Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
   TI's TPS65090 and TPS65217.
 - New variants support (8420, 8520 ab9540), cleanups and bug fixes for
   the abx500 and db8500 ST-E chipsets.
 - Some minor fixes and update for the wm8994 from Mark.
 - The beginning of a long term TWL cleanup effort coming from the TI
   folks.
 - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
   drivers.

Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).

* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
  gpio/twl: Add DT support to gpio-twl4030 driver
  gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
  mfd: Detach twl6040 from the pmic mfd driver
  mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
  mfd: Micro-optimization on twl4030 IRQ handler
  mfd: Make twl4030 SIH SPARSE_IRQ capable
  mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
  mfd: Remove references already defineid in header file from twl-core
  mfd: Remove unneeded header from twl-core
  mfd: Make twl-core not depend on pdata->irq_base/end
  ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
  mfd: Return twl6030_mmc_card_detect IRQ for board setup
  Revert "mfd: Add platform data for MAX8997 haptic driver"
  mfd: Add support for TPS65090
  mfd: Add some da9052-i2c section annotations
  mfd: Build rtc5t583 only if I2C config is selected to y.
  mfd: Add anatop mfd driver
  mfd: Fix compilation error in tps65910.h
  mfd: Add 8420 variant to db8500-prcmu
  mfd: Add 8520 PRCMU variant to db8500-prcmu
  ...

69 files changed, 5211 insertions, 1126 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
new file mode 100644
index 0000000..16695d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -0,0 +1,23 @@
+twl4030 GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,twl4030-gpio" for twl4030 GPIO controller
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+  The first cell is the GPIO number.
+  The second cell is not used.
+
+Example:
+
+twl_gpio: gpio {
+    compatible = "ti,twl4030-gpio";
+    #gpio-cells = <2>;
+    gpio-controller;
+    #interrupt-cells = <2>;
+    interrupt-controller;
+};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 30768c2..37dcb1b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -490,21 +490,22 @@ static struct platform_device omap_vwlan_device = {
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
-	int ret = 0;
+	int irq = 0;
 	struct platform_device *pdev = container_of(dev,
 				struct platform_device, dev);
 	struct omap_mmc_platform_data *pdata = dev->platform_data;
 
 	/* Setting MMC1 Card detect Irq */
 	if (pdev->id == 0) {
-		ret = twl6030_mmc_card_detect_config();
-		if (ret)
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
 			pr_err("Failed configuring MMC1 card detect\n");
-		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
-						MMCDETECT_INTR_OFFSET;
+			return irq;
+		}
+		pdata->slots[0].card_detect_irq = irq;
 		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 	}
-	return ret;
+	return 0;
 }
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e9071a5..8bf8e99 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -238,7 +238,7 @@ struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
-	int ret = 0;
+	int irq = 0;
 	struct platform_device *pdev = container_of(dev,
 				struct platform_device, dev);
 	struct omap_mmc_platform_data *pdata = dev->platform_data;
@@ -249,14 +249,15 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 	}
 	/* Setting MMC1 Card detect Irq */
 	if (pdev->id == 0) {
-		ret = twl6030_mmc_card_detect_config();
-		 if (ret)
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
 			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, ret);
-		 else
-			pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+				__func__, irq);
+			return irq;
+		}
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 	}
-	return ret;
+	return 0;
 }
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index b6a6772..0ace108 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -17,6 +17,8 @@
 #include <linux/mfd/wm831x/gpio.h>
 #include <linux/mfd/wm8994/pdata.h>
 
+#include <linux/regulator/machine.h>
+
 #include <sound/wm5100.h>
 #include <sound/wm8996.h>
 #include <sound/wm8962.h>
@@ -153,6 +155,14 @@ static const struct i2c_board_info wm1259_devs[] = {
 	},
 };
 
+static struct regulator_init_data wm8994_ldo1 = {
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data wm8994_ldo2 = {
+	.supply_regulator = "WALLVDD",
+};
+
 static struct wm8994_pdata wm8994_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.gpio_defaults = {
@@ -160,8 +170,8 @@ static struct wm8994_pdata wm8994_pdata = {
 	},
 	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
-		{ .supply = "WALLVDD" },
-		{ .supply = "WALLVDD" },
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
 	},
 };
 
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index d2d4131..7d34c52 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -13,7 +13,7 @@
 
 #define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
 #define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
-					 + AB8500_NR_IRQS)
+					 + AB8500_MAX_NR_IRQS)
 
 /* TC35892 */
 #define TC35892_NR_INTERNAL_IRQS	8
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index f500201..a22ffa5 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = {
 	},
 	[1] = {
 		.index = 1,
-		.frequency = 300000,
+		.frequency = 400000,
 	},
 	[2] = {
 		.index = 2,
-		.frequency = 600000,
+		.frequency = 800000,
 	},
 	[3] = {
 		/* Used for MAX_OPP, if available */
@@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 
 	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
 
-	if (!prcmu_is_u8400()) {
-		freq_table[1].frequency = 400000;
-		freq_table[2].frequency = 800000;
-		if (prcmu_has_arm_maxopp())
-			freq_table[3].frequency = 1000000;
-	}
+	if (prcmu_has_arm_maxopp())
+		freq_table[3].frequency = 1000000;
+
 	pr_info("db8500-cpufreq : Available frequencies:\n");
 	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
 		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 87a68a8..094c5c4 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -307,13 +307,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	struct stmpe_gpio_platform_data *pdata;
 	struct stmpe_gpio *stmpe_gpio;
 	int ret;
-	int irq;
+	int irq = 0;
 
 	pdata = stmpe->pdata->gpio;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
 
 	stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
 	if (!stmpe_gpio)
@@ -330,21 +328,28 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	stmpe_gpio->chip.dev = &pdev->dev;
 	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
 
-	stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	if (irq >= 0)
+		stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
+	else
+		dev_info(&pdev->dev,
+			"device configured in no-irq mode; "
+			"irqs are not available\n");
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 	if (ret)
 		goto out_free;
 
-	ret = stmpe_gpio_irq_init(stmpe_gpio);
-	if (ret)
-		goto out_disable;
+	if (irq >= 0) {
+		ret = stmpe_gpio_irq_init(stmpe_gpio);
+		if (ret)
+			goto out_disable;
 
-	ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT,
-				   "stmpe-gpio", stmpe_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-		goto out_removeirq;
+		ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq,
+				IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+			goto out_removeirq;
+		}
 	}
 
 	ret = gpiochip_add(&stmpe_gpio->chip);
@@ -361,9 +366,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
 	return 0;
 
 out_freeirq:
-	free_irq(irq, stmpe_gpio);
+	if (irq >= 0)
+		free_irq(irq, stmpe_gpio);
 out_removeirq:
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0)
+		stmpe_gpio_irq_remove(stmpe_gpio);
 out_disable:
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 out_free:
@@ -391,8 +398,10 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
 
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 
-	free_irq(irq, stmpe_gpio);
-	stmpe_gpio_irq_remove(stmpe_gpio);
+	if (irq >= 0) {
+		free_irq(irq, stmpe_gpio);
+		stmpe_gpio_irq_remove(stmpe_gpio);
+	}
 	platform_set_drvdata(pdev, NULL);
 	kfree(stmpe_gpio);
 
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index b8b4f22..94256fe 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -32,6 +32,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
 
 #include <linux/i2c/twl.h>
 
@@ -256,7 +258,8 @@ static int twl_request(struct gpio_chip *chip, unsigned offset)
 		 * and vMMC2 power supplies based on card presence.
 		 */
 		pdata = chip->dev->platform_data;
-		value |= pdata->mmc_cd & 0x03;
+		if (pdata)
+			value |= pdata->mmc_cd & 0x03;
 
 		status = gpio_twl4030_write(REG_GPIO_CTRL, value);
 	}
@@ -395,59 +398,70 @@ static int gpio_twl4030_remove(struct platform_device *pdev);
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
 {
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
-	int ret;
+	struct device_node *node = pdev->dev.of_node;
+	int ret, irq_base;
 
 	/* maybe setup IRQs */
-	if (pdata->irq_base) {
-		if (is_module()) {
-			dev_err(&pdev->dev,
-				"can't dispatch IRQs from modules\n");
-			goto no_irqs;
-		}
-		ret = twl4030_sih_setup(TWL4030_MODULE_GPIO);
-		if (ret < 0)
-			return ret;
-		WARN_ON(ret != pdata->irq_base);
-		twl4030_gpio_irq_base = ret;
+	if (is_module()) {
+		dev_err(&pdev->dev, "can't dispatch IRQs from modules\n");
+		goto no_irqs;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, TWL4030_GPIO_MAX, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to alloc irq_descs\n");
+		return irq_base;
 	}
 
+	irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
+
+	ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base);
+	if (ret < 0)
+		return ret;
+
+	twl4030_gpio_irq_base = irq_base;
+
 no_irqs:
-	/*
-	 * NOTE:  boards may waste power if they don't set pullups
-	 * and pulldowns correctly ... default for non-ULPI pins is
-	 * pulldown, and some other pins may have external pullups
-	 * or pulldowns.  Careful!
-	 */
-	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-	if (ret)
-		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-				pdata->pullups, pdata->pulldowns,
-				ret);
-
-	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-	if (ret)
-		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-				pdata->debounce, pdata->mmc_cd,
-				ret);
-
-	twl_gpiochip.base = pdata->gpio_base;
+	twl_gpiochip.base = -1;
 	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
 	twl_gpiochip.dev = &pdev->dev;
 
-	/* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-	 * is (still) clear if use_leds is set.
-	 */
-	if (pdata->use_leds)
-		twl_gpiochip.ngpio += 2;
+	if (pdata) {
+		twl_gpiochip.base = pdata->gpio_base;
+
+		/*
+		 * NOTE:  boards may waste power if they don't set pullups
+		 * and pulldowns correctly ... default for non-ULPI pins is
+		 * pulldown, and some other pins may have external pullups
+		 * or pulldowns.  Careful!
+		 */
+		ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+		if (ret)
+			dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+					pdata->pullups, pdata->pulldowns,
+					ret);
+
+		ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+		if (ret)
+			dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+					pdata->debounce, pdata->mmc_cd,
+					ret);
+
+		/*
+		 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+		 * is (still) clear if use_leds is set.
+		 */
+		if (pdata->use_leds)
+			twl_gpiochip.ngpio += 2;
+	}
 
 	ret = gpiochip_add(&twl_gpiochip);
 	if (ret < 0) {
-		dev_err(&pdev->dev,
-				"could not register gpiochip, %d\n",
-				ret);
+		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata->setup) {
+	} else if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
@@ -465,7 +479,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
 	int status;
 
-	if (pdata->teardown) {
+	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
 				pdata->gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
@@ -486,12 +500,21 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 	return -EIO;
 }
 
+static const struct of_device_id twl_gpio_match[] = {
+	{ .compatible = "ti,twl4030-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_gpio_match);
+
 /* Note:  this hardware lives inside an I2C-based multi-function device. */
 MODULE_ALIAS("platform:twl4030_gpio");
 
 static struct platform_driver gpio_twl4030_driver = {
-	.driver.name	= "twl4030_gpio",
-	.driver.owner	= THIS_MODULE,
+	.driver = {
+		.name	= "twl4030_gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl_gpio_match),
+	},
 	.probe		= gpio_twl4030_probe,
 	.remove		= gpio_twl4030_remove,
 };
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index 6c6b240..ce86c5e 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -59,7 +59,7 @@ static int mc13783_adc_read(struct device *dev,
 
 	ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
 			MC13XXX_ADC_MODE_MULT_CHAN,
-			channel, sample);
+			channel, 0, 0, sample);
 	if (ret)
 		return ret;
 
diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c
index f2e0cbc..f9ce183 100644
--- a/drivers/input/misc/88pm860x_onkey.c
+++ b/drivers/input/misc/88pm860x_onkey.c
@@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, info);
+	device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 
 out_irq:
@@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_onkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY;
+	return 0;
+}
+static int pm860x_onkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume);
+
 static struct platform_driver pm860x_onkey_driver = {
 	.driver		= {
 		.name	= "88pm860x-onkey",
 		.owner	= THIS_MODULE,
+		.pm	= &pm860x_onkey_pm_ops,
 	},
 	.probe		= pm860x_onkey_probe,
 	.remove		= __devexit_p(pm860x_onkey_remove),
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index ede0274..48dc5b0 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -39,6 +39,7 @@ struct mc13783_ts_priv {
 	struct delayed_work work;
 	struct workqueue_struct *workq;
 	unsigned int sample[4];
+	struct mc13xxx_ts_platform_data *touch;
 };
 
 static irqreturn_t mc13783_ts_handler(int irq, void *data)
@@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work)
 	unsigned int channel = 12;
 
 	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
-				mode, channel, priv->sample) == 0)
+				mode, channel,
+				priv->touch->ato, priv->touch->atox,
+				priv->sample) == 0)
 		mc13783_ts_report_sample(priv);
 }
 
@@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
 	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 	priv->idev = idev;
+	priv->touch = dev_get_platdata(&pdev->dev);
+	if (!priv->touch) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
 
 	/*
 	 * We need separate workqueue because mc13783_adc_do_conversion
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 4ca0062..5b61aaf 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -114,6 +114,27 @@ static inline int __blink_ctl_mask(int port)
 	return ret;
 }
 
+static int led_power_set(struct pm860x_chip *chip, int port, int on)
+{
+	int ret = -EINVAL;
+
+	switch (port) {
+	case PM8606_LED1_RED:
+	case PM8606_LED1_GREEN:
+	case PM8606_LED1_BLUE:
+		ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) :
+			pm8606_osc_disable(chip, RGB1_ENABLE);
+		break;
+	case PM8606_LED2_RED:
+	case PM8606_LED2_GREEN:
+	case PM8606_LED2_BLUE:
+		ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) :
+			pm8606_osc_disable(chip, RGB2_ENABLE);
+		break;
+	}
+	return ret;
+}
+
 static void pm860x_led_work(struct work_struct *work)
 {
 
@@ -126,6 +147,7 @@ static void pm860x_led_work(struct work_struct *work)
 	chip = led->chip;
 	mutex_lock(&led->lock);
 	if ((led->current_brightness == 0) && led->brightness) {
+		led_power_set(chip, led->port, 1);
 		if (led->iset) {
 			pm860x_set_bits(led->i2c, __led_off(led->port),
 					LED_CURRENT_MASK, led->iset);
@@ -149,6 +171,7 @@ static void pm860x_led_work(struct work_struct *work)
 					LED_CURRENT_MASK, 0);
 			mask = __blink_ctl_mask(led->port);
 			pm860x_set_bits(led->i2c, PM8606_WLED3B, mask, 0);
+			led_power_set(chip, led->port, 0);
 		}
 	}
 	led->current_brightness = led->brightness;
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 17dfe9b..87bd5ba 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -503,6 +503,101 @@ static void device_irq_exit(struct pm860x_chip *chip)
 		free_irq(chip->core_irq, chip);
 }
 
+int pm8606_osc_enable(struct pm860x_chip *chip, unsigned short client)
+{
+	int ret = -EIO;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8606) ?
+		chip->client : chip->companion;
+
+	dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client);
+	dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status);
+
+	mutex_lock(&chip->osc_lock);
+	/* Update voting status */
+	chip->osc_vote |= client;
+	/* If reference group is off - turn on*/
+	if (chip->osc_status != PM8606_REF_GP_OSC_ON) {
+		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
+		/* Enable Reference group Vsys */
+		if (pm860x_set_bits(i2c, PM8606_VSYS,
+				PM8606_VSYS_EN, PM8606_VSYS_EN))
+			goto out;
+
+		/*Enable Internal Oscillator */
+		if (pm860x_set_bits(i2c, PM8606_MISC,
+				PM8606_MISC_OSC_EN, PM8606_MISC_OSC_EN))
+			goto out;
+		/* Update status (only if writes succeed) */
+		chip->osc_status = PM8606_REF_GP_OSC_ON;
+	}
+	mutex_unlock(&chip->osc_lock);
+
+	dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status, ret);
+	return 0;
+out:
+	mutex_unlock(&chip->osc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm8606_osc_enable);
+
+int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client)
+{
+	int ret = -EIO;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8606) ?
+		chip->client : chip->companion;
+
+	dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client);
+	dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status);
+
+	mutex_lock(&chip->osc_lock);
+	/*Update voting status */
+	chip->osc_vote &= ~(client);
+	/* If reference group is off and this is the last client to release
+	 * - turn off */
+	if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) &&
+			(chip->osc_vote == REF_GP_NO_CLIENTS)) {
+		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
+		/* Disable Reference group Vsys */
+		if (pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0))
+			goto out;
+		/* Disable Internal Oscillator */
+		if (pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0))
+			goto out;
+		chip->osc_status = PM8606_REF_GP_OSC_OFF;
+	}
+	mutex_unlock(&chip->osc_lock);
+
+	dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n",
+			__func__, chip->osc_vote,
+			chip->osc_status, ret);
+	return 0;
+out:
+	mutex_unlock(&chip->osc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm8606_osc_disable);
+
+static void __devinit device_osc_init(struct i2c_client *i2c)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+
+	mutex_init(&chip->osc_lock);
+	/* init portofino reference group voting and status */
+	/* Disable Reference group Vsys */
+	pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0);
+	/* Disable Internal Oscillator */
+	pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0);
+
+	chip->osc_vote = REF_GP_NO_CLIENTS;
+	chip->osc_status = PM8606_REF_GP_OSC_OFF;
+}
+
 static void __devinit device_bk_init(struct pm860x_chip *chip,
 				     struct pm860x_platform_data *pdata)
 {
@@ -767,6 +862,15 @@ out:
 	return;
 }
 
+static void __devinit device_8606_init(struct pm860x_chip *chip,
+				       struct i2c_client *i2c,
+				       struct pm860x_platform_data *pdata)
+{
+	device_osc_init(i2c);
+	device_bk_init(chip, pdata);
+	device_led_init(chip, pdata);
+}
+
 int __devinit pm860x_device_init(struct pm860x_chip *chip,
 		       struct pm860x_platform_data *pdata)
 {
@@ -774,8 +878,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip,
 
 	switch (chip->id) {
 	case CHIP_PM8606:
-		device_bk_init(chip, pdata);
-		device_led_init(chip, pdata);
+		device_8606_init(chip, chip->client, pdata);
 		break;
 	case CHIP_PM8607:
 		device_8607_init(chip, chip->client, pdata);
@@ -785,8 +888,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip,
 	if (chip->companion) {
 		switch (chip->id) {
 		case CHIP_PM8607:
-			device_bk_init(chip, pdata);
-			device_led_init(chip, pdata);
+			device_8606_init(chip, chip->companion, pdata);
 			break;
 		case CHIP_PM8606:
 			device_8607_init(chip, chip->companion, pdata);
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
index f93dd95..b2cfdc4 100644
--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -334,10 +334,35 @@ static int __devexit pm860x_remove(struct i2c_client *client)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct pm860x_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev) && chip->wakeup_flag)
+		enable_irq_wake(chip->core_irq);
+	return 0;
+}
+
+static int pm860x_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct pm860x_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev) && chip->wakeup_flag)
+		disable_irq_wake(chip->core_irq);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume);
+
 static struct i2c_driver pm860x_driver = {
 	.driver	= {
 		.name	= "88PM860x",
 		.owner	= THIS_MODULE,
+		.pm     = &pm860x_pm_ops,
 	},
 	.probe		= pm860x_probe,
 	.remove		= __devexit_p(pm860x_remove),
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 243e0c6..29f463c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -143,6 +143,21 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config MFD_TPS65217
+	tristate "TPS65217 Power Management / White LED chips"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TPS65217 series of
+	  Power Management / White LED chips.
+	  These include voltage regulators, lithium ion/polymer battery
+	  charger, wled and other features that are often used in portable
+	  devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65217.
+
 config MFD_TPS6586X
 	bool "TPS6586x Power Management chips"
 	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
@@ -162,6 +177,7 @@ config MFD_TPS65910
 	depends on I2C=y && GPIOLIB
 	select MFD_CORE
 	select GPIO_TPS65910
+	select REGMAP_I2C
 	help
 	  if you say yes here you get support for the TPS65910 series of
 	  Power Management chips.
@@ -171,7 +187,7 @@ config MFD_TPS65912
 	depends on GPIOLIB
 
 config MFD_TPS65912_I2C
-	bool "TPS95612 Power Management chip with I2C"
+	bool "TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
 	depends on I2C=y && GPIOLIB
@@ -400,7 +416,7 @@ config MFD_MAX8997
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8998/8966.
+	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 	  MUIC controls on chip.
 	  This driver provides common support for accessing the device;
@@ -812,6 +828,18 @@ config MFD_PM8XXX_IRQ
 config TPS65911_COMPARATOR
 	tristate
 
+config MFD_TPS65090
+	bool "TPS65090 Power Management chips"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the TPS65090 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_AAT2870_CORE
 	bool "Support for the AnalogicTech AAT2870"
 	select MFD_CORE
@@ -831,6 +859,28 @@ config MFD_INTEL_MSIC
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_RC5T583
+	bool "Ricoh RC5T583 Power Management system device"
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Select this option to get support for the RICOH583 Power
+	  Management system device.
+	  This driver provides common support for accessing the device
+	  through i2c interface. The device supports multiple sub-devices
+	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+	  Additional drivers must be enabled in order to use the
+	  different functionality of the device.
+
+config MFD_ANATOP
+	bool "Support for Freescale i.MX on-chip ANATOP controller"
+	depends on SOC_IMX6Q
+	help
+	  Select this option to enable Freescale i.MX on-chip ANATOP
+	  MFD controller. This controller embeds regulator and
+	  thermal devices for Freescale i.MX platforms.
+
 endmenu
 endif
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b953bab..05fa538 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o tps65910-irq.o
 tps65912-objs                   := tps65912-core.o tps65912-irq.o
 obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
@@ -109,6 +110,9 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
+obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
 obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
+obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o
+obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index d295941..1f08704 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -32,6 +32,7 @@
 #define AB8500_IT_SOURCE6_REG		0x05
 #define AB8500_IT_SOURCE7_REG		0x06
 #define AB8500_IT_SOURCE8_REG		0x07
+#define AB9540_IT_SOURCE13_REG		0x0C
 #define AB8500_IT_SOURCE19_REG		0x12
 #define AB8500_IT_SOURCE20_REG		0x13
 #define AB8500_IT_SOURCE21_REG		0x14
@@ -53,6 +54,7 @@
 #define AB8500_IT_LATCH9_REG		0x28
 #define AB8500_IT_LATCH10_REG		0x29
 #define AB8500_IT_LATCH12_REG		0x2B
+#define AB9540_IT_LATCH13_REG		0x2C
 #define AB8500_IT_LATCH19_REG		0x32
 #define AB8500_IT_LATCH20_REG		0x33
 #define AB8500_IT_LATCH21_REG		0x34
@@ -90,21 +92,39 @@
 #define AB8500_IT_MASK24_REG		0x57
 
 #define AB8500_REV_REG			0x80
+#define AB8500_IC_NAME_REG		0x82
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
 #define AB8500_TURN_ON_STATUS		0x00
 
+#define AB9540_MODEM_CTRL2_REG			0x23
+#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT	BIT(2)
+
 /*
  * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
- * numbers are indexed into this array with (num / 8).
+ * numbers are indexed into this array with (num / 8). The interupts are
+ * defined in linux/mfd/ab8500.h
  *
  * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
  * offset 0.
  */
+/* AB8500 support */
 static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
 	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
 };
 
+/* AB9540 support */
+static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = {
+	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24,
+};
+
+static const char ab8500_version_str[][7] = {
+	[AB8500_VERSION_AB8500] = "AB8500",
+	[AB8500_VERSION_AB8505] = "AB8505",
+	[AB8500_VERSION_AB9540] = "AB9540",
+	[AB8500_VERSION_AB8540] = "AB8540",
+};
+
 static int ab8500_get_chip_id(struct device *dev)
 {
 	struct ab8500 *ab8500;
@@ -127,9 +147,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
 
 	dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
 
-	ret = mutex_lock_interruptible(&ab8500->lock);
-	if (ret)
-		return ret;
+	mutex_lock(&ab8500->lock);
 
 	ret = ab8500->write(ab8500, addr, data);
 	if (ret < 0)
@@ -156,9 +174,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	 * bank on higher 8 bits and reg in lower */
 	u16 addr = ((u16)bank) << 8 | reg;
 
-	ret = mutex_lock_interruptible(&ab8500->lock);
-	if (ret)
-		return ret;
+	mutex_lock(&ab8500->lock);
 
 	ret = ab8500->read(ab8500, addr);
 	if (ret < 0)
@@ -185,31 +201,38 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	u8 reg, u8 bitmask, u8 bitvalues)
 {
 	int ret;
-	u8 data;
 	/* put the u8 bank and u8 reg together into a an u16.
 	 * bank on higher 8 bits and reg in lower */
 	u16 addr = ((u16)bank) << 8 | reg;
 
-	ret = mutex_lock_interruptible(&ab8500->lock);
-	if (ret)
-		return ret;
+	mutex_lock(&ab8500->lock);
 
-	ret = ab8500->read(ab8500, addr);
-	if (ret < 0) {
-		dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
-			addr, ret);
-		goto out;
-	}
+	if (ab8500->write_masked == NULL) {
+		u8 data;
 
-	data = (u8)ret;
-	data = (~bitmask & data) | (bitmask & bitvalues);
+		ret = ab8500->read(ab8500, addr);
+		if (ret < 0) {
+			dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
+				addr, ret);
+			goto out;
+		}
 
-	ret = ab8500->write(ab8500, addr, data);
-	if (ret < 0)
-		dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
-			addr, ret);
+		data = (u8)ret;
+		data = (~bitmask & data) | (bitmask & bitvalues);
+
+		ret = ab8500->write(ab8500, addr, data);
+		if (ret < 0)
+			dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
+				addr, ret);
 
-	dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data);
+		dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr,
+			data);
+		goto out;
+	}
+	ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues);
+	if (ret < 0)
+		dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr,
+			ret);
 out:
 	mutex_unlock(&ab8500->lock);
 	return ret;
@@ -248,7 +271,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data)
 	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
 	int i;
 
-	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+	for (i = 0; i < ab8500->mask_size; i++) {
 		u8 old = ab8500->oldmask[i];
 		u8 new = ab8500->mask[i];
 		int reg;
@@ -256,14 +279,17 @@ static void ab8500_irq_sync_unlock(struct irq_data *data)
 		if (new == old)
 			continue;
 
-		/* Interrupt register 12 doesn't exist prior to version 2.0 */
-		if (ab8500_irq_regoffset[i] == 11 &&
-			ab8500->chip_id < AB8500_CUT2P0)
+		/*
+		 * Interrupt register 12 doesn't exist prior to AB8500 version
+		 * 2.0
+		 */
+		if (ab8500->irq_reg_offset[i] == 11 &&
+			is_ab8500_1p1_or_earlier(ab8500))
 			continue;
 
 		ab8500->oldmask[i] = new;
 
-		reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
+		reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i];
 		set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new);
 	}
 
@@ -306,13 +332,16 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 
 	dev_vdbg(ab8500->dev, "interrupt\n");
 
-	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
-		int regoffset = ab8500_irq_regoffset[i];
+	for (i = 0; i < ab8500->mask_size; i++) {
+		int regoffset = ab8500->irq_reg_offset[i];
 		int status;
 		u8 value;
 
-		/* Interrupt register 12 doesn't exist prior to version 2.0 */
-		if (regoffset == 11 && ab8500->chip_id < AB8500_CUT2P0)
+		/*
+		 * Interrupt register 12 doesn't exist prior to AB8500 version
+		 * 2.0
+		 */
+		if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500))
 			continue;
 
 		status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
@@ -336,8 +365,16 @@ static int ab8500_irq_init(struct ab8500 *ab8500)
 {
 	int base = ab8500->irq_base;
 	int irq;
+	int num_irqs;
+
+	if (is_ab9540(ab8500))
+		num_irqs = AB9540_NR_IRQS;
+	else if (is_ab8505(ab8500))
+		num_irqs = AB8505_NR_IRQS;
+	else
+		num_irqs = AB8500_NR_IRQS;
 
-	for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+	for (irq = base; irq < base + num_irqs; irq++) {
 		irq_set_chip_data(irq, ab8500);
 		irq_set_chip_and_handler(irq, &ab8500_irq_chip,
 					 handle_simple_irq);
@@ -356,8 +393,16 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
 {
 	int base = ab8500->irq_base;
 	int irq;
+	int num_irqs;
 
-	for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+	if (is_ab9540(ab8500))
+		num_irqs = AB9540_NR_IRQS;
+	else if (is_ab8505(ab8500))
+		num_irqs = AB8505_NR_IRQS;
+	else
+		num_irqs = AB8500_NR_IRQS;
+
+	for (irq = base; irq < base + num_irqs; irq++) {
 #ifdef CONFIG_ARM
 		set_irq_flags(irq, 0);
 #endif
@@ -366,6 +411,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
 	}
 }
 
+/* AB8500 GPIO Resources */
 static struct resource __devinitdata ab8500_gpio_resources[] = {
 	{
 		.name	= "GPIO_INT6",
@@ -375,6 +421,28 @@ static struct resource __devinitdata ab8500_gpio_resources[] = {
 	}
 };
 
+/* AB9540 GPIO Resources */
+static struct resource __devinitdata ab9540_gpio_resources[] = {
+	{
+		.name	= "GPIO_INT6",
+		.start	= AB8500_INT_GPIO6R,
+		.end	= AB8500_INT_GPIO41F,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "GPIO_INT14",
+		.start	= AB9540_INT_GPIO50R,
+		.end	= AB9540_INT_GPIO54R,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "GPIO_INT15",
+		.start	= AB9540_INT_GPIO50F,
+		.end	= AB9540_INT_GPIO54F,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
 static struct resource __devinitdata ab8500_gpadc_resources[] = {
 	{
 		.name	= "HW_CONV_END",
@@ -491,12 +559,6 @@ static struct resource __devinitdata ab8500_charger_resources[] = {
 		.flags = IORESOURCE_IRQ,
 	},
 	{
-		.name = "USB_CHARGE_DET_DONE",
-		.start = AB8500_INT_USB_CHG_DET_DONE,
-		.end = AB8500_INT_USB_CHG_DET_DONE,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
 		.name = "VBUS_OVV",
 		.start = AB8500_INT_VBUS_OVV,
 		.end = AB8500_INT_VBUS_OVV,
@@ -534,14 +596,8 @@ static struct resource __devinitdata ab8500_charger_resources[] = {
 	},
 	{
 		.name = "USB_CHARGER_NOT_OKR",
-		.start = AB8500_INT_USB_CHARGER_NOT_OK,
-		.end = AB8500_INT_USB_CHARGER_NOT_OK,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_CHARGER_NOT_OKF",
-		.start = AB8500_INT_USB_CHARGER_NOT_OKF,
-		.end = AB8500_INT_USB_CHARGER_NOT_OKF,
+		.start = AB8500_INT_USB_CHARGER_NOT_OKR,
+		.end = AB8500_INT_USB_CHARGER_NOT_OKR,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -616,6 +672,12 @@ static struct resource __devinitdata ab8500_fg_resources[] = {
 		.end = AB8500_INT_CC_INT_CALIB,
 		.flags = IORESOURCE_IRQ,
 	},
+	{
+		.name = "CCEOC",
+		.start = AB8500_INT_CCEOC,
+		.end = AB8500_INT_CCEOC,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct resource __devinitdata ab8500_chargalg_resources[] = {};
@@ -630,8 +692,8 @@ static struct resource __devinitdata ab8500_debug_resources[] = {
 	},
 	{
 		.name	= "IRQ_LAST",
-		.start	= AB8500_INT_USB_CHARGER_NOT_OKF,
-		.end	= AB8500_INT_USB_CHARGER_NOT_OKF,
+		.start	= AB8500_INT_XTAL32K_KO,
+		.end	= AB8500_INT_XTAL32K_KO,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -691,7 +753,7 @@ static struct resource __devinitdata ab8500_temp_resources[] = {
 	},
 };
 
-static struct mfd_cell __devinitdata ab8500_devs[] = {
+static struct mfd_cell __devinitdata abx500_common_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -706,11 +768,6 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
 		.name = "ab8500-regulator",
 	},
 	{
-		.name = "ab8500-gpio",
-		.num_resources = ARRAY_SIZE(ab8500_gpio_resources),
-		.resources = ab8500_gpio_resources,
-	},
-	{
 		.name = "ab8500-gpadc",
 		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
 		.resources = ab8500_gpadc_resources,
@@ -748,11 +805,7 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
 	{
 		.name = "ab8500-codec",
 	},
-	{
-		.name = "ab8500-usb",
-		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
-		.resources = ab8500_usb_resources,
-	},
+
 	{
 		.name = "ab8500-poweron-key",
 		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
@@ -781,6 +834,32 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
 	},
 };
 
+static struct mfd_cell __devinitdata ab8500_devs[] = {
+	{
+		.name = "ab8500-gpio",
+		.num_resources = ARRAY_SIZE(ab8500_gpio_resources),
+		.resources = ab8500_gpio_resources,
+	},
+	{
+		.name = "ab8500-usb",
+		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
+		.resources = ab8500_usb_resources,
+	},
+};
+
+static struct mfd_cell __devinitdata ab9540_devs[] = {
+	{
+		.name = "ab8500-gpio",
+		.num_resources = ARRAY_SIZE(ab9540_gpio_resources),
+		.resources = ab9540_gpio_resources,
+	},
+	{
+		.name = "ab9540-usb",
+		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
+		.resources = ab8500_usb_resources,
+	},
+};
+
 static ssize_t show_chip_id(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -842,9 +921,64 @@ static ssize_t show_turn_on_status(struct device *dev,
 	return sprintf(buf, "%#x\n", value);
 }
 
+static ssize_t show_ab9540_dbbrstn(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ab8500 *ab8500;
+	int ret;
+	u8 value;
+
+	ab8500 = dev_get_drvdata(dev);
+
+	ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2,
+		AB9540_MODEM_CTRL2_REG, &value);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n",
+			(value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0);
+}
+
+static ssize_t store_ab9540_dbbrstn(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct ab8500 *ab8500;
+	int ret = count;
+	int err;
+	u8 bitvalues;
+
+	ab8500 = dev_get_drvdata(dev);
+
+	if (count > 0) {
+		switch (buf[0]) {
+		case '0':
+			bitvalues = 0;
+			break;
+		case '1':
+			bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT;
+			break;
+		default:
+			goto exit;
+		}
+
+		err = mask_and_set_register_interruptible(ab8500,
+			AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG,
+			AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues);
+		if (err)
+			dev_info(ab8500->dev,
+				"Failed to set DBBRSTN %c, err %#x\n",
+				buf[0], err);
+	}
+
+exit:
+	return ret;
+}
+
 static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
 static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
 static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
+static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR,
+			show_ab9540_dbbrstn, store_ab9540_dbbrstn);
 
 static struct attribute *ab8500_sysfs_entries[] = {
 	&dev_attr_chip_id.attr,
@@ -853,11 +987,23 @@ static struct attribute *ab8500_sysfs_entries[] = {
 	NULL,
 };
 
+static struct attribute *ab9540_sysfs_entries[] = {
+	&dev_attr_chip_id.attr,
+	&dev_attr_switch_off_status.attr,
+	&dev_attr_turn_on_status.attr,
+	&dev_attr_dbbrstn.attr,
+	NULL,
+};
+
 static struct attribute_group ab8500_attr_group = {
 	.attrs	= ab8500_sysfs_entries,
 };
 
-int __devinit ab8500_init(struct ab8500 *ab8500)
+static struct attribute_group ab9540_attr_group = {
+	.attrs	= ab9540_sysfs_entries,
+};
+
+int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
 {
 	struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
 	int ret;
@@ -870,25 +1016,45 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 	mutex_init(&ab8500->lock);
 	mutex_init(&ab8500->irq_lock);
 
+	if (version != AB8500_VERSION_UNDEFINED)
+		ab8500->version = version;
+	else {
+		ret = get_register_interruptible(ab8500, AB8500_MISC,
+			AB8500_IC_NAME_REG, &value);
+		if (ret < 0)
+			return ret;
+
+		ab8500->version = value;
+	}
+
 	ret = get_register_interruptible(ab8500, AB8500_MISC,
 		AB8500_REV_REG, &value);
 	if (ret < 0)
 		return ret;
 
-	switch (value) {
-	case AB8500_CUT1P0:
-	case AB8500_CUT1P1:
-	case AB8500_CUT2P0:
-	case AB8500_CUT3P0:
-	case AB8500_CUT3P3:
-		dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
-		break;
-	default:
-		dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value);
-		return -EINVAL;
-	}
 	ab8500->chip_id = value;
 
+	dev_info(ab8500->dev, "detected chip, %s rev. %1x.%1x\n",
+			ab8500_version_str[ab8500->version],
+			ab8500->chip_id >> 4,
+			ab8500->chip_id & 0x0F);
+
+	/* Configure AB8500 or AB9540 IRQ */
+	if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
+		ab8500->mask_size = AB9540_NUM_IRQ_REGS;
+		ab8500->irq_reg_offset = ab9540_irq_regoffset;
+	} else {
+		ab8500->mask_size = AB8500_NUM_IRQ_REGS;
+		ab8500->irq_reg_offset = ab8500_irq_regoffset;
+	}
+	ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL);
+	if (!ab8500->mask)
+		return -ENOMEM;
+	ab8500->oldmask = kzalloc(ab8500->mask_size, GFP_KERNEL);
+	if (!ab8500->oldmask) {
+		ret = -ENOMEM;
+		goto out_freemask;
+	}
 	/*
 	 * ab8500 has switched off due to (SWITCH_OFF_STATUS):
 	 * 0x01 Swoff bit programming
@@ -911,30 +1077,33 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 		plat->init(ab8500);
 
 	/* Clear and mask all interrupts */
-	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
-		/* Interrupt register 12 doesn't exist prior to version 2.0 */
-		if (ab8500_irq_regoffset[i] == 11 &&
-			ab8500->chip_id < AB8500_CUT2P0)
+	for (i = 0; i < ab8500->mask_size; i++) {
+		/*
+		 * Interrupt register 12 doesn't exist prior to AB8500 version
+		 * 2.0
+		 */
+		if (ab8500->irq_reg_offset[i] == 11 &&
+				is_ab8500_1p1_or_earlier(ab8500))
 			continue;
 
 		get_register_interruptible(ab8500, AB8500_INTERRUPT,
-			AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i],
+			AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i],
 			&value);
 		set_register_interruptible(ab8500, AB8500_INTERRUPT,
-			AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff);
+			AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i], 0xff);
 	}
 
 	ret = abx500_register_ops(ab8500->dev, &ab8500_ops);
 	if (ret)
-		return ret;
+		goto out_freeoldmask;
 
-	for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
+	for (i = 0; i < ab8500->mask_size; i++)
 		ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
 
 	if (ab8500->irq_base) {
 		ret = ab8500_irq_init(ab8500);
 		if (ret)
-			return ret;
+			goto out_freeoldmask;
 
 		ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq,
 					   IRQF_ONESHOT | IRQF_NO_SUSPEND,
@@ -943,17 +1112,34 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 			goto out_removeirq;
 	}
 
-	ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
-			      ARRAY_SIZE(ab8500_devs), NULL,
+	ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
+			      ARRAY_SIZE(abx500_common_devs), NULL,
 			      ab8500->irq_base);
+
 	if (ret)
 		goto out_freeirq;
 
-	ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group);
+	if (is_ab9540(ab8500))
+		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
+			      ARRAY_SIZE(ab9540_devs), NULL,
+			      ab8500->irq_base);
+	else
+		ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
+			      ARRAY_SIZE(ab9540_devs), NULL,
+			      ab8500->irq_base);
 	if (ret)
-		dev_err(ab8500->dev, "error creating sysfs entries\n");
+		goto out_freeirq;
 
-	return ret;
+	if (is_ab9540(ab8500))
+		ret = sysfs_create_group(&ab8500->dev->kobj,
+					&ab9540_attr_group);
+	else
+		ret = sysfs_create_group(&ab8500->dev->kobj,
+					&ab8500_attr_group);
+	if (ret)
+		dev_err(ab8500->dev, "error creating sysfs entries\n");
+	else
+		return ret;
 
 out_freeirq:
 	if (ab8500->irq_base)
@@ -961,18 +1147,27 @@ out_freeirq:
 out_removeirq:
 	if (ab8500->irq_base)
 		ab8500_irq_remove(ab8500);
+out_freeoldmask:
+	kfree(ab8500->oldmask);
+out_freemask:
+	kfree(ab8500->mask);
 
 	return ret;
 }
 
 int __devexit ab8500_exit(struct ab8500 *ab8500)
 {
-	sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
+	if (is_ab9540(ab8500))
+		sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group);
+	else
+		sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
 	mfd_remove_devices(ab8500->dev);
 	if (ab8500->irq_base) {
 		free_irq(ab8500->irq, ab8500);
 		ab8500_irq_remove(ab8500);
 	}
+	kfree(ab8500->oldmask);
+	kfree(ab8500->mask);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c
index 087fecd..b83045f 100644
--- a/drivers/mfd/ab8500-i2c.c
+++ b/drivers/mfd/ab8500-i2c.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 
 static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 {
@@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 	return ret;
 }
 
+static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask,
+	u8 data)
+{
+	int ret;
+
+	ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data,
+		&mask, 1);
+	if (ret < 0)
+		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret);
+	return ret;
+}
+
 static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
 {
 	int ret;
@@ -38,6 +50,7 @@ static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr)
 
 static int __devinit ab8500_i2c_probe(struct platform_device *plf)
 {
+	const struct platform_device_id *platid = platform_get_device_id(plf);
 	struct ab8500 *ab8500;
 	struct resource *resource;
 	int ret;
@@ -58,13 +71,15 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf)
 
 	ab8500->read = ab8500_i2c_read;
 	ab8500->write = ab8500_i2c_write;
+	ab8500->write_masked = ab8500_i2c_write_masked;
 
 	platform_set_drvdata(plf, ab8500);
 
-	ret = ab8500_init(ab8500);
+	ret = ab8500_init(ab8500, platid->driver_data);
 	if (ret)
 		kfree(ab8500);
 
+
 	return ret;
 }
 
@@ -78,13 +93,22 @@ static int __devexit ab8500_i2c_remove(struct platform_device *plf)
 	return 0;
 }
 
+static const struct platform_device_id ab8500_id[] = {
+	{ "ab8500-i2c", AB8500_VERSION_AB8500 },
+	{ "ab8505-i2c", AB8500_VERSION_AB8505 },
+	{ "ab9540-i2c", AB8500_VERSION_AB9540 },
+	{ "ab8540-i2c", AB8500_VERSION_AB8540 },
+	{ }
+};
+
 static struct platform_driver ab8500_i2c_driver = {
 	.driver = {
 		.name = "ab8500-i2c",
 		.owner = THIS_MODULE,
 	},
 	.probe	= ab8500_i2c_probe,
-	.remove	= __devexit_p(ab8500_i2c_remove)
+	.remove	= __devexit_p(ab8500_i2c_remove),
+	.id_table = ab8500_id,
 };
 
 static int __init ab8500_i2c_init(void)
diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c
new file mode 100644
index 0000000..2af4248
--- /dev/null
+++ b/drivers/mfd/anatop-mfd.c
@@ -0,0 +1,137 @@
+/*
+ * Anatop MFD driver
+ *
+ * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ * Copyright (C) 2012 Linaro
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/anatop.h>
+
+u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift,
+		    int bit_width)
+{
+	u32 val, mask;
+
+	if (bit_width == 32)
+		mask = ~0;
+	else
+		mask = (1 << bit_width) - 1;
+
+	val = readl(adata->ioreg + addr);
+	val = (val >> bit_shift) & mask;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(anatop_get_bits);
+
+void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift,
+		     int bit_width, u32 data)
+{
+	u32 val, mask;
+
+	if (bit_width == 32)
+		mask = ~0;
+	else
+		mask = (1 << bit_width) - 1;
+
+	spin_lock(&adata->reglock);
+	val = readl(adata->ioreg + addr) & ~(mask << bit_shift);
+	writel((data << bit_shift) | val, adata->ioreg + addr);
+	spin_unlock(&adata->reglock);
+}
+EXPORT_SYMBOL_GPL(anatop_set_bits);
+
+static const struct of_device_id of_anatop_match[] = {
+	{ .compatible = "fsl,imx6q-anatop", },
+	{ },
+};
+
+static int __devinit of_anatop_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void *ioreg;
+	struct anatop *drvdata;
+
+	ioreg = of_iomap(np, 0);
+	if (!ioreg)
+		return -EADDRNOTAVAIL;
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	drvdata->ioreg = ioreg;
+	spin_lock_init(&drvdata->reglock);
+	platform_set_drvdata(pdev, drvdata);
+	of_platform_populate(np, of_anatop_match, NULL, dev);
+
+	return 0;
+}
+
+static int __devexit of_anatop_remove(struct platform_device *pdev)
+{
+	struct anatop *drvdata;
+	drvdata = platform_get_drvdata(pdev);
+	iounmap(drvdata->ioreg);
+
+	return 0;
+}
+
+static struct platform_driver anatop_of_driver = {
+	.driver = {
+		.name = "anatop-mfd",
+		.owner = THIS_MODULE,
+		.of_match_table = of_anatop_match,
+	},
+	.probe		= of_anatop_probe,
+	.remove		= of_anatop_remove,
+};
+
+static int __init anatop_init(void)
+{
+	return platform_driver_register(&anatop_of_driver);
+}
+postcore_initcall(anatop_init);
+
+static void __exit anatop_exit(void)
+{
+	platform_driver_unregister(&anatop_of_driver);
+}
+module_exit(anatop_exit);
+
+MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
+MODULE_DESCRIPTION("ANATOP MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index b85bbd7..1895cf9 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -525,6 +525,11 @@ static void asic3_gpio_set(struct gpio_chip *chip,
 	return;
 }
 
+static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO;
+}
+
 static __init int asic3_gpio_probe(struct platform_device *pdev,
 				   u16 *gpio_config, int num)
 {
@@ -976,6 +981,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	asic->gpio.set = asic3_gpio_set;
 	asic->gpio.direction_input = asic3_gpio_direction_input;
 	asic->gpio.direction_output = asic3_gpio_direction_output;
+	asic->gpio.to_irq = asic3_gpio_to_irq;
 
 	ret = asic3_gpio_probe(pdev,
 			       pdata->gpio_config,
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index 5ddde2a..7ff313f 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -16,7 +16,6 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -647,8 +646,6 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id)
 	struct irq_desc *desc;
 	int ret;
 
-	mutex_init(&da9052->io_lock);
-
 	if (pdata && pdata->init != NULL)
 		pdata->init(da9052);
 
diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index 44b97c7..36b88e3 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -74,24 +74,27 @@ static int __devinit da9052_i2c_probe(struct i2c_client *client,
 
 	ret = da9052_i2c_enable_multiwrite(da9052);
 	if (ret < 0)
-		goto err;
+		goto err_regmap;
 
 	ret = da9052_device_init(da9052, id->driver_data);
 	if (ret != 0)
-		goto err;
+		goto err_regmap;
 
 	return 0;
 
+err_regmap:
+	regmap_exit(da9052->regmap);
 err:
 	kfree(da9052);
 	return ret;
 }
 
-static int da9052_i2c_remove(struct i2c_client *client)
+static int __devexit da9052_i2c_remove(struct i2c_client *client)
 {
 	struct da9052 *da9052 = i2c_get_clientdata(client);
 
 	da9052_device_exit(da9052);
+	regmap_exit(da9052->regmap);
 	kfree(da9052);
 
 	return 0;
@@ -107,7 +110,7 @@ static struct i2c_device_id da9052_i2c_id[] = {
 
 static struct i2c_driver da9052_i2c_driver = {
 	.probe = da9052_i2c_probe,
-	.remove = da9052_i2c_remove,
+	.remove = __devexit_p(da9052_i2c_remove),
 	.id_table = da9052_i2c_id,
 	.driver = {
 		.name = "da9052",
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index cdbc7ca..6faf149 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -21,7 +21,7 @@
 
 #include <linux/mfd/da9052/da9052.h>
 
-static int da9052_spi_probe(struct spi_device *spi)
+static int __devinit da9052_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -52,20 +52,23 @@ static int da9052_spi_probe(struct spi_device *spi)
 
 	ret = da9052_device_init(da9052, id->driver_data);
 	if (ret != 0)
-		goto err;
+		goto err_regmap;
 
 	return 0;
 
+err_regmap:
+	regmap_exit(da9052->regmap);
 err:
 	kfree(da9052);
 	return ret;
 }
 
-static int da9052_spi_remove(struct spi_device *spi)
+static int __devexit da9052_spi_remove(struct spi_device *spi)
 {
 	struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
 
 	da9052_device_exit(da9052);
+	regmap_exit(da9052->regmap);
 	kfree(da9052);
 
 	return 0;
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index af8e0ef..ebc1e86 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -30,6 +30,7 @@
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
+#include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
@@ -39,11 +40,6 @@
 /* Offset for the firmware version within the TCPM */
 #define PRCMU_FW_VERSION_OFFSET 0xA4
 
-/* PRCMU project numbers, defined by PRCMU FW */
-#define PRCMU_PROJECT_ID_8500V1_0 1
-#define PRCMU_PROJECT_ID_8500V2_0 2
-#define PRCMU_PROJECT_ID_8400V2_0 3
-
 /* Index of different voltages to be used when accessing AVSData */
 #define PRCM_AVS_BASE		0x2FC
 #define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
@@ -137,6 +133,8 @@
 #define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
 #define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
 #define PRCM_REQ_MB1_PLL_ON_OFF			(PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC0_OFF	0x1
+#define PLL_SOC0_ON	0x2
 #define PLL_SOC1_OFF	0x4
 #define PLL_SOC1_ON	0x8
 
@@ -266,6 +264,11 @@
 #define WAKEUP_BIT_GPIO7 BIT(30)
 #define WAKEUP_BIT_GPIO8 BIT(31)
 
+static struct {
+	bool valid;
+	struct prcmu_fw_version version;
+} fw_info;
+
 /*
  * This vector maps irq numbers to the bits in the bit field used in
  * communication with the PRCMU firmware.
@@ -341,11 +344,13 @@ static struct {
  * mb1_transfer - state needed for mailbox 1 communication.
  * @lock:	The transaction lock.
  * @work:	The transaction completion structure.
+ * @ape_opp:	The current APE OPP.
  * @ack:	Reply ("acknowledge") data.
  */
 static struct {
 	struct mutex lock;
 	struct completion work;
+	u8 ape_opp;
 	struct {
 		u8 header;
 		u8 arm_opp;
@@ -413,79 +418,102 @@ static struct {
 static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
 
 /* Spinlocks */
+static DEFINE_SPINLOCK(prcmu_lock);
 static DEFINE_SPINLOCK(clkout_lock);
-static DEFINE_SPINLOCK(gpiocr_lock);
 
 /* Global var to runtime determine TCDM base for v2 or v1 */
 static __iomem void *tcdm_base;
 
 struct clk_mgt {
-	unsigned int offset;
+	void __iomem *reg;
 	u32 pllsw;
+	int branch;
+	bool clk38div;
+};
+
+enum {
+	PLL_RAW,
+	PLL_FIX,
+	PLL_DIV
 };
 
 static DEFINE_SPINLOCK(clk_mgt_lock);
 
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
+#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
+	{ (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
 struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
-	CLK_MGT_ENTRY(SGACLK),
-	CLK_MGT_ENTRY(UARTCLK),
-	CLK_MGT_ENTRY(MSP02CLK),
-	CLK_MGT_ENTRY(MSP1CLK),
-	CLK_MGT_ENTRY(I2CCLK),
-	CLK_MGT_ENTRY(SDMMCCLK),
-	CLK_MGT_ENTRY(SLIMCLK),
-	CLK_MGT_ENTRY(PER1CLK),
-	CLK_MGT_ENTRY(PER2CLK),
-	CLK_MGT_ENTRY(PER3CLK),
-	CLK_MGT_ENTRY(PER5CLK),
-	CLK_MGT_ENTRY(PER6CLK),
-	CLK_MGT_ENTRY(PER7CLK),
-	CLK_MGT_ENTRY(LCDCLK),
-	CLK_MGT_ENTRY(BMLCLK),
-	CLK_MGT_ENTRY(HSITXCLK),
-	CLK_MGT_ENTRY(HSIRXCLK),
-	CLK_MGT_ENTRY(HDMICLK),
-	CLK_MGT_ENTRY(APEATCLK),
-	CLK_MGT_ENTRY(APETRACECLK),
-	CLK_MGT_ENTRY(MCDECLK),
-	CLK_MGT_ENTRY(IPI2CCLK),
-	CLK_MGT_ENTRY(DSIALTCLK),
-	CLK_MGT_ENTRY(DMACLK),
-	CLK_MGT_ENTRY(B2R2CLK),
-	CLK_MGT_ENTRY(TVCLK),
-	CLK_MGT_ENTRY(SSPCLK),
-	CLK_MGT_ENTRY(RNGCLK),
-	CLK_MGT_ENTRY(UICCCLK),
+	CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
+	CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
+	CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
+	CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
+};
+
+struct dsiclk {
+	u32 divsel_mask;
+	u32 divsel_shift;
+	u32 divsel;
+};
+
+static struct dsiclk dsiclk[2] = {
+	{
+		.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
+		.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
+		.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+	},
+	{
+		.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
+		.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
+		.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+	}
 };
 
-static struct regulator *hwacc_regulator[NUM_HW_ACC];
-static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
-
-static bool hwacc_enabled[NUM_HW_ACC];
-static bool hwacc_ret_enabled[NUM_HW_ACC];
-
-static const char *hwacc_regulator_name[NUM_HW_ACC] = {
-	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp",
-	[HW_ACC_SVAPIPE]	= "hwacc-sva-pipe",
-	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp",
-	[HW_ACC_SIAPIPE]	= "hwacc-sia-pipe",
-	[HW_ACC_SGA]		= "hwacc-sga",
-	[HW_ACC_B2R2]		= "hwacc-b2r2",
-	[HW_ACC_MCDE]		= "hwacc-mcde",
-	[HW_ACC_ESRAM1]		= "hwacc-esram1",
-	[HW_ACC_ESRAM2]		= "hwacc-esram2",
-	[HW_ACC_ESRAM3]		= "hwacc-esram3",
-	[HW_ACC_ESRAM4]		= "hwacc-esram4",
+struct dsiescclk {
+	u32 en;
+	u32 div_mask;
+	u32 div_shift;
 };
 
-static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
-	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp-ret",
-	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp-ret",
-	[HW_ACC_ESRAM1]		= "hwacc-esram1-ret",
-	[HW_ACC_ESRAM2]		= "hwacc-esram2-ret",
-	[HW_ACC_ESRAM3]		= "hwacc-esram3-ret",
-	[HW_ACC_ESRAM4]		= "hwacc-esram4-ret",
+static struct dsiescclk dsiescclk[3] = {
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
+	},
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
+	},
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
+	}
 };
 
 /*
@@ -503,9 +531,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
 /* PLLDIV=12, PLLSW=4 (PLLDDR) */
 #define PRCMU_DSI_CLOCK_SETTING		0x0000008C
 
-/* PLLDIV=8, PLLSW=4 (PLLDDR) */
-#define PRCMU_DSI_CLOCK_SETTING_U8400	0x00000088
-
 /* DPI 50000000 Hz */
 #define PRCMU_DPI_CLOCK_SETTING		((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
 					  (16 << PRCMU_CLK_PLL_DIV_SHIFT))
@@ -514,9 +539,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
 /* D=101, N=1, R=4, SELDIV2=0 */
 #define PRCMU_PLLDSI_FREQ_SETTING	0x00040165
 
-/* D=70, N=1, R=3, SELDIV2=0 */
-#define PRCMU_PLLDSI_FREQ_SETTING_U8400	0x00030146
-
 #define PRCMU_ENABLE_PLLDSI		0x00000001
 #define PRCMU_DISABLE_PLLDSI		0x00000000
 #define PRCMU_RELEASE_RESET_DSS		0x0000400C
@@ -528,30 +550,17 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
 
 #define PRCMU_PLLDSI_LOCKP_LOCKED	0x3
 
-static struct {
-	u8 project_number;
-	u8 api_version;
-	u8 func_version;
-	u8 errata;
-} prcmu_version;
-
-
 int db8500_prcmu_enable_dsipll(void)
 {
 	int i;
-	unsigned int plldsifreq;
 
 	/* Clear DSIPLL_RESETN */
 	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
 	/* Unclamp DSIPLL in/out */
 	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
 
-	if (prcmu_is_u8400())
-		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
-	else
-		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
 	/* Set DSI PLL FREQ */
-	writel(plldsifreq, PRCM_PLLDSI_FREQ);
+	writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
 	writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
 	/* Enable Escape clocks */
 	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
@@ -583,12 +592,6 @@ int db8500_prcmu_disable_dsipll(void)
 int db8500_prcmu_set_display_clocks(void)
 {
 	unsigned long flags;
-	unsigned int dsiclk;
-
-	if (prcmu_is_u8400())
-		dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
-	else
-		dsiclk = PRCMU_DSI_CLOCK_SETTING;
 
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
@@ -596,7 +599,7 @@ int db8500_prcmu_set_display_clocks(void)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	writel(dsiclk, PRCM_HDMICLK_MGT);
+	writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
 	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
 	writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
 
@@ -608,43 +611,41 @@ int db8500_prcmu_set_display_clocks(void)
 	return 0;
 }
 
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-void prcmu_enable_spi2(void)
+u32 db8500_prcmu_read(unsigned int reg)
+{
+	return readl(_PRCMU_BASE + reg);
+}
+
+void db8500_prcmu_write(unsigned int reg, u32 value)
 {
-	u32 reg;
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(PRCM_GPIOCR);
-	writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
-	spin_unlock_irqrestore(&gpiocr_lock, flags);
+	spin_lock_irqsave(&prcmu_lock, flags);
+	writel(value, (_PRCMU_BASE + reg));
+	spin_unlock_irqrestore(&prcmu_lock, flags);
 }
 
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-void prcmu_disable_spi2(void)
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
 {
-	u32 reg;
+	u32 val;
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(PRCM_GPIOCR);
-	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
-	spin_unlock_irqrestore(&gpiocr_lock, flags);
+	spin_lock_irqsave(&prcmu_lock, flags);
+	val = readl(_PRCMU_BASE + reg);
+	val = ((val & ~mask) | (value & mask));
+	writel(val, (_PRCMU_BASE + reg));
+	spin_unlock_irqrestore(&prcmu_lock, flags);
 }
 
-bool prcmu_has_arm_maxopp(void)
+struct prcmu_fw_version *prcmu_get_fw_version(void)
 {
-	return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
-		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
+	return fw_info.valid ? &fw_info.version : NULL;
 }
 
-bool prcmu_is_u8400(void)
+bool prcmu_has_arm_maxopp(void)
 {
-	return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
+	return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
+		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
 }
 
 /**
@@ -787,6 +788,124 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 	return 0;
 }
 
+u8 db8500_prcmu_get_power_state_result(void)
+{
+	return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
+}
+
+/* This function decouple the gic from the prcmu */
+int db8500_prcmu_gic_decouple(void)
+{
+	u32 val = readl(PRCM_A9_MASK_REQ);
+
+	/* Set bit 0 register value to 1 */
+	writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ,
+	       PRCM_A9_MASK_REQ);
+
+	/* Make sure the register is updated */
+	readl(PRCM_A9_MASK_REQ);
+
+	/* Wait a few cycles for the gic mask completion */
+	udelay(1);
+
+	return 0;
+}
+
+/* This function recouple the gic with the prcmu */
+int db8500_prcmu_gic_recouple(void)
+{
+	u32 val = readl(PRCM_A9_MASK_REQ);
+
+	/* Set bit 0 register value to 0 */
+	writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ);
+
+	return 0;
+}
+
+#define PRCMU_GIC_NUMBER_REGS 5
+
+/*
+ * This function checks if there are pending irq on the gic. It only
+ * makes sense if the gic has been decoupled before with the
+ * db8500_prcmu_gic_decouple function. Disabling an interrupt only
+ * disables the forwarding of the interrupt to any CPU interface. It
+ * does not prevent the interrupt from changing state, for example
+ * becoming pending, or active and pending if it is already
+ * active. Hence, we have to check the interrupt is pending *and* is
+ * active.
+ */
+bool db8500_prcmu_gic_pending_irq(void)
+{
+	u32 pr; /* Pending register */
+	u32 er; /* Enable register */
+	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+	int i;
+
+        /* 5 registers. STI & PPI not skipped */
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
+
+		pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
+		er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+		if (pr & er)
+			return true; /* There is a pending interrupt */
+	}
+
+	return false;
+}
+
+/*
+ * This function checks if there are pending interrupt on the
+ * prcmu which has been delegated to monitor the irqs with the
+ * db8500_prcmu_copy_gic_settings function.
+ */
+bool db8500_prcmu_pending_irq(void)
+{
+	u32 it, im;
+	int i;
+
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+		it = readl(PRCM_ARMITVAL31TO0 + i * 4);
+		im = readl(PRCM_ARMITMSK31TO0 + i * 4);
+		if (it & im)
+			return true; /* There is a pending interrupt */
+	}
+
+	return false;
+}
+
+/*
+ * This function checks if the specified cpu is in in WFI. It's usage
+ * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
+ * function. Of course passing smp_processor_id() to this function will
+ * always return false...
+ */
+bool db8500_prcmu_is_cpu_in_wfi(int cpu)
+{
+	return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
+		     PRCM_ARM_WFI_STANDBY_WFI0;
+}
+
+/*
+ * This function copies the gic SPI settings to the prcmu in order to
+ * monitor them and abort/finish the retention/off sequence or state.
+ */
+int db8500_prcmu_copy_gic_settings(void)
+{
+	u32 er; /* Enable register */
+	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+	int i;
+
+        /* We skip the STI and PPI */
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+		er = readl_relaxed(dist_base +
+				   GIC_DIST_ENABLE_SET + (i + 1) * 4);
+		writel(er, PRCM_ARMITMSK31TO0 + i * 4);
+	}
+
+	return 0;
+}
+
 /* This function should only be called while mb0_transfer.lock is held. */
 static void config_wakeups(void)
 {
@@ -909,23 +1028,23 @@ int db8500_prcmu_get_arm_opp(void)
 }
 
 /**
- * prcmu_get_ddr_opp - get the current DDR OPP
+ * db8500_prcmu_get_ddr_opp - get the current DDR OPP
  *
  * Returns: the current DDR OPP
  */
-int prcmu_get_ddr_opp(void)
+int db8500_prcmu_get_ddr_opp(void)
 {
 	return readb(PRCM_DDR_SUBSYS_APE_MINBW);
 }
 
 /**
- * set_ddr_opp - set the appropriate DDR OPP
+ * db8500_set_ddr_opp - set the appropriate DDR OPP
  * @opp: The new DDR operating point to which transition is to be made
  * Returns: 0 on success, non-zero on failure
  *
  * This function sets the operating point of the DDR.
  */
-int prcmu_set_ddr_opp(u8 opp)
+int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
 		return -EINVAL;
@@ -935,25 +1054,82 @@ int prcmu_set_ddr_opp(u8 opp)
 
 	return 0;
 }
+
+/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
+static void request_even_slower_clocks(bool enable)
+{
+	void __iomem *clock_reg[] = {
+		PRCM_ACLK_MGT,
+		PRCM_DMACLK_MGT
+	};
+	unsigned long flags;
+	unsigned int i;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
+		u32 val;
+		u32 div;
+
+		val = readl(clock_reg[i]);
+		div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
+		if (enable) {
+			if ((div <= 1) || (div > 15)) {
+				pr_err("prcmu: Bad clock divider %d in %s\n",
+					div, __func__);
+				goto unlock_and_return;
+			}
+			div <<= 1;
+		} else {
+			if (div <= 2)
+				goto unlock_and_return;
+			div >>= 1;
+		}
+		val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
+			(div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
+		writel(val, clock_reg[i]);
+	}
+
+unlock_and_return:
+	/* Release the HW semaphore. */
+	writel(0, PRCM_SEM);
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
 /**
- * set_ape_opp - set the appropriate APE OPP
+ * db8500_set_ape_opp - set the appropriate APE OPP
  * @opp: The new APE operating point to which transition is to be made
  * Returns: 0 on success, non-zero on failure
  *
  * This function sets the operating point of the APE.
  */
-int prcmu_set_ape_opp(u8 opp)
+int db8500_prcmu_set_ape_opp(u8 opp)
 {
 	int r = 0;
 
+	if (opp == mb1_transfer.ape_opp)
+		return 0;
+
 	mutex_lock(&mb1_transfer.lock);
 
+	if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
+		request_even_slower_clocks(false);
+
+	if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
+		goto skip_message;
+
 	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
-	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
+	writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp),
+		(tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
 	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
@@ -962,17 +1138,24 @@ int prcmu_set_ape_opp(u8 opp)
 		(mb1_transfer.ack.ape_opp != opp))
 		r = -EIO;
 
+skip_message:
+	if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
+		(r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
+		request_even_slower_clocks(true);
+	if (!r)
+		mb1_transfer.ape_opp = opp;
+
 	mutex_unlock(&mb1_transfer.lock);
 
 	return r;
 }
 
 /**
- * prcmu_get_ape_opp - get the current APE OPP
+ * db8500_prcmu_get_ape_opp - get the current APE OPP
  *
  * Returns: the current APE OPP
  */
-int prcmu_get_ape_opp(void)
+int db8500_prcmu_get_ape_opp(void)
 {
 	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
 }
@@ -1056,7 +1239,9 @@ static int request_pll(u8 clock, bool enable)
 {
 	int r = 0;
 
-	if (clock == PRCMU_PLLSOC1)
+	if (clock == PRCMU_PLLSOC0)
+		clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
+	else if (clock == PRCMU_PLLSOC1)
 		clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
 	else
 		return -EINVAL;
@@ -1081,132 +1266,6 @@ static int request_pll(u8 clock, bool enable)
 }
 
 /**
- * prcmu_set_hwacc - set the power state of a h/w accelerator
- * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
- * @state: The new power state (enum hw_acc_state).
- *
- * This function sets the power state of a hardware accelerator.
- * This function should not be called from interrupt context.
- *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator framework API.
- */
-int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
-{
-	int r = 0;
-	bool ram_retention = false;
-	bool enable, enable_ret;
-
-	/* check argument */
-	BUG_ON(hwacc_dev >= NUM_HW_ACC);
-
-	/* get state of switches */
-	enable = hwacc_enabled[hwacc_dev];
-	enable_ret = hwacc_ret_enabled[hwacc_dev];
-
-	/* set flag if retention is possible */
-	switch (hwacc_dev) {
-	case HW_ACC_SVAMMDSP:
-	case HW_ACC_SIAMMDSP:
-	case HW_ACC_ESRAM1:
-	case HW_ACC_ESRAM2:
-	case HW_ACC_ESRAM3:
-	case HW_ACC_ESRAM4:
-		ram_retention = true;
-		break;
-	}
-
-	/* check argument */
-	BUG_ON(state > HW_ON);
-	BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
-
-	/* modify enable flags */
-	switch (state) {
-	case HW_OFF:
-		enable_ret = false;
-		enable = false;
-		break;
-	case HW_ON:
-		enable = true;
-		break;
-	case HW_OFF_RAMRET:
-		enable_ret = true;
-		enable = false;
-		break;
-	}
-
-	/* get regulator (lazy) */
-	if (hwacc_regulator[hwacc_dev] == NULL) {
-		hwacc_regulator[hwacc_dev] = regulator_get(NULL,
-			hwacc_regulator_name[hwacc_dev]);
-		if (IS_ERR(hwacc_regulator[hwacc_dev])) {
-			pr_err("prcmu: failed to get supply %s\n",
-				hwacc_regulator_name[hwacc_dev]);
-			r = PTR_ERR(hwacc_regulator[hwacc_dev]);
-			goto out;
-		}
-	}
-
-	if (ram_retention) {
-		if (hwacc_ret_regulator[hwacc_dev] == NULL) {
-			hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
-				hwacc_ret_regulator_name[hwacc_dev]);
-			if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
-				pr_err("prcmu: failed to get supply %s\n",
-					hwacc_ret_regulator_name[hwacc_dev]);
-				r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
-				goto out;
-			}
-		}
-	}
-
-	/* set regulators */
-	if (ram_retention) {
-		if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
-			r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
-			if (r < 0) {
-				pr_err("prcmu_set_hwacc: ret enable failed\n");
-				goto out;
-			}
-			hwacc_ret_enabled[hwacc_dev] = true;
-		}
-	}
-
-	if (enable && !hwacc_enabled[hwacc_dev]) {
-		r = regulator_enable(hwacc_regulator[hwacc_dev]);
-		if (r < 0) {
-			pr_err("prcmu_set_hwacc: enable failed\n");
-			goto out;
-		}
-		hwacc_enabled[hwacc_dev] = true;
-	}
-
-	if (!enable && hwacc_enabled[hwacc_dev]) {
-		r = regulator_disable(hwacc_regulator[hwacc_dev]);
-		if (r < 0) {
-			pr_err("prcmu_set_hwacc: disable failed\n");
-			goto out;
-		}
-		hwacc_enabled[hwacc_dev] = false;
-	}
-
-	if (ram_retention) {
-		if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
-			r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
-			if (r < 0) {
-				pr_err("prcmu_set_hwacc: ret disable failed\n");
-				goto out;
-			}
-			hwacc_ret_enabled[hwacc_dev] = false;
-		}
-	}
-
-out:
-	return r;
-}
-EXPORT_SYMBOL(prcmu_set_hwacc);
-
-/**
  * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
  * @epod_id: The EPOD to set
  * @epod_state: The new EPOD state
@@ -1375,7 +1434,7 @@ static int request_timclk(bool enable)
 	return 0;
 }
 
-static int request_reg_clock(u8 clock, bool enable)
+static int request_clock(u8 clock, bool enable)
 {
 	u32 val;
 	unsigned long flags;
@@ -1386,14 +1445,14 @@ static int request_reg_clock(u8 clock, bool enable)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
+	val = readl(clk_mgt[clock].reg);
 	if (enable) {
 		val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
 	} else {
 		clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
 		val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
 	}
-	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
+	writel(val, clk_mgt[clock].reg);
 
 	/* Release the HW semaphore. */
 	writel(0, PRCM_SEM);
@@ -1413,7 +1472,7 @@ static int request_sga_clock(u8 clock, bool enable)
 		writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
 	}
 
-	ret = request_reg_clock(clock, enable);
+	ret = request_clock(clock, enable);
 
 	if (!ret && !enable) {
 		val = readl(PRCM_CGATING_BYPASS);
@@ -1423,6 +1482,78 @@ static int request_sga_clock(u8 clock, bool enable)
 	return ret;
 }
 
+static inline bool plldsi_locked(void)
+{
+	return (readl(PRCM_PLLDSI_LOCKP) &
+		(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+		 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
+		(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+		 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
+}
+
+static int request_plldsi(bool enable)
+{
+	int r = 0;
+	u32 val;
+
+	writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+		PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
+		PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
+
+	val = readl(PRCM_PLLDSI_ENABLE);
+	if (enable)
+		val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+	else
+		val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+	writel(val, PRCM_PLLDSI_ENABLE);
+
+	if (enable) {
+		unsigned int i;
+		bool locked = plldsi_locked();
+
+		for (i = 10; !locked && (i > 0); --i) {
+			udelay(100);
+			locked = plldsi_locked();
+		}
+		if (locked) {
+			writel(PRCM_APE_RESETN_DSIPLL_RESETN,
+				PRCM_APE_RESETN_SET);
+		} else {
+			writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+				PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+				PRCM_MMIP_LS_CLAMP_SET);
+			val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+			writel(val, PRCM_PLLDSI_ENABLE);
+			r = -EAGAIN;
+		}
+	} else {
+		writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
+	}
+	return r;
+}
+
+static int request_dsiclk(u8 n, bool enable)
+{
+	u32 val;
+
+	val = readl(PRCM_DSI_PLLOUT_SEL);
+	val &= ~dsiclk[n].divsel_mask;
+	val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
+		dsiclk[n].divsel_shift);
+	writel(val, PRCM_DSI_PLLOUT_SEL);
+	return 0;
+}
+
+static int request_dsiescclk(u8 n, bool enable)
+{
+	u32 val;
+
+	val = readl(PRCM_DSITVCLK_DIV);
+	enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
+	writel(val, PRCM_DSITVCLK_DIV);
+	return 0;
+}
+
 /**
  * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
  * @clock:      The clock for which the request is made.
@@ -1433,21 +1564,435 @@ static int request_sga_clock(u8 clock, bool enable)
  */
 int db8500_prcmu_request_clock(u8 clock, bool enable)
 {
-	switch(clock) {
-	case PRCMU_SGACLK:
+	if (clock == PRCMU_SGACLK)
 		return request_sga_clock(clock, enable);
-	case PRCMU_TIMCLK:
+	else if (clock < PRCMU_NUM_REG_CLOCKS)
+		return request_clock(clock, enable);
+	else if (clock == PRCMU_TIMCLK)
 		return request_timclk(enable);
-	case PRCMU_SYSCLK:
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
+	else if (clock == PRCMU_PLLDSI)
+		return request_plldsi(enable);
+	else if (clock == PRCMU_SYSCLK)
 		return request_sysclk(enable);
-	case PRCMU_PLLSOC1:
+	else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
 		return request_pll(clock, enable);
+	else
+		return -EINVAL;
+}
+
+static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
+	int branch)
+{
+	u64 rate;
+	u32 val;
+	u32 d;
+	u32 div = 1;
+
+	val = readl(reg);
+
+	rate = src_rate;
+	rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
+
+	d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
+	if (d > 1)
+		div *= d;
+
+	d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
+	if (d > 1)
+		div *= d;
+
+	if (val & PRCM_PLL_FREQ_SELDIV2)
+		div *= 2;
+
+	if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
+		(val & PRCM_PLL_FREQ_DIV2EN) &&
+		((reg == PRCM_PLLSOC0_FREQ) ||
+		 (reg == PRCM_PLLDDR_FREQ))))
+		div *= 2;
+
+	(void)do_div(rate, div);
+
+	return (unsigned long)rate;
+}
+
+#define ROOT_CLOCK_RATE 38400000
+
+static unsigned long clock_rate(u8 clock)
+{
+	u32 val;
+	u32 pllsw;
+	unsigned long rate = ROOT_CLOCK_RATE;
+
+	val = readl(clk_mgt[clock].reg);
+
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
+			rate /= 2;
+		return rate;
+	}
+
+	val |= clk_mgt[clock].pllsw;
+	pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+
+	if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+		rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
+	else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+		rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
+	else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
+		rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
+	else
+		return 0;
+
+	if ((clock == PRCMU_SGACLK) &&
+		(val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
+		u64 r = (rate * 10);
+
+		(void)do_div(r, 25);
+		return (unsigned long)r;
+	}
+	val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+	if (val)
+		return rate / val;
+	else
+		return 0;
+}
+
+static unsigned long dsiclk_rate(u8 n)
+{
+	u32 divsel;
+	u32 div = 1;
+
+	divsel = readl(PRCM_DSI_PLLOUT_SEL);
+	divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
+
+	if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
+		divsel = dsiclk[n].divsel;
+
+	switch (divsel) {
+	case PRCM_DSI_PLLOUT_SEL_PHI_4:
+		div *= 2;
+	case PRCM_DSI_PLLOUT_SEL_PHI_2:
+		div *= 2;
+	case PRCM_DSI_PLLOUT_SEL_PHI:
+		return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+			PLL_RAW) / div;
 	default:
-		break;
+		return 0;
+	}
+}
+
+static unsigned long dsiescclk_rate(u8 n)
+{
+	u32 div;
+
+	div = readl(PRCM_DSITVCLK_DIV);
+	div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
+	return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
+}
+
+unsigned long prcmu_clock_rate(u8 clock)
+{
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		return clock_rate(clock);
+	else if (clock == PRCMU_TIMCLK)
+		return ROOT_CLOCK_RATE / 16;
+	else if (clock == PRCMU_SYSCLK)
+		return ROOT_CLOCK_RATE;
+	else if (clock == PRCMU_PLLSOC0)
+		return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLSOC1)
+		return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLDDR)
+		return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLDSI)
+		return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+			PLL_RAW);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return dsiclk_rate(clock - PRCMU_DSI0CLK);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
+	else
+		return 0;
+}
+
+static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
+{
+	if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
+		return ROOT_CLOCK_RATE;
+	clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
+	if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+		return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
+	else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+		return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
+	else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
+		return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
+	else
+		return 0;
+}
+
+static u32 clock_divider(unsigned long src_rate, unsigned long rate)
+{
+	u32 div;
+
+	div = (src_rate / rate);
+	if (div == 0)
+		return 1;
+	if (rate < (src_rate / div))
+		div++;
+	return div;
+}
+
+static long round_clock_rate(u8 clock, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	val = readl(clk_mgt[clock].reg);
+	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+		clk_mgt[clock].branch);
+	div = clock_divider(src_rate, rate);
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div) {
+			if (div > 2)
+				div = 2;
+		} else {
+			div = 1;
+		}
+	} else if ((clock == PRCMU_SGACLK) && (div == 3)) {
+		u64 r = (src_rate * 10);
+
+		(void)do_div(r, 25);
+		if (r <= rate)
+			return (unsigned long)r;
+	}
+	rounded_rate = (src_rate / min(div, (u32)31));
+
+	return rounded_rate;
+}
+
+#define MIN_PLL_VCO_RATE 600000000ULL
+#define MAX_PLL_VCO_RATE 1680640000ULL
+
+static long round_plldsi_rate(unsigned long rate)
+{
+	long rounded_rate = 0;
+	unsigned long src_rate;
+	unsigned long rem;
+	u32 r;
+
+	src_rate = clock_rate(PRCMU_HDMICLK);
+	rem = rate;
+
+	for (r = 7; (rem > 0) && (r > 0); r--) {
+		u64 d;
+
+		d = (r * rate);
+		(void)do_div(d, src_rate);
+		if (d < 6)
+			d = 6;
+		else if (d > 255)
+			d = 255;
+		d *= src_rate;
+		if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
+			((r * MAX_PLL_VCO_RATE) < (2 * d)))
+			continue;
+		(void)do_div(d, r);
+		if (rate < d) {
+			if (rounded_rate == 0)
+				rounded_rate = (long)d;
+			break;
+		}
+		if ((rate - d) < rem) {
+			rem = (rate - d);
+			rounded_rate = (long)d;
+		}
+	}
+	return rounded_rate;
+}
+
+static long round_dsiclk_rate(unsigned long rate)
+{
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+		PLL_RAW);
+	div = clock_divider(src_rate, rate);
+	rounded_rate = (src_rate / ((div > 2) ? 4 : div));
+
+	return rounded_rate;
+}
+
+static long round_dsiescclk_rate(unsigned long rate)
+{
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	src_rate = clock_rate(PRCMU_TVCLK);
+	div = clock_divider(src_rate, rate);
+	rounded_rate = (src_rate / min(div, (u32)255));
+
+	return rounded_rate;
+}
+
+long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		return round_clock_rate(clock, rate);
+	else if (clock == PRCMU_PLLDSI)
+		return round_plldsi_rate(rate);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return round_dsiclk_rate(rate);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return round_dsiescclk_rate(rate);
+	else
+		return (long)prcmu_clock_rate(clock);
+}
+
+static void set_clock_rate(u8 clock, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+	unsigned long src_rate;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	val = readl(clk_mgt[clock].reg);
+	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+		clk_mgt[clock].branch);
+	div = clock_divider(src_rate, rate);
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div) {
+			if (div > 1)
+				val |= PRCM_CLK_MGT_CLK38DIV;
+			else
+				val &= ~PRCM_CLK_MGT_CLK38DIV;
+		}
+	} else if (clock == PRCMU_SGACLK) {
+		val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
+			PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
+		if (div == 3) {
+			u64 r = (src_rate * 10);
+
+			(void)do_div(r, 25);
+			if (r <= rate) {
+				val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
+				div = 0;
+			}
+		}
+		val |= min(div, (u32)31);
+	} else {
+		val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
+		val |= min(div, (u32)31);
+	}
+	writel(val, clk_mgt[clock].reg);
+
+	/* Release the HW semaphore. */
+	writel(0, PRCM_SEM);
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
+static int set_plldsi_rate(unsigned long rate)
+{
+	unsigned long src_rate;
+	unsigned long rem;
+	u32 pll_freq = 0;
+	u32 r;
+
+	src_rate = clock_rate(PRCMU_HDMICLK);
+	rem = rate;
+
+	for (r = 7; (rem > 0) && (r > 0); r--) {
+		u64 d;
+		u64 hwrate;
+
+		d = (r * rate);
+		(void)do_div(d, src_rate);
+		if (d < 6)
+			d = 6;
+		else if (d > 255)
+			d = 255;
+		hwrate = (d * src_rate);
+		if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
+			((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
+			continue;
+		(void)do_div(hwrate, r);
+		if (rate < hwrate) {
+			if (pll_freq == 0)
+				pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+					(r << PRCM_PLL_FREQ_R_SHIFT));
+			break;
+		}
+		if ((rate - hwrate) < rem) {
+			rem = (rate - hwrate);
+			pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+				(r << PRCM_PLL_FREQ_R_SHIFT));
+		}
 	}
+	if (pll_freq == 0)
+		return -EINVAL;
+
+	pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
+	writel(pll_freq, PRCM_PLLDSI_FREQ);
+
+	return 0;
+}
+
+static void set_dsiclk_rate(u8 n, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+
+	div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
+			clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
+
+	dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
+			   (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
+			   /* else */	PRCM_DSI_PLLOUT_SEL_PHI_4;
+
+	val = readl(PRCM_DSI_PLLOUT_SEL);
+	val &= ~dsiclk[n].divsel_mask;
+	val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
+	writel(val, PRCM_DSI_PLLOUT_SEL);
+}
+
+static void set_dsiescclk_rate(u8 n, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+
+	div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
+	val = readl(PRCM_DSITVCLK_DIV);
+	val &= ~dsiescclk[n].div_mask;
+	val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
+	writel(val, PRCM_DSITVCLK_DIV);
+}
+
+int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
 	if (clock < PRCMU_NUM_REG_CLOCKS)
-		return request_reg_clock(clock, enable);
-	return -EINVAL;
+		set_clock_rate(clock, rate);
+	else if (clock == PRCMU_PLLDSI)
+		return set_plldsi_rate(rate);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
+	return 0;
 }
 
 int db8500_prcmu_config_esram0_deep_sleep(u8 state)
@@ -1476,7 +2021,7 @@ int db8500_prcmu_config_esram0_deep_sleep(u8 state)
 	return 0;
 }
 
-int prcmu_config_hotdog(u8 threshold)
+int db8500_prcmu_config_hotdog(u8 threshold)
 {
 	mutex_lock(&mb4_transfer.lock);
 
@@ -1494,7 +2039,7 @@ int prcmu_config_hotdog(u8 threshold)
 	return 0;
 }
 
-int prcmu_config_hotmon(u8 low, u8 high)
+int db8500_prcmu_config_hotmon(u8 low, u8 high)
 {
 	mutex_lock(&mb4_transfer.lock);
 
@@ -1533,7 +2078,7 @@ static int config_hot_period(u16 val)
 	return 0;
 }
 
-int prcmu_start_temp_sense(u16 cycles32k)
+int db8500_prcmu_start_temp_sense(u16 cycles32k)
 {
 	if (cycles32k == 0xFFFF)
 		return -EINVAL;
@@ -1541,7 +2086,7 @@ int prcmu_start_temp_sense(u16 cycles32k)
 	return config_hot_period(cycles32k);
 }
 
-int prcmu_stop_temp_sense(void)
+int db8500_prcmu_stop_temp_sense(void)
 {
 	return config_hot_period(0xFFFF);
 }
@@ -1570,7 +2115,7 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
 
 }
 
-int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 {
 	BUG_ON(num == 0 || num > 0xf);
 	return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
@@ -1578,17 +2123,17 @@ int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 			    A9WDOG_AUTO_OFF_DIS);
 }
 
-int prcmu_enable_a9wdog(u8 id)
+int db8500_prcmu_enable_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
 }
 
-int prcmu_disable_a9wdog(u8 id)
+int db8500_prcmu_disable_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
 }
 
-int prcmu_kick_a9wdog(u8 id)
+int db8500_prcmu_kick_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
 }
@@ -1596,16 +2141,8 @@ int prcmu_kick_a9wdog(u8 id)
 /*
  * timeout is 28 bit, in ms.
  */
-#define MAX_WATCHDOG_TIMEOUT 131000
-int prcmu_load_a9wdog(u8 id, u32 timeout)
+int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
 {
-	if (timeout > MAX_WATCHDOG_TIMEOUT)
-		/*
-		 * Due to calculation bug in prcmu fw, timeouts
-		 * can't be bigger than 131 seconds.
-		 */
-		return -EINVAL;
-
 	return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
 			    (id & A9WDOG_ID_MASK) |
 			    /*
@@ -1619,41 +2156,6 @@ int prcmu_load_a9wdog(u8 id, u32 timeout)
 }
 
 /**
- * prcmu_set_clock_divider() - Configure the clock divider.
- * @clock:	The clock for which the request is made.
- * @divider:	The clock divider. (< 32)
- *
- * This function should only be used by the clock implementation.
- * Do not use it from any other place!
- */
-int prcmu_set_clock_divider(u8 clock, u8 divider)
-{
-	u32 val;
-	unsigned long flags;
-
-	if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_mgt_lock, flags);
-
-	/* Grab the HW semaphore. */
-	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
-		cpu_relax();
-
-	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
-	val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
-	val |= (u32)divider;
-	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
-
-	/* Release the HW semaphore. */
-	writel(0, PRCM_SEM);
-
-	spin_unlock_irqrestore(&clk_mgt_lock, flags);
-
-	return 0;
-}
-
-/**
  * prcmu_abb_read() - Read register value(s) from the ABB.
  * @slave:	The I2C slave address.
  * @reg:	The (start) register address.
@@ -1675,6 +2177,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
+	writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
 	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
 	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
@@ -1700,16 +2203,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 }
 
 /**
- * prcmu_abb_write() - Write register value(s) to the ABB.
+ * prcmu_abb_write_masked() - Write masked register value(s) to the ABB.
  * @slave:	The I2C slave address.
  * @reg:	The (start) register address.
  * @value:	The value(s) to write.
+ * @mask:	The mask(s) to use.
  * @size:	The number of registers to write.
  *
- * Reads register value(s) from the ABB.
+ * Writes masked register value(s) to the ABB.
+ * For each @value, only the bits set to 1 in the corresponding @mask
+ * will be written. The other bits are not changed.
  * @size has to be 1 for the current firmware version.
  */
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size)
 {
 	int r;
 
@@ -1721,6 +2227,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
+	writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
 	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
 	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
@@ -1743,6 +2250,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 }
 
 /**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Writes register value(s) to the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	u8 mask = ~0;
+
+	return prcmu_abb_write_masked(slave, reg, value, &mask, size);
+}
+
+/**
  * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
  */
 void prcmu_ac_wake_req(void)
@@ -1850,9 +2374,9 @@ u16 db8500_prcmu_get_reset_code(void)
 }
 
 /**
- * prcmu_reset_modem - ask the PRCMU to reset modem
+ * db8500_prcmu_reset_modem - ask the PRCMU to reset modem
  */
-void prcmu_modem_reset(void)
+void db8500_prcmu_modem_reset(void)
 {
 	mutex_lock(&mb1_transfer.lock);
 
@@ -2099,6 +2623,26 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
+static char *fw_project_name(u8 project)
+{
+	switch (project) {
+	case PRCMU_FW_PROJECT_U8500:
+		return "U8500";
+	case PRCMU_FW_PROJECT_U8500_C2:
+		return "U8500 C2";
+	case PRCMU_FW_PROJECT_U9500:
+		return "U9500";
+	case PRCMU_FW_PROJECT_U9500_C2:
+		return "U9500 C2";
+	case PRCMU_FW_PROJECT_U8520:
+		return "U8520";
+	case PRCMU_FW_PROJECT_U8420:
+		return "U8420";
+	default:
+		return "Unknown";
+	}
+}
+
 void __init db8500_prcmu_early_init(void)
 {
 	unsigned int i;
@@ -2108,11 +2652,13 @@ void __init db8500_prcmu_early_init(void)
 		if (tcpm_base != NULL) {
 			u32 version;
 			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
-			prcmu_version.project_number = version & 0xFF;
-			prcmu_version.api_version = (version >> 8) & 0xFF;
-			prcmu_version.func_version = (version >> 16) & 0xFF;
-			prcmu_version.errata = (version >> 24) & 0xFF;
-			pr_info("PRCMU firmware version %d.%d.%d\n",
+			fw_info.version.project = version & 0xFF;
+			fw_info.version.api_version = (version >> 8) & 0xFF;
+			fw_info.version.func_version = (version >> 16) & 0xFF;
+			fw_info.version.errata = (version >> 24) & 0xFF;
+			fw_info.valid = true;
+			pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
+				fw_project_name(fw_info.version.project),
 				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
 				(version >> 24) & 0xFF);
 			iounmap(tcpm_base);
@@ -2130,6 +2676,7 @@ void __init db8500_prcmu_early_init(void)
 	init_completion(&mb0_transfer.ac_wake_work);
 	mutex_init(&mb1_transfer.lock);
 	init_completion(&mb1_transfer.work);
+	mb1_transfer.ape_opp = APE_NO_CHANGE;
 	mutex_init(&mb2_transfer.lock);
 	init_completion(&mb2_transfer.work);
 	spin_lock_init(&mb2_transfer.auto_pm_lock);
@@ -2154,7 +2701,7 @@ void __init db8500_prcmu_early_init(void)
 	}
 }
 
-static void __init db8500_prcmu_init_clkforce(void)
+static void __init init_prcm_registers(void)
 {
 	u32 val;
 
@@ -2186,19 +2733,17 @@ static struct regulator_consumer_supply db8500_vape_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "uart1"),
 	REGULATOR_SUPPLY("vcore", "uart2"),
 	REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
+	REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
 };
 
 static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
-	/* CG2900 and CW1200 power to off-chip peripherals */
-	REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"),
-	REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"),
 	REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
 	/* AV8100 regulator */
 	REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
 };
 
 static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
-	REGULATOR_SUPPLY("vsupply", "b2r2.0"),
+	REGULATOR_SUPPLY("vsupply", "b2r2_bus"),
 	REGULATOR_SUPPLY("vsupply", "mcde"),
 };
 
@@ -2235,6 +2780,7 @@ static struct regulator_consumer_supply db8500_esram12_consumers[] = {
 static struct regulator_consumer_supply db8500_esram34_consumers[] = {
 	REGULATOR_SUPPLY("v-esram34", "mcde"),
 	REGULATOR_SUPPLY("esram34", "cm_control"),
+	REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
 };
 
 static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -2291,7 +2837,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		},
 	},
 	[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
-		.supply_regulator = "db8500-vape",
+		/* dependency to u8500-vape is handled outside regulator framework */
 		.constraints = {
 			.name = "db8500-sva-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2307,7 +2853,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		},
 	},
 	[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
-		.supply_regulator = "db8500-vape",
+		/* dependency to u8500-vape is handled outside regulator framework */
 		.constraints = {
 			.name = "db8500-sva-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2316,7 +2862,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		.num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
-		.supply_regulator = "db8500-vape",
+		/* dependency to u8500-vape is handled outside regulator framework */
 		.constraints = {
 			.name = "db8500-sia-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2331,7 +2877,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		},
 	},
 	[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
-		.supply_regulator = "db8500-vape",
+		/* dependency to u8500-vape is handled outside regulator framework */
 		.constraints = {
 			.name = "db8500-sia-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2359,7 +2905,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		.num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM12] = {
-		.supply_regulator = "db8500-vape",
+		/*
+		 * esram12 is set in retention and supplied by Vsafe when Vape is off,
+		 * no need to hold Vape
+		 */
 		.constraints = {
 			.name = "db8500-esram12",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2374,7 +2923,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 		},
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM34] = {
-		.supply_regulator = "db8500-vape",
+		/*
+		 * esram34 is set in retention and supplied by Vsafe when Vape is off,
+		 * no need to hold Vape
+		 */
 		.constraints = {
 			.name = "db8500-esram34",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2412,7 +2964,7 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev)
 	if (ux500_is_svp())
 		return -ENODEV;
 
-	db8500_prcmu_init_clkforce();
+	init_prcm_registers();
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
 	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index ec22e9f..3a0bf91 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -17,41 +17,41 @@
 
 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
 
-#define PRCM_SVACLK_MGT_OFF		0x008
-#define PRCM_SIACLK_MGT_OFF		0x00C
-#define PRCM_SGACLK_MGT_OFF		0x014
-#define PRCM_UARTCLK_MGT_OFF		0x018
-#define PRCM_MSP02CLK_MGT_OFF		0x01C
-#define PRCM_I2CCLK_MGT_OFF		0x020
-#define PRCM_SDMMCCLK_MGT_OFF		0x024
-#define PRCM_SLIMCLK_MGT_OFF		0x028
-#define PRCM_PER1CLK_MGT_OFF		0x02C
-#define PRCM_PER2CLK_MGT_OFF		0x030
-#define PRCM_PER3CLK_MGT_OFF		0x034
-#define PRCM_PER5CLK_MGT_OFF		0x038
-#define PRCM_PER6CLK_MGT_OFF		0x03C
-#define PRCM_PER7CLK_MGT_OFF		0x040
-#define PRCM_PWMCLK_MGT_OFF		0x044 /* for DB5500 */
-#define PRCM_IRDACLK_MGT_OFF		0x048 /* for DB5500 */
-#define PRCM_IRRCCLK_MGT_OFF		0x04C /* for DB5500 */
-#define PRCM_LCDCLK_MGT_OFF		0x044
-#define PRCM_BMLCLK_MGT_OFF		0x04C
-#define PRCM_HSITXCLK_MGT_OFF		0x050
-#define PRCM_HSIRXCLK_MGT_OFF		0x054
-#define PRCM_HDMICLK_MGT_OFF		0x058
-#define PRCM_APEATCLK_MGT_OFF		0x05C
-#define PRCM_APETRACECLK_MGT_OFF	0x060
-#define PRCM_MCDECLK_MGT_OFF		0x064
-#define PRCM_IPI2CCLK_MGT_OFF		0x068
-#define PRCM_DSIALTCLK_MGT_OFF		0x06C
-#define PRCM_DMACLK_MGT_OFF		0x074
-#define PRCM_B2R2CLK_MGT_OFF		0x078
-#define PRCM_TVCLK_MGT_OFF		0x07C
-#define PRCM_UNIPROCLK_MGT_OFF		0x278
-#define PRCM_SSPCLK_MGT_OFF		0x280
-#define PRCM_RNGCLK_MGT_OFF		0x284
-#define PRCM_UICCCLK_MGT_OFF		0x27C
-#define PRCM_MSP1CLK_MGT_OFF		0x288
+#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \
+	+ _offset)
+#define PRCM_ACLK_MGT		PRCM_CLK_MGT(0x004)
+#define PRCM_SVACLK_MGT		PRCM_CLK_MGT(0x008)
+#define PRCM_SIACLK_MGT		PRCM_CLK_MGT(0x00C)
+#define PRCM_SGACLK_MGT		PRCM_CLK_MGT(0x014)
+#define PRCM_UARTCLK_MGT	PRCM_CLK_MGT(0x018)
+#define PRCM_MSP02CLK_MGT	PRCM_CLK_MGT(0x01C)
+#define PRCM_I2CCLK_MGT		PRCM_CLK_MGT(0x020)
+#define PRCM_SDMMCCLK_MGT	PRCM_CLK_MGT(0x024)
+#define PRCM_SLIMCLK_MGT	PRCM_CLK_MGT(0x028)
+#define PRCM_PER1CLK_MGT	PRCM_CLK_MGT(0x02C)
+#define PRCM_PER2CLK_MGT	PRCM_CLK_MGT(0x030)
+#define PRCM_PER3CLK_MGT	PRCM_CLK_MGT(0x034)
+#define PRCM_PER5CLK_MGT	PRCM_CLK_MGT(0x038)
+#define PRCM_PER6CLK_MGT	PRCM_CLK_MGT(0x03C)
+#define PRCM_PER7CLK_MGT	PRCM_CLK_MGT(0x040)
+#define PRCM_LCDCLK_MGT		PRCM_CLK_MGT(0x044)
+#define PRCM_BMLCLK_MGT		PRCM_CLK_MGT(0x04C)
+#define PRCM_HSITXCLK_MGT	PRCM_CLK_MGT(0x050)
+#define PRCM_HSIRXCLK_MGT	PRCM_CLK_MGT(0x054)
+#define PRCM_HDMICLK_MGT	PRCM_CLK_MGT(0x058)
+#define PRCM_APEATCLK_MGT	PRCM_CLK_MGT(0x05C)
+#define PRCM_APETRACECLK_MGT	PRCM_CLK_MGT(0x060)
+#define PRCM_MCDECLK_MGT	PRCM_CLK_MGT(0x064)
+#define PRCM_IPI2CCLK_MGT	PRCM_CLK_MGT(0x068)
+#define PRCM_DSIALTCLK_MGT	PRCM_CLK_MGT(0x06C)
+#define PRCM_DMACLK_MGT		PRCM_CLK_MGT(0x074)
+#define PRCM_B2R2CLK_MGT	PRCM_CLK_MGT(0x078)
+#define PRCM_TVCLK_MGT		PRCM_CLK_MGT(0x07C)
+#define PRCM_UNIPROCLK_MGT	PRCM_CLK_MGT(0x278)
+#define PRCM_SSPCLK_MGT		PRCM_CLK_MGT(0x280)
+#define PRCM_RNGCLK_MGT		PRCM_CLK_MGT(0x284)
+#define PRCM_UICCCLK_MGT	PRCM_CLK_MGT(0x27C)
+#define PRCM_MSP1CLK_MGT	PRCM_CLK_MGT(0x288)
 
 #define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
 #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
@@ -79,6 +79,8 @@
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCM_ARM_WFI_STANDBY_WFI0               0x08
+#define PRCM_ARM_WFI_STANDBY_WFI1               0x10
 #define PRCM_IOCR		(_PRCMU_BASE + 0x310)
 #define PRCM_IOCR_IOFORCE			0x1
 
@@ -131,20 +133,58 @@
 #define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
 #define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
 
+#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP		BIT(11)
+#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI	BIT(22)
+
 /* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLSOC0_FREQ	   (_PRCMU_BASE + 0x080)
+#define PRCM_PLLSOC1_FREQ	   (_PRCMU_BASE + 0x084)
+#define PRCM_PLLDDR_FREQ	   (_PRCMU_BASE + 0x08C)
+#define PRCM_PLL_FREQ_D_SHIFT	0
+#define PRCM_PLL_FREQ_D_MASK	BITS(0, 7)
+#define PRCM_PLL_FREQ_N_SHIFT	8
+#define PRCM_PLL_FREQ_N_MASK	BITS(8, 13)
+#define PRCM_PLL_FREQ_R_SHIFT	16
+#define PRCM_PLL_FREQ_R_MASK	BITS(16, 18)
+#define PRCM_PLL_FREQ_SELDIV2	BIT(24)
+#define PRCM_PLL_FREQ_DIV2EN	BIT(25)
+
 #define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
 #define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
 #define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
 #define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
 #define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
 #define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
 #define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
 
+#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0)
+
+#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10	BIT(0)
+#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3	BIT(1)
+
+#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT	0
+#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK	BITS(0, 2)
+#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT	8
+#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK	BITS(8, 10)
+
+#define PRCM_DSI_PLLOUT_SEL_OFF		0
+#define PRCM_DSI_PLLOUT_SEL_PHI		1
+#define PRCM_DSI_PLLOUT_SEL_PHI_2	2
+#define PRCM_DSI_PLLOUT_SEL_PHI_4	3
+
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT	0
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK		BITS(0, 7)
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT	8
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK		BITS(8, 15)
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT	16
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK		BITS(16, 23)
+#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN		BIT(24)
+#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN		BIT(25)
+#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN		BIT(26)
+
+#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14)
+
 #define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
 #define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
 #define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
@@ -183,9 +223,15 @@
 #define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
 #define PRCM_CLKOCR_CLK1TYPE		BIT(28)
 
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN		BIT(8)
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK		BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_SOC0		BIT(5)
+#define PRCM_CLK_MGT_CLKPLLSW_SOC1		BIT(6)
+#define PRCM_CLK_MGT_CLKPLLSW_DDR		BIT(7)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK		BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN			BIT(8)
+#define PRCM_CLK_MGT_CLK38			BIT(9)
+#define PRCM_CLK_MGT_CLK38DIV			BIT(11)
+#define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN	BIT(12)
 
 /* GPIOCR register */
 #define PRCM_GPIOCR_SPI2_SELECT BIT(23)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7122386..9fd4f63 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -560,6 +560,8 @@ EXPORT_SYMBOL(mc13xxx_get_flags);
 
 #define MC13XXX_ADC1_CHAN0_SHIFT	5
 #define MC13XXX_ADC1_CHAN1_SHIFT	8
+#define MC13783_ADC1_ATO_SHIFT		11
+#define MC13783_ADC1_ATOX		(1 << 19)
 
 struct mc13xxx_adcdone_data {
 	struct mc13xxx *mc13xxx;
@@ -580,7 +582,8 @@ static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
 #define MC13XXX_ADC_WORKING (1 << 0)
 
 int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
-		unsigned int channel, unsigned int *sample)
+		unsigned int channel, u8 ato, bool atox,
+		unsigned int *sample)
 {
 	u32 adc0, adc1, old_adc0;
 	int i, ret;
@@ -631,6 +634,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		return -EINVAL;
 	}
 
+	adc1 |= ato << MC13783_ADC1_ATO_SHIFT;
+	if (atox)
+		adc1 |= MC13783_ADC1_ATOX;
 	dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
 	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
 			mc13xxx_handler_adcdone, __func__, &adcdone_data);
@@ -813,7 +819,8 @@ err_revision:
 		mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
 
 	if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
-		mc13xxx_add_subdevice(mc13xxx, "%s-ts");
+		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
+				&pdata->touch, sizeof(pdata->touch));
 
 	if (pdata) {
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 411f523..ffc3d48 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -162,7 +162,7 @@ int mfd_add_devices(struct device *parent, int id,
 	atomic_t *cnts;
 
 	/* initialize reference counting for all cells */
-	cnts = kcalloc(sizeof(*cnts), n_devs, GFP_KERNEL);
+	cnts = kcalloc(n_devs, sizeof(*cnts), GFP_KERNEL);
 	if (!cnts)
 		return -ENOMEM;
 
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 68ac2c5..95a2e54 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -170,7 +170,7 @@ struct usbhs_hcd_omap {
 /*-------------------------------------------------------------------------*/
 
 const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
-static u64 usbhs_dmamask = ~(u32)0;
+static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 
 /*-------------------------------------------------------------------------*/
 
@@ -223,7 +223,7 @@ static struct platform_device *omap_usbhs_alloc_child(const char *name,
 	}
 
 	child->dev.dma_mask		= &usbhs_dmamask;
-	child->dev.coherent_dma_mask	= 0xffffffff;
+	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
 	child->dev.parent		= dev;
 
 	ret = platform_device_add(child);
@@ -799,14 +799,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, omap);
 
+	omap_usbhs_init(dev);
 	ret = omap_usbhs_alloc_children(pdev);
 	if (ret) {
 		dev_err(dev, "omap_usbhs_alloc_children failed\n");
 		goto err_alloc;
 	}
 
-	omap_usbhs_init(dev);
-
 	goto end_probe;
 
 err_alloc:
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index ff1a7e7..189c2f0 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -46,13 +46,7 @@ EXPORT_SYMBOL_GPL(pcf50633_read_block);
 int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
 					int nr_regs, u8 *data)
 {
-	int ret;
-
-	ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
-	if (ret != 0)
-		return ret;
-
-	return nr_regs;
+	return regmap_raw_write(pcf->regmap, reg, data, nr_regs);
 }
 EXPORT_SYMBOL_GPL(pcf50633_write_block);
 
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
index 9ab19a8..d02ddf2 100644
--- a/drivers/mfd/pcf50633-gpio.c
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -19,32 +19,7 @@
 
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/gpio.h>
-
-enum pcf50633_regulator_id {
-	PCF50633_REGULATOR_AUTO,
-	PCF50633_REGULATOR_DOWN1,
-	PCF50633_REGULATOR_DOWN2,
-	PCF50633_REGULATOR_LDO1,
-	PCF50633_REGULATOR_LDO2,
-	PCF50633_REGULATOR_LDO3,
-	PCF50633_REGULATOR_LDO4,
-	PCF50633_REGULATOR_LDO5,
-	PCF50633_REGULATOR_LDO6,
-	PCF50633_REGULATOR_HCLDO,
-	PCF50633_REGULATOR_MEMLDO,
-};
-
-#define PCF50633_REG_AUTOOUT	0x1a
-#define PCF50633_REG_DOWN1OUT	0x1e
-#define PCF50633_REG_DOWN2OUT	0x22
-#define PCF50633_REG_MEMLDOOUT	0x26
-#define PCF50633_REG_LDO1OUT	0x2d
-#define PCF50633_REG_LDO2OUT	0x2f
-#define PCF50633_REG_LDO3OUT	0x31
-#define PCF50633_REG_LDO4OUT	0x33
-#define PCF50633_REG_LDO5OUT	0x35
-#define PCF50633_REG_LDO6OUT	0x37
-#define PCF50633_REG_HCLDOOUT	0x39
+#include <linux/mfd/pcf50633/pmic.h>
 
 static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
 	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
index 048a3b9..498286c 100644
--- a/drivers/mfd/pcf50633-irq.c
+++ b/drivers/mfd/pcf50633-irq.c
@@ -19,12 +19,7 @@
 #include <linux/slab.h>
 
 #include <linux/mfd/pcf50633/core.h>
-
-/* Two MBCS registers used during cold start */
-#define PCF50633_REG_MBCS1		0x4b
-#define PCF50633_REG_MBCS2		0x4c
-#define PCF50633_MBCS1_USBPRES 		0x01
-#define PCF50633_MBCS1_ADAPTPRES	0x01
+#include <linux/mfd/pcf50633/mbc.h>
 
 int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
 			void (*handler) (int, void *), void *data)
diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c
new file mode 100644
index 0000000..fa6f80f
--- /dev/null
+++ b/drivers/mfd/rc5t583-irq.c
@@ -0,0 +1,408 @@
+/*
+ * Interrupt driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mfd/rc5t583.h>
+
+enum int_type {
+	SYS_INT  = 0x1,
+	DCDC_INT = 0x2,
+	RTC_INT  = 0x4,
+	ADC_INT  = 0x8,
+	GPIO_INT = 0x10,
+};
+
+static int gpedge_add[] = {
+	RC5T583_GPIO_GPEDGE2,
+	RC5T583_GPIO_GPEDGE2
+};
+
+static int irq_en_add[] = {
+	RC5T583_INT_EN_SYS1,
+	RC5T583_INT_EN_SYS2,
+	RC5T583_INT_EN_DCDC,
+	RC5T583_INT_EN_RTC,
+	RC5T583_INT_EN_ADC1,
+	RC5T583_INT_EN_ADC2,
+	RC5T583_INT_EN_ADC3,
+	RC5T583_GPIO_EN_INT
+};
+
+static int irq_mon_add[] = {
+	RC5T583_INT_MON_SYS1,
+	RC5T583_INT_MON_SYS2,
+	RC5T583_INT_MON_DCDC,
+	RC5T583_INT_MON_RTC,
+	RC5T583_INT_IR_ADCL,
+	RC5T583_INT_IR_ADCH,
+	RC5T583_INT_IR_ADCEND,
+	RC5T583_INT_IR_GPIOF,
+	RC5T583_INT_IR_GPIOR
+};
+
+static int irq_clr_add[] = {
+	RC5T583_INT_IR_SYS1,
+	RC5T583_INT_IR_SYS2,
+	RC5T583_INT_IR_DCDC,
+	RC5T583_INT_IR_RTC,
+	RC5T583_INT_IR_ADCL,
+	RC5T583_INT_IR_ADCH,
+	RC5T583_INT_IR_ADCEND,
+	RC5T583_INT_IR_GPIOF,
+	RC5T583_INT_IR_GPIOR
+};
+
+static int main_int_type[] = {
+	SYS_INT,
+	SYS_INT,
+	DCDC_INT,
+	RTC_INT,
+	ADC_INT,
+	ADC_INT,
+	ADC_INT,
+	GPIO_INT,
+	GPIO_INT,
+};
+
+struct rc5t583_irq_data {
+	u8	int_type;
+	u8	master_bit;
+	u8	int_en_bit;
+	u8	mask_reg_index;
+	int	grp_index;
+};
+
+#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \
+			_int_bit, _mask_ind)		\
+	{						\
+		.int_type	= _int_type,		\
+		.master_bit	= _master_bit,		\
+		.grp_index	= _grp_index,		\
+		.int_en_bit	= _int_bit,		\
+		.mask_reg_index	= _mask_ind,		\
+	}
+
+static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = {
+	[RC5T583_IRQ_ONKEY]		= RC5T583_IRQ(SYS_INT,  0, 0, 0, 0),
+	[RC5T583_IRQ_ACOK]		= RC5T583_IRQ(SYS_INT,  0, 1, 1, 0),
+	[RC5T583_IRQ_LIDOPEN]		= RC5T583_IRQ(SYS_INT,  0, 2, 2, 0),
+	[RC5T583_IRQ_PREOT]		= RC5T583_IRQ(SYS_INT,  0, 3, 3, 0),
+	[RC5T583_IRQ_CLKSTP]		= RC5T583_IRQ(SYS_INT,  0, 4, 4, 0),
+	[RC5T583_IRQ_ONKEY_OFF]		= RC5T583_IRQ(SYS_INT,  0, 5, 5, 0),
+	[RC5T583_IRQ_WD]		= RC5T583_IRQ(SYS_INT,  0, 7, 7, 0),
+	[RC5T583_IRQ_EN_PWRREQ1]	= RC5T583_IRQ(SYS_INT,  0, 8, 0, 1),
+	[RC5T583_IRQ_EN_PWRREQ2]	= RC5T583_IRQ(SYS_INT,  0, 9, 1, 1),
+	[RC5T583_IRQ_PRE_VINDET]	= RC5T583_IRQ(SYS_INT,  0, 10, 2, 1),
+
+	[RC5T583_IRQ_DC0LIM]		= RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2),
+	[RC5T583_IRQ_DC1LIM]		= RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2),
+	[RC5T583_IRQ_DC2LIM]		= RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2),
+	[RC5T583_IRQ_DC3LIM]		= RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2),
+
+	[RC5T583_IRQ_CTC]		= RC5T583_IRQ(RTC_INT,  2, 0, 0, 3),
+	[RC5T583_IRQ_YALE]		= RC5T583_IRQ(RTC_INT,  2, 5, 5, 3),
+	[RC5T583_IRQ_DALE]		= RC5T583_IRQ(RTC_INT,  2, 6, 6, 3),
+	[RC5T583_IRQ_WALE]		= RC5T583_IRQ(RTC_INT,  2, 7, 7, 3),
+
+	[RC5T583_IRQ_AIN1L]		= RC5T583_IRQ(ADC_INT,  3, 0, 0, 4),
+	[RC5T583_IRQ_AIN2L]		= RC5T583_IRQ(ADC_INT,  3, 1, 1, 4),
+	[RC5T583_IRQ_AIN3L]		= RC5T583_IRQ(ADC_INT,  3, 2, 2, 4),
+	[RC5T583_IRQ_VBATL]		= RC5T583_IRQ(ADC_INT,  3, 3, 3, 4),
+	[RC5T583_IRQ_VIN3L]		= RC5T583_IRQ(ADC_INT,  3, 4, 4, 4),
+	[RC5T583_IRQ_VIN8L]		= RC5T583_IRQ(ADC_INT,  3, 5, 5, 4),
+	[RC5T583_IRQ_AIN1H]		= RC5T583_IRQ(ADC_INT,  3, 6, 0, 5),
+	[RC5T583_IRQ_AIN2H]		= RC5T583_IRQ(ADC_INT,  3, 7, 1, 5),
+	[RC5T583_IRQ_AIN3H]		= RC5T583_IRQ(ADC_INT,  3, 8, 2, 5),
+	[RC5T583_IRQ_VBATH]		= RC5T583_IRQ(ADC_INT,  3, 9, 3, 5),
+	[RC5T583_IRQ_VIN3H]		= RC5T583_IRQ(ADC_INT,  3, 10, 4, 5),
+	[RC5T583_IRQ_VIN8H]		= RC5T583_IRQ(ADC_INT,  3, 11, 5, 5),
+	[RC5T583_IRQ_ADCEND]		= RC5T583_IRQ(ADC_INT,  3, 12, 0, 6),
+
+	[RC5T583_IRQ_GPIO0]		= RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7),
+	[RC5T583_IRQ_GPIO1]		= RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7),
+	[RC5T583_IRQ_GPIO2]		= RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7),
+	[RC5T583_IRQ_GPIO3]		= RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7),
+	[RC5T583_IRQ_GPIO4]		= RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7),
+	[RC5T583_IRQ_GPIO5]		= RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7),
+	[RC5T583_IRQ_GPIO6]		= RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7),
+	[RC5T583_IRQ_GPIO7]		= RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7),
+};
+
+static void rc5t583_irq_lock(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	mutex_lock(&rc5t583->irq_lock);
+}
+
+static void rc5t583_irq_unmask(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+	rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index;
+	rc5t583->intc_inten_reg |= 1 << data->master_bit;
+	rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit;
+}
+
+static void rc5t583_irq_mask(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+	rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index);
+	if (!rc5t583->group_irq_en[data->grp_index])
+		rc5t583->intc_inten_reg &= ~(1 << data->master_bit);
+
+	rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit);
+}
+
+static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+	int val = 0;
+	int gpedge_index;
+	int gpedge_bit_pos;
+
+	/* Supporting only trigger level inetrrupt */
+	if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) {
+		gpedge_index = data->int_en_bit / 4;
+		gpedge_bit_pos = data->int_en_bit % 4;
+
+		if (type & IRQ_TYPE_EDGE_FALLING)
+			val |= 0x2;
+
+		if (type & IRQ_TYPE_EDGE_RISING)
+			val |= 0x1;
+
+		rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos);
+		rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos);
+		rc5t583_irq_unmask(irq_data);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void rc5t583_irq_sync_unlock(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) {
+		ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+				rc5t583->gpedge_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				gpedge_add[i], ret);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) {
+		ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+					rc5t583->irq_en_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_en_add[i], ret);
+	}
+
+	ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN,
+				rc5t583->intc_inten_reg);
+	if (ret < 0)
+		dev_warn(rc5t583->dev,
+			"Error in writing reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTEN, ret);
+
+	mutex_unlock(&rc5t583->irq_lock);
+}
+#ifdef CONFIG_PM_SLEEP
+static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	return irq_set_irq_wake(rc5t583->chip_irq, on);
+}
+#else
+#define rc5t583_irq_set_wake NULL
+#endif
+
+static irqreturn_t rc5t583_irq(int irq, void *data)
+{
+	struct rc5t583 *rc5t583 = data;
+	uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS];
+	uint8_t master_int;
+	int i;
+	int ret;
+	unsigned int rtc_int_sts = 0;
+
+	/* Clear the status */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)
+		int_sts[i] = 0;
+
+	ret  = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int);
+	if (ret < 0) {
+		dev_err(rc5t583->dev,
+			"Error in reading reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTMON, ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) {
+		if (!(master_int & main_int_type[i]))
+			continue;
+
+		ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]);
+		if (ret < 0) {
+			dev_warn(rc5t583->dev,
+				"Error in reading reg 0x%02x error: %d\n",
+				irq_mon_add[i], ret);
+			int_sts[i] = 0;
+			continue;
+		}
+
+		if (main_int_type[i] & RTC_INT) {
+			rtc_int_sts = 0;
+			if (int_sts[i] & 0x1)
+				rtc_int_sts |= BIT(6);
+			if (int_sts[i] & 0x2)
+				rtc_int_sts |= BIT(7);
+			if (int_sts[i] & 0x4)
+				rtc_int_sts |= BIT(0);
+			if (int_sts[i] & 0x8)
+				rtc_int_sts |= BIT(5);
+		}
+
+		ret = rc5t583_write(rc5t583->dev, irq_clr_add[i],
+				~int_sts[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in reading reg 0x%02x error: %d\n",
+				irq_clr_add[i], ret);
+
+		if (main_int_type[i] & RTC_INT)
+			int_sts[i] = rtc_int_sts;
+	}
+
+	/* Merge gpio interrupts for rising and falling case*/
+	int_sts[7] |= int_sts[8];
+
+	/* Call interrupt handler if enabled */
+	for (i = 0; i < RC5T583_MAX_IRQS; ++i) {
+		const struct rc5t583_irq_data *data = &rc5t583_irqs[i];
+		if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) &&
+			(rc5t583->group_irq_en[data->master_bit] &
+					(1 << data->grp_index)))
+			handle_nested_irq(rc5t583->irq_base + i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irq_chip rc5t583_irq_chip = {
+	.name = "rc5t583-irq",
+	.irq_mask = rc5t583_irq_mask,
+	.irq_unmask = rc5t583_irq_unmask,
+	.irq_bus_lock = rc5t583_irq_lock,
+	.irq_bus_sync_unlock = rc5t583_irq_sync_unlock,
+	.irq_set_type = rc5t583_irq_set_type,
+	.irq_set_wake = rc5t583_irq_set_wake,
+};
+
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base)
+{
+	int i, ret;
+
+	if (!irq_base) {
+		dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&rc5t583->irq_lock);
+
+	/* Initailize all int register to 0 */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)  {
+		ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+				rc5t583->irq_en_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_en_add[i], ret);
+	}
+
+	for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++)  {
+		ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+				rc5t583->gpedge_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				gpedge_add[i], ret);
+	}
+
+	ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0);
+	if (ret < 0)
+		dev_warn(rc5t583->dev,
+			"Error in writing reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTEN, ret);
+
+	/* Clear all interrupts in case they woke up active. */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)  {
+		ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_clr_add[i], ret);
+	}
+
+	rc5t583->irq_base = irq_base;
+	rc5t583->chip_irq = irq;
+
+	for (i = 0; i < RC5T583_MAX_IRQS; i++) {
+		int __irq = i + rc5t583->irq_base;
+		irq_set_chip_data(__irq, rc5t583);
+		irq_set_chip_and_handler(__irq, &rc5t583_irq_chip,
+					 handle_simple_irq);
+		irq_set_nested_thread(__irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(__irq, IRQF_VALID);
+#endif
+	}
+
+	ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT,
+				"rc5t583", rc5t583);
+	if (ret < 0)
+		dev_err(rc5t583->dev,
+			"Error in registering interrupt error: %d\n", ret);
+	return ret;
+}
+
+int rc5t583_irq_exit(struct rc5t583 *rc5t583)
+{
+	if (rc5t583->chip_irq)
+		free_irq(rc5t583->chip_irq, rc5t583);
+	return 0;
+}
diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c
new file mode 100644
index 0000000..99ef944
--- /dev/null
+++ b/drivers/mfd/rc5t583.c
@@ -0,0 +1,386 @@
+/*
+ * Core driver access RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *	Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rc5t583.h>
+#include <linux/regmap.h>
+
+#define RICOH_ONOFFSEL_REG	0x10
+#define RICOH_SWCTL_REG		0x5E
+
+struct deepsleep_control_data {
+	u8 reg_add;
+	u8 ds_pos_bit;
+};
+
+#define DEEPSLEEP_INIT(_id, _reg, _pos)		\
+	{					\
+		.reg_add = RC5T583_##_reg,	\
+		.ds_pos_bit = _pos,		\
+	}
+
+static struct deepsleep_control_data deepsleep_data[] = {
+	DEEPSLEEP_INIT(DC0, SLPSEQ1, 0),
+	DEEPSLEEP_INIT(DC1, SLPSEQ1, 4),
+	DEEPSLEEP_INIT(DC2, SLPSEQ2, 0),
+	DEEPSLEEP_INIT(DC3, SLPSEQ2, 4),
+	DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0),
+	DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4),
+	DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0),
+	DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4),
+	DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0),
+	DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4),
+	DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0),
+	DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4),
+	DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0),
+	DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4),
+	DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0),
+	DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4),
+	DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0),
+	DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4),
+	DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0),
+	DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4),
+	DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0),
+	DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4),
+};
+
+#define EXT_PWR_REQ		\
+	(RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
+
+static struct mfd_cell rc5t583_subdevs[] = {
+	{.name = "rc5t583-regulator",},
+	{.name = "rc5t583-rtc",      },
+	{.name = "rc5t583-key",      }
+};
+
+int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_write(rc5t583->regmap, reg, val);
+}
+
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	unsigned int ival;
+	int ret;
+	ret = regmap_read(rc5t583->regmap, reg, &ival);
+	if (!ret)
+		*val = (uint8_t)ival;
+	return ret;
+}
+
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
+static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
+	int id, int ext_pwr, int slots)
+{
+	int ret;
+	uint8_t sleepseq_val;
+	unsigned int en_bit;
+	unsigned int slot_bit;
+
+	if (id == RC5T583_DS_DC0) {
+		dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id);
+		return -EINVAL;
+	}
+
+	en_bit = deepsleep_data[id].ds_pos_bit;
+	slot_bit = en_bit + 1;
+	ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val);
+	if (ret < 0) {
+		dev_err(dev, "Error in reading reg 0x%x\n",
+				deepsleep_data[id].reg_add);
+		return ret;
+	}
+
+	sleepseq_val &= ~(0xF << en_bit);
+	sleepseq_val |= BIT(en_bit);
+	sleepseq_val |= ((slots & 0x7) << slot_bit);
+	ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1));
+	if (ret < 0) {
+		dev_err(dev, "Error in updating the 0x%02x register\n",
+				RICOH_ONOFFSEL_REG);
+		return ret;
+	}
+
+	ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val);
+	if (ret < 0) {
+		dev_err(dev, "Error in writing reg 0x%x\n",
+				deepsleep_data[id].reg_add);
+		return ret;
+	}
+
+	if (id == RC5T583_DS_LDO4) {
+		ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1);
+		if (ret < 0)
+			dev_err(dev, "Error in writing reg 0x%x\n",
+				RICOH_SWCTL_REG);
+	}
+	return ret;
+}
+
+static int __rc5t583_set_ext_pwrreq2_control(struct device *dev,
+	int id, int ext_pwr)
+{
+	int ret;
+
+	if (id != RC5T583_DS_DC0) {
+		dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id);
+		return -EINVAL;
+	}
+
+	ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2));
+	if (ret < 0)
+		dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n");
+	return ret;
+}
+
+int rc5t583_ext_power_req_config(struct device *dev, int ds_id,
+	int ext_pwr_req, int deepsleep_slot_nr)
+{
+	if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ)
+		return -EINVAL;
+
+	if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL)
+		return __rc5t583_set_ext_pwrreq1_control(dev, ds_id,
+				ext_pwr_req, deepsleep_slot_nr);
+
+	if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL)
+		return __rc5t583_set_ext_pwrreq2_control(dev,
+			ds_id, ext_pwr_req);
+	return 0;
+}
+
+static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
+	struct rc5t583_platform_data *pdata)
+{
+	int ret;
+	int i;
+	uint8_t on_off_val = 0;
+
+	/*  Clear ONOFFSEL register */
+	if (pdata->enable_shutdown)
+		on_off_val = 0x1;
+
+	ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val);
+	if (ret < 0)
+		dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
+					RICOH_ONOFFSEL_REG, ret);
+
+	ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0);
+	if (ret < 0)
+		dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
+					RICOH_SWCTL_REG, ret);
+
+	/* Clear sleep sequence register */
+	for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) {
+		ret = rc5t583_write(rc5t583->dev, i, 0x0);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				i, ret);
+	}
+	return 0;
+}
+
+static bool volatile_reg(struct device *dev, unsigned int reg)
+{
+	/* Enable caching in interrupt registers */
+	switch (reg) {
+	case RC5T583_INT_EN_SYS1:
+	case RC5T583_INT_EN_SYS2:
+	case RC5T583_INT_EN_DCDC:
+	case RC5T583_INT_EN_RTC:
+	case RC5T583_INT_EN_ADC1:
+	case RC5T583_INT_EN_ADC2:
+	case RC5T583_INT_EN_ADC3:
+	case RC5T583_GPIO_GPEDGE1:
+	case RC5T583_GPIO_GPEDGE2:
+	case RC5T583_GPIO_EN_INT:
+		return false;
+
+	case RC5T583_GPIO_MON_IOIN:
+		/* This is gpio input register */
+		return true;
+
+	default:
+		/* Enable caching in gpio registers */
+		if ((reg >= RC5T583_GPIO_IOSEL) &&
+				(reg <= RC5T583_GPIO_GPOFUNC))
+			return false;
+
+		/* Enable caching in sleep seq registers */
+		if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11))
+			return false;
+
+		/* Enable caching of regulator registers */
+		if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL))
+			return false;
+		if ((reg >= RC5T583_REG_LDOEN1) &&
+					(reg <= RC5T583_REG_LDO9DAC_DS))
+			return false;
+
+		break;
+	}
+
+	return true;
+}
+
+static const struct regmap_config rc5t583_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = volatile_reg,
+	.max_register = RC5T583_MAX_REGS,
+	.num_reg_defaults_raw = RC5T583_MAX_REGS,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct rc5t583 *rc5t583;
+	struct rc5t583_platform_data *pdata = i2c->dev.platform_data;
+	int ret;
+	bool irq_init_success = false;
+
+	if (!pdata) {
+		dev_err(&i2c->dev, "Err: Platform data not found\n");
+		return -EINVAL;
+	}
+
+	rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL);
+	if (!rc5t583) {
+		dev_err(&i2c->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	rc5t583->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, rc5t583);
+
+	rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config);
+	if (IS_ERR(rc5t583->regmap)) {
+		ret = PTR_ERR(rc5t583->regmap);
+		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = rc5t583_clear_ext_power_req(rc5t583, pdata);
+	if (ret < 0)
+		goto err_irq_init;
+
+	if (i2c->irq) {
+		ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
+		/* Still continue with waring if irq init fails */
+		if (ret)
+			dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
+		else
+			irq_init_success = true;
+	}
+
+	ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
+			ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
+	if (ret) {
+		dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
+		goto err_add_devs;
+	}
+
+	return 0;
+
+err_add_devs:
+	if (irq_init_success)
+		rc5t583_irq_exit(rc5t583);
+err_irq_init:
+	regmap_exit(rc5t583->regmap);
+	return ret;
+}
+
+static int  __devexit rc5t583_i2c_remove(struct i2c_client *i2c)
+{
+	struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(rc5t583->dev);
+	rc5t583_irq_exit(rc5t583);
+	regmap_exit(rc5t583->regmap);
+	return 0;
+}
+
+static const struct i2c_device_id rc5t583_i2c_id[] = {
+	{.name = "rc5t583", .driver_data = 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id);
+
+static struct i2c_driver rc5t583_i2c_driver = {
+	.driver = {
+		   .name = "rc5t583",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = rc5t583_i2c_probe,
+	.remove = __devexit_p(rc5t583_i2c_remove),
+	.id_table = rc5t583_i2c_id,
+};
+
+static int __init rc5t583_i2c_init(void)
+{
+	return i2c_add_driver(&rc5t583_i2c_driver);
+}
+subsys_initcall(rc5t583_i2c_init);
+
+static void __exit rc5t583_i2c_exit(void)
+{
+	i2c_del_driver(&rc5t583_i2c_driver);
+}
+
+module_exit(rc5t583_i2c_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c
index caadabe..48949d9 100644
--- a/drivers/mfd/s5m-core.c
+++ b/drivers/mfd/s5m-core.c
@@ -26,7 +26,27 @@
 #include <linux/mfd/s5m87xx/s5m-rtc.h>
 #include <linux/regmap.h>
 
-static struct mfd_cell s5m87xx_devs[] = {
+static struct mfd_cell s5m8751_devs[] = {
+	{
+		.name = "s5m8751-pmic",
+	}, {
+		.name = "s5m-charger",
+	}, {
+		.name = "s5m8751-codec",
+	},
+};
+
+static struct mfd_cell s5m8763_devs[] = {
+	{
+		.name = "s5m8763-pmic",
+	}, {
+		.name = "s5m-rtc",
+	}, {
+		.name = "s5m-charger",
+	},
+};
+
+static struct mfd_cell s5m8767_devs[] = {
 	{
 		.name = "s5m8767-pmic",
 	}, {
@@ -42,7 +62,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_read);
 
 int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf)
 {
-	return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);;
+	return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(s5m_bulk_read);
 
@@ -54,7 +74,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_write);
 
 int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf)
 {
-	return regmap_raw_write(s5m87xx->regmap, reg, buf, count * sizeof(u16));
+	return regmap_raw_write(s5m87xx->regmap, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(s5m_bulk_write);
 
@@ -74,10 +94,10 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 {
 	struct s5m_platform_data *pdata = i2c->dev.platform_data;
 	struct s5m87xx_dev *s5m87xx;
-	int ret = 0;
-	int error;
+	int ret;
 
-	s5m87xx = kzalloc(sizeof(struct s5m87xx_dev), GFP_KERNEL);
+	s5m87xx = devm_kzalloc(&i2c->dev, sizeof(struct s5m87xx_dev),
+				GFP_KERNEL);
 	if (s5m87xx == NULL)
 		return -ENOMEM;
 
@@ -96,9 +116,9 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 
 	s5m87xx->regmap = regmap_init_i2c(i2c, &s5m_regmap_config);
 	if (IS_ERR(s5m87xx->regmap)) {
-		error = PTR_ERR(s5m87xx->regmap);
+		ret = PTR_ERR(s5m87xx->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
-			error);
+			ret);
 		goto err;
 	}
 
@@ -112,9 +132,23 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 
 	pm_runtime_set_active(s5m87xx->dev);
 
-	ret = mfd_add_devices(s5m87xx->dev, -1,
-				s5m87xx_devs, ARRAY_SIZE(s5m87xx_devs),
-				NULL, 0);
+	switch (s5m87xx->device_type) {
+	case S5M8751X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8751_devs,
+					ARRAY_SIZE(s5m8751_devs), NULL, 0);
+		break;
+	case S5M8763X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8763_devs,
+					ARRAY_SIZE(s5m8763_devs), NULL, 0);
+		break;
+	case S5M8767X:
+		ret = mfd_add_devices(s5m87xx->dev, -1, s5m8767_devs,
+					ARRAY_SIZE(s5m8767_devs), NULL, 0);
+		break;
+	default:
+		/* If this happens the probe function is problem */
+		BUG();
+	}
 
 	if (ret < 0)
 		goto err;
@@ -126,7 +160,6 @@ err:
 	s5m_irq_exit(s5m87xx);
 	i2c_unregister_device(s5m87xx->rtc);
 	regmap_exit(s5m87xx->regmap);
-	kfree(s5m87xx);
 	return ret;
 }
 
@@ -138,7 +171,6 @@ static int s5m87xx_i2c_remove(struct i2c_client *i2c)
 	s5m_irq_exit(s5m87xx);
 	i2c_unregister_device(s5m87xx->rtc);
 	regmap_exit(s5m87xx->regmap);
-	kfree(s5m87xx);
 	return 0;
 }
 
diff --git a/drivers/mfd/s5m-irq.c b/drivers/mfd/s5m-irq.c
index de76dfb..0236676 100644
--- a/drivers/mfd/s5m-irq.c
+++ b/drivers/mfd/s5m-irq.c
@@ -342,7 +342,10 @@ int s5m_irq_resume(struct s5m87xx_dev *s5m87xx)
 			s5m8767_irq_thread(s5m87xx->irq_base, s5m87xx);
 			break;
 		default:
-			break;
+			dev_err(s5m87xx->dev,
+				"Unknown device type %d\n",
+				s5m87xx->device_type);
+			return -EINVAL;
 
 		}
 	}
@@ -444,7 +447,9 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx)
 		}
 		break;
 	default:
-		break;
+		dev_err(s5m87xx->dev,
+			"Unknown device type %d\n", s5m87xx->device_type);
+		return -EINVAL;
 	}
 
 	if (!s5m87xx->ono)
@@ -467,12 +472,15 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx)
 					IRQF_ONESHOT, "s5m87xx-ono", s5m87xx);
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 
-	if (ret)
+	if (ret) {
 		dev_err(s5m87xx->dev, "Failed to request IRQ %d: %d\n",
 			s5m87xx->ono, ret);
+		return ret;
+	}
 
 	return 0;
 }
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index f4d8611..d927dd4 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -387,14 +387,6 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
 
 EXPORT_SYMBOL_GPL(sm501_unit_power);
 
-
-/* Perform a rounded division. */
-static long sm501fb_round_div(long num, long denom)
-{
-        /* n / d + 1 / 2 = (2n + d) / 2d */
-        return (2 * num + denom) / (2 * denom);
-}
-
 /* clock value structure. */
 struct sm501_clock {
 	unsigned long mclk;
@@ -428,7 +420,7 @@ static int sm501_calc_clock(unsigned long freq,
 		/* try all 8 shift values.*/
 		for (shift = 0; shift < 8; shift++) {
 			/* Calculate difference to requested clock */
-			diff = sm501fb_round_div(mclk, divider << shift) - freq;
+			diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
 			if (diff < 0)
 				diff = -diff;
 
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index e07947e..2dd8d49 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = {
 	.num_resources	= ARRAY_SIZE(stmpe_gpio_resources),
 };
 
+static struct mfd_cell stmpe_gpio_cell_noirq = {
+	.name		= "stmpe-gpio",
+	/* gpio cell resources consist of an irq only so no resources here */
+};
+
 /*
  * Keypad (1601, 2401, 2403)
  */
@@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = {
 	},
 };
 
+static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
+	{
+		.cell	= &stmpe_gpio_cell_noirq,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
 			   bool enable)
 {
@@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = {
 	.enable		= stmpe801_enable,
 };
 
+static struct stmpe_variant_info stmpe801_noirq = {
+	.name		= "stmpe801",
+	.id_val		= STMPE801_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 8,
+	.regs		= stmpe801_regs,
+	.blocks		= stmpe801_blocks_noirq,
+	.num_blocks	= ARRAY_SIZE(stmpe801_blocks_noirq),
+	.enable		= stmpe801_enable,
+};
+
 /*
  * Touchscreen (STMPE811 or STMPE610)
  */
@@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = {
 	.enable_autosleep	= stmpe1601_autosleep, /* same as stmpe1601 */
 };
 
-static struct stmpe_variant_info *stmpe_variant_info[] = {
+static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE610]	= &stmpe610,
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
@@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = {
 	[STMPE2403]	= &stmpe2403,
 };
 
+/*
+ * These devices can be connected in a 'no-irq' configuration - the irq pin
+ * is not used and the device cannot interrupt the CPU. Here we only list
+ * devices which support this configuration - the driver will fail probing
+ * for any devices not listed here which are configured in this way.
+ */
+static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
+	[STMPE801]	= &stmpe801_noirq,
+};
+
 static irqreturn_t stmpe_irq(int irq, void *data)
 {
 	struct stmpe *stmpe = data;
@@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
 	unsigned int irq_trigger = stmpe->pdata->irq_trigger;
 	int autosleep_timeout = stmpe->pdata->autosleep_timeout;
 	struct stmpe_variant_info *variant = stmpe->variant;
-	u8 icr;
+	u8 icr = 0;
 	unsigned int id;
 	u8 data[2];
 	int ret;
@@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
 	if (ret)
 		return ret;
 
-	if (id == STMPE801_ID)
-		icr = STMPE801_REG_SYS_CTRL_INT_EN;
-	else
-		icr = STMPE_ICR_LSB_GIM;
-
-	/* STMPE801 doesn't support Edge interrupts */
-	if (id != STMPE801_ID) {
-		if (irq_trigger == IRQF_TRIGGER_FALLING ||
-				irq_trigger == IRQF_TRIGGER_RISING)
-			icr |= STMPE_ICR_LSB_EDGE;
-	}
-
-	if (irq_trigger == IRQF_TRIGGER_RISING ||
-			irq_trigger == IRQF_TRIGGER_HIGH) {
+	if (stmpe->irq >= 0) {
 		if (id == STMPE801_ID)
-			icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+			icr = STMPE801_REG_SYS_CTRL_INT_EN;
 		else
-			icr |= STMPE_ICR_LSB_HIGH;
-	}
+			icr = STMPE_ICR_LSB_GIM;
 
-	if (stmpe->pdata->irq_invert_polarity) {
-		if (id == STMPE801_ID)
-			icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
-		else
-			icr ^= STMPE_ICR_LSB_HIGH;
+		/* STMPE801 doesn't support Edge interrupts */
+		if (id != STMPE801_ID) {
+			if (irq_trigger == IRQF_TRIGGER_FALLING ||
+					irq_trigger == IRQF_TRIGGER_RISING)
+				icr |= STMPE_ICR_LSB_EDGE;
+		}
+
+		if (irq_trigger == IRQF_TRIGGER_RISING ||
+				irq_trigger == IRQF_TRIGGER_HIGH) {
+			if (id == STMPE801_ID)
+				icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+			else
+				icr |= STMPE_ICR_LSB_HIGH;
+		}
+
+		if (stmpe->pdata->irq_invert_polarity) {
+			if (id == STMPE801_ID)
+				icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
+			else
+				icr ^= STMPE_ICR_LSB_HIGH;
+		}
 	}
 
 	if (stmpe->pdata->autosleep) {
@@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
 		stmpe->irq = ci->irq;
 	}
 
+	if (stmpe->irq < 0) {
+		/* use alternate variant info for no-irq mode, if supported */
+		dev_info(stmpe->dev,
+			"%s configured in no-irq mode by platform data\n",
+			stmpe->variant->name);
+		if (!stmpe_noirq_variant_info[stmpe->partnum]) {
+			dev_err(stmpe->dev,
+				"%s does not support no-irq mode!\n",
+				stmpe->variant->name);
+			ret = -ENODEV;
+			goto free_gpio;
+		}
+		stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
+	}
+
 	ret = stmpe_chip_init(stmpe);
 	if (ret)
 		goto free_gpio;
 
-	ret = stmpe_irq_init(stmpe);
-	if (ret)
-		goto free_gpio;
+	if (stmpe->irq >= 0) {
+		ret = stmpe_irq_init(stmpe);
+		if (ret)
+			goto free_gpio;
 
-	ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
-			pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe);
-	if (ret) {
-		dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
-		goto out_removeirq;
+		ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
+				pdata->irq_trigger | IRQF_ONESHOT,
+				"stmpe", stmpe);
+		if (ret) {
+			dev_err(stmpe->dev, "failed to request IRQ: %d\n",
+					ret);
+			goto out_removeirq;
+		}
 	}
 
 	ret = stmpe_devices_init(stmpe);
@@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
 
 out_removedevs:
 	mfd_remove_devices(stmpe->dev);
-	free_irq(stmpe->irq, stmpe);
+	if (stmpe->irq >= 0)
+		free_irq(stmpe->irq, stmpe);
 out_removeirq:
-	stmpe_irq_remove(stmpe);
+	if (stmpe->irq >= 0)
+		stmpe_irq_remove(stmpe);
 free_gpio:
 	if (pdata->irq_over_gpio)
 		gpio_free(pdata->irq_gpio);
@@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe)
 {
 	mfd_remove_devices(stmpe->dev);
 
-	free_irq(stmpe->irq, stmpe);
-	stmpe_irq_remove(stmpe);
+	if (stmpe->irq >= 0) {
+		free_irq(stmpe->irq, stmpe);
+		stmpe_irq_remove(stmpe);
+	}
 
 	if (stmpe->pdata->irq_over_gpio)
 		gpio_free(stmpe->pdata->irq_gpio);
@@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
 		enable_irq_wake(stmpe->irq);
 
 	return 0;
@@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
 		disable_irq_wake(stmpe->irq);
 
 	return 0;
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
new file mode 100644
index 0000000..a66d4df
--- /dev/null
+++ b/drivers/mfd/tps65090.c
@@ -0,0 +1,387 @@
+/*
+ * Core driver for TI TPS65090 PMIC family
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65090.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+
+#define NUM_INT_REG 2
+#define TOTAL_NUM_REG 0x18
+
+/* interrupt status registers */
+#define TPS65090_INT_STS	0x0
+#define TPS65090_INT_STS2	0x1
+
+/* interrupt mask registers */
+#define TPS65090_INT_MSK	0x2
+#define TPS65090_INT_MSK2	0x3
+
+struct tps65090_irq_data {
+	u8		mask_reg;
+	u8		mask_pos;
+};
+
+#define TPS65090_IRQ(_reg, _mask_pos)		\
+	{					\
+		.mask_reg	= (_reg),	\
+		.mask_pos	= (_mask_pos),	\
+	}
+
+static const struct tps65090_irq_data tps65090_irqs[] = {
+	[0]		= TPS65090_IRQ(0, 0),
+	[1]		= TPS65090_IRQ(0, 1),
+	[2]		= TPS65090_IRQ(0, 2),
+	[3]		= TPS65090_IRQ(0, 3),
+	[4]		= TPS65090_IRQ(0, 4),
+	[5]		= TPS65090_IRQ(0, 5),
+	[6]		= TPS65090_IRQ(0, 6),
+	[7]		= TPS65090_IRQ(0, 7),
+	[8]		= TPS65090_IRQ(1, 0),
+	[9]		= TPS65090_IRQ(1, 1),
+	[10]		= TPS65090_IRQ(1, 2),
+	[11]		= TPS65090_IRQ(1, 3),
+	[12]		= TPS65090_IRQ(1, 4),
+	[13]		= TPS65090_IRQ(1, 5),
+	[14]		= TPS65090_IRQ(1, 6),
+	[15]		= TPS65090_IRQ(1, 7),
+};
+
+static struct mfd_cell tps65090s[] = {
+	{
+		.name = "tps65910-pmic",
+	},
+	{
+		.name = "tps65910-regulator",
+	},
+};
+
+struct tps65090 {
+	struct mutex		lock;
+	struct device		*dev;
+	struct i2c_client	*client;
+	struct regmap		*rmap;
+	struct irq_chip		irq_chip;
+	struct mutex		irq_lock;
+	int			irq_base;
+	unsigned int		id;
+};
+
+int tps65090_write(struct device *dev, int reg, uint8_t val)
+{
+	struct tps65090 *tps = dev_get_drvdata(dev);
+	return regmap_write(tps->rmap, reg, val);
+}
+EXPORT_SYMBOL_GPL(tps65090_write);
+
+int tps65090_read(struct device *dev, int reg, uint8_t *val)
+{
+	struct tps65090 *tps = dev_get_drvdata(dev);
+	unsigned int temp_val;
+	int ret;
+	ret = regmap_read(tps->rmap, reg, &temp_val);
+	if (!ret)
+		*val = temp_val;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tps65090_read);
+
+int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num)
+{
+	struct tps65090 *tps = dev_get_drvdata(dev);
+	return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u);
+}
+EXPORT_SYMBOL_GPL(tps65090_set_bits);
+
+int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num)
+{
+	struct tps65090 *tps = dev_get_drvdata(dev);
+	return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u);
+}
+EXPORT_SYMBOL_GPL(tps65090_clr_bits);
+
+static void tps65090_irq_lock(struct irq_data *data)
+{
+	struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&tps65090->irq_lock);
+}
+
+static void tps65090_irq_mask(struct irq_data *irq_data)
+{
+	struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->hwirq;
+	const struct tps65090_irq_data *data = &tps65090_irqs[__irq];
+
+	tps65090_set_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg),
+		data->mask_pos);
+}
+
+static void tps65090_irq_unmask(struct irq_data *irq_data)
+{
+	struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - tps65090->irq_base;
+	const struct tps65090_irq_data *data = &tps65090_irqs[__irq];
+
+	tps65090_clr_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg),
+		data->mask_pos);
+}
+
+static void tps65090_irq_sync_unlock(struct irq_data *data)
+{
+	struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data);
+
+	mutex_unlock(&tps65090->irq_lock);
+}
+
+static irqreturn_t tps65090_irq(int irq, void *data)
+{
+	struct tps65090 *tps65090 = data;
+	int ret = 0;
+	u8 status, mask;
+	unsigned long int acks = 0;
+	int i;
+
+	for (i = 0; i < NUM_INT_REG; i++) {
+		ret = tps65090_read(tps65090->dev, TPS65090_INT_MSK + i, &mask);
+		if (ret < 0) {
+			dev_err(tps65090->dev,
+				"failed to read mask reg [addr:%d]\n",
+				TPS65090_INT_MSK + i);
+			return IRQ_NONE;
+		}
+		ret = tps65090_read(tps65090->dev, TPS65090_INT_STS + i,
+			&status);
+		if (ret < 0) {
+			dev_err(tps65090->dev,
+				"failed to read status reg [addr:%d]\n",
+				 TPS65090_INT_STS + i);
+			return IRQ_NONE;
+		}
+		if (status) {
+			/* Ack only those interrupts which are not masked */
+			status &= (~mask);
+			ret = tps65090_write(tps65090->dev,
+					TPS65090_INT_STS + i, status);
+			if (ret < 0) {
+				dev_err(tps65090->dev,
+					"failed to write interrupt status\n");
+				return IRQ_NONE;
+			}
+			acks |= (status << (i * 8));
+		}
+	}
+
+	for_each_set_bit(i, &acks, ARRAY_SIZE(tps65090_irqs))
+		handle_nested_irq(tps65090->irq_base + i);
+	return acks ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int __devinit tps65090_irq_init(struct tps65090 *tps65090, int irq,
+	int irq_base)
+{
+	int i, ret;
+
+	if (!irq_base) {
+		dev_err(tps65090->dev, "IRQ base not set\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&tps65090->irq_lock);
+
+	for (i = 0; i < NUM_INT_REG; i++)
+		tps65090_write(tps65090->dev, TPS65090_INT_MSK + i, 0xFF);
+
+	for (i = 0; i < NUM_INT_REG; i++)
+		tps65090_write(tps65090->dev, TPS65090_INT_STS + i, 0xff);
+
+	tps65090->irq_base = irq_base;
+	tps65090->irq_chip.name = "tps65090";
+	tps65090->irq_chip.irq_mask = tps65090_irq_mask;
+	tps65090->irq_chip.irq_unmask = tps65090_irq_unmask;
+	tps65090->irq_chip.irq_bus_lock = tps65090_irq_lock;
+	tps65090->irq_chip.irq_bus_sync_unlock = tps65090_irq_sync_unlock;
+
+	for (i = 0; i < ARRAY_SIZE(tps65090_irqs); i++) {
+		int __irq = i + tps65090->irq_base;
+		irq_set_chip_data(__irq, tps65090);
+		irq_set_chip_and_handler(__irq, &tps65090->irq_chip,
+					 handle_simple_irq);
+		irq_set_nested_thread(__irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(__irq, IRQF_VALID);
+#endif
+	}
+
+	ret = request_threaded_irq(irq, NULL, tps65090_irq, IRQF_ONESHOT,
+				"tps65090", tps65090);
+	if (!ret) {
+		device_init_wakeup(tps65090->dev, 1);
+		enable_irq_wake(irq);
+	}
+
+	return ret;
+}
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS))
+		return true;
+	else
+		return false;
+}
+
+static const struct regmap_config tps65090_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = TOTAL_NUM_REG,
+	.num_reg_defaults_raw = TOTAL_NUM_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = is_volatile_reg,
+};
+
+static int __devinit tps65090_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct tps65090_platform_data *pdata = client->dev.platform_data;
+	struct tps65090 *tps65090;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&client->dev, "tps65090 requires platform data\n");
+		return -EINVAL;
+	}
+
+	tps65090 = devm_kzalloc(&client->dev, sizeof(struct tps65090),
+		GFP_KERNEL);
+	if (tps65090 == NULL)
+		return -ENOMEM;
+
+	tps65090->client = client;
+	tps65090->dev = &client->dev;
+	i2c_set_clientdata(client, tps65090);
+
+	mutex_init(&tps65090->lock);
+
+	if (client->irq) {
+		ret = tps65090_irq_init(tps65090, client->irq, pdata->irq_base);
+		if (ret) {
+			dev_err(&client->dev, "IRQ init failed with err: %d\n",
+				ret);
+			goto err_exit;
+		}
+	}
+
+	tps65090->rmap = regmap_init_i2c(tps65090->client,
+		&tps65090_regmap_config);
+	if (IS_ERR(tps65090->rmap)) {
+		dev_err(&client->dev, "regmap_init failed with err: %ld\n",
+			PTR_ERR(tps65090->rmap));
+		goto err_irq_exit;
+	};
+
+	ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
+		ARRAY_SIZE(tps65090s), NULL, 0);
+	if (ret) {
+		dev_err(&client->dev, "add mfd devices failed with err: %d\n",
+			ret);
+		goto err_regmap_exit;
+	}
+
+	return 0;
+
+err_regmap_exit:
+	regmap_exit(tps65090->rmap);
+
+err_irq_exit:
+	if (client->irq)
+		free_irq(client->irq, tps65090);
+err_exit:
+	return ret;
+}
+
+static int __devexit tps65090_i2c_remove(struct i2c_client *client)
+{
+	struct tps65090 *tps65090 = i2c_get_clientdata(client);
+
+	mfd_remove_devices(tps65090->dev);
+	regmap_exit(tps65090->rmap);
+	if (client->irq)
+		free_irq(client->irq, tps65090);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tps65090_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+	if (client->irq)
+		disable_irq(client->irq);
+	return 0;
+}
+
+static int tps65090_i2c_resume(struct i2c_client *client)
+{
+	if (client->irq)
+		enable_irq(client->irq);
+	return 0;
+}
+#endif
+
+static const struct i2c_device_id tps65090_id_table[] = {
+	{ "tps65090", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tps65090_id_table);
+
+static struct i2c_driver tps65090_driver = {
+	.driver	= {
+		.name	= "tps65090",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tps65090_i2c_probe,
+	.remove		= __devexit_p(tps65090_i2c_remove),
+#ifdef CONFIG_PM
+	.suspend	= tps65090_i2c_suspend,
+	.resume		= tps65090_i2c_resume,
+#endif
+	.id_table	= tps65090_id_table,
+};
+
+static int __init tps65090_init(void)
+{
+	return i2c_add_driver(&tps65090_driver);
+}
+subsys_initcall(tps65090_init);
+
+static void __exit tps65090_exit(void)
+{
+	i2c_del_driver(&tps65090_driver);
+}
+module_exit(tps65090_exit);
+
+MODULE_DESCRIPTION("TPS65090 core driver");
+MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
new file mode 100644
index 0000000..f7d854e
--- /dev/null
+++ b/drivers/mfd/tps65217.c
@@ -0,0 +1,242 @@
+/*
+ * tps65217.c
+ *
+ * TPS65217 chip family multi-function driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65217.h>
+
+/**
+ * tps65217_reg_read: Read a single tps65217 register.
+ *
+ * @tps: Device to read from.
+ * @reg: Register to read.
+ * @val: Contians the value
+ */
+int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
+			unsigned int *val)
+{
+	return regmap_read(tps->regmap, reg, val);
+}
+EXPORT_SYMBOL_GPL(tps65217_reg_read);
+
+/**
+ * tps65217_reg_write: Write a single tps65217 register.
+ *
+ * @tps65217: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
+			unsigned int val, unsigned int level)
+{
+	int ret;
+	unsigned int xor_reg_val;
+
+	switch (level) {
+	case TPS65217_PROTECT_NONE:
+		return regmap_write(tps->regmap, reg, val);
+	case TPS65217_PROTECT_L1:
+		xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK;
+		ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD,
+							xor_reg_val);
+		if (ret < 0)
+			return ret;
+
+		return regmap_write(tps->regmap, reg, val);
+	case TPS65217_PROTECT_L2:
+		xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK;
+		ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD,
+							xor_reg_val);
+		if (ret < 0)
+			return ret;
+		ret = regmap_write(tps->regmap, reg, val);
+		if (ret < 0)
+			return ret;
+		ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD,
+							xor_reg_val);
+		if (ret < 0)
+			return ret;
+		return regmap_write(tps->regmap, reg, val);
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(tps65217_reg_write);
+
+/**
+ * tps65217_update_bits: Modify bits w.r.t mask, val and level.
+ *
+ * @tps65217: Device to write to.
+ * @reg: Register to read-write to.
+ * @mask: Mask.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+int tps65217_update_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level)
+{
+	int ret;
+	unsigned int data;
+
+	ret = tps65217_reg_read(tps, reg, &data);
+	if (ret) {
+		dev_err(tps->dev, "Read from reg 0x%x failed\n", reg);
+		return ret;
+	}
+
+	data &= ~mask;
+	data |= val & mask;
+
+	ret = tps65217_reg_write(tps, reg, data, level);
+	if (ret)
+		dev_err(tps->dev, "Write for reg 0x%x failed\n", reg);
+
+	return ret;
+}
+
+int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level)
+{
+	return tps65217_update_bits(tps, reg, mask, val, level);
+}
+EXPORT_SYMBOL_GPL(tps65217_set_bits);
+
+int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level)
+{
+	return tps65217_update_bits(tps, reg, mask, 0, level);
+}
+EXPORT_SYMBOL_GPL(tps65217_clear_bits);
+
+static struct regmap_config tps65217_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int __devinit tps65217_probe(struct i2c_client *client,
+				const struct i2c_device_id *ids)
+{
+	struct tps65217 *tps;
+	struct tps65217_board *pdata = client->dev.platform_data;
+	int i, ret;
+	unsigned int version;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	tps->pdata = pdata;
+	tps->regmap = regmap_init_i2c(client, &tps65217_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		ret = PTR_ERR(tps->regmap);
+		dev_err(tps->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, tps);
+	tps->dev = &client->dev;
+
+	ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version);
+	if (ret < 0) {
+		dev_err(tps->dev, "Failed to read revision"
+					" register: %d\n", ret);
+		goto err_regmap;
+	}
+
+	dev_info(tps->dev, "TPS65217 ID %#x version 1.%d\n",
+			(version & TPS65217_CHIPID_CHIP_MASK) >> 4,
+			version & TPS65217_CHIPID_REV_MASK);
+
+	for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
+		struct platform_device *pdev;
+
+		pdev = platform_device_alloc("tps65217-pmic", i);
+		if (!pdev) {
+			dev_err(tps->dev, "Cannot create regulator %d\n", i);
+			continue;
+		}
+
+		pdev->dev.parent = tps->dev;
+		platform_device_add_data(pdev, &pdata->tps65217_init_data[i],
+					sizeof(pdata->tps65217_init_data[i]));
+		tps->regulator_pdev[i] = pdev;
+
+		platform_device_add(pdev);
+	}
+
+	return 0;
+
+err_regmap:
+	regmap_exit(tps->regmap);
+
+	return ret;
+}
+
+static int __devexit tps65217_remove(struct i2c_client *client)
+{
+	struct tps65217 *tps = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
+		platform_device_unregister(tps->regulator_pdev[i]);
+
+	regmap_exit(tps->regmap);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65217_id_table[] = {
+	{"tps65217", 0xF0},
+	{/* end of list */}
+};
+MODULE_DEVICE_TABLE(i2c, tps65217_id_table);
+
+static struct i2c_driver tps65217_driver = {
+	.driver		= {
+		.name	= "tps65217",
+	},
+	.id_table	= tps65217_id_table,
+	.probe		= tps65217_probe,
+	.remove		= __devexit_p(tps65217_remove),
+};
+
+static int __init tps65217_init(void)
+{
+	return i2c_add_driver(&tps65217_driver);
+}
+subsys_initcall(tps65217_init);
+
+static void __exit tps65217_exit(void)
+{
+	i2c_del_driver(&tps65217_driver);
+}
+module_exit(tps65217_exit);
+
+MODULE_AUTHOR("AnilKumar Ch <anilkumar@ti.com>");
+MODULE_DESCRIPTION("TPS65217 chip family multi-function driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c
index 95c0d79..c9ed5c0 100644
--- a/drivers/mfd/tps65910-irq.c
+++ b/drivers/mfd/tps65910-irq.c
@@ -145,12 +145,23 @@ static void tps65910_irq_disable(struct irq_data *data)
 	tps65910->irq_mask |= ( 1 << irq_to_tps65910_irq(tps65910, data->irq));
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int tps65910_irq_set_wake(struct irq_data *data, unsigned int enable)
+{
+	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
+	return irq_set_irq_wake(tps65910->chip_irq, enable);
+}
+#else
+#define tps65910_irq_set_wake NULL
+#endif
+
 static struct irq_chip tps65910_irq_chip = {
 	.name = "tps65910",
 	.irq_bus_lock = tps65910_irq_lock,
 	.irq_bus_sync_unlock = tps65910_irq_sync_unlock,
 	.irq_disable = tps65910_irq_disable,
 	.irq_enable = tps65910_irq_enable,
+	.irq_set_wake = tps65910_irq_set_wake,
 };
 
 int tps65910_irq_init(struct tps65910 *tps65910, int irq,
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 4392f6b..bf2b25e 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -16,10 +16,12 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>
+#include <linux/regmap.h>
 #include <linux/mfd/tps65910.h>
 
 static struct mfd_cell tps65910s[] = {
@@ -38,99 +40,56 @@ static struct mfd_cell tps65910s[] = {
 static int tps65910_i2c_read(struct tps65910 *tps65910, u8 reg,
 				  int bytes, void *dest)
 {
-	struct i2c_client *i2c = tps65910->i2c_client;
-	struct i2c_msg xfer[2];
-	int ret;
-
-	/* Write register */
-	xfer[0].addr = i2c->addr;
-	xfer[0].flags = 0;
-	xfer[0].len = 1;
-	xfer[0].buf = &reg;
-
-	/* Read data */
-	xfer[1].addr = i2c->addr;
-	xfer[1].flags = I2C_M_RD;
-	xfer[1].len = bytes;
-	xfer[1].buf = dest;
-
-	ret = i2c_transfer(i2c->adapter, xfer, 2);
-	if (ret == 2)
-		ret = 0;
-	else if (ret >= 0)
-		ret = -EIO;
-
-	return ret;
+	return regmap_bulk_read(tps65910->regmap, reg, dest, bytes);
 }
 
 static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg,
-				   int bytes, void *src)
+				  int bytes, void *src)
 {
-	struct i2c_client *i2c = tps65910->i2c_client;
-	/* we add 1 byte for device register */
-	u8 msg[TPS65910_MAX_REGISTER + 1];
-	int ret;
-
-	if (bytes > TPS65910_MAX_REGISTER)
-		return -EINVAL;
-
-	msg[0] = reg;
-	memcpy(&msg[1], src, bytes);
-
-	ret = i2c_master_send(i2c, msg, bytes + 1);
-	if (ret < 0)
-		return ret;
-	if (ret != bytes + 1)
-		return -EIO;
-	return 0;
+	return regmap_bulk_write(tps65910->regmap, reg, src, bytes);
 }
 
 int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask)
 {
-	u8 data;
-	int err;
-
-	mutex_lock(&tps65910->io_mutex);
-	err = tps65910_i2c_read(tps65910, reg, 1, &data);
-	if (err) {
-		dev_err(tps65910->dev, "read from reg %x failed\n", reg);
-		goto out;
-	}
-
-	data |= mask;
-	err = tps65910_i2c_write(tps65910, reg, 1, &data);
-	if (err)
-		dev_err(tps65910->dev, "write to reg %x failed\n", reg);
-
-out:
-	mutex_unlock(&tps65910->io_mutex);
-	return err;
+	return regmap_update_bits(tps65910->regmap, reg, mask, mask);
 }
 EXPORT_SYMBOL_GPL(tps65910_set_bits);
 
 int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask)
 {
-	u8 data;
-	int err;
-
-	mutex_lock(&tps65910->io_mutex);
-	err = tps65910_i2c_read(tps65910, reg, 1, &data);
-	if (err) {
-		dev_err(tps65910->dev, "read from reg %x failed\n", reg);
-		goto out;
-	}
-
-	data &= ~mask;
-	err = tps65910_i2c_write(tps65910, reg, 1, &data);
-	if (err)
-		dev_err(tps65910->dev, "write to reg %x failed\n", reg);
-
-out:
-	mutex_unlock(&tps65910->io_mutex);
-	return err;
+	return regmap_update_bits(tps65910->regmap, reg, mask, 0);
 }
 EXPORT_SYMBOL_GPL(tps65910_clear_bits);
 
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	struct tps65910 *tps65910 = dev_get_drvdata(dev);
+
+	/*
+	 * Caching all regulator registers.
+	 * All regualator register address range is same for
+	 * TPS65910 and TPS65911
+	 */
+	if ((reg >= TPS65910_VIO) && (reg <= TPS65910_VDAC)) {
+		/* Check for non-existing register */
+		if (tps65910_chip_id(tps65910) == TPS65910)
+			if ((reg == TPS65911_VDDCTRL_OP) ||
+				(reg == TPS65911_VDDCTRL_SR))
+				return true;
+		return false;
+	}
+	return true;
+}
+
+static const struct regmap_config tps65910_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = TPS65910_MAX_REGISTER,
+	.num_reg_defaults_raw = TPS65910_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static int tps65910_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -161,6 +120,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 	tps65910->write = tps65910_i2c_write;
 	mutex_init(&tps65910->io_mutex);
 
+	tps65910->regmap = regmap_init_i2c(i2c, &tps65910_regmap_config);
+	if (IS_ERR(tps65910->regmap)) {
+		ret = PTR_ERR(tps65910->regmap);
+		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+		goto regmap_err;
+	}
+
 	ret = mfd_add_devices(tps65910->dev, -1,
 			      tps65910s, ARRAY_SIZE(tps65910s),
 			      NULL, 0);
@@ -178,6 +144,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 	return ret;
 
 err:
+	regmap_exit(tps65910->regmap);
+regmap_err:
 	kfree(tps65910);
 	kfree(init_data);
 	return ret;
@@ -189,6 +157,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c)
 
 	tps65910_irq_exit(tps65910);
 	mfd_remove_devices(tps65910->dev);
+	regmap_exit(tps65910->regmap);
 	kfree(tps65910);
 
 	return 0;
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 806680d..7c2267e 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -46,9 +46,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-#include <plat/cpu.h>
-#endif
+#include "twl-core.h"
 
 /*
  * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
@@ -116,8 +114,8 @@
 #define twl_has_watchdog()        false
 #endif
 
-#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
-	defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || \
+	defined(CONFIG_MFD_TWL4030_AUDIO_MODULE)
 #define twl_has_codec()	true
 #else
 #define twl_has_codec()	false
@@ -147,12 +145,10 @@
 #define SUB_CHIP_ID1 1
 #define SUB_CHIP_ID2 2
 #define SUB_CHIP_ID3 3
+#define SUB_CHIP_ID_INVAL 0xff
 
 #define TWL_MODULE_LAST TWL4030_MODULE_LAST
 
-#define TWL4030_NR_IRQS    34 /* core:8, power:8, gpio: 18 */
-#define TWL6030_NR_IRQS    20
-
 /* Base Address defns for twl4030_map[] */
 
 /* subchip/slave 0 - USB ID */
@@ -314,7 +310,7 @@ static struct twl_mapping twl6030_map[] = {
 	 * so they continue to match the order in this table.
 	 */
 	{ SUB_CHIP_ID1, TWL6030_BASEADD_USB },
-	{ SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO },
+	{ SUB_CHIP_ID_INVAL, TWL6030_BASEADD_AUDIO },
 	{ SUB_CHIP_ID2, TWL6030_BASEADD_DIEID },
 	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
 	{ SUB_CHIP_ID1, TWL6030_BASEADD_PIH },
@@ -376,6 +372,11 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 		return -EPERM;
 	}
 	sid = twl_map[mod_no].sid;
+	if (unlikely(sid == SUB_CHIP_ID_INVAL)) {
+		pr_err("%s: module %d is not part of the pmic\n",
+		       DRIVER_NAME, mod_no);
+		return -EINVAL;
+	}
 	twl = &twl_modules[sid];
 
 	mutex_lock(&twl->xfer_lock);
@@ -433,6 +434,11 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 		return -EPERM;
 	}
 	sid = twl_map[mod_no].sid;
+	if (unlikely(sid == SUB_CHIP_ID_INVAL)) {
+		pr_err("%s: module %d is not part of the pmic\n",
+		       DRIVER_NAME, mod_no);
+		return -EINVAL;
+	}
 	twl = &twl_modules[sid];
 
 	mutex_lock(&twl->xfer_lock);
@@ -663,7 +669,8 @@ add_regulator(int num, struct regulator_init_data *pdata,
  */
 
 static int
-add_children(struct twl4030_platform_data *pdata, unsigned long features)
+add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
+		unsigned long features)
 {
 	struct device	*child;
 	unsigned sub_chip_id;
@@ -671,7 +678,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	if (twl_has_gpio() && pdata->gpio) {
 		child = add_child(SUB_CHIP_ID1, "twl4030_gpio",
 				pdata->gpio, sizeof(*pdata->gpio),
-				false, pdata->irq_base + GPIO_INTR_OFFSET, 0);
+				false, irq_base + GPIO_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -679,7 +686,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	if (twl_has_keypad() && pdata->keypad) {
 		child = add_child(SUB_CHIP_ID2, "twl4030_keypad",
 				pdata->keypad, sizeof(*pdata->keypad),
-				true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0);
+				true, irq_base + KEYPAD_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -687,7 +694,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	if (twl_has_madc() && pdata->madc) {
 		child = add_child(2, "twl4030_madc",
 				pdata->madc, sizeof(*pdata->madc),
-				true, pdata->irq_base + MADC_INTR_OFFSET, 0);
+				true, irq_base + MADC_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -703,7 +710,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 		sub_chip_id = twl_map[TWL_MODULE_RTC].sid;
 		child = add_child(sub_chip_id, "twl_rtc",
 				NULL, 0,
-				true, pdata->irq_base + RTC_INTR_OFFSET, 0);
+				true, irq_base + RTC_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -756,8 +763,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 				pdata->usb, sizeof(*pdata->usb),
 				true,
 				/* irq0 = USB_PRES, irq1 = USB */
-				pdata->irq_base + USB_PRES_INTR_OFFSET,
-				pdata->irq_base + USB_INTR_OFFSET);
+				irq_base + USB_PRES_INTR_OFFSET,
+				irq_base + USB_INTR_OFFSET);
 
 		if (IS_ERR(child))
 			return PTR_ERR(child);
@@ -805,8 +812,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			pdata->usb, sizeof(*pdata->usb),
 			true,
 			/* irq1 = VBUS_PRES, irq0 = USB ID */
-			pdata->irq_base + USBOTG_INTR_OFFSET,
-			pdata->irq_base + USB_PRES_INTR_OFFSET);
+			irq_base + USBOTG_INTR_OFFSET,
+			irq_base + USB_PRES_INTR_OFFSET);
 
 		if (IS_ERR(child))
 			return PTR_ERR(child);
@@ -833,7 +840,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 
 	if (twl_has_pwrbutton() && twl_class_is_4030()) {
 		child = add_child(1, "twl4030_pwrbutton",
-				NULL, 0, true, pdata->irq_base + 8 + 0, 0);
+				NULL, 0, true, irq_base + 8 + 0, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -847,15 +854,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_codec() && pdata->audio && twl_class_is_6030()) {
-		sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
-		child = add_child(sub_chip_id, "twl6040",
-				pdata->audio, sizeof(*pdata->audio),
-				false, 0, 0);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-	}
-
 	/* twl4030 regulators */
 	if (twl_has_regulator() && twl_class_is_4030()) {
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1,
@@ -1092,8 +1090,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 		child = add_child(3, "twl4030_bci",
 				pdata->bci, sizeof(*pdata->bci), false,
 				/* irq0 = CHG_PRES, irq1 = BCI */
-				pdata->irq_base + BCI_PRES_INTR_OFFSET,
-				pdata->irq_base + BCI_INTR_OFFSET);
+				irq_base + BCI_PRES_INTR_OFFSET,
+				irq_base + BCI_INTR_OFFSET);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -1193,26 +1191,24 @@ static void clocks_init(struct device *dev,
 
 /*----------------------------------------------------------------------*/
 
-int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
-int twl4030_exit_irq(void);
-int twl4030_init_chip_irq(const char *chip);
-int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
-int twl6030_exit_irq(void);
 
 static int twl_remove(struct i2c_client *client)
 {
-	unsigned i;
+	unsigned i, num_slaves;
 	int status;
 
-	if (twl_class_is_4030())
+	if (twl_class_is_4030()) {
 		status = twl4030_exit_irq();
-	else
+		num_slaves = TWL_NUM_SLAVES;
+	} else {
 		status = twl6030_exit_irq();
+		num_slaves = TWL_NUM_SLAVES - 1;
+	}
 
 	if (status < 0)
 		return status;
 
-	for (i = 0; i < TWL_NUM_SLAVES; i++) {
+	for (i = 0; i < num_slaves; i++) {
 		struct twl_client	*twl = &twl_modules[i];
 
 		if (twl->client && twl->client != client)
@@ -1223,20 +1219,15 @@ static int twl_remove(struct i2c_client *client)
 	return 0;
 }
 
-/* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
+/* NOTE: This driver only handles a single twl4030/tps659x0 chip */
 static int __devinit
 twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	int				status;
-	unsigned			i;
 	struct twl4030_platform_data	*pdata = client->dev.platform_data;
 	struct device_node		*node = client->dev.of_node;
-	u8 temp;
-	int ret = 0;
-	int nr_irqs = TWL4030_NR_IRQS;
-
-	if ((id->driver_data) & TWL6030_CLASS)
-		nr_irqs = TWL6030_NR_IRQS;
+	int				irq_base = 0;
+	int				status;
+	unsigned			i, num_slaves;
 
 	if (node && !pdata) {
 		/*
@@ -1255,17 +1246,6 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -EINVAL;
 	}
 
-	status = irq_alloc_descs(-1, pdata->irq_base, nr_irqs, 0);
-	if (IS_ERR_VALUE(status)) {
-		dev_err(&client->dev, "Fail to allocate IRQ descs\n");
-		return status;
-	}
-
-	pdata->irq_base = status;
-	pdata->irq_end = pdata->irq_base + nr_irqs;
-	irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0,
-			      &irq_domain_simple_ops, NULL);
-
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
 		dev_dbg(&client->dev, "can't talk I2C?\n");
 		return -EIO;
@@ -1276,13 +1256,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -EBUSY;
 	}
 
-	for (i = 0; i < TWL_NUM_SLAVES; i++) {
-		struct twl_client	*twl = &twl_modules[i];
+	if ((id->driver_data) & TWL6030_CLASS) {
+		twl_id = TWL6030_CLASS_ID;
+		twl_map = &twl6030_map[0];
+		num_slaves = TWL_NUM_SLAVES - 1;
+	} else {
+		twl_id = TWL4030_CLASS_ID;
+		twl_map = &twl4030_map[0];
+		num_slaves = TWL_NUM_SLAVES;
+	}
+
+	for (i = 0; i < num_slaves; i++) {
+		struct twl_client *twl = &twl_modules[i];
 
 		twl->address = client->addr + i;
-		if (i == 0)
+		if (i == 0) {
 			twl->client = client;
-		else {
+		} else {
 			twl->client = i2c_new_dummy(client->adapter,
 					twl->address);
 			if (!twl->client) {
@@ -1294,22 +1284,16 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 		mutex_init(&twl->xfer_lock);
 	}
+
 	inuse = true;
-	if ((id->driver_data) & TWL6030_CLASS) {
-		twl_id = TWL6030_CLASS_ID;
-		twl_map = &twl6030_map[0];
-	} else {
-		twl_id = TWL4030_CLASS_ID;
-		twl_map = &twl4030_map[0];
-	}
 
 	/* setup clock framework */
 	clocks_init(&client->dev, pdata->clock);
 
 	/* read TWL IDCODE Register */
 	if (twl_id == TWL4030_CLASS_ID) {
-		ret = twl_read_idcode_register();
-		WARN(ret < 0, "Error: reading twl_idcode register value\n");
+		status = twl_read_idcode_register();
+		WARN(status < 0, "Error: reading twl_idcode register value\n");
 	}
 
 	/* load power event scripts */
@@ -1317,31 +1301,31 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		twl4030_power_init(pdata->power);
 
 	/* Maybe init the T2 Interrupt subsystem */
-	if (client->irq
-			&& pdata->irq_base
-			&& pdata->irq_end > pdata->irq_base) {
+	if (client->irq) {
 		if (twl_class_is_4030()) {
 			twl4030_init_chip_irq(id->name);
-			status = twl4030_init_irq(client->irq, pdata->irq_base,
-			pdata->irq_end);
+			irq_base = twl4030_init_irq(&client->dev, client->irq);
 		} else {
-			status = twl6030_init_irq(client->irq, pdata->irq_base,
-			pdata->irq_end);
+			irq_base = twl6030_init_irq(&client->dev, client->irq);
 		}
 
-		if (status < 0)
+		if (irq_base < 0) {
+			status = irq_base;
 			goto fail;
+		}
 	}
 
-	/* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
+	/*
+	 * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
 	 * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
 	 * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
 	 */
-
 	if (twl_class_is_4030()) {
+		u8 temp;
+
 		twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
 		temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
-		I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
+			I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
 		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
 	}
 
@@ -1349,11 +1333,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (node)
 		status = of_platform_populate(node, NULL, NULL, &client->dev);
 	if (status)
-		status = add_children(pdata, id->driver_data);
+		status = add_children(pdata, irq_base, id->driver_data);
 
 fail:
 	if (status < 0)
 		twl_remove(client);
+
 	return status;
 }
 
diff --git a/drivers/mfd/twl-core.h b/drivers/mfd/twl-core.h
index 8c50a55..6ff99dc 100644
--- a/drivers/mfd/twl-core.h
+++ b/drivers/mfd/twl-core.h
@@ -1,9 +1,9 @@
 #ifndef __TWL_CORE_H__
 #define __TWL_CORE_H__
 
-extern int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+extern int twl6030_init_irq(struct device *dev, int irq_num);
 extern int twl6030_exit_irq(void);
-extern int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+extern int twl4030_init_irq(struct device *dev, int irq_num);
 extern int twl4030_exit_irq(void);
 extern int twl4030_init_chip_irq(const char *chip);
 
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index b69bb51..5d656e8 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -28,10 +28,12 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
-
+#include <linux/of.h>
+#include <linux/irqdomain.h>
 #include <linux/i2c/twl.h>
 
 #include "twl-core.h"
@@ -53,13 +55,14 @@
  *	base + 8  .. base + 15	SIH for PWR_INT
  *	base + 16 .. base + 33	SIH for GPIO
  */
+#define TWL4030_CORE_NR_IRQS	8
+#define TWL4030_PWR_NR_IRQS	8
 
 /* PIH register offsets */
 #define REG_PIH_ISR_P1			0x01
 #define REG_PIH_ISR_P2			0x02
 #define REG_PIH_SIR			0x03	/* for testing */
 
-
 /* Linux could (eventually) use either IRQ line */
 static int irq_line;
 
@@ -111,7 +114,8 @@ static int nr_sih_modules;
 #define TWL4030_MODULE_INT_PWR		TWL4030_MODULE_INT
 
 
-/* Order in this table matches order in PIH_ISR.  That is,
+/*
+ * Order in this table matches order in PIH_ISR.  That is,
  * BIT(n) in PIH_ISR is sih_modules[n].
  */
 /* sih_modules_twl4030 is used both in twl4030 and twl5030 */
@@ -288,7 +292,6 @@ static unsigned twl4030_irq_base;
  */
 static irqreturn_t handle_twl4030_pih(int irq, void *devid)
 {
-	int		module_irq;
 	irqreturn_t	ret;
 	u8		pih_isr;
 
@@ -299,16 +302,18 @@ static irqreturn_t handle_twl4030_pih(int irq, void *devid)
 		return IRQ_NONE;
 	}
 
-	/* these handlers deal with the relevant SIH irq status */
-	for (module_irq = twl4030_irq_base;
-			pih_isr;
-			pih_isr >>= 1, module_irq++) {
-		if (pih_isr & 0x1)
-			handle_nested_irq(module_irq);
+	while (pih_isr) {
+		unsigned long	pending = __ffs(pih_isr);
+		unsigned int	irq;
+
+		pih_isr &= ~BIT(pending);
+		irq = pending + twl4030_irq_base;
+		handle_nested_irq(irq);
 	}
 
 	return IRQ_HANDLED;
 }
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -337,7 +342,6 @@ static int twl4030_init_sih_modules(unsigned line)
 	memset(buf, 0xff, sizeof buf);
 	sih = sih_modules;
 	for (i = 0; i < nr_sih_modules; i++, sih++) {
-
 		/* skip USB -- it's funky */
 		if (!sih->bytes_ixr)
 			continue;
@@ -352,7 +356,8 @@ static int twl4030_init_sih_modules(unsigned line)
 			pr_err("twl4030: err %d initializing %s %s\n",
 					status, sih->name, "IMR");
 
-		/* Maybe disable "exclusive" mode; buffer second pending irq;
+		/*
+		 * Maybe disable "exclusive" mode; buffer second pending irq;
 		 * set Clear-On-Read (COR) bit.
 		 *
 		 * NOTE that sometimes COR polarity is documented as being
@@ -382,7 +387,8 @@ static int twl4030_init_sih_modules(unsigned line)
 		if (sih->irq_lines <= line)
 			continue;
 
-		/* Clear pending interrupt status.  Either the read was
+		/*
+		 * Clear pending interrupt status.  Either the read was
 		 * enough, or we need to write those bits.  Repeat, in
 		 * case an IRQ is pending (PENDDIS=0) ... that's not
 		 * uncommon with PWR_INT.PWRON.
@@ -398,7 +404,8 @@ static int twl4030_init_sih_modules(unsigned line)
 				status = twl_i2c_write(sih->module, buf,
 					sih->mask[line].isr_offset,
 					sih->bytes_ixr);
-			/* else COR=1 means read sufficed.
+			/*
+			 * else COR=1 means read sufficed.
 			 * (for most SIH modules...)
 			 */
 		}
@@ -410,7 +417,8 @@ static int twl4030_init_sih_modules(unsigned line)
 static inline void activate_irq(int irq)
 {
 #ifdef CONFIG_ARM
-	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	/*
+	 * ARM requires an extra step to clear IRQ_NOREQUEST, which it
 	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
 	 */
 	set_irq_flags(irq, IRQF_VALID);
@@ -620,33 +628,24 @@ static irqreturn_t handle_twl4030_sih(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static unsigned twl4030_irq_next;
-
-/* returns the first IRQ used by this SIH bank,
- * or negative errno
- */
-int twl4030_sih_setup(int module)
+/* returns the first IRQ used by this SIH bank, or negative errno */
+int twl4030_sih_setup(struct device *dev, int module, int irq_base)
 {
 	int			sih_mod;
 	const struct sih	*sih = NULL;
 	struct sih_agent	*agent;
 	int			i, irq;
 	int			status = -EINVAL;
-	unsigned		irq_base = twl4030_irq_next;
 
 	/* only support modules with standard clear-on-read for now */
-	for (sih_mod = 0, sih = sih_modules;
-			sih_mod < nr_sih_modules;
+	for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
 			sih_mod++, sih++) {
 		if (sih->module == module && sih->set_cor) {
-			if (!WARN((irq_base + sih->bits) > NR_IRQS,
-					"irq %d for %s too big\n",
-					irq_base + sih->bits,
-					sih->name))
-				status = 0;
+			status = 0;
 			break;
 		}
 	}
+
 	if (status < 0)
 		return status;
 
@@ -654,8 +653,6 @@ int twl4030_sih_setup(int module)
 	if (!agent)
 		return -ENOMEM;
 
-	status = 0;
-
 	agent->irq_base = irq_base;
 	agent->sih = sih;
 	agent->imr = ~0;
@@ -671,8 +668,6 @@ int twl4030_sih_setup(int module)
 		activate_irq(irq);
 	}
 
-	twl4030_irq_next += i;
-
 	/* replace generic PIH handler (handle_simple_irq) */
 	irq = sih_mod + twl4030_irq_base;
 	irq_set_handler_data(irq, agent);
@@ -680,26 +675,43 @@ int twl4030_sih_setup(int module)
 	status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0,
 				      agent->irq_name ?: sih->name, NULL);
 
-	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
-			irq, irq_base, twl4030_irq_next - 1);
+	dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
+			irq, irq_base, irq_base + i - 1);
 
 	return status < 0 ? status : irq_base;
 }
 
 /* FIXME need a call to reverse twl4030_sih_setup() ... */
 
-
 /*----------------------------------------------------------------------*/
 
 /* FIXME pass in which interrupt line we'll use ... */
 #define twl_irq_line	0
 
-int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+int twl4030_init_irq(struct device *dev, int irq_num)
 {
 	static struct irq_chip	twl4030_irq_chip;
+	int			status, i;
+	int			irq_base, irq_end, nr_irqs;
+	struct			device_node *node = dev->of_node;
 
-	int			status;
-	int			i;
+	/*
+	 * TWL core and pwr interrupts must be contiguous because
+	 * the hwirqs numbers are defined contiguously from 1 to 15.
+	 * Create only one domain for both.
+	 */
+	nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		dev_err(dev, "Fail to allocate IRQ descs\n");
+		return irq_base;
+	}
+
+	irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
+
+	irq_end = irq_base + TWL4030_CORE_NR_IRQS;
 
 	/*
 	 * Mask and clear all TWL4030 interrupts since initially we do
@@ -711,7 +723,8 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 
 	twl4030_irq_base = irq_base;
 
-	/* install an irq handler for each of the SIH modules;
+	/*
+	 * Install an irq handler for each of the SIH modules;
 	 * clone dummy irq_chip since PIH can't *do* anything
 	 */
 	twl4030_irq_chip = dummy_irq_chip;
@@ -725,14 +738,14 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 		irq_set_nested_thread(i, 1);
 		activate_irq(i);
 	}
-	twl4030_irq_next = i;
-	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
-			irq_num, irq_base, twl4030_irq_next - 1);
+
+	dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
+			irq_num, irq_base, irq_end);
 
 	/* ... and the PWR_INT module ... */
-	status = twl4030_sih_setup(TWL4030_MODULE_INT);
+	status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
 	if (status < 0) {
-		pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
+		dev_err(dev, "sih_setup PWR INT --> %d\n", status);
 		goto fail;
 	}
 
@@ -741,11 +754,11 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 				      IRQF_ONESHOT,
 				      "TWL4030-PIH", NULL);
 	if (status < 0) {
-		pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+		dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
 		goto fail_rqirq;
 	}
 
-	return status;
+	return irq_base;
 fail_rqirq:
 	/* clean up twl4030_sih_setup */
 fail:
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index c6b456a..b76902f 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -39,6 +39,8 @@
 #include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
 #include <linux/suspend.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
 
 #include "twl-core.h"
 
@@ -51,8 +53,8 @@
  *
  * We set up IRQs starting at a platform-specified base. An interrupt map table,
  * specifies mapping between interrupt number and the associated module.
- *
  */
+#define TWL6030_NR_IRQS    20
 
 static int twl6030_interrupt_mapping[24] = {
 	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
@@ -185,8 +187,17 @@ static int twl6030_irq_thread(void *data)
 			}
 		local_irq_enable();
 		}
-		ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes,
-				REG_INT_STS_A, 3); /* clear INT_STS_A */
+
+		/*
+		 * NOTE:
+		 * Simulation confirms that documentation is wrong w.r.t the
+		 * interrupt status clear operation. A single *byte* write to
+		 * any one of STS_A to STS_C register results in all three
+		 * STS registers being reset. Since it does not matter which
+		 * value is written, all three registers are cleared on a
+		 * single byte write, so we just use 0x0 to clear.
+		 */
+		ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
 		if (ret)
 			pr_warning("twl6030: I2C error in clearing PIH ISR\n");
 
@@ -227,7 +238,7 @@ static inline void activate_irq(int irq)
 #endif
 }
 
-int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
 {
 	if (on)
 		atomic_inc(&twl6030_wakeirqs);
@@ -237,11 +248,6 @@ int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
 	return 0;
 }
 
-/*----------------------------------------------------------------------*/
-
-static unsigned twl6030_irq_next;
-
-/*----------------------------------------------------------------------*/
 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
 {
 	int ret;
@@ -311,7 +317,8 @@ int twl6030_mmc_card_detect_config(void)
 									ret);
 		return ret;
 	}
-	return 0;
+
+	return twl6030_irq_base + MMCDETECT_INTR_OFFSET;
 }
 EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
 
@@ -340,29 +347,44 @@ int twl6030_mmc_card_detect(struct device *dev, int slot)
 }
 EXPORT_SYMBOL(twl6030_mmc_card_detect);
 
-int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+int twl6030_init_irq(struct device *dev, int irq_num)
 {
-
-	int	status = 0;
-	int	i;
+	struct			device_node *node = dev->of_node;
+	int			nr_irqs, irq_base, irq_end;
 	struct task_struct	*task;
-	int ret;
-	u8 mask[4];
+	static struct irq_chip  twl6030_irq_chip;
+	int			status = 0;
+	int			i;
+	u8			mask[4];
+
+	nr_irqs = TWL6030_NR_IRQS;
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		dev_err(dev, "Fail to allocate IRQ descs\n");
+		return irq_base;
+	}
+
+	irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
+
+	irq_end = irq_base + nr_irqs;
 
-	static struct irq_chip	twl6030_irq_chip;
 	mask[1] = 0xFF;
 	mask[2] = 0xFF;
 	mask[3] = 0xFF;
-	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
-			REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */
-	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
-			REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */
-	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
-			REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */
+
+	/* mask all int lines */
+	twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
+	/* mask all int sts */
+	twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
+	/* clear INT_STS_A,B,C */
+	twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
 
 	twl6030_irq_base = irq_base;
 
-	/* install an irq handler for each of the modules;
+	/*
+	 * install an irq handler for each of the modules;
 	 * clone dummy irq_chip since PIH can't *do* anything
 	 */
 	twl6030_irq_chip = dummy_irq_chip;
@@ -377,30 +399,29 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 		activate_irq(i);
 	}
 
-	twl6030_irq_next = i;
-	pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
-			irq_num, irq_base, twl6030_irq_next - 1);
+	dev_info(dev, "PIH (irq %d) chaining IRQs %d..%d\n",
+			irq_num, irq_base, irq_end);
 
 	/* install an irq handler to demultiplex the TWL6030 interrupt */
 	init_completion(&irq_event);
 
-	status = request_irq(irq_num, handle_twl6030_pih, 0,
-				"TWL6030-PIH", &irq_event);
+	status = request_irq(irq_num, handle_twl6030_pih, 0, "TWL6030-PIH",
+			     &irq_event);
 	if (status < 0) {
-		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+		dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
 		goto fail_irq;
 	}
 
 	task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
 	if (IS_ERR(task)) {
-		pr_err("twl6030: could not create irq %d thread!\n", irq_num);
+		dev_err(dev, "could not create irq %d thread!\n", irq_num);
 		status = PTR_ERR(task);
 		goto fail_kthread;
 	}
 
 	twl_irq = irq_num;
 	register_pm_notifier(&twl6030_irq_pm_notifier_block);
-	return status;
+	return irq_base;
 
 fail_kthread:
 	free_irq(irq_num, &irq_event);
@@ -408,6 +429,7 @@ fail_kthread:
 fail_irq:
 	for (i = irq_base; i < irq_end; i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
+
 	return status;
 }
 
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 745c879..4bceee9 100644
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -89,7 +89,7 @@ static const struct spi_device_id wm831x_spi_ids[] = {
 	{ "wm8326", WM8326 },
 	{ },
 };
-MODULE_DEVICE_TABLE(spi, wm831x_spi_id);
+MODULE_DEVICE_TABLE(spi, wm831x_spi_ids);
 
 static struct spi_driver wm831x_spi_driver = {
 	.driver = {
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 237764a..1189a17 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -271,8 +271,7 @@ static int wm8400_init(struct wm8400 *wm8400,
 		return -EIO;
 	}
 	if (i != reg_data[WM8400_RESET_ID].default_val) {
-		dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n",
-			reg);
+		dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", i);
 		return -ENODEV;
 	}
 
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 98733d4..9d7ca1e 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -639,7 +639,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 
 	pm_runtime_enable(wm8994->dev);
-	pm_runtime_resume(wm8994->dev);
+	pm_runtime_idle(wm8994->dev);
 
 	return 0;
 
diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c
index 7605b60..bfd25af 100644
--- a/drivers/mfd/wm8994-regmap.c
+++ b/drivers/mfd/wm8994-regmap.c
@@ -20,7 +20,6 @@
 #include "wm8994.h"
 
 static struct reg_default wm1811_defaults[] = {
-	{ 0x0000, 0x1811 },    /* R0    - Software Reset */
 	{ 0x0001, 0x0000 },    /* R1    - Power Management (1) */
 	{ 0x0002, 0x6000 },    /* R2    - Power Management (2) */
 	{ 0x0003, 0x0000 },    /* R3    - Power Management (3) */
@@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x0036, 0x0000 },    /* R54   - Speaker Mixer */
 	{ 0x0037, 0x0000 },    /* R55   - Additional Control */
 	{ 0x0038, 0x0000 },    /* R56   - AntiPOP (1) */
-	{ 0x0039, 0x0180 },    /* R57   - AntiPOP (2) */
+	{ 0x0039, 0x0000 },    /* R57   - AntiPOP (2) */
 	{ 0x003B, 0x000D },    /* R59   - LDO 1 */
 	{ 0x003C, 0x0003 },    /* R60   - LDO 2 */
 	{ 0x003D, 0x0039 },    /* R61   - MICBIAS1 */
@@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x004C, 0x1F25 },    /* R76   - Charge Pump (1) */
 	{ 0x004D, 0xAB19 },    /* R77   - Charge Pump (2) */
 	{ 0x0051, 0x0004 },    /* R81   - Class W (1) */
-	{ 0x0054, 0x0000 },    /* R84   - DC Servo (1) */
 	{ 0x0055, 0x054A },    /* R85   - DC Servo (2) */
-	{ 0x0058, 0x0000 },    /* R88   - DC Servo Readback */
 	{ 0x0059, 0x0000 },    /* R89   - DC Servo (4) */
 	{ 0x0060, 0x0000 },    /* R96   - Analogue HP (1) */
 	{ 0x00C5, 0x0000 },    /* R197  - Class D Test (5) */
 	{ 0x00D0, 0x7600 },    /* R208  - Mic Detect 1 */
 	{ 0x00D1, 0x007F },    /* R209  - Mic Detect 2 */
-	{ 0x00D2, 0x0000 },    /* R210  - Mic Detect 3 */
-	{ 0x0100, 0x0100 },    /* R256  - Chip Revision */
 	{ 0x0101, 0x8004 },    /* R257  - Control Interface */
 	{ 0x0200, 0x0000 },    /* R512  - AIF1 Clocking (1) */
 	{ 0x0201, 0x0000 },    /* R513  - AIF1 Clocking (2) */
@@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x0209, 0x0000 },    /* R521  - Clocking (2) */
 	{ 0x0210, 0x0083 },    /* R528  - AIF1 Rate */
 	{ 0x0211, 0x0083 },    /* R529  - AIF2 Rate */
-	{ 0x0212, 0x0000 },    /* R530  - Rate Status */
 	{ 0x0220, 0x0000 },    /* R544  - FLL1 Control (1) */
 	{ 0x0221, 0x0000 },    /* R545  - FLL1 Control (2) */
 	{ 0x0222, 0x0000 },    /* R546  - FLL1 Control (3) */
@@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = {
 	{ 0x070A, 0xA101 },    /* R1802 - GPIO 11 */
 	{ 0x0720, 0x0000 },    /* R1824 - Pull Control (1) */
 	{ 0x0721, 0x0156 },    /* R1825 - Pull Control (2) */
-	{ 0x0730, 0x0000 },    /* R1840 - Interrupt Status 1 */
-	{ 0x0731, 0x0000 },    /* R1841 - Interrupt Status 2 */
 	{ 0x0732, 0x0000 },    /* R1842 - Interrupt Raw Status 2 */
 	{ 0x0738, 0x07FF },    /* R1848 - Interrupt Status 1 Mask */
 	{ 0x0739, 0xDFEF },    /* R1849 - Interrupt Status 2 Mask */
@@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = {
 };
 
 static struct reg_default wm8994_defaults[] = {
-	{ 0x0000, 0x8994 },    /* R0     - Software Reset */ 
 	{ 0x0001, 0x0000 },    /* R1     - Power Management (1) */ 
 	{ 0x0002, 0x6000 },    /* R2     - Power Management (2) */ 
 	{ 0x0003, 0x0000 },    /* R3     - Power Management (3) */ 
@@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x003C, 0x0003 },    /* R60    - LDO 2 */ 
 	{ 0x004C, 0x1F25 },    /* R76    - Charge Pump (1) */ 
 	{ 0x0051, 0x0004 },    /* R81    - Class W (1) */ 
-	{ 0x0054, 0x0000 },    /* R84    - DC Servo (1) */ 
 	{ 0x0055, 0x054A },    /* R85    - DC Servo (2) */ 
 	{ 0x0057, 0x0000 },    /* R87    - DC Servo (4) */ 
-	{ 0x0058, 0x0000 },    /* R88    - DC Servo Readback */ 
 	{ 0x0060, 0x0000 },    /* R96    - Analogue HP (1) */ 
-	{ 0x0100, 0x0003 },    /* R256   - Chip Revision */ 
 	{ 0x0101, 0x8004 },    /* R257   - Control Interface */ 
 	{ 0x0110, 0x0000 },    /* R272   - Write Sequencer Ctrl (1) */ 
 	{ 0x0111, 0x0000 },    /* R273   - Write Sequencer Ctrl (2) */ 
@@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x0209, 0x0000 },    /* R521   - Clocking (2) */ 
 	{ 0x0210, 0x0083 },    /* R528   - AIF1 Rate */ 
 	{ 0x0211, 0x0083 },    /* R529   - AIF2 Rate */ 
-	{ 0x0212, 0x0000 },    /* R530   - Rate Status */ 
 	{ 0x0220, 0x0000 },    /* R544   - FLL1 Control (1) */ 
 	{ 0x0221, 0x0000 },    /* R545   - FLL1 Control (2) */ 
 	{ 0x0222, 0x0000 },    /* R546   - FLL1 Control (3) */ 
@@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = {
 	{ 0x070A, 0xA101 },    /* R1802  - GPIO 11 */ 
 	{ 0x0720, 0x0000 },    /* R1824  - Pull Control (1) */ 
 	{ 0x0721, 0x0156 },    /* R1825  - Pull Control (2) */ 
-	{ 0x0730, 0x0000 },    /* R1840  - Interrupt Status 1 */ 
-	{ 0x0731, 0x0000 },    /* R1841  - Interrupt Status 2 */ 
-	{ 0x0732, 0x0000 },    /* R1842  - Interrupt Raw Status 2 */ 
 	{ 0x0738, 0x07FF },    /* R1848  - Interrupt Status 1 Mask */ 
 	{ 0x0739, 0xFFFF },    /* R1849  - Interrupt Status 2 Mask */ 
 	{ 0x0740, 0x0000 },    /* R1856  - Interrupt Control */ 
@@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = {
 };
 
 static struct reg_default wm8958_defaults[] = {
-	{ 0x0000, 0x8958 },    /* R0     - Software Reset */ 
 	{ 0x0001, 0x0000 },    /* R1     - Power Management (1) */
 	{ 0x0002, 0x6000 },    /* R2     - Power Management (2) */
 	{ 0x0003, 0x0000 },    /* R3     - Power Management (3) */
@@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case WM8994_DC_SERVO_READBACK:
+	case WM8994_MICBIAS:
 	case WM8994_WRITE_SEQUENCER_CTRL_1:
 	case WM8994_WRITE_SEQUENCER_CTRL_2:
 	case WM8994_AIF1_ADC2_LEFT_VOLUME:
diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index f04761e..afee0e8 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -376,6 +376,9 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
 	schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
 #endif	/* VRTC_CALIBRATION */
+
+	device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 out_rtc:
 	free_irq(info->irq, info);
@@ -401,10 +404,34 @@ static int __devexit pm860x_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
+	return 0;
+}
+static int pm860x_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
+
 static struct platform_driver pm860x_rtc_driver = {
 	.driver		= {
 		.name	= "88pm860x-rtc",
 		.owner	= THIS_MODULE,
+		.pm	= &pm860x_rtc_pm_ops,
 	},
 	.probe		= pm860x_rtc_probe,
 	.remove		= __devexit_p(pm860x_rtc_remove),
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 915943a..f49181c 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -67,6 +67,28 @@ static inline int wled_idc(int port)
 	return ret;
 }
 
+static int backlight_power_set(struct pm860x_chip *chip, int port,
+		int on)
+{
+	int ret = -EINVAL;
+
+	switch (port) {
+	case PM8606_BACKLIGHT1:
+		ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) :
+			pm8606_osc_disable(chip, WLED1_DUTY);
+		break;
+	case PM8606_BACKLIGHT2:
+		ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) :
+			pm8606_osc_disable(chip, WLED2_DUTY);
+		break;
+	case PM8606_BACKLIGHT3:
+		ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) :
+			pm8606_osc_disable(chip, WLED3_DUTY);
+		break;
+	}
+	return ret;
+}
+
 static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 {
 	struct pm860x_backlight_data *data = bl_get_data(bl);
@@ -79,6 +101,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 	else
 		value = brightness;
 
+	if (brightness)
+		backlight_power_set(chip, data->port, 1);
+
 	ret = pm860x_reg_write(data->i2c, wled_a(data->port), value);
 	if (ret < 0)
 		goto out;
@@ -115,6 +140,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 	if (ret < 0)
 		goto out;
 
+	if (brightness == 0)
+		backlight_power_set(chip, data->port, 0);
+
 	dev_dbg(chip->dev, "set brightness %d\n", value);
 	data->current_brightness = value;
 	return 0;
@@ -170,7 +198,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	struct backlight_device *bl;
 	struct resource *res;
 	struct backlight_properties props;
-	unsigned char value;
 	char name[MFD_NAME_SIZE];
 	int ret;
 
@@ -217,26 +244,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bl);
 
-	/* Enable reference VSYS */
-	ret = pm860x_reg_read(data->i2c, PM8606_VSYS);
-	if (ret < 0)
-		goto out;
-	if ((ret & PM8606_VSYS_EN) == 0) {
-		value = ret | PM8606_VSYS_EN;
-		ret = pm860x_reg_write(data->i2c, PM8606_VSYS, value);
-		if (ret < 0)
-			goto out;
-	}
-	/* Enable reference OSC */
-	ret = pm860x_reg_read(data->i2c, PM8606_MISC);
-	if (ret < 0)
-		goto out;
-	if ((ret & PM8606_MISC_OSC_EN) == 0) {
-		value = ret | PM8606_MISC_OSC_EN;
-		ret = pm860x_reg_write(data->i2c, PM8606_MISC, value);
-		if (ret < 0)
-			goto out;
-	}
 	/* read current backlight */
 	ret = pm860x_backlight_get_brightness(bl);
 	if (ret < 0)
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7fcab23..2463b61 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -761,7 +761,7 @@ struct twl_regulator_driver_data {
 
 /*----------------------------------------------------------------------*/
 
-int twl4030_sih_setup(int module);
+int twl4030_sih_setup(struct device *dev, int module, int irq_base);
 
 /* Offsets to Power Registers */
 #define TWL4030_VDAC_DEV_GRP		0x3B
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 92be3476..84d071a 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -263,6 +263,22 @@ enum {
 #define PM8607_PD_PREBIAS_MASK		(0x1F << 0)
 #define PM8607_PD_PRECHG_MASK		(7 << 5)
 
+#define PM8606_REF_GP_OSC_OFF         0
+#define PM8606_REF_GP_OSC_ON          1
+#define PM8606_REF_GP_OSC_UNKNOWN     2
+
+/* Clients of reference group and 8MHz oscillator in 88PM8606 */
+enum pm8606_ref_gp_and_osc_clients {
+	REF_GP_NO_CLIENTS       = 0,
+	WLED1_DUTY              = (1<<0), /*PF 0x02.7:0*/
+	WLED2_DUTY              = (1<<1), /*PF 0x04.7:0*/
+	WLED3_DUTY              = (1<<2), /*PF 0x06.7:0*/
+	RGB1_ENABLE             = (1<<3), /*PF 0x07.1*/
+	RGB2_ENABLE             = (1<<4), /*PF 0x07.2*/
+	LDO_VBR_EN              = (1<<5), /*PF 0x12.0*/
+	REF_GP_MAX_CLIENT       = 0xFFFF
+};
+
 /* Interrupt Number in 88PM8607 */
 enum {
 	PM8607_IRQ_ONKEY,
@@ -298,6 +314,7 @@ enum {
 struct pm860x_chip {
 	struct device		*dev;
 	struct mutex		irq_lock;
+	struct mutex		osc_lock;
 	struct i2c_client	*client;
 	struct i2c_client	*companion;	/* companion chip client */
 	struct regmap           *regmap;
@@ -305,12 +322,15 @@ struct pm860x_chip {
 
 	int			buck3_double;	/* DVC ramp slope double */
 	unsigned short		companion_addr;
+	unsigned short		osc_vote;
 	int			id;
 	int			irq_mode;
 	int			irq_base;
 	int			core_irq;
 	unsigned char		chip_version;
+	unsigned char		osc_status;
 
+	unsigned int            wakeup_flag;
 };
 
 enum {
@@ -369,6 +389,9 @@ struct pm860x_platform_data {
 	int		num_regulators;
 };
 
+extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short);
+extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short);
+
 extern int pm860x_reg_read(struct i2c_client *, int);
 extern int pm860x_reg_write(struct i2c_client *, int, unsigned char);
 extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e20dd6e..5fa6974 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -34,13 +34,6 @@ struct device;
 #define AB5500_1_1	0x21
 #define AB5500_2_0	0x24
 
-/* AB8500 CIDs*/
-#define AB8500_CUT1P0	0x10
-#define AB8500_CUT1P1	0x11
-#define AB8500_CUT2P0	0x20
-#define AB8500_CUT3P0	0x30
-#define AB8500_CUT3P3	0x33
-
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
  * these are catenated into a single 32-bit flag in the code
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
index 488a8c9..2387c20 100644
--- a/include/linux/mfd/abx500/ab8500-gpio.h
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -10,12 +10,14 @@
 
 /*
  * Platform data to register a block: only the initial gpio/irq number.
+ * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
+ * registers.
  */
 
 struct ab8500_gpio_platform_data {
 	int gpio_base;
 	u32 irq_base;
-	u8  config_reg[7];
+	u8  config_reg[8];
 };
 
 #endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 10da029..10eb509 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 #define AB8500_SWATCTRL			0x230
 #define AB8500_HIQCLKCTRL		0x232
 #define AB8500_VSIMSYSCLKCTRL		0x233
+#define AB9540_SYSCLK12BUFCTRL		0x234
+#define AB9540_SYSCLK12CONFCTRL		0x235
+#define AB9540_SYSCLK12BUFCTRL2		0x236
+#define AB9540_SYSCLK12BUF1VALID	0x237
+#define AB9540_SYSCLK12BUF2VALID	0x238
+#define AB9540_SYSCLK12BUF3VALID	0x239
+#define AB9540_SYSCLK12BUF4VALID	0x23A
 
 /* Bits */
 #define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
@@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
 #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
 
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
+
+#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
+
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
+
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+
 #endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index dca9439..fccc300 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -12,6 +12,29 @@
 struct device;
 
 /*
+ * AB IC versions
+ *
+ * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
+ * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
+ * print of version string.
+ */
+enum ab8500_version {
+	AB8500_VERSION_AB8500 = 0x0,
+	AB8500_VERSION_AB8505 = 0x1,
+	AB8500_VERSION_AB9540 = 0x2,
+	AB8500_VERSION_AB8540 = 0x3,
+	AB8500_VERSION_UNDEFINED,
+};
+
+/* AB8500 CIDs*/
+#define AB8500_CUTEARLY	0x00
+#define AB8500_CUT1P0	0x10
+#define AB8500_CUT1P1	0x11
+#define AB8500_CUT2P0	0x20
+#define AB8500_CUT3P0	0x30
+#define AB8500_CUT3P3	0x33
+
+/*
  * AB8500 bank addresses
  */
 #define AB8500_SYS_CTRL1_BLOCK	0x1
@@ -37,30 +60,34 @@ struct device;
 
 /*
  * Interrupts
+ * Values used to index into array ab8500_irq_regoffset[] defined in
+ * drivers/mdf/ab8500-core.c
  */
-
-#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0
-#define AB8500_INT_UN_PLUG_TV_DET	1
-#define AB8500_INT_PLUG_TV_DET		2
+/* Definitions for AB8500 and AB9540 */
+/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540 */
+#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540 */
 #define AB8500_INT_TEMP_WARM		3
 #define AB8500_INT_PON_KEY2DB_F		4
 #define AB8500_INT_PON_KEY2DB_R		5
 #define AB8500_INT_PON_KEY1DB_F		6
 #define AB8500_INT_PON_KEY1DB_R		7
+/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
 #define AB8500_INT_BATT_OVV		8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET	10
-#define AB8500_INT_MAIN_CH_PLUG_DET	11
-#define AB8500_INT_USB_ID_DET_F		12
-#define AB8500_INT_USB_ID_DET_R		13
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505 */
+#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505 */
 #define AB8500_INT_VBUS_DET_F		14
 #define AB8500_INT_VBUS_DET_R		15
+/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
 #define AB8500_INT_VBUS_CH_DROP_END	16
 #define AB8500_INT_RTC_60S		17
 #define AB8500_INT_RTC_ALARM		18
 #define AB8500_INT_BAT_CTRL_INDB	20
 #define AB8500_INT_CH_WD_EXP		21
 #define AB8500_INT_VBUS_OVV		22
-#define AB8500_INT_MAIN_CH_DROP_END	23
+#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540 */
+/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
 #define AB8500_INT_CCN_CONV_ACC		24
 #define AB8500_INT_INT_AUD		25
 #define AB8500_INT_CCEOC		26
@@ -69,7 +96,8 @@ struct device;
 #define AB8500_INT_LOW_BAT_R		29
 #define AB8500_INT_BUP_CHG_NOT_OK	30
 #define AB8500_INT_BUP_CHG_OK		31
-#define AB8500_INT_GP_HW_ADC_CONV_END	32
+/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
+#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505 */
 #define AB8500_INT_ACC_DETECT_1DB_F	33
 #define AB8500_INT_ACC_DETECT_1DB_R	34
 #define AB8500_INT_ACC_DETECT_22DB_F	35
@@ -77,38 +105,43 @@ struct device;
 #define AB8500_INT_ACC_DETECT_21DB_F	37
 #define AB8500_INT_ACC_DETECT_21DB_R	38
 #define AB8500_INT_GP_SW_ADC_CONV_END	39
-#define AB8500_INT_GPIO6R		40
-#define AB8500_INT_GPIO7R		41
-#define AB8500_INT_GPIO8R		42
-#define AB8500_INT_GPIO9R		43
+/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
+#define AB8500_INT_GPIO6R		40 /* not 8505/9540 */
+#define AB8500_INT_GPIO7R		41 /* not 8505/9540 */
+#define AB8500_INT_GPIO8R		42 /* not 8505/9540 */
+#define AB8500_INT_GPIO9R		43 /* not 8505/9540 */
 #define AB8500_INT_GPIO10R		44
 #define AB8500_INT_GPIO11R		45
-#define AB8500_INT_GPIO12R		46
+#define AB8500_INT_GPIO12R		46 /* not 8505 */
 #define AB8500_INT_GPIO13R		47
-#define AB8500_INT_GPIO24R		48
-#define AB8500_INT_GPIO25R		49
-#define AB8500_INT_GPIO36R		50
-#define AB8500_INT_GPIO37R		51
-#define AB8500_INT_GPIO38R		52
-#define AB8500_INT_GPIO39R		53
+/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
+#define AB8500_INT_GPIO24R		48 /* not 8505 */
+#define AB8500_INT_GPIO25R		49 /* not 8505 */
+#define AB8500_INT_GPIO36R		50 /* not 8505/9540 */
+#define AB8500_INT_GPIO37R		51 /* not 8505/9540 */
+#define AB8500_INT_GPIO38R		52 /* not 8505/9540 */
+#define AB8500_INT_GPIO39R		53 /* not 8505/9540 */
 #define AB8500_INT_GPIO40R		54
 #define AB8500_INT_GPIO41R		55
-#define AB8500_INT_GPIO6F		56
-#define AB8500_INT_GPIO7F		57
-#define AB8500_INT_GPIO8F		58
-#define AB8500_INT_GPIO9F		59
+/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
+#define AB8500_INT_GPIO6F		56 /* not 8505/9540 */
+#define AB8500_INT_GPIO7F		57 /* not 8505/9540 */
+#define AB8500_INT_GPIO8F		58 /* not 8505/9540 */
+#define AB8500_INT_GPIO9F		59 /* not 8505/9540 */
 #define AB8500_INT_GPIO10F		60
 #define AB8500_INT_GPIO11F		61
-#define AB8500_INT_GPIO12F		62
+#define AB8500_INT_GPIO12F		62 /* not 8505 */
 #define AB8500_INT_GPIO13F		63
-#define AB8500_INT_GPIO24F		64
-#define AB8500_INT_GPIO25F		65
-#define AB8500_INT_GPIO36F		66
-#define AB8500_INT_GPIO37F		67
-#define AB8500_INT_GPIO38F		68
-#define AB8500_INT_GPIO39F		69
+/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
+#define AB8500_INT_GPIO24F		64 /* not 8505 */
+#define AB8500_INT_GPIO25F		65 /* not 8505 */
+#define AB8500_INT_GPIO36F		66 /* not 8505/9540 */
+#define AB8500_INT_GPIO37F		67 /* not 8505/9540 */
+#define AB8500_INT_GPIO38F		68 /* not 8505/9540 */
+#define AB8500_INT_GPIO39F		69 /* not 8505/9540 */
 #define AB8500_INT_GPIO40F		70
 #define AB8500_INT_GPIO41F		71
+/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
 #define AB8500_INT_ADP_SOURCE_ERROR	72
 #define AB8500_INT_ADP_SINK_ERROR	73
 #define AB8500_INT_ADP_PROBE_PLUG	74
@@ -116,30 +149,67 @@ struct device;
 #define AB8500_INT_ADP_SENSE_OFF	76
 #define AB8500_INT_USB_PHY_POWER_ERR	78
 #define AB8500_INT_USB_LINK_STATUS	79
+/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
 #define AB8500_INT_BTEMP_LOW		80
 #define AB8500_INT_BTEMP_LOW_MEDIUM	81
 #define AB8500_INT_BTEMP_MEDIUM_HIGH	82
 #define AB8500_INT_BTEMP_HIGH		83
-#define AB8500_INT_USB_CHARGER_NOT_OK	89
+/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
+#define AB8500_INT_SRP_DETECT		88
+#define AB8500_INT_USB_CHARGER_NOT_OKR	89
 #define AB8500_INT_ID_WAKEUP_R		90
 #define AB8500_INT_ID_DET_R1R		92
 #define AB8500_INT_ID_DET_R2R		93
 #define AB8500_INT_ID_DET_R3R		94
 #define AB8500_INT_ID_DET_R4R		95
+/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
 #define AB8500_INT_ID_WAKEUP_F		96
 #define AB8500_INT_ID_DET_R1F		98
 #define AB8500_INT_ID_DET_R2F		99
 #define AB8500_INT_ID_DET_R3F		100
 #define AB8500_INT_ID_DET_R4F		101
-#define AB8500_INT_USB_CHG_DET_DONE	102
+#define AB8500_INT_CHAUTORESTARTAFTSEC  102
+#define AB8500_INT_CHSTOPBYSEC		103
+/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
 #define AB8500_INT_USB_CH_TH_PROT_F	104
 #define AB8500_INT_USB_CH_TH_PROT_R    105
-#define AB8500_INT_MAIN_CH_TH_PROT_F   106
-#define AB8500_INT_MAIN_CH_TH_PROT_R	107
-#define AB8500_INT_USB_CHARGER_NOT_OKF	111
+#define AB8500_INT_MAIN_CH_TH_PROT_F	106 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_TH_PROT_R	107 /* not 8505/9540 */
+#define AB8500_INT_CHCURLIMNOHSCHIRP	109
+#define AB8500_INT_CHCURLIMHSCHIRP	110
+#define AB8500_INT_XTAL32K_KO		111
+
+/* Definitions for AB9540 */
+/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
+#define AB9540_INT_GPIO50R		113
+#define AB9540_INT_GPIO51R		114 /* not 8505 */
+#define AB9540_INT_GPIO52R		115
+#define AB9540_INT_GPIO53R		116
+#define AB9540_INT_GPIO54R		117 /* not 8505 */
+#define AB9540_INT_IEXT_CH_RF_BFN_R	118
+#define AB9540_INT_IEXT_CH_RF_BFN_F	119
+/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
+#define AB9540_INT_GPIO50F		121
+#define AB9540_INT_GPIO51F		122 /* not 8505 */
+#define AB9540_INT_GPIO52F		123
+#define AB9540_INT_GPIO53F		124
+#define AB9540_INT_GPIO54F		125 /* not 8505 */
 
+/*
+ * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
+ * entire platform. This is a "compile time" constant so this must be set to
+ * the largest possible value that may be encountered with different AB SOCs.
+ * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
+ * which is larger.
+ */
 #define AB8500_NR_IRQS			112
+#define AB8505_NR_IRQS			128
+#define AB9540_NR_IRQS			128
+/* This is set to the roof of any AB8500 chip variant IRQ counts */
+#define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
+
 #define AB8500_NUM_IRQ_REGS		14
+#define AB9540_NUM_IRQ_REGS		17
 
 /**
  * struct ab8500 - ab8500 internal structure
@@ -147,13 +217,18 @@ struct device;
  * @lock: read/write operations lock
  * @irq_lock: genirq bus lock
  * @irq: irq line
+ * @version: chip version id (e.g. ab8500 or ab9540)
  * @chip_id: chip revision id
  * @write: register write
+ * @write_masked: masked register write
  * @read: register read
  * @rx_buf: rx buf for SPI
  * @tx_buf: tx buf for SPI
  * @mask: cache of IRQ regs for bus lock
  * @oldmask: cache of previous IRQ regs for bus lock
+ * @mask_size: Actual number of valid entries in mask[], oldmask[] and
+ * irq_reg_offset
+ * @irq_reg_offset: Array of offsets into IRQ registers
  */
 struct ab8500 {
 	struct device	*dev;
@@ -162,16 +237,20 @@ struct ab8500 {
 
 	int		irq_base;
 	int		irq;
+	enum ab8500_version version;
 	u8		chip_id;
 
-	int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
-	int (*read) (struct ab8500 *a8500, u16 addr);
+	int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
+	int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
+	int (*read)(struct ab8500 *ab8500, u16 addr);
 
 	unsigned long	tx_buf[4];
 	unsigned long	rx_buf[4];
 
-	u8 mask[AB8500_NUM_IRQ_REGS];
-	u8 oldmask[AB8500_NUM_IRQ_REGS];
+	u8 *mask;
+	u8 *oldmask;
+	int mask_size;
+	const int *irq_reg_offset;
 };
 
 struct regulator_reg_init;
@@ -197,7 +276,52 @@ struct ab8500_platform_data {
 	struct ab8500_gpio_platform_data *gpio;
 };
 
-extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devinit ab8500_init(struct ab8500 *ab8500,
+				 enum ab8500_version version);
 extern int __devexit ab8500_exit(struct ab8500 *ab8500);
 
+static inline int is_ab8500(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8500;
+}
+
+static inline int is_ab8505(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8505;
+}
+
+static inline int is_ab9540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB9540;
+}
+
+static inline int is_ab8540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8540;
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
 #endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
new file mode 100644
index 0000000..22c1007
--- /dev/null
+++ b/include/linux/mfd/anatop.h
@@ -0,0 +1,40 @@
+/*
+ * anatop.h - Anatop MFD driver
+ *
+ *  Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ *  Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_ANATOP_H
+#define __LINUX_MFD_ANATOP_H
+
+#include <linux/spinlock.h>
+
+/**
+ * anatop - MFD data
+ * @ioreg: ioremap register
+ * @reglock: spinlock for register read/write
+ */
+struct anatop {
+	void *ioreg;
+	spinlock_t reglock;
+};
+
+extern u32 anatop_get_bits(struct anatop *, u32, int, int);
+extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
+
+#endif /*  __LINUX_MFD_ANATOP_H */
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 5702d1b..7ffbd6e 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -76,8 +76,6 @@ enum da9052_chip_id {
 struct da9052_pdata;
 
 struct da9052 {
-	struct mutex io_lock;
-
 	struct device *dev;
 	struct regmap *regmap;
 
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 60d27f7..b3a43b1 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,6 +11,24 @@
 #define __MFD_DB8500_PRCMU_H
 
 #include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+/*
+ * Registers
+ */
+#define DB8500_PRCM_GPIOCR 0x138
+#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
+#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
+#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
+#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
+
+#define DB8500_PRCM_LINE_VALUE 0x170
+#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
+
+#define DB8500_PRCM_DSI_SW_RESET 0x324
+#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
 
 /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
 
@@ -421,40 +439,22 @@ enum auto_enable {
 /* End of file previously known as prcmu-fw-defs_v1.h */
 
 /**
- * enum hw_acc_dev - enum for hw accelerators
- * @HW_ACC_SVAMMDSP: for SVAMMDSP
- * @HW_ACC_SVAPIPE:  for SVAPIPE
- * @HW_ACC_SIAMMDSP: for SIAMMDSP
- * @HW_ACC_SIAPIPE: for SIAPIPE
- * @HW_ACC_SGA: for SGA
- * @HW_ACC_B2R2: for B2R2
- * @HW_ACC_MCDE: for MCDE
- * @HW_ACC_ESRAM1: for ESRAM1
- * @HW_ACC_ESRAM2: for ESRAM2
- * @HW_ACC_ESRAM3: for ESRAM3
- * @HW_ACC_ESRAM4: for ESRAM4
- * @NUM_HW_ACC: number of hardware accelerators
- *
- * Different hw accelerators which can be turned ON/
- * OFF or put into retention (MMDSPs and ESRAMs).
- * Used with EPOD API.
+ * enum prcmu_power_status - results from set_power_state
+ * @PRCMU_SLEEP_OK: Sleep went ok
+ * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
+ * @PRCMU_IDLE_OK: Idle went ok
+ * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
+ * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
+ * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
  *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator API.
  */
-enum hw_acc_dev {
-	HW_ACC_SVAMMDSP,
-	HW_ACC_SVAPIPE,
-	HW_ACC_SIAMMDSP,
-	HW_ACC_SIAPIPE,
-	HW_ACC_SGA,
-	HW_ACC_B2R2,
-	HW_ACC_MCDE,
-	HW_ACC_ESRAM1,
-	HW_ACC_ESRAM2,
-	HW_ACC_ESRAM3,
-	HW_ACC_ESRAM4,
-	NUM_HW_ACC
+enum prcmu_power_status {
+	PRCMU_SLEEP_OK			= 0xf3,
+	PRCMU_DEEP_SLEEP_OK		= 0xf6,
+	PRCMU_IDLE_OK			= 0xf0,
+	PRCMU_DEEPIDLE_OK		= 0xe3,
+	PRCMU_PRCMU2ARMPENDINGIT_ER	= 0x91,
+	PRCMU_ARMPENDINGIT_ER		= 0x93,
 };
 
 /*
@@ -493,6 +493,20 @@ struct prcmu_auto_pm_config {
 	u8 sva_policy;
 };
 
+#define PRCMU_FW_PROJECT_U8500		2
+#define PRCMU_FW_PROJECT_U9500		4
+#define PRCMU_FW_PROJECT_U8500_C2	7
+#define PRCMU_FW_PROJECT_U9500_C2	11
+#define PRCMU_FW_PROJECT_U8520		13
+#define PRCMU_FW_PROJECT_U8420		14
+
+struct prcmu_fw_version {
+	u8 project;
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+};
+
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
 void db8500_prcmu_early_init(void);
@@ -500,42 +514,41 @@ int prcmu_set_rc_a2p(enum romcode_write);
 enum romcode_read prcmu_get_rc_p2a(void);
 enum ap_pwrst prcmu_get_xp70_current_state(void);
 bool prcmu_has_arm_maxopp(void);
-bool prcmu_is_u8400(void);
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
+struct prcmu_fw_version *prcmu_get_fw_version(void);
 int prcmu_request_ape_opp_100_voltage(bool enable);
 int prcmu_release_usb_wakeup_state(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
-/* NOTE! Use regulator framework instead */
-int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle);
 bool prcmu_is_auto_pm_enabled(void);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
 int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_hotdog(u8 threshold);
-int prcmu_config_hotmon(u8 low, u8 high);
-int prcmu_start_temp_sense(u16 cycles32k);
-int prcmu_stop_temp_sense(void);
+int db8500_prcmu_config_hotdog(u8 threshold);
+int db8500_prcmu_config_hotmon(u8 low, u8 high);
+int db8500_prcmu_start_temp_sense(u16 cycles32k);
+int db8500_prcmu_stop_temp_sense(void);
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
-void prcmu_enable_spi2(void);
-void prcmu_disable_spi2(void);
+void db8500_prcmu_modem_reset(void);
 
-int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
-int prcmu_enable_a9wdog(u8 id);
-int prcmu_disable_a9wdog(u8 id);
-int prcmu_kick_a9wdog(u8 id);
-int prcmu_load_a9wdog(u8 id, u32 val);
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int db8500_prcmu_enable_a9wdog(u8 id);
+int db8500_prcmu_disable_a9wdog(u8 id);
+int db8500_prcmu_kick_a9wdog(u8 id);
+int db8500_prcmu_load_a9wdog(u8 id, u32 val);
 
 void db8500_prcmu_system_reset(u16 reset_code);
 int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+u8 db8500_prcmu_get_power_state_result(void);
+int db8500_prcmu_gic_decouple(void);
+int db8500_prcmu_gic_recouple(void);
+int db8500_prcmu_copy_gic_settings(void);
+bool db8500_prcmu_gic_pending_irq(void);
+bool db8500_prcmu_pending_irq(void);
+bool db8500_prcmu_is_cpu_in_wfi(int cpu);
 void db8500_prcmu_enable_wakeups(u32 wakeups);
 int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
 int db8500_prcmu_request_clock(u8 clock, bool enable);
@@ -549,6 +562,14 @@ u16 db8500_prcmu_get_reset_code(void);
 bool db8500_prcmu_is_ac_wake_requested(void);
 int db8500_prcmu_set_arm_opp(u8 opp);
 int db8500_prcmu_get_arm_opp(void);
+int db8500_prcmu_set_ape_opp(u8 opp);
+int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_set_ddr_opp(u8 opp);
+int db8500_prcmu_get_ddr_opp(void);
+
+u32 db8500_prcmu_read(unsigned int reg);
+void db8500_prcmu_write(unsigned int reg, u32 value);
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
 
 #else /* !CONFIG_MFD_DB8500_PRCMU */
 
@@ -574,17 +595,17 @@ static inline bool prcmu_has_arm_maxopp(void)
 	return false;
 }
 
-static inline bool prcmu_is_u8400(void)
+static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
 {
-	return false;
+	return NULL;
 }
 
-static inline int prcmu_set_ape_opp(u8 opp)
+static inline int db8500_prcmu_set_ape_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int prcmu_get_ape_opp(void)
+static inline int db8500_prcmu_get_ape_opp(void)
 {
 	return APE_100_OPP;
 }
@@ -599,21 +620,16 @@ static inline int prcmu_release_usb_wakeup_state(void)
 	return 0;
 }
 
-static inline int prcmu_set_ddr_opp(u8 opp)
+static inline int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int prcmu_get_ddr_opp(void)
+static inline int db8500_prcmu_get_ddr_opp(void)
 {
 	return DDR_100_OPP;
 }
 
-static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
-{
-	return 0;
-}
-
 static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle)
 {
@@ -634,22 +650,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
 	return 0;
 }
 
-static inline int prcmu_config_hotdog(u8 threshold)
+static inline int db8500_prcmu_config_hotdog(u8 threshold)
 {
 	return 0;
 }
 
-static inline int prcmu_config_hotmon(u8 low, u8 high)
+static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
 {
 	return 0;
 }
 
-static inline int prcmu_start_temp_sense(u16 cycles32k)
+static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
 {
 	return 0;
 }
 
-static inline int prcmu_stop_temp_sense(void)
+static inline int db8500_prcmu_stop_temp_sense(void)
 {
 	return 0;
 }
@@ -668,22 +684,17 @@ static inline void prcmu_ac_wake_req(void) {}
 
 static inline void prcmu_ac_sleep_req(void) {}
 
-static inline void prcmu_modem_reset(void) {}
+static inline void db8500_prcmu_modem_reset(void) {}
 
-static inline int prcmu_enable_spi2(void)
-{
-	return 0;
-}
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
 
-static inline int prcmu_disable_spi2(void)
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
 {
 	return 0;
 }
 
-static inline void db8500_prcmu_system_reset(u16 reset_code) {}
-
-static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
+static inline u8 db8500_prcmu_get_power_state_result(void)
 {
 	return 0;
 }
@@ -729,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void)
 	return 0;
 }
 
-static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 {
 	return 0;
 }
 
-static inline int prcmu_enable_a9wdog(u8 id)
+static inline int db8500_prcmu_enable_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_disable_a9wdog(u8 id)
+static inline int db8500_prcmu_disable_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_kick_a9wdog(u8 id)
+static inline int db8500_prcmu_kick_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_load_a9wdog(u8 id, u32 val)
+static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
 {
 	return 0;
 }
@@ -769,6 +780,16 @@ static inline int db8500_prcmu_get_arm_opp(void)
 	return 0;
 }
 
+static inline u32 db8500_prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
+	u32 value) {}
+
 #endif /* !CONFIG_MFD_DB8500_PRCMU */
 
 #endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index bac942f..d7674eb 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -10,7 +10,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
-#include <asm/mach-types.h>
+#include <linux/err.h>
 
 /* PRCMU Wakeup defines */
 enum prcmu_wakeup_index {
@@ -80,6 +80,29 @@ enum prcmu_wakeup_index {
 #define EPOD_STATE_ON_CLK_OFF	0x03
 #define EPOD_STATE_ON		0x04
 
+/* DB5500 CLKOUT IDs */
+enum {
+	DB5500_CLKOUT0 = 0,
+	DB5500_CLKOUT1,
+};
+
+/* DB5500 CLKOUTx sources */
+enum {
+	DB5500_CLKOUT_REF_CLK_SEL0,
+	DB5500_CLKOUT_RTC_CLK0_SEL0,
+	DB5500_CLKOUT_ULP_CLK_SEL0,
+	DB5500_CLKOUT_STATIC0,
+	DB5500_CLKOUT_REFCLK,
+	DB5500_CLKOUT_ULPCLK,
+	DB5500_CLKOUT_ARMCLK,
+	DB5500_CLKOUT_SYSACC0CLK,
+	DB5500_CLKOUT_SOC0PLLCLK,
+	DB5500_CLKOUT_SOC1PLLCLK,
+	DB5500_CLKOUT_DDRPLLCLK,
+	DB5500_CLKOUT_TVCLK,
+	DB5500_CLKOUT_IRDACLK,
+};
+
 /*
  * CLKOUT sources
  */
@@ -111,6 +134,7 @@ enum prcmu_clock {
 	PRCMU_MSP1CLK,
 	PRCMU_I2CCLK,
 	PRCMU_SDMMCCLK,
+	PRCMU_SPARE1CLK,
 	PRCMU_SLIMCLK,
 	PRCMU_PER1CLK,
 	PRCMU_PER2CLK,
@@ -139,12 +163,20 @@ enum prcmu_clock {
 	PRCMU_IRRCCLK,
 	PRCMU_SIACLK,
 	PRCMU_SVACLK,
+	PRCMU_ACLK,
 	PRCMU_NUM_REG_CLOCKS,
 	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+	PRCMU_CDCLK,
 	PRCMU_TIMCLK,
 	PRCMU_PLLSOC0,
 	PRCMU_PLLSOC1,
 	PRCMU_PLLDDR,
+	PRCMU_PLLDSI,
+	PRCMU_DSI0CLK,
+	PRCMU_DSI1CLK,
+	PRCMU_DSI0ESCCLK,
+	PRCMU_DSI1ESCCLK,
+	PRCMU_DSI2ESCCLK,
 };
 
 /**
@@ -153,12 +185,14 @@ enum prcmu_clock {
  * @APE_NO_CHANGE: The APE operating point is unchanged
  * @APE_100_OPP: The new APE operating point is ape100opp
  * @APE_50_OPP: 50%
+ * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
  */
 enum ape_opp {
 	APE_OPP_INIT = 0x00,
 	APE_NO_CHANGE = 0x01,
 	APE_100_OPP = 0x02,
-	APE_50_OPP = 0x03
+	APE_50_OPP = 0x03,
+	APE_50_PARTLY_25_OPP = 0xFF,
 };
 
 /**
@@ -218,9 +252,11 @@ enum ddr_pwrst {
 
 #if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
 
+#include <mach/id.h>
+
 static inline void __init prcmu_early_init(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_early_init();
 	else
 		return db8500_prcmu_early_init();
@@ -229,7 +265,7 @@ static inline void __init prcmu_early_init(void)
 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 		bool keep_ap_pll)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_set_power_state(state, keep_ulp_clk,
 			keep_ap_pll);
 	else
@@ -237,9 +273,65 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 			keep_ap_pll);
 }
 
+static inline u8 prcmu_get_power_state_result(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_power_state_result();
+}
+
+static inline int prcmu_gic_decouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_decouple();
+}
+
+static inline int prcmu_gic_recouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_recouple();
+}
+
+static inline bool prcmu_gic_pending_irq(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_pending_irq();
+}
+
+static inline bool prcmu_is_cpu_in_wfi(int cpu)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_is_cpu_in_wfi(cpu);
+}
+
+static inline int prcmu_copy_gic_settings(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_copy_gic_settings();
+}
+
+static inline bool prcmu_pending_irq(void)
+{
+        if (cpu_is_u5500())
+                return -EINVAL;
+        else
+                return db8500_prcmu_pending_irq();
+}
+
 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_set_epod(epod_id, epod_state);
@@ -247,7 +339,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 
 static inline void prcmu_enable_wakeups(u32 wakeups)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_enable_wakeups(wakeups);
 	else
 		db8500_prcmu_enable_wakeups(wakeups);
@@ -260,7 +352,7 @@ static inline void prcmu_disable_wakeups(void)
 
 static inline void prcmu_config_abb_event_readout(u32 abb_events)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_config_abb_event_readout(abb_events);
 	else
 		db8500_prcmu_config_abb_event_readout(abb_events);
@@ -268,7 +360,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events)
 
 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_get_abb_event_buffer(buf);
 	else
 		db8500_prcmu_get_abb_event_buffer(buf);
@@ -276,25 +368,40 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
 
 static inline int prcmu_request_clock(u8 clock, bool enable)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_request_clock(clock, enable);
 	else
 		return db8500_prcmu_request_clock(clock, enable);
 }
 
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
+unsigned long prcmu_clock_rate(u8 clock);
+long prcmu_round_clock_rate(u8 clock, unsigned long rate);
+int prcmu_set_clock_rate(u8 clock, unsigned long rate);
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ddr_opp(opp);
+}
+static inline int prcmu_get_ddr_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ddr_opp();
+}
 
 static inline int prcmu_set_arm_opp(u8 opp)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_set_arm_opp(opp);
@@ -302,15 +409,31 @@ static inline int prcmu_set_arm_opp(u8 opp)
 
 static inline int prcmu_get_arm_opp(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_get_arm_opp();
 }
 
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ape_opp(opp);
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ape_opp();
+}
+
 static inline void prcmu_system_reset(u16 reset_code)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_system_reset(reset_code);
 	else
 		return db8500_prcmu_system_reset(reset_code);
@@ -318,7 +441,7 @@ static inline void prcmu_system_reset(u16 reset_code)
 
 static inline u16 prcmu_get_reset_code(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_get_reset_code();
 	else
 		return db8500_prcmu_get_reset_code();
@@ -326,10 +449,17 @@ static inline u16 prcmu_get_reset_code(void)
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
+static inline void prcmu_modem_reset(void)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		return db8500_prcmu_modem_reset();
+}
+
 static inline bool prcmu_is_ac_wake_requested(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_is_ac_wake_requested();
 	else
 		return db8500_prcmu_is_ac_wake_requested();
@@ -337,7 +467,7 @@ static inline bool prcmu_is_ac_wake_requested(void)
 
 static inline int prcmu_set_display_clocks(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_set_display_clocks();
 	else
 		return db8500_prcmu_set_display_clocks();
@@ -345,7 +475,7 @@ static inline int prcmu_set_display_clocks(void)
 
 static inline int prcmu_disable_dsipll(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_disable_dsipll();
 	else
 		return db8500_prcmu_disable_dsipll();
@@ -353,7 +483,7 @@ static inline int prcmu_disable_dsipll(void)
 
 static inline int prcmu_enable_dsipll(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_enable_dsipll();
 	else
 		return db8500_prcmu_enable_dsipll();
@@ -361,11 +491,107 @@ static inline int prcmu_enable_dsipll(void)
 
 static inline int prcmu_config_esram0_deep_sleep(u8 state)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_config_esram0_deep_sleep(state);
 }
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotdog(threshold);
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotmon(low, high);
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_start_temp_sense(cycles32k);
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_stop_temp_sense();
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_read(reg);
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write(reg, value);
+}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write_masked(reg, mask, value);
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_enable_a9wdog(id);
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_disable_a9wdog(id);
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_kick_a9wdog(id);
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_load_a9wdog(id, timeout);
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+}
 #else
 
 static inline void __init prcmu_early_init(void) {}
@@ -395,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 	return -ENOSYS;
 }
 
+static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
+	u8 size)
+{
+	return -ENOSYS;
+}
+
 static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 {
 	return 0;
@@ -405,6 +637,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable)
 	return 0;
 }
 
+static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline unsigned long prcmu_clock_rate(u8 clock)
+{
+	return 0;
+}
+
 static inline int prcmu_set_ape_opp(u8 opp)
 {
 	return 0;
@@ -480,14 +727,133 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 	*buf = NULL;
 }
 
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	return 0;
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	return 0;
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	return 0;
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	return 0;
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
+
+#endif
+
+static inline void prcmu_set(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, bits);
+}
+
+static inline void prcmu_clear(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, 0);
+}
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_enable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_disable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_enable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_disable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_enable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+/**
+ * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_disable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+#else
+
+static inline void prcmu_enable_spi2(void) {}
+static inline void prcmu_disable_spi2(void) {}
+static inline void prcmu_enable_stm_mod_uart(void) {}
+static inline void prcmu_disable_stm_mod_uart(void) {}
+static inline void prcmu_enable_stm_ape(void) {}
+static inline void prcmu_disable_stm_ape(void) {}
+
 #endif
 
 /* PRCMU QoS APE OPP class */
 #define PRCMU_QOS_APE_OPP 1
 #define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_ARM_OPP 3
 #define PRCMU_QOS_DEFAULT_VALUE -1
 
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
 
 unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
 void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index b86ee45..10e038b 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
 
 int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
-		unsigned int mode, unsigned int channel, unsigned int *sample);
+		unsigned int mode, unsigned int channel,
+		u8 ato, bool atox, unsigned int *sample);
 
 #define MC13XXX_IRQ_ADCDONE	0
 #define MC13XXX_IRQ_ADCBISDONE	1
@@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data {
 	unsigned short b3on_key;
 };
 
+struct mc13xxx_ts_platform_data {
+	/* Delay between Touchscreen polarization and ADC Conversion.
+	 * Given in clock ticks of a 32 kHz clock which gives a granularity of
+	 * about 30.5ms */
+	u8 ato;
+
+#define MC13783_TS_ATO_FIRST false
+#define MC13783_TS_ATO_EACH  true
+	/* Use the ATO delay only for the first conversion or for each one */
+	bool atox;
+};
+
 struct mc13xxx_platform_data {
 #define MC13XXX_USE_TOUCHSCREEN (1 << 0)
 #define MC13XXX_USE_CODEC	(1 << 1)
@@ -167,6 +180,7 @@ struct mc13xxx_platform_data {
 	struct mc13xxx_regulator_platform_data regulators;
 	struct mc13xxx_leds_platform_data *leds;
 	struct mc13xxx_buttons_platform_data *buttons;
+	struct mc13xxx_ts_platform_data touch;
 };
 
 #define MC13XXX_ADC_MODE_TS		1
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
new file mode 100644
index 0000000..a2c6160
--- /dev/null
+++ b/include/linux/mfd/rc5t583.h
@@ -0,0 +1,295 @@
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS		0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT		5
+#define RC5T583_MAX_GPEDGE_REG		2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS	9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1	0x19
+#define RC5T583_INT_EN_SYS2	0x1D
+#define RC5T583_INT_EN_DCDC	0x41
+#define RC5T583_INT_EN_RTC	0xED
+#define RC5T583_INT_EN_ADC1	0x90
+#define RC5T583_INT_EN_ADC2	0x91
+#define RC5T583_INT_EN_ADC3	0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL	0xAD
+#define RC5T583_INTC_INTEN	0xAE
+#define RC5T583_INTC_INTMON	0xAF
+
+#define RC5T583_INT_MON_GRP	0xAF
+#define RC5T583_INT_MON_SYS1	0x1B
+#define RC5T583_INT_MON_SYS2	0x1F
+#define RC5T583_INT_MON_DCDC	0x43
+#define RC5T583_INT_MON_RTC	0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1	0x1A
+#define RC5T583_INT_IR_SYS2	0x1E
+#define RC5T583_INT_IR_DCDC	0x42
+#define RC5T583_INT_IR_RTC	0xEE
+#define RC5T583_INT_IR_ADCL	0x94
+#define RC5T583_INT_IR_ADCH	0x95
+#define RC5T583_INT_IR_ADCEND	0x96
+#define RC5T583_INT_IR_GPIOR	0xA9
+#define RC5T583_INT_IR_GPIOF	0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1		0x21
+#define RC5T583_SLPSEQ2		0x22
+#define RC5T583_SLPSEQ3		0x23
+#define RC5T583_SLPSEQ4		0x24
+#define RC5T583_SLPSEQ5		0x25
+#define RC5T583_SLPSEQ6		0x26
+#define RC5T583_SLPSEQ7		0x27
+#define RC5T583_SLPSEQ8		0x28
+#define RC5T583_SLPSEQ9		0x29
+#define RC5T583_SLPSEQ10	0x2A
+#define RC5T583_SLPSEQ11	0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL	0x30
+#define RC5T583_REG_DC0DAC	0x31
+#define RC5T583_REG_DC0LATCTL	0x32
+#define RC5T583_REG_SR0CTL	0x33
+
+#define RC5T583_REG_DC1CTL	0x34
+#define RC5T583_REG_DC1DAC	0x35
+#define RC5T583_REG_DC1LATCTL	0x36
+#define RC5T583_REG_SR1CTL	0x37
+
+#define RC5T583_REG_DC2CTL	0x38
+#define RC5T583_REG_DC2DAC	0x39
+#define RC5T583_REG_DC2LATCTL	0x3A
+#define RC5T583_REG_SR2CTL	0x3B
+
+#define RC5T583_REG_DC3CTL	0x3C
+#define RC5T583_REG_DC3DAC	0x3D
+#define RC5T583_REG_DC3LATCTL	0x3E
+#define RC5T583_REG_SR3CTL	0x3F
+
+
+#define RC5T583_REG_LDOEN1	0x50
+#define RC5T583_REG_LDOEN2	0x51
+#define RC5T583_REG_LDODIS1	0x52
+#define RC5T583_REG_LDODIS2	0x53
+
+#define RC5T583_REG_LDO0DAC	0x54
+#define RC5T583_REG_LDO1DAC	0x55
+#define RC5T583_REG_LDO2DAC	0x56
+#define RC5T583_REG_LDO3DAC	0x57
+#define RC5T583_REG_LDO4DAC	0x58
+#define RC5T583_REG_LDO5DAC	0x59
+#define RC5T583_REG_LDO6DAC	0x5A
+#define RC5T583_REG_LDO7DAC	0x5B
+#define RC5T583_REG_LDO8DAC	0x5C
+#define RC5T583_REG_LDO9DAC	0x5D
+
+#define RC5T583_REG_DC0DAC_DS	0x60
+#define RC5T583_REG_DC1DAC_DS	0x61
+#define RC5T583_REG_DC2DAC_DS	0x62
+#define RC5T583_REG_DC3DAC_DS	0x63
+
+#define RC5T583_REG_LDO0DAC_DS	0x64
+#define RC5T583_REG_LDO1DAC_DS	0x65
+#define RC5T583_REG_LDO2DAC_DS	0x66
+#define RC5T583_REG_LDO3DAC_DS	0x67
+#define RC5T583_REG_LDO4DAC_DS	0x68
+#define RC5T583_REG_LDO5DAC_DS	0x69
+#define RC5T583_REG_LDO6DAC_DS	0x6A
+#define RC5T583_REG_LDO7DAC_DS	0x6B
+#define RC5T583_REG_LDO8DAC_DS	0x6C
+#define RC5T583_REG_LDO9DAC_DS	0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL	0xA0
+#define RC5T583_GPIO_PDEN	0xA1
+#define RC5T583_GPIO_IOOUT	0xA2
+#define RC5T583_GPIO_PGSEL	0xA3
+#define RC5T583_GPIO_GPINV	0xA4
+#define RC5T583_GPIO_GPDEB	0xA5
+#define RC5T583_GPIO_GPEDGE1	0xA6
+#define RC5T583_GPIO_GPEDGE2	0xA7
+#define RC5T583_GPIO_EN_INT	0xA8
+#define RC5T583_GPIO_MON_IOIN	0xAB
+#define RC5T583_GPIO_GPOFUNC	0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+	RC5T583_IRQ_ONKEY,
+	RC5T583_IRQ_ACOK,
+	RC5T583_IRQ_LIDOPEN,
+	RC5T583_IRQ_PREOT,
+	RC5T583_IRQ_CLKSTP,
+	RC5T583_IRQ_ONKEY_OFF,
+	RC5T583_IRQ_WD,
+	RC5T583_IRQ_EN_PWRREQ1,
+	RC5T583_IRQ_EN_PWRREQ2,
+	RC5T583_IRQ_PRE_VINDET,
+
+	RC5T583_IRQ_DC0LIM,
+	RC5T583_IRQ_DC1LIM,
+	RC5T583_IRQ_DC2LIM,
+	RC5T583_IRQ_DC3LIM,
+
+	RC5T583_IRQ_CTC,
+	RC5T583_IRQ_YALE,
+	RC5T583_IRQ_DALE,
+	RC5T583_IRQ_WALE,
+
+	RC5T583_IRQ_AIN1L,
+	RC5T583_IRQ_AIN2L,
+	RC5T583_IRQ_AIN3L,
+	RC5T583_IRQ_VBATL,
+	RC5T583_IRQ_VIN3L,
+	RC5T583_IRQ_VIN8L,
+	RC5T583_IRQ_AIN1H,
+	RC5T583_IRQ_AIN2H,
+	RC5T583_IRQ_AIN3H,
+	RC5T583_IRQ_VBATH,
+	RC5T583_IRQ_VIN3H,
+	RC5T583_IRQ_VIN8H,
+	RC5T583_IRQ_ADCEND,
+
+	RC5T583_IRQ_GPIO0,
+	RC5T583_IRQ_GPIO1,
+	RC5T583_IRQ_GPIO2,
+	RC5T583_IRQ_GPIO3,
+	RC5T583_IRQ_GPIO4,
+	RC5T583_IRQ_GPIO5,
+	RC5T583_IRQ_GPIO6,
+	RC5T583_IRQ_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+	RC5T583_GPIO0,
+	RC5T583_GPIO1,
+	RC5T583_GPIO2,
+	RC5T583_GPIO3,
+	RC5T583_GPIO4,
+	RC5T583_GPIO5,
+	RC5T583_GPIO6,
+	RC5T583_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_GPIO,
+};
+
+enum {
+	RC5T583_DS_NONE,
+	RC5T583_DS_DC0,
+	RC5T583_DS_DC1,
+	RC5T583_DS_DC2,
+	RC5T583_DS_DC3,
+	RC5T583_DS_LDO0,
+	RC5T583_DS_LDO1,
+	RC5T583_DS_LDO2,
+	RC5T583_DS_LDO3,
+	RC5T583_DS_LDO4,
+	RC5T583_DS_LDO5,
+	RC5T583_DS_LDO6,
+	RC5T583_DS_LDO7,
+	RC5T583_DS_LDO8,
+	RC5T583_DS_LDO9,
+	RC5T583_DS_PSO0,
+	RC5T583_DS_PSO1,
+	RC5T583_DS_PSO2,
+	RC5T583_DS_PSO3,
+	RC5T583_DS_PSO4,
+	RC5T583_DS_PSO5,
+	RC5T583_DS_PSO6,
+	RC5T583_DS_PSO7,
+
+	/* Should be last entry */
+	RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+	RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+	struct device	*dev;
+	struct regmap	*regmap;
+	int		chip_irq;
+	int		irq_base;
+	struct mutex	irq_lock;
+	unsigned long	group_irq_en[MAX_MAIN_INTERRUPT];
+
+	/* For main interrupt bits in INTC */
+	uint8_t		intc_inten_reg;
+
+	/* For group interrupt bits and address */
+	uint8_t		irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+	/* For gpio edge */
+	uint8_t		gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+	int		irq_base;
+	bool		enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+	int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 8c54de67..8516fd1 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -28,6 +28,7 @@ enum stmpe_partnum {
 	STMPE1601,
 	STMPE2401,
 	STMPE2403,
+	STMPE_NBR_PARTS
 };
 
 /*
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
new file mode 100644
index 0000000..38e31c5
--- /dev/null
+++ b/include/linux/mfd/tps65090.h
@@ -0,0 +1,46 @@
+/*
+ * Core driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65090_H
+#define __LINUX_MFD_TPS65090_H
+
+struct tps65090_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps65090_platform_data {
+	int irq_base;
+	int num_subdevs;
+	struct tps65090_subdev_info *subdevs;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS65090 sub-device drivers
+ */
+extern int tps65090_write(struct device *dev, int reg, uint8_t val);
+extern int tps65090_read(struct device *dev, int reg, uint8_t *val);
+extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num);
+extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num);
+
+#endif /*__LINUX_MFD_TPS65090_H */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
new file mode 100644
index 0000000..e030ef9
--- /dev/null
+++ b/include/linux/mfd/tps65217.h
@@ -0,0 +1,283 @@
+/*
+ * linux/mfd/tps65217.h
+ *
+ * Functions to access TPS65217 power management chip.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65217_H
+#define __LINUX_MFD_TPS65217_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* I2C ID for TPS65217 part */
+#define TPS65217_I2C_ID			0x24
+
+/* All register addresses */
+#define TPS65217_REG_CHIPID		0X00
+#define TPS65217_REG_PPATH		0X01
+#define TPS65217_REG_INT		0X02
+#define TPS65217_REG_CHGCONFIG0		0X03
+#define TPS65217_REG_CHGCONFIG1		0X04
+#define TPS65217_REG_CHGCONFIG2		0X05
+#define TPS65217_REG_CHGCONFIG3		0X06
+#define TPS65217_REG_WLEDCTRL1		0X07
+#define TPS65217_REG_WLEDCTRL2		0X08
+#define TPS65217_REG_MUXCTRL		0X09
+#define TPS65217_REG_STATUS		0X0A
+#define TPS65217_REG_PASSWORD		0X0B
+#define TPS65217_REG_PGOOD		0X0C
+#define TPS65217_REG_DEFPG		0X0D
+#define TPS65217_REG_DEFDCDC1		0X0E
+#define TPS65217_REG_DEFDCDC2		0X0F
+#define TPS65217_REG_DEFDCDC3		0X10
+#define TPS65217_REG_DEFSLEW		0X11
+#define TPS65217_REG_DEFLDO1		0X12
+#define TPS65217_REG_DEFLDO2		0X13
+#define TPS65217_REG_DEFLS1		0X14
+#define TPS65217_REG_DEFLS2		0X15
+#define TPS65217_REG_ENABLE		0X16
+#define TPS65217_REG_DEFUVLO		0X18
+#define TPS65217_REG_SEQ1		0X19
+#define TPS65217_REG_SEQ2		0X1A
+#define TPS65217_REG_SEQ3		0X1B
+#define TPS65217_REG_SEQ4		0X1C
+#define TPS65217_REG_SEQ5		0X1D
+#define TPS65217_REG_SEQ6		0X1E
+
+/* Register field definitions */
+#define TPS65217_CHIPID_CHIP_MASK	0xF0
+#define TPS65217_CHIPID_REV_MASK	0x0F
+
+#define TPS65217_PPATH_ACSINK_ENABLE	BIT(7)
+#define TPS65217_PPATH_USBSINK_ENABLE	BIT(6)
+#define TPS65217_PPATH_AC_PW_ENABLE	BIT(5)
+#define TPS65217_PPATH_USB_PW_ENABLE	BIT(4)
+#define TPS65217_PPATH_AC_CURRENT_MASK	0x0C
+#define TPS65217_PPATH_USB_CURRENT_MASK	0x03
+
+#define TPS65217_INT_PBM		BIT(6)
+#define TPS65217_INT_ACM		BIT(5)
+#define TPS65217_INT_USBM		BIT(4)
+#define TPS65217_INT_PBI		BIT(2)
+#define TPS65217_INT_ACI		BIT(1)
+#define TPS65217_INT_USBI		BIT(0)
+
+#define TPS65217_CHGCONFIG0_TREG	BIT(7)
+#define TPS65217_CHGCONFIG0_DPPM	BIT(6)
+#define TPS65217_CHGCONFIG0_TSUSP	BIT(5)
+#define TPS65217_CHGCONFIG0_TERMI	BIT(4)
+#define TPS65217_CHGCONFIG0_ACTIVE	BIT(3)
+#define TPS65217_CHGCONFIG0_CHGTOUT	BIT(2)
+#define TPS65217_CHGCONFIG0_PCHGTOUT	BIT(1)
+#define TPS65217_CHGCONFIG0_BATTEMP	BIT(0)
+
+#define TPS65217_CHGCONFIG1_TMR_MASK	0xC0
+#define TPS65217_CHGCONFIG1_TMR_ENABLE	BIT(5)
+#define TPS65217_CHGCONFIG1_NTC_TYPE	BIT(4)
+#define TPS65217_CHGCONFIG1_RESET	BIT(3)
+#define TPS65217_CHGCONFIG1_TERM	BIT(2)
+#define TPS65217_CHGCONFIG1_SUSP	BIT(1)
+#define TPS65217_CHGCONFIG1_CHG_EN	BIT(0)
+
+#define TPS65217_CHGCONFIG2_DYNTMR	BIT(7)
+#define TPS65217_CHGCONFIG2_VPREGHG	BIT(6)
+#define TPS65217_CHGCONFIG2_VOREG_MASK	0x30
+
+#define TPS65217_CHGCONFIG3_ICHRG_MASK	0xC0
+#define TPS65217_CHGCONFIG3_DPPMTH_MASK	0x30
+#define TPS65217_CHGCONFIG2_PCHRGT	BIT(3)
+#define TPS65217_CHGCONFIG2_TERMIF	0x06
+#define TPS65217_CHGCONFIG2_TRANGE	BIT(0)
+
+#define TPS65217_WLEDCTRL1_ISINK_ENABLE	BIT(3)
+#define TPS65217_WLEDCTRL1_ISEL		BIT(2)
+#define TPS65217_WLEDCTRL1_FDIM_MASK	0x03
+
+#define TPS65217_WLEDCTRL2_DUTY_MASK	0x7F
+
+#define TPS65217_MUXCTRL_MUX_MASK	0x07
+
+#define TPS65217_STATUS_OFF		BIT(7)
+#define TPS65217_STATUS_ACPWR		BIT(3)
+#define TPS65217_STATUS_USBPWR		BIT(2)
+#define TPS65217_STATUS_PB		BIT(0)
+
+#define TPS65217_PASSWORD_REGS_UNLOCK	0x7D
+
+#define TPS65217_PGOOD_LDO3_PG		BIT(6)
+#define TPS65217_PGOOD_LDO4_PG		BIT(5)
+#define TPS65217_PGOOD_DC1_PG		BIT(4)
+#define TPS65217_PGOOD_DC2_PG		BIT(3)
+#define TPS65217_PGOOD_DC3_PG		BIT(2)
+#define TPS65217_PGOOD_LDO1_PG		BIT(1)
+#define TPS65217_PGOOD_LDO2_PG		BIT(0)
+
+#define TPS65217_DEFPG_LDO1PGM		BIT(3)
+#define TPS65217_DEFPG_LDO2PGM		BIT(2)
+#define TPS65217_DEFPG_PGDLY_MASK	0x03
+
+#define TPS65217_DEFDCDCX_XADJX		BIT(7)
+#define TPS65217_DEFDCDCX_DCDC_MASK	0x3F
+
+#define TPS65217_DEFSLEW_GO		BIT(7)
+#define TPS65217_DEFSLEW_GODSBL		BIT(6)
+#define TPS65217_DEFSLEW_PFM_EN1	BIT(5)
+#define TPS65217_DEFSLEW_PFM_EN2	BIT(4)
+#define TPS65217_DEFSLEW_PFM_EN3	BIT(3)
+#define TPS65217_DEFSLEW_SLEW_MASK	0x07
+
+#define TPS65217_DEFLDO1_LDO1_MASK	0x0F
+
+#define TPS65217_DEFLDO2_TRACK		BIT(6)
+#define TPS65217_DEFLDO2_LDO2_MASK	0x3F
+
+#define TPS65217_DEFLDO3_LDO3_EN	BIT(5)
+#define TPS65217_DEFLDO3_LDO3_MASK	0x1F
+
+#define TPS65217_DEFLDO4_LDO4_EN	BIT(5)
+#define TPS65217_DEFLDO4_LDO4_MASK	0x1F
+
+#define TPS65217_ENABLE_LS1_EN		BIT(6)
+#define TPS65217_ENABLE_LS2_EN		BIT(5)
+#define TPS65217_ENABLE_DC1_EN		BIT(4)
+#define TPS65217_ENABLE_DC2_EN		BIT(3)
+#define TPS65217_ENABLE_DC3_EN		BIT(2)
+#define TPS65217_ENABLE_LDO1_EN		BIT(1)
+#define TPS65217_ENABLE_LDO2_EN		BIT(0)
+
+#define TPS65217_DEFUVLO_UVLOHYS	BIT(2)
+#define TPS65217_DEFUVLO_UVLO_MASK	0x03
+
+#define TPS65217_SEQ1_DC1_SEQ_MASK	0xF0
+#define TPS65217_SEQ1_DC2_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ2_DC3_SEQ_MASK	0xF0
+#define TPS65217_SEQ2_LDO1_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ3_LDO2_SEQ_MASK	0xF0
+#define TPS65217_SEQ3_LDO3_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ4_LDO4_SEQ_MASK	0xF0
+
+#define TPS65217_SEQ5_DLY1_MASK		0xC0
+#define TPS65217_SEQ5_DLY2_MASK		0x30
+#define TPS65217_SEQ5_DLY3_MASK		0x0C
+#define TPS65217_SEQ5_DLY4_MASK		0x03
+
+#define TPS65217_SEQ6_DLY5_MASK		0xC0
+#define TPS65217_SEQ6_DLY6_MASK		0x30
+#define TPS65217_SEQ6_SEQUP		BIT(2)
+#define TPS65217_SEQ6_SEQDWN		BIT(1)
+#define TPS65217_SEQ6_INSTDWN		BIT(0)
+
+#define TPS65217_MAX_REGISTER		0x1E
+#define TPS65217_PROTECT_NONE		0
+#define TPS65217_PROTECT_L1		1
+#define TPS65217_PROTECT_L2		2
+
+
+enum tps65217_regulator_id {
+	/* DCDC's */
+	TPS65217_DCDC_1,
+	TPS65217_DCDC_2,
+	TPS65217_DCDC_3,
+	/* LDOs */
+	TPS65217_LDO_1,
+	TPS65217_LDO_2,
+	TPS65217_LDO_3,
+	TPS65217_LDO_4,
+};
+
+#define TPS65217_MAX_REG_ID		TPS65217_LDO_4
+
+/* Number of step-down converters available */
+#define TPS65217_NUM_DCDC		3
+/* Number of LDO voltage regulators available */
+#define TPS65217_NUM_LDO		4
+/* Number of total regulators available */
+#define TPS65217_NUM_REGULATOR		(TPS65217_NUM_DCDC + TPS65217_NUM_LDO)
+
+/**
+ * struct tps65217_board - packages regulator init data
+ * @tps65217_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator.
+ */
+struct tps65217_board {
+	struct regulator_init_data *tps65217_init_data;
+};
+
+/**
+ * struct tps_info - packages regulator constraints
+ * @name:		Voltage regulator name
+ * @min_uV:		minimum micro volts
+ * @max_uV:		minimum micro volts
+ * @vsel_to_uv:		Function pointer to get voltage from selector
+ * @uv_to_vsel:		Function pointer to get selector from voltage
+ * @table:		Table for non-uniform voltage step-size
+ * @table_len:		Length of the voltage table
+ * @enable_mask:	Regulator enable mask bits
+ * @set_vout_reg:	Regulator output voltage set register
+ * @set_vout_mask:	Regulator output voltage set mask
+ *
+ * This data is used to check the regualtor voltage limits while setting.
+ */
+struct tps_info {
+	const char *name;
+	int min_uV;
+	int max_uV;
+	int (*vsel_to_uv)(unsigned int vsel);
+	int (*uv_to_vsel)(int uV, unsigned int *vsel);
+	const int *table;
+	unsigned int table_len;
+	unsigned int enable_mask;
+	unsigned int set_vout_reg;
+	unsigned int set_vout_mask;
+};
+
+/**
+ * struct tps65217 - tps65217 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65217 chip
+ */
+
+struct tps65217 {
+	struct device *dev;
+	struct tps65217_board *pdata;
+	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
+	struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
+	struct tps_info *info[TPS65217_NUM_REGULATOR];
+	struct regmap *regmap;
+
+	/* Client devices */
+	struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
+};
+
+static inline struct tps65217 *dev_to_tps65217(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
+					unsigned int *val);
+int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
+			unsigned int val, unsigned int level);
+int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level);
+int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level);
+
+#endif /*  __LINUX_MFD_TPS65217_H */
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 76700b5..e348863 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -17,6 +17,8 @@
 #ifndef __LINUX_MFD_TPS65910_H
 #define __LINUX_MFD_TPS65910_H
 
+#include <linux/gpio.h>
+
 /* TPS chip id list */
 #define TPS65910			0
 #define TPS65911			1
@@ -796,6 +798,7 @@ struct tps65910_board {
 struct tps65910 {
 	struct device *dev;
 	struct i2c_client *i2c_client;
+	struct regmap *regmap;
 	struct mutex io_mutex;
 	unsigned int id;
 	int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index dc3e050..893267b 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -22,7 +22,6 @@ struct wm8994_ldo_pdata {
 	/** GPIOs to enable regulator, 0 or less if not available */
 	int enable;
 
-	const char *supply;
 	const struct regulator_init_data *init_data;
 };
 
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 76579f9..7bd73bb 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -26,7 +26,26 @@ enum ab8500_regulator_id {
 	AB8500_NUM_REGULATORS,
 };
 
-/* AB8500 register initialization */
+/* AB9450 regulators */
+enum ab9540_regulator_id {
+	AB9540_LDO_AUX1,
+	AB9540_LDO_AUX2,
+	AB9540_LDO_AUX3,
+	AB9540_LDO_AUX4,
+	AB9540_LDO_INTCORE,
+	AB9540_LDO_TVOUT,
+	AB9540_LDO_USB,
+	AB9540_LDO_AUDIO,
+	AB9540_LDO_ANAMIC1,
+	AB9540_LDO_ANAMIC2,
+	AB9540_LDO_DMIC,
+	AB9540_LDO_ANA,
+	AB9540_SYSCLKREQ_2,
+	AB9540_SYSCLKREQ_4,
+	AB9540_NUM_REGULATORS,
+};
+
+/* AB8500 and AB9540 register initialization */
 struct ab8500_regulator_reg_init {
 	int id;
 	u8 value;
@@ -71,4 +90,53 @@ enum ab8500_regulator_reg {
 	AB8500_NUM_REGULATOR_REGISTERS,
 };
 
+
+/* AB9540 registers */
+enum ab9540_regulator_reg {
+	AB9540_REGUREQUESTCTRL1,
+	AB9540_REGUREQUESTCTRL2,
+	AB9540_REGUREQUESTCTRL3,
+	AB9540_REGUREQUESTCTRL4,
+	AB9540_REGUSYSCLKREQ1HPVALID1,
+	AB9540_REGUSYSCLKREQ1HPVALID2,
+	AB9540_REGUHWHPREQ1VALID1,
+	AB9540_REGUHWHPREQ1VALID2,
+	AB9540_REGUHWHPREQ2VALID1,
+	AB9540_REGUHWHPREQ2VALID2,
+	AB9540_REGUSWHPREQVALID1,
+	AB9540_REGUSWHPREQVALID2,
+	AB9540_REGUSYSCLKREQVALID1,
+	AB9540_REGUSYSCLKREQVALID2,
+	AB9540_REGUVAUX4REQVALID,
+	AB9540_REGUMISC1,
+	AB9540_VAUDIOSUPPLY,
+	AB9540_REGUCTRL1VAMIC,
+	AB9540_VSMPS1REGU,
+	AB9540_VSMPS2REGU,
+	AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
+	AB9540_VPLLVANAREGU,
+	AB9540_EXTSUPPLYREGU,
+	AB9540_VAUX12REGU,
+	AB9540_VRF1VAUX3REGU,
+	AB9540_VSMPS1SEL1,
+	AB9540_VSMPS1SEL2,
+	AB9540_VSMPS1SEL3,
+	AB9540_VSMPS2SEL1,
+	AB9540_VSMPS2SEL2,
+	AB9540_VSMPS2SEL3,
+	AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
+	AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
+	AB9540_VAUX1SEL,
+	AB9540_VAUX2SEL,
+	AB9540_VRF1VAUX3SEL,
+	AB9540_REGUCTRL2SPARE,
+	AB9540_VAUX4REQCTRL,
+	AB9540_VAUX4REGU,
+	AB9540_VAUX4SEL,
+	AB9540_REGUCTRLDISCH,
+	AB9540_REGUCTRLDISCH2,
+	AB9540_REGUCTRLDISCH3,
+	AB9540_NUM_REGULATOR_REGISTERS,
+};
+
 #endif