sh: Bring kgdb back from the dead.

This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 files changed, 101 insertions, 369 deletions

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 87902e0..6be2385 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -77,16 +77,17 @@ config 4KSTACKS
 	  on the VM subsystem for higher order allocations. This option
 	  will also use IRQ stacks to compensate for the reduced stackspace.
 
-config KGDB
+config SH_KGDB
 	bool "Include KGDB kernel debugger"
 	select FRAME_POINTER
+	select DEBUG_INFO
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
 	  Unless you are intending to debug the kernel, say N here.
 
 menu "KGDB configuration options"
-	depends on KGDB
+	depends on SH_KGDB
 
 config MORE_COMPILE_OPTIONS
 	bool "Add any additional compile options"
@@ -109,16 +110,14 @@ config KGDB_THREAD
 
 config SH_KGDB_CONSOLE
 	bool "Console messages through GDB"
+	depends on !SERIAL_SH_SCI_CONSOLE
+	select SERIAL_CORE_CONSOLE
 	default n
 
 config KGDB_SYSRQ
 	bool "Allow SysRq 'G' to enter KGDB"
 	default y
 
-config KGDB_KERNEL_ASSERTS
-	bool "Include KGDB kernel assertions"
-	default n
-
 comment "Serial port setup"
 
 config KGDB_DEFPORT
@@ -131,7 +130,7 @@ config KGDB_DEFBAUD
 
 choice
 	prompt "Parity"
-	depends on KGDB
+	depends on SH_KGDB
 	default KGDB_DEFPARITY_N
 
 config KGDB_DEFPARITY_N
@@ -147,7 +146,7 @@ endchoice
 
 choice
 	prompt "Data bits"
-	depends on KGDB
+	depends on SH_KGDB
 	default KGDB_DEFBITS_8
 
 config KGDB_DEFBITS_8
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bd9b172..0fadde2 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -47,7 +47,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
 
 cflags-$(CONFIG_SH_DSP)			+= -Wa,-dsp
-cflags-$(CONFIG_SH_KGDB)		+= -g
 
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
 	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index e3feae6..770defe 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -14,153 +14,6 @@
 #include <asm/se7751.h>
 #include <asm/io.h>
 
-void init_7751se_IRQ(void);
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap = 
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
- 
-/*
- * Initialize the board
- */
-static void __init sh7751se_setup(char **cmdline_p)
-{
-	/* Call init_smsc() replacement to set up SuperIO. */
-	/* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
-	kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging.      *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and  *
- * arch/i386/lib/kgdb_serial.c).                                     *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8  /* Base I/O address */
-#define COM1_IRQ  4      /* IRQ not used yet */
-#define COM2_PORT 0x2f8  /* Base I/O address */
-#define COM2_IRQ  3      /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
-	int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
-	{ COM1_PORT },
-	{ COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg)	inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v)	outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR    (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
-	int lsr;
-	int c = -1;
-
-	while (c == -1) {
-		lsr = UART_IN(UART_LSR);
-		if (lsr & UART_LSR_DR) 
-			c = UART_IN(UART_RX);
-		if ((lsr & UART_LSR_RXCERR))
-			c = -1;
-	}
-	return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
-	while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
-		;
-	UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
-	int port;
-	int lcr = 0;
-	int bdiv = 0;
-
-	if (kgdb_portnum >= UART_NPORTS) {
-		KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
-		return -1;
-	}
-
-	kgdb_uart_port = &uart_ports[kgdb_portnum];
-
-	/* Init sequence from gdb_hook_interrupt */
-	UART_IN(UART_RX);
-	UART_OUT(UART_IER, 0);
-
-	UART_IN(UART_RX);	/* Serial driver comments say */
-	UART_IN(UART_IIR);	/* this clears interrupt regs */
-	UART_IN(UART_MSR);
-
-	/* Figure basic LCR values */
-	switch (kgdb_bits) {
-	case '7':
-		lcr |= UART_LCR_WLEN7;
-		break;
-	default: case '8': 
-		lcr |= UART_LCR_WLEN8;
-		break;
-	}
-	switch (kgdb_parity) {
-	case 'O':
-		lcr |= UART_LCR_PARITY;
-		break;
-	case 'E':
-		lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
-		break;
-	default: break;
-	}
-
-	/* Figure the baud rate divisor */
-	bdiv = (SB_BASE/kgdb_baud);
-	
-	/* Set the baud rate and LCR values */
-	UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
-	UART_OUT(UART_DLL, (bdiv & 0xff));
-	UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
-	UART_OUT(UART_LCR, lcr);
-
-	/* Set the MCR */
-	UART_OUT(UART_MCR, SB_MCR);
-
-	/* Turn off FIFOs for now */
-	UART_OUT(UART_FCR, 0);
-
-	/* Setup complete: initialize function pointers */
-	kgdb_getchar = kgdb_uart_getchar;
-	kgdb_putchar = kgdb_uart_putchar;
-
-	return 0;
-}
-#endif /* CONFIG_SH_KGDB */
-
 static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 
 static struct resource heartbeat_resources[] = {
@@ -197,7 +50,6 @@ __initcall(se7751_devices_setup);
  */
 struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
-	.mv_setup		= sh7751se_setup,
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= sh7751se_inb,
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d8927d8..737eadc 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -6,11 +6,11 @@
  * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
  * Amit S. Kale <akale@veritas.com>,  William Gatliff <bgat@open-widgets.com>,
  * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- * 
+ *
  * This version by Henry Bell <henry.bell@st.com>
  * Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- * 
- * Contains low-level support for remote debug using GDB. 
+ *
+ * Contains low-level support for remote debug using GDB.
  *
  * To enable debugger support, two things need to happen. A call to
  * set_debug_traps() is necessary in order to allow any breakpoints
@@ -48,7 +48,7 @@
  *    k             kill (Detach GDB)
  *
  *    d             Toggle debug flag
- *    D             Detach GDB 
+ *    D             Detach GDB
  *
  *    Hct           Set thread t for operations,           OK or ENN
  *                  c = 'c' (step, cont), c = 'g' (other
@@ -58,7 +58,7 @@
  *    qfThreadInfo  Get list of current threads (first)    m<id>
  *    qsThreadInfo   "    "  "     "      "   (subsequent)
  *    qOffsets      Get section offsets                  Text=x;Data=y;Bss=z
- * 
+ *
  *    TXX           Find if thread XX is alive             OK or ENN
  *    ?             What was the last sigval ?             SNN   (signal NN)
  *    O             Output to GDB console
@@ -74,7 +74,7 @@
  *       '$' or '#'.  If <data> starts with two characters followed by
  *       ':', then the existing stubs interpret this as a sequence number.
  *
- *       CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
+ *       CSUM1 and CSUM2 are ascii hex representation of an 8-bit
  *       checksum of <data>, the most significant nibble is sent first.
  *       the hex digits 0-9,a-f are used.
  *
@@ -86,8 +86,8 @@
  * Responses can be run-length encoded to save space.  A '*' means that
  * the next character is an ASCII encoding giving a repeat count which
  * stands for that many repititions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3 
- * (which is where RLE starts to win).  Don't use an n > 126. 
+ * The encoding is n+29, yielding a printable character where n >=3
+ * (which is where RLE starts to win).  Don't use an n > 126.
  *
  * So "0* " means the same as "0000".
  */
@@ -100,12 +100,10 @@
 #include <linux/delay.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
 #include <linux/console.h>
-#endif
-
+#include <linux/sysrq.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 #include <asm/current.h>
 #include <asm/signal.h>
 #include <asm/pgtable.h>
@@ -153,7 +151,6 @@ char kgdb_in_gdb_mode;
 char in_nmi;			/* Set during NMI to prevent reentry */
 int kgdb_nofault;		/* Boolean to ignore bus errs (i.e. in GDB) */
 int kgdb_enabled = 1;		/* Default to enabled, cmdline can disable */
-int kgdb_halt;
 
 /* Exposed for user access */
 struct task_struct *kgdb_current;
@@ -328,7 +325,7 @@ static int hex_to_int(char **ptr, int *int_value)
 }
 
 /*  Copy the binary array pointed to by buf into mem.  Fix $, #,
-    and 0x7d escaped with 0x7d.  Return a pointer to the character 
+    and 0x7d escaped with 0x7d.  Return a pointer to the character
     after the last byte written. */
 static char *ebin_to_mem(const char *buf, char *mem, int count)
 {
@@ -452,7 +449,7 @@ static void get_packet(char *buffer, int buflen)
 				/* Ack successful transfer */
 				put_debug_char('+');
 
-				/* If a sequence char is present, reply 
+				/* If a sequence char is present, reply
 				   the sequence ID */
 				if (buffer[2] == ':') {
 					put_debug_char(buffer[0]);
@@ -759,7 +756,7 @@ static short *get_step_address(void)
 	return (short *) addr;
 }
 
-/* Set up a single-step.  Replace the instruction immediately after the 
+/* Set up a single-step.  Replace the instruction immediately after the
    current instruction (i.e. next in the expected flow of control) with a
    trap instruction, so that returning will cause only a single instruction
    to be executed. Note that this model is slightly broken for instructions
@@ -1002,10 +999,8 @@ void set_thread_msg(void)
 	char *ptr;
 
 	switch (in_buffer[1]) {
-
-       	/* To select which thread for gG etc messages, i.e. supported */
+	/* To select which thread for gG etc messages, i.e. supported */
 	case 'g':
-
 		ptr = &in_buffer[2];
 		hex_to_int(&ptr, &threadid);
 		thread = get_thread(threadid);
@@ -1173,6 +1168,7 @@ static void query_msg(void)
 }
 #endif /* CONFIG_KGDB_THREAD */
 
+#ifdef CONFIG_SH_KGDB_CONSOLE
 /*
  * Bring up the ports..
  */
@@ -1185,6 +1181,9 @@ static int kgdb_serial_setup(void)
 
 	return 0;
 }
+#else
+#define kgdb_serial_setup()	0
+#endif
 
 /* The command loop, read and act on requests */
 static void kgdb_command_loop(const int excep_code, const int trapa_value)
@@ -1193,7 +1192,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
 
 	if (excep_code == NMI_VEC) {
 #ifndef CONFIG_KGDB_NMI
-		KGDB_PRINTK("Ignoring unexpected NMI?\n");
+		printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n");
 		return;
 #else /* CONFIG_KGDB_NMI */
 		if (!kgdb_enabled) {
@@ -1216,10 +1215,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
 	/* Enter GDB mode (e.g. after detach) */
 	if (!kgdb_in_gdb_mode) {
 		/* Do serial setup, notify user, issue preemptive ack */
-		kgdb_serial_setup();
-		KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n",
-			    (kgdb_porttype ? kgdb_porttype->name : ""),
-			    kgdb_portnum, kgdb_baud);
+		printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
 		kgdb_in_gdb_mode = 1;
 		put_debug_char('+');
 	}
@@ -1233,21 +1229,18 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
 	   will later be replaced by its original one.  Do NOT do this for
 	   trap 0xff, since that indicates a compiled-in breakpoint which
 	   will not be replaced (and we would retake the trap forever) */
-	if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) {
+	if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
 		trap_registers.pc -= 2;
-	}
 
 	/* Undo any stepping we may have done */
 	undo_single_step();
 
 	while (1) {
-
 		out_buffer[0] = 0;
 		get_packet(in_buffer, BUFMAX);
 
 		/* Examine first char of buffer to see what we need to do */
 		switch (in_buffer[0]) {
-
 		case '?':	/* Send which signal we've received */
 			send_signal_msg(sigval);
 			break;
@@ -1323,11 +1316,8 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
 }
 
 /* There has been an exception, most likely a breakpoint. */
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
-				      unsigned long r6, unsigned long r7,
-				      struct pt_regs __regs)
+static void handle_exception(struct pt_regs *regs)
 {
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int excep_code, vbr_val;
 	int count;
 	int trapa_value = ctrl_inl(TRA);
@@ -1355,7 +1345,7 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
 	kgdb_trapa_val = trapa_value;
 
 	/* Act on the exception */
-	kgdb_command_loop(excep_code >> 5, trapa_value);
+	kgdb_command_loop(excep_code, trapa_value);
 
 	kgdb_current = NULL;
 
@@ -1373,14 +1363,12 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
 	asm("ldc %0, vbr": :"r"(vbr_val));
 }
 
-/* Trigger a breakpoint by function */
-void breakpoint(void)
+asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
+				      unsigned long r6, unsigned long r7,
+				      struct pt_regs __regs)
 {
-	if (!kgdb_enabled) {
-		kgdb_enabled = 1;
-		kgdb_init();
-	}
-	BREAKPOINT();
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	handle_exception(regs);
 }
 
 /* Initialise the KGDB data structures and serial configuration */
@@ -1395,24 +1383,16 @@ int kgdb_init(void)
 	kgdb_in_gdb_mode = 0;
 
 	if (kgdb_serial_setup() != 0) {
-		KGDB_PRINTK("serial setup error\n");
+		printk(KERN_NOTICE "KGDB: serial setup error\n");
 		return -1;
 	}
 
 	/* Init ptr to exception handler */
-	kgdb_debug_hook = kgdb_handle_exception;
+	kgdb_debug_hook = handle_exception;
 	kgdb_bus_err_hook = kgdb_handle_bus_error;
 
 	/* Enter kgdb now if requested, or just report init done */
-	if (kgdb_halt) {
-		kgdb_in_gdb_mode = 1;
-		put_debug_char('+');
-		breakpoint();
-	}
-	else
-	{
-		KGDB_PRINTK("stub is initialized.\n");
-	}
+	printk(KERN_NOTICE "KGDB: stub is initialized.\n");
 
 	return 0;
 }
@@ -1437,7 +1417,7 @@ static void kgdb_msg_write(const char *s, unsigned count)
 
 		/* Calculate how many this time */
 		wcount = (count > MAXOUT) ? MAXOUT : count;
-		
+
 		/* Pack in hex chars */
 		for (i = 0; i < wcount; i++)
 			bufptr = pack_hex_byte(bufptr, s[i]);
@@ -1467,3 +1447,25 @@ void kgdb_console_write(struct console *co, const char *s, unsigned count)
 	kgdb_msg_write(s, count);
 }
 #endif
+
+#ifdef CONFIG_KGDB_SYSRQ
+static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+{
+	printk("Entering GDB stub\n");
+	breakpoint();
+}
+
+static struct sysrq_key_op sysrq_gdb_op = {
+        .handler        = sysrq_handle_gdb,
+        .help_msg       = "Gdb",
+        .action_msg     = "GDB",
+};
+
+static int gdb_register_sysrq(void)
+{
+	printk("Registering GDB sysrq handler\n");
+	register_sysrq_key('g', &sysrq_gdb_op);
+	return 0;
+}
+module_init(gdb_register_sysrq);
+#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 98802ab..f964904 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,11 +25,8 @@
 #include <asm/setup.h>
 #include <asm/clock.h>
 
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_parse_options(char *options);
-#endif
 extern void * __rd_start, * __rd_end;
+
 /*
  * Machine setup..
  */
@@ -499,92 +496,3 @@ struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 #endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_SH_KGDB
-/*
- * Parse command-line kgdb options.  By default KGDB is enabled,
- * entered on error (or other action) using default serial info.
- * The command-line option can include a serial port specification
- * and an action to override default or configured behavior.
- */
-struct kgdb_sermap kgdb_sci_sermap =
-{ "ttySC", 5, kgdb_sci_setup, NULL };
-
-struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
-struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;
-
-void kgdb_register_sermap(struct kgdb_sermap *map)
-{
-	struct kgdb_sermap *last;
-
-	for (last = kgdb_serlist; last->next; last = last->next)
-		;
-	last->next = map;
-	if (!map->namelen) {
-		map->namelen = strlen(map->name);
-	}
-}
-
-static int __init kgdb_parse_options(char *options)
-{
-	char c;
-	int baud;
-
-	/* Check for port spec (or use default) */
-
-	/* Determine port type and instance */
-	if (!memcmp(options, "tty", 3)) {
-		struct kgdb_sermap *map = kgdb_serlist;
-
-		while (map && memcmp(options, map->name, map->namelen))
-			map = map->next;
-
-		if (!map) {
-			KGDB_PRINTK("unknown port spec in %s\n", options);
-			return -1;
-		}
-
-		kgdb_porttype = map;
-		kgdb_serial_setup = map->setup_fn;
-		kgdb_portnum = options[map->namelen] - '0';
-		options += map->namelen + 1;
-
-		options = (*options == ',') ? options+1 : options;
-
-		/* Read optional parameters (baud/parity/bits) */
-		baud = simple_strtoul(options, &options, 10);
-		if (baud != 0) {
-			kgdb_baud = baud;
-
-			c = toupper(*options);
-			if (c == 'E' || c == 'O' || c == 'N') {
-				kgdb_parity = c;
-				options++;
-			}
-
-			c = *options;
-			if (c == '7' || c == '8') {
-				kgdb_bits = c;
-				options++;
-			}
-			options = (*options == ',') ? options+1 : options;
-		}
-	}
-
-	/* Check for action specification */
-	if (!memcmp(options, "halt", 4)) {
-		kgdb_halt = 1;
-		options += 4;
-	} else if (!memcmp(options, "disabled", 8)) {
-		kgdb_enabled = 0;
-		options += 8;
-	}
-
-	if (*options) {
-                KGDB_PRINTK("ignored unknown options: %s\n", options);
-		return 0;
-	}
-	return 1;
-}
-__setup("kgdb=", kgdb_parse_options);
-#endif /* CONFIG_SH_KGDB */
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 46c40bb..4b17f84 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -46,6 +46,7 @@
 #endif
 
 #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <linux/ctype.h>
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #include <asm/kgdb.h>
@@ -163,7 +164,7 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
 	usegdb |= sh_bios_in_gdb_mode();
 #endif
 #ifdef CONFIG_SH_KGDB
-	usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+	usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
 #endif
 
 	if (usegdb) {
@@ -204,7 +205,7 @@ static int kgdb_sci_getchar(void)
         int c;
 
         /* Keep trying to read a character, this could be neater */
-        while ((c = get_char(kgdb_sci_port)) < 0)
+        while ((c = get_char(&kgdb_sci_port->port)) < 0)
 		cpu_relax();
 
         return c;
@@ -212,7 +213,7 @@ static int kgdb_sci_getchar(void)
 
 static inline void kgdb_sci_putchar(int c)
 {
-        put_char(kgdb_sci_port, c);
+        put_char(&kgdb_sci_port->port, c);
 }
 #endif /* CONFIG_SH_KGDB */
 
@@ -738,7 +739,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 #ifdef CONFIG_SH_KGDB
 	/* Break into the debugger if a break is detected */
-	BREAKPOINT();
+	breakpoint();
 #endif
 
 	sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
@@ -971,7 +972,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct sci_port *s = &sci_ports[port->line];
 	unsigned int status, baud, smr_val;
-	unsigned long flags;
 	int t;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
@@ -989,12 +989,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 #else
 			t = SCBRR_VALUE(baud);
 #endif
-		}
 			break;
+		}
 	}
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	do {
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TEND(port)));
@@ -1038,8 +1036,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if ((termios->c_cflag & CREAD) != 0)
               sci_start_rx(port,0);
-
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static const char *sci_type(struct uart_port *port)
@@ -1220,8 +1216,6 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (!port->membase || !port->mapbase)
 		return -ENODEV;
 
-	spin_lock_init(&port->lock);
-
 	port->type = serial_console_port->type;
 
 	if (port->flags & UPF_IOREMAP)
@@ -1247,7 +1241,7 @@ static struct console serial_console = {
 	.device		= uart_console_device,
 	.write		= serial_console_write,
 	.setup		= serial_console_setup,
-	.flags		= CON_PRINTBUFFER, 
+	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &sci_uart_driver,
 };
@@ -1292,11 +1286,23 @@ int __init kgdb_console_setup(struct console *co, char *options)
 	int parity = 'n';
 	int flow = 'n';
 
-	spin_lock_init(&port->lock);
-
 	if (co->index != kgdb_portnum)
 		co->index = kgdb_portnum;
 
+	kgdb_sci_port = &sci_ports[co->index];
+	port = &kgdb_sci_port->port;
+
+	/*
+	 * Also need to check port->type, we don't actually have any
+	 * UPIO_PORT ports, but uart_report_port() handily misreports
+	 * it anyways if we don't have a port available by the time this is
+	 * called.
+	 */
+	if (!port->type)
+		return -ENODEV;
+	if (!port->membase || !port->mapbase)
+		return -ENODEV;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else
@@ -1311,11 +1317,12 @@ int __init kgdb_console_setup(struct console *co, char *options)
 
 #ifdef CONFIG_SH_KGDB_CONSOLE
 static struct console kgdb_console = {
-        .name		= "ttySC",
-        .write		= kgdb_console_write,
-        .setup		= kgdb_console_setup,
-        .flags		= CON_PRINTBUFFER | CON_ENABLED,
-        .index		= -1,
+	.name		= "ttySC",
+	.device		= uart_console_device,
+	.write		= kgdb_console_write,
+	.setup		= kgdb_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
 	.data		= &sci_uart_driver,
 };
 
@@ -1386,6 +1393,12 @@ static int __devinit sci_probe(struct platform_device *dev)
 		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
+#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
+	kgdb_sci_port	= &sci_ports[kgdb_portnum];
+	kgdb_getchar	= kgdb_sci_getchar;
+	kgdb_putchar	= kgdb_sci_putchar;
+#endif
+
 #ifdef CONFIG_CPU_FREQ
 	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
 	dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 0095c66..74bd095 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -17,6 +17,7 @@
 #define __KGDB_H
 
 #include <asm/ptrace.h>
+#include <asm/cacheflush.h>
 
 struct console;
 
@@ -45,35 +46,21 @@ extern int kgdb_portnum;
 extern int kgdb_baud;
 extern char kgdb_parity;
 extern char kgdb_bits;
-extern int kgdb_console_setup(struct console *, char *);
 
 /* Init and interface stuff */
 extern int kgdb_init(void);
-extern int (*kgdb_serial_setup)(void);
 extern int (*kgdb_getchar)(void);
 extern void (*kgdb_putchar)(int);
 
-struct kgdb_sermap {
-	char *name;
-	int namelen;
-	int (*setup_fn)(struct console *, char *);
-	struct kgdb_sermap *next;
-};
-extern void kgdb_register_sermap(struct kgdb_sermap *map);
-extern struct kgdb_sermap *kgdb_porttype;
-
 /* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); 
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
 typedef void (kgdb_bus_error_hook_t)(void);
 extern kgdb_debug_hook_t  *kgdb_debug_hook;
 extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
 
-extern void breakpoint(void);
-
 /* Console */
-struct console;
 void kgdb_console_write(struct console *co, const char *s, unsigned count);
-void kgdb_console_init(void);
+extern int kgdb_console_setup(struct console *, char *);
 
 /* Prototypes for jmp fns */
 #define _JBLEN 9
@@ -81,11 +68,8 @@ typedef        int jmp_buf[_JBLEN];
 extern void    longjmp(jmp_buf __jmpb, int __retval);
 extern int     setjmp(jmp_buf __jmpb);
 
-/* Variadic macro to print our own message to the console */
-#define KGDB_PRINTK(...) printk("KGDB: " __VA_ARGS__)
-
 /* Forced breakpoint */
-#define BREAKPOINT()					\
+#define breakpoint()					\
 do {							\
 	if (kgdb_enabled)				\
 		__asm__ __volatile__("trapa   #0x3c");	\
@@ -95,7 +79,6 @@ do {							\
 #if defined(CONFIG_CPU_SH4)
 #define kgdb_flush_icache_range(start, end) \
 {									\
-	extern void __flush_purge_region(void *, int);			\
 	__flush_purge_region((void*)(start), (int)(end) - (int)(start));\
 	flush_icache_range((start), (end));				\
 }
@@ -103,31 +86,6 @@ do {							\
 #define kgdb_flush_icache_range(start, end)	do { } while (0)
 #endif
 
-/* Kernel assert macros */
-#ifdef CONFIG_KGDB_KERNEL_ASSERTS
-
-/* Predefined conditions */
-#define KA_VALID_ERRNO(errno) ((errno) > 0 && (errno) <= EMEDIUMTYPE)
-#define KA_VALID_PTR_ERR(ptr) KA_VALID_ERRNO(-PTR_ERR(ptr))
-#define KA_VALID_KPTR(ptr)  (!(ptr) || \
-              ((void *)(ptr) >= (void *)PAGE_OFFSET &&  \
-               (void *)(ptr) < ERR_PTR(-EMEDIUMTYPE)))
-#define KA_VALID_PTRORERR(errptr) \
-               (KA_VALID_KPTR(errptr) || KA_VALID_PTR_ERR(errptr))
-#define KA_HELD_GKL()  (current->lock_depth >= 0)
-
-/* The actual assert */
-#define KGDB_ASSERT(condition, message) do {                   \
-       if (!(condition) && (kgdb_enabled)) {                   \
-               KGDB_PRINTK("Assertion failed at %s:%d: %s\n",  \
-                                  __FILE__, __LINE__, message);\
-               BREAKPOINT();                                   \
-       }                                                       \
-} while (0)
-#else
-#define KGDB_ASSERT(condition, message)
-#endif
-
 /* Taken from sh-stub.c of GDB 4.18 */
 static const char hexchars[] = "0123456789abcdef";
 
@@ -142,5 +100,4 @@ static inline char lowhex(const int x)
 {
 	return hexchars[x & 0xf];
 }
-
 #endif
diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h
index 88cd379..02ca934 100644
--- a/include/asm-sh/se7751.h
+++ b/include/asm-sh/se7751.h
@@ -65,6 +65,8 @@
 
 #define IRQ_79C973	13
 
+void init_7751se_IRQ(void);
+
 #define __IO_PREFIX	sh7751se
 #include <asm/io_generic.h>