Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string

35 files changed, 179 insertions, 57 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index de0ac03..a226416 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1001,6 +1001,7 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
 M:	Baruch Siach <baruch@tkos.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 0d35ab6..7106114 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -74,6 +74,7 @@
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -438,41 +439,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 9c7fb0a..4e42f30c 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -22,6 +22,7 @@
 			MATRIX_KEY(0x00, 0x02, KEY_F1)
 			MATRIX_KEY(0x00, 0x03, KEY_B)
 			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
 			MATRIX_KEY(0x00, 0x06, KEY_N)
 			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
 			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +35,7 @@
 			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
 			MATRIX_KEY(0x01, 0x09, KEY_F9)
 			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
 
 			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
 			MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +47,7 @@
 			MATRIX_KEY(0x02, 0x07, KEY_102ND)
 			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
 			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
 
 			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
 			MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -53,6 +56,7 @@
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
 			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
 			MATRIX_KEY(0x04, 0x01, KEY_A)
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c892d58..b995333 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -468,6 +468,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc215e4..b69be5c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -108,7 +108,7 @@
 			};
 
 			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
 				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
 			};
 
 			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
 				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
 			};
 
 			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
 				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
 			};
 
 			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
 				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
 			};
 
 			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
 				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
 			};
 
 			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
 				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5e..ab4ba39 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -295,9 +295,10 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
 	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 50e555e..1b6494f 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,7 +86,7 @@
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
-		pcie@21020000 {
+		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
 			clock-names = "pcie";
@@ -96,6 +96,7 @@
 			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
 				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c06542b..e7a6f6d 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -286,7 +286,7 @@
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
-		pcie@21800000 {
+		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
 			clock-names = "pcie";
@@ -296,6 +296,7 @@
 			ranges = <0x81000000 0 0 0x23250000 0 0x4000
 				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 233c69e..df8908a 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -120,7 +120,7 @@
 
 	lcd0: display@0 {
 		compatible = "lgphilips,lb035q02";
-		label = "lcd";
+		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
 		spi-max-frequency = <10000000>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index f5395b7..048fd21 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -98,7 +98,7 @@
 
 	lcd0: display@0 {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
+		label = "lcd43";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&lte430_pins>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index f884d6a..7d31c6f 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -551,6 +551,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -558,6 +559,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7d24ae0..c8fd648 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -612,6 +612,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -619,6 +620,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 71468a7..5e17fd1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -60,27 +60,27 @@
 	rxc-skew-ps = <2000>;
 };
 
-&mmc0 {
-	vmmc-supply = <&regulator_3_3v>;
-	vqmmc-supply = <&regulator_3_3v>;
-};
-
-&usb1 {
-	status = "okay";
-};
-
 &gpio2 {
 	status = "okay";
 };
 
-&i2c1{
+&i2c1 {
 	status = "okay";
 
-	accel1: accel1@53{
-		compatible = "adxl34x";
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
 		reg = <0x53>;
 
-		interrupt-parent = < &portc >;
+		interrupt-parent = <&portc>;
 		interrupts = <3 2>;
 	};
 };
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
index 32dd55e..6eaaf63 100644
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson U8540 platform with Device Tree";
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 651c56d..c8b8158 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -16,6 +16,13 @@
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
 	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 853684a..a75f328 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -971,7 +971,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		uart@80120000 {
+		ux500_serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -986,7 +986,7 @@
 			status = "disabled";
 		};
 
-		uart@80121000 {
+		ux500_serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1001,7 +1001,7 @@
 			status = "disabled";
 		};
 
-		uart@80007000 {
+		ux500_serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 744c1e3..6d8ce15 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -32,11 +32,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 2b1cb5b..18e9795 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 59523f8..2473991 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -16,4 +16,11 @@
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 7f3975b..b0278f4 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -23,6 +23,11 @@
 	};
 
 	soc {
+		/* Enable UART1 on this board */
+		uart@80121000 {
+			status = "okay";
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 8c6a2de..c2e1ba0 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -19,6 +19,13 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index d53cccd..ebd8547 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -18,4 +18,11 @@
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index a4bc9e7..810cda7 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,15 +43,26 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
+				  <&touch_hrefv60_mode>,
+				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
 				sdi0_default_mode: sdi0_default {
+					/* SD card detect GPIO pin, extend default state */
 					default_hrefv60_cfg1 {
 						pins = "GPIO95_E8";
 						ste,config = <&gpio_in_pu>;
 					};
+					/* VMMCI level-shifter enable */
+					default_hrefv60_cfg2 {
+						pins = "GPIO169_D22";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					default_hrefv60_cfg3 {
+						pins = "GPIO5_AG6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ipgpio {
@@ -213,6 +224,16 @@
 					};
 				};
 			};
+			gpios {
+				/* Dangling GPIO pins */
+				gpios_hrefv60_mode: gpios_hrefv60 {
+					default_cfg1 {
+						/* Normally UART1 RXD, now dangling */
+						pins = "GPIO4_AH6";
+						ste,config = <&in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 9edadc3..32a5ccb 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -18,6 +18,13 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -223,11 +230,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
@@ -452,7 +459,21 @@
 						pins = "GPIO21_AB3"; /* DAT31DIR */
 						ste,config = <&out_hi>;
 					};
-
+					/* SD card detect GPIO pin, extend default state */
+					snowball_cfg2 {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					snowball_cfg3 {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					snowball_cfg4 {
+						pins = "GPIO228_AJ6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ssp0 {
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 80bad29..8c4467f 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void)
 	}
 }
 
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-
 static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
 {
 	int iso, iso2sw;
@@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	bool is_off;
 	int i;
 
 	imx6q_pu_domain.reg = pu_reg;
@@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	}
 	imx6q_pu_domain.num_clks = i;
 
-	is_off = IS_ENABLED(CONFIG_PM);
-	if (is_off) {
-		_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-	} else {
-		/*
-		 * Enable power if compiled without CONFIG_PM in case the
-		 * bootloader disabled it.
-		 */
-		imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-	}
+	/* Enable power always in case bootloader disabled it. */
+	imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+
+	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
+		return 0;
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
 	return of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
 
@@ -437,13 +429,6 @@ clk_err:
 	return -EINVAL;
 }
 
-#else
-static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
-{
-	return 0;
-}
-#endif /* CONFIG_PM_GENERIC_DOMAINS */
-
 static int imx_gpc_probe(struct platform_device *pdev)
 {
 	struct regulator *pu_reg;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ecc04ff..4a023e8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -60,6 +60,7 @@ config SOC_AM43XX
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_ARM_SCU
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index c092730..bf366b3 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -24,6 +24,7 @@
 #include <linux/ata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -144,6 +145,8 @@ static void __init capc7117_init(void)
 
 	capc7117_uarts_init();
 	capc7117_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(CAPC7117,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bb99f59..a17a91e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -13,6 +13,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/dm9000.h>
 #include <linux/leds.h>
@@ -466,6 +467,8 @@ static void __init cmx2xx_init(void)
 	cmx2xx_init_ac97();
 	cmx2xx_init_touchscreen();
 	cmx2xx_init_leds();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cmx2xx_init_irq(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 4d3588d..5851f4c 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -835,6 +835,8 @@ static void __init cm_x300_init(void)
 	cm_x300_init_ac97();
 	cm_x300_init_wi2wi();
 	cm_x300_init_bl();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 5f9d930..3503826 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -18,6 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
 #include <linux/ucb1400.h>
 
 #include <asm/mach/arch.h>
@@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void)
 		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 				colibri_pxa270_baseboard);
 	}
+
+	regulator_has_full_constraints();
 }
 
 /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 51531ec..9d7072b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1306,6 +1306,8 @@ static void __init em_x270_init(void)
 	em_x270_init_i2c();
 	em_x270_init_camera();
 	em_x270_userspace_consumers_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index c98511c..9b0eb02 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -26,6 +26,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/machine.h>
 
 #include "generic.h"
 
@@ -185,6 +186,8 @@ static void __init icontrol_init(void)
 	mxm_8x10_mmc_init();
 
 	icontrol_can_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 872dcb2..066e3a2 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
@@ -534,6 +535,8 @@ static void __init trizeps4_init(void)
 
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
+
+	regulator_has_full_constraints();
 }
 
 static void __init trizeps4_map_io(void)
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index aa89488..54122a9 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -24,6 +24,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/machine.h>
 #include <linux/regulator/max1586.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -711,6 +712,8 @@ static void __init vpac270_init(void)
 	vpac270_ts_init();
 	vpac270_rtc_init();
 	vpac270_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index ac2ae5c..6158566f 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -868,6 +868,8 @@ static void __init zeus_init(void)
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
 	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
 	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
+
+	regulator_has_full_constraints();
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {