summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorClaudiu Manoil <claudiu.manoil@freescale.com>2013-10-14 17:05:09 +0300
committerDavid S. Miller <davem@davemloft.net>2013-10-18 15:54:43 -0400
commit3ba405db1c1b05d157474c71e559393f7ea436ad (patch)
tree89895769b4a4a7e78674f7d1b4503b94ce20635b
parent9877b25382e770618d0a36a3024d8a3c67eee9ea (diff)
downloadop-kernel-dev-3ba405db1c1b05d157474c71e559393f7ea436ad.zip
op-kernel-dev-3ba405db1c1b05d157474c71e559393f7ea436ad.tar.gz
gianfar: Simplify MQ polling to avoid soft lockup
Under certain low traffic conditions, the single core devices with multiple Rx/Tx queues (MQ mode) may reach soft lockup due to gfar_poll not returning in proper time. The following exception was obtained using iperf on a 100Mbit half-duplex link, for a p1010 single core device: BUG: soft lockup - CPU#0 stuck for 23s! [iperf:2847] Modules linked in: CPU: 0 PID: 2847 Comm: iperf Not tainted 3.12.0-rc3 #16 task: e8bf8000 ti: eeb16000 task.ti: ee646000 NIP: c0255b6c LR: c0367ae8 CTR: c0461c18 REGS: eeb17e70 TRAP: 0901 Not tainted (3.12.0-rc3) MSR: 00029000 <CE,EE,ME> CR: 44228428 XER: 20000000 GPR00: c0367ad4 eeb17f20 e8bf8000 ee01f4b4 00000008 ffffffff ffffffff 00000000 GPR08: 000000c0 00000008 000000ff ffffffc0 000193fe NIP [c0255b6c] find_next_bit+0xb8/0xc4 LR [c0367ae8] gfar_poll+0xc8/0x1d8 Call Trace: [eeb17f20] [c0367ad4] gfar_poll+0xb4/0x1d8 (unreliable) [eeb17f70] [c0422100] net_rx_action+0xa4/0x158 [eeb17fa0] [c003ec6c] __do_softirq+0xcc/0x17c [eeb17ff0] [c000c28c] call_do_softirq+0x24/0x3c [ee647cc0] [c0004660] do_softirq+0x6c/0x94 [ee647ce0] [c003eb9c] local_bh_enable+0x9c/0xa0 [ee647cf0] [c0454fe8] tcp_prequeue_process+0xa4/0xdc [ee647d10] [c0457e44] tcp_recvmsg+0x498/0x96c [ee647d80] [c047b630] inet_recvmsg+0x40/0x64 [ee647da0] [c040ca8c] sock_recvmsg+0x90/0xc0 [ee647e30] [c040edb8] SyS_recvfrom+0x98/0xfc To prevent this, the outer while() loop has been removed allowing gfar_poll() to return faster even if there's still budget left. Also, there's no need to recompute the budget per Rx queue anymore. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c87
1 files changed, 38 insertions, 49 deletions
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index c4eaade..186dc4a 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2900,7 +2900,7 @@ static int gfar_poll(struct napi_struct *napi, int budget)
struct gfar_priv_rx_q *rx_queue = NULL;
int work_done = 0, work_done_per_q = 0;
int i, budget_per_q = 0;
- int has_tx_work;
+ int has_tx_work = 0;
unsigned long rstat_rxf;
int num_act_queues;
@@ -2915,62 +2915,51 @@ static int gfar_poll(struct napi_struct *napi, int budget)
if (num_act_queues)
budget_per_q = budget/num_act_queues;
- while (1) {
- has_tx_work = 0;
- for_each_set_bit(i, &gfargrp->tx_bit_map, priv->num_tx_queues) {
- tx_queue = priv->tx_queue[i];
- /* run Tx cleanup to completion */
- if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx]) {
- gfar_clean_tx_ring(tx_queue);
- has_tx_work = 1;
- }
+ for_each_set_bit(i, &gfargrp->tx_bit_map, priv->num_tx_queues) {
+ tx_queue = priv->tx_queue[i];
+ /* run Tx cleanup to completion */
+ if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx]) {
+ gfar_clean_tx_ring(tx_queue);
+ has_tx_work = 1;
}
+ }
- for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
- /* skip queue if not active */
- if (!(rstat_rxf & (RSTAT_CLEAR_RXF0 >> i)))
- continue;
-
- rx_queue = priv->rx_queue[i];
- work_done_per_q =
- gfar_clean_rx_ring(rx_queue, budget_per_q);
- work_done += work_done_per_q;
-
- /* finished processing this queue */
- if (work_done_per_q < budget_per_q) {
- /* clear active queue hw indication */
- gfar_write(&regs->rstat,
- RSTAT_CLEAR_RXF0 >> i);
- rstat_rxf &= ~(RSTAT_CLEAR_RXF0 >> i);
- num_act_queues--;
-
- if (!num_act_queues)
- break;
- /* recompute budget per Rx queue */
- budget_per_q =
- (budget - work_done) / num_act_queues;
- }
- }
+ for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
+ /* skip queue if not active */
+ if (!(rstat_rxf & (RSTAT_CLEAR_RXF0 >> i)))
+ continue;
- if (work_done >= budget)
- break;
+ rx_queue = priv->rx_queue[i];
+ work_done_per_q =
+ gfar_clean_rx_ring(rx_queue, budget_per_q);
+ work_done += work_done_per_q;
+
+ /* finished processing this queue */
+ if (work_done_per_q < budget_per_q) {
+ /* clear active queue hw indication */
+ gfar_write(&regs->rstat,
+ RSTAT_CLEAR_RXF0 >> i);
+ num_act_queues--;
+
+ if (!num_act_queues)
+ break;
+ }
+ }
- if (!num_act_queues && !has_tx_work) {
+ if (!num_act_queues && !has_tx_work) {
- napi_complete(napi);
+ napi_complete(napi);
- /* Clear the halt bit in RSTAT */
- gfar_write(&regs->rstat, gfargrp->rstat);
+ /* Clear the halt bit in RSTAT */
+ gfar_write(&regs->rstat, gfargrp->rstat);
- gfar_write(&regs->imask, IMASK_DEFAULT);
+ gfar_write(&regs->imask, IMASK_DEFAULT);
- /* If we are coalescing interrupts, update the timer
- * Otherwise, clear it
- */
- gfar_configure_coalescing(priv, gfargrp->rx_bit_map,
- gfargrp->tx_bit_map);
- break;
- }
+ /* If we are coalescing interrupts, update the timer
+ * Otherwise, clear it
+ */
+ gfar_configure_coalescing(priv, gfargrp->rx_bit_map,
+ gfargrp->tx_bit_map);
}
return work_done;
OpenPOWER on IntegriCloud