summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>2012-06-07 19:25:07 +0000
committerDavid S. Miller <davem@davemloft.net>2012-06-07 22:46:48 -0700
commit33d5e332b9c5ce0bf3bfd44ca2127d1773b3f2ad (patch)
treeaee97cf7c77d962610bd93c6cbabce071b36ac19
parent2d8dbb04c63e5369988f008bc4df3359c01d8812 (diff)
downloadop-kernel-dev-33d5e332b9c5ce0bf3bfd44ca2127d1773b3f2ad.zip
op-kernel-dev-33d5e332b9c5ce0bf3bfd44ca2127d1773b3f2ad.tar.gz
stmmac: fix driver built w/ w/o both pci and platf modules
The commit ba27ec66ffeb78cbf fixes the Kconfig of the driver when built as module allowing to select/unselect the PCI and Platform modules that are not anymore mutually exclusive. This patch fixes and guarantees that the driver builds on all the platforms w/ w/o PCI and when select/unselect the two stmmac supports. In case of there are some problems on both the configuration and the pci/pltf registration the module_init will fail. v2: set the CONFIG_STMMAC_PLATFORM enabled by default. I've just noticed that this can actually help on some configurations that don't enable any STMMAC options by default (e.g. SPEAr). v3: change printk level when do not register the driver. Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h60
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c23
3 files changed, 72 insertions, 12 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0076f77..9f44827 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -15,6 +15,7 @@ if STMMAC_ETH
config STMMAC_PLATFORM
bool "STMMAC Platform bus support"
depends on STMMAC_ETH
+ default y
---help---
This selects the platform specific bus support for
the stmmac device driver. This is the driver used
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6d07ba2..94b21b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
+#include <linux/pci.h>
#include "common.h"
#ifdef CONFIG_STMMAC_TIMER
#include "stmmac_timer.h"
@@ -95,8 +96,6 @@ extern int stmmac_mdio_register(struct net_device *ndev);
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
-extern struct pci_driver stmmac_pci_driver;
-extern struct platform_driver stmmac_pltfr_driver;
int stmmac_freeze(struct net_device *ndev);
int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
@@ -144,3 +143,60 @@ static inline int stmmac_clk_get(struct stmmac_priv *priv)
return 0;
}
#endif /* CONFIG_HAVE_CLK */
+
+
+#ifdef CONFIG_STMMAC_PLATFORM
+extern struct platform_driver stmmac_pltfr_driver;
+static inline int stmmac_register_platform(void)
+{
+ int err;
+
+ err = platform_driver_register(&stmmac_pltfr_driver);
+ if (err)
+ pr_err("stmmac: failed to register the platform driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_platform(void)
+{
+ platform_driver_register(&stmmac_pltfr_driver);
+}
+#else
+static inline int stmmac_register_platform(void)
+{
+ pr_debug("stmmac: do not register the platf driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_platform(void)
+{
+}
+#endif /* CONFIG_STMMAC_PLATFORM */
+
+#ifdef CONFIG_STMMAC_PCI
+extern struct pci_driver stmmac_pci_driver;
+static inline int stmmac_register_pci(void)
+{
+ int err;
+
+ err = pci_register_driver(&stmmac_pci_driver);
+ if (err)
+ pr_err("stmmac: failed to register the PCI driver\n");
+
+ return err;
+}
+static inline void stmmac_unregister_pci(void)
+{
+ pci_unregister_driver(&stmmac_pci_driver);
+}
+#else
+static inline int stmmac_register_pci(void)
+{
+ pr_debug("stmmac: do not register the PCI driver\n");
+
+ return -EINVAL;
+}
+static inline void stmmac_unregister_pci(void)
+{
+}
+#endif /* CONFIG_STMMAC_PCI */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3638569..51b3b68 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -42,7 +42,6 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
-#include <linux/pci.h>
#ifdef CONFIG_STMMAC_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -2094,25 +2093,29 @@ int stmmac_restore(struct net_device *ndev)
}
#endif /* CONFIG_PM */
+/* Driver can be configured w/ and w/ both PCI and Platf drivers
+ * depending on the configuration selected.
+ */
static int __init stmmac_init(void)
{
- int err = 0;
+ int err_plt = 0;
+ int err_pci = 0;
- err = platform_driver_register(&stmmac_pltfr_driver);
+ err_plt = stmmac_register_platform();
+ err_pci = stmmac_register_pci();
- if (!err) {
- err = pci_register_driver(&stmmac_pci_driver);
- if (err)
- platform_driver_unregister(&stmmac_pltfr_driver);
+ if ((err_pci) && (err_plt)) {
+ pr_err("stmmac: driver registration failed\n");
+ return -EINVAL;
}
- return err;
+ return 0;
}
static void __exit stmmac_exit(void)
{
- pci_unregister_driver(&stmmac_pci_driver);
- platform_driver_unregister(&stmmac_pltfr_driver);
+ stmmac_unregister_platform();
+ stmmac_unregister_pci();
}
module_init(stmmac_init);
OpenPOWER on IntegriCloud