diff options
author | Jerome Brunet <jbrunet@baylibre.com> | 2017-10-12 14:40:25 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2017-10-16 23:14:10 +0200 |
commit | 277d14eb815fdfb95a72ea126bc09f75a2bd58fd (patch) | |
tree | ebfb7e132c658d3905f82a1db47566897f219038 | |
parent | fbe8749897710deffae4c77c1cdc34b31e2fc773 (diff) | |
download | op-kernel-dev-277d14eb815fdfb95a72ea126bc09f75a2bd58fd.zip op-kernel-dev-277d14eb815fdfb95a72ea126bc09f75a2bd58fd.tar.gz |
pinctrl: meson: separate soc drivers
When meson pinctrl is enabled, all meson platforms pinctrl drivers are
built in the kernel, with a significant amount of data.
This leads to situation where pinctrl drivers targeting an architecture
are also compiled and shipped on another one (ex: meson8 - ARM - compiled
and shipped on ARM64 builds). This is a waste of memory we can easily
avoid.
This change makes 4 pinctrl drivers (1 per SoC) out the original single
driver, allowing to compile and ship only the ones required.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r-- | drivers/pinctrl/Kconfig | 11 | ||||
-rw-r--r-- | drivers/pinctrl/meson/Kconfig | 34 | ||||
-rw-r--r-- | drivers/pinctrl/meson/Makefile | 8 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson.c | 54 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson.h | 11 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson8.c | 25 | ||||
-rw-r--r-- | drivers/pinctrl/meson/pinctrl-meson8b.c | 25 |
9 files changed, 139 insertions, 79 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 034822c..c0294958 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -167,16 +167,6 @@ config PINCTRL_MCP23S08 This provides a GPIO interface supporting inputs and outputs. The I2C versions of the chips can be used as interrupt-controller. -config PINCTRL_MESON - bool - depends on OF - select PINMUX - select PINCONF - select GENERIC_PINCONF - select GPIOLIB - select OF_GPIO - select REGMAP_MMIO - config PINCTRL_OXNAS bool depends on OF @@ -369,6 +359,7 @@ source "drivers/pinctrl/uniphier/Kconfig" source "drivers/pinctrl/vt8500/Kconfig" source "drivers/pinctrl/mediatek/Kconfig" source "drivers/pinctrl/zte/Kconfig" +source "drivers/pinctrl/meson/Kconfig" config PINCTRL_XWAY bool diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig new file mode 100644 index 0000000..2795a31 --- /dev/null +++ b/drivers/pinctrl/meson/Kconfig @@ -0,0 +1,34 @@ +menuconfig PINCTRL_MESON + bool "Amlogic SoC pinctrl drivers" + depends on ARCH_MESON + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO + +if PINCTRL_MESON + +config PINCTRL_MESON8 + bool "Meson 8 SoC pinctrl driver" + depends on ARM + default y + +config PINCTRL_MESON8B + bool "Meson 8b SoC pinctrl driver" + depends on ARM + default y + +config PINCTRL_MESON_GXBB + bool "Meson gxbb SoC pinctrl driver" + depends on ARM64 + default y + +config PINCTRL_MESON_GXL + bool "Meson gxl SoC pinctrl driver" + depends on ARM64 + default y + +endif diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile index 27c5b51..dc3b73f 100644 --- a/drivers/pinctrl/meson/Makefile +++ b/drivers/pinctrl/meson/Makefile @@ -1,3 +1,5 @@ -obj-y += pinctrl-meson8.o pinctrl-meson8b.o -obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o -obj-y += pinctrl-meson.o +obj-$(CONFIG_PINCTRL_MESON) += pinctrl-meson.o +obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o +obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o +obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o +obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 1881d4a..a87bdb1 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { +static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { .name = "periphs-banks", .pins = meson_gxbb_periphs_pins, .groups = meson_gxbb_periphs_groups, @@ -836,7 +836,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), }; -struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson_gxbb_aobus_pins, .groups = meson_gxbb_aobus_groups, @@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), }; + +static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson-gxbb-periphs-pinctrl", + .data = &meson_gxbb_periphs_pinctrl_data, + }, + { + .compatible = "amlogic,meson-gxbb-aobus-pinctrl", + .data = &meson_gxbb_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson_gxbb_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson-gxbb-pinctrl", + .of_match_table = meson_gxbb_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson_gxbb_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index 3a14eca..088ac94 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { +static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { .name = "periphs-banks", .pins = meson_gxl_periphs_pins, .groups = meson_gxl_periphs_groups, @@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), }; -struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson_gxl_aobus_pins, .groups = meson_gxl_aobus_groups, @@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), }; + +static const struct of_device_id meson_gxl_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson-gxl-periphs-pinctrl", + .data = &meson_gxl_periphs_pinctrl_data, + }, + { + .compatible = "amlogic,meson-gxl-aobus-pinctrl", + .data = &meson_gxl_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson_gxl_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson-gxl-pinctrl", + .of_match_table = meson_gxl_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson_gxl_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 71bccb7..525e8b1 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -50,6 +50,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> @@ -481,42 +482,6 @@ static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio) return !!(val & BIT(bit)); } -static const struct of_device_id meson_pinctrl_dt_match[] = { - { - .compatible = "amlogic,meson8-cbus-pinctrl", - .data = &meson8_cbus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8b-cbus-pinctrl", - .data = &meson8b_cbus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8-aobus-pinctrl", - .data = &meson8_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson8b-aobus-pinctrl", - .data = &meson8b_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxbb-periphs-pinctrl", - .data = &meson_gxbb_periphs_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxbb-aobus-pinctrl", - .data = &meson_gxbb_aobus_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxl-periphs-pinctrl", - .data = &meson_gxl_periphs_pinctrl_data, - }, - { - .compatible = "amlogic,meson-gxl-aobus-pinctrl", - .data = &meson_gxl_aobus_pinctrl_data, - }, - { }, -}; - static int meson_gpiolib_register(struct meson_pinctrl *pc) { int ret; @@ -624,9 +589,8 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc, return 0; } -static int meson_pinctrl_probe(struct platform_device *pdev) +int meson_pinctrl_probe(struct platform_device *pdev) { - const struct of_device_id *match; struct device *dev = &pdev->dev; struct meson_pinctrl *pc; int ret; @@ -636,10 +600,9 @@ static int meson_pinctrl_probe(struct platform_device *pdev) return -ENOMEM; pc->dev = dev; - match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node); - pc->data = (struct meson_pinctrl_data *) match->data; + pc->data = (struct meson_pinctrl_data *) of_device_get_match_data(dev); - ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node); + ret = meson_pinctrl_parse_dt(pc, dev->of_node); if (ret) return ret; @@ -659,12 +622,3 @@ static int meson_pinctrl_probe(struct platform_device *pdev) return meson_gpiolib_register(pc); } - -static struct platform_driver meson_pinctrl_driver = { - .probe = meson_pinctrl_probe, - .driver = { - .name = "meson-pinctrl", - .of_match_table = meson_pinctrl_dt_match, - }, -}; -builtin_platform_driver(meson_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h index 7ed0a80..284157d 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.h +++ b/drivers/pinctrl/meson/pinctrl-meson.h @@ -13,6 +13,7 @@ #include <linux/gpio.h> #include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/types.h> @@ -165,11 +166,5 @@ struct meson_pinctrl { #define MESON_PIN(x) PINCTRL_PIN(x, #x) -extern struct meson_pinctrl_data meson8_cbus_pinctrl_data; -extern struct meson_pinctrl_data meson8_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data; -extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data; -extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data; -extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data; -extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data; +/* Common probe function */ +int meson_pinctrl_probe(struct platform_device *pdev); diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c index fbf8ecd..68b345f 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8.c +++ b/drivers/pinctrl/meson/pinctrl-meson8.c @@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson8_cbus_pinctrl_data = { +static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { .name = "cbus-banks", .pins = meson8_cbus_pins, .groups = meson8_cbus_groups, @@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = { .num_banks = ARRAY_SIZE(meson8_cbus_banks), }; -struct meson_pinctrl_data meson8_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson8_aobus_pinctrl_data = { .name = "ao-bank", .pins = meson8_aobus_pins, .groups = meson8_aobus_groups, @@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson8_aobus_functions), .num_banks = ARRAY_SIZE(meson8_aobus_banks), }; + +static const struct of_device_id meson8_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson8-cbus-pinctrl", + .data = &meson8_cbus_pinctrl_data, + }, + { + .compatible = "amlogic,meson8-aobus-pinctrl", + .data = &meson8_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson8_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson8-pinctrl", + .of_match_table = meson8_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson8_pinctrl_driver); diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index 7af296d..4d61df0 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = { BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), }; -struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { +static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { .name = "cbus-banks", .pins = meson8b_cbus_pins, .groups = meson8b_cbus_groups, @@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { .num_banks = ARRAY_SIZE(meson8b_cbus_banks), }; -struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { +static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { .name = "aobus-banks", .pins = meson8b_aobus_pins, .groups = meson8b_aobus_groups, @@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = { .num_funcs = ARRAY_SIZE(meson8b_aobus_functions), .num_banks = ARRAY_SIZE(meson8b_aobus_banks), }; + +static const struct of_device_id meson8b_pinctrl_dt_match[] = { + { + .compatible = "amlogic,meson8b-cbus-pinctrl", + .data = &meson8b_cbus_pinctrl_data, + }, + { + .compatible = "amlogic,meson8b-aobus-pinctrl", + .data = &meson8b_aobus_pinctrl_data, + }, + { }, +}; + +static struct platform_driver meson8b_pinctrl_driver = { + .probe = meson_pinctrl_probe, + .driver = { + .name = "meson8b-pinctrl", + .of_match_table = meson8b_pinctrl_dt_match, + }, +}; +builtin_platform_driver(meson8b_pinctrl_driver); |