Merge branch 'cpu-bindings' into for-next

2 files changed, 828 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index f32494d..9130435 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -1,77 +1,384 @@
-* ARM CPUs binding description
+=================
+ARM CPUs bindings
+=================
 
 The device tree allows to describe the layout of CPUs in a system through
 the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
 defining properties for every cpu.
 
-Bindings for CPU nodes follow the ePAPR standard, available from:
-
-http://devicetree.org
-
-For the ARM architecture every CPU node must contain the following properties:
-
-- device_type:	must be "cpu"
-- reg:		property matching the CPU MPIDR[23:0] register bits
-		reg[31:24] bits must be set to 0
-- compatible:	should be one of:
-		"arm,arm1020"
-		"arm,arm1020e"
-		"arm,arm1022"
-		"arm,arm1026"
-		"arm,arm720"
-		"arm,arm740"
-		"arm,arm7tdmi"
-		"arm,arm920"
-		"arm,arm922"
-		"arm,arm925"
-		"arm,arm926"
-		"arm,arm940"
-		"arm,arm946"
-		"arm,arm9tdmi"
-		"arm,cortex-a5"
-		"arm,cortex-a7"
-		"arm,cortex-a8"
-		"arm,cortex-a9"
-		"arm,cortex-a15"
-		"arm,arm1136"
-		"arm,arm1156"
-		"arm,arm1176"
-		"arm,arm11mpcore"
-		"faraday,fa526"
-		"intel,sa110"
-		"intel,sa1100"
-		"marvell,feroceon"
-		"marvell,mohawk"
-		"marvell,xsc3"
-		"marvell,xscale"
-
-Example:
+Bindings for CPU nodes follow the ePAPR v1.1 standard, available from:
+
+https://www.power.org/documentation/epapr-version-1-1/
+
+with updates for 32-bit and 64-bit ARM systems provided in this document.
+
+================================
+Convention used in this document
+================================
+
+This document follows the conventions described in the ePAPR v1.1, with
+the addition:
+
+- square brackets define bitfields, eg reg[7:0] value of the bitfield in
+  the reg property contained in bits 7 down to 0
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu
+nodes to be present and contain the properties described below.
+
+- cpus node
+
+	Description: Container of cpu nodes
+
+	The node name must be "cpus".
+
+	A cpus node must define the following properties:
+
+	- #address-cells
+		Usage: required
+		Value type: <u32>
+
+		Definition depends on ARM architecture version and
+		configuration:
+
+			# On uniprocessor ARM architectures previous to v7
+			  value must be 1, to enable a simple enumeration
+			  scheme for processors that do not have a HW CPU
+			  identification register.
+			# On 32-bit ARM 11 MPcore, ARM v7 or later systems
+			  value must be 1, that corresponds to CPUID/MPIDR
+			  registers sizes.
+			# On ARM v8 64-bit systems value should be set to 2,
+			  that corresponds to the MPIDR_EL1 register size.
+			  If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
+			  in the system, #address-cells can be set to 1, since
+			  MPIDR_EL1[63:32] bits are not used for CPUs
+			  identification.
+	- #size-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 0
+
+- cpu node
+
+	Description: Describes a CPU in an ARM based system
+
+	PROPERTIES
+
+	- device_type
+		Usage: required
+		Value type: <string>
+		Definition: must be "cpu"
+	- reg
+		Usage and definition depend on ARM architecture version and
+		configuration:
+
+			# On uniprocessor ARM architectures previous to v7
+			  this property is required and must be set to 0.
+
+			# On ARM 11 MPcore based systems this property is
+			  required and matches the CPUID[11:0] register bits.
+
+			  Bits [11:0] in the reg cell must be set to
+			  bits [11:0] in CPU ID register.
+
+			  All other bits in the reg cell must be set to 0.
+
+			# On 32-bit ARM v7 or later systems this property is
+			  required and matches the CPU MPIDR[23:0] register
+			  bits.
+
+			  Bits [23:0] in the reg cell must be set to
+			  bits [23:0] in MPIDR.
+
+			  All other bits in the reg cell must be set to 0.
+
+			# On ARM v8 64-bit systems this property is required
+			  and matches the MPIDR_EL1 register affinity bits.
+
+			  * If cpus node's #address-cells property is set to 2
+
+			    The first reg cell bits [7:0] must be set to
+			    bits [39:32] of MPIDR_EL1.
+
+			    The second reg cell bits [23:0] must be set to
+			    bits [23:0] of MPIDR_EL1.
+
+			  * If cpus node's #address-cells property is set to 1
+
+			    The reg cell bits [23:0] must be set to bits [23:0]
+			    of MPIDR_EL1.
+
+			  All other bits in the reg cells must be set to 0.
+
+	- compatible:
+		Usage: required
+		Value type: <string>
+		Definition: should be one of:
+			    "arm,arm710t"
+			    "arm,arm720t"
+			    "arm,arm740t"
+			    "arm,arm7ej-s"
+			    "arm,arm7tdmi"
+			    "arm,arm7tdmi-s"
+			    "arm,arm9es"
+			    "arm,arm9ej-s"
+			    "arm,arm920t"
+			    "arm,arm922t"
+			    "arm,arm925"
+			    "arm,arm926e-s"
+			    "arm,arm926ej-s"
+			    "arm,arm940t"
+			    "arm,arm946e-s"
+			    "arm,arm966e-s"
+			    "arm,arm968e-s"
+			    "arm,arm9tdmi"
+			    "arm,arm1020e"
+			    "arm,arm1020t"
+			    "arm,arm1022e"
+			    "arm,arm1026ej-s"
+			    "arm,arm1136j-s"
+			    "arm,arm1136jf-s"
+			    "arm,arm1156t2-s"
+			    "arm,arm1156t2f-s"
+			    "arm,arm1176jzf"
+			    "arm,arm1176jz-s"
+			    "arm,arm1176jzf-s"
+			    "arm,arm11mpcore"
+			    "arm,cortex-a5"
+			    "arm,cortex-a7"
+			    "arm,cortex-a8"
+			    "arm,cortex-a9"
+			    "arm,cortex-a15"
+			    "arm,cortex-a53"
+			    "arm,cortex-a57"
+			    "arm,cortex-m0"
+			    "arm,cortex-m0+"
+			    "arm,cortex-m1"
+			    "arm,cortex-m3"
+			    "arm,cortex-m4"
+			    "arm,cortex-r4"
+			    "arm,cortex-r5"
+			    "arm,cortex-r7"
+			    "faraday,fa526"
+			    "intel,sa110"
+			    "intel,sa1100"
+			    "marvell,feroceon"
+			    "marvell,mohawk"
+			    "marvell,pj4a"
+			    "marvell,pj4b"
+			    "marvell,sheeva-v5"
+			    "qcom,krait"
+			    "qcom,scorpion"
+	- enable-method
+		Value type: <stringlist>
+		Usage and definition depend on ARM architecture version.
+			# On ARM v8 64-bit this property is required and must
+			  be one of:
+			     "spin-table"
+			     "psci"
+			# On ARM 32-bit systems this property is optional.
+
+	- cpu-release-addr
+		Usage: required for systems that have an "enable-method"
+		       property value of "spin-table".
+		Value type: <prop-encoded-array>
+		Definition:
+			# On ARM v8 64-bit systems must be a two cell
+			  property identifying a 64-bit zero-initialised
+			  memory location.
+
+Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {
 		#size-cells = <0>;
 		#address-cells = <1>;
 
-		CPU0: cpu@0 {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 		};
 
-		CPU1: cpu@1 {
+		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 		};
 
-		CPU2: cpu@100 {
+		cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 		};
 
-		CPU3: cpu@101 {
+		cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 		};
 	};
+
+Example 2 (Cortex-A8 uniprocessor 32-bit system):
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+Example 4 (ARM Cortex-A57 64-bit system):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt
new file mode 100644
index 0000000..4aa20e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/topology.txt
@@ -0,0 +1,474 @@
+===========================================
+ARM topology binding description
+===========================================
+
+===========================================
+1 - Introduction
+===========================================
+
+In an ARM system, the hierarchy of CPUs is defined through three entities that
+are used to describe the layout of physical CPUs in the system:
+
+- cluster
+- core
+- thread
+
+The cpu nodes (bindings defined in [1]) represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
+
+The bottom hierarchy level sits at core or thread level depending on whether
+symmetric multi-threading (SMT) is supported or not.
+
+For instance in a system where CPUs support SMT, "cpu" nodes represent all
+threads existing in the system and map to the hierarchy level "thread" above.
+In systems where SMT is not supported "cpu" nodes represent all cores present
+in the system and map to the hierarchy level "core" above.
+
+ARM topology bindings allow one to associate cpu nodes with hierarchical groups
+corresponding to the system hierarchy; syntactically they are defined as device
+tree nodes.
+
+The remainder of this document provides the topology bindings for ARM, based
+on the ePAPR standard, available from:
+
+http://www.power.org/documentation/epapr-version-1-1/
+
+If not stated otherwise, whenever a reference to a cpu node phandle is made its
+value must point to a cpu node compliant with the cpu node bindings as
+documented in [1].
+A topology description containing phandles to cpu nodes that are not compliant
+with bindings standardized in [1] is therefore considered invalid.
+
+===========================================
+2 - cpu-map node
+===========================================
+
+The ARM CPU topology is defined within the cpu-map node, which is a direct
+child of the cpus node and provides a container where the actual topology
+nodes are listed.
+
+- cpu-map node
+
+	Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
+			  ARM uniprocessor systems do not require a topology
+			  description and therefore should not define a
+			  cpu-map node.
+
+	Description: The cpu-map node is just a container node where its
+		     subnodes describe the CPU topology.
+
+	Node name must be "cpu-map".
+
+	The cpu-map node's parent node must be the cpus node.
+
+	The cpu-map node's child nodes can be:
+
+	- one or more cluster nodes
+
+	Any other configuration is considered invalid.
+
+The cpu-map node can only contain three types of child nodes:
+
+- cluster node
+- core node
+- thread node
+
+whose bindings are described in paragraph 3.
+
+The nodes describing the CPU topology (cluster/core/thread) can only be
+defined within the cpu-map node.
+Any other configuration is consider invalid and therefore must be ignored.
+
+===========================================
+2.1 - cpu-map child nodes naming convention
+===========================================
+
+cpu-map child nodes must follow a naming convention where the node name
+must be "clusterN", "coreN", "threadN" depending on the node type (ie
+cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
+are siblings within a single common parent node must be given a unique and
+sequential N value, starting from 0).
+cpu-map child nodes which do not share a common parent node can have the same
+name (ie same number N as other cpu-map child nodes at different device tree
+levels) since name uniqueness will be guaranteed by the device tree hierarchy.
+
+===========================================
+3 - cluster/core/thread node bindings
+===========================================
+
+Bindings for cluster/cpu/thread nodes are defined as follows:
+
+- cluster node
+
+	 Description: must be declared within a cpu-map node, one node
+		      per cluster. A system can contain several layers of
+		      clustering and cluster nodes can be contained in parent
+		      cluster nodes.
+
+	The cluster node name must be "clusterN" as described in 2.1 above.
+	A cluster node can not be a leaf node.
+
+	A cluster node's child nodes must be:
+
+	- one or more cluster nodes; or
+	- one or more core nodes
+
+	Any other configuration is considered invalid.
+
+- core node
+
+	Description: must be declared in a cluster node, one node per core in
+		     the cluster. If the system does not support SMT, core
+		     nodes are leaf nodes, otherwise they become containers of
+		     thread nodes.
+
+	The core node name must be "coreN" as described in 2.1 above.
+
+	A core node must be a leaf node if SMT is not supported.
+
+	Properties for core nodes that are leaf nodes:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to the
+			    core node.
+
+	If a core node is not a leaf node (CPUs supporting SMT) a core node's
+	child nodes can be:
+
+	- one or more thread nodes
+
+	Any other configuration is considered invalid.
+
+- thread node
+
+	Description: must be declared in a core node, one node per thread
+		     in the core if the system supports SMT. Thread nodes are
+		     always leaf nodes in the device tree.
+
+	The thread node name must be "threadN" as described in 2.1 above.
+
+	A thread node must be a leaf node.
+
+	A thread node must contain the following property:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to
+			    the thread node.
+
+===========================================
+4 - Example dts
+===========================================
+
+Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	cpu-map {
+		cluster0 {
+			cluster0 {
+				core0 {
+					thread0 {
+						cpu = <&CPU0>;
+					};
+					thread1 {
+						cpu = <&CPU1>;
+					};
+				};
+
+				core1 {
+					thread0 {
+						cpu = <&CPU2>;
+					};
+					thread1 {
+						cpu = <&CPU3>;
+					};
+				};
+			};
+
+			cluster1 {
+				core0 {
+					thread0 {
+						cpu = <&CPU4>;
+					};
+					thread1 {
+						cpu = <&CPU5>;
+					};
+				};
+
+				core1 {
+					thread0 {
+						cpu = <&CPU6>;
+					};
+					thread1 {
+						cpu = <&CPU7>;
+					};
+				};
+			};
+		};
+
+		cluster1 {
+			cluster0 {
+				core0 {
+					thread0 {
+						cpu = <&CPU8>;
+					};
+					thread1 {
+						cpu = <&CPU9>;
+					};
+				};
+				core1 {
+					thread0 {
+						cpu = <&CPU10>;
+					};
+					thread1 {
+						cpu = <&CPU11>;
+					};
+				};
+			};
+
+			cluster1 {
+				core0 {
+					thread0 {
+						cpu = <&CPU12>;
+					};
+					thread1 {
+						cpu = <&CPU13>;
+					};
+				};
+				core1 {
+					thread0 {
+						cpu = <&CPU14>;
+					};
+					thread1 {
+						cpu = <&CPU15>;
+					};
+				};
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU4: cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU5: cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU6: cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU7: cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU8: cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU9: cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU10: cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU11: cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU12: cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU13: cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU14: cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU15: cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+};
+
+Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <1>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+			core1 {
+				cpu = <&CPU1>;
+			};
+			core2 {
+				cpu = <&CPU2>;
+			};
+			core3 {
+				cpu = <&CPU3>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&CPU4>;
+			};
+			core1 {
+				cpu = <&CPU5>;
+			};
+			core2 {
+				cpu = <&CPU6>;
+			};
+			core3 {
+				cpu = <&CPU7>;
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x0>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x1>;
+	};
+
+	CPU2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x2>;
+	};
+
+	CPU3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x3>;
+	};
+
+	CPU4: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x100>;
+	};
+
+	CPU5: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x101>;
+	};
+
+	CPU6: cpu@102 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x102>;
+	};
+
+	CPU7: cpu@103 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x103>;
+	};
+};
+
+===============================================================================
+[1] ARM Linux kernel documentation
+    Documentation/devicetree/bindings/arm/cpus.txt