Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

12 files changed, 129 insertions, 86 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 333c212..6dcd55a 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -41,6 +41,9 @@ static struct usb_device_id ath3k_table[] = {
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
+
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE02C) },
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4cefa91..b7f2f37 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -105,6 +105,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -829,7 +832,7 @@ static void btusb_work(struct work_struct *work)
 
 	if (hdev->conn_hash.sco_num > 0) {
 		if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
-			err = usb_autopm_get_interface(data->isoc);
+			err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
 			if (err < 0) {
 				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 				usb_kill_anchored_urbs(&data->isoc_anchor);
@@ -858,7 +861,7 @@ static void btusb_work(struct work_struct *work)
 
 		__set_isoc_interface(hdev, 0);
 		if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
-			usb_autopm_put_interface(data->isoc);
+			usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 78c26fd..62ce2f4 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
 	return 0;
 }
 
+/*
+ * Wait for synth to settle
+ */
+static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
+			struct ieee80211_channel *channel)
+{
+	/*
+	 * On 5211+ read activation -> rx delay
+	 * and use it (100ns steps).
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		u32 delay;
+		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+			AR5K_PHY_RX_DELAY_M;
+		delay = (channel->hw_value & CHANNEL_CCK) ?
+			((delay << 2) / 22) : (delay / 10);
+		if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
+			delay = delay << 1;
+		if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
+			delay = delay << 2;
+		/* XXX: /2 on turbo ? Let's be safe
+		 * for now */
+		udelay(100 + delay);
+	} else {
+		mdelay(1);
+	}
+}
+
 
 /**********************\
 * RF Gain optimization *
@@ -1253,6 +1281,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
 	case AR5K_RF5111:
 		ret = ath5k_hw_rf5111_channel(ah, channel);
 		break;
+	case AR5K_RF2317:
 	case AR5K_RF2425:
 		ret = ath5k_hw_rf2425_channel(ah, channel);
 		break;
@@ -3237,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		/* Failed */
 		if (i >= 100)
 			return -EIO;
+
+		/* Set channel and wait for synth */
+		ret = ath5k_hw_channel(ah, channel);
+		if (ret)
+			return ret;
+
+		ath5k_hw_wait_for_synth(ah, channel);
 	}
 
 	/*
@@ -3251,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 	if (ret)
 		return ret;
 
+	/* Write OFDM timings on 5212*/
+	if (ah->ah_version == AR5K_AR5212 &&
+		channel->hw_value & CHANNEL_OFDM) {
+
+		ret = ath5k_hw_write_ofdm_timings(ah, channel);
+		if (ret)
+			return ret;
+
+		/* Spur info is available only from EEPROM versions
+		 * greater than 5.3, but the EEPROM routines will use
+		 * static values for older versions */
+		if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
+			ath5k_hw_set_spur_mitigation_filter(ah,
+							    channel);
+	}
+
+	/* If we used fast channel switching
+	 * we are done, release RF bus and
+	 * fire up NF calibration.
+	 *
+	 * Note: Only NF calibration due to
+	 * channel change, not AGC calibration
+	 * since AGC is still running !
+	 */
+	if (fast) {
+		/*
+		 * Release RF Bus grant
+		 */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+				    AR5K_PHY_RFBUS_REQ_REQUEST);
+
+		/*
+		 * Start NF calibration
+		 */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_NF);
+
+		return ret;
+	}
+
 	/*
 	 * For 5210 we do all initialization using
 	 * initvals, so we don't have to modify
 	 * any settings (5210 also only supports
 	 * a/aturbo modes)
 	 */
-	if ((ah->ah_version != AR5K_AR5210) && !fast) {
+	if (ah->ah_version != AR5K_AR5210) {
 
 		/*
 		 * Write initial RF gain settings
@@ -3276,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		if (ret)
 			return ret;
 
-		/* Write OFDM timings on 5212*/
-		if (ah->ah_version == AR5K_AR5212 &&
-			channel->hw_value & CHANNEL_OFDM) {
-
-			ret = ath5k_hw_write_ofdm_timings(ah, channel);
-			if (ret)
-				return ret;
-
-			/* Spur info is available only from EEPROM versions
-			 * greater than 5.3, but the EEPROM routines will use
-			 * static values for older versions */
-			if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
-				ath5k_hw_set_spur_mitigation_filter(ah,
-								    channel);
-		}
-
 		/*Enable/disable 802.11b mode on 5111
 		(enable 2111 frequency converter + CCK)*/
 		if (ah->ah_radio == AR5K_RF5111) {
@@ -3322,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 	 */
 	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
 
+	ath5k_hw_wait_for_synth(ah, channel);
+
 	/*
-	 * On 5211+ read activation -> rx delay
-	 * and use it.
+	 * Perform ADC test to see if baseband is ready
+	 * Set tx hold and check adc test register
 	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		u32 delay;
-		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
-			AR5K_PHY_RX_DELAY_M;
-		delay = (channel->hw_value & CHANNEL_CCK) ?
-			((delay << 2) / 22) : (delay / 10);
-		if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
-			delay = delay << 1;
-		if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
-			delay = delay << 2;
-		/* XXX: /2 on turbo ? Let's be safe
-		 * for now */
-		udelay(100 + delay);
-	} else {
-		mdelay(1);
-	}
-
-	if (fast)
-		/*
-		 * Release RF Bus grant
-		 */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
-				    AR5K_PHY_RFBUS_REQ_REQUEST);
-	else {
-		/*
-		 * Perform ADC test to see if baseband is ready
-		 * Set tx hold and check adc test register
-		 */
-		phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
-		ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
-		for (i = 0; i <= 20; i++) {
-			if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
-				break;
-			udelay(200);
-		}
-		ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+	phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
 	}
+	ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
 
 	/*
 	 * Start automatic gain control calibration
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 23838e3..1a7fa6e 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,7 +21,6 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 #include <linux/completion.h>
-#include <linux/pm_qos_params.h>
 
 #include "debug.h"
 #include "common.h"
@@ -57,8 +56,6 @@ struct ath_node;
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define ATH9K_PM_QOS_DEFAULT_VALUE	55
-
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
@@ -633,8 +630,6 @@ struct ath_softc {
 	struct ath_descdma txsdma;
 
 	struct ath_ant_comb ant_comb;
-
-	struct pm_qos_request_list pm_qos_req;
 };
 
 struct ath_wiphy {
@@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 extern struct ieee80211_ops ath9k_ops;
 extern int ath9k_modparam_nohwcrypt;
 extern int led_blink;
-extern int ath9k_pm_qos_value;
 extern bool is_ath9k_unloaded;
 
 irqreturn_t ath_isr(int irq, void *dev);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 087a6a9..a033d01 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -41,10 +41,6 @@ static int ath9k_btcoex_enable;
 module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
 MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
 
-int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE;
-module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH);
-MODULE_PARM_DESC(pmqos, "User specified PM-QOS value");
-
 bool is_ath9k_unloaded;
 /* We use the hw_value as an index into our private channel structure */
 
@@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 	ath_init_leds(sc);
 	ath_start_rfkill_poll(sc);
 
-	pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
-
 	return 0;
 
 error_world:
@@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc)
 	}
 
 	ieee80211_unregister_hw(hw);
-	pm_qos_remove_request(&sc->pm_qos_req);
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
 	ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index da5c645..a09d15f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1173,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
 			ath9k_btcoex_timer_resume(sc);
 	}
 
-	/* User has the option to provide pm-qos value as a module
-	 * parameter rather than using the default value of
-	 * 'ATH9K_PM_QOS_DEFAULT_VALUE'.
-	 */
-	pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
-
 	if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
 		common->bus_ops->extn_synch_en(common);
 
@@ -1345,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	sc->sc_flags |= SC_OP_INVALID;
 
-	pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
-
 	mutex_unlock(&sc->mutex);
 
 	ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 1eacba4..0494d7b 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 	while (i != idx) {
 		u16 len;
 		struct sk_buff *skb;
+		dma_addr_t dma_addr;
 		desc = &ring[i];
 		len = le16_to_cpu(desc->len);
 		skb = rx_buf[i];
@@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 
 			len = priv->common.rx_mtu;
 		}
+		dma_addr = le32_to_cpu(desc->host_addr);
+		pci_dma_sync_single_for_cpu(priv->pdev, dma_addr,
+			priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
 		skb_put(skb, len);
 
 		if (p54_rx(dev, skb)) {
-			pci_unmap_single(priv->pdev,
-					 le32_to_cpu(desc->host_addr),
-					 priv->common.rx_mtu + 32,
-					 PCI_DMA_FROMDEVICE);
+			pci_unmap_single(priv->pdev, dma_addr,
+				priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
 			rx_buf[i] = NULL;
-			desc->host_addr = 0;
+			desc->host_addr = cpu_to_le32(0);
 		} else {
 			skb_trim(skb, 0);
+			pci_dma_sync_single_for_device(priv->pdev, dma_addr,
+				priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
 			desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
 		}
 
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aa97971..3b3f1e4 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -652,6 +652,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 
+		/*
+		 * The hardware has already checked the Michael Mic and has
+		 * stripped it from the frame. Signal this to mac80211.
+		 */
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
 		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 			rxdesc->flags |= RX_FLAG_DECRYPTED;
 		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
@@ -1065,6 +1071,8 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 	{ PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) },
 #endif
 #ifdef CONFIG_RT2800PCI_RT35XX
+	{ PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index b97a4a5..197a36c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -486,6 +486,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 
+		/*
+		 * The hardware has already checked the Michael Mic and has
+		 * stripped it from the frame. Signal this to mac80211.
+		 */
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
 		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 			rxdesc->flags |= RX_FLAG_DECRYPTED;
 		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 2575c2d..d7b9af4 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -727,7 +727,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
 			break;
 		}
 
+		tty_unlock();
 		schedule();
+		tty_lock();
 	}
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&dev->wait, &wait);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 45fbb9e..c9ceb4d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1033,6 +1033,12 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
 	if (is_multicast_ether_addr(hdr->addr1))
 		return;
 
+	/*
+	 * In case we receive frames after disassociation.
+	 */
+	if (!sdata->u.mgd.associated)
+		return;
+
 	ieee80211_sta_reset_conn_monitor(sdata);
 }
 
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 3e5dbd4..d112f03 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -802,11 +802,11 @@ int cfg80211_wext_siwfreq(struct net_device *dev,
 			return freq;
 		if (freq == 0)
 			return -EINVAL;
-		wdev_lock(wdev);
 		mutex_lock(&rdev->devlist_mtx);
+		wdev_lock(wdev);
 		err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
-		mutex_unlock(&rdev->devlist_mtx);
 		wdev_unlock(wdev);
+		mutex_unlock(&rdev->devlist_mtx);
 		return err;
 	default:
 		return -EOPNOTSUPP;