sh: Kill off dead code for SE and SystemH boards.

Some of these have suffered some bitrot, and so there is
some degree of dead code that has been left sitting around,
clean it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 files changed, 12 insertions, 58 deletions

diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c
index cf97901..8551157 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/renesas/systemh/io.c
@@ -15,7 +15,7 @@
 #include <asm/io.h>
 
 #include <linux/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
+#include "../../../drivers/pci/pci-sh7751.h"
 
 /*
  * The 7751 SystemH Engine uses the built-in PCI controller (PCIC)
diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c
index 755df5a..7271557 100644
--- a/arch/sh/boards/se/73180/io.c
+++ b/arch/sh/boards/se/73180/io.c
@@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port)
 	badio(inw, port);
 }
 
+#ifdef CONFIG_SMC91X
 /* MSTLANEX01 LAN at 0xb400:0000 */
 static struct iop laniop = {
 	.start = 0x300,
@@ -110,6 +111,7 @@ static struct iop laniop = {
 	.outb = simple_outb,
 	.outw = simple_outw,
 };
+#endif
 
 /* NE2000 pc card NIC */
 static struct iop neiop = {
@@ -123,6 +125,7 @@ static struct iop neiop = {
 	.outw = simple_outw,
 };
 
+#ifdef CONFIG_IDE
 /* CF in CF slot */
 static struct iop cfiop = {
 	.base = 0xb0600000,
@@ -132,12 +135,13 @@ static struct iop cfiop = {
 	.outb = pcc_outb,
 	.outw = simple_outw,
 };
+#endif
 
 static __inline__ struct iop *
 port2iop(unsigned long port)
 {
 	if (0) ;
-#if defined(CONFIG_SMC91111)
+#if defined(CONFIG_SMC91X)
 	else if (laniop.check(&laniop, port))
 		return &laniop;
 #endif
diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c
index 4344d0e..2c62b8e 100644
--- a/arch/sh/boards/se/73180/irq.c
+++ b/arch/sh/boards/se/73180/irq.c
@@ -7,7 +7,6 @@
  * Modified for SH-Mobile SolutionEngine 73180 Support
  *              by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
  *
- *
  */
 
 #include <linux/init.h>
@@ -17,14 +16,6 @@
 #include <asm/mach/se73180.h>
 
 static int
-intreq2irq(int i)
-{
-	if (i == 5)
-		return 10;
-	return 32 + 7 - i;
-}
-
-static int
 irq2intreq(int irq)
 {
 	if (irq == 10)
diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c
index 610439f..4b72e9a 100644
--- a/arch/sh/boards/se/73180/led.c
+++ b/arch/sh/boards/se/73180/led.c
@@ -14,21 +14,8 @@
 #include <linux/sched.h>
 #include <asm/mach/se73180.h>
 
-static void
-mach_led(int position, int value)
-{
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
-	if (value) {
-		*p |= (1 << LED_SHIFT);
-	} else {
-		*p &= ~(1 << LED_SHIFT);
-	}
-}
-
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_73180se(void)
+void heartbeat_73180se(void)
 {
 	static unsigned int cnt = 0, period = 0;
 	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile
index be89a73..c96ed69 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/se/770x/Makefile
@@ -2,5 +2,6 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := mach.o setup.o io.o irq.o led.o
+obj-y	 := mach.o setup.o io.o irq.o
 
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c
index 3cddbda..73e9848 100644
--- a/arch/sh/boards/se/770x/led.c
+++ b/arch/sh/boards/se/770x/led.c
@@ -9,22 +9,8 @@
  * This file contains Solution Engine specific LED code.
  */
 
-#include <asm/se/se.h>
-
-static void mach_led(int position, int value)
-{
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
-	if (value) {
-		*p |= (1<<8);
-	} else {
-		*p &= ~(1<<8);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
 #include <linux/sched.h>
+#include <asm/se/se.h>
 
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
 void heartbeat_se(void)
@@ -64,4 +50,3 @@ void heartbeat_se(void)
 	*p = 1<<(bit+8);
 
 }
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile
index ce7ca24..07bf17a 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/se/7751/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := mach.o setup.o io.o irq.o led.o
+obj-y	 := mach.o setup.o io.o irq.o
 
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_HEARTBEAT) += led.o
 
diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c
index a878726..4405e26 100644
--- a/arch/sh/boards/se/7751/led.c
+++ b/arch/sh/boards/se/7751/led.c
@@ -10,20 +10,6 @@
  */
 
 #include <asm/se7751/se7751.h>
-
-static void mach_led(int position, int value)
-{
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
-	if (value) {
-		*p |= (1<<8);
-	} else {
-		*p &= ~(1<<8);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
 #include <linux/sched.h>
 
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
@@ -64,4 +50,3 @@ void heartbeat_7751se(void)
 	*p = 1<<(bit+8);
 
 }
-#endif /* CONFIG_HEARTBEAT */