diff options
author | Maxime Ripard <maxime.ripard@free-electrons.com> | 2013-11-07 12:01:48 +0100 |
---|---|---|
committer | Daniel Lezcano <daniel.lezcano@linaro.org> | 2013-12-11 11:37:50 +0100 |
commit | 67905540e8b8eaf51e621cfd2ef15641d6d5b9a7 (patch) | |
tree | e5f34ff5d62c075201fcd2337383cbac66183c50 | |
parent | 5df9affb50a09e0cb571c4fa3e2d577db85c7475 (diff) | |
download | op-kernel-dev-67905540e8b8eaf51e621cfd2ef15641d6d5b9a7.zip op-kernel-dev-67905540e8b8eaf51e621cfd2ef15641d6d5b9a7.tar.gz |
clocksource: Add Allwinner SoCs HS timers driver
Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.
The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.
[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
alphabetically"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-rw-r--r-- | Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 | ||||
-rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 1 | ||||
-rw-r--r-- | drivers/clocksource/Kconfig | 4 | ||||
-rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
-rw-r--r-- | drivers/clocksource/timer-sun5i.c | 192 |
5 files changed, 220 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt new file mode 100644 index 0000000..7c26154 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -0,0 +1,22 @@ +Allwinner SoCs High Speed Timer Controller + +Required properties: + +- compatible : should be "allwinner,sun5i-a13-hstimer" or + "allwinner,sun7i-a20-hstimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i + one) +- clocks: phandle to the source clock (usually the AHB clock) + +Example: + +timer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 1>, + <0 52 1>, + <0 53 1>, + <0 54 1>; + clocks = <&ahb1_gates 19>; +}; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index c9e72c8..bce0d42 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -12,3 +12,4 @@ config ARCH_SUNXI select PINCTRL_SUNXI select SPARSE_IRQ select SUN4I_TIMER + select SUN5I_HSTIMER diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index bdb953e..884eeff 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -37,6 +37,10 @@ config SUN4I_TIMER select CLKSRC_MMIO bool +config SUN5I_HSTIMER + select CLKSRC_MMIO + bool + config VT8500_TIMER bool diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 33621ef..358358d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o obj-$(CONFIG_ARCH_MXS) += mxs_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o +obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c new file mode 100644 index 0000000..bddc522 --- /dev/null +++ b/drivers/clocksource/timer-sun5i.c @@ -0,0 +1,192 @@ +/* + * Allwinner SoCs hstimer driver. + * + * Copyright (C) 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#define TIMER_IRQ_EN_REG 0x00 +#define TIMER_IRQ_EN(val) BIT(val) +#define TIMER_IRQ_ST_REG 0x04 +#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10) +#define TIMER_CTL_ENABLE BIT(0) +#define TIMER_CTL_RELOAD BIT(1) +#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) +#define TIMER_CTL_ONESHOT BIT(7) +#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14) +#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18) +#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c) +#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20) + +#define TIMER_SYNC_TICKS 3 + +static void __iomem *timer_base; +static u32 ticks_per_jiffy; + +/* + * When we disable a timer, we need to wait at least for 2 cycles of + * the timer source clock. We will use for that the clocksource timer + * that is already setup and runs at the same frequency than the other + * timers, and we never will be disabled. + */ +static void sun5i_clkevt_sync(void) +{ + u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1)); + + while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) + cpu_relax(); +} + +static void sun5i_clkevt_time_stop(u8 timer) +{ + u32 val = readl(timer_base + TIMER_CTL_REG(timer)); + writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); + + sun5i_clkevt_sync(); +} + +static void sun5i_clkevt_time_setup(u8 timer, u32 delay) +{ + writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer)); +} + +static void sun5i_clkevt_time_start(u8 timer, bool periodic) +{ + u32 val = readl(timer_base + TIMER_CTL_REG(timer)); + + if (periodic) + val &= ~TIMER_CTL_ONESHOT; + else + val |= TIMER_CTL_ONESHOT; + + writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, + timer_base + TIMER_CTL_REG(timer)); +} + +static void sun5i_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + sun5i_clkevt_time_stop(0); + sun5i_clkevt_time_setup(0, ticks_per_jiffy); + sun5i_clkevt_time_start(0, true); + break; + case CLOCK_EVT_MODE_ONESHOT: + sun5i_clkevt_time_stop(0); + sun5i_clkevt_time_start(0, false); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + sun5i_clkevt_time_stop(0); + break; + } +} + +static int sun5i_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + sun5i_clkevt_time_stop(0); + sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); + sun5i_clkevt_time_start(0, false); + + return 0; +} + +static struct clock_event_device sun5i_clockevent = { + .name = "sun5i_tick", + .rating = 340, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sun5i_clkevt_mode, + .set_next_event = sun5i_clkevt_next_event, +}; + + +static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + writel(0x1, timer_base + TIMER_IRQ_ST_REG); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction sun5i_timer_irq = { + .name = "sun5i_timer0", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = sun5i_timer_interrupt, + .dev_id = &sun5i_clockevent, +}; + +static u32 sun5i_timer_sched_read(void) +{ + return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1)); +} + +static void __init sun5i_timer_init(struct device_node *node) +{ + unsigned long rate; + struct clk *clk; + int ret, irq; + u32 val; + + timer_base = of_iomap(node, 0); + if (!timer_base) + panic("Can't map registers"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("Can't get timer clock"); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + + writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); + writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, + timer_base + TIMER_CTL_REG(1)); + + setup_sched_clock(sun5i_timer_sched_read, 32, rate); + clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name, + rate, 340, 32, clocksource_mmio_readl_down); + + ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); + + ret = setup_irq(irq, &sun5i_timer_irq); + if (ret) + pr_warn("failed to setup irq %d\n", irq); + + /* Enable timer0 interrupt */ + val = readl(timer_base + TIMER_IRQ_EN_REG); + writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); + + sun5i_clockevent.cpumask = cpu_possible_mask; + sun5i_clockevent.irq = irq; + + clockevents_config_and_register(&sun5i_clockevent, rate, + TIMER_SYNC_TICKS, 0xffffffff); +} +CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", + sun5i_timer_init); +CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer", + sun5i_timer_init); |