Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes this time are for incorrect device nodes in
  various ways, on on imx, berlin, exynos, ux500, uniphier, omap and
  meson.

  Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).

  Other bug fixes include
   - a partial revert of a broken tegra gpio patch
   - irq affinity for arm ccn
   - suspend on one Armada 385 machine
   - enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
   - turning on a regulator on beagleboard-x15 for HDMI
   - making the omap gpmc debug code visible
   - setup of orion network switch
   - a rare build regression for pxa"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
  thermal: exynos: Fix register read in TMU
  ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
  ARM: tegra: Comment out gpio-ranges properties
  ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
  drivers/perf: arm_pmu: avoid CPU device_node reference leak
  bus: arm-ccn: Fix irq affinity setting on CPU migration
  bus: arm-ccn: Handle correctly no-more-cpus case
  ARM: mvebu: correct a385-db-ap compatible string
  ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
  MAINTAINERS: Update Allwinner entry and add new maintainer
  ARM: ux500: modify initial levelshifter status
  ARM: pxa: fix pxa3xx DFI lockup hack
  Documentation: ARM: List new omap MMC requirements
  memory: omap-gpmc: dump "before" state before first modification
  memory: omap-gpmc: Fix unselectable debug option for GPMC
  ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
  ARM: dts: Fix audio card detection on Peach boards
  ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
  ARM: orion: Fix DSA platform device after mvmdio conversion
  ...

28 files changed, 103 insertions, 44 deletions

diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README
new file mode 100644
index 0000000..75645c4
--- /dev/null
+++ b/Documentation/arm/OMAP/README
@@ -0,0 +1,7 @@
+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL		NEW DEPENDENCIES
+v4.3+		Update is needed for custom .config files to make sure
+		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+		properly.
diff --git a/MAINTAINERS b/MAINTAINERS
index fb7d2e4..ddc88c0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -894,11 +894,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
+M:	Chen-Yu Tsai <wens@csie.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-N:	sun[x4567]i
+N:	sun[x456789]i
 
 ARM/Allwinner SoC Clock Support
 M:	Emilio López <emilio@elopez.com.ar>
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 568adf5..d55e3ea 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -402,11 +402,12 @@
 				/* SMPS9 unused */
 
 				ldo1_reg: ldo1 {
-					/* VDD_SD  */
+					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
+					regulator-always-on;
 				};
 
 				ldo2_reg: ldo2 {
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 89f5a95..4047621 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -46,7 +46,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a4849..d4dbd28 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -152,7 +152,7 @@
 		};
 
 		usb_phy2: phy@a2f400 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 14>;
@@ -170,7 +170,7 @@
 		};
 
 		usb_phy0: phy@b74000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 12>;
@@ -178,7 +178,7 @@
 		};
 
 		usb_phy1: phy@b78000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 13>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c..1b95da7 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -915,6 +915,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7d5b386..8f40c7e 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -878,6 +878,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b738ce0..6e444bb 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -588,10 +588,10 @@
 				status = "disabled";
 			};
 
-			uart2: serial@30870000 {
+			uart2: serial@30890000 {
 				compatible = "fsl,imx7d-uart",
 					     "fsl,imx6q-uart";
-				reg = <0x30870000 0x10000>;
+				reg = <0x30890000 0x10000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
 					<&clks IMX7D_UART2_ROOT_CLK>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 91146c3..5b04300 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "LogicPD Zoom DM3730 Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
 	gpio_keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 5484413..8c77c87 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -67,7 +67,7 @@
 
 	timer@c1109940 {
 		compatible = "amlogic,meson6-timer";
-		reg = <0xc1109940 0x14>;
+		reg = <0xc1109940 0x18>;
 		interrupts = <0 10 1>;
 	};
 
@@ -80,36 +80,37 @@
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson6-wdt";
 			reg = <0xc1109900 0x8>;
+			interrupts = <0 0 1>;
 		};
 
 		uart_AO: serial@c81004c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81004c0 0x14>;
+			reg = <0xc81004c0 0x18>;
 			interrupts = <0 90 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_A: serial@c81084c0 {
+		uart_A: serial@c11084c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084c0 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084c0 0x18>;
+			interrupts = <0 26 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_B: serial@c81084dc {
+		uart_B: serial@c11084dc {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084dc 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084dc 0x18>;
+			interrupts = <0 75 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_C: serial@c8108700 {
+		uart_C: serial@c1108700 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc8108700 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc1108700 0x18>;
+			interrupts = <0 93 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 16e8ce3..bb339d1 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 810cda7..9c2387b 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -56,7 +56,7 @@
 					/* VMMCI level-shifter enable */
 					default_hrefv60_cfg2 {
 						pins = "GPIO169_D22";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					default_hrefv60_cfg3 {
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 9d4f86e..d845bd1 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -234,7 +234,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 246>;
+		*/
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 1e204a6..819e2ae 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -258,7 +258,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 251>;
+		*/
 	};
 
 	apbdma: dma@0,60020000 {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index e058709..969b828 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -244,7 +244,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 224>;
+		*/
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index fe04fb5..c6938ad 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -349,7 +349,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 248>;
+		*/
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
index 33963ac..f80f772 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -85,7 +85,7 @@
 };
 
 &ethsc {
-	interrupts = <0 50 4>;
+	interrupts = <0 52 4>;
 };
 
 &serial0 {
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 4a87e86..7c21760 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -200,15 +200,15 @@ no_clk:
 		args.args_count = 0;
 		child_domain = of_genpd_get_from_provider(&args);
 		if (IS_ERR(child_domain))
-			goto next_pd;
+			continue;
 
 		if (of_parse_phandle_with_args(np, "power-domains",
 					 "#power-domain-cells", 0, &args) != 0)
-			goto next_pd;
+			continue;
 
 		parent_domain = of_genpd_get_from_provider(&args);
 		if (IS_ERR(parent_domain))
-			goto next_pd;
+			continue;
 
 		if (pm_genpd_add_subdomain(parent_domain, child_domain))
 			pr_warn("%s failed to add subdomain: %s\n",
@@ -216,8 +216,6 @@ no_clk:
 		else
 			pr_info("%s has as child subdomain: %s.\n",
 				parent_domain->name, child_domain->name);
-next_pd:
-		of_node_put(np);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b3a0dff..33d1460 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -49,6 +49,7 @@ config SOC_OMAP5
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP if PM
+	select ZONE_DMA if ARM_LPAE
 
 config SOC_AM33XX
 	bool "TI AM33XX"
@@ -78,6 +79,7 @@ config SOC_DRA7XX
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP if PM
+	select ZONE_DMA if ARM_LPAE
 
 config ARCH_OMAP2PLUS
 	bool
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 6133eaa..fb219a3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -106,6 +106,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 MACHINE_END
 
 static const char *const omap36xx_boards_compat[] __initconst = {
+	"ti,omap3630",
 	"ti,omap36xx",
 	NULL,
 };
@@ -243,6 +244,9 @@ static const char *const omap5_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
@@ -288,6 +292,9 @@ static const char *const dra74x_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= dra7xx_map_io,
@@ -308,6 +315,9 @@ static const char *const dra72x_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
 	.map_io		= dra7xx_map_io,
 	.init_early	= dra7xx_init_early,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ea56397..1dfe346 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -559,7 +559,14 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 
 void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 {
-	omap_sdrc_init(NULL, NULL);
+	/*
+	 * We still need this for omap2420 and omap3 PM to work, others are
+	 * using drivers/misc/sram.c already.
+	 */
+	if (of_machine_is_compatible("ti,omap2420") ||
+	    of_machine_is_compatible("ti,omap3"))
+		omap_sdrc_init(NULL, NULL);
+
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 06005d3..20ce2d3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -42,10 +42,6 @@
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-#ifdef CONFIG_PM
-
-#define ISRAM_START	0x5c000000
-#define ISRAM_SIZE	SZ_256K
 
 /*
  * NAND NFC: DFI bus arbitration subset
@@ -54,6 +50,11 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
 #define NDCR_ND_ARB_EN		(1 << 12)
 #define NDCR_ND_ARB_CNTL	(1 << 19)
 
+#ifdef CONFIG_PM
+
+#define ISRAM_START	0x5c000000
+#define ISRAM_SIZE	SZ_256K
+
 static void __iomem *sram;
 static unsigned long wakeup_src;
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 2235081..8861c36 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -495,7 +495,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 	d->netdev = &orion_ge00.dev;
 	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge00_shared.dev;
+		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
 	orion_switch_device.dev.platform_data = d;
 
 	platform_device_register(&orion_switch_device);
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 7d9879e..7082c72 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1184,11 +1184,12 @@ static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
 		if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
 			break;
 		target = cpumask_any_but(cpu_online_mask, cpu);
-		if (target < 0)
+		if (target >= nr_cpu_ids)
 			break;
 		perf_pmu_migrate_context(&dt->pmu, cpu, target);
 		cpumask_set_cpu(target, &dt->cpu);
-		WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+		if (ccn->irq)
+			WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
 	default:
 		break;
 	}
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c6a644b..6f31546 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -58,12 +58,18 @@ config OMAP_GPMC
 	  memory drives like NOR, NAND, OneNAND, SRAM.
 
 config OMAP_GPMC_DEBUG
-	bool
+	bool "Enable GPMC debug output and skip reset of GPMC during init"
 	depends on OMAP_GPMC
 	help
 	  Enables verbose debugging mostly to decode the bootloader provided
-	  timings. Enable this during development to configure devices
-	  connected to the GPMC bus.
+	  timings. To preserve the bootloader provided timings, the reset
+	  of GPMC is skipped during init. Enable this during development to
+	  configure devices connected to the GPMC bus.
+
+	  NOTE: In addition to matching the register setup with the bootloader
+	  you also need to match the GPMC FCLK frequency used by the
+	  bootloader or else the GPMC timings won't be identical with the
+	  bootloader timings.
 
 config MVEBU_DEVBUS
 	bool "Marvell EBU Device Bus Controller"
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 32ac049..6515dfc 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -696,7 +696,6 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
 	int div;
 	u32 l;
 
-	gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
 	div = gpmc_calc_divider(t->sync_clk);
 	if (div < 0)
 		return div;
@@ -1988,6 +1987,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	if (ret < 0)
 		goto err;
 
+	gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
 	ret = gpmc_cs_program_settings(cs, &gpmc_s);
 	if (ret < 0)
 		goto err;
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 2365a32..be3755c 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -823,9 +823,15 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu)
 		}
 
 		/* Now look up the logical CPU number */
-		for_each_possible_cpu(cpu)
-			if (dn == of_cpu_device_node_get(cpu))
+		for_each_possible_cpu(cpu) {
+			struct device_node *cpu_dn;
+
+			cpu_dn = of_cpu_device_node_get(cpu);
+			of_node_put(cpu_dn);
+
+			if (dn == cpu_dn)
 				break;
+		}
 
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0bae8cc..ca920b0 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -932,7 +932,7 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 
 	if (data->soc == SOC_ARCH_EXYNOS5260)
 		emul_con = EXYNOS5260_EMUL_CON;
-	if (data->soc == SOC_ARCH_EXYNOS5433)
+	else if (data->soc == SOC_ARCH_EXYNOS5433)
 		emul_con = EXYNOS5433_TMU_EMUL_CON;
 	else if (data->soc == SOC_ARCH_EXYNOS7)
 		emul_con = EXYNOS7_TMU_REG_EMUL_CON;