summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBart Tanghe <bart.tanghe@thomasmore.be>2014-10-08 12:14:32 +0200
committerThierry Reding <thierry.reding@gmail.com>2014-11-17 12:20:13 +0100
commite5a06dc5ac1f686d11b11488a88a63ab12e079cb (patch)
tree3a6c350a173bb47522c1ea15b553951392d04dea
parentcac7f2429872d3733dc3f9915857b1691da2eb2f (diff)
downloadop-kernel-dev-e5a06dc5ac1f686d11b11488a88a63ab12e079cb.zip
op-kernel-dev-e5a06dc5ac1f686d11b11488a88a63ab12e079cb.tar.gz
pwm: Add BCM2835 PWM driver
Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi) Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt30
-rw-r--r--drivers/pwm/Kconfig9
-rw-r--r--drivers/pwm/Makefile1
-rw-r--r--drivers/pwm/pwm-bcm2835.c205
4 files changed, 245 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
new file mode 100644
index 0000000..fb6fb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
@@ -0,0 +1,30 @@
+BCM2835 PWM controller (Raspberry Pi controller)
+
+Required properties:
+- compatible: should be "brcm,bcm2835-pwm"
+- reg: physical base address and length of the controller's registers
+- clock: This clock defines the base clock frequency of the PWM hardware
+ system, the period and the duty_cycle of the PWM signal is a multiple of
+ the base period.
+- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
+ the cells format.
+
+Examples:
+
+pwm@2020c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x2020c000 0x28>;
+ clocks = <&clk_pwm>;
+ #pwm-cells = <2>;
+};
+
+clocks {
+ ....
+ clk_pwm: pwm {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-frequency = <9200000>;
+ };
+ ....
+};
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index ef2dd2e..ddabe39 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -71,6 +71,15 @@ config PWM_BCM_KONA
To compile this driver as a module, choose M here: the module
will be called pwm-bcm-kona.
+config PWM_BCM2835
+ tristate "BCM2835 PWM support"
+ depends on ARCH_BCM2835
+ help
+ PWM framework driver for BCM2835 controller (Raspberry Pi)
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-bcm2835.
+
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c458606..88be33b 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
+obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
new file mode 100644
index 0000000..b4c7f95
--- /dev/null
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define PWM_CONTROL 0x000
+#define PWM_CONTROL_SHIFT(x) ((x) * 8)
+#define PWM_CONTROL_MASK 0xff
+#define PWM_MODE 0x80 /* set timer in PWM mode */
+#define PWM_ENABLE (1 << 0)
+#define PWM_POLARITY (1 << 4)
+
+#define PERIOD(x) (((x) * 0x10) + 0x10)
+#define DUTY(x) (((x) * 0x10) + 0x14)
+
+#define MIN_PERIOD 108 /* 9.2 MHz max. PWM clock */
+
+struct bcm2835_pwm {
+ struct pwm_chip chip;
+ struct device *dev;
+ unsigned long scaler;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct bcm2835_pwm, chip);
+}
+
+static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+ u32 value;
+
+ value = readl(pc->base + PWM_CONTROL);
+ value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+ value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+ writel(value, pc->base + PWM_CONTROL);
+
+ return 0;
+}
+
+static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+ u32 value;
+
+ value = readl(pc->base + PWM_CONTROL);
+ value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+ writel(value, pc->base + PWM_CONTROL);
+}
+
+static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+
+ if (period_ns <= MIN_PERIOD) {
+ dev_err(pc->dev, "period %d not supported, minimum %d\n",
+ period_ns, MIN_PERIOD);
+ return -EINVAL;
+ }
+
+ writel(duty_ns / pc->scaler, pc->base + DUTY(pwm->hwpwm));
+ writel(period_ns / pc->scaler, pc->base + PERIOD(pwm->hwpwm));
+
+ return 0;
+}
+
+static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+ u32 value;
+
+ value = readl(pc->base + PWM_CONTROL);
+ value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
+ writel(value, pc->base + PWM_CONTROL);
+
+ return 0;
+}
+
+static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+ u32 value;
+
+ value = readl(pc->base + PWM_CONTROL);
+ value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+ writel(value, pc->base + PWM_CONTROL);
+}
+
+static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+ u32 value;
+
+ value = readl(pc->base + PWM_CONTROL);
+
+ if (polarity == PWM_POLARITY_NORMAL)
+ value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
+ else
+ value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
+
+ writel(value, pc->base + PWM_CONTROL);
+
+ return 0;
+}
+
+static const struct pwm_ops bcm2835_pwm_ops = {
+ .request = bcm2835_pwm_request,
+ .free = bcm2835_pwm_free,
+ .config = bcm2835_pwm_config,
+ .enable = bcm2835_pwm_enable,
+ .disable = bcm2835_pwm_disable,
+ .set_polarity = bcm2835_set_polarity,
+ .owner = THIS_MODULE,
+};
+
+static int bcm2835_pwm_probe(struct platform_device *pdev)
+{
+ struct bcm2835_pwm *pc;
+ struct resource *res;
+ int ret;
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ pc->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pc->base))
+ return PTR_ERR(pc->base);
+
+ pc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pc->clk)) {
+ dev_err(&pdev->dev, "clock not found: %ld\n", PTR_ERR(pc->clk));
+ return PTR_ERR(pc->clk);
+ }
+
+ ret = clk_prepare_enable(pc->clk);
+ if (ret)
+ return ret;
+
+ pc->scaler = NSEC_PER_SEC / clk_get_rate(pc->clk);
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &bcm2835_pwm_ops;
+ pc->chip.npwm = 2;
+
+ platform_set_drvdata(pdev, pc);
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0)
+ goto add_fail;
+
+ return 0;
+
+add_fail:
+ clk_disable_unprepare(pc->clk);
+ return ret;
+}
+
+static int bcm2835_pwm_remove(struct platform_device *pdev)
+{
+ struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(pc->clk);
+
+ return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id bcm2835_pwm_of_match[] = {
+ { .compatible = "brcm,bcm2835-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
+
+static struct platform_driver bcm2835_pwm_driver = {
+ .driver = {
+ .name = "bcm2835-pwm",
+ .of_match_table = bcm2835_pwm_of_match,
+ },
+ .probe = bcm2835_pwm_probe,
+ .remove = bcm2835_pwm_remove,
+};
+module_platform_driver(bcm2835_pwm_driver);
+
+MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be");
+MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
+MODULE_LICENSE("GPL v2");
OpenPOWER on IntegriCloud