tty: pr_warning->pr_warn and logging neatening

Convert the pr_warning to the more common pr_warn.

Other miscellanea:

o Convert unusual PR_FMT define and uses to pr_fmt
o Remove unnecessary OOM message
o Fix grammar in an error message
o Convert a pr_warning with a KERN_ERR to pr_err

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 30 insertions, 32 deletions

diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 4f485e8..9d29d7e 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -309,8 +309,8 @@ static int __init ehv_bc_console_init(void)
 	 * handle for udbg.
 	 */
 	if (stdout_bc != CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE)
-		pr_warning("ehv-bc: udbg handle %u is not the stdout handle\n",
-			   CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE);
+		pr_warn("ehv-bc: udbg handle %u is not the stdout handle\n",
+			CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE);
 #endif
 
 	/* add_preferred_console() must be called before register_console(),
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 858291c..59ed783 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -249,7 +249,7 @@ static int lock_card(struct isi_board *card)
 		spin_unlock_irqrestore(&card->card_lock, card->flags);
 		msleep(10);
 	}
-	pr_warning("Failed to lock Card (0x%lx)\n", card->base);
+	pr_warn("Failed to lock Card (0x%lx)\n", card->base);
 
 	return 0;	/* Failed to acquire the card! */
 }
@@ -378,13 +378,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port,
 	char *name, const char *routine)
 {
 	if (!port) {
-		pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
-			   name, routine);
+		pr_warn("Warning: bad isicom magic for dev %s in %s\n",
+			name, routine);
 		return 1;
 	}
 	if (port->magic != ISICOM_MAGIC) {
-		pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
-			   name, routine);
+		pr_warn("Warning: NULL isicom port for dev %s in %s\n",
+			name, routine);
 		return 1;
 	}
 
@@ -546,8 +546,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
 	byte_count = header & 0xff;
 
 	if (channel + 1 > card->port_count) {
-		pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
-			   __func__, base, channel+1);
+		pr_warn("%s(0x%lx): %d(channel) > port_count\n",
+			__func__, base, channel + 1);
 		outw(0x0000, base+0x04); /* enable interrupts */
 		spin_unlock(&card->card_lock);
 		return IRQ_HANDLED;
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index d62d8da..984e1c0 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -517,14 +517,15 @@ static void sport_set_termios(struct uart_port *port,
 		up->csize = 5;
 		break;
 	default:
-		pr_warning("requested word length not supported\n");
+		pr_warn("requested word length not supported\n");
+		break;
 	}
 
 	if (termios->c_cflag & CSTOPB) {
 		up->stopb = 1;
 	}
 	if (termios->c_cflag & PARENB) {
-		pr_warning("PAREN bits is not supported yet\n");
+		pr_warn("PAREN bit is not supported yet\n");
 		/* up->parib = 1; */
 	}
 
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 445799d..e1f4fda 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -1371,7 +1371,7 @@ static void hsu_global_init(void)
 	hsu->iolen = 0x1000;
 
 	if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global")))
-		pr_warning("HSU: error in request mem region\n");
+		pr_warn("HSU: error in request mem region\n");
 
 	hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen);
 	if (!hsu->reg) {
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1504a14..77239d5 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -27,6 +27,8 @@
  *    interrupt for a low speed UART device
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #ifdef CONFIG_MAGIC_SYSRQ
 #define SUPPORT_SYSRQ
 #endif
@@ -47,8 +49,6 @@
 
 #include "mrst_max3110.h"
 
-#define PR_FMT	"mrst_max3110: "
-
 #define UART_TX_NEEDED 1
 #define CON_TX_NEEDED  2
 #define BIT_IRQ_PENDING    3
@@ -127,8 +127,8 @@ static int max3110_out(struct uart_max3110 *max, const u16 out)
 	*obuf = out;
 	ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
 	if (ret) {
-		pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
-				__func__, ret, out);
+		pr_warn("%s: get err msg %d when sending 0x%x\n",
+			__func__, ret, out);
 		goto exit;
 	}
 
@@ -153,10 +153,8 @@ static int max3110_read_multi(struct uart_max3110 *max)
 
 	blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
 	buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
-	if (!buf) {
-		pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
+	if (!buf)
 		return 0;
-	}
 
 	/* tx/rx always have the same length */
 	obuf = buf;
@@ -212,13 +210,13 @@ serial_m3110_con_setup(struct console *co, char *options)
 	int parity = 'n';
 	int flow = 'n';
 
-	pr_info(PR_FMT "setting up console\n");
+	pr_info("setting up console\n");
 
 	if (co->index == -1)
 		co->index = 0;
 
 	if (!max) {
-		pr_err(PR_FMT "pmax is NULL, return");
+		pr_err("pmax is NULL, return\n");
 		return -ENODEV;
 	}
 
@@ -296,8 +294,7 @@ static void send_circ_buf(struct uart_max3110 *max,
 
 			ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
 			if (ret)
-				pr_warning(PR_FMT "%s(): get err msg %d\n",
-						__func__, ret);
+				pr_warn("%s: get err msg %d\n", __func__, ret);
 
 			receive_chars(max, ibuf, len);
 
@@ -411,7 +408,7 @@ static int max3110_main_thread(void *_max)
 	int ret = 0;
 	struct circ_buf *xmit = &max->con_xmit;
 
-	pr_info(PR_FMT "start main thread\n");
+	pr_info("start main thread\n");
 
 	do {
 		wait_event_interruptible(*wq,
@@ -455,7 +452,7 @@ static int max3110_read_thread(void *_max)
 {
 	struct uart_max3110 *max = _max;
 
-	pr_info(PR_FMT "start read thread\n");
+	pr_info("start read thread\n");
 	do {
 		/*
 		 * If can't acquire the mutex, it means the main thread
@@ -481,7 +478,7 @@ static int serial_m3110_startup(struct uart_port *port)
 	int ret = 0;
 
 	if (port->line != 0) {
-		pr_err(PR_FMT "uart port startup failed\n");
+		pr_err("uart port startup failed\n");
 		return -1;
 	}
 
@@ -504,7 +501,7 @@ static int serial_m3110_startup(struct uart_port *port)
 		if (IS_ERR(max->read_thread)) {
 			ret = PTR_ERR(max->read_thread);
 			max->read_thread = NULL;
-			pr_err(PR_FMT "Can't create read thread!\n");
+			pr_err("Can't create read thread!\n");
 			return ret;
 		}
 	}
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index c039cfe..8a89f6e 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -924,7 +924,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 
 	if (kbd->kbdmode != VC_UNICODE) {
 		if (!up_flag)
-			pr_warning("keyboard mode must be unicode for braille patterns\n");
+			pr_warn("keyboard mode must be unicode for braille patterns\n");
 		return;
 	}
 
@@ -1253,8 +1253,8 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	if (raw_mode && !hw_raw)
 		if (emulate_raw(vc, keycode, !down << 7))
 			if (keycode < BTN_MISC && printk_ratelimit())
-				pr_warning("can't emulate rawmode for keycode %d\n",
-					   keycode);
+				pr_warn("can't emulate rawmode for keycode %d\n",
+					keycode);
 
 #ifdef CONFIG_SPARC
 	if (keycode == KEY_A && sparc_l1_a_state) {
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index ed01365..f3fbbbc 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3855,8 +3855,8 @@ void do_unblank_screen(int leaving_gfx)
 		return;
 	if (!vc_cons_allocated(fg_console)) {
 		/* impossible */
-		pr_warning("unblank_screen: tty %d not allocated ??\n",
-			   fg_console+1);
+		pr_warn("unblank_screen: tty %d not allocated ??\n",
+			fg_console + 1);
 		return;
 	}
 	vc = vc_cons[fg_console].d;