irq; - u16 virtual_irq_start; + int irq_base; + struct irq_domain *domain; u32 suspend_wakeup; u32 saved_wakeup; u32 non_wakeup_gpios; @@ -669,7 +673,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (!isr) break; - gpio_irq = bank->virtual_irq_start; + gpio_irq = bank->irq_base; for (; isr != 0; isr >>= 1, gpio_irq++) { gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq)); @@ -915,7 +919,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) struct gpio_bank *bank; bank = container_of(chip, struct gpio_bank, chip); - return bank->virtual_irq_start + offset; + return bank->irq_base + offset; } /*---------------------------------------------------------------------*/ @@ -1028,8 +1032,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) gpiochip_add(&bank->chip); - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + bank->width; j++) { + for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) { irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_data(j, bank); if (bank->is_mpuio) { @@ -1044,15 +1047,22 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) irq_set_handler_data(bank->irq, bank); } +static const struct of_device_id omap_gpio_match[]; + static int __devinit omap_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + const struct of_device_id *match; struct omap_gpio_platform_data *pdata; struct resource *res; struct gpio_bank *bank; int ret = 0; - if (!dev->platform_data) + match = of_match_device(of_match_ptr(omap_gpio_match), dev); + + pdata = match ? match->data : dev->platform_data; + if (!pdata) return -EINVAL; bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL); @@ -1068,9 +1078,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) } bank->irq = res->start; - - pdata = pdev->dev.platform_data; - bank->virtual_irq_start = pdata->virtual_irq_start; bank->dev = dev; bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; @@ -1080,6 +1087,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->loses_context = pdata->loses_context; bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; +#ifdef CONFIG_OF_GPIO + bank->chip.of_node = of_node_get(node); +#endif + + bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0); + if (bank->irq_base < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + + bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base, + 0, &irq_domain_simple_ops, NULL); if (bank->regs->set_dataout && bank->regs->clr_dataout) bank->set_dataout = _set_gpio_dataout_reg; @@ -1387,11 +1406,95 @@ static const struct dev_pm_ops gpio_pm_ops = { NULL) }; +#if defined(CONFIG_OF) +static struct omap_gpio_reg_offs omap2_gpio_regs = { + .revision = OMAP24XX_GPIO_REVISION, + .direction = OMAP24XX_GPIO_OE, + .datain = OMAP24XX_GPIO_DATAIN, + .dataout = OMAP24XX_GPIO_DATAOUT, + .set_dataout = OMAP24XX_GPIO_SETDATAOUT, + .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT, + .irqstatus = OMAP24XX_GPIO_IRQSTATUS1, + .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2, + .irqenable = OMAP24XX_GPIO_IRQENABLE1, + .irqenable2 = OMAP24XX_GPIO_IRQENABLE2, + .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1, + .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1, + .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL, + .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN, + .ctrl = OMAP24XX_GPIO_CTRL, + .wkup_en = OMAP24XX_GPIO_WAKE_EN, + .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1, + .risingdetect = OMAP24XX_GPIO_RISINGDETECT, + .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT, +}; + +static struct omap_gpio_reg_offs omap4_gpio_regs = { + .revision = OMAP4_GPIO_REVISION, + .direction = OMAP4_GPIO_OE, + .datain = OMAP4_GPIO_DATAIN, + .dataout = OMAP4_GPIO_DATAOUT, + .set_dataout = OMAP4_GPIO_SETDATAOUT, + .clr_dataout = OMAP4_GPIO_CLEARDATAOUT, + .irqstatus = OMAP4_GPIO_IRQSTATUS0, + .irqstatus2 = OMAP4_GPIO_IRQSTATUS1, + .irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1, + .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0, + .debounce = OMAP4_GPIO_DEBOUNCINGTIME, + .debounce_en = OMAP4_GPIO_DEBOUNCENABLE, + .ctrl = OMAP4_GPIO_CTRL, + .wkup_en = OMAP4_GPIO_IRQWAKEN0, + .leveldetect0 = OMAP4_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP4_GPIO_LEVELDETECT1, + .risingdetect = OMAP4_GPIO_RISINGDETECT, + .fallingdetect = OMAP4_GPIO_FALLINGDETECT, +}; + +static struct omap_gpio_platform_data omap2_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = false, +}; + +static struct omap_gpio_platform_data omap3_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static struct omap_gpio_platform_data omap4_pdata = { + .regs = &omap4_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static const struct of_device_id omap_gpio_match[] = { + { + .compatible = "ti,omap4-gpio", + .data = &omap4_pdata, + }, + { + .compatible = "ti,omap3-gpio", + .data = &omap3_pdata, + }, + { + .compatible = "ti,omap2-gpio", + .data = &omap2_pdata, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_gpio_match); +#endif + static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, .driver = { .name = "omap_gpio", .pm = &gpio_pm_ops, + .of_match_table = of_match_ptr(omap_gpio_match), }, }; |