summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Ujfalusi <peter.ujfalusi@nokia.com>2010-06-07 10:50:39 +0300
committerLiam Girdwood <lrg@slimlogic.co.uk>2010-06-07 10:43:35 +0100
commit9d7db2b2cb507f31ff29e339e9ed2f825edb555d (patch)
treeecbb45951d65b823d869fa82342763dd43b4a959
parentddc29b0104d69e3742e6a9f23184fb6184614403 (diff)
downloadop-kernel-dev-9d7db2b2cb507f31ff29e339e9ed2f825edb555d.zip
op-kernel-dev-9d7db2b2cb507f31ff29e339e9ed2f825edb555d.tar.gz
ASoC: tlv320dac33: Add support for changing upper threshold
Upper threshold is used in mode7 of DAC33. Instead of hard wired UTHR, add control to change the upper threshold value. Changing upper threshold is not allowed when the playback is already running, since wrongly timed change in the UTHR can cause problems with the codec. With this control the length of the burst in mode7 can be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-rw-r--r--sound/soc/codecs/tlv320dac33.c57
1 files changed, 48 insertions, 9 deletions
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 65adc77..2fa946c 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -120,6 +120,8 @@ struct tlv320dac33_priv {
* samples */
unsigned int mode7_us_to_lthr; /* Time to reach lthr from uthr */
+ unsigned int uthr;
+
enum dac33_state state;
};
@@ -442,6 +444,39 @@ static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
return ret;
}
+static int dac33_get_uthr(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.integer.value[0] = dac33->uthr;
+
+ return 0;
+}
+
+static int dac33_set_uthr(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0;
+
+ if (dac33->substream)
+ return -EBUSY;
+
+ if (dac33->uthr == ucontrol->value.integer.value[0])
+ return 0;
+
+ if (ucontrol->value.integer.value[0] < (MODE7_LTHR + 10) ||
+ ucontrol->value.integer.value[0] > MODE7_UTHR)
+ ret = -EINVAL;
+ else
+ dac33->uthr = ucontrol->value.integer.value[0];
+
+ return ret;
+}
+
static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -506,6 +541,8 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = {
static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
dac33_get_nsample, dac33_set_nsample),
+ SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0,
+ dac33_get_uthr, dac33_set_uthr),
SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
dac33_get_fifo_mode, dac33_set_fifo_mode),
};
@@ -985,7 +1022,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream)
* Configure the threshold levels, and leave 10 sample space
* at the bottom, and also at the top of the FIFO
*/
- dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR));
+ dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(dac33->uthr));
dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR));
break;
default:
@@ -1052,8 +1089,8 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
break;
case DAC33_FIFO_MODE7:
dac33->mode7_us_to_lthr =
- SAMPLES_TO_US(substream->runtime->rate,
- MODE7_UTHR - MODE7_LTHR + 1);
+ SAMPLES_TO_US(substream->runtime->rate,
+ dac33->uthr - MODE7_LTHR + 1);
dac33->t_stamp1 = 0;
break;
default:
@@ -1104,7 +1141,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
struct snd_soc_codec *codec = socdev->card->codec;
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
unsigned long long t0, t1, t_now;
- unsigned int time_delta;
+ unsigned int time_delta, uthr;
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
@@ -1182,6 +1219,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
case DAC33_FIFO_MODE7:
spin_lock(&dac33->lock);
t0 = dac33->t_stamp1;
+ uthr = dac33->uthr;
spin_unlock(&dac33->lock);
t_now = ktime_to_us(ktime_get());
@@ -1194,7 +1232,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
* Either the timestamps are messed or equal. Report
* maximum delay
*/
- delay = MODE7_UTHR;
+ delay = uthr;
goto out;
}
@@ -1208,8 +1246,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
substream->runtime->rate,
time_delta);
- if (likely(MODE7_UTHR > samples_out))
- delay = MODE7_UTHR - samples_out;
+ if (likely(uthr > samples_out))
+ delay = uthr - samples_out;
else
delay = 0;
} else {
@@ -1227,8 +1265,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
time_delta);
delay = MODE7_LTHR + samples_in - samples_out;
- if (unlikely(delay > MODE7_UTHR))
- delay = MODE7_UTHR;
+ if (unlikely(delay > uthr))
+ delay = uthr;
}
break;
default:
@@ -1484,6 +1522,7 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client,
dac33->irq = client->irq;
dac33->nsample = NSAMPLE_MAX;
dac33->nsample_max = NSAMPLE_MAX;
+ dac33->uthr = MODE7_UTHR;
/* Disable FIFO use by default */
dac33->fifo_mode = DAC33_FIFO_BYPASS;
OpenPOWER on IntegriCloud