[ALSA] ASoC pxa2xx AC97 support

This patch adds pxa2xx AC97 ASoC audio support. It's based on
sound/arm/pxa-ac97 by Nicolas Pitre with the following differences.
 o Modified driver structure to use ASoC core PCM callbacks.
 o Removed AC97 configuration function (all handled in ASoC core)
 o Added and exported ASoC DAI configuration table.
 o Added DMA support for AUX DAC and Mic ADC
 o Separated out AC97 reset into cold and warm reset functions.
From: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

1 files changed, 437 insertions, 0 deletions

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
new file mode 100644
index 0000000..28b1985
--- /dev/null
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -0,0 +1,437 @@
+/*
+ * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/irq.h>
+#include <linux/mutex.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/audio.h>
+
+#include "pxa2xx-pcm.h"
+
+static DEFINE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+
+#define AC97_DIR \
+	(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
+
+#define AC97_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
+
+/* may need to expand this */
+static struct snd_soc_dai_mode pxa2xx_ac97_modes[] = {
+	{
+		.pcmfmt = SNDRV_PCM_FMTBIT_S16_LE,
+		.pcmrate = AC97_RATES,
+		.pcmdir = AC97_DIR,
+	},
+};
+
+/*
+ * Beware PXA27x bugs:
+ *
+ *   o Slot 12 read from modem space will hang controller.
+ *   o CDONE, SDONE interrupt fails after any slot 12 IO.
+ *
+ * We therefore have an hybrid approach for waiting on SDONE (interrupt or
+ * 1 jiffy timeout if interrupt never comes).
+ */
+
+static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
+	unsigned short reg)
+{
+	unsigned short val = -1;
+	volatile u32 *reg_addr;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec/modem space */
+#ifdef CONFIG_PXA27x
+	reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#else
+	if (reg == AC97_GPIO_STATUS)
+		reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+	else
+		reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#endif
+	reg_addr += (reg >> 1);
+
+#ifndef CONFIG_PXA27x
+	if (reg == AC97_GPIO_STATUS) {
+		/* read from controller cache */
+		val = *reg_addr;
+		goto out;
+	}
+#endif
+
+	/* start read access across the ac97 link */
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	val = *reg_addr;
+
+	wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
+	if (!((GSR | gsr_bits) & GSR_SDONE)) {
+		printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
+				__FUNCTION__, reg, GSR | gsr_bits);
+		val = -1;
+		goto out;
+	}
+
+	/* valid data now */
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	val = *reg_addr;
+	/* but we've just started another cycle... */
+	wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
+
+out:	mutex_unlock(&car_mutex);
+	return val;
+}
+
+static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+	unsigned short val)
+{
+	volatile u32 *reg_addr;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec/modem space */
+#ifdef CONFIG_PXA27x
+	reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#else
+	if (reg == AC97_GPIO_STATUS)
+		reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+	else
+		reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+#endif
+	reg_addr += (reg >> 1);
+
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	*reg_addr = val;
+	wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
+	if (!((GSR | gsr_bits) & GSR_CDONE))
+		printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
+				__FUNCTION__, reg, GSR | gsr_bits);
+
+	mutex_unlock(&car_mutex);
+}
+
+static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	gsr_bits = 0;
+
+#ifdef CONFIG_PXA27x
+	/* warm reset broken on Bulverde,
+	   so manually keep AC97 reset high */
+	pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
+	udelay(10);
+	GCR |= GCR_WARM_RST;
+	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+	udelay(500);
+#else
+	GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
+	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif
+
+	if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
+		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+				 __FUNCTION__, gsr_bits);
+
+	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+
+static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
+	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
+
+	gsr_bits = 0;
+#ifdef CONFIG_PXA27x
+	/* PXA27x Developers Manual section 13.5.2.2.1 */
+	pxa_set_cken(1 << 31, 1);
+	udelay(5);
+	pxa_set_cken(1 << 31, 0);
+	GCR = GCR_COLD_RST;
+	udelay(50);
+#else
+	GCR = GCR_COLD_RST;
+	GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
+	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif
+
+	if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
+		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+				 __FUNCTION__, gsr_bits);
+
+	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
+{
+	long status;
+
+	status = GSR;
+	if (status) {
+		GSR = status;
+		gsr_bits |= status;
+		wake_up(&gsr_wq);
+
+#ifdef CONFIG_PXA27x
+		/* Although we don't use those we still need to clear them
+		   since they tend to spuriously trigger when MMC is used
+		   (hardware bug? go figure)... */
+		MISR = MISR_EOC;
+		PISR = PISR_EOC;
+		MCSR = MCSR_EOC;
+#endif
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read	= pxa2xx_ac97_read,
+	.write	= pxa2xx_ac97_write,
+	.warm_reset	= pxa2xx_ac97_warm_reset,
+	.reset	= pxa2xx_ac97_cold_reset,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
+	.name			= "AC97 PCM Stereo out",
+	.dev_addr		= __PREG(PCDR),
+	.drcmr			= &DRCMRTXPCDR,
+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
+				  DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
+	.name			= "AC97 PCM Stereo in",
+	.dev_addr		= __PREG(PCDR),
+	.drcmr			= &DRCMRRXPCDR,
+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
+				  DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
+	.name			= "AC97 Aux PCM (Slot 5) Mono out",
+	.dev_addr		= __PREG(MODR),
+	.drcmr			= &DRCMRTXMODR,
+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
+				  DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
+	.name			= "AC97 Aux PCM (Slot 5) Mono in",
+	.dev_addr		= __PREG(MODR),
+	.drcmr			= &DRCMRRXMODR,
+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
+				  DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
+	.name			= "AC97 Mic PCM (Slot 6) Mono in",
+	.dev_addr		= __PREG(MCDR),
+	.drcmr			= &DRCMRRXMCDR,
+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
+				  DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+#ifdef CONFIG_PM
+static int pxa2xx_ac97_suspend(struct platform_device *pdev,
+	struct snd_soc_cpu_dai *dai)
+{
+	GCR |= GCR_ACLINK_OFF;
+	pxa_set_cken(CKEN2_AC97, 0);
+	return 0;
+}
+
+static int pxa2xx_ac97_resume(struct platform_device *pdev,
+	struct snd_soc_cpu_dai *dai)
+{
+	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+	pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+#ifdef CONFIG_PXA27x
+	/* Use GPIO 113 as AC97 Reset on Bulverde */
+	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+#endif
+	pxa_set_cken(CKEN2_AC97, 1);
+	return 0;
+}
+
+#else
+#define pxa2xx_ac97_suspend	NULL
+#define pxa2xx_ac97_resume	NULL
+#endif
+
+static int pxa2xx_ac97_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
+	if (ret < 0)
+		goto err;
+
+	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+	pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+#ifdef CONFIG_PXA27x
+	/* Use GPIO 113 as AC97 Reset on Bulverde */
+	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+#endif
+	pxa_set_cken(CKEN2_AC97, 1);
+	return 0;
+
+ err:
+	if (CKEN & CKEN2_AC97) {
+		GCR |= GCR_ACLINK_OFF;
+		free_irq(IRQ_AC97, NULL);
+		pxa_set_cken(CKEN2_AC97, 0);
+	}
+	return ret;
+}
+
+static void pxa2xx_ac97_remove(struct platform_device *pdev)
+{
+	GCR |= GCR_ACLINK_OFF;
+	free_irq(IRQ_AC97, NULL);
+	pxa_set_cken(CKEN2_AC97, 0);
+}
+
+static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
+	else
+		rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
+
+	return 0;
+}
+
+static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
+	else
+		rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
+
+	return 0;
+}
+
+static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return -ENODEV;
+	else
+		rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
+
+	return 0;
+}
+
+/*
+ * There is only 1 physical AC97 interface for pxa2xx, but it
+ * has extra fifo's that can be used for aux DACs and ADCs.
+ */
+struct snd_soc_cpu_dai pxa_ac97_dai[] = {
+{
+	.name = "pxa2xx-ac97",
+	.id = 0,
+	.type = SND_SOC_DAI_AC97,
+	.probe = pxa2xx_ac97_probe,
+	.remove = pxa2xx_ac97_remove,
+	.suspend = pxa2xx_ac97_suspend,
+	.resume = pxa2xx_ac97_resume,
+	.playback = {
+		.stream_name = "AC97 Playback",
+		.channels_min = 2,
+		.channels_max = 2,},
+	.capture = {
+		.stream_name = "AC97 Capture",
+		.channels_min = 2,
+		.channels_max = 2,},
+	.ops = {
+		.hw_params = pxa2xx_ac97_hw_params,},
+	.caps = {
+		.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
+		.mode = pxa2xx_ac97_modes,},
+},
+{
+	.name = "pxa2xx-ac97-aux",
+	.id = 1,
+	.type = SND_SOC_DAI_AC97,
+	.playback = {
+		.stream_name = "AC97 Aux Playback",
+		.channels_min = 1,
+		.channels_max = 1,},
+	.capture = {
+		.stream_name = "AC97 Aux Capture",
+		.channels_min = 1,
+		.channels_max = 1,},
+	.ops = {
+		.hw_params = pxa2xx_ac97_hw_aux_params,},
+	.caps = {
+		.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
+		.mode = pxa2xx_ac97_modes,},
+},
+{
+	.name = "pxa2xx-ac97-mic",
+	.id = 2,
+	.type = SND_SOC_DAI_AC97,
+	.capture = {
+		.stream_name = "AC97 Mic Capture",
+		.channels_min = 1,
+		.channels_max = 1,},
+	.ops = {
+		.hw_params = pxa2xx_ac97_hw_mic_params,},
+	.caps = {
+		.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
+		.mode = pxa2xx_ac97_modes,},},
+};
+
+EXPORT_SYMBOL_GPL(pxa_ac97_dai);
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
+MODULE_LICENSE("GPL");