summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRobert P. J. Day <rpjday@mindspring.com>2007-10-19 23:10:43 +0200
committerAdrian Bunk <bunk@kernel.org>2007-10-19 23:10:43 +0200
commit3a4fa0a25da81600ea0bcd75692ae8ca6050d165 (patch)
treea4de1662e645c029cf3cf58f0646cbb1959861dc
parent18735dd8d2d37031b97f9e9e106acbaed01eb896 (diff)
downloadop-kernel-dev-3a4fa0a25da81600ea0bcd75692ae8ca6050d165.zip
op-kernel-dev-3a4fa0a25da81600ea0bcd75692ae8ca6050d165.tar.gz
Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
-rw-r--r--Documentation/filesystems/Locking2
-rw-r--r--Documentation/mips/AU1xxx_IDE.README2
-rw-r--r--arch/arm/mach-at91/gpio.c2
-rw-r--r--arch/arm/mach-s3c2410/clock.c2
-rw-r--r--arch/arm/mach-s3c2412/clock.c2
-rw-r--r--arch/arm/mach-s3c2443/clock.c2
-rw-r--r--arch/cris/arch-v10/drivers/pcf8563.c2
-rw-r--r--arch/cris/arch-v32/drivers/pcf8563.c2
-rw-r--r--arch/h8300/kernel/irq.c2
-rw-r--r--arch/m68knommu/platform/5307/pit.c2
-rw-r--r--arch/mips/kernel/module.c2
-rw-r--r--arch/mips/pci/pci-excite.c2
-rw-r--r--arch/mips/sni/pcimt.c2
-rw-r--r--arch/powerpc/platforms/celleb/scc_uhc.c2
-rw-r--r--arch/sh64/kernel/pci_sh5.c2
-rw-r--r--arch/x86/kernel/suspend_64.c2
-rw-r--r--drivers/ata/ahci.c2
-rw-r--r--drivers/ata/libata-sff.c2
-rw-r--r--drivers/ata/pata_cs5530.c2
-rw-r--r--drivers/ata/pata_cs5535.c2
-rw-r--r--drivers/ata/pata_it821x.c4
-rw-r--r--drivers/ata/pata_mpiix.c2
-rw-r--r--drivers/ata/pata_ns87410.c2
-rw-r--r--drivers/ata/pata_oldpiix.c2
-rw-r--r--drivers/ata/pata_radisys.c2
-rw-r--r--drivers/ata/pata_sc1200.c2
-rw-r--r--drivers/ata/pata_sil680.c2
-rw-r--r--drivers/ata/pata_via.c2
-rw-r--r--drivers/atm/firestream.c2
-rw-r--r--drivers/block/rd.c2
-rw-r--r--drivers/char/n_tty.c4
-rw-r--r--drivers/char/rocket.c2
-rw-r--r--drivers/char/tty_io.c8
-rw-r--r--drivers/char/tty_ioctl.c2
-rw-r--r--drivers/ide/ide-tape.c2
-rw-r--r--drivers/ide/pci/it821x.c4
-rw-r--r--drivers/ide/pci/siimage.c2
-rw-r--r--drivers/md/dm-crypt.c2
-rw-r--r--drivers/media/dvb/bt8xx/bt878.c2
-rw-r--r--drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c2
-rw-r--r--drivers/media/video/bt8xx/bttv-cards.c22
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c2
-rw-r--r--drivers/misc/sony-laptop.c2
-rw-r--r--drivers/net/amd8111e.c2
-rw-r--r--drivers/net/au1000_eth.c2
-rw-r--r--drivers/net/bonding/bond_sysfs.c2
-rw-r--r--drivers/net/e100.c2
-rw-r--r--drivers/net/irda/donauboe.c2
-rw-r--r--drivers/net/smc911x.c2
-rw-r--r--drivers/net/spider_net.c2
-rw-r--r--drivers/net/tc35815.c4
-rw-r--r--drivers/net/via-velocity.c2
-rw-r--r--drivers/s390/block/dasd_3990_erp.c2
-rw-r--r--drivers/s390/char/sclp_cpi.c2
-rw-r--r--drivers/scsi/aacraid/aacraid.h2
-rw-r--r--drivers/scsi/aic7xxx/cam.h2
-rw-r--r--drivers/scsi/dc395x.c6
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c2
-rw-r--r--drivers/scsi/qla4xxx/ql4_init.c2
-rw-r--r--drivers/scsi/sd.c2
-rw-r--r--drivers/spi/mpc52xx_psc_spi.c2
-rw-r--r--drivers/usb/host/ehci-hub.c2
-rw-r--r--drivers/usb/host/sl811-hcd.c2
-rw-r--r--fs/jfs/jfs_dtree.c2
-rw-r--r--fs/ocfs2/dcache.c2
-rw-r--r--fs/reiserfs/super.c2
-rw-r--r--fs/super.c4
-rw-r--r--include/asm-arm/dma-mapping.h2
-rw-r--r--include/asm-mips/pci/bridge.h2
-rw-r--r--include/asm-sh/se7751.h2
-rw-r--r--include/asm-sh/systemh7751.h2
-rw-r--r--include/linux/ipmi_smi.h2
-rw-r--r--kernel/hrtimer.c2
-rw-r--r--kernel/sched.c4
-rw-r--r--kernel/taskstats.c2
-rw-r--r--lib/kobject_uevent.c2
-rw-r--r--net/irda/discovery.c2
-rw-r--r--net/iucv/iucv.c2
-rw-r--r--net/netfilter/xt_CONNMARK.c2
-rw-r--r--net/netfilter/xt_connmark.c2
-rw-r--r--net/sched/em_meta.c2
-rw-r--r--sound/core/seq/seq_midi_emul.c8
-rw-r--r--sound/drivers/opl3/opl3_midi.c2
-rw-r--r--sound/isa/es18xx.c4
-rw-r--r--sound/mips/au1x00.c8
-rw-r--r--sound/pci/au88x0/au88x0.c2
-rw-r--r--sound/soc/soc-core.c2
-rw-r--r--sound/soc/soc-dapm.c2
-rw-r--r--sound/synth/emux/emux_synth.c2
89 files changed, 117 insertions, 117 deletions
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index fe26cc9..37c10cb 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -224,7 +224,7 @@ against the page the filesystem should redirty the page with
redirty_page_for_writepage(), then unlock the page and return zero.
This may also be done to avoid internal deadlocks, but rarely.
-If the filesytem is called for sync then it must wait on any
+If the filesystem is called for sync then it must wait on any
in-progress I/O and then start new I/O.
The filesystem should unlock the page synchronously, before returning to the
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index afb31c1..5c83341 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -59,7 +59,7 @@ Four configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
- controler
+ controller
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
per descriptor
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index ba4a1bb..aa2d365 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -439,7 +439,7 @@ void __init at91_gpio_irq_setup(void)
for (i = 0; i < 32; i++, pin++) {
/*
* Can use the "simple" and not "edge" handler since it's
- * shorter, and the AIC handles interupts sanely.
+ * shorter, and the AIC handles interrupts sanely.
*/
set_irq_chip(pin, &gpio_irqchip);
set_irq_handler(pin, handle_simple_irq);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index cab9d62..2bfaa61 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -238,7 +238,7 @@ int __init s3c2410_baseclk_add(void)
}
/* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsytems such as the LCD which do
+ * be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 8543dd6..4589936 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -689,7 +689,7 @@ int __init s3c2412_baseclk_add(void)
}
/* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsytems such as the LCD which do
+ * be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 5840294..b42f956 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1005,7 +1005,7 @@ void __init s3c2443_init_clocks(int xtal)
}
/* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsytems such as the LCD which do
+ * be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 1de0026..c263b82 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -4,7 +4,7 @@
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interupt output and voltage
+ * consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index da479a1..6dbd700 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -4,7 +4,7 @@
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interupt output and voltage
+ * consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
index 43d21e9..8dec4dd 100644
--- a/arch/h8300/kernel/irq.c
+++ b/arch/h8300/kernel/irq.c
@@ -68,7 +68,7 @@ static void h8300_shutdown_irq(unsigned int irq)
}
/*
- * h8300 interrupt controler implementation
+ * h8300 interrupt controller implementation
*/
struct irq_chip h8300irq_chip = {
.name = "H8300-INTC",
diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c
index e53c446..f18352f 100644
--- a/arch/m68knommu/platform/5307/pit.c
+++ b/arch/m68knommu/platform/5307/pit.c
@@ -83,7 +83,7 @@ unsigned long coldfire_pit_offset(void)
/*
* If we are still in the first half of the upcount and a
- * timer interupt is pending, then add on a ticks worth of time.
+ * timer interrupt is pending, then add on a ticks worth of time.
*/
offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr;
if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT))
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index cb08014..e7ed0ac 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr)
return e;
}
-/* Put in dbe list if neccessary. */
+/* Put in dbe list if necessary. */
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c
index 3c86c77..8a56876 100644
--- a/arch/mips/pci/pci-excite.c
+++ b/arch/mips/pci/pci-excite.c
@@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void)
ocd_writel(0x00000000, bar + 0x100);
}
- /* Finally, enable the PCI interupt */
+ /* Finally, enable the PCI interrupt */
#if USB_IRQ > 7
set_c0_intcontrol(1 << USB_IRQ);
#else
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 39bb15f..4df070f 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -246,7 +246,7 @@ static void pcimt_hwint1(void)
/*
* Note: ASIC PCI's builtin interrupt achknowledge feature is
* broken. Using it may result in loss of some or all i8259
- * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+ * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
*/
irq = i8259_irq();
if (unlikely(irq < 0))
diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c
index a7c548b..b59c38a 100644
--- a/arch/powerpc/platforms/celleb/scc_uhc.c
+++ b/arch/powerpc/platforms/celleb/scc_uhc.c
@@ -36,7 +36,7 @@ static inline int uhc_clkctrl_ready(u32 val)
}
/*
- * UHC(usb host controler) enable function.
+ * UHC(usb host controller) enable function.
* affect to both of OHCI and EHCI core module.
*/
static void enable_scc_uhc(struct pci_dev *dev)
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
index 388bb71..b4d9534 100644
--- a/arch/sh64/kernel/pci_sh5.c
+++ b/arch/sh64/kernel/pci_sh5.c
@@ -480,7 +480,7 @@ static int __init pcibios_init(void)
return -EINVAL;
}
- /* The pci subsytem needs to know where memory is and how much
+ /* The pci subsystem needs to know where memory is and how much
* of it there is. I've simply made these globals. A better mechanism
* is probably needed.
*/
diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c
index f8fafe5..76274ee 100644
--- a/arch/x86/kernel/suspend_64.c
+++ b/arch/x86/kernel/suspend_64.c
@@ -123,7 +123,7 @@ void fix_processor_context(void)
int cpu = smp_processor_id();
struct tss_struct *t = &per_cpu(init_tss, cpu);
- set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
+ set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9;
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 10bc3f6..47c8060 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1479,7 +1479,7 @@ static void ahci_port_intr(struct ata_port *ap)
return;
}
- /* hmmm... a spurious interupt */
+ /* hmmm... a spurious interrupt */
/* if !NCQ, ignore. No modern ATA device has broken HSM
* implementation for non-NCQ commands.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f9e4cd5..8227c45 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -856,7 +856,7 @@ err_out:
* @pdev: PCI device
*
* Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the neccessary logic to
+ * enter non simplex mode. This implements the necessary logic to
* perform the task on such devices. Calling it on other devices will
* have -undefined- behaviour.
*/
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 57e827e..e1818fd 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -138,7 +138,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary. Specifically we have a problem that there is only
+ * necessary. Specifically we have a problem that there is only
* one MWDMA/UDMA bit.
*/
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 3578593..0132453 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -25,7 +25,7 @@
* Documentation:
* Available from AMD web site.
* TODO
- * Review errata to see if serializing is neccessary
+ * Review errata to see if serializing is necessary
*/
#include <linux/kernel.h>
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 988ef73..ca9aae0 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -105,7 +105,7 @@ struct it821x_dev
/*
* We allow users to force the card into non raid mode without
- * flashing the alternative BIOS. This is also neccessary right now
+ * flashing the alternative BIOS. This is also necessary right now
* for embedded platforms that cannot run a PC BIOS but are using this
* device.
*/
@@ -383,7 +383,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc)
* @ap: ATA port
* @device: Device number (not pointer)
*
- * Device selection hook. If neccessary perform clock switching
+ * Device selection hook. If necessary perform clock switching
*/
static void it821x_passthru_dev_select(struct ata_port *ap,
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index d548308..c0d9e0c 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -129,7 +129,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ * necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 6e8e557..9fe66fd 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -124,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary.
+ * necessary.
*/
static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 3cd5eb2..44da09a 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -200,7 +200,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ * necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index d5b7649..8109b08 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ * necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 21ebc48..725a858 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -156,7 +156,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
- * neccessary. Specifically we have a problem that there is only
+ * necessary. Specifically we have a problem that there is only
* one MWDMA/UDMA bit.
*/
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 4dc2e73..5c1e9cb 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -16,7 +16,7 @@
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
- * if neccessary
+ * if necessary
*
* TODO
* If we know all our devices are LBA28 (or LBA28 sized) we could use
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 5d41b66..ea7a9a6 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -420,7 +420,7 @@ static struct ata_port_operations via_port_ops_noirq = {
* @pdev: PCI device
* @flags: configuration flags
*
- * Set the FIFO properties for this device if neccessary. Used both on
+ * Set the FIFO properties for this device if necessary. Used both on
* set up and on and the resume path
*/
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 94ebc9d..f8f7139 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1596,7 +1596,7 @@ static irqreturn_t fs_irq (int irq, void *dev_id)
/* print the bits in the ISR register. */
if (fs_debug & FS_DEBUG_IRQ) {
- /* The FS_DEBUG things are unneccesary here. But this way it is
+ /* The FS_DEBUG things are unnecessary here. But this way it is
clear for grep that these are debug prints. */
fs_dprintk (FS_DEBUG_IRQ, "IRQ status:");
for (i=0;i<27;i++)
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 08176d2..47f8ac6 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -365,7 +365,7 @@ static int rd_open(struct inode *inode, struct file *filp)
/*
* Deep badness. rd_blkdev_pagecache_IO() needs to allocate
* pagecache pages within a request_fn. We cannot recur back
- * into the filesytem which is mounted atop the ramdisk, because
+ * into the filesystem which is mounted atop the ramdisk, because
* that would deadlock on fs locks. And we really don't want
* to reenter rd_blkdev_pagecache_IO when we're already within
* that function.
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 0380569..596c717 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -437,7 +437,7 @@ static inline void finish_erasing(struct tty_struct *tty)
* @c: character input
* @tty: terminal device
*
- * Perform erase and neccessary output when an erase character is
+ * Perform erase and necessary output when an erase character is
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
*/
@@ -657,7 +657,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* @c: character
*
* Process a parity error and queue the right data to indicate
- * the error case if neccessary. Locking as per n_tty_receive_buf.
+ * the error case if necessary. Locking as per n_tty_receive_buf.
*/
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 7e6a3a4..d83419c 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -563,7 +563,7 @@ static void rp_do_poll(unsigned long dummy)
/* Get a ptr to the board's control struct */
ctlp = sCtlNumToCtlPtr(ctrl);
- /* Get the interupt status from the board */
+ /* Get the interrupt status from the board */
#ifdef CONFIG_PCI
if (ctlp->BusType == isPCI)
CtlMask = sPCIGetControllerIntStatus(ctlp);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 13a5357..f36fecd 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -943,7 +943,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref);
* @tty: terminal to activate ldisc on
*
* Set the TTY_LDISC flag when the line discipline can be called
- * again. Do neccessary wakeups for existing sleepers.
+ * again. Do necessary wakeups for existing sleepers.
*
* Note: nobody should set this bit except via this function. Clearing
* directly is allowed.
@@ -1504,7 +1504,7 @@ EXPORT_SYMBOL(tty_hangup);
*
* The user has asked via system call for the terminal to be hung up.
* We do this synchronously so that when the syscall returns the process
- * is complete. That guarantee is neccessary for security reasons.
+ * is complete. That guarantee is necessary for security reasons.
*/
void tty_vhangup(struct tty_struct * tty)
@@ -1691,7 +1691,7 @@ EXPORT_SYMBOL(stop_tty);
* @tty: tty to start
*
* Start a tty that has been stopped if at all possible. Perform
- * any neccessary wakeups and propagate the TIOCPKT status. If this
+ * any necessary wakeups and propagate the TIOCPKT status. If this
* is the tty was previous stopped and is being started then the
* driver start method is invoked and the line discipline woken.
*
@@ -2877,7 +2877,7 @@ static int tty_fasync(int fd, struct file * filp, int on)
* @tty: tty to fake input into
* @p: pointer to character
*
- * Fake input to a tty device. Does the neccessary locking and
+ * Fake input to a tty device. Does the necessary locking and
* input management.
*
* FIXME: does not honour flow control ??
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 0def089..7a00350 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -444,7 +444,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio
* @arg: user data
* @opt: option information
*
- * Helper function to prepare termios data and run neccessary other
+ * Helper function to prepare termios data and run necessary other
* functions before using change_termios to do the actual changes.
*
* Locking:
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1fa5794..b463cef 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -565,7 +565,7 @@ typedef struct os_dat_s {
* The following parameter is used to select the point in the internal
* tape fifo in which we will start to refill the buffer. Decreasing
* the following parameter will improve the system's latency and
- * interactive response, while using a high value might improve sytem
+ * interactive response, while using a high value might improve system
* throughput.
*/
#define IDETAPE_FIFO_THRESHOLD 2
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index ec45b72..08e820e 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -95,7 +95,7 @@ struct it821x_dev
/*
* We allow users to force the card into non raid mode without
- * flashing the alternative BIOS. This is also neccessary right now
+ * flashing the alternative BIOS. This is also necessary right now
* for embedded platforms that cannot run a PC BIOS but are using this
* device.
*/
@@ -564,7 +564,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
/*
* Not in the docs but according to the reference driver
- * this is neccessary.
+ * this is necessary.
*/
pci_read_config_byte(hwif->pci_dev, 0x08, &conf);
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 689786d..1353afb 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -26,7 +26,7 @@
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
- * if neccessary
+ * if necessary
*
* The Dell DRAC4 has some interesting features including effectively hot
* unplugging/replugging the virtual CD interface when the DRAC is reset.
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 64fee90..4a5849b 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -112,7 +112,7 @@ static void clone_init(struct dm_crypt_io *, struct bio *);
* Different IV generation algorithms:
*
* plain: the initial vector is the 32-bit little-endian version of the sector
- * number, padded with zeros if neccessary.
+ * number, padded with zeros if necessary.
*
* essiv: "encrypted sector|salt initial vector", the sector number is
* encrypted with the bulk cipher using a salt as key. The salt
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index eca602d..85e36a1d 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -280,7 +280,7 @@ static irqreturn_t bt878_irq(int irq, void *dev_id)
if (!(astat = (stat & mask)))
return IRQ_NONE; /* this interrupt is not for me */
/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
- btwrite(astat, BT878_AINT_STAT); /* try to clear interupt condition */
+ btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */
if (astat & (BT878_ASCERR | BT878_AOCERR)) {
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 288e79f..7902ae1 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -128,7 +128,7 @@ struct ttusb {
struct dvb_frontend* fe;
};
-/* ugly workaround ... don't know why it's neccessary to read */
+/* ugly workaround ... don't know why it's necessary to read */
/* all result codes. */
#define DEBUG 0
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index dd6a7d6..3162223 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4709,18 +4709,18 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
- * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
- * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
- * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
- * GPIO[8] - - P3[5] (microcontroler)
- * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
- * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
- * GPINTR - - P3[4] (microcontroler)
+ * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
+ * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
+ * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
+ * GPIO[8] - - P3[5] (microcontroller)
+ * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
+ * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
+ * GPINTR - - P3[4] (microcontroller)
*
- * The microcontroler is a 80C32 like. It should be possible to change xpoint
- * configuration either directly (as we are doing) or using the microcontroler
+ * The microcontroller is a 80C32 like. It should be possible to change xpoint
+ * configuration either directly (as we are doing) or using the microcontroller
* which is also wired to I2C interface. I have no further info on the
- * microcontroler features, one would need to disassembly the firmware.
+ * microcontroller features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
@@ -4788,7 +4788,7 @@ static void tibetCS16_init(struct bttv *btv)
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
- * logic on the board uses logical numbers for the 4 controlers, but
+ * logic on the board uses logical numbers for the 4 controllers, but
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index b8d5327..e467682 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -907,7 +907,7 @@ static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_form
/* stop io in case it is already in progress */
if (dev->stream == STREAM_ON) {
- em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n");
+ em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n");
if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 1bfbb87..fc70fba 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -277,7 +277,7 @@ static void do_sony_laptop_release_key(struct work_struct *work)
static DECLARE_WORK(sony_laptop_release_key_work,
do_sony_laptop_release_key);
-/* forward event to the input subsytem */
+/* forward event to the input subsystem */
static void sony_laptop_report_input_event(u8 event)
{
struct input_dev *jog_dev = sony_laptop_input.jog_dev;
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 1cc74ec..eebf5bb 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1111,7 +1111,7 @@ static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
return new_stats;
}
-/* This function recalculate the interupt coalescing mode on every interrupt
+/* This function recalculate the interrupt coalescing mode on every interrupt
according to the datarate and the packet rate.
*/
static int amd8111e_calc_coalesce(struct net_device *dev)
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 185f98e..504b7ce 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -542,7 +542,7 @@ static struct {
static int num_ifs;
/*
- * Setup the base address and interupt of the Au1xxx ethernet macs
+ * Setup the base address and interrupt of the Au1xxx ethernet macs
* based on cpu type and whether the interface is enabled in sys_pinfunc
* register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
*/
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 80c0c8c..855dc10 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -55,7 +55,7 @@ static int expected_refcount = -1;
static struct class *netdev_class;
/*--------------------------- Data Structures -----------------------------*/
-/* Bonding sysfs lock. Why can't we just use the subsytem lock?
+/* Bonding sysfs lock. Why can't we just use the subsystem lock?
* Because kobject_register tries to acquire the subsystem lock. If
* we already hold the lock (which we would if the user was creating
* a new bond through the sysfs interface), we deadlock.
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 64f35e2..3dbaec6 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1324,7 +1324,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
if (!--counter) break;
}
- /* ack any interupts, something could have been set */
+ /* ack any interrupts, something could have been set */
iowrite8(~0, &nic->csr->scb.stat_ack);
/* if the command failed, or is not OK, notify and return */
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index a82d8f9..1257e1a 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -595,7 +595,7 @@ toshoboe_startchip (struct toshoboe_cb *self)
OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1);
OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2);
- /*Enable DMA controler in byte mode and RX */
+ /*Enable DMA controller in byte mode and RX */
OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
/* Start up the clocks */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 7c60df4..dd18af0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1223,7 +1223,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
}
#endif
- /* Handle PHY interupt condition */
+ /* Handle PHY interrupt condition */
if (status & INT_STS_PHY_INT_) {
DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
smc911x_phy_interrupt(dev);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 571060a..bccae7e 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1639,7 +1639,7 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
/**
* spider_net_interrupt - interrupt handler for spider_net
- * @irq: interupt number
+ * @irq: interrupt number
* @ptr: pointer to net_device
* @regs: PU registers
*
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 8038f28..d887c05 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1654,7 +1654,7 @@ tc35815_rx(struct net_device *dev)
panic_queues(dev);
}
#endif
- /* pass BD to controler */
+ /* pass BD to controller */
#ifndef TC35815_USE_PACKEDBUFFER
if (!lp->rx_skbs[curid].skb) {
lp->rx_skbs[curid].skb =
@@ -1694,7 +1694,7 @@ tc35815_rx(struct net_device *dev)
}
#endif
for (i = 0; i < (bd_count + 1) / 2 + 1; i++) {
- /* pass FD to controler */
+ /* pass FD to controller */
#ifdef DEBUG
lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead);
#else
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 4ae0579..5c4a92d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1648,7 +1648,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
*
* Scan the queues looking for transmitted packets that
* we can complete and clean up. Update any statistics as
- * neccessary/
+ * necessary/
*/
static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 8b9d68f..69402f3 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2001,7 +2001,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
switch (sense[28]) {
case 0x17:
/* issue a Diagnostic Control command with an
- * Inhibit Write subcommand and controler modifier */
+ * Inhibit Write subcommand and controller modifier */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;
diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c
index 29fe2a5..82a13d9 100644
--- a/drivers/s390/char/sclp_cpi.c
+++ b/drivers/s390/char/sclp_cpi.c
@@ -157,7 +157,7 @@ cpi_prepare_req(void)
sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
- /* set sytem level */
+ /* set system level */
evb->system_level = LINUX_VERSION_CODE;
/* set sysplex name */
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 03b5102..9abba8b 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1526,7 +1526,7 @@ struct aac_mntent {
__le32 capacityhigh;
};
-#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */
+#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */
#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */
diff --git a/drivers/scsi/aic7xxx/cam.h b/drivers/scsi/aic7xxx/cam.h
index 26f17e3..687aef6 100644
--- a/drivers/scsi/aic7xxx/cam.h
+++ b/drivers/scsi/aic7xxx/cam.h
@@ -48,7 +48,7 @@ typedef enum {
CAM_REQ_ABORTED, /* CCB request aborted by the host */
CAM_UA_ABORT, /* Unable to abort CCB request */
CAM_REQ_CMP_ERR, /* CCB request completed with an error */
- CAM_BUSY, /* CAM subsytem is busy */
+ CAM_BUSY, /* CAM subsystem is busy */
CAM_REQ_INVALID, /* CCB request was invalid */
CAM_PATH_INVALID, /* Supplied Path ID is invalid */
CAM_SEL_TIMEOUT, /* Target Selection Timeout */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index fd42d47..a9def6e 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1808,12 +1808,12 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
irqreturn_t handled = IRQ_NONE;
/*
- * Check for pending interupt
+ * Check for pending interrupt
*/
scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
if (scsi_status & SCSIINTERRUPT) {
- /* interupt pending - let's process it! */
+ /* interrupt pending - let's process it! */
dc395x_handle_interrupt(acb, scsi_status);
handled = IRQ_HANDLED;
}
@@ -4579,7 +4579,7 @@ static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
if (acb->config & HCC_SCSI_RESET)
reset_scsi_bus(acb);
- /* clear any pending interupt state */
+ /* clear any pending interrupt state */
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
}
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index e4e4c6a..7877920 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -427,7 +427,7 @@ megaraid_exit(void)
* @id : pci device id of the class of controllers
*
* This routine should be called whenever a new adapter is detected by the
- * PCI hotplug susbsytem.
+ * PCI hotplug susbsystem.
*/
static int __devinit
megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 1e29f51..d692c71 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1006,7 +1006,7 @@ int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a)
* qla4xxx_start_firmware - starts qla4xxx firmware
* @ha: Pointer to host adapter structure.
*
- * This routine performs the neccessary steps to start the firmware for
+ * This routine performs the necessary steps to start the firmware for
* the QLA4010 adapter.
**/
static int qla4xxx_start_firmware(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 69f542c..a69b155 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -676,7 +676,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
* success as well). Returns a negated errno value in case of error.
*
* Note: most ioctls are forward onto the block subsystem or further
- * down in the scsi subsytem.
+ * down in the scsi subsystem.
**/
static int sd_ioctl(struct inode * inode, struct file * filp,
unsigned int cmd, unsigned long arg)
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index e9aba93..7051e6c 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -181,7 +181,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
}
- /* enable interupts and wait for wake up
+ /* enable interrupts and wait for wake up
* if just one byte is expected the Rx FIFO genererates no
* FFULL interrupt, so activate the RxRDY interrupt
*/
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 0dcb416..735db4a 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -451,7 +451,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
/* Some boards (mostly VIA?) report bogus overcurrent indications,
* causing massive log spam unless we completely ignore them. It
- * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+ * may be relevant that VIA VT8235 controllers, where PORT_POWER is
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 94d859a..ba370c5 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1556,7 +1556,7 @@ sl811h_start(struct usb_hcd *hcd)
hcd->power_budget = sl811->board->power * 2;
}
- /* enable power and interupts */
+ /* enable power and interrupts */
port_power(sl811, 1);
return 0;
diff --git a/fs/jfs/jfs_dtree.c b/fs/jfs/jfs_dtree.c
index df0b853..df25ecc 100644
--- a/fs/jfs/jfs_dtree.c
+++ b/fs/jfs/jfs_dtree.c
@@ -773,7 +773,7 @@ int dtSearch(struct inode *ip, struct component_name * key, ino_t * data,
getChild:
/* update max. number of pages to split */
if (BT_STACK_FULL(btstack)) {
- /* Something's corrupted, mark filesytem dirty so
+ /* Something's corrupted, mark filesystem dirty so
* chkdsk will fix it.
*/
jfs_error(sb, "stack overrun in dtSearch!");
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 014e739..3094ddb 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -376,7 +376,7 @@ out:
* directory locks. The dentries have already been deleted on other
* nodes via ocfs2_remote_dentry_delete().
*
- * Normally, the VFS handles the d_move() for the file sytem, after
+ * Normally, the VFS handles the d_move() for the file system, after
* the ->rename() callback. OCFS2 wants to handle this internally, so
* the new lock can be created atomically with respect to the cluster.
*/
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 57adfe9..98c3781 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -319,7 +319,7 @@ static int finish_unfinished(struct super_block *s)
/* to protect file being unlinked from getting lost we "safe" link files
being unlinked. This link will be deleted in the same transaction with last
- item of file. mounting the filesytem we scan all these links and remove
+ item of file. mounting the filesystem we scan all these links and remove
files which almost got lost */
void add_save_link(struct reiserfs_transaction_handle *th,
struct inode *inode, int truncate)
diff --git a/fs/super.c b/fs/super.c
index d28fde7..ed1b93c 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -417,7 +417,7 @@ restart:
}
/*
- * Call the ->sync_fs super_op against all filesytems which are r/w and
+ * Call the ->sync_fs super_op against all filesystems which are r/w and
* which implement it.
*
* This operation is careful to avoid the livelock which could easily happen
@@ -425,7 +425,7 @@ restart:
* is used only here. We set it against all filesystems and then clear it as
* we sync them. So redirtied filesystems are skipped.
*
- * But if process A is currently running sync_filesytems and then process B
+ * But if process A is currently running sync_filesystems and then process B
* calls sync_filesystems as well, process B will set all the s_need_sync_fs
* flags again, which will cause process A to resync everything. Fix that with
* a local mutex.
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index 678134b..1eb8aac 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -401,7 +401,7 @@ extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enu
*
* On the SA-1111, a bug limits DMA to only certain regions of RAM.
* On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering sytems, PCI inbound window is 32MB (12MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
*
* The following are helper functions used by the dmabounce subystem
*
diff --git a/include/asm-mips/pci/bridge.h b/include/asm-mips/pci/bridge.h
index b84feeb..5f4b9d4 100644
--- a/include/asm-mips/pci/bridge.h
+++ b/include/asm-mips/pci/bridge.h
@@ -538,7 +538,7 @@ typedef struct bridge_err_cmdword_s {
BRIDGE_ISR_PMU_ESIZE_FAULT)
/*
- * List of Errors which are fatal and kill the sytem
+ * List of Errors which are fatal and kill the system
*/
#define BRIDGE_ISR_ERROR_FATAL \
((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\
diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h
index 02ca934..b36792a 100644
--- a/include/asm-sh/se7751.h
+++ b/include/asm-sh/se7751.h
@@ -36,7 +36,7 @@
#define PA_LED 0xba000000 /* LED */
#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */
+#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
diff --git a/include/asm-sh/systemh7751.h b/include/asm-sh/systemh7751.h
index b143bb2..4161122 100644
--- a/include/asm-sh/systemh7751.h
+++ b/include/asm-sh/systemh7751.h
@@ -36,7 +36,7 @@
#define PA_LED 0xba000000 /* LED */
#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */
+#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index efa292a..56ae438 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -118,7 +118,7 @@ struct ipmi_smi_handlers
/* Enable/disable firmware maintenance mode. Note that this
is *not* the modes defined, this is simply an on/off
setting. The message handler does the mode handling. Note
- that this is called from interupt context, so it cannot
+ that this is called from interrupt context, so it cannot
block. */
void (*set_maintenance_mode)(void *send_info, int enable);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b2b2c2b..dabfefb 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -412,7 +412,7 @@ static int hrtimer_reprogram(struct hrtimer *timer,
/*
* When the callback is running, we do not reprogram the clock event
* device. The timer callback is either running on a different CPU or
- * the callback is executed in the hrtimer_interupt context. The
+ * the callback is executed in the hrtimer_interrupt context. The
* reprogramming is handled either by the softirq, which called the
* callback or at the end of the hrtimer_interrupt.
*/
diff --git a/kernel/sched.c b/kernel/sched.c
index afe76ec..a54bd9d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5146,7 +5146,7 @@ static int __migrate_task_irq(struct task_struct *p, int src_cpu, int dest_cpu)
}
/*
- * Figure out where task on dead CPU should go, use force if neccessary.
+ * Figure out where task on dead CPU should go, use force if necessary.
* NOTE: interrupts should be disabled by the caller
*/
static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p)
@@ -5525,7 +5525,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- /* Strictly unneccessary, as first user will wake it. */
+ /* Strictly unnecessary, as first user will wake it. */
wake_up_process(cpu_rq(cpu)->migration_thread);
break;
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 9f360f6..354e74b 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -263,7 +263,7 @@ out:
stats->version = TASKSTATS_VERSION;
/*
- * Accounting subsytems can also add calls here to modify
+ * Accounting subsystems can also add calls here to modify
* fields of taskstats.
*/
return rc;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 2e4eae5..5886147 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -126,7 +126,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
else
subsystem = kobject_name(&kset->kobj);
if (!subsystem) {
- pr_debug("unset subsytem caused the event to drop!\n");
+ pr_debug("unset subsystem caused the event to drop!\n");
return 0;
}
diff --git a/net/irda/discovery.c b/net/irda/discovery.c
index af0cea7..80c33f4 100644
--- a/net/irda/discovery.c
+++ b/net/irda/discovery.c
@@ -202,7 +202,7 @@ void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force)
/* Drop the spinlock before calling the higher layers, as
* we can't guarantee they won't call us back and create a
* deadlock. We will work on our own private data, so we
- * don't care to be interupted. - Jean II */
+ * don't care to be interrupted. - Jean II */
spin_unlock_irqrestore(&log->hb_spinlock, flags);
if(buffer == NULL)
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 983058d..a2f5a6ea 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -389,7 +389,7 @@ static void iucv_block_cpu(void *data)
* iucv_declare_cpu
* @data: unused
*
- * Declare a interupt buffer on this cpu.
+ * Declare a interrupt buffer on this cpu.
*/
static void iucv_declare_cpu(void *data)
{
diff --git a/net/netfilter/xt_CONNMARK.c b/net/netfilter/xt_CONNMARK.c
index 8cc324b..856793e 100644
--- a/net/netfilter/xt_CONNMARK.c
+++ b/net/netfilter/xt_CONNMARK.c
@@ -23,7 +23,7 @@
#include <linux/ip.h>
#include <net/checksum.h>
-MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
+MODULE_AUTHOR("Henrik Nordstrom <hno@marasystems.com>");
MODULE_DESCRIPTION("IP tables CONNMARK matching module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_CONNMARK");
diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c
index 1071fc5..9f67920 100644
--- a/net/netfilter/xt_connmark.c
+++ b/net/netfilter/xt_connmark.c
@@ -25,7 +25,7 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_connmark.h>
-MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
+MODULE_AUTHOR("Henrik Nordstrom <hno@marasystems.com>");
MODULE_DESCRIPTION("IP tables connmark match module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_connmark");
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index e998961..ceda889 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -55,7 +55,7 @@
* ppp0..9.
*
* NOTE: Certain meta values depend on other subsystems and are
- * only available if that subsytem is enabled in the kernel.
+ * only available if that subsystem is enabled in the kernel.
*/
#include <linux/module.h>
diff --git a/sound/core/seq/seq_midi_emul.c b/sound/core/seq/seq_midi_emul.c
index d7c4fb8..17b3e6f 100644
--- a/sound/core/seq/seq_midi_emul.c
+++ b/sound/core/seq/seq_midi_emul.c
@@ -71,7 +71,7 @@ static void reset_all_channels(struct snd_midi_channel_set *chset);
* such as GM, GS and XG.
* There modes that this module will run in are:
* Generic MIDI - no interpretation at all, it will just save current values
- * of controlers etc.
+ * of controllers etc.
* GM - You can use all gm_ prefixed elements of chan. Controls, RPN, NRPN,
* SysEx will be interpreded as defined in General Midi.
* GS - You can use all gs_ prefixed elements of chan. Codes for GS will be
@@ -176,7 +176,7 @@ snd_midi_process_event(struct snd_midi_op *ops,
ev->data.control.value);
break;
case SNDRV_SEQ_EVENT_NONREGPARAM:
- /* Break it back into its controler values */
+ /* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_NONREGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@@ -189,7 +189,7 @@ snd_midi_process_event(struct snd_midi_op *ops,
nrpn(ops, drv, chan, chanset);
break;
case SNDRV_SEQ_EVENT_REGPARAM:
- /* Break it back into its controler values */
+ /* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_REGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@@ -267,7 +267,7 @@ note_off(struct snd_midi_op *ops, void *drv, struct snd_midi_channel *chan,
}
/*
- * Do all driver independent operations for this controler and pass
+ * Do all driver independent operations for this controller and pass
* events that need to take place immediately to the driver.
*/
static void
diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c
index 1b6f227..3557b6e 100644
--- a/sound/drivers/opl3/opl3_midi.c
+++ b/sound/drivers/opl3/opl3_midi.c
@@ -808,7 +808,7 @@ static void snd_opl3_pitch_ctrl(struct snd_opl3 *opl3, struct snd_midi_channel *
}
/*
- * Deal with a controler type event. This includes all types of
+ * Deal with a controller type event. This includes all types of
* control events, not just the midi controllers
*/
void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan)
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index 4a7367a..c1af28f 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -623,7 +623,7 @@ static int snd_es18xx_capture_prepare(struct snd_pcm_substream *substream)
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
- /* Set DMA controler */
+ /* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
return 0;
@@ -689,7 +689,7 @@ static int snd_es18xx_playback2_prepare(struct snd_es18xx *chip,
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
- /* Set DMA controler */
+ /* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
return 0;
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index 8a61a11..24460a5 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -498,8 +498,8 @@ snd_au1000_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
int i;
spin_lock(&au1000->ac97_lock);
-/* would rather use the interupt than this polling but it works and I can't
-get the interupt driven case to work efficiently */
+/* would rather use the interrupt than this polling but it works and I can't
+get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;
@@ -535,8 +535,8 @@ snd_au1000_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short
int i;
spin_lock(&au1000->ac97_lock);
-/* would rather use the interupt than this polling but it works and I can't
-get the interupt driven case to work efficiently */
+/* would rather use the interrupt than this polling but it works and I can't
+get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index f70286a..26819e2 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -191,7 +191,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
/* Init audio core.
* This must be done before we do request_irq otherwise we can get spurious
- * interupts that we do not handle properly and make a mess of things */
+ * interrupts that we do not handle properly and make a mess of things */
if ((err = vortex_core_init(chip)) != 0) {
printk(KERN_ERR "hw core init failed\n");
goto core_out;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 91651bd..e6a67b5 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -264,7 +264,7 @@ out:
}
/*
- * Power down the audio subsytem pmdown_time msecs after close is called.
+ * Power down the audio subsystem pmdown_time msecs after close is called.
* This is to ensure there are no pops or clicks in between any music tracks
* due to DAPM power cycling.
*/
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index b3193e6..29a546f 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -24,7 +24,7 @@
* o Automatic Mic Bias support
* o Jack insertion power event initiation - e.g. hp insertion will enable
* sinks, dacs, etc
- * o Delayed powerdown of audio susbsytem to reduce pops between a quick
+ * o Delayed powerdown of audio susbsystem to reduce pops between a quick
* device reopen.
*
* Todo:
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 3733118..478369b 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -317,7 +317,7 @@ snd_emux_update_port(struct snd_emux_port *port, int update)
/*
- * Deal with a controler type event. This includes all types of
+ * Deal with a controller type event. This includes all types of
* control events, not just the midi controllers
*/
void
OpenPOWER on IntegriCloud