diff options
author | Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> | 2014-11-06 22:46:14 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-11-06 14:59:41 -0800 |
commit | dadd7ecbff4bf01ec446c4390cfeab20124b5708 (patch) | |
tree | 46cd4cbff3459008ff825d74af378e5a1b10a725 | |
parent | 13bd3e6fa177883914fa64b609651e56d58eea65 (diff) | |
download | op-kernel-dev-dadd7ecbff4bf01ec446c4390cfeab20124b5708.zip op-kernel-dev-dadd7ecbff4bf01ec446c4390cfeab20124b5708.tar.gz |
serial/omap: Use the rs485 functions on serial_core
In order to unify all the rs485 ioctl handling
Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core.
Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 69 |
1 files changed, 22 insertions, 47 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 9d22d33..050d1b5 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -163,7 +163,6 @@ struct uart_omap_port { u8 wakeups_enabled; u32 features; - struct serial_rs485 rs485; int rts_gpio; struct pm_qos_request pm_qos_request; @@ -316,7 +315,7 @@ static void serial_omap_stop_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); /* Handle RS-485 */ - if (up->rs485.flags & SER_RS485_ENABLED) { + if (port->rs485.flags & SER_RS485_ENABLED) { if (up->scr & OMAP_UART_SCR_TX_EMPTY) { /* THR interrupt is fired when both TX FIFO and TX * shift register are empty. This means there's nothing @@ -327,10 +326,12 @@ static void serial_omap_stop_tx(struct uart_port *port) */ up->scr &= ~OMAP_UART_SCR_TX_EMPTY; serial_out(up, UART_OMAP_SCR, up->scr); - res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0; + res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? + 1 : 0; if (gpio_get_value(up->rts_gpio) != res) { - if (up->rs485.delay_rts_after_send > 0) - mdelay(up->rs485.delay_rts_after_send); + if (port->rs485.delay_rts_after_send > 0) + mdelay( + port->rs485.delay_rts_after_send); gpio_set_value(up->rts_gpio, res); } } else { @@ -353,8 +354,8 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - if ((up->rs485.flags & SER_RS485_ENABLED) && - !(up->rs485.flags & SER_RS485_RX_DURING_TX)) { + if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { /* * Empty the RX FIFO, we are not interested in anything * received during the half-duplex transmission. @@ -429,22 +430,22 @@ static void serial_omap_start_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); /* Handle RS-485 */ - if (up->rs485.flags & SER_RS485_ENABLED) { + if (port->rs485.flags & SER_RS485_ENABLED) { /* Fire THR interrupts when FIFO is below trigger level */ up->scr &= ~OMAP_UART_SCR_TX_EMPTY; serial_out(up, UART_OMAP_SCR, up->scr); /* if rts not already enabled */ - res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; + res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; if (gpio_get_value(up->rts_gpio) != res) { gpio_set_value(up->rts_gpio, res); - if (up->rs485.delay_rts_before_send > 0) - mdelay(up->rs485.delay_rts_before_send); + if (port->rs485.delay_rts_before_send > 0) + mdelay(port->rs485.delay_rts_before_send); } } - if ((up->rs485.flags & SER_RS485_ENABLED) && - !(up->rs485.flags & SER_RS485_RX_DURING_TX)) + if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) serial_omap_stop_rx(port); serial_omap_enable_ier_thri(up); @@ -1355,7 +1356,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up) #endif /* Enable or disable the rs485 support */ -static void +static int serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) { struct uart_omap_port *up = to_uart_omap_port(port); @@ -1372,7 +1373,7 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) serial_out(up, UART_IER, 0); /* store new config */ - up->rs485 = *rs485conf; + port->rs485 = *rs485conf; /* * Just as a precaution, only allow rs485 @@ -1380,12 +1381,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) */ if (gpio_is_valid(up->rts_gpio)) { /* enable / disable rts */ - val = (up->rs485.flags & SER_RS485_ENABLED) ? + val = (port->rs485.flags & SER_RS485_ENABLED) ? SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; - val = (up->rs485.flags & val) ? 1 : 0; + val = (port->rs485.flags & val) ? 1 : 0; gpio_set_value(up->rts_gpio, val); } else - up->rs485.flags &= ~SER_RS485_ENABLED; + port->rs485.flags &= ~SER_RS485_ENABLED; /* Enable interrupts */ up->ier = mode; @@ -1394,7 +1395,7 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) /* If RS-485 is disabled, make sure the THR interrupt is fired when * TX FIFO is below the trigger level. */ - if (!(up->rs485.flags & SER_RS485_ENABLED) && + if (!(port->rs485.flags & SER_RS485_ENABLED) && (up->scr & OMAP_UART_SCR_TX_EMPTY)) { up->scr &= ~OMAP_UART_SCR_TX_EMPTY; serial_out(up, UART_OMAP_SCR, up->scr); @@ -1403,36 +1404,10 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) spin_unlock_irqrestore(&up->port.lock, flags); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); -} - -static int -serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) -{ - struct serial_rs485 rs485conf; - - switch (cmd) { - case TIOCSRS485: - if (copy_from_user(&rs485conf, (void __user *) arg, - sizeof(rs485conf))) - return -EFAULT; - serial_omap_config_rs485(port, &rs485conf); - break; - - case TIOCGRS485: - if (copy_to_user((void __user *) arg, - &(to_uart_omap_port(port)->rs485), - sizeof(rs485conf))) - return -EFAULT; - break; - - default: - return -ENOIOCTLCMD; - } return 0; } - static struct uart_ops serial_omap_pops = { .tx_empty = serial_omap_tx_empty, .set_mctrl = serial_omap_set_mctrl, @@ -1453,7 +1428,6 @@ static struct uart_ops serial_omap_pops = { .request_port = serial_omap_request_port, .config_port = serial_omap_config_port, .verify_port = serial_omap_verify_port, - .ioctl = serial_omap_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_put_char = serial_omap_poll_put_char, .poll_get_char = serial_omap_poll_get_char, @@ -1587,7 +1561,7 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) static int serial_omap_probe_rs485(struct uart_omap_port *up, struct device_node *np) { - struct serial_rs485 *rs485conf = &up->rs485; + struct serial_rs485 *rs485conf = &up->port.rs485; u32 rs485_delay[2]; enum of_gpio_flags flags; int ret; @@ -1709,6 +1683,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.membase = base; up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; + up->port.rs485_config = serial_omap_config_rs485; if (!up->port.uartclk) { up->port.uartclk = DEFAULT_CLK_SPEED; dev_warn(&pdev->dev, |