summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 09:58:09 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 09:58:09 -0800
commit16e024f30ce96ef5fa651e2914e19d175a924cab (patch)
treed68106151a0b36e22625d7af7b23081a48c92e87
parentc36e0501ee91d7616a188efbf9714b1fce150032 (diff)
parent376bddd34433065aeb9b9a140870537feecf90ef (diff)
downloadop-kernel-dev-16e024f30ce96ef5fa651e2914e19d175a924cab.zip
op-kernel-dev-16e024f30ce96ef5fa651e2914e19d175a924cab.tar.gz
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/raideng.txt81
-rw-r--r--Documentation/powerpc/ptrace.txt16
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c2
-rw-r--r--arch/powerpc/Makefile2
-rw-r--r--arch/powerpc/boot/dts/a3m071.dts144
-rw-r--r--arch/powerpc/boot/dts/fsl/p5020si-post.dtsi1
-rw-r--r--arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi6
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi85
-rw-r--r--arch/powerpc/configs/pseries_defconfig2
-rw-r--r--arch/powerpc/include/asm/bitops.h75
-rw-r--r--arch/powerpc/include/asm/cputable.h12
-rw-r--r--arch/powerpc/include/asm/dbell.h2
-rw-r--r--arch/powerpc/include/asm/exception-64s.h97
-rw-r--r--arch/powerpc/include/asm/firmware.h4
-rw-r--r--arch/powerpc/include/asm/fsl_gtm.h2
-rw-r--r--arch/powerpc/include/asm/fsl_guts.h4
-rw-r--r--arch/powerpc/include/asm/hvcall.h23
-rw-r--r--arch/powerpc/include/asm/immap_qe.h2
-rw-r--r--arch/powerpc/include/asm/machdep.h3
-rw-r--r--arch/powerpc/include/asm/mmu.h1
-rw-r--r--arch/powerpc/include/asm/pSeries_reconfig.h47
-rw-r--r--arch/powerpc/include/asm/ppc-opcode.h6
-rw-r--r--arch/powerpc/include/asm/prom.h16
-rw-r--r--arch/powerpc/include/asm/qe.h2
-rw-r--r--arch/powerpc/include/asm/qe_ic.h2
-rw-r--r--arch/powerpc/include/asm/reg.h3
-rw-r--r--arch/powerpc/include/asm/rtas.h5
-rw-r--r--arch/powerpc/include/asm/setup.h29
-rw-r--r--arch/powerpc/include/asm/ucc.h2
-rw-r--r--arch/powerpc/include/asm/ucc_fast.h2
-rw-r--r--arch/powerpc/include/asm/ucc_slow.h2
-rw-r--r--arch/powerpc/include/asm/udbg.h1
-rw-r--r--arch/powerpc/include/uapi/asm/setup.h31
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/cpu_setup_power.S (renamed from arch/powerpc/kernel/cpu_setup_power7.S)32
-rw-r--r--arch/powerpc/kernel/cputable.c38
-rw-r--r--arch/powerpc/kernel/entry_64.S2
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S308
-rw-r--r--arch/powerpc/kernel/head_64.S6
-rw-r--r--arch/powerpc/kernel/idle.c3
-rw-r--r--arch/powerpc/kernel/iommu.c16
-rw-r--r--arch/powerpc/kernel/machine_kexec.c14
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c8
-rw-r--r--arch/powerpc/kernel/pci_32.c2
-rw-r--r--arch/powerpc/kernel/prom.c7
-rw-r--r--arch/powerpc/kernel/prom_init.c11
-rw-r--r--arch/powerpc/kernel/ptrace.c90
-rw-r--r--arch/powerpc/kernel/rtas.c1
-rw-r--r--arch/powerpc/kernel/rtas_flash.c4
-rw-r--r--arch/powerpc/kernel/setup_64.c5
-rw-r--r--arch/powerpc/kernel/udbg.c23
-rw-r--r--arch/powerpc/mm/numa.c12
-rw-r--r--arch/powerpc/mm/tlb_nohash_low.S15
-rw-r--r--arch/powerpc/perf/power7-pmu.c17
-rw-r--r--arch/powerpc/platforms/512x/Kconfig1
-rw-r--r--arch/powerpc/platforms/512x/mpc5121_ads.c3
-rw-r--r--arch/powerpc/platforms/512x/mpc512x.h11
-rw-r--r--arch/powerpc/platforms/512x/mpc512x_shared.c25
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c2
-rw-r--r--arch/powerpc/platforms/52xx/mpc5200_simple.c1
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c16
-rw-r--r--arch/powerpc/platforms/82xx/pq2ads-pci-pic.c8
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_rdk.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c2
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c2
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c8
-rw-r--r--arch/powerpc/platforms/85xx/smp.c49
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c2
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_32.c5
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c25
-rw-r--r--arch/powerpc/platforms/ps3/os-area.c6
-rw-r--r--arch/powerpc/platforms/pseries/dlpar.c34
-rw-r--r--arch/powerpc/platforms/pseries/firmware.c1
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-cpu.c8
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-memory.c60
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c10
-rw-r--r--arch/powerpc/platforms/pseries/mobility.c4
-rw-r--r--arch/powerpc/platforms/pseries/plpar_wrappers.h31
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c119
-rw-r--r--arch/powerpc/platforms/pseries/setup.c77
-rw-r--r--arch/powerpc/platforms/pseries/smp.c1
-rw-r--r--arch/powerpc/sysdev/fsl_gtm.c2
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c37
-rw-r--r--arch/powerpc/sysdev/pmi.c13
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.h2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_io.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_fast.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/usb.c2
-rw-r--r--arch/powerpc/xmon/Makefile2
-rw-r--r--arch/powerpc/xmon/nonstdio.c53
-rw-r--r--arch/powerpc/xmon/nonstdio.h6
-rw-r--r--arch/powerpc/xmon/start.c34
-rw-r--r--arch/powerpc/xmon/xmon.c26
-rw-r--r--drivers/crypto/nx/nx-842.c20
-rw-r--r--drivers/crypto/nx/nx.c1
-rw-r--r--drivers/infiniband/hw/ehca/hcp_if.c20
-rw-r--r--drivers/macintosh/smu.c2
-rw-r--r--drivers/macintosh/windfarm_fcu_controls.c14
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c14
-rw-r--r--drivers/macintosh/windfarm_max6690_sensor.c13
-rw-r--r--drivers/macintosh/windfarm_smu_sat.c13
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_phyp.h20
-rw-r--r--drivers/of/base.c142
-rw-r--r--drivers/video/Kconfig8
-rw-r--r--drivers/video/gxt4500.c15
-rw-r--r--drivers/virt/fsl_hypervisor.c3
-rw-r--r--include/linux/of.h29
-rw-r--r--lib/Kconfig.debug10
-rw-r--r--lib/Makefile4
-rw-r--r--lib/of-reconfig-notifier-error-inject.c (renamed from lib/pSeries-reconfig-notifier-error-inject.c)22
116 files changed, 1545 insertions, 839 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 0000000..4ad29b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators. Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible: Should contain "fsl,raideng-v1.0" as the value
+ This identifies RAID Engine block. 1 in 1.0 represents
+ major number whereas 0 represents minor number. The
+ version matches the hardware IP version.
+- reg: offset and length of the register set for the device
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng: raideng@320000 {
+ compatible = "fsl,raideng-v1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x320000 0x10000>;
+ ranges = <0 0x320000 0x10000>;
+ };
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible: Should contain "fsl,raideng-v1.0-job-queue" as the value
+ This identifies the job queue interface
+- reg: offset and length of the register set for job queue
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng_jq0@1000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+ };
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible: Must contain "fsl,raideng-v1.0-job-ring" as the value
+ This identifies job ring. Should contain either
+ "fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+ depending upon whether ring has high or low priority
+- reg: offset and length of the register set for job ring
+- interrupts: interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn: Specifies the LIODN to be used for Job Ring. This
+ property is normally set by firmware. Value
+ is of 12-bits which is the LIODN number for this JR.
+ This property is used by the IOMMU (PAMU) to distinquish
+ transactions from this JR and than be able to do address
+ translation & protection accordingly.
+
+Example:
+ /* P5020 */
+ raideng_jq0@1000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+
+ raideng_jr0: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <139 2 0 0>;
+ interrupt-parent = <&mpic>;
+ fsl,liodn = <0x41>;
+ };
+ };
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
index f4a5499..f2a7a39 100644
--- a/Documentation/powerpc/ptrace.txt
+++ b/Documentation/powerpc/ptrace.txt
@@ -127,6 +127,22 @@ Some examples of using the structure to:
p.addr2 = (uint64_t) end_range;
p.condition_value = 0;
+- set a watchpoint in server processors (BookS)
+
+ p.version = 1;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ or
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+ * addr2 - addr <= 8 Bytes.
+ */
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
3. PTRACE_DELHWDEBUG
Takes an integer which identifies an existing breakpoint or watchpoint
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 9807037..c66129b 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -240,7 +240,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
macaddr[4] = (val >> 8) & 0xff;
macaddr[5] = (val >> 0) & 0xff;
- prom_update_property(np, newmac);
+ of_update_property(np, newmac);
}
}
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 159e94f..b639852 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -181,7 +181,7 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-%.dtb:
+%.dtb: scripts
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
new file mode 100644
index 0000000..877a28c
--- /dev/null
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -0,0 +1,144 @@
+/*
+ * a3m071 board Device Tree Source
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+ model = "anonymous,a3m071";
+ compatible = "anonymous,a3m071";
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; /* From boot loader */
+ system-frequency = <0>; /* From boot loader */
+
+ timer@600 {
+ fsl,has-wdt;
+ };
+
+ spi@f00 {
+ status = "disabled";
+ };
+
+ usb: usb@1000 {
+ status = "disabled";
+ };
+
+ psc@2000 {
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ psc@2200 {
+ status = "disabled";
+ };
+
+ psc@2400 {
+ status = "disabled";
+ };
+
+ psc@2600 {
+ status = "disabled";
+ };
+
+ psc@2800 {
+ status = "disabled";
+ };
+
+ psc@2c00 { // PSC6
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ phy0: ethernet-phy@3 {
+ reg = <0x03>;
+ };
+ };
+
+ ata@3a00 {
+ status = "disabled";
+ };
+
+ i2c@3d00 {
+ status = "disabled";
+ };
+
+ i2c@3d40 {
+ status = "disabled";
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe9000000 0x00080000
+ 5 0 0xe8000000 0x00010000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x0 0x02000000>;
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ partition@0x0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@0x00040000 {
+ label = "env";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@0x00060000 {
+ label = "dtb";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@0x00080000 {
+ label = "kernel";
+ reg = <0x00080000 0x00500000>;
+ };
+ partition@0x00580000 {
+ label = "root";
+ reg = <0x00580000 0x00A80000>;
+ };
+ };
+
+ fpga@3,0 {
+ compatible = "anonymous,a3m071-fpga";
+ reg = <3 0x0 0x00080000
+ 5 0x0 0x00010000>;
+ interrupts = <0 0 3>; /* level low */
+ };
+ };
+
+ pci@f0000d00 {
+ status = "disabled";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 64b6abe..5d7205b 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -354,4 +354,5 @@
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
+/include/ "qoriq-raid1.0-0.dtsi"
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 0a198b0..8df47fc 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -73,6 +73,12 @@
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ raideng = &raideng;
+ raideng_jr0 = &raideng_jr0;
+ raideng_jr1 = &raideng_jr1;
+ raideng_jr2 = &raideng_jr2;
+ raideng_jr3 = &raideng_jr3;
};
cpus {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
new file mode 100644
index 0000000..8d2e8aa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
@@ -0,0 +1,85 @@
+/*
+ * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+raideng: raideng@320000 {
+ compatible = "fsl,raideng-v1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x320000 0x10000>;
+ ranges = <0 0x320000 0x10000>;
+
+ raideng_jq0@1000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+
+ raideng_jr0: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <139 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ raideng_jr1: jr@400 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+ reg = <0x400 0x400>;
+ interrupts = <140 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ raideng_jq1@2000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2000 0x1000>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ raideng_jr2: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <141 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ raideng_jr3: jr@400 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+ reg = <0x400 0x400>;
+ interrupts = <142 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+};
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1f710a3..5b8e1e5 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -2,7 +2,7 @@ CONFIG_PPC64=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
+CONFIG_NR_CPUS=2048
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index dc2cf9c..ef918a2 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -52,8 +52,6 @@
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
-#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG))
-#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG)
#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
/* Macro for generating the ***_bits() functions */
@@ -83,22 +81,22 @@ DEFINE_BITOP(change_bits, xor, "", "")
static __inline__ void set_bit(int nr, volatile unsigned long *addr)
{
- set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+ set_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
{
- clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+ clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
{
- clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+ clear_bits_unlock(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void change_bit(int nr, volatile unsigned long *addr)
{
- change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+ change_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
@@ -136,26 +134,26 @@ DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
- return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+ return test_and_set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_set_bit_lock(unsigned long nr,
volatile unsigned long *addr)
{
- return test_and_set_bits_lock(BITOP_MASK(nr),
- addr + BITOP_WORD(nr)) != 0;
+ return test_and_set_bits_lock(BIT_MASK(nr),
+ addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
- return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+ return test_and_clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
- return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+ return test_and_change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
@@ -280,61 +278,8 @@ unsigned long __arch_hweight64(__u64 w);
#include <asm-generic/bitops/find.h>
/* Little-endian versions */
+#include <asm-generic/bitops/le.h>
-static __inline__ int test_bit_le(unsigned long nr,
- __const__ void *addr)
-{
- __const__ unsigned char *tmp = (__const__ unsigned char *) addr;
- return (tmp[nr >> 3] >> (nr & 7)) & 1;
-}
-
-static inline void set_bit_le(int nr, void *addr)
-{
- set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void clear_bit_le(int nr, void *addr)
-{
- clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void __set_bit_le(int nr, void *addr)
-{
- __set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void __clear_bit_le(int nr, void *addr)
-{
- __clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int test_and_set_bit_le(int nr, void *addr)
-{
- return test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int test_and_clear_bit_le(int nr, void *addr)
-{
- return test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int __test_and_set_bit_le(int nr, void *addr)
-{
- return __test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int __test_and_clear_bit_le(int nr, void *addr)
-{
- return __test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-#define find_first_zero_bit_le(addr, size) \
- find_next_zero_bit_le((addr), (size), 0)
-unsigned long find_next_zero_bit_le(const void *addr,
- unsigned long size, unsigned long offset);
-
-unsigned long find_next_bit_le(const void *addr,
- unsigned long size, unsigned long offset);
/* Bitmap functions for the ext2 filesystem */
#include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 21a0687..76f81bd 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -401,6 +401,14 @@ extern const char *powerpc_base_platform;
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
+#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
+ CPU_FTR_MMCRA | CPU_FTR_SMT | \
+ CPU_FTR_COHERENT_ICACHE | \
+ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+ CPU_FTR_DSCR | CPU_FTR_SAO | \
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -421,8 +429,8 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
- CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
- CPU_FTR_VSX)
+ CPU_FTRS_POWER7 | CPU_FTRS_POWER8 | CPU_FTRS_CELL | \
+ CPU_FTRS_PA6T | CPU_FTR_VSX)
#endif
#else
enum {
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 154c067..607e4ee 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semicondutor, Inc.
+ * Copyright 2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index a43c147..ad708dd 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -48,6 +48,35 @@
#define EX_LR 72
#define EX_CFAR 80
+#ifdef CONFIG_RELOCATABLE
+#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
+ ld r12,PACAKBASE(r13); /* get high part of &label */ \
+ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
+ LOAD_HANDLER(r12,label); \
+ mtlr r12; \
+ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
+ li r10,MSR_RI; \
+ mtmsrd r10,1; /* Set RI (EE=0) */ \
+ blr;
+#else
+/* If not relocatable, we can jump directly -- and save messing with LR */
+#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
+ mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
+ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
+ li r10,MSR_RI; \
+ mtmsrd r10,1; /* Set RI (EE=0) */ \
+ b label;
+#endif
+
+/*
+ * As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on
+ * so no need to rfid. Save lr in case we're CONFIG_RELOCATABLE, in which
+ * case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr.
+ */
+#define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec) \
+ EXCEPTION_PROLOG_1(area, extra, vec); \
+ EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
+
/*
* We're short on space and time in the exception prolog, so we can't
* use the normal SET_REG_IMMEDIATE macro. Normally we just need the
@@ -55,12 +84,29 @@
* word.
*/
#define LOAD_HANDLER(reg, label) \
- addi reg,reg,(label)-_stext; /* virt addr of handler ... */
+ /* Handlers must be within 64K of kbase, which must be 64k aligned */ \
+ ori reg,reg,(label)-_stext; /* virt addr of handler ... */
/* Exception register prefixes */
#define EXC_HV H
#define EXC_STD
+#if defined(CONFIG_RELOCATABLE)
+/*
+ * If we support interrupts with relocation on AND we're a relocatable
+ * kernel, we need to use LR to get to the 2nd level handler. So, save/restore
+ * it when required.
+ */
+#define SAVE_LR(reg, area) mflr reg ; std reg,area+EX_LR(r13)
+#define GET_LR(reg, area) ld reg,area+EX_LR(r13)
+#define RESTORE_LR(reg, area) ld reg,area+EX_LR(r13) ; mtlr reg
+#else
+/* ...else LR is unused and in register. */
+#define SAVE_LR(reg, area)
+#define GET_LR(reg, area) mflr reg
+#define RESTORE_LR(reg, area)
+#endif
+
#define __EXCEPTION_PROLOG_1(area, extra, vec) \
GET_PACA(r13); \
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
@@ -69,6 +115,7 @@
mfspr r10,SPRN_CFAR; \
std r10,area+EX_CFAR(r13); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
+ SAVE_LR(r10, area); \
mfcr r9; \
extra(vec); \
std r11,area+EX_R11(r13); \
@@ -169,6 +216,7 @@ do_kvm_##n: \
sth r1,PACA_TRAP_SAVE(r13); \
std r3,area+EX_R3(r13); \
addi r3,r13,area; /* r3 -> where regs are saved*/ \
+ RESTORE_LR(r1, area); \
b bad_stack; \
3: std r9,_CCR(r1); /* save CR in stackframe */ \
std r11,_NIP(r1); /* save SRR0 in stackframe */ \
@@ -194,8 +242,8 @@ do_kvm_##n: \
ld r10,area+EX_CFAR(r13); \
std r10,ORIG_GPR3(r1); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
+ GET_LR(r9,area); /* Get LR, later save to stack */ \
ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
- mflr r9; /* save LR in stackframe */ \
std r9,_LINK(r1); \
mfctr r10; /* save CTR in stackframe */ \
std r10,_CTR(r1); \
@@ -232,6 +280,26 @@ label##_hv: \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
EXC_HV, KVMTEST, vec)
+#define STD_RELON_EXCEPTION_PSERIES(loc, vec, label) \
+ . = loc; \
+ .globl label##_relon_pSeries; \
+label##_relon_pSeries: \
+ HMT_MEDIUM; \
+ /* No guest interrupts come through here */ \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
+ EXC_STD, KVMTEST_PR, vec)
+
+#define STD_RELON_EXCEPTION_HV(loc, vec, label) \
+ . = loc; \
+ .globl label##_relon_hv; \
+label##_relon_hv: \
+ HMT_MEDIUM; \
+ /* No guest interrupts come through here */ \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
+ EXC_HV, KVMTEST, vec)
+
/* This associate vector numbers with bits in paca->irq_happened */
#define SOFTEN_VALUE_0x500 PACA_IRQ_EE
#define SOFTEN_VALUE_0x502 PACA_IRQ_EE
@@ -257,6 +325,9 @@ label##_hv: \
KVMTEST(vec); \
_SOFTEN_TEST(EXC_STD, vec)
+#define SOFTEN_NOTEST_PR(vec) _SOFTEN_TEST(EXC_STD, vec)
+#define SOFTEN_NOTEST_HV(vec) _SOFTEN_TEST(EXC_HV, vec)
+
#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \
HMT_MEDIUM; \
SET_SCRATCH0(r13); /* save r13 */ \
@@ -279,6 +350,28 @@ label##_hv: \
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_TEST_HV)
+#define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
+ HMT_MEDIUM; \
+ SET_SCRATCH0(r13); /* save r13 */ \
+ __EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \
+ EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h);
+#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
+ __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)
+
+#define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label) \
+ . = loc; \
+ .globl label##_relon_pSeries; \
+label##_relon_pSeries: \
+ _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
+ EXC_STD, SOFTEN_NOTEST_PR)
+
+#define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label) \
+ . = loc; \
+ .globl label##_relon_hv; \
+label##_relon_hv: \
+ _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
+ EXC_HV, SOFTEN_NOTEST_HV)
+
/*
* Our exception common code can be passed various "additions"
* to specify the behaviour of interrupts, whether to kick the
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index ad0b751..973cc3b 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -49,6 +49,7 @@
#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
#define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000)
+#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000)
#ifndef __ASSEMBLY__
@@ -62,7 +63,8 @@ enum {
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
- FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
+ FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
+ FW_FEATURE_SET_MODE,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
FW_FEATURE_POWERNV_ALWAYS = 0,
diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
index 8e8c9b5..3b05808 100644
--- a/arch/powerpc/include/asm/fsl_gtm.h
+++ b/arch/powerpc/include/asm/fsl_gtm.h
@@ -1,7 +1,7 @@
/*
* Freescale General-purpose Timers Module
*
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright 2006 Freescale Semiconductor, Inc.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
index dd5ba2c..77ced0b 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -71,7 +71,9 @@ struct ccsr_guts {
u8 res0c4[0x224 - 0xc4];
__be32 iodelay1; /* 0x.0224 - IO delay control register 1 */
__be32 iodelay2; /* 0x.0228 - IO delay control register 2 */
- u8 res22c[0x800 - 0x22c];
+ u8 res22c[0x604 - 0x22c];
+ __be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */
+ u8 res608[0x800 - 0x608];
__be32 clkdvdr; /* 0x.0800 - Clock Divide Register */
u8 res804[0x900 - 0x804];
__be32 ircr; /* 0x.0900 - Infrared Control Register */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 7a86706..0975e5c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -267,7 +267,8 @@
#define H_RANDOM 0x300
#define H_COP 0x304
#define H_GET_MPP_X 0x314
-#define MAX_HCALL_OPCODE H_GET_MPP_X
+#define H_SET_MODE 0x31C
+#define MAX_HCALL_OPCODE H_SET_MODE
#ifndef __ASSEMBLY__
@@ -355,6 +356,26 @@ struct hvcall_mpp_x_data {
int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+static inline unsigned int get_longbusy_msecs(int longbusy_rc)
+{
+ switch (longbusy_rc) {
+ case H_LONG_BUSY_ORDER_1_MSEC:
+ return 1;
+ case H_LONG_BUSY_ORDER_10_MSEC:
+ return 10;
+ case H_LONG_BUSY_ORDER_100_MSEC:
+ return 100;
+ case H_LONG_BUSY_ORDER_1_SEC:
+ return 1000;
+ case H_LONG_BUSY_ORDER_10_SEC:
+ return 10000;
+ case H_LONG_BUSY_ORDER_100_SEC:
+ return 100000;
+ default:
+ return 1;
+ }
+}
+
#ifdef CONFIG_PPC_PSERIES
extern int CMO_PrPSP;
extern int CMO_SecPSP;
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 61e8490..bedbff8 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -3,7 +3,7 @@
* The Internal Memory Map for devices with QE on them. This
* is the superset of all QE devices (8360, etc.).
- * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 3c82daf..19d9d96 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -166,9 +166,6 @@ struct machdep_calls {
unsigned long size,
pgprot_t vma_prot);
- /* Idle loop for this platform, leave empty for default idle loop */
- void (*idle_loop)(void);
-
/*
* Function for waiting for work with reduced power in idle loop;
* called with interrupts disabled.
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 5e38eed..691fd8a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -101,6 +101,7 @@
#define MMU_FTRS_POWER5 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_POWER6 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_POWER7 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER8 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_CELL MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
MMU_FTR_CI_LARGE_PAGE
#define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
deleted file mode 100644
index c07edfe..0000000
--- a/arch/powerpc/include/asm/pSeries_reconfig.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _PPC64_PSERIES_RECONFIG_H
-#define _PPC64_PSERIES_RECONFIG_H
-#ifdef __KERNEL__
-
-#include <linux/notifier.h>
-
-/*
- * Use this API if your code needs to know about OF device nodes being
- * added or removed on pSeries systems.
- */
-
-#define PSERIES_RECONFIG_ADD 0x0001
-#define PSERIES_RECONFIG_REMOVE 0x0002
-#define PSERIES_DRCONF_MEM_ADD 0x0003
-#define PSERIES_DRCONF_MEM_REMOVE 0x0004
-#define PSERIES_UPDATE_PROPERTY 0x0005
-
-/**
- * pSeries_reconfig_notify - Notifier value structure for OFDT property updates
- *
- * @node: Device tree node which owns the property being updated
- * @property: Updated property
- */
-struct pSeries_reconfig_prop_update {
- struct device_node *node;
- struct property *property;
-};
-
-#ifdef CONFIG_PPC_PSERIES
-extern int pSeries_reconfig_notifier_register(struct notifier_block *);
-extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
-extern int pSeries_reconfig_notify(unsigned long action, void *p);
-/* Not the best place to put this, will be fixed when we move some
- * of the rtas suspend-me stuff to pseries */
-extern void pSeries_coalesce_init(void);
-#else /* !CONFIG_PPC_PSERIES */
-static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
-{
- return 0;
-}
-static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
-static inline void pSeries_coalesce_init(void) { }
-#endif /* CONFIG_PPC_PSERIES */
-
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 42b1f43..51fb00a 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semicondutor, Inc.
+ * Copyright 2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -86,6 +86,7 @@
#define PPC_INST_DCBA_MASK 0xfc0007fe
#define PPC_INST_DCBAL 0x7c2005ec
#define PPC_INST_DCBZL 0x7c2007ec
+#define PPC_INST_ICBT 0x7c00002c
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
@@ -201,6 +202,7 @@
#define __PPC_MB(s) (((s) & 0x1f) << 6)
#define __PPC_ME(s) (((s) & 0x1f) << 1)
#define __PPC_BI(s) (((s) & 0x1f) << 16)
+#define __PPC_CT(t) (((t) & 0x0f) << 21)
/*
* Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
@@ -263,6 +265,8 @@
__PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \
__PPC_RT(t) | __PPC_RB(b))
+#define PPC_ICBT(c,a,b) stringify_in_c(.long PPC_INST_ICBT | \
+ __PPC_CT(c) | __PPC_RA0(a) | __PPC_RB(b))
/* PASemi instructions */
#define LBZCIX(t,a,b) stringify_in_c(.long PPC_INST_LBZCIX | \
__PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b))
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index b5c9190..99c92d5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -58,6 +58,22 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
extern void of_instantiate_rtc(void);
+/* The of_drconf_cell struct defines the layout of the LMB array
+ * specified in the device tree property
+ * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory
+ */
+struct of_drconf_cell {
+ u64 base_addr;
+ u32 drc_index;
+ u32 reserved;
+ u32 aa_index;
+ u32 flags;
+};
+
+#define DRCONF_MEM_ASSIGNED 0x00000008
+#define DRCONF_MEM_AI_INVALID 0x00000040
+#define DRCONF_MEM_RESERVED 0x00000080
+
/* These includes are put at the bottom because they may contain things
* that are overridden by this file. Ideally they shouldn't be included
* by this file, but there are a bunch of .c files that currently depend
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 229571a..32b9bfa 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index f706164..25784cc 100644
--- a/arch/powerpc/include/asm/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 97d3727..3d5c9dc 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -249,6 +249,8 @@
#define LPCR_RMLS 0x1C000000 /* impl dependent rmo limit sel */
#define LPCR_RMLS_SH (63-37)
#define LPCR_ILE 0x02000000 /* !HV irqs set MSR:LE */
+#define LPCR_AIL_0 0x00000000 /* MMU off exception offset 0x0 */
+#define LPCR_AIL_3 0x01800000 /* MMU on exception offset 0xc00...4xxx */
#define LPCR_PECE 0x00007000 /* powersave exit cause enable */
#define LPCR_PECE0 0x00004000 /* ext. exceptions can cause exit */
#define LPCR_PECE1 0x00002000 /* decrementer can cause exit */
@@ -1030,6 +1032,7 @@
#define PVR_970MP 0x0044
#define PVR_970GX 0x0045
#define PVR_POWER7p 0x004A
+#define PVR_POWER8 0x004B
#define PVR_BE 0x0070
#define PVR_PA6T 0x0090
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 557cff8..aef00c6 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -353,8 +353,13 @@ static inline int page_is_rtas_user_buf(unsigned long pfn)
return 1;
return 0;
}
+
+/* Not the best place to put pSeries_coalesce_init, will be fixed when we
+ * move some of the rtas suspend-me stuff to pseries */
+extern void pSeries_coalesce_init(void);
#else
static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
+static inline void pSeries_coalesce_init(void) { }
#endif
extern int call_rtas(const char *, int, int, unsigned long *, ...);
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
new file mode 100644
index 0000000..d3ca855
--- /dev/null
+++ b/arch/powerpc/include/asm/setup.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_SETUP_H
+#define _ASM_POWERPC_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern void ppc_printk_progress(char *s, unsigned short hex);
+
+extern unsigned int rtas_data;
+extern int mem_init_done; /* set on boot once kmalloc can be called */
+extern int init_bootmem_done; /* set once bootmem is available */
+extern unsigned long long memory_limit;
+extern unsigned long klimit;
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+/* Used in very early kernel initialization. */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_SETUP_H */
+
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
index 46b09ba..6927ac2 100644
--- a/arch/powerpc/include/asm/ucc.h
+++ b/arch/powerpc/include/asm/ucc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
index 4644c84..72ea9ba 100644
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -1,7 +1,7 @@
/*
* Internal header file for UCC FAST unit routines.
*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
index cf131ff..c44131e 100644
--- a/arch/powerpc/include/asm/ucc_slow.h
+++ b/arch/powerpc/include/asm/ucc_slow.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index b303881..5a7510e 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -21,7 +21,6 @@ extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
extern int udbg_write(const char *s, int n);
-extern int udbg_read(char *buf, int buflen);
extern void register_early_udbg_console(void);
extern void udbg_printf(const char *fmt, ...)
diff --git a/arch/powerpc/include/uapi/asm/setup.h b/arch/powerpc/include/uapi/asm/setup.h
index 8b9a306..552df83 100644
--- a/arch/powerpc/include/uapi/asm/setup.h
+++ b/arch/powerpc/include/uapi/asm/setup.h
@@ -1,32 +1 @@
-#ifndef _ASM_POWERPC_SETUP_H
-#define _ASM_POWERPC_SETUP_H
-
#include <asm-generic/setup.h>
-
-#ifndef __ASSEMBLY__
-extern void ppc_printk_progress(char *s, unsigned short hex);
-
-extern unsigned int rtas_data;
-extern int mem_init_done; /* set on boot once kmalloc can be called */
-extern int init_bootmem_done; /* set once bootmem is available */
-extern unsigned long long memory_limit;
-extern unsigned long klimit;
-extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
-
-extern void via_cuda_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-/* Used in very early kernel initialization. */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern void reloc_got2(unsigned long);
-
-#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x)))
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index cde12f8..8f61934 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,7 +38,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
-obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
+obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power.S
index 76797c5..57cf140 100644
--- a/arch/powerpc/kernel/cpu_setup_power7.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -27,6 +27,7 @@ _GLOBAL(__setup_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
bl __init_LPCR
bl __init_TLB
mtlr r11
@@ -39,6 +40,35 @@ _GLOBAL(__restore_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+_GLOBAL(__setup_cpu_power8)
+ mflr r11
+ bl __init_hvmode_206
+ mtlr r11
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ oris r3, r3, LPCR_AIL_3@h
+ bl __init_LPCR
+ bl __init_TLB
+ mtlr r11
+ blr
+
+_GLOBAL(__restore_cpu_power8)
+ mflr r11
+ mfmsr r3
+ rldicl. r0,r3,4,63
+ beqlr
+ li r0,0
+ mtspr SPRN_LPID,r0
+ mfspr r3,SPRN_LPCR
+ oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_TLB
mtlr r11
@@ -57,6 +87,7 @@ __init_hvmode_206:
__init_LPCR:
/* Setup a sane LPCR:
+ * Called with initial LPCR in R3
*
* LPES = 0b01 (HSRR0/1 used for 0x500)
* PECE = 0b111
@@ -67,7 +98,6 @@ __init_LPCR:
*
* Other bits untouched for now
*/
- mfspr r3,SPRN_LPCR
li r5,1
rldimi r3,r5, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 0514c21..75a3d71 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -68,6 +68,8 @@ extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
+extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power8(void);
extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
@@ -94,6 +96,10 @@ extern void __restore_cpu_e5500(void);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER8 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+ PPC_FEATURE_TRUE_LE | \
+ PPC_FEATURE_PSERIES_PERFMON_COMPAT)
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_HAS_ALTIVEC_COMP)
@@ -429,6 +435,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7",
},
+ { /* 2.07-compliant processor, i.e. Power8 "architected" mode */
+ .pvr_mask = 0xffffffff,
+ .pvr_value = 0x0f000004,
+ .cpu_name = "POWER8 (architected)",
+ .cpu_features = CPU_FTRS_POWER8,
+ .cpu_user_features = COMMON_USER_POWER8,
+ .mmu_features = MMU_FTRS_POWER8,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .cpu_setup = __setup_cpu_power8,
+ .cpu_restore = __restore_cpu_power8,
+ .platform = "power8",
+ },
{ /* Power7 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003f0000,
@@ -463,6 +484,23 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
+ { /* Power8 */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x004b0000,
+ .cpu_name = "POWER8 (raw)",
+ .cpu_features = CPU_FTRS_POWER8,
+ .cpu_user_features = COMMON_USER_POWER8,
+ .mmu_features = MMU_FTRS_POWER8,
+ .icache_bsize = 128,
+ .dcache_bsize = 128,
+ .num_pmcs = 6,
+ .pmc_type = PPC_PMC_IBM,
+ .oprofile_cpu_type = "ppc64/power8",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .cpu_setup = __setup_cpu_power8,
+ .cpu_restore = __restore_cpu_power8,
+ .platform = "power8",
+ },
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index e9a906c..b310a05 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -373,6 +373,8 @@ _GLOBAL(ret_from_fork)
_GLOBAL(ret_from_kernel_thread)
bl .schedule_tail
REST_NVGPRS(r1)
+ li r3,0
+ std r3,0(r1)
ld r14, 0(r14)
mtlr r14
mr r3,r15
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 10b658a..4665e82 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -19,12 +19,76 @@
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x0100 - 0x17ff : pSeries Interrupt prologs
+ * 0x1800 - 0x4000 : interrupt support common interrupt prologs
+ * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
+ * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
* 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - : Early init and support code
+ * 0x8000 - 0x8fff : Initial (CPU0) segment table
+ * 0x9000 - : Early init and support code
*/
+ /* Syscall routine is used twice, in reloc-off and reloc-on paths */
+#define SYSCALL_PSERIES_1 \
+BEGIN_FTR_SECTION \
+ cmpdi r0,0x1ebe ; \
+ beq- 1f ; \
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
+ mr r9,r13 ; \
+ GET_PACA(r13) ; \
+ mfspr r11,SPRN_SRR0 ; \
+0:
+
+#define SYSCALL_PSERIES_2_RFID \
+ mfspr r12,SPRN_SRR1 ; \
+ ld r10,PACAKBASE(r13) ; \
+ LOAD_HANDLER(r10, system_call_entry) ; \
+ mtspr SPRN_SRR0,r10 ; \
+ ld r10,PACAKMSR(r13) ; \
+ mtspr SPRN_SRR1,r10 ; \
+ rfid ; \
+ b . ; /* prevent speculative execution */
+
+#define SYSCALL_PSERIES_3 \
+ /* Fast LE/BE switch system call */ \
+1: mfspr r12,SPRN_SRR1 ; \
+ xori r12,r12,MSR_LE ; \
+ mtspr SPRN_SRR1,r12 ; \
+ rfid ; /* return to userspace */ \
+ b . ; \
+2: mfspr r12,SPRN_SRR1 ; \
+ andi. r12,r12,MSR_PR ; \
+ bne 0b ; \
+ mtspr SPRN_SRR0,r3 ; \
+ mtspr SPRN_SRR1,r4 ; \
+ mtspr SPRN_SDR1,r5 ; \
+ rfid ; \
+ b . ; /* prevent speculative execution */
+
+#if defined(CONFIG_RELOCATABLE)
+ /*
+ * We can't branch directly; in the direct case we use LR
+ * and system_call_entry restores LR. (We thus need to move
+ * LR to r10 in the RFID case too.)
+ */
+#define SYSCALL_PSERIES_2_DIRECT \
+ mflr r10 ; \
+ ld r12,PACAKBASE(r13) ; \
+ LOAD_HANDLER(r12, system_call_entry_direct) ; \
+ mtlr r12 ; \
+ mfspr r12,SPRN_SRR1 ; \
+ /* Re-use of r13... No spare regs to do this */ \
+ li r13,MSR_RI ; \
+ mtmsrd r13,1 ; \
+ GET_PACA(r13) ; /* get r13 back */ \
+ blr ;
+#else
+ /* We can branch directly */
+#define SYSCALL_PSERIES_2_DIRECT \
+ mfspr r12,SPRN_SRR1 ; \
+ li r10,MSR_RI ; \
+ mtmsrd r10,1 ; /* Set RI (EE=0) */ \
+ b system_call_entry_direct ;
+#endif
/*
* This is the start of the interrupt handlers for pSeries
@@ -207,31 +271,11 @@ system_call_pSeries:
KVMTEST(0xc00)
GET_SCRATCH0(r13)
#endif
-BEGIN_FTR_SECTION
- cmpdi r0,0x1ebe
- beq- 1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
- mr r9,r13
- GET_PACA(r13)
- mfspr r11,SPRN_SRR0
- mfspr r12,SPRN_SRR1
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, system_call_entry)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b . /* prevent speculative execution */
-
+ SYSCALL_PSERIES_1
+ SYSCALL_PSERIES_2_RFID
+ SYSCALL_PSERIES_3
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
-/* Fast LE/BE switch system call */
-1: mfspr r12,SPRN_SRR1
- xori r12,r12,MSR_LE
- mtspr SPRN_SRR1,r12
- rfid /* return to userspace */
- b .
-
STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00)
@@ -276,7 +320,7 @@ vsx_unavailable_pSeries_1:
KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
. = 0x1500
- .global denorm_Hypervisor
+ .global denorm_exception_hv
denorm_exception_hv:
HMT_MEDIUM
mtspr SPRN_SPRG_HSCRATCH0,r13
@@ -311,12 +355,14 @@ denorm_exception_hv:
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+#else
+ . = 0x1800
#endif /* CONFIG_CBE_RAS */
- . = 0x3000
/*** Out of line interrupts support ***/
+ .align 7
/* moved from 0x200 */
machine_check_pSeries:
.globl machine_check_fwnmi
@@ -575,16 +621,12 @@ slb_miss_user_pseries:
b . /* prevent spec. execution */
#endif /* __DISABLED__ */
- .align 7
- .globl __end_interrupts
-__end_interrupts:
-
/*
* Code from here down to __end_handlers is invoked from the
* exception prologs above. Because the prologs assemble the
* addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
+ * which uses an ori instruction, these handlers must be in
+ * the first 64k of the kernel image.
*/
/*** Common interrupt handlers ***/
@@ -613,8 +655,8 @@ machine_check_common:
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
- STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+ STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
@@ -629,7 +671,158 @@ machine_check_common:
STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
+ /*
+ * Relocation-on interrupts: A subset of the interrupts can be delivered
+ * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
+ * it. Addresses are the same as the original interrupt addresses, but
+ * offset by 0xc000000000004000.
+ * It's impossible to receive interrupts below 0x300 via this mechanism.
+ * KVM: None of these traps are from the guest ; anything that escalated
+ * to HV=1 from HV=0 is delivered via real mode handlers.
+ */
+
+ /*
+ * This uses the standard macro, since the original 0x300 vector
+ * only has extra guff for STAB-based processors -- which never
+ * come here.
+ */
+ STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
+ . = 0x4380
+ .globl data_access_slb_relon_pSeries
+data_access_slb_relon_pSeries:
+ HMT_MEDIUM
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_DAR
+ mfspr r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ /*
+ * We can't just use a direct branch to .slb_miss_realmode
+ * because the distance from here to there depends on where
+ * the kernel ends up being put.
+ */
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
+ . = 0x4480
+ .globl instruction_access_slb_relon_pSeries
+instruction_access_slb_relon_pSeries:
+ HMT_MEDIUM
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
+ mfspr r12,SPRN_SRR1
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ . = 0x4500
+ .globl hardware_interrupt_relon_pSeries;
+ .globl hardware_interrupt_relon_hv;
+hardware_interrupt_relon_pSeries:
+hardware_interrupt_relon_hv:
+ BEGIN_FTR_SECTION
+ _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
+ FTR_SECTION_ELSE
+ _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_206)
+ STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
+ STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
+ STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
+ MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
+ STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
+ STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
+
+ . = 0x4c00
+ .globl system_call_relon_pSeries
+system_call_relon_pSeries:
+ HMT_MEDIUM
+ SYSCALL_PSERIES_1
+ SYSCALL_PSERIES_2_DIRECT
+ SYSCALL_PSERIES_3
+
+ STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
+
+ . = 0x4e00
+ b h_data_storage_relon_hv
+
+ . = 0x4e20
+ b h_instr_storage_relon_hv
+
+ . = 0x4e40
+ b emulation_assist_relon_hv
+
+ . = 0x4e50
+ b hmi_exception_relon_hv
+
+ . = 0x4e60
+ b hmi_exception_relon_hv
+
+ /* For when we support the doorbell interrupt:
+ STD_RELON_EXCEPTION_HYPERVISOR(0x4e80, 0xe80, doorbell_hyper)
+ */
+
+performance_monitor_relon_pSeries_1:
+ . = 0x4f00
+ b performance_monitor_relon_pSeries
+
+altivec_unavailable_relon_pSeries_1:
+ . = 0x4f20
+ b altivec_unavailable_relon_pSeries
+
+vsx_unavailable_relon_pSeries_1:
+ . = 0x4f40
+ b vsx_unavailable_relon_pSeries
+
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5200, 0x1202, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+ STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
+#ifdef CONFIG_PPC_DENORMALISATION
+ . = 0x5500
+ b denorm_exception_hv
+#endif
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5600, 0x1602, cbe_maintenance)
+#else
+#ifdef CONFIG_HVC_SCOM
+ STD_RELON_EXCEPTION_HV(0x5600, 0x1600, maintence_interrupt)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1600)
+#endif /* CONFIG_HVC_SCOM */
+#endif /* CONFIG_CBE_RAS */
+ STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+ STD_RELON_EXCEPTION_HV(0x5800, 0x1802, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+ /* Other future vectors */
.align 7
+ .globl __end_interrupts
+__end_interrupts:
+
+ .align 7
+system_call_entry_direct:
+#if defined(CONFIG_RELOCATABLE)
+ /* The first level prologue may have used LR to get here, saving
+ * orig in r10. To save hacking/ifdeffing common code, restore here.
+ */
+ mtlr r10
+#endif
system_call_entry:
b system_call_common
@@ -714,21 +907,21 @@ data_access_common:
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
+ b .do_hash_page /* Try to handle as hpte fault */
.align 7
- .globl h_data_storage_common
+ .globl h_data_storage_common
h_data_storage_common:
- mfspr r10,SPRN_HDAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_HDSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
- bl .save_nvgprs
+ mfspr r10,SPRN_HDAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_HDSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+ bl .save_nvgprs
DISABLE_INTS
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unknown_exception
+ b .ret_from_except
.align 7
.globl instruction_access_common
@@ -741,7 +934,7 @@ instruction_access_common:
li r5,0x400
b .do_hash_page /* Try to handle as hpte fault */
- STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
/*
* Here is the common SLB miss user that is used when going to virtual
@@ -1152,6 +1345,21 @@ _GLOBAL(do_stab_bolted)
rfid
b . /* prevent speculative execution */
+
+ /* Equivalents to the above handlers for relocation-on interrupt vectors */
+ STD_RELON_EXCEPTION_HV(., 0xe00, h_data_storage)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00)
+ STD_RELON_EXCEPTION_HV(., 0xe20, h_instr_storage)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20)
+ STD_RELON_EXCEPTION_HV(., 0xe40, emulation_assist)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40)
+ STD_RELON_EXCEPTION_HV(., 0xe60, hmi_exception)
+ KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60)
+
+ STD_RELON_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+ STD_RELON_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+ STD_RELON_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
+
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* Data area reserved for FWNMI option.
@@ -1164,7 +1372,7 @@ fwnmi_data_area:
/* pseries and powernv need to keep the whole page from
* 0x7000 to 0x8000 free for use by the firmware
*/
- . = 0x8000
+ . = 0x8000
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/* Space for CPU0's segment table */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 58bddee..116f086 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -422,7 +422,7 @@ _STATIC(__after_prom_start)
tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
#endif
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_RELOCATABLE
/*
* Check if the kernel has to be running as relocatable kernel based on the
* variable __run_at_load, if it is set the kernel is treated as relocatable
@@ -432,7 +432,8 @@ _STATIC(__after_prom_start)
cmplwi cr0,r7,1
bne 3f
- li r5,__end_interrupts - _stext /* just copy interrupts */
+ /* just copy interrupts */
+ LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
b 5f
3:
#endif
@@ -703,6 +704,7 @@ _INIT_STATIC(start_here_multiplatform)
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
/* Setup OPAL entry */
+ LOAD_REG_ADDR(r11, opal)
std r28,0(r11);
std r29,8(r11);
#endif
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 2099d9a..ea78761 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -55,9 +55,6 @@ __setup("powersave=off", powersave_off);
*/
void cpu_idle(void)
{
- if (ppc_md.idle_loop)
- ppc_md.idle_loop(); /* doesn't return */
-
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8226c6c..c862fd7 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -656,7 +656,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
struct iommu_pool *p;
/* number of bytes needed for the bitmap */
- sz = (tbl->it_size + 7) >> 3;
+ sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
if (!page)
@@ -708,7 +708,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
void iommu_free_table(struct iommu_table *tbl, const char *node_name)
{
- unsigned long bitmap_sz, i;
+ unsigned long bitmap_sz;
unsigned int order;
if (!tbl || !tbl->it_map) {
@@ -718,17 +718,11 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
}
/* verify that table contains no entries */
- /* it_size is in entries, and we're examining 64 at a time */
- for (i = 0; i < (tbl->it_size/64); i++) {
- if (tbl->it_map[i] != 0) {
- printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
- __func__, node_name);
- break;
- }
- }
+ if (!bitmap_empty(tbl->it_map, tbl->it_size))
+ pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name);
/* calculate bitmap size in bytes */
- bitmap_sz = (tbl->it_size + 7) / 8;
+ bitmap_sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
/* free bitmap */
order = get_order(bitmap_sz);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index fa9f6c7..e1ec57e 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -218,23 +218,23 @@ static void __init export_crashk_values(struct device_node *node)
* be sure what's in them, so remove them. */
prop = of_find_property(node, "linux,crashkernel-base", NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
prop = of_find_property(node, "linux,crashkernel-size", NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
if (crashk_res.start != 0) {
- prom_add_property(node, &crashk_base_prop);
+ of_add_property(node, &crashk_base_prop);
crashk_size = resource_size(&crashk_res);
- prom_add_property(node, &crashk_size_prop);
+ of_add_property(node, &crashk_size_prop);
}
/*
* memory_limit is required by the kexec-tools to limit the
* crash regions to the actual memory used.
*/
- prom_update_property(node, &memory_limit_prop);
+ of_update_property(node, &memory_limit_prop);
}
static int __init kexec_setup(void)
@@ -249,11 +249,11 @@ static int __init kexec_setup(void)
/* remove any stale properties so ours can be found */
prop = of_find_property(node, kernel_end_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
/* information needed by userspace when using default_machine_kexec */
kernel_end = __pa(_end);
- prom_add_property(node, &kernel_end_prop);
+ of_add_property(node, &kernel_end_prop);
export_crashk_values(node);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index d7f6090..7206701 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -389,14 +389,14 @@ static int __init export_htab_values(void)
/* remove any stale propertys so ours can be found */
prop = of_find_property(node, htab_base_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
prop = of_find_property(node, htab_size_prop.name, NULL);
if (prop)
- prom_remove_property(node, prop);
+ of_remove_property(node, prop);
htab_base = __pa(htab_address);
- prom_add_property(node, &htab_base_prop);
- prom_add_property(node, &htab_size_prop);
+ of_add_property(node, &htab_base_prop);
+ of_add_property(node, &htab_size_prop);
of_node_put(node);
return 0;
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 4b06ec5..64f526a 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -208,7 +208,7 @@ pci_create_OF_bus_map(void)
of_prop->name = "pci-OF-bus-map";
of_prop->length = 256;
of_prop->value = &of_prop[1];
- prom_add_property(dn, of_prop);
+ of_add_property(dn, of_prop);
of_node_put(dn);
}
}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 37725e8..8b6f7a9 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -32,6 +32,7 @@
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <linux/memblock.h>
+#include <linux/of.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -49,11 +50,11 @@
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
#include <asm/kexec.h>
#include <asm/opal.h>
#include <asm/fadump.h>
+#include <asm/debug.h>
#include <mm/mmu_decl.h>
@@ -802,7 +803,7 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
int err;
switch (action) {
- case PSERIES_RECONFIG_ADD:
+ case OF_RECONFIG_ATTACH_NODE:
err = of_finish_dynamic_node(node);
if (err < 0)
printk(KERN_ERR "finish_node returned %d\n", err);
@@ -821,7 +822,7 @@ static struct notifier_block prom_reconfig_nb = {
static int __init prom_reconfig_setup(void)
{
- return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
+ return of_reconfig_notifier_register(&prom_reconfig_nb);
}
__initcall(prom_reconfig_setup);
#endif
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cb6c123..779f340 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -671,6 +671,7 @@ static void __init early_cmdline_parse(void)
#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */
+#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */
/* Option vector 2: Open Firmware options supported */
#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
@@ -707,6 +708,7 @@ static void __init early_cmdline_parse(void)
#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */
#define OV5_PFO_HW_842 0x40 /* PFO Compression Accelerator */
#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS 0x01 /* 1,2,or 4 Sub-Processors supported */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
@@ -719,6 +721,8 @@ static unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
+ W(0xffff0000), W(0x004b0000), /* POWER8 */
+ W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
@@ -728,7 +732,7 @@ static unsigned char ibm_architecture_vec[] = {
3 - 2, /* length */
0, /* don't ignore, don't halt */
OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
- OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
+ OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
/* option vector 2: Open Firmware options supported */
34 - 2, /* length */
@@ -755,7 +759,7 @@ static unsigned char ibm_architecture_vec[] = {
OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */
/* option vector 5: PAPR/OF options */
- 18 - 2, /* length */
+ 19 - 2, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
@@ -769,13 +773,14 @@ static unsigned char ibm_architecture_vec[] = {
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
-#define IBM_ARCH_VEC_NRCORES_OFFSET 101
+#define IBM_ARCH_VEC_NRCORES_OFFSET 117
W(NR_CPUS), /* number of cores supported */
0,
0,
0,
0,
OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
+ OV5_SUB_PROCESSORS,
/* option vector 6: IBM PAPR hints */
4 - 2, /* length */
0,
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 79d8e56..c497000 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -952,6 +952,10 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
arch_bp_generic_fields(data &
(DABR_DATA_WRITE | DABR_DATA_READ),
&attr.bp_type);
+
+ /* Enable breakpoint */
+ attr.disabled = false;
+
ret = modify_user_hw_breakpoint(bp, &attr);
if (ret) {
ptrace_put_breakpoints(task);
@@ -1037,7 +1041,7 @@ void ptrace_disable(struct task_struct *child)
}
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-static long set_intruction_bp(struct task_struct *child,
+static long set_instruction_bp(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
int slot;
@@ -1338,6 +1342,12 @@ static int set_dac_range(struct task_struct *child,
static long ppc_set_hwdebug(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int len = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dabr;
#endif
@@ -1365,7 +1375,7 @@ static long ppc_set_hwdebug(struct task_struct *child,
if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
(bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
return -EINVAL;
- return set_intruction_bp(child, bp_info);
+ return set_instruction_bp(child, bp_info);
}
if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
return set_dac(child, bp_info);
@@ -1381,13 +1391,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
*/
if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
(bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
- bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
return -EINVAL;
- if (child->thread.dabr)
- return -ENOSPC;
-
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
@@ -1397,6 +1403,50 @@ static long ppc_set_hwdebug(struct task_struct *child,
dabr |= DABR_DATA_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
dabr |= DABR_DATA_WRITE;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
+ /*
+ * Check if the request is for 'range' breakpoints. We can
+ * support it if range < 8 bytes.
+ */
+ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
+ len = bp_info->addr2 - bp_info->addr;
+ } else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+ ptrace_put_breakpoints(child);
+ return -EINVAL;
+ }
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ ptrace_put_breakpoints(child);
+ return -ENOSPC;
+ }
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ attr.bp_len = len;
+ arch_bp_generic_fields(dabr & (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, NULL, child);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ ptrace_put_breakpoints(child);
+ return PTR_ERR(bp);
+ }
+
+ ptrace_put_breakpoints(child);
+ return 1;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+ if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
+ return -EINVAL;
+
+ if (child->thread.dabr)
+ return -ENOSPC;
child->thread.dabr = dabr;
child->thread.dabrx = DABRX_ALL;
@@ -1405,8 +1455,13 @@ static long ppc_set_hwdebug(struct task_struct *child,
#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
}
-static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
+static long ppc_del_hwdebug(struct task_struct *child, long data)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
int rc;
@@ -1426,10 +1481,25 @@ static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
#else
if (data != 1)
return -EINVAL;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ } else
+ ret = -ENOENT;
+ ptrace_put_breakpoints(child);
+ return ret;
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
if (child->thread.dabr == 0)
return -ENOENT;
child->thread.dabr = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
return 0;
#endif
@@ -1536,7 +1606,11 @@ long arch_ptrace(struct task_struct *child, long request,
dbginfo.data_bp_alignment = 4;
#endif
dbginfo.sizeof_condition = 0;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
+#else
dbginfo.features = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
if (!access_ok(VERIFY_WRITE, datavp,
@@ -1563,7 +1637,7 @@ long arch_ptrace(struct task_struct *child, long request,
}
case PPC_PTRACE_DELHWDEBUG: {
- ret = ppc_del_hwdebug(child, addr, data);
+ ret = ppc_del_hwdebug(child, data);
break;
}
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index fcec382..1fd6e7b 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -42,7 +42,6 @@
#include <asm/time.h>
#include <asm/mmu.h>
#include <asm/topology.h>
-#include <asm/pSeries_reconfig.h>
struct rtas_t rtas = {
.lock = __ARCH_SPIN_LOCK_UNLOCKED
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 20b0120..8329190 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -650,10 +650,8 @@ static int initialize_flash_pde_data(const char *rtas_call_name,
int token;
dp->data = kzalloc(buf_size, GFP_KERNEL);
- if (dp->data == NULL) {
- remove_flash_pde(dp);
+ if (dp->data == NULL)
return -ENOMEM;
- }
/*
* This code assumes that the status int is the first member of the
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index efb6a41..6da881b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -601,6 +601,11 @@ void __init setup_arch(char **cmdline_p)
kvm_linear_init();
+ /* Interrupt code needs to be 64K-aligned */
+ if ((unsigned long)_stext & 0xffff)
+ panic("Kernelbase not 64K-aligned (0x%lx)!\n",
+ (unsigned long)_stext);
+
ppc64_boot_msg(0x15, "Setup Done");
}
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index c39c1ca..f974849 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -122,29 +122,6 @@ int udbg_write(const char *s, int n)
return n - remain;
}
-int udbg_read(char *buf, int buflen)
-{
- char *p = buf;
- int i, c;
-
- if (!udbg_getc)
- return 0;
-
- for (i = 0; i < buflen; ++i) {
- do {
- c = udbg_getc();
- if (c == -1 && i == 0)
- return -1;
-
- } while (c == 0x11 || c == 0x13);
- if (c == 0 || c == -1)
- break;
- *p++ = c;
- }
-
- return i;
-}
-
#define UDBG_BUFSIZE 256
void udbg_printf(const char *fmt, ...)
{
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 59213cf..bba87ca 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -399,18 +399,6 @@ static unsigned long read_n_cells(int n, const unsigned int **buf)
return result;
}
-struct of_drconf_cell {
- u64 base_addr;
- u32 drc_index;
- u32 reserved;
- u32 aa_index;
- u32 flags;
-};
-
-#define DRCONF_MEM_ASSIGNED 0x00000008
-#define DRCONF_MEM_AI_INVALID 0x00000040
-#define DRCONF_MEM_RESERVED 0x00000080
-
/*
* Read the next memblock list entry from the ibm,dynamic-memory property
* and return the information in the provided of_drconf_cell structure.
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index fab919f..626ad08 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -191,12 +191,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
#ifdef CONFIG_PPC_47x
/*
- * 47x variant of icbt
- */
-# define ICBT(CT,RA,RB) \
- .long 0x7c00002c | ((CT) << 21) | ((RA) << 16) | ((RB) << 11)
-
-/*
* _tlbivax_bcast is only on 47x. We don't bother doing a runtime
* check though, it will blow up soon enough if we mistakenly try
* to use it on a 440.
@@ -208,8 +202,7 @@ _GLOBAL(_tlbivax_bcast)
wrteei 0
mtspr SPRN_MMUCR,r5
isync
-/* tlbivax 0,r3 - use .long to avoid binutils deps */
- .long 0x7c000624 | (r3 << 11)
+ PPC_TLBIVAX(0, R3)
isync
eieio
tlbsync
@@ -227,11 +220,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_476_DD2)
bl 2f
2: mflr r6
li r7,32
- ICBT(0,r6,r7) /* touch next cache line */
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
add r6,r6,r7
- ICBT(0,r6,r7) /* touch next cache line */
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
add r6,r6,r7
- ICBT(0,r6,r7) /* touch next cache line */
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
sync
nop
nop
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 441af08..2ee01e3 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -54,8 +54,10 @@
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
- * [ ><><><><><><>
- * NC P6P5P4P3P2P1
+ * < >< ><><><><><><>
+ * L2 NC P6P5P4P3P2P1
+ *
+ * L2 - 16-18 - Required L2SEL value (select field)
*
* NC - number of counters
* 15: NC error 0x8000
@@ -72,7 +74,7 @@
static int power7_get_constraint(u64 event, unsigned long *maskp,
unsigned long *valp)
{
- int pmc, sh;
+ int pmc, sh, unit;
unsigned long mask = 0, value = 0;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
@@ -90,6 +92,15 @@ static int power7_get_constraint(u64 event, unsigned long *maskp,
mask |= 0x8000;
value |= 0x1000;
}
+
+ unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+ if (unit == 6) {
+ /* L2SEL must be identical across events */
+ int l2sel = (event >> PM_L2SEL_SH) & PM_L2SEL_MSK;
+ mask |= 0x7 << 16;
+ value |= l2sel << 16;
+ }
+
*maskp = mask;
*valp = value;
return 0;
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b62508b..c169998 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,7 +2,6 @@ config PPC_MPC512x
bool "512x-based boards"
depends on 6xx
select FSL_SOC
- select FB_FSL_DIU
select IPIC
select PPC_CLOCK
select PPC_PCI_CHOICE
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index dcef6ad..0a134e0 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -42,7 +42,10 @@ static void __init mpc5121_ads_setup_arch(void)
for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
mpc83xx_add_bridge(np);
#endif
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
mpc512x_setup_diu();
+#endif
}
static void __init mpc5121_ads_init_IRQ(void)
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index 1ab6d11..c32b399 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -16,6 +16,13 @@ extern void __init mpc512x_init(void);
extern int __init mpc5121_clk_init(void);
void __init mpc512x_declare_of_platform_devices(void);
extern void mpc512x_restart(char *cmd);
-extern void mpc512x_init_diu(void);
-extern void mpc512x_setup_diu(void);
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+void mpc512x_init_diu(void);
+void mpc512x_setup_diu(void);
+#else
+#define mpc512x_init_diu NULL
+#define mpc512x_setup_diu NULL
+#endif
+
#endif /* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 1650e09..35f14fd 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -58,6 +58,8 @@ void mpc512x_restart(char *cmd)
;
}
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
struct fsl_diu_shared_fb {
u8 gamma[0x300]; /* 32-bit aligned! */
struct diu_ad ad0; /* 32-bit aligned! */
@@ -66,25 +68,6 @@ struct fsl_diu_shared_fb {
bool in_use;
};
-u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
- unsigned int bits_per_pixel)
-{
- switch (bits_per_pixel) {
- case 32:
- return 0x88883316;
- case 24:
- return 0x88082219;
- case 16:
- return 0x65053118;
- }
- return 0x00000400;
-}
-
-void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
- char *gamma_table_base)
-{
-}
-
void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
{
}
@@ -320,14 +303,14 @@ void __init mpc512x_setup_diu(void)
}
}
- diu_ops.get_pixel_format = mpc512x_get_pixel_format;
- diu_ops.set_gamma_table = mpc512x_set_gamma_table;
diu_ops.set_monitor_port = mpc512x_set_monitor_port;
diu_ops.set_pixel_clock = mpc512x_set_pixel_clock;
diu_ops.valid_monitor_port = mpc512x_valid_monitor_port;
diu_ops.release_bootmem = mpc512x_release_bootmem;
}
+#endif
+
void __init mpc512x_init_IRQ(void)
{
struct device_node *np;
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 448d862..1843bc9 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -4,7 +4,7 @@
* Written by: Grant Likely <grant.likely@secretlab.ca>
*
* Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Description:
* This program is free software; you can redistribute it and/or modify it
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index 9cf3602..792a301 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anonymous,a3m071",
"anonymous,a4m072",
"anon,charon",
"ifm,o2d",
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 2351f9e..16150fa 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -578,18 +578,4 @@ static struct platform_driver mpc52xx_lpbfifo_driver = {
.probe = mpc52xx_lpbfifo_probe,
.remove = __devexit_p(mpc52xx_lpbfifo_remove),
};
-
-/***********************************************************************
- * Module init/exit
- */
-static int __init mpc52xx_lpbfifo_init(void)
-{
- return platform_driver_register(&mpc52xx_lpbfifo_driver);
-}
-module_init(mpc52xx_lpbfifo_init);
-
-static void __exit mpc52xx_lpbfifo_exit(void)
-{
- platform_driver_unregister(&mpc52xx_lpbfifo_driver);
-}
-module_exit(mpc52xx_lpbfifo_exit);
+module_platform_driver(mpc52xx_lpbfifo_driver);
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 328d221..74861a7 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -16,7 +16,6 @@
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/types.h>
-#include <linux/bootmem.h>
#include <linux/slab.h>
#include <asm/io.h>
@@ -149,7 +148,7 @@ int __init pq2ads_pci_init_irq(void)
priv->regs = of_iomap(np, 0);
if (!priv->regs) {
printk(KERN_ERR "Cannot map PCI PIC registers.\n");
- goto out_free_bootmem;
+ goto out_free_kmalloc;
}
/* mask all PCI interrupts */
@@ -171,9 +170,8 @@ int __init pq2ads_pci_init_irq(void)
out_unmap_regs:
iounmap(priv->regs);
-out_free_bootmem:
- free_bootmem((unsigned long)priv,
- sizeof(struct pq2ads_pci_pic));
+out_free_kmalloc:
+ kfree(priv);
of_node_put(np);
out_unmap_irq:
irq_dispose_mapping(irq);
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index d440435..8d76220 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Description:
* MPC832xE MDS board specific routines.
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 1b1f6c8..1a26d2f 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index f8769d7..b63b42d 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -1,7 +1,7 @@
/*
* MPC8360E-RDK board file.
*
- * Copyright (c) 2006 Freescale Semicondutor, Inc.
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index eca1f09..9813c81 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -1,7 +1,7 @@
/*
* arch/powerpc/platforms/83xx/mpc837x_rdb.c
*
- * Copyright (C) 2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
*
* MPC837x RDB board specific routines
*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 8498f73..bd12588 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
+ * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 848a3e9..7328b8d 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -249,7 +249,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
goto exit;
}
- iprop = of_get_property(law_node, "fsl,num-laws", 0);
+ iprop = of_get_property(law_node, "fsl,num-laws", NULL);
if (!iprop) {
pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
goto exit;
@@ -539,7 +539,7 @@ static void __init p1022_ds_setup_arch(void)
};
/*
- * prom_update_property() is called before
+ * of_update_property() is called before
* kmalloc() is available, so the 'new' object
* should be allocated in the global area.
* The easiest way is to do that is to
@@ -548,7 +548,7 @@ static void __init p1022_ds_setup_arch(void)
*/
pr_info("p1022ds: disabling %s node",
np2->full_name);
- prom_update_property(np2, &nor_status);
+ of_update_property(np2, &nor_status);
of_node_put(np2);
}
@@ -564,7 +564,7 @@ static void __init p1022_ds_setup_arch(void)
pr_info("p1022ds: disabling %s node",
np2->full_name);
- prom_update_property(np2, &nand_status);
+ of_update_property(np2, &nand_status);
of_node_put(np2);
}
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6fcfa12..148c2f2 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -128,6 +128,19 @@ static void __cpuinit smp_85xx_mach_cpu_die(void)
}
#endif
+static inline void flush_spin_table(void *spin_table)
+{
+ flush_dcache_range((ulong)spin_table,
+ (ulong)spin_table + sizeof(struct epapr_spin_table));
+}
+
+static inline u32 read_spin_table_addr_l(void *spin_table)
+{
+ flush_dcache_range((ulong)spin_table,
+ (ulong)spin_table + sizeof(struct epapr_spin_table));
+ return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l);
+}
+
static int __cpuinit smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
@@ -161,8 +174,8 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
/* Map the spin table */
if (ioremappable)
- spin_table = ioremap(*cpu_rel_addr,
- sizeof(struct epapr_spin_table));
+ spin_table = ioremap_prot(*cpu_rel_addr,
+ sizeof(struct epapr_spin_table), _PAGE_COHERENT);
else
spin_table = phys_to_virt(*cpu_rel_addr);
@@ -173,7 +186,16 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
generic_set_cpu_up(nr);
if (system_state == SYSTEM_RUNNING) {
+ /*
+ * To keep it compatible with old boot program which uses
+ * cache-inhibit spin table, we need to flush the cache
+ * before accessing spin table to invalidate any staled data.
+ * We also need to flush the cache after writing to spin
+ * table to push data out.
+ */
+ flush_spin_table(spin_table);
out_be32(&spin_table->addr_l, 0);
+ flush_spin_table(spin_table);
/*
* We don't set the BPTR register here since it already points
@@ -181,9 +203,14 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
*/
mpic_reset_core(hw_cpu);
- /* wait until core is ready... */
- if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
- 10000, 100)) {
+ /*
+ * wait until core is ready...
+ * We need to invalidate the stale data, in case the boot
+ * loader uses a cache-inhibited spin table.
+ */
+ if (!spin_event_timeout(
+ read_spin_table_addr_l(spin_table) == 1,
+ 10000, 100)) {
pr_err("%s: timeout waiting for core %d to reset\n",
__func__, hw_cpu);
ret = -ENOENT;
@@ -194,12 +221,10 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
__secondary_hold_acknowledge = -1;
}
#endif
+ flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be32(&spin_table->addr_l, __pa(__early_start));
-
- if (!ioremappable)
- flush_dcache_range((ulong)spin_table,
- (ulong)spin_table + sizeof(struct epapr_spin_table));
+ flush_spin_table(spin_table);
/* Wait a bit for the CPU to ack. */
if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
@@ -213,13 +238,11 @@ out:
#else
smp_generic_kick_cpu(nr);
+ flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
__pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
-
- if (!ioremappable)
- flush_dcache_range((ulong)spin_table,
- (ulong)spin_table + sizeof(struct epapr_spin_table));
+ flush_spin_table(spin_table);
#endif
local_irq_restore(flags);
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index a817398..04d9d31 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -353,5 +353,7 @@ define_machine(mpc86xx_hpcd) {
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
+#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
};
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 6417119..311b804 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -55,6 +55,7 @@ static unsigned int low_freq;
static unsigned int hi_freq;
static unsigned int cur_freq;
static unsigned int sleep_freq;
+static unsigned long transition_latency;
/*
* Different models uses different mechanisms to switch the frequency
@@ -403,7 +404,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
if (policy->cpu != 0)
return -ENODEV;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cpuinfo.transition_latency = transition_latency;
policy->cur = cur_freq;
cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
@@ -658,12 +659,14 @@ static int __init pmac_cpufreq_setup(void)
if (!value)
goto out;
cur_freq = (*value) / 1000;
+ transition_latency = CPUFREQ_ETERNAL;
/* Check for 7447A based MacRISC3 */
if (of_machine_is_compatible("MacRISC3") &&
of_get_property(cpunode, "dynamic-power-step", NULL) &&
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
pmac_cpufreq_init_7447A(cpunode);
+ transition_latency = 8000000;
/* Check for other MacRISC3 machines */
} else if (of_machine_is_compatible("PowerBook3,4") ||
of_machine_is_compatible("PowerBook3,5") ||
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 471aa3c..53d052e 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -34,24 +34,12 @@
#include "powernv.h"
#include "pci.h"
-static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
- struct va_format *vaf)
-{
- char pfix[32];
-
- if (pe->pdev)
- strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
- else
- sprintf(pfix, "%04x:%02x ",
- pci_domain_nr(pe->pbus), pe->pbus->number);
- return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
-}
-
#define define_pe_printk_level(func, kern_level) \
static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
{ \
struct va_format vaf; \
va_list args; \
+ char pfix[32]; \
int r; \
\
va_start(args, fmt); \
@@ -59,7 +47,16 @@ static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
vaf.fmt = fmt; \
vaf.va = &args; \
\
- r = __pe_printk(kern_level, pe, &vaf); \
+ if (pe->pdev) \
+ strlcpy(pfix, dev_name(&pe->pdev->dev), \
+ sizeof(pfix)); \
+ else \
+ sprintf(pfix, "%04x:%02x ", \
+ pci_domain_nr(pe->pbus), \
+ pe->pbus->number); \
+ r = printk(kern_level "pci %s: [PE# %.3d] %pV", \
+ pfix, pe->pe_number, &vaf); \
+ \
va_end(args); \
\
return r; \
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 56d26bc..0978713 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -280,13 +280,13 @@ static void os_area_set_property(struct device_node *node,
if (tmp) {
pr_debug("%s:%d found %s\n", __func__, __LINE__, prop->name);
- prom_remove_property(node, tmp);
+ of_remove_property(node, tmp);
}
- result = prom_add_property(node, prop);
+ result = of_add_property(node, prop);
if (result)
- pr_debug("%s:%d prom_set_property failed\n", __func__,
+ pr_debug("%s:%d of_set_property failed\n", __func__,
__LINE__);
}
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 0f1b706..a1a7b9a 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -13,17 +13,16 @@
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/notifier.h>
-#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include "offline_states.h"
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
-#include <asm/pSeries_reconfig.h>
struct cc_workarea {
u32 drc_index;
@@ -255,9 +254,6 @@ static struct device_node *derive_parent(const char *path)
int dlpar_attach_node(struct device_node *dn)
{
-#ifdef CONFIG_PROC_DEVICETREE
- struct proc_dir_entry *ent;
-#endif
int rc;
of_node_set_flag(dn, OF_DYNAMIC);
@@ -266,44 +262,26 @@ int dlpar_attach_node(struct device_node *dn)
if (!dn->parent)
return -ENOMEM;
- rc = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, dn);
+ rc = of_attach_node(dn);
if (rc) {
printk(KERN_ERR "Failed to add device node %s\n",
dn->full_name);
return rc;
}
- of_attach_node(dn);
-
-#ifdef CONFIG_PROC_DEVICETREE
- ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
- if (ent)
- proc_device_tree_add_node(dn, ent);
-#endif
-
of_node_put(dn->parent);
return 0;
}
int dlpar_detach_node(struct device_node *dn)
{
-#ifdef CONFIG_PROC_DEVICETREE
- struct device_node *parent = dn->parent;
- struct property *prop = dn->properties;
-
- while (prop) {
- remove_proc_entry(prop->name, dn->pde);
- prop = prop->next;
- }
+ int rc;
- if (dn->pde)
- remove_proc_entry(dn->pde->name, parent->pde);
-#endif
+ rc = of_detach_node(dn);
+ if (rc)
+ return rc;
- pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, dn);
- of_detach_node(dn);
of_node_put(dn); /* Must decrement the refcount */
-
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 0b0eff0..7b56118 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -56,6 +56,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
{FW_FEATURE_MULTITCE, "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
{FW_FEATURE_VPHN, "hcall-vphn"},
+ {FW_FEATURE_SET_MODE, "hcall-set-mode"},
};
/* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 64c97d8..a389562 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -23,12 +23,12 @@
#include <linux/delay.h>
#include <linux/sched.h> /* for idle_task_exit */
#include <linux/cpu.h>
+#include <linux/of.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/vdso_datapage.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/xics.h>
#include "plpar_wrappers.h"
#include "offline_states.h"
@@ -333,10 +333,10 @@ static int pseries_smp_notifier(struct notifier_block *nb,
int err = 0;
switch (action) {
- case PSERIES_RECONFIG_ADD:
+ case OF_RECONFIG_ATTACH_NODE:
err = pseries_add_processor(node);
break;
- case PSERIES_RECONFIG_REMOVE:
+ case OF_RECONFIG_DETACH_NODE:
pseries_remove_processor(node);
break;
}
@@ -399,7 +399,7 @@ static int __init pseries_cpu_hotplug_init(void)
/* Processors can be added/removed only on LPAR */
if (firmware_has_feature(FW_FEATURE_LPAR)) {
- pSeries_reconfig_notifier_register(&pseries_smp_nb);
+ of_reconfig_notifier_register(&pseries_smp_nb);
cpu_maps_update_begin();
if (cede_offline_enabled && parse_cede_parameters() == 0) {
default_offline_state = CPU_STATE_INACTIVE;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index ecdb0a6..2372c60 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -16,7 +16,6 @@
#include <asm/firmware.h>
#include <asm/machdep.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/sparsemem.h>
static unsigned long get_memblock_size(void)
@@ -187,42 +186,69 @@ static int pseries_add_memory(struct device_node *np)
return (ret < 0) ? -EINVAL : 0;
}
-static int pseries_drconf_memory(unsigned long *base, unsigned int action)
+static int pseries_update_drconf_memory(struct of_prop_reconfig *pr)
{
+ struct of_drconf_cell *new_drmem, *old_drmem;
unsigned long memblock_size;
- int rc;
+ u32 entries;
+ u32 *p;
+ int i, rc = -EINVAL;
memblock_size = get_memblock_size();
if (!memblock_size)
return -EINVAL;
- if (action == PSERIES_DRCONF_MEM_ADD) {
- rc = memblock_add(*base, memblock_size);
- rc = (rc < 0) ? -EINVAL : 0;
- } else if (action == PSERIES_DRCONF_MEM_REMOVE) {
- rc = pseries_remove_memblock(*base, memblock_size);
- } else {
- rc = -EINVAL;
+ p = (u32 *)of_get_property(pr->dn, "ibm,dynamic-memory", NULL);
+ if (!p)
+ return -EINVAL;
+
+ /* The first int of the property is the number of lmb's described
+ * by the property. This is followed by an array of of_drconf_cell
+ * entries. Get the niumber of entries and skip to the array of
+ * of_drconf_cell's.
+ */
+ entries = *p++;
+ old_drmem = (struct of_drconf_cell *)p;
+
+ p = (u32 *)pr->prop->value;
+ p++;
+ new_drmem = (struct of_drconf_cell *)p;
+
+ for (i = 0; i < entries; i++) {
+ if ((old_drmem[i].flags & DRCONF_MEM_ASSIGNED) &&
+ (!(new_drmem[i].flags & DRCONF_MEM_ASSIGNED))) {
+ rc = pseries_remove_memblock(old_drmem[i].base_addr,
+ memblock_size);
+ break;
+ } else if ((!(old_drmem[i].flags & DRCONF_MEM_ASSIGNED)) &&
+ (new_drmem[i].flags & DRCONF_MEM_ASSIGNED)) {
+ rc = memblock_add(old_drmem[i].base_addr,
+ memblock_size);
+ rc = (rc < 0) ? -EINVAL : 0;
+ break;
+ }
}
return rc;
}
static int pseries_memory_notifier(struct notifier_block *nb,
- unsigned long action, void *node)
+ unsigned long action, void *node)
{
+ struct of_prop_reconfig *pr;
int err = 0;
switch (action) {
- case PSERIES_RECONFIG_ADD:
+ case OF_RECONFIG_ATTACH_NODE:
err = pseries_add_memory(node);
break;
- case PSERIES_RECONFIG_REMOVE:
+ case OF_RECONFIG_DETACH_NODE:
err = pseries_remove_memory(node);
break;
- case PSERIES_DRCONF_MEM_ADD:
- case PSERIES_DRCONF_MEM_REMOVE:
- err = pseries_drconf_memory(node, action);
+ case OF_RECONFIG_UPDATE_PROPERTY:
+ pr = (struct of_prop_reconfig *)node;
+ if (!strcmp(pr->prop->name, "ibm,dynamic-memory"))
+ err = pseries_update_drconf_memory(pr);
break;
}
return notifier_from_errno(err);
@@ -235,7 +261,7 @@ static struct notifier_block pseries_mem_nb = {
static int __init pseries_memory_hotplug_init(void)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
- pSeries_reconfig_notifier_register(&pseries_mem_nb);
+ of_reconfig_notifier_register(&pseries_mem_nb);
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 6153eea..e2685ba 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -36,13 +36,13 @@
#include <linux/dma-mapping.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
+#include <linux/of.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
@@ -760,7 +760,7 @@ static void remove_ddw(struct device_node *np)
__remove_ddw(np, ddw_avail, liobn);
delprop:
- ret = prom_remove_property(np, win64);
+ ret = of_remove_property(np, win64);
if (ret)
pr_warning("%s: failed to remove direct window property: %d\n",
np->full_name, ret);
@@ -1070,7 +1070,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
goto out_free_window;
}
- ret = prom_add_property(pdn, win64);
+ ret = of_add_property(pdn, win64);
if (ret) {
dev_err(&dev->dev, "unable to add dma window property for %s: %d",
pdn->full_name, ret);
@@ -1294,7 +1294,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
struct direct_window *window;
switch (action) {
- case PSERIES_RECONFIG_REMOVE:
+ case OF_RECONFIG_DETACH_NODE:
if (pci && pci->iommu_table)
iommu_free_table(pci->iommu_table, np->full_name);
@@ -1357,7 +1357,7 @@ void iommu_init_early_pSeries(void)
}
- pSeries_reconfig_notifier_register(&iommu_reconfig_nb);
+ of_reconfig_notifier_register(&iommu_reconfig_nb);
register_memory_notifier(&iommu_mem_nb);
set_pci_dma_ops(&dma_iommu_ops);
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index dd30b12..6573808 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -116,7 +116,7 @@ static int update_dt_property(struct device_node *dn, struct property **prop,
}
if (!more) {
- prom_update_property(dn, new_prop);
+ of_update_property(dn, new_prop);
new_prop = NULL;
}
@@ -172,7 +172,7 @@ static int update_dt_node(u32 phandle)
case 0x80000000:
prop = of_find_property(dn, prop_name, NULL);
- prom_remove_property(dn, prop);
+ of_remove_property(dn, prop);
prop = NULL;
break;
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 13e8cc4..e6cc34a 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -273,4 +273,35 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
lbuf[1]);
}
+/* Set various resource mode parameters */
+static inline long plpar_set_mode(unsigned long mflags, unsigned long resource,
+ unsigned long value1, unsigned long value2)
+{
+ return plpar_hcall_norets(H_SET_MODE, mflags, resource, value1, value2);
+}
+
+/*
+ * Enable relocation on exceptions on this partition
+ *
+ * Note: this call has a partition wide scope and can take a while to complete.
+ * If it returns H_LONG_BUSY_* it should be retried periodically until it
+ * returns H_SUCCESS.
+ */
+static inline long enable_reloc_on_exceptions(void)
+{
+ /* mflags = 3: Exceptions at 0xC000000000004000 */
+ return plpar_set_mode(3, 3, 0, 0);
+}
+
+/*
+ * Disable relocation on exceptions on this partition
+ *
+ * Note: this call has a partition wide scope and can take a while to complete.
+ * If it returns H_LONG_BUSY_* it should be retried periodically until it
+ * returns H_SUCCESS.
+ */
+static inline long disable_reloc_on_exceptions(void) {
+ return plpar_set_mode(0, 3, 0, 0);
+}
+
#endif /* _PSERIES_PLPAR_WRAPPERS_H */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2f46681..d6491bd 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -16,55 +16,13 @@
#include <linux/notifier.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/mmu.h>
-
-
-/*
- * Routines for "runtime" addition and removal of device tree nodes.
- */
-#ifdef CONFIG_PROC_DEVICETREE
-/*
- * Add a node to /proc/device-tree.
- */
-static void add_node_proc_entries(struct device_node *np)
-{
- struct proc_dir_entry *ent;
-
- ent = proc_mkdir(strrchr(np->full_name, '/') + 1, np->parent->pde);
- if (ent)
- proc_device_tree_add_node(np, ent);
-}
-
-static void remove_node_proc_entries(struct device_node *np)
-{
- struct property *pp = np->properties;
- struct device_node *parent = np->parent;
-
- while (pp) {
- remove_proc_entry(pp->name, np->pde);
- pp = pp->next;
- }
- if (np->pde)
- remove_proc_entry(np->pde->name, parent->pde);
-}
-#else /* !CONFIG_PROC_DEVICETREE */
-static void add_node_proc_entries(struct device_node *np)
-{
- return;
-}
-
-static void remove_node_proc_entries(struct device_node *np)
-{
- return;
-}
-#endif /* CONFIG_PROC_DEVICETREE */
-
/**
* derive_parent - basically like dirname(1)
* @path: the full_name of a node to be added to the tree
@@ -97,28 +55,6 @@ static struct device_node *derive_parent(const char *path)
return parent;
}
-static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
-
-int pSeries_reconfig_notifier_register(struct notifier_block *nb)
-{
- return blocking_notifier_chain_register(&pSeries_reconfig_chain, nb);
-}
-EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_register);
-
-void pSeries_reconfig_notifier_unregister(struct notifier_block *nb)
-{
- blocking_notifier_chain_unregister(&pSeries_reconfig_chain, nb);
-}
-EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_unregister);
-
-int pSeries_reconfig_notify(unsigned long action, void *p)
-{
- int err = blocking_notifier_call_chain(&pSeries_reconfig_chain,
- action, p);
-
- return notifier_to_errno(err);
-}
-
static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
{
struct device_node *np;
@@ -142,16 +78,12 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
goto out_err;
}
- err = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, np);
+ err = of_attach_node(np);
if (err) {
printk(KERN_ERR "Failed to add device node %s\n", path);
goto out_err;
}
- of_attach_node(np);
-
- add_node_proc_entries(np);
-
of_node_put(np->parent);
return 0;
@@ -179,11 +111,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
return -EBUSY;
}
- remove_node_proc_entries(np);
-
- pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, np);
of_detach_node(np);
-
of_node_put(parent);
of_node_put(np); /* Must decrement the refcount */
return 0;
@@ -397,7 +325,7 @@ static int do_add_property(char *buf, size_t bufsize)
if (!prop)
return -ENOMEM;
- prom_add_property(np, prop);
+ of_add_property(np, prop);
return 0;
}
@@ -421,16 +349,15 @@ static int do_remove_property(char *buf, size_t bufsize)
prop = of_find_property(np, buf, NULL);
- return prom_remove_property(np, prop);
+ return of_remove_property(np, prop);
}
static int do_update_property(char *buf, size_t bufsize)
{
struct device_node *np;
- struct pSeries_reconfig_prop_update upd_value;
unsigned char *value;
char *name, *end, *next_prop;
- int rc, length;
+ int length;
struct property *newprop;
buf = parse_node(buf, bufsize, &np);
end = buf + bufsize;
@@ -452,41 +379,7 @@ static int do_update_property(char *buf, size_t bufsize)
if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
slb_set_size(*(int *)value);
- upd_value.node = np;
- upd_value.property = newprop;
- pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value);
-
- rc = prom_update_property(np, newprop);
- if (rc)
- return rc;
-
- /* For memory under the ibm,dynamic-reconfiguration-memory node
- * of the device tree, adding and removing memory is just an update
- * to the ibm,dynamic-memory property instead of adding/removing a
- * memory node in the device tree. For these cases we still need to
- * involve the notifier chain.
- */
- if (!strcmp(name, "ibm,dynamic-memory")) {
- int action;
-
- next_prop = parse_next_property(next_prop, end, &name,
- &length, &value);
- if (!next_prop)
- return -EINVAL;
-
- if (!strcmp(name, "add"))
- action = PSERIES_DRCONF_MEM_ADD;
- else
- action = PSERIES_DRCONF_MEM_REMOVE;
-
- rc = pSeries_reconfig_notify(action, value);
- if (rc) {
- prom_update_property(np, newprop);
- return rc;
- }
- }
-
- return 0;
+ return of_update_property(np, newprop);
}
/**
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e3cb7ae..ca55882 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -40,6 +40,8 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpuidle.h>
+#include <linux/of.h>
+#include <linux/kexec.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -63,7 +65,6 @@
#include <asm/smp.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
-#include <asm/pSeries_reconfig.h>
#include "plpar_wrappers.h"
#include "pseries.h"
@@ -258,7 +259,7 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
int err = NOTIFY_OK;
switch (action) {
- case PSERIES_RECONFIG_ADD:
+ case OF_RECONFIG_ATTACH_NODE:
pci = np->parent->data;
if (pci) {
update_dn_pci_info(np, pci->phb);
@@ -367,6 +368,65 @@ static void pSeries_idle(void)
}
}
+/*
+ * Enable relocation on during exceptions. This has partition wide scope and
+ * may take a while to complete, if it takes longer than one second we will
+ * just give up rather than wasting any more time on this - if that turns out
+ * to ever be a problem in practice we can move this into a kernel thread to
+ * finish off the process later in boot.
+ */
+static int __init pSeries_enable_reloc_on_exc(void)
+{
+ long rc;
+ unsigned int delay, total_delay = 0;
+
+ while (1) {
+ rc = enable_reloc_on_exceptions();
+ if (!H_IS_LONG_BUSY(rc))
+ return rc;
+
+ delay = get_longbusy_msecs(rc);
+ total_delay += delay;
+ if (total_delay > 1000) {
+ pr_warn("Warning: Giving up waiting to enable "
+ "relocation on exceptions (%u msec)!\n",
+ total_delay);
+ return rc;
+ }
+
+ mdelay(delay);
+ }
+}
+
+#ifdef CONFIG_KEXEC
+static long pSeries_disable_reloc_on_exc(void)
+{
+ long rc;
+
+ while (1) {
+ rc = disable_reloc_on_exceptions();
+ if (!H_IS_LONG_BUSY(rc))
+ return rc;
+ mdelay(get_longbusy_msecs(rc));
+ }
+}
+
+static void pSeries_machine_kexec(struct kimage *image)
+{
+ long rc;
+
+ if (firmware_has_feature(FW_FEATURE_SET_MODE) &&
+ (image->type != KEXEC_TYPE_CRASH)) {
+ rc = pSeries_disable_reloc_on_exc();
+ if (rc != H_SUCCESS)
+ pr_warning("Warning: Failed to disable relocation on "
+ "exceptions: %ld\n", rc);
+ }
+
+ default_machine_kexec(image);
+}
+#endif
+
static void __init pSeries_setup_arch(void)
{
panic_timeout = 10;
@@ -389,7 +449,7 @@ static void __init pSeries_setup_arch(void)
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
- pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
+ of_reconfig_notifier_register(&pci_dn_reconfig_nb);
pSeries_nvram_init();
@@ -402,6 +462,14 @@ static void __init pSeries_setup_arch(void)
ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
else
ppc_md.enable_pmcs = power4_enable_pmcs;
+
+ if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ long rc;
+ if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) {
+ pr_warn("Unable to enable relocation on exceptions: "
+ "%ld\n", rc);
+ }
+ }
}
static int __init pSeries_init_panel(void)
@@ -659,4 +727,7 @@ define_machine(pseries) {
.progress = rtas_progress,
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = pSeries_machine_kexec,
+#endif
};
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 71706bc..9fc0a494 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -38,7 +38,6 @@
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/rtas.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 02cf1e7..0eb871c 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -1,7 +1,7 @@
/*
* Freescale General-purpose Timers Module
*
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright (c) Freescale Semiconductor, Inc. 2006.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 01b62a6..5ba325b 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -89,7 +89,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
return 0;
}
-static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+static int setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
{
@@ -126,7 +126,7 @@ static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
}
/* atmu setup for fsl pci/pcie controller */
-static void __init setup_pci_atmu(struct pci_controller *hose,
+static void setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
@@ -902,9 +902,42 @@ static int __devinit fsl_pci_probe(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int fsl_pci_resume(struct device *dev)
+{
+ struct pci_controller *hose;
+ struct resource pci_rsrc;
+
+ hose = pci_find_hose_for_OF_device(dev->of_node);
+ if (!hose)
+ return -ENODEV;
+
+ if (of_address_to_resource(dev->of_node, 0, &pci_rsrc)) {
+ dev_err(dev, "Get pci register base failed.");
+ return -ENODEV;
+ }
+
+ setup_pci_atmu(hose, &pci_rsrc);
+
+ return 0;
+}
+
+static const struct dev_pm_ops pci_pm_ops = {
+ .resume = fsl_pci_resume,
+};
+
+#define PCI_PM_OPS (&pci_pm_ops)
+
+#else
+
+#define PCI_PM_OPS NULL
+
+#endif
+
static struct platform_driver fsl_pci_driver = {
.driver = {
.name = "fsl-pci",
+ .pm = PCI_PM_OPS,
.of_match_table = pci_ids,
},
.probe = fsl_pci_probe,
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index 8f04654..5aaf86c 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -214,18 +214,7 @@ static struct platform_driver pmi_of_platform_driver = {
.of_match_table = pmi_match,
},
};
-
-static int __init pmi_module_init(void)
-{
- return platform_driver_register(&pmi_of_platform_driver);
-}
-module_init(pmi_module_init);
-
-static void __exit pmi_module_exit(void)
-{
- platform_driver_unregister(&pmi_of_platform_driver);
-}
-module_exit(pmi_module_exit);
+module_platform_driver(pmi_of_platform_driver);
int pmi_send_message(pmi_message_t msg)
{
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b043675..238a07b 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2010 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 2fba6ef2..b2b87c30 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -1,7 +1,7 @@
/*
* arch/powerpc/sysdev/qe_lib/qe_ic.c
*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
index c327872..efef7ab 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.h
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h
@@ -3,7 +3,7 @@
*
* QUICC ENGINE Interrupt Controller Header
*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index fd1a6c3..a88807b 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -3,7 +3,7 @@
*
* QE Parallel I/O ports configuration routines
*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index 0467750..134b07d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -3,7 +3,7 @@
*
* QE UCC API Set - UCC specific routines implementations.
*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index fba0244..cceb2e3 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 524c0ea..1c062f4 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
index 9162828..27f23bd 100644
--- a/arch/powerpc/sysdev/qe_lib/usb.c
+++ b/arch/powerpc/sysdev/qe_lib/usb.c
@@ -1,7 +1,7 @@
/*
* QE USB routines
*
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright 2006 Freescale Semiconductor, Inc.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index c168c54e..b49fdbd 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -6,7 +6,7 @@ GCOV_PROFILE := n
ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
-obj-y += xmon.o start.o nonstdio.o
+obj-y += xmon.o nonstdio.o
ifdef CONFIG_XMON_DISASSEMBLY
obj-y += ppc-dis.o ppc-opc.o
diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c
index bfac84f..bce3dcf 100644
--- a/arch/powerpc/xmon/nonstdio.c
+++ b/arch/powerpc/xmon/nonstdio.c
@@ -7,9 +7,23 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/string.h>
+#include <asm/udbg.h>
#include <asm/time.h>
#include "nonstdio.h"
+
+static int xmon_write(const void *ptr, int nb)
+{
+ return udbg_write(ptr, nb);
+}
+
+static int xmon_readchar(void)
+{
+ if (udbg_getc)
+ return udbg_getc();
+ return -1;
+}
+
int xmon_putchar(int c)
{
char ch = c;
@@ -23,34 +37,7 @@ static char line[256];
static char *lineptr;
static int lineleft;
-int xmon_expect(const char *str, unsigned long timeout)
-{
- int c;
- unsigned long t0;
-
- /* assume 25MHz default timebase if tb_ticks_per_sec not set yet */
- timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000;
- t0 = get_tbl();
- do {
- lineptr = line;
- for (;;) {
- c = xmon_read_poll();
- if (c == -1) {
- if (get_tbl() - t0 > timeout)
- return 0;
- continue;
- }
- if (c == '\n')
- break;
- if (c != '\r' && lineptr < &line[sizeof(line) - 1])
- *lineptr++ = c;
- }
- *lineptr = 0;
- } while (strstr(line, str) == NULL);
- return 1;
-}
-
-int xmon_getchar(void)
+static int xmon_getchar(void)
{
int c;
@@ -124,13 +111,19 @@ char *xmon_gets(char *str, int nb)
void xmon_printf(const char *format, ...)
{
va_list args;
- int n;
static char xmon_outbuf[1024];
+ int rc, n;
va_start(args, format);
n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args);
va_end(args);
- xmon_write(xmon_outbuf, n);
+
+ rc = xmon_write(xmon_outbuf, n);
+
+ if (n && rc == 0) {
+ /* No udbg hooks, fallback to printk() - dangerous */
+ printk(xmon_outbuf);
+ }
}
void xmon_puts(const char *str)
diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h
index 23dd95f..18a51de 100644
--- a/arch/powerpc/xmon/nonstdio.h
+++ b/arch/powerpc/xmon/nonstdio.h
@@ -4,12 +4,6 @@
#define putchar xmon_putchar
extern int xmon_putchar(int c);
-extern int xmon_getchar(void);
extern void xmon_puts(const char *);
extern char *xmon_gets(char *, int);
extern void xmon_printf(const char *, ...);
-extern void xmon_map_scc(void);
-extern int xmon_expect(const char *str, unsigned long timeout);
-extern int xmon_write(const void *ptr, int nb);
-extern int xmon_readchar(void);
-extern int xmon_read_poll(void);
diff --git a/arch/powerpc/xmon/start.c b/arch/powerpc/xmon/start.c
deleted file mode 100644
index 8864de2..0000000
--- a/arch/powerpc/xmon/start.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include "nonstdio.h"
-
-void xmon_map_scc(void)
-{
-}
-
-int xmon_write(const void *ptr, int nb)
-{
- return udbg_write(ptr, nb);
-}
-
-int xmon_readchar(void)
-{
- if (udbg_getc)
- return udbg_getc();
- return -1;
-}
-
-int xmon_read_poll(void)
-{
- if (udbg_getc_poll)
- return udbg_getc_poll();
- return -1;
-}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 3a56a63..1f8d2f1 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -52,9 +52,6 @@
#include "nonstdio.h"
#include "dis-asm.h"
-#define scanhex xmon_scanhex
-#define skipbl xmon_skipbl
-
#ifdef CONFIG_SMP
static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
static unsigned long xmon_taken = 1;
@@ -169,12 +166,8 @@ extern void xmon_leave(void);
#ifdef CONFIG_PPC64
#define REG "%.16lx"
-#define REGS_PER_LINE 4
-#define LAST_VOLATILE 13
#else
#define REG "%.8lx"
-#define REGS_PER_LINE 8
-#define LAST_VOLATILE 12
#endif
#define GETWORD(v) (((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
@@ -1288,27 +1281,19 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp,
catch_memory_errors = 0;
}
-static int xmon_depth_to_print = 64;
-
#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long))
#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long))
-#ifdef __powerpc64__
-#define REGS_OFFSET 0x70
-#else
-#define REGS_OFFSET 16
-#endif
-
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc)
{
+ int max_to_print = 64;
unsigned long ip;
unsigned long newsp;
unsigned long marker;
- int count = 0;
struct pt_regs regs;
- do {
+ while (max_to_print--) {
if (sp < PAGE_OFFSET) {
if (sp != 0)
printf("SP (%lx) is in userspace\n", sp);
@@ -1362,10 +1347,10 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
an exception frame. */
if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
&& marker == STACK_FRAME_REGS_MARKER) {
- if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
+ if (mread(sp + STACK_FRAME_OVERHEAD, &regs, sizeof(regs))
!= sizeof(regs)) {
printf("Couldn't read registers at %lx\n",
- sp + REGS_OFFSET);
+ sp + STACK_FRAME_OVERHEAD);
break;
}
printf("--- Exception: %lx %s at ", regs.trap,
@@ -1379,7 +1364,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
break;
sp = newsp;
- } while (count++ < xmon_depth_to_print);
+ }
}
static void backtrace(struct pt_regs *excp)
@@ -2943,7 +2928,6 @@ static void xmon_init(int enable)
__debugger_dabr_match = NULL;
__debugger_fault_handler = NULL;
}
- xmon_map_scc();
}
#ifdef CONFIG_MAGIC_SYSRQ
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
index 0ce6257..6c4c000 100644
--- a/drivers/crypto/nx/nx-842.c
+++ b/drivers/crypto/nx/nx-842.c
@@ -28,7 +28,6 @@
#include <linux/slab.h>
#include <asm/page.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/vio.h>
#include "nx_csbcpb.h" /* struct nx_csbcpb */
@@ -1014,26 +1013,23 @@ error_out:
* NOTIFY_BAD encoded with error number on failure, use
* notifier_to_errno() to decode this value
*/
-static int nx842_OF_notifier(struct notifier_block *np,
- unsigned long action,
- void *update)
+static int nx842_OF_notifier(struct notifier_block *np, unsigned long action,
+ void *update)
{
- struct pSeries_reconfig_prop_update *upd;
+ struct of_prop_reconfig *upd = update;
struct nx842_devdata *local_devdata;
struct device_node *node = NULL;
- upd = (struct pSeries_reconfig_prop_update *)update;
-
rcu_read_lock();
local_devdata = rcu_dereference(devdata);
if (local_devdata)
node = local_devdata->dev->of_node;
if (local_devdata &&
- action == PSERIES_UPDATE_PROPERTY &&
- !strcmp(upd->node->name, node->name)) {
+ action == OF_RECONFIG_UPDATE_PROPERTY &&
+ !strcmp(upd->dn->name, node->name)) {
rcu_read_unlock();
- nx842_OF_upd(upd->property);
+ nx842_OF_upd(upd->prop);
} else
rcu_read_unlock();
@@ -1182,7 +1178,7 @@ static int __init nx842_probe(struct vio_dev *viodev,
synchronize_rcu();
kfree(old_devdata);
- pSeries_reconfig_notifier_register(&nx842_of_nb);
+ of_reconfig_notifier_register(&nx842_of_nb);
ret = nx842_OF_upd(NULL);
if (ret && ret != -ENODEV) {
@@ -1228,7 +1224,7 @@ static int __exit nx842_remove(struct vio_dev *viodev)
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
- pSeries_reconfig_notifier_unregister(&nx842_of_nb);
+ of_reconfig_notifier_unregister(&nx842_of_nb);
rcu_assign_pointer(devdata, NULL);
spin_unlock_irqrestore(&devdata_mutex, flags);
synchronize_rcu();
diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c
index 638110e..f7a8a16 100644
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -33,7 +33,6 @@
#include <linux/scatterlist.h>
#include <linux/device.h>
#include <linux/of.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/hvcall.h>
#include <asm/vio.h>
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index 2d41d04..89517ff 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -90,26 +90,6 @@
static DEFINE_SPINLOCK(hcall_lock);
-static u32 get_longbusy_msecs(int longbusy_rc)
-{
- switch (longbusy_rc) {
- case H_LONG_BUSY_ORDER_1_MSEC:
- return 1;
- case H_LONG_BUSY_ORDER_10_MSEC:
- return 10;
- case H_LONG_BUSY_ORDER_100_MSEC:
- return 100;
- case H_LONG_BUSY_ORDER_1_SEC:
- return 1000;
- case H_LONG_BUSY_ORDER_10_SEC:
- return 10000;
- case H_LONG_BUSY_ORDER_100_SEC:
- return 100000;
- default:
- return 1;
- }
-}
-
static long ehca_plpar_hcall_norets(unsigned long opcode,
unsigned long arg1,
unsigned long arg2,
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 1963680..9c6b964 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -997,7 +997,7 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
"%02x !\n", id, hdr->id);
goto failure;
}
- if (prom_add_property(smu->of_node, prop)) {
+ if (of_add_property(smu->of_node, prop)) {
printk(KERN_DEBUG "SMU: Failed creating sdb-partition-%02x "
"property !\n", id);
goto failure;
diff --git a/drivers/macintosh/windfarm_fcu_controls.c b/drivers/macintosh/windfarm_fcu_controls.c
index b3411ed..fd6ed15 100644
--- a/drivers/macintosh/windfarm_fcu_controls.c
+++ b/drivers/macintosh/windfarm_fcu_controls.c
@@ -593,19 +593,7 @@ static struct i2c_driver wf_fcu_driver = {
.id_table = wf_fcu_id,
};
-static int __init wf_fcu_init(void)
-{
- return i2c_add_driver(&wf_fcu_driver);
-}
-
-static void __exit wf_fcu_exit(void)
-{
- i2c_del_driver(&wf_fcu_driver);
-}
-
-
-module_init(wf_fcu_init);
-module_exit(wf_fcu_exit);
+module_i2c_driver(wf_fcu_driver);
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("FCU control objects for PowerMacs thermal control");
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index b0c2d36..9ef32b3 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -174,19 +174,7 @@ static struct i2c_driver wf_lm75_driver = {
.id_table = wf_lm75_id,
};
-static int __init wf_lm75_sensor_init(void)
-{
- return i2c_add_driver(&wf_lm75_driver);
-}
-
-static void __exit wf_lm75_sensor_exit(void)
-{
- i2c_del_driver(&wf_lm75_driver);
-}
-
-
-module_init(wf_lm75_sensor_init);
-module_exit(wf_lm75_sensor_exit);
+module_i2c_driver(wf_lm75_driver);
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index 371b058..945a25b 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -130,18 +130,7 @@ static struct i2c_driver wf_max6690_driver = {
.id_table = wf_max6690_id,
};
-static int __init wf_max6690_sensor_init(void)
-{
- return i2c_add_driver(&wf_max6690_driver);
-}
-
-static void __exit wf_max6690_sensor_exit(void)
-{
- i2c_del_driver(&wf_max6690_driver);
-}
-
-module_init(wf_max6690_sensor_init);
-module_exit(wf_max6690_sensor_exit);
+module_i2c_driver(wf_max6690_driver);
MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
MODULE_DESCRIPTION("MAX6690 sensor objects for PowerMac thermal control");
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 426e810..d87f5ee 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -364,18 +364,7 @@ static struct i2c_driver wf_sat_driver = {
.id_table = wf_sat_id,
};
-static int __init sat_sensors_init(void)
-{
- return i2c_add_driver(&wf_sat_driver);
-}
-
-static void __exit sat_sensors_exit(void)
-{
- i2c_del_driver(&wf_sat_driver);
-}
-
-module_init(sat_sensors_init);
-module_exit(sat_sensors_exit);
+module_i2c_driver(wf_sat_driver);
MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
MODULE_DESCRIPTION("SMU satellite sensors for PowerMac thermal control");
diff --git a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
index 8364815..99b6c2a 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
@@ -39,26 +39,6 @@
* hcp_* - structures, variables and functions releated to Hypervisor Calls
*/
-static inline u32 get_longbusy_msecs(int long_busy_ret_code)
-{
- switch (long_busy_ret_code) {
- case H_LONG_BUSY_ORDER_1_MSEC:
- return 1;
- case H_LONG_BUSY_ORDER_10_MSEC:
- return 10;
- case H_LONG_BUSY_ORDER_100_MSEC:
- return 100;
- case H_LONG_BUSY_ORDER_1_SEC:
- return 1000;
- case H_LONG_BUSY_ORDER_10_SEC:
- return 10000;
- case H_LONG_BUSY_ORDER_100_SEC:
- return 100000;
- default:
- return 1;
- }
-}
-
/* Number of pages which can be registered at once by H_REGISTER_HEA_RPAGES */
#define EHEA_MAX_RPAGE 512
diff --git a/drivers/of/base.c b/drivers/of/base.c
index be84640..db8d211 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1114,13 +1114,36 @@ int of_parse_phandle_with_args(const struct device_node *np, const char *list_na
}
EXPORT_SYMBOL(of_parse_phandle_with_args);
+#if defined(CONFIG_OF_DYNAMIC)
+static int of_property_notify(int action, struct device_node *np,
+ struct property *prop)
+{
+ struct of_prop_reconfig pr;
+
+ pr.dn = np;
+ pr.prop = prop;
+ return of_reconfig_notify(action, &pr);
+}
+#else
+static int of_property_notify(int action, struct device_node *np,
+ struct property *prop)
+{
+ return 0;
+}
+#endif
+
/**
- * prom_add_property - Add a property to a node
+ * of_add_property - Add a property to a node
*/
-int prom_add_property(struct device_node *np, struct property *prop)
+int of_add_property(struct device_node *np, struct property *prop)
{
struct property **next;
unsigned long flags;
+ int rc;
+
+ rc = of_property_notify(OF_RECONFIG_ADD_PROPERTY, np, prop);
+ if (rc)
+ return rc;
prop->next = NULL;
write_lock_irqsave(&devtree_lock, flags);
@@ -1146,18 +1169,23 @@ int prom_add_property(struct device_node *np, struct property *prop)
}
/**
- * prom_remove_property - Remove a property from a node.
+ * of_remove_property - Remove a property from a node.
*
* Note that we don't actually remove it, since we have given out
* who-knows-how-many pointers to the data using get-property.
* Instead we just move the property to the "dead properties"
* list, so it won't be found any more.
*/
-int prom_remove_property(struct device_node *np, struct property *prop)
+int of_remove_property(struct device_node *np, struct property *prop)
{
struct property **next;
unsigned long flags;
int found = 0;
+ int rc;
+
+ rc = of_property_notify(OF_RECONFIG_REMOVE_PROPERTY, np, prop);
+ if (rc)
+ return rc;
write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
@@ -1187,7 +1215,7 @@ int prom_remove_property(struct device_node *np, struct property *prop)
}
/*
- * prom_update_property - Update a property in a node, if the property does
+ * of_update_property - Update a property in a node, if the property does
* not exist, add it.
*
* Note that we don't actually remove it, since we have given out
@@ -1195,19 +1223,22 @@ int prom_remove_property(struct device_node *np, struct property *prop)
* Instead we just move the property to the "dead properties" list,
* and add the new property to the property list
*/
-int prom_update_property(struct device_node *np,
- struct property *newprop)
+int of_update_property(struct device_node *np, struct property *newprop)
{
struct property **next, *oldprop;
unsigned long flags;
- int found = 0;
+ int rc, found = 0;
+
+ rc = of_property_notify(OF_RECONFIG_UPDATE_PROPERTY, np, newprop);
+ if (rc)
+ return rc;
if (!newprop->name)
return -EINVAL;
oldprop = of_find_property(np, newprop->name, NULL);
if (!oldprop)
- return prom_add_property(np, newprop);
+ return of_add_property(np, newprop);
write_lock_irqsave(&devtree_lock, flags);
next = &np->properties;
@@ -1246,12 +1277,55 @@ int prom_update_property(struct device_node *np,
* device tree nodes.
*/
+static BLOCKING_NOTIFIER_HEAD(of_reconfig_chain);
+
+int of_reconfig_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&of_reconfig_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_reconfig_notifier_register);
+
+int of_reconfig_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&of_reconfig_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_reconfig_notifier_unregister);
+
+int of_reconfig_notify(unsigned long action, void *p)
+{
+ int rc;
+
+ rc = blocking_notifier_call_chain(&of_reconfig_chain, action, p);
+ return notifier_to_errno(rc);
+}
+
+#ifdef CONFIG_PROC_DEVICETREE
+static void of_add_proc_dt_entry(struct device_node *dn)
+{
+ struct proc_dir_entry *ent;
+
+ ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
+ if (ent)
+ proc_device_tree_add_node(dn, ent);
+}
+#else
+static void of_add_proc_dt_entry(struct device_node *dn)
+{
+ return;
+}
+#endif
+
/**
* of_attach_node - Plug a device node into the tree and global list.
*/
-void of_attach_node(struct device_node *np)
+int of_attach_node(struct device_node *np)
{
unsigned long flags;
+ int rc;
+
+ rc = of_reconfig_notify(OF_RECONFIG_ATTACH_NODE, np);
+ if (rc)
+ return rc;
write_lock_irqsave(&devtree_lock, flags);
np->sibling = np->parent->child;
@@ -1259,24 +1333,61 @@ void of_attach_node(struct device_node *np)
np->parent->child = np;
of_allnodes = np;
write_unlock_irqrestore(&devtree_lock, flags);
+
+ of_add_proc_dt_entry(np);
+ return 0;
}
+#ifdef CONFIG_PROC_DEVICETREE
+static void of_remove_proc_dt_entry(struct device_node *dn)
+{
+ struct device_node *parent = dn->parent;
+ struct property *prop = dn->properties;
+
+ while (prop) {
+ remove_proc_entry(prop->name, dn->pde);
+ prop = prop->next;
+ }
+
+ if (dn->pde)
+ remove_proc_entry(dn->pde->name, parent->pde);
+}
+#else
+static void of_remove_proc_dt_entry(struct device_node *dn)
+{
+ return;
+}
+#endif
+
/**
* of_detach_node - "Unplug" a node from the device tree.
*
* The caller must hold a reference to the node. The memory associated with
* the node is not freed until its refcount goes to zero.
*/
-void of_detach_node(struct device_node *np)
+int of_detach_node(struct device_node *np)
{
struct device_node *parent;
unsigned long flags;
+ int rc = 0;
+
+ rc = of_reconfig_notify(OF_RECONFIG_DETACH_NODE, np);
+ if (rc)
+ return rc;
write_lock_irqsave(&devtree_lock, flags);
+ if (of_node_check_flag(np, OF_DETACHED)) {
+ /* someone already detached it */
+ write_unlock_irqrestore(&devtree_lock, flags);
+ return rc;
+ }
+
parent = np->parent;
- if (!parent)
- goto out_unlock;
+ if (!parent) {
+ write_unlock_irqrestore(&devtree_lock, flags);
+ return rc;
+ }
if (of_allnodes == np)
of_allnodes = np->allnext;
@@ -1301,9 +1412,10 @@ void of_detach_node(struct device_node *np)
}
of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
write_unlock_irqrestore(&devtree_lock, flags);
+
+ of_remove_proc_dt_entry(np);
+ return rc;
}
#endif /* defined(CONFIG_OF_DYNAMIC) */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9c31277..e7068c5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2140,14 +2140,16 @@ config FB_UDL
To compile as a module, choose M here: the module name is udlfb.
config FB_IBM_GXT4500
- tristate "Framebuffer support for IBM GXT4500P adaptor"
+ tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
- Say Y here to enable support for the IBM GXT4500P display
- adaptor, found on some IBM System P (pSeries) machines.
+ Say Y here to enable support for the IBM GXT4000P/6000P and
+ GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+ found on some IBM System P (pSeries) machines. This driver
+ doesn't use Geometry Engine GT1000.
config FB_PS3
tristate "PS3 GPU framebuffer driver"
diff --git a/drivers/video/gxt4500.c b/drivers/video/gxt4500.c
index 0e9afa4..4bdea6e 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/gxt4500.c
@@ -1,5 +1,6 @@
/*
- * Frame buffer device for IBM GXT4500P and GXT6000P display adaptors
+ * Frame buffer device for IBM GXT4500P/6500P and GXT4000P/6000P
+ * display adaptors
*
* Copyright (C) 2006 Paul Mackerras, IBM Corp. <paulus@samba.org>
*/
@@ -14,6 +15,8 @@
#include <linux/string.h>
#define PCI_DEVICE_ID_IBM_GXT4500P 0x21c
+#define PCI_DEVICE_ID_IBM_GXT6500P 0x21b
+#define PCI_DEVICE_ID_IBM_GXT4000P 0x16e
#define PCI_DEVICE_ID_IBM_GXT6000P 0x170
/* GXT4500P registers */
@@ -173,6 +176,8 @@ static const struct fb_videomode defaultmode __devinitconst = {
/* List of supported cards */
enum gxt_cards {
GXT4500P,
+ GXT6500P,
+ GXT4000P,
GXT6000P
};
@@ -182,6 +187,8 @@ static const struct cardinfo {
const char *cardname;
} cardinfo[] = {
[GXT4500P] = { .refclk_ps = 9259, .cardname = "IBM GXT4500P" },
+ [GXT6500P] = { .refclk_ps = 9259, .cardname = "IBM GXT6500P" },
+ [GXT4000P] = { .refclk_ps = 40000, .cardname = "IBM GXT4000P" },
[GXT6000P] = { .refclk_ps = 40000, .cardname = "IBM GXT6000P" },
};
@@ -736,6 +743,10 @@ static void __devexit gxt4500_remove(struct pci_dev *pdev)
static const struct pci_device_id gxt4500_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4500P),
.driver_data = GXT4500P },
+ { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT6500P),
+ .driver_data = GXT6500P },
+ { PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4000P),
+ .driver_data = GXT4000P },
{ PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT6000P),
.driver_data = GXT6000P },
{ 0 }
@@ -768,7 +779,7 @@ static void __exit gxt4500_exit(void)
module_exit(gxt4500_exit);
MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
-MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P/6000P");
+MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P/6500P and GXT4000P/6000P");
MODULE_LICENSE("GPL");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\"");
diff --git a/drivers/virt/fsl_hypervisor.c b/drivers/virt/fsl_hypervisor.c
index 4939e0c..d294f67 100644
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -796,9 +796,6 @@ static int has_fsl_hypervisor(void)
struct device_node *node;
int ret;
- if (!(mfmsr() & MSR_GS))
- return 0;
-
node = of_find_node_by_path("/hypervisor");
if (!node)
return 0;
diff --git a/include/linux/of.h b/include/linux/of.h
index 6cfea9a..5ebcc5c 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -22,6 +22,7 @@
#include <linux/mod_devicetable.h>
#include <linux/spinlock.h>
#include <linux/topology.h>
+#include <linux/notifier.h>
#include <asm/byteorder.h>
#include <asm/errno.h>
@@ -282,16 +283,28 @@ extern int of_alias_get_id(struct device_node *np, const char *stem);
extern int of_machine_is_compatible(const char *compat);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
- struct property *newprop);
+extern int of_add_property(struct device_node *np, struct property *prop);
+extern int of_remove_property(struct device_node *np, struct property *prop);
+extern int of_update_property(struct device_node *np, struct property *newprop);
-#if defined(CONFIG_OF_DYNAMIC)
/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-#endif
+#define OF_RECONFIG_ATTACH_NODE 0x0001
+#define OF_RECONFIG_DETACH_NODE 0x0002
+#define OF_RECONFIG_ADD_PROPERTY 0x0003
+#define OF_RECONFIG_REMOVE_PROPERTY 0x0004
+#define OF_RECONFIG_UPDATE_PROPERTY 0x0005
+
+struct of_prop_reconfig {
+ struct device_node *dn;
+ struct property *prop;
+};
+
+extern int of_reconfig_notifier_register(struct notifier_block *);
+extern int of_reconfig_notifier_unregister(struct notifier_block *);
+extern int of_reconfig_notify(unsigned long, void *);
+
+extern int of_attach_node(struct device_node *);
+extern int of_detach_node(struct device_node *);
#define of_match_ptr(_ptr) (_ptr)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e458782..3a35309 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1192,14 +1192,14 @@ config MEMORY_NOTIFIER_ERROR_INJECT
If unsure, say N.
-config PSERIES_RECONFIG_NOTIFIER_ERROR_INJECT
- tristate "pSeries reconfig notifier error injection module"
- depends on PPC_PSERIES && NOTIFIER_ERROR_INJECTION
+config OF_RECONFIG_NOTIFIER_ERROR_INJECT
+ tristate "OF reconfig notifier error injection module"
+ depends on OF_DYNAMIC && NOTIFIER_ERROR_INJECTION
help
This option provides the ability to inject artificial errors to
- pSeries reconfig notifier chain callbacks. It is controlled
+ OF reconfig notifier chain callbacks. It is controlled
through debugfs interface under
- /sys/kernel/debug/notifier-error-inject/pSeries-reconfig/
+ /sys/kernel/debug/notifier-error-inject/OF-reconfig/
If the notifier call chain should be failed with some events
notified, write the error code to "actions/<notifier event>/error".
diff --git a/lib/Makefile b/lib/Makefile
index 5558e35..02ed6c0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -95,8 +95,8 @@ obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_CPU_NOTIFIER_ERROR_INJECT) += cpu-notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
obj-$(CONFIG_MEMORY_NOTIFIER_ERROR_INJECT) += memory-notifier-error-inject.o
-obj-$(CONFIG_PSERIES_RECONFIG_NOTIFIER_ERROR_INJECT) += \
- pSeries-reconfig-notifier-error-inject.o
+obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \
+ of-reconfig-notifier-error-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
diff --git a/lib/pSeries-reconfig-notifier-error-inject.c b/lib/of-reconfig-notifier-error-inject.c
index 7f7c98d..8dc7986 100644
--- a/lib/pSeries-reconfig-notifier-error-inject.c
+++ b/lib/of-reconfig-notifier-error-inject.c
@@ -1,20 +1,20 @@
#include <linux/kernel.h>
#include <linux/module.h>
-
-#include <asm/pSeries_reconfig.h>
+#include <linux/of.h>
#include "notifier-error-inject.h"
static int priority;
module_param(priority, int, 0);
-MODULE_PARM_DESC(priority, "specify pSeries reconfig notifier priority");
+MODULE_PARM_DESC(priority, "specify OF reconfig notifier priority");
static struct notifier_err_inject reconfig_err_inject = {
.actions = {
- { NOTIFIER_ERR_INJECT_ACTION(PSERIES_RECONFIG_ADD) },
- { NOTIFIER_ERR_INJECT_ACTION(PSERIES_RECONFIG_REMOVE) },
- { NOTIFIER_ERR_INJECT_ACTION(PSERIES_DRCONF_MEM_ADD) },
- { NOTIFIER_ERR_INJECT_ACTION(PSERIES_DRCONF_MEM_REMOVE) },
+ { NOTIFIER_ERR_INJECT_ACTION(OF_RECONFIG_ATTACH_NODE) },
+ { NOTIFIER_ERR_INJECT_ACTION(OF_RECONFIG_DETACH_NODE) },
+ { NOTIFIER_ERR_INJECT_ACTION(OF_RECONFIG_ADD_PROPERTY) },
+ { NOTIFIER_ERR_INJECT_ACTION(OF_RECONFIG_REMOVE_PROPERTY) },
+ { NOTIFIER_ERR_INJECT_ACTION(OF_RECONFIG_UPDATE_PROPERTY) },
{}
}
};
@@ -25,12 +25,12 @@ static int err_inject_init(void)
{
int err;
- dir = notifier_err_inject_init("pSeries-reconfig",
+ dir = notifier_err_inject_init("OF-reconfig",
notifier_err_inject_dir, &reconfig_err_inject, priority);
if (IS_ERR(dir))
return PTR_ERR(dir);
- err = pSeries_reconfig_notifier_register(&reconfig_err_inject.nb);
+ err = of_reconfig_notifier_register(&reconfig_err_inject.nb);
if (err)
debugfs_remove_recursive(dir);
@@ -39,13 +39,13 @@ static int err_inject_init(void)
static void err_inject_exit(void)
{
- pSeries_reconfig_notifier_unregister(&reconfig_err_inject.nb);
+ of_reconfig_notifier_unregister(&reconfig_err_inject.nb);
debugfs_remove_recursive(dir);
}
module_init(err_inject_init);
module_exit(err_inject_exit);
-MODULE_DESCRIPTION("pSeries reconfig notifier error injection module");
+MODULE_DESCRIPTION("OF reconfig notifier error injection module");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
OpenPOWER on IntegriCloud