diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-06 13:26:27 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-06 13:26:27 -0700 |
| commit | dccfd1e439c11422d7aca0d834b0430d24650e85 (patch) | |
| tree | d4bb17a46ced7027775e7c8c835ed7f165e5ebac | |
| parent | 8e73e367f7dc50f1d1bc22a63e5764bb4eea9b48 (diff) | |
| parent | 56e9e0f3a3c558b42db2dd5120d3a839e4beb282 (diff) | |
| download | op-kernel-dev-dccfd1e439c11422d7aca0d834b0430d24650e85.zip op-kernel-dev-dccfd1e439c11422d7aca0d834b0430d24650e85.tar.gz | |
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson:
"Device tree and bindings updates for 3.12.
General additions of various on-chip and on-board peripherals on
various platforms as support gets added. Some of the bigger changes
are:
- Addition of (new) PCI-e support on Tegra.
- More Tegra4 support, including PMC configuration for Dalmore.
- Addition of a new board for Exynos4 (trats2) and more bindings for
4x12 IP.
- Addition of Allwinner A20 and A31 SoC and board files.
- Move of the ST Ericsson device tree files to now use ste-* prefix.
- More move of hardware description of shmobile platforms to DT.
- Two new board dts files for Freescale MXs"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
dts: Rename DW APB timer compatible strings
dts: Deprecate ALTR as a vendor prefix
of: add vendor prefix for Altera Corp.
ARM: at91/dt: sam9x5ek: add sound configuration
ARM: at91/dt: sam9x5ek: enable SSC
ARM: at91/dt: sam9x5ek: add WM8731 codec
ARM: at91/dt: sam9x5: add SSC DMA parameters
ARM: at91/dt: add at91rm9200 PQFP package version
ARM: at91: at91rm9200: set default mmc0 pinctrl-names
ARM: at91: at91sam9n12: correct pin number of gpio-key
ARM: at91: at91sam9n12: add qt1070 support
ARM: at91: at91sam9n12: add pinctrl of TWI
ARM: at91: Add PMU support for sama5d3
ARM: at91: at91sam9260: add missing pinctrl-names on mmc
ARM: tegra: configure power off for Dalmore
ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
ARM: dts: add sdio blocks to bcm28155-ap board
ARM: dts: align sdio numbers to HW definition
ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
ARM: sun7i: Add Allwinner A20 DTSI
...
135 files changed, 4721 insertions, 682 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt index fb7b5cd..0ff6560 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt +++ b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt @@ -6,4 +6,5 @@ bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: Required root node property: -compatible = "bcm,bcm11351"; +compatible = "brcm,bcm11351"; +DEPRECATED: compatible = "bcm,bcm11351"; diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt index 59fa6e6..17d88b2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt @@ -4,14 +4,15 @@ This timer is used in the following Broadcom SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 Required properties: -- compatible : "bcm,kona-timer" +- compatible : "brcm,kona-timer" +- DEPRECATED: compatible : "bcm,kona-timer" - reg : Register range for the timer - interrupts : interrupt for the timer - clock-frequency: frequency that the clock operates Example: timer@35006000 { - compatible = "bcm,kona-timer"; + compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <0x0 7 0x4>; clock-frequency = <32768>; diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt b/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt new file mode 100644 index 0000000..2b86a00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt @@ -0,0 +1,15 @@ +Broadcom Kona Family Watchdog Timer +----------------------------------- + +This watchdog timer is used in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 + +Required properties: + - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + - reg: memory address & range + +Example: + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 36bd2d6..f418168 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -16,9 +16,9 @@ Required properties: mapped region. - interrupts : MFC interrupt number to the CPU. - - clocks : from common clock binding: handle to mfc clocks. - - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc", - corresponding to entries in the clocks property. + - clocks : from common clock binding: handle to mfc clock. + - clock-names : from common clock binding: must contain "mfc", + corresponding to entry in the clocks property. - samsung,mfc-r : Base address of the first memory bank used by MFC for DMA contiguous memory allocation and its size. @@ -38,8 +38,8 @@ mfc: codec@13400000 { reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 170>, <&clock 273>; - clock-names = "sclk_mfc", "mfc"; + clocks = <&clock 273>; + clock-names = "mfc"; }; Board specific DT entry: diff --git a/Documentation/devicetree/bindings/misc/smc.txt b/Documentation/devicetree/bindings/misc/smc.txt index 02b4281..6c9f176 100644 --- a/Documentation/devicetree/bindings/misc/smc.txt +++ b/Documentation/devicetree/bindings/misc/smc.txt @@ -4,11 +4,12 @@ This binding defines the location of the bounce buffer used for non-secure to secure communications. Required properties: -- compatible : "bcm,kona-smc" +- compatible : "brcm,kona-smc" +- DEPRECATED: compatible : "bcm,kona-smc" - reg : Location and size of bounce buffer Example: smc@0x3404c000 { - compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; //1 KiB in SRAM }; diff --git a/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt index 094ae01..789fb07 100644 --- a/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt @@ -4,12 +4,13 @@ This file documents differences between the core properties in mmc.txt and the properties present in the bcm281xx SDHCI Required properties: -- compatible : Should be "bcm,kona-sdhci" +- compatible : Should be "brcm,kona-sdhci" +- DEPRECATED: compatible : Should be "bcm,kona-sdhci" Example: sdio2: sdio@0x3f1a0000 { - compatible = "bcm,kona-sdhci"; + compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; interrupts = <0x0 74 0x4>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt index e204d00..fb70856 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt @@ -80,6 +80,17 @@ Valid values for pin and group names are: dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, gmh, owr, uda. +Valid values for nvidia,functions are: + + blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, + displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, + extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, + i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, + pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, + rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, + spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, + usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 + Example: pinmux: pinmux { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt index 683fde9..61e73cd 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -103,6 +103,17 @@ Valid values for pin and group names are: drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda. +Valid values for nvidia,functions are: + + ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5, + displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int, + hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand, + osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3, + pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, + sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, + spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, + vi, vi_sensor_clk, xio + Example: pinctrl@70000000 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt index 6f426ed..0e6354c 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt @@ -91,6 +91,18 @@ Valid values for pin and group names are: gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, uart3, uda, vi1. +Valid values for nvidia,functions are: + + blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt, + dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2, + extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3, + i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand, + nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, + rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1, + spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta, + uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, + vi, vi_alt1, vi_alt2, vi_alt3 + Example: pinctrl@70000000 { diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt index 9a2f3f4..6b33b9f 100644 --- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt +++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt @@ -1,8 +1,8 @@ ST Ericsson Nomadik pinmux controller Required properties: -- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540", - "stericsson,nmk-pinctrl-stn8815" +- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl", + "stericsson,stn8815-pinctrl" - reg: Should contain the register physical address and length of the PRCMU. Please refer to pinctrl-bindings.txt in this directory for details of the @@ -68,7 +68,7 @@ Optional subnode-properties: Example board file extract: pinctrl@80157000 { - compatible = "stericsson,nmk-pinctrl"; + compatible = "stericsson,db8500-pinctrl"; reg = <0x80157000 0x2000>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt index eb2327b..c703d51 100644 --- a/Documentation/devicetree/bindings/rtc/dw-apb.txt +++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt @@ -1,7 +1,10 @@ * Designware APB timer Required properties: -- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc" +- compatible: One of: + "snps,dw-apb-timer" + "snps,dw-apb-timer-sp" <DEPRECATED> + "snps,dw-apb-timer-osc" <DEPRECATED> - reg: physical base address of the controller and length of memory mapped region. - interrupts: IRQ line for the timer. @@ -20,25 +23,10 @@ systems may use one. Example: - - timer1: timer@ffc09000 { - compatible = "snps,dw-apb-timer-sp"; - interrupts = <0 168 4>; - clock-frequency = <200000000>; - reg = <0xffc09000 0x1000>; - }; - - timer2: timer@ffd00000 { - compatible = "snps,dw-apb-timer-osc"; - interrupts = <0 169 4>; - clock-frequency = <200000000>; - reg = <0xffd00000 0x1000>; - }; - - timer3: timer@ffe00000 { - compatible = "snps,dw-apb-timer-osc"; - interrupts = <0 170 4>; - reg = <0xffe00000 0x1000>; - clocks = <&timer_clk>, <&timer_pclk>; - clock-names = "timer", "pclk"; - }; + timer@ffe00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 170 4>; + reg = <0xffe00000 0x1000>; + clocks = <&timer_clk>, <&timer_pclk>; + clock-names = "timer", "pclk"; + }; diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt index c152f65..55a9010 100644 --- a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt +++ b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt @@ -1,4 +1,5 @@ Altera JTAG UART Required properties: -- compatible : should be "ALTR,juart-1.0" +- compatible : should be "ALTR,juart-1.0" <DEPRECATED> +- compatible : should be "altr,juart-1.0" diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt index 71cae3f..81bf7ff 100644 --- a/Documentation/devicetree/bindings/serial/altera_uart.txt +++ b/Documentation/devicetree/bindings/serial/altera_uart.txt @@ -1,7 +1,8 @@ Altera UART Required properties: -- compatible : should be "ALTR,uart-1.0" +- compatible : should be "ALTR,uart-1.0" <DEPRECATED> +- compatible : should be "altr,uart-1.0" Optional properties: - clock-frequency : frequency of the clock input to the UART diff --git a/Documentation/devicetree/bindings/serio/altera_ps2.txt b/Documentation/devicetree/bindings/serio/altera_ps2.txt index 4d9eecc..520199e 100644 --- a/Documentation/devicetree/bindings/serio/altera_ps2.txt +++ b/Documentation/devicetree/bindings/serio/altera_ps2.txt @@ -1,4 +1,5 @@ Altera UP PS/2 controller Required properties: -- compatible : should be "ALTR,ps2-1.0". +- compatible : should be "ALTR,ps2-1.0". <DEPRECATED> +- compatible : should be "altr,ps2-1.0". diff --git a/Documentation/devicetree/bindings/spi/spi_altera.txt b/Documentation/devicetree/bindings/spi/spi_altera.txt index dda3759..31319dc 100644 --- a/Documentation/devicetree/bindings/spi/spi_altera.txt +++ b/Documentation/devicetree/bindings/spi/spi_altera.txt @@ -1,4 +1,5 @@ Altera SPI Required properties: -- compatible : should be "ALTR,spi-1.0". +- compatible : should be "ALTR,spi-1.0". <DEPRECATED> +- compatible : should be "altr,spi-1.0". diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ec4d713..b571560 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -7,6 +7,7 @@ ad Avionic Design GmbH adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. +altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6fd2cea..a37a50f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9..454288d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -42,7 +42,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb +dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ + bcm28155-ap.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ @@ -53,13 +54,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ exynos4412-odroidx.dtb \ - exynos4412-smdk4412.dtb \ exynos4412-origen.dtb \ + exynos4412-smdk4412.dtb \ + exynos4412-trats2.dtb \ exynos5250-arndale.dtb \ - exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5420-smdk5420.dtb \ + exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -143,7 +145,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-cfa10055.dtb \ + imx28-cfa10056.dtb \ imx28-cfa10057.dtb \ + imx28-cfa10058.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ @@ -176,13 +180,14 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am43x-epos-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ - hrefprev60.dtb \ - hrefv60plus.dtb \ - ccu8540.dtb \ - ccu9540.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60.dtb \ + ste-hrefv60plus.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7740-armadillo800eva-reference.dtb \ @@ -192,6 +197,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ sh73a0-kzm9g-reference.dtb \ r8a73a4-ape6evm.dtb \ sh7372-mackerel.dtb +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ @@ -206,11 +212,14 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2020.dtb dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb + sun5i-a13-olinuxino.dtb \ + sun6i-a31-colombus.dtb \ + sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ @@ -224,8 +233,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra114-dalmore.dtb \ - tegra114-pluto.dtb + tegra114-dalmore.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 92b9e21..f770655 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -120,6 +120,7 @@ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi new file mode 100644 index 0000000..93ca66f --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi @@ -0,0 +1,17 @@ +/* + * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91rm9200.dtsi" + +/ { + compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200"; +}; + +&pioD { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index c7ccbcb..56ee828 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -572,6 +572,7 @@ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bb7f564..9fb7ffd 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -291,6 +291,22 @@ }; }; + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; @@ -471,6 +487,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; status = "disabled"; }; @@ -483,6 +501,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 3d77dbe..27a9352 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -40,6 +40,15 @@ i2c0: i2c@f8010000 { status = "okay"; + + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioA>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + }; }; i2c1: i2c@f8014000 { @@ -66,6 +75,13 @@ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; + + qt1070 { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; }; spi0: spi@f0000000 { @@ -121,7 +137,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 GPIO_ACTIVE_LOW>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 57d45f5..cf78ac0 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -542,6 +542,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 49e3c45..3a9f6fa 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -59,6 +59,11 @@ i2c0: i2c@f8010000 { status = "okay"; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; }; pinctrl@fffff400 { @@ -90,6 +95,10 @@ watchdog@fffffe40 { status = "okay"; }; + + ssc0: ssc@f0010000 { + status = "okay"; + }; }; usb0: ohci@00600000 { @@ -105,4 +114,19 @@ status = "okay"; }; }; + + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; }; diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 67ec524..9d36eb4 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -17,7 +17,7 @@ / { model = "BCM11351 BRT board"; - compatible = "bcm,bcm11351-brt", "bcm,bcm11351"; + compatible = "brcm,bcm11351-brt", "brcm,bcm11351"; memory { reg = <0x80000000 0x40000000>; /* 1 GB */ @@ -27,18 +27,18 @@ status = "okay"; }; - sdio0: sdio@0x3f180000 { + sdio1: sdio@3f180000 { max-frequency = <48000000>; status = "okay"; }; - sdio1: sdio@0x3f190000 { + sdio2: sdio@3f190000 { non-removable; max-frequency = <48000000>; status = "okay"; }; - sdio3: sdio@0x3f1b0000 { + sdio4: sdio@3f1b0000 { max-frequency = <48000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index c0cdf66..05a5aab 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Broadcom Corporation + * Copyright (C) 2012-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -18,7 +18,7 @@ / { model = "BCM11351 SoC"; - compatible = "bcm,bcm11351"; + compatible = "brcm,bcm11351"; interrupt-parent = <&gic>; chosen { @@ -35,12 +35,12 @@ }; smc@0x3404c000 { - compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ }; uart@3e000000 { - compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x1000>; clock-frequency = <13000000>; @@ -50,42 +50,47 @@ }; L2: l2-cache { - compatible = "bcm,bcm11351-a2-pl310-cache"; + compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; cache-level = <2>; }; + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; + timer@35006000 { - compatible = "bcm,kona-timer"; + compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <32768>; }; - sdio0: sdio@0x3f180000 { - compatible = "bcm,kona-sdhci"; + sdio1: sdio@3f180000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x10000>; interrupts = <0x0 77 0x4>; status = "disabled"; }; - sdio1: sdio@0x3f190000 { - compatible = "bcm,kona-sdhci"; + sdio2: sdio@3f190000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x10000>; interrupts = <0x0 76 0x4>; status = "disabled"; }; - sdio2: sdio@0x3f1a0000 { - compatible = "bcm,kona-sdhci"; + sdio3: sdio@3f1a0000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; interrupts = <0x0 74 0x4>; status = "disabled"; }; - sdio3: sdio@0x3f1b0000 { - compatible = "bcm,kona-sdhci"; + sdio4: sdio@3f1b0000 { + compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x10000>; interrupts = <0x0 73 0x4>; status = "disabled"; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts new file mode 100644 index 0000000..96ae67a --- /dev/null +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm11351.dtsi" + +/ { + model = "BCM28155 AP board"; + compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; + + memory { + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + uart@3e000000 { + status = "okay"; + }; + + sdio1: sdio@3f180000 { + max-frequency = <48000000>; + status = "okay"; + }; + + sdio2: sdio@3f190000 { + non-removable; + max-frequency = <48000000>; + status = "okay"; + }; + + sdio4: sdio@3f1b0000 { + max-frequency = <48000000>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts deleted file mode 100644 index 48ff034..0000000 --- a/arch/arm/boot/dts/ccu8540.dts +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2013 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "dbx5x0.dtsi" - -/ { - model = "ST-Ericsson U8540 platform with Device Tree"; - compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; - - memory@0 { - reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; - }; - - soc { - prcmu@80157000 { - reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; - reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - }; - - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts new file mode 100644 index 0000000..bed676b --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d-reference", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index b9b3241..dda13bc 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index c8a8c08..99ad2b2 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -14,6 +14,14 @@ compatible = "renesas,emev2"; interrupt-parent = <&gic>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,4 +75,55 @@ reg = <0xe1050000 0x38>; interrupts = <0 11 0>; }; + + gpio0: gpio@e0050000 { + compatible = "renesas,em-gio"; + reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; + interrupts = <0 67 0>, <0 68 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio1: gpio@e0050080 { + compatible = "renesas,em-gio"; + reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; + interrupts = <0 69 0>, <0 70 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio2: gpio@e0050100 { + compatible = "renesas,em-gio"; + reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; + interrupts = <0 71 0>, <0 72 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio3: gpio@e0050180 { + compatible = "renesas,em-gio"; + reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; + interrupts = <0 73 0>, <0 74 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio4: gpio@e0050200 { + compatible = "renesas,em-gio"; + reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; + interrupts = <0 75 0>, <0 76 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <31>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 3f94fe8..93c2501 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -36,6 +36,12 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + csis0 = &csis_0; + csis1 = &csis_1; + fimc0 = &fimc_0; + fimc1 = &fimc_1; + fimc2 = &fimc_2; + fimc3 = &fimc_3; }; chipid@10000000 { @@ -92,6 +98,88 @@ reg = <0x10010000 0x400>; }; + camera { + compatible = "samsung,fimc", "simple-bus"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + fimc_0: fimc@11800000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11800000 0x1000>; + interrupts = <0 84 0>; + clocks = <&clock 256>, <&clock 128>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_1: fimc@11810000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11810000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock 257>, <&clock 129>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_2: fimc@11820000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11820000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock 258>, <&clock 130>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + fimc_3: fimc@11830000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11830000 0x1000>; + interrupts = <0 87 0>; + clocks = <&clock 259>, <&clock 131>; + clock-names = "fimc", "sclk_fimc"; + samsung,power-domain = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + csis_0: csis@11880000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11880000 0x4000>; + interrupts = <0 78 0>; + clocks = <&clock 260>, <&clock 134>; + clock-names = "csis", "sclk_csis"; + bus-width = <4>; + samsung,power-domain = <&pd_cam>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + csis_1: csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + interrupts = <0 80 0>; + clocks = <&clock 261>, <&clock 135>; + clock-names = "csis", "sclk_csis"; + bus-width = <2>; + samsung,power-domain = <&pd_cam>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -155,13 +243,31 @@ status = "disabled"; }; + ehci@12580000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12580000 0x100>; + interrupts = <0 70 0>; + clocks = <&clock 304>; + clock-names = "usbhost"; + status = "disabled"; + }; + + ohci@12590000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12590000 0x100>; + interrupts = <0 70 0>; + clocks = <&clock 304>; + clock-names = "usbhost"; + status = "disabled"; + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 170>, <&clock 273>; - clock-names = "sclk_mfc", "mfc"; + clocks = <&clock 273>; + clock-names = "mfc"; status = "disabled"; }; @@ -297,8 +403,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 327>, <&clock 159>; @@ -312,8 +418,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 7>; /* preliminary */ - rx-dma-channel = <&pdma1 6>; /* preliminary */ + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 328>, <&clock 160>; @@ -327,8 +433,8 @@ compatible = "samsung,exynos4210-spi"; reg = <0x13940000 0x100>; interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 9>; /* preliminary */ - rx-dma-channel = <&pdma0 8>; /* preliminary */ + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clock 329>, <&clock 161>; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 553bcea..a7c2128 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -797,6 +797,29 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 94eebff..1c164f2 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -30,13 +30,62 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; }; - vemmc_reg: voltage-regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 0>; + enable-active-high; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 0>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 0>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 0>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 0>; + enable-active-high; + }; }; sdhci_emmc: sdhci@12510000 { @@ -97,15 +146,6 @@ }; }; - tsp_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "TSP_FIXED_VOLTAGES"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 0>; - enable-active-high; - }; - i2c@13890000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -218,6 +258,12 @@ regulator-always-on; }; + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vcclcd_reg: LDO13 { regulator-name = "VCC_3.3V_LCD"; regulator-min-microvolt = <3300000>; @@ -301,4 +347,26 @@ clock-frequency = <24000000>; }; }; + + camera { + pinctrl-names = "default"; + pinctrl-0 = <>; + status = "okay"; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 53e2527..057d682 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -125,4 +125,34 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + + fimc_3: fimc@11830000 { + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 7993641..8768b03 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -27,6 +27,11 @@ bootargs ="console=ttySAC2,115200"; }; + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; + mmc_reg: voltage-regulator { compatible = "regulator-fixed"; regulator-name = "VMEM_VDD_2.8V"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts new file mode 100644 index 0000000..fb7b9ae --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -0,0 +1,579 @@ +/* + * Samsung's Exynos4412 based Trats 2 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats 2 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412.dtsi" + +/ { + model = "Samsung Trats 2 based on Exynos4412"; + compatible = "samsung,trats2", "samsung,exynos4412"; + + aliases { + i2c8 = &i2c_ak8975; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + firmware@0204F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + cam_io_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 2 0>; + enable-active-high; + }; + + /* More to come */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-down { + interrupt-parent = <&gpj1>; + interrupts = <2 0>; + gpios = <&gpj1 2 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + interrupt-parent = <&gpj1>; + interrupts = <1 0>; + gpios = <&gpj1 1 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + interrupt-parent = <&gpx2>; + interrupts = <7 0>; + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; + }; + + i2c@138D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686_pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-mem-on; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-off; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-mem-off; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-off; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-mem-idle; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-mem-off; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-mem-idle; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-mem-idle; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-mem-idle; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-mem-idle; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-mem-off; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-mem-off; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-mem-off; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-mem-off; + }; + }; + }; + }; + + sdhci@12510000 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c_ak8975: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 0>, <&gpy2 5 0>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ak8975@0c { + compatible = "ak,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 0>; + }; + }; + + spi_1: spi@13930000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "okay"; + + s5c73m3_spi: s5c73m3 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + cs-gpio = <&gpb 5 0>; + samsung,spi-feedback-delay = <2>; + }; + }; + }; + + camera { + pinctrl-0 = <&cam_port_b_clk_active>; + pinctrl-names = "default"; + status = "okay"; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + + csis_1: csis@11890000 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <160000000>; + status = "okay"; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; + + fimc_lite_0: fimc-lite@12390000 { + status = "okay"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + status = "okay"; + }; + + fimc-is@12000000 { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&clock_cam 1>; + clock-names = "mclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 0>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 704290f..99b26df 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -401,13 +401,26 @@ samsung,pin-drv = <0>; }; - cam_port_a: cam-port-a { + cam_port_a_io: cam-port-a-io { samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", - "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3", - "gpj1-4"; + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; samsung,pin-function = <2>; - samsung,pin-pud = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; }; @@ -778,16 +791,29 @@ samsung,pin-drv = <3>; }; - cam_port_b: cam-port-b { + cam_port_b_io: cam-port-b-io { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", - "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1", - "gpm2-2"; + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + eint0: ext-int0 { samsung,pins = "gpx0-0"; samsung,pin-function = <0xf>; @@ -822,6 +848,27 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 3aa2f06..ad531fe 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -26,6 +26,13 @@ pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; }; clock: clock-controller@10030000 { @@ -73,4 +80,100 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; + }; + + fimc_3: fimc@11830000 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + }; + + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <0 105 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 353>; + clock-names = "flite"; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <0 106 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 354>; + clock-names = "flite"; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is", "simple-bus"; + reg = <0x12000000 0x260000>; + interrupts = <0 90 0>, <0 95 0>; + samsung,power-domain = <&pd_isp>; + clocks = <&clock 353>, <&clock 354>, <&clock 355>, + <&clock 356>, <&clock 17>, <&clock 357>, + <&clock 358>, <&clock 359>, <&clock 360>, + <&clock 450>,<&clock 451>, <&clock 452>, + <&clock 453>, <&clock 176>, <&clock 13>, + <&clock 454>, <&clock 395>, <&clock 455>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "mpll", "isp", + "drc", "fd", "mcuisp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "uart", "aclk200", + "div_aclk200", "aclk400mcuisp", + "div_aclk400mcuisp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&clock 370>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index f65e124..6afa57d 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -108,4 +108,23 @@ interrupts = <0 42 0>; status = "disabled"; }; + + fimd@14400000 { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + status = "disabled"; + }; + + dp-controller@145B0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145B0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index abc7272..452d0b0 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5250.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -37,6 +38,28 @@ s5m8767_pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; s5m8767,pmic-buck2-dvs-voltage = <1300000>; s5m8767,pmic-buck3-dvs-voltage = <1100000>; @@ -276,6 +299,16 @@ op_mode = <1>; }; + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + }; + buck9_reg: BUCK9 { regulator-name = "VDD_33_OFF_EXT1"; regulator-min-microvolt = <750000>; @@ -295,7 +328,22 @@ }; i2c@12C90000 { - status = "disabled"; + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 0>; + wlf,ldo2ena = <&gpb0 1 0>; + }; }; i2c@12CA0000 { @@ -429,18 +477,29 @@ vdd-supply = <&ldo8_reg>; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; - enable-active-high; - }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - reg_hdmi_en: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-en"; + main_dc_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 1>; + enable-active-high; + }; + + reg_hdmi_en: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + }; }; fixed-rate-clocks { @@ -450,16 +509,18 @@ }; }; - dp-controller { + dp-controller@145B0000 { samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + status = "okay"; }; fimd: fimd@14400000 { + status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -480,4 +541,22 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; + + usb@12110000 { + usb-phy = <&usb2_phy>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49f18c2..2538b32 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -250,7 +250,7 @@ samsung,vbus-gpio = <&gpx2 6 0>; }; - dp-controller { + dp-controller@145B0000 { samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; @@ -260,21 +260,25 @@ pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; + status = "okay"; }; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 1280x800 */ - clock-frequency = <50000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <4>; - hback-porch = <4>; - hsync-len = <4>; - vback-porch = <4>; - vfront-porch = <4>; - vsync-len = <4>; + fimd@14400000 { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f2dfa6b..f7e2d34 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -163,11 +163,21 @@ clock-names = "watchdog"; }; + g2d@10850000 { + compatible = "samsung,exynos5250-g2d"; + reg = <0x10850000 0x1000>; + interrupts = <0 91 0>; + clocks = <&clock 345>; + clock-names = "fimg2d"; + }; + codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 266>; + clock-names = "mfc"; }; rtc { @@ -611,28 +621,20 @@ interrupts = <0 94 0>; }; - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x1000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; + dp_phy: video-phy@10040720 { + compatible = "samsung,exynos5250-dp-video-phy"; + reg = <0x10040720 4>; + #phy-cells = <0>; + }; + + dp-controller@145B0000 { clocks = <&clock 342>; clock-names = "dp"; - #address-cells = <1>; - #size-cells = <0>; - - dptx-phy { - reg = <0x10040720>; - samsung,enable-mask = <1>; - }; + phys = <&dp_phy>; + phy-names = "dp"; }; - fimd { - compatible = "samsung,exynos5250-fimd"; - interrupt-parent = <&combiner>; - reg = <0x14400000 0x40000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <18 4>, <18 5>, <18 6>; + fimd@14400000 { clocks = <&clock 133>, <&clock 339>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 5848c42..e695aba 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -59,6 +59,13 @@ interrupt-controller; #interrupt-cells = <2>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13410000 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08607df..bafba25 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -30,4 +30,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller@145B0000 { + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + status = "okay"; + }; + + fimd@14400000 { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 9e90d1e..5353e32 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -14,7 +14,10 @@ */ #include "exynos5.dtsi" -/include/ "exynos5420-pinctrl.dtsi" +#include "exynos5420-pinctrl.dtsi" + +#include <dt-bindings/clk/exynos-audss-clk.h> + / { compatible = "samsung,exynos5420"; @@ -65,6 +68,22 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5420-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock 148>; + clock-names = "sclk_audio"; + }; + + codec@11000000 { + compatible = "samsung,mfc-v7"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + clocks = <&clock 401>; + clock-names = "mfc"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -90,6 +109,41 @@ }; }; + gsc_pd: power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + }; + + isp_pd: power-domain@10044020 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044020 0x20>; + }; + + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + }; + + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + }; + + mau_pd: power-domain@100440E0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440E0 0x20>; + }; + + g2d_pd: power-domain@10044100 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044100 0x20>; + }; + + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + }; + pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; @@ -145,4 +199,23 @@ clocks = <&clock 260>, <&clock 131>; clock-names = "uart", "clk_uart_baud0"; }; + + dp_phy: video-phy@10040728 { + compatible = "samsung,exynos5250-dp-video-phy"; + reg = <0x10040728 4>; + #phy-cells = <0>; + }; + + dp-controller@145B0000 { + clocks = <&clock 412>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; + }; + + fimd@14400000 { + samsung,power-domain = <&disp_pd>; + clocks = <&clock 147>, <&clock 421>; + clock-names = "sclk_fimd", "fimd"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 1b81f36..5d6cf49 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -18,6 +18,9 @@ aliases { spi0 = &spi_0; + tmuctrl0 = &tmuctrl_0; + tmuctrl1 = &tmuctrl_1; + tmuctrl2 = &tmuctrl_2; }; clock: clock-controller@160000 { @@ -207,6 +210,30 @@ clock-names = "rtc"; }; + tmuctrl_0: tmuctrl@160118 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160118 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + + tmuctrl_1: tmuctrl@16011C { + compatible = "samsung,exynos5440-tmu"; + reg = <0x16011C 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + + tmuctrl_2: tmuctrl@160120 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160120 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + sata@210000 { compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index da0588a..185c7c01 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -90,6 +90,11 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; + pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm2_pins_a>; @@ -107,6 +112,16 @@ pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index d107c4a..fc766ae 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -69,6 +69,10 @@ }; apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 587ceef..28b5ce2 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -20,6 +20,8 @@ gpio2 = &gpio2; serial0 = &auart0; serial1 = &auart1; + spi0 = &ssp0; + spi1 = &ssp1; }; cpus { @@ -76,23 +78,21 @@ #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <13>, <56>; - interrupt-names = "gpmi-dma", "bch"; + interrupts = <56>; + interrupt-names = "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; - fsl,gpmi-dma-channel = <4>; status = "disabled"; }; ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; - interrupts = <15 14>; + interrupts = <15>; clocks = <&clks 33>; dmas = <&dma_apbh 1>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -366,11 +366,10 @@ ssp1: ssp@80034000 { reg = <0x80034000 0x2000>; - interrupts = <2 20>; + interrupts = <2>; clocks = <&clks 33>; dmas = <&dma_apbh 2>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -472,7 +471,7 @@ auart0: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; + interrupts = <24>; clocks = <&clks 32>; dmas = <&dma_apbx 6>, <&dma_apbx 7>; dma-names = "rx", "tx"; @@ -482,7 +481,7 @@ auart1: serial@8006e000 { compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; - interrupts = <59 60 58>; + interrupts = <59>; clocks = <&clks 32>; dmas = <&dma_apbx 8>, <&dma_apbx 9>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 94c4476..1ec8c94 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -23,10 +23,7 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_cfa10036>; - - hog_pins_cfa10036: hog-10036@0 { + ssd1306_cfa10036: ssd1306-10036@0 { reg = <0>; fsl,pinmux-ids = < 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ @@ -83,6 +80,8 @@ ssd1306: oled@3c { compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; reset-gpios = <&gpio2 7 0>; solomon,height = <32>; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index c2ef3a3..182b99f 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -22,13 +22,19 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10037>; - - hog_pins_cfa10037: hog-10037@0 { + usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_cfa10037: mac0-10037@0 { + reg = <0>; + fsl,pinmux-ids = < 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ >; fsl,drive-strength = <0>; @@ -56,7 +62,8 @@ mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10037>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; @@ -68,6 +75,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10037>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 04b2f76..06e4cfa 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -22,32 +22,62 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10049 - &hog_pins_cfa10049_pullup>; - - hog_pins_cfa10049: hog-10049@0 { + usb_pins_cfa10049: usb-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - hog_pins_cfa10049_pullup: hog-10049-pullup@0 { + pca_pins_cfa10049: pca-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -60,6 +90,7 @@ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -120,6 +151,16 @@ fsl,pull-up = <0>; }; + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + w1_gpio_pins: w1-gpio@0 { reg = <0>; fsl,pinmux-ids = < @@ -134,7 +175,8 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049>; + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; display = <&display>; status = "okay"; @@ -181,6 +223,8 @@ compatible = "i2c-mux-gpio"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2cmux_pins_cfa10049>; mux-gpios = <&gpio1 22 0 &gpio1 23 0>; i2c-parent = <&i2c1>; @@ -203,6 +247,8 @@ pca9555: pca9555@20 { compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca_pins_cfa10049>; interrupt-parent = <&gpio2>; interrupts = <19 0x2>; gpio-controller; @@ -239,6 +285,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10049>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -250,7 +298,8 @@ mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; @@ -320,6 +369,8 @@ gpio_keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&rotary_btn_pins_cfa10049>; #address-cells = <1>; #size-cells = <0>; @@ -333,6 +384,8 @@ rotary { compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&rotary_pins_cfa10049>; gpios = <&gpio3 24 1>, <&gpio3 25 1>; linux,axis = <1>; /* REL_Y */ rotary-encoder,relative-axis; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 1581112..171bcbe 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -23,36 +23,13 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10055 - &hog_pins_cfa10055_pullup>; - - hog_pins_cfa10055: hog-10055@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - hog_pins_cfa10055_pullup: hog-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; - }; - spi2_pins_cfa10055: spi2-cfa10055@0 { reg = <0>; fsl,pinmux-ids = < 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -98,12 +75,23 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055>; + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; display = <&display>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts new file mode 100644 index 0000000..b45dd0e --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10055 is an expansion board for the CFA-10036 module and + * CFA-10037, thus we need to include the CFA-10037 DTS. + */ +/include/ "imx28-cfa10037.dts" + +/ { + model = "Crystalfontz CFA-10056 Board"; + compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10056>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 5 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8369: hx8369@0 { + compatible = "himax,hx8369a", "himax,hx8369"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2da713cd..0333c05 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -23,35 +23,16 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10057 - &hog_pins_cfa10057_pullup>; - - hog_pins_cfa10057: hog-10057@0 { + usb_pins_cfa10057: usb-10057@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - hog_pins_cfa10057_pullup: hog-10057-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ - 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ - 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ - 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; - }; - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -164,6 +145,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10057>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts new file mode 100644 index 0000000..64c64c5 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -0,0 +1,141 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2013 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10058 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10058 Board"; + compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10058>; + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 44d9da5..0d322a2 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -235,6 +235,12 @@ pinctrl-0 = <&auart2_2pins_b>; status = "okay"; }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; + }; }; }; @@ -270,6 +276,13 @@ }; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + regulators { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 9524a05..7363fde 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -15,6 +15,8 @@ interrupt-parent = <&icoll>; aliases { + ethernet0 = &mac0; + ethernet1 = &mac1; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; @@ -27,8 +29,8 @@ serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; - ethernet0 = &mac0; - ethernet1 = &mac1; + spi0 = &ssp1; + spi1 = &ssp2; }; cpus { @@ -62,9 +64,9 @@ reg = <0x80000000 0x2000>; }; - hsadc@80002000 { + hsadc: hsadc@80002000 { reg = <0x80002000 0x2000>; - interrupts = <13 87>; + interrupts = <13>; dmas = <&dma_apbh 12>; dma-names = "rx"; status = "disabled"; @@ -86,25 +88,24 @@ clocks = <&clks 25>; }; - perfmon@80006000 { + perfmon: perfmon@80006000 { reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; - gpmi-nand@8000c000 { + gpmi: gpmi-nand@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <88>, <41>; - interrupt-names = "gpmi-dma", "bch"; + interrupts = <41>; + interrupt-names = "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; - fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -112,11 +113,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; - interrupts = <96 82>; + interrupts = <96>; clocks = <&clks 46>; dmas = <&dma_apbh 0>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -124,11 +124,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; - interrupts = <97 83>; + interrupts = <97>; clocks = <&clks 47>; dmas = <&dma_apbh 1>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -136,11 +135,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; - interrupts = <98 84>; + interrupts = <98>; clocks = <&clks 48>; dmas = <&dma_apbh 2>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -148,15 +146,14 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; - interrupts = <99 85>; + interrupts = <99>; clocks = <&clks 49>; dmas = <&dma_apbh 3>; dma-names = "rx-tx"; - fsl,ssp-dma-channel = <3>; status = "disabled"; }; - pinctrl@80018000 { + pinctrl: pinctrl@80018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; @@ -521,6 +518,18 @@ fsl,pull-up = <1>; }; + saif0_pins_b: saif0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < @@ -639,6 +648,19 @@ fsl,pull-up = <0>; }; + lcdif_sync_pins_a: lcdif-sync@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < @@ -674,6 +696,21 @@ fsl,pull-up = <1>; }; + spi3_pins_a: spi3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */ + 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */ + 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */ + 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */ + 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */ + 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + usbphy0_pins_a: usbphy0@0 { reg = <0>; fsl,pinmux-ids = < @@ -705,14 +742,14 @@ }; }; - digctl@8001c000 { + digctl: digctl@8001c000 { compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; - etm@80022000 { + etm: etm@80022000 { reg = <0x80022000 0x2000>; status = "disabled"; }; @@ -733,19 +770,19 @@ clocks = <&clks 26>; }; - dcp@80028000 { + dcp: dcp@80028000 { reg = <0x80028000 0x2000>; interrupts = <52 53 54>; compatible = "fsl-dcp"; }; - pxp@8002a000 { + pxp: pxp@8002a000 { reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; - ocotp@8002c000 { + ocotp: ocotp@8002c000 { compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; @@ -756,10 +793,10 @@ status = "disabled"; }; - lcdif@80030000 { + lcdif: lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; - interrupts = <38 86>; + interrupts = <38>; clocks = <&clks 55>; dmas = <&dma_apbh 13>; dma-names = "rx"; @@ -784,41 +821,41 @@ status = "disabled"; }; - simdbg@8003c000 { + simdbg: simdbg@8003c000 { reg = <0x8003c000 0x200>; status = "disabled"; }; - simgpmisel@8003c200 { + simgpmisel: simgpmisel@8003c200 { reg = <0x8003c200 0x100>; status = "disabled"; }; - simsspsel@8003c300 { + simsspsel: simsspsel@8003c300 { reg = <0x8003c300 0x100>; status = "disabled"; }; - simmemsel@8003c400 { + simmemsel: simmemsel@8003c400 { reg = <0x8003c400 0x100>; status = "disabled"; }; - gpiomon@8003c500 { + gpiomon: gpiomon@8003c500 { reg = <0x8003c500 0x100>; status = "disabled"; }; - simenet@8003c700 { + simenet: simenet@8003c700 { reg = <0x8003c700 0x100>; status = "disabled"; }; - armjtag@8003c800 { + armjtag: armjtag@8003c800 { reg = <0x8003c800 0x100>; status = "disabled"; }; - }; + }; apbx@80040000 { compatible = "simple-bus"; @@ -836,16 +873,15 @@ saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; - interrupts = <59 80>; + interrupts = <59>; #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; - fsl,saif-dma-channel = <4>; status = "disabled"; }; - power@80044000 { + power: power@80044000 { reg = <0x80044000 0x2000>; status = "disabled"; }; @@ -853,15 +889,14 @@ saif1: saif@80046000 { compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; - interrupts = <58 81>; + interrupts = <58>; clocks = <&clks 54>; dmas = <&dma_apbx 5>; dma-names = "rx-tx"; - fsl,saif-dma-channel = <5>; status = "disabled"; }; - lradc@80050000 { + lradc: lradc@80050000 { compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; interrupts = <10 14 15 16 17 18 19 @@ -869,15 +904,15 @@ status = "disabled"; }; - spdif@80054000 { + spdif: spdif@80054000 { reg = <0x80054000 0x2000>; - interrupts = <45 66>; + interrupts = <45>; dmas = <&dma_apbx 2>; dma-names = "tx"; status = "disabled"; }; - rtc@80056000 { + mxs_rtc: rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 0x2000>; interrupts = <29>; @@ -888,11 +923,10 @@ #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 0x2000>; - interrupts = <111 68>; + interrupts = <111>; clock-frequency = <100000>; dmas = <&dma_apbx 6>; dma-names = "rx-tx"; - fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -901,11 +935,10 @@ #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x8005a000 0x2000>; - interrupts = <110 69>; + interrupts = <110>; clock-frequency = <100000>; dmas = <&dma_apbx 7>; dma-names = "rx-tx"; - fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -918,7 +951,7 @@ status = "disabled"; }; - timrot@80068000 { + timer: timrot@80068000 { compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; @@ -928,10 +961,9 @@ auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; + interrupts = <112>; dmas = <&dma_apbx 8>, <&dma_apbx 9>; dma-names = "rx", "tx"; - fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; @@ -939,7 +971,7 @@ auart1: serial@8006c000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; - interrupts = <113 72 73>; + interrupts = <113>; dmas = <&dma_apbx 10>, <&dma_apbx 11>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -949,7 +981,7 @@ auart2: serial@8006e000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; - interrupts = <114 74 75>; + interrupts = <114>; dmas = <&dma_apbx 12>, <&dma_apbx 13>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -959,7 +991,7 @@ auart3: serial@80070000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; - interrupts = <115 76 77>; + interrupts = <115>; dmas = <&dma_apbx 14>, <&dma_apbx 15>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -969,7 +1001,7 @@ auart4: serial@80072000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; - interrupts = <116 78 79>; + interrupts = <116>; dmas = <&dma_apbx 0>, <&dma_apbx 1>; dma-names = "rx", "tx"; clocks = <&clks 45>; @@ -1026,7 +1058,7 @@ status = "disabled"; }; - dflpt@800c0000 { + dflpt: dflpt@800c0000 { reg = <0x800c0000 0x10000>; status = "disabled"; }; @@ -1049,10 +1081,9 @@ status = "disabled"; }; - switch@800f8000 { + etn_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; - }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index f9d92da..83bb0ef 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -28,5 +28,16 @@ marvell,intc-priority; marvell,intc-nr-irqs = <56>; }; + + gpio: gpio@40e00000 { + compatible = "intel,pxa3xx-gpio"; + reg = <0x40e00000 0x10000>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; + interrupts = <8 9 10>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f603c69..e657a9d 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -50,3 +50,25 @@ }; }; }; + +&i2c5 { + vdd_dvfs: max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1950000 1115000 + 1462500 995000 + >; + voltage-tolerance = <1>; /* 1% */ +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019..6c26caa 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -85,4 +85,137 @@ interrupt-parent = <&gic>; interrupts = <0 69 4>; }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 174 0x4>; + }; + + i2c1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 175 0x4>; + }; + + i2c2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 176 0x4>; + }; + + i2c3: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6530000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 177 0x4>; + }; + + i2c4: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6540000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 178 0x4>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 179 0x4>; + }; + + i2c6: i2c@e6550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6550000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 184 0x4>; + }; + + i2c7: i2c@e6560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6560000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 185 0x4>; + }; + + i2c8: i2c@e6570000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6570000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 173 0x4>; + }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a73a4"; + reg = <0 0xe6050000 0 0x9000>; + gpio-controller; + #gpio-cells = <2>; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 09ea22c..366f729 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -10,6 +10,7 @@ /dts-v1/; /include/ "r8a7740.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "armadillo 800 eva reference"; @@ -33,6 +34,21 @@ regulator-boot-on; }; + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; + }; + led2 { + gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; + }; + }; }; &i2c0 { @@ -41,5 +57,23 @@ reg = <0x55>; interrupt-parent = <&irqpin1>; interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + pinctrl-0 = <&st1232_pins>; + pinctrl-names = "default"; + gpios = <&pfc 166 GPIO_ACTIVE_LOW>; + }; +}; + +&pfc { + pinctrl-0 = <&scifa1_pins>; + pinctrl-names = "default"; + + scifa1_pins: scifa1 { + renesas,groups = "scifa1_data"; + renesas,function = "scifa1"; + }; + + st1232_pins: st1232 { + renesas,groups = "intc_irq10"; + renesas,function = "intc"; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 24e9306..e18a195 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -139,4 +139,12 @@ 0 72 0x4 0 73 0x4>; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a7740"; + reg = <0xe6050000 0x8000>, + <0xe605800c 0x20>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4743735..45ac404 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -32,4 +32,70 @@ reg = <0xfe438000 0x1000>, <0xfe430000 0x100>; }; + + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc40000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc41000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc42000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc43000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + reg = <0xffc44000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 103 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 27>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pfc: pfc@fffc0000 { + compatible = "renesas,pfc-r8a7778"; + reg = <0xfffc000 0x118>; + #gpio-range-cells = <3>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 72be4c8..b64705b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; /include/ "r8a7779.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "marzen"; @@ -37,6 +38,9 @@ lan0@18000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + phy-mode = "mii"; interrupt-parent = <&gic>; interrupts = <0 28 0x4>; @@ -44,4 +48,49 @@ vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pfc { + pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; + pinctrl-names = "default"; + + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: scif2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: scif4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", + "sdhi0_wp"; + renesas,function = "sdhi0"; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 7f146c6..e9fbe3d 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -48,6 +48,90 @@ <0xf0000100 0x100>; }; + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc40000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 141 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc41000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 142 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc42000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 143 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc43000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 144 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc44000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 145 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@ffc45000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc45000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio6: gpio@ffc46000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc46000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 147 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 9>; + #interrupt-cells = <2>; + interrupt-controller; + }; + irqpin0: irqpin@fe780010 { compatible = "renesas,intc-irqpin"; #interrupt-cells = <2>; @@ -101,6 +185,12 @@ interrupts = <0 81 0x4>; }; + pfc: pfc@fffc0000 { + compatible = "renesas,pfc-r8a7779"; + reg = <0xfffc0000 0x23c>; + #gpio-range-cells = <3>; + }; + thermal@ffc48000 { compatible = "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 339d9b1..3b879e7 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -38,6 +38,78 @@ interrupts = <1 9 0xf04>; }; + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc40000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 4 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc41000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 5 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc42000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 6 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc43000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 7 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc44000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 8 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@ffc45000 { + compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + reg = <0 0xffc45000 0 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, @@ -54,4 +126,64 @@ interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7790"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi3: sdhi@ee160000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 168 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a1d5e25..ff63fbb 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -48,6 +48,11 @@ }; }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; + }; + memory { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi index 7bf020e..249f65be2 100644 --- a/arch/arm/boot/dts/sh7372.dtsi +++ b/arch/arm/boot/dts/sh7372.dtsi @@ -23,4 +23,12 @@ reg = <0x0>; }; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-sh7372"; + reg = <0xe6050000 0x8000>, + <0xe605801c 0x1c>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index b6f759e..b99e890 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sh73a0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "KZM-A9-GT"; @@ -58,6 +59,24 @@ regulator-boot-on; }; + vmmc_sdhi0: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vmmc_sdhi2: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + lan9220@10000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x10000000 0x100>; @@ -70,6 +89,22 @@ vddvario-supply = <®_1p8v>; vdd33a-supply = <®_3p3v>; }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + }; + led2 { + gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + }; + led3 { + gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + }; + led4 { + gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + }; + }; }; &i2c0 { @@ -145,20 +180,71 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; +}; + &mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + bus-width = <8>; vmmc-supply = <®_1p8v>; status = "okay"; }; +&pfc { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + i2c3_pins: i2c3 { + renesas,groups = "i2c3_1"; + renesas,function = "i2c3"; + }; + + mmcif_pins: mmcif { + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; + }; + + scifa4_pins: scifa4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sdhi2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; +}; + &sdhi0 { - vmmc-supply = <®_3p3v>; + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi0>; bus-width = <4>; status = "okay"; }; &sdhi2 { - vmmc-supply = <®_3p3v>; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi2>; bus-width = <4>; broken-cd; status = "okay"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b977502..86e79fe 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -222,4 +222,12 @@ cap-sd-highspeed; status = "disabled"; }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-sh73a0"; + reg = <0xe6050000 0x8000>, + <0xe605801c 0x1c>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index bee62a2..e273fa9 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -476,25 +476,25 @@ }; timer0: timer0@ffc08000 { - compatible = "snps,dw-apb-timer-sp"; + compatible = "snps,dw-apb-timer"; interrupts = <0 167 4>; reg = <0xffc08000 0x1000>; }; timer1: timer1@ffc09000 { - compatible = "snps,dw-apb-timer-sp"; + compatible = "snps,dw-apb-timer"; interrupts = <0 168 4>; reg = <0xffc09000 0x1000>; }; timer2: timer2@ffd00000 { - compatible = "snps,dw-apb-timer-osc"; + compatible = "snps,dw-apb-timer"; interrupts = <0 169 4>; reg = <0xffd00000 0x1000>; }; timer3: timer3@ffd01000 { - compatible = "snps,dw-apb-timer-osc"; + compatible = "snps,dw-apb-timer"; interrupts = <0 170 4>; reg = <0xffd01000 0x1000>; }; diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi new file mode 100644 index 0000000..e079996 --- /dev/null +++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi @@ -0,0 +1,196 @@ +/* + * Copyright 2012 ST-Ericsson + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include "ste-nomadik-pinctrl.dtsi" + +/ { + soc { + pinctrl { + uart0 { + uart0_default_mux: uart0_mux { + default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + }; + + uart0_default_mode: uart0_default { + default_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO1", "GPIO3"; + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,config = <&slpm_in_pu>; + }; + + sleep_cfg2 { + ste,pins = "GPIO1", "GPIO3"; + ste,config = <&slpm_out_hi>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + ste,function = "u2"; + ste,pins = "u2txrx_a_1"; + }; + + default_cfg1 { + ste,pins = "GPIO120"; + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO121"; + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + ste,pins = "GPIO120"; + ste,config = <&slpm_in_pu>; + }; + + sleep_cfg2 { + ste,pins = "GPIO121"; + ste,config = <&slpm_out_hi>; + }; + }; + }; + + i2c0 { + i2c0_default_mux: i2c_mux { + default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + }; + + i2c0_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO147", "GPIO148"; + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO147", "GPIO148"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c1 { + i2c1_default_mux: i2c_mux { + default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_b_2"; + }; + }; + + i2c1_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO16", "GPIO17"; + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO16", "GPIO17"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c2 { + i2c2_default_mux: i2c_mux { + default_mux { + ste,function = "i2c2"; + ste,pins = "i2c2_b_2"; + }; + }; + + i2c2_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO10", "GPIO11"; + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO11", "GPIO11"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c4 { + i2c4_default_mux: i2c_mux { + default_mux { + ste,function = "i2c4"; + ste,pins = "i2c4_b_2"; + }; + }; + + i2c4_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO122", "GPIO123"; + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO122", "GPIO123"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + + i2c5 { + i2c5_default_mux: i2c_mux { + default_mux { + ste,function = "i2c5"; + ste,pins = "i2c5_c_2"; + }; + }; + + i2c5_default_mode: i2c_default { + default_cfg1 { + ste,pins = "GPIO118", "GPIO119"; + ste,config = <&in_pu>; + }; + }; + + i2c5_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO118", "GPIO119"; + ste,config = <&slpm_in_pu>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts new file mode 100644 index 0000000..7f3baf5 --- /dev/null +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2013 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-dbx5x0.dtsi" +#include "ste-ccu8540-pinctrl.dtsi" + +/ { + model = "ST-Ericsson U8540 platform with Device Tree"; + compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + + memory@0 { + reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; + }; + + soc { + pinctrl { + compatible = "stericsson,db8540-pinctrl"; + }; + + prcmu@80157000 { + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; + }; + + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; + status = "okay"; + }; + + i2c0: i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c1: i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + + i2c2: i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; + }; + + i2c3: i2c@80110000 { + status = "disabled"; + }; + + i2c4: i2c@8012a000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>; + pinctrl-1 = <&i2c4_sleep_mode>; + }; + + i2c5: i2c@80001000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>; + pinctrl-1 = <&i2c5_sleep_mode>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index ed29ec7..2295087 100644 --- a/arch/arm/boot/dts/ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { model = "ST-Ericsson CCU9540 platform with Device Tree"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a152945..1c1091e 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -245,7 +245,7 @@ <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; status = "disabled"; - }; + }; db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -457,8 +457,36 @@ stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; + ext_regulators: ab8500-ext-regulators { + compatible = "stericsson,ab8500-ext-regulator"; + + ab8500_ext1_reg: ab8500_ext1 { + regulator-compatible = "ab8500_ext1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext2_reg: ab8500_ext2 { + regulator-compatible = "ab8500_ext2"; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext3_reg: ab8500_ext3 { + regulator-compatible = "ab8500_ext3"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; + vin-supply = <&ab8500_ext3_reg>; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 9db41b9..370e03f 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -10,7 +10,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { memory { diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dts index c6bb07d..d8d3b99 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/ste-hrefprev60.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" -#include "href.dtsi" -#include "stuib.dtsi" +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" +#include "ste-stuib.dtsi" / { model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts index 3d580d6..6e52ebb 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus.dts @@ -10,9 +10,9 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" -#include "href.dtsi" -#include "stuib.dtsi" +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" +#include "ste-stuib.dtsi" / { model = "ST-Ericsson HREF (v60+) platform with Device Tree"; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi new file mode 100644 index 0000000..efddee9 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -0,0 +1,95 @@ +/* + * Copyright 2012 ST-Ericsson + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <dt-bindings/pinctrl/nomadik.h> + +/ { + in_nopull: in_nopull { + ste,input = <INPUT_NOPULL>; + }; + + in_pu: input_pull_up { + ste,input = <INPUT_PULLUP>; + }; + + in_pd: input_pull_down { + ste,input = <INPUT_PULLDOWN>; + }; + + out_hi: output_high { + ste,output = <OUTPUT_HIGH>; + }; + + out_lo: output_low { + ste,output = <OUTPUT_LOW>; + }; + + gpio_out_lo: gpio_output_low { + ste,gpio = <GPIOMODE_ENABLED>; + ste,output = <OUTPUT_LOW>; + }; + + slpm_in_pu: slpm_in_pu { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_INPUT_PULLUP>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + }; + + slpm_in_wkup_pdis: slpm_in_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_out_lo: slpm_out_lo { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + }; + + slpm_out_hi: slpm_out_hi { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_HIGH>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + }; + + slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_HIGH>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_out_wkup_pdis: slpm_out_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_DIR_OUTPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + in_wkup_pdis: in_wkup_pdis { + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + out_hi_wkup_pdis: out_hi_wkup_pdis { + ste,sleep-output = <SLPM_OUTPUT_HIGH>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + out_wkup_pdis: out_wkup_pdis { + ste,sleep-output = <SLPM_DIR_OUTPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index a3acfa7..9169d30 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -140,18 +140,30 @@ }; }; i2c0 { + i2c0_default_mux: i2c0_mux { + i2c0_default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + }; i2c0_default_mode: i2c0_default { i2c0_default_cfg { ste,pins = "GPIO62_D3", "GPIO63_D2"; - ste,input = <1>; + ste,input = <0>; }; }; }; i2c1 { + i2c1_default_mux: i2c1_mux { + i2c1_default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_a_1"; + }; + }; i2c1_default_mode: i2c1_default { i2c1_default_cfg { ste,pins = "GPIO53_L4", "GPIO54_L3"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -159,7 +171,7 @@ i2c2_default_mode: i2c2_default { i2c2_default_cfg { ste,pins = "GPIO73_C21", "GPIO74_C20"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -682,13 +694,17 @@ /* I2C0 connected to the STw4811 power management chip */ i2c0 { - compatible = "i2c-gpio"; - gpios = <&gpio1 31 0>, /* sda */ - <&gpio1 30 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <20>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c0clk>, <&pclki2c0>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c0_default_mode>; + pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; stw4811@2d { compatible = "st,stw4811"; @@ -698,13 +714,17 @@ /* I2C1 connected to various sensors */ i2c1 { - compatible = "i2c-gpio"; - gpios = <&gpio1 22 0>, /* sda */ - <&gpio1 21 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f7000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <21>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c1clk>, <&pclki2c1>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c1_default_mode>; + pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; camera@2d { compatible = "st,camera"; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 49824be..f1fc128 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "dbx5x0.dtsi" +#include "ste-dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -165,34 +165,6 @@ status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - //compatible = "tc3589x"; - reg = <0x42>; - gpios = <&gpio6 25 0x4>; - interrupt-parent = <&gpio6>; - }; - tps61052@33 { - //compatible = "tps61052"; - reg = <0x33>; - }; - }; - - i2c@80128000 { - lp5521@33 { - // compatible = "lp5521"; - reg = <0x33>; - }; - lp5521@34 { - // compatible = "lp5521"; - reg = <0x34>; - }; - bh1780@29 { - // compatible = "rohm,bh1780gli"; - reg = <0x33>; - }; - }; - cpufreq-cooling { status = "okay"; }; @@ -310,6 +282,20 @@ compatible = "stericsson,ab8500-gpio"; }; + ext_regulators: ab8500-ext-regulators { + ab8500_ext1_reg: ab8500_ext1 { + regulator-name = "ab8500-ext-supply1"; + }; + + ab8500_ext2_reg_reg: ab8500_ext2 { + regulator-name = "ab8500-ext-supply2"; + }; + + ab8500_ext3_reg_reg: ab8500_ext3 { + regulator-name = "ab8500-ext-supply3"; + }; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/ste-stuib.dtsi index 524e332..524e332 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/ste-stuib.dtsi diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts new file mode 100644 index 0000000..eb4d73b --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -0,0 +1,101 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "Mele A1000"; + compatible = "mele,a1000", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + soc@01c00000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + pinctrl@01c20800 { + emac_power_pin_a1000: emac_power_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_a1000: led_pins@0 { + allwinner,pins = "PH10", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a1000>; + + red { + label = "a1000:red:usr"; + gpios = <&pio 7 10 0>; + }; + + blue { + label = "a1000:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_a1000>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 15 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 757c4cd..425a7db 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -26,7 +26,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -76,12 +76,12 @@ pinctrl-0 = <&led_pins_cubieboard>; blue { - label = "cubieboard::blue"; + label = "cubieboard:blue:usr"; gpios = <&pio 7 21 0>; /* LED1 */ }; green { - label = "cubieboard::green"; + label = "cubieboard:green:usr"; gpios = <&pio 7 20 0>; /* LED2 */ linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 3514b37..b3ae51f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 078ed7f..0c1447c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b2bd6e1..c32770a 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -160,11 +160,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; emac: ethernet@01c0b000 { diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 64dc0c4..3c9f8b3 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -18,7 +18,7 @@ model = "Olimex A10s-Olinuxino Micro"; compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; - soc@01c20000 { + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -60,6 +60,31 @@ pinctrl-0 = <&uart3_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + at24@50 { + compatible = "at,24c16"; + pagesize = <16>; + reg = <0x50>; + read-only; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2307ce8..ee0ff9b 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -157,11 +157,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; emac: ethernet@01c0b000 { @@ -229,6 +228,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -282,5 +302,38 @@ clocks = <&apb1_gates 19>; status = "disabled"; }; + + i2c0: i2c@01c2ac00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 80497e3..9e508dc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -22,7 +22,7 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c20000 { + soc@01c00000 { pinctrl@01c20800 { led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 7363211..f6091dc 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -150,11 +150,10 @@ }; }; - soc@01c20000 { + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x01c20000 0x300000>; ranges; intc: interrupt-controller@01c20400 { diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts new file mode 100644 index 0000000..99c4b18 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" + +/ { + model = "WITS A31 Colombus Evaluation Board"; + compatible = "wits,colombus", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + uart0: serial@01c28000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi new file mode 100644 index 0000000..4d076ec --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -0,0 +1,156 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <0 18 1>, + <0 19 1>, + <0 20 1>, + <0 21 1>, + <0 22 1>; + clocks = <&osc>; + }; + + wdt1: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-wdt"; + reg = <0x01c20ca0 0x20>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 0 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 1 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 2 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 3 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 4 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 5 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts new file mode 100644 index 0000000..d339584 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" + +/ { + model = "Olimex A20-Olinuxino Micro"; + compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; + + soc@01c00000 { + uart0: serial@01c28000 { + status = "okay"; + }; + + uart6: serial@01c29800 { + status = "okay"; + }; + + uart7: serial@01c29c00 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi new file mode 100644 index 0000000..3339151 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -0,0 +1,172 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <0 22 1>, + <0 23 1>, + <0 24 1>, + <0 25 1>, + <0 67 1>, + <0 68 1>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 1 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 2 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 3 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 4 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 17 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 18 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <0 19 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <0 20 1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index cb640eb..6023028 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -791,7 +791,7 @@ regulator-boot-on; }; - dcdc3 { + tps65090_dcdc3_reg: dcdc3 { regulator-name = "vdd-ao"; regulator-always-on; regulator-boot-on; @@ -836,6 +836,182 @@ }; }; }; + + palmas: tps65913 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + smps1-in-supply = <&tps65090_dcdc3_reg>; + smps3-in-supply = <&tps65090_dcdc3_reg>; + smps4-in-supply = <&tps65090_dcdc2_reg>; + smps7-in-supply = <&tps65090_dcdc2_reg>; + smps8-in-supply = <&tps65090_dcdc2_reg>; + smps9-in-supply = <&tps65090_dcdc2_reg>; + ldo1-in-supply = <&tps65090_dcdc2_reg>; + ldo2-in-supply = <&tps65090_dcdc2_reg>; + ldo3-in-supply = <&palmas_smps3_reg>; + ldo4-in-supply = <&tps65090_dcdc2_reg>; + ldo5-in-supply = <&vdd_ac_bat_reg>; + ldo6-in-supply = <&tps65090_dcdc2_reg>; + ldo7-in-supply = <&tps65090_dcdc2_reg>; + ldo8-in-supply = <&tps65090_dcdc3_reg>; + ldo9-in-supply = <&palmas_smps9_reg>; + ldoln-in-supply = <&tps65090_dcdc1_reg>; + ldousb-in-supply = <&tps65090_dcdc1_reg>; + + regulators { + smps12 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas_smps3_reg: smps3 { + regulator-name = "vddio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps457 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8 { + regulator-name = "avdd-pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas_smps9_reg: smps9 { + regulator-name = "sdhci-vdd-sd-slot"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo1 { + regulator-name = "avdd-cam1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo2 { + regulator-name = "avdd-cam2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo3 { + regulator-name = "avdd-dsi-csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-name = "vdd-sensor-2v85"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "vdd-af-cam1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo8 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + ldo9 { + regulator-name = "vddio-sdmmc-2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "hvdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen1 { + regulator-name = "rail-3v3"; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen2 { + regulator-name = "rail-5v0"; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + }; }; spi@7000da00 { @@ -850,6 +1026,13 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; ahub { @@ -870,6 +1053,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usb3_vbus_reg>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -883,6 +1075,35 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + linux,code = <102>; /* KEY_HOME */ + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -951,6 +1172,16 @@ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; + + vdd_cam_1v8_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&palmas_gpio 6 0>; + }; }; sound { @@ -964,7 +1195,9 @@ "Speakers", "SPORP", "Speakers", "SPORN", "Speakers", "SPOLP", - "Speakers", "SPOLN"; + "Speakers", "SPOLN", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5640>; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts deleted file mode 100644 index d5f8d3e..0000000 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ /dev/null @@ -1,33 +0,0 @@ -/dts-v1/; - -#include "tegra114.dtsi" - -/ { - model = "NVIDIA Tegra114 Pluto evaluation board"; - compatible = "nvidia,pluto", "nvidia,tegra114"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - serial@70006300 { - status = "okay"; - }; - - pmc { - nvidia,invert-interrupt; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -}; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index abf6c40d..2905145 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -430,6 +430,68 @@ status = "disable"; }; + usb@7d000000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USBD>; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USBD>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USB3>; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USB3>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 5592be6..d5c9bca 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -363,7 +363,7 @@ }; pmc { - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d9f89cd..e156ab3 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -335,7 +335,7 @@ regulator-always-on; }; - ldo0 { + pci_clk_reg: ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -417,7 +417,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -425,6 +425,20 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + usb@c5000000 { status = "okay"; }; @@ -643,7 +657,7 @@ enable-active-high; }; - regulator@3 { + pci_vdd_reg: regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "vdd_1v05"; @@ -651,8 +665,6 @@ regulator-max-microvolt = <1050000>; gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; enable-active-high; - /* Hack until board-harmony-pcie.c is removed */ - status = "disabled"; }; regulator@4 { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index cfd1276..8d71fc9 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -417,7 +417,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <0>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index c824253..315aae2 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -518,7 +518,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -828,7 +828,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 24 0>; /* PD0 */ + gpio = <&gpio TEGRA_GPIO(D, 0) 0>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index c54faae..7726dab 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -366,7 +366,7 @@ regulator-always-on; }; - ldo0 { + pci_clk_reg: ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -459,7 +459,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -467,6 +467,11 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + }; + usb@c5008000 { status = "okay"; }; @@ -509,5 +514,15 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + pci_vdd_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; + }; }; }; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index c572c43..3ada3cb 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -32,6 +32,14 @@ }; }; + pcie-controller { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + }; + sound { compatible = "ad,tegra-audio-wm8903-tec", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 1e9d33a..78deea5 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -302,7 +302,7 @@ }; pmc { - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; nvidia,core-pwr-good-time = <3845 3845>; @@ -310,6 +310,16 @@ nvidia,sys-clock-req-active-high; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&pci_clk_reg>; + vdd-supply = <&pci_vdd_reg>; + + pci@1,0 { + status = "okay"; + }; + }; + usb@c5000000 { status = "okay"; }; @@ -410,10 +420,28 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 170 0>; /* PV2 */ + gpio = <&gpio TEGRA_GPIO(V, 2) 0>; regulator-always-on; regulator-boot-on; }; + + pci_clk_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "pci_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci_vdd_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "pci_vdd"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 7f8c28d..aab872c 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -494,7 +494,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <100>; nvidia,core-pwr-good-time = <3845 3845>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index c703197..d33a73cf 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -497,7 +497,7 @@ pmc { nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <1000>; nvidia,core-pwr-good-time = <0 3845>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e457083..df40b54 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -455,6 +455,61 @@ #size-cells = <0>; }; + pcie-controller { + compatible = "nvidia,tegra20-pcie"; + device_type = "pci"; + reg = <0x80003000 0x00000800 /* PADS registers */ + 0x80003800 0x00000200 /* AFI registers */ + 0x90000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */ + GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ + 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ + 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA20_CLK_PEX>, + <&tegra_car TEGRA20_CLK_AFI>, + <&tegra_car TEGRA20_CLK_PCIE_XCLK>, + <&tegra_car TEGRA20_CLK_PLL_E>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 87c5f7b..08cad69 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -10,6 +10,40 @@ reg = <0x80000000 0x7ff00000>; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&sys_3v3_pexs_reg>; + vdd-supply = <&ldo1_reg>; + avdd-supply = <&ldo2_reg>; + + pci@1,0 { + status = "okay"; + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <2>; + }; + }; + + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -76,6 +110,11 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + pex_l1_prsnt_n_pdd4 { + nvidia,pins = "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6"; + nvidia,pull = <2>; + }; sdio3 { nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <0>; @@ -85,6 +124,10 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + gpv { + nvidia,pins = "drive_gpv"; + nvidia,pull-up-strength = <16>; + }; }; }; @@ -107,7 +150,7 @@ clock-frequency = <100000>; }; - i2c@7000c700 { + hdmiddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; @@ -262,7 +305,7 @@ pmc { status = "okay"; nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <200>; nvidia,core-pwr-good-time = <3845 3845>; @@ -285,6 +328,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -357,7 +409,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -369,7 +421,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -421,7 +473,9 @@ nvidia,audio-routing = "Headphones", "HPOR", - "Headphones", "HPOL"; + "Headphones", "HPOL", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5640>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index f65b53d..e19dbf2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -31,6 +31,26 @@ reg = <0x80000000 0x40000000>; }; + pcie-controller { + status = "okay"; + pex-clk-supply = <&pex_hvdd_3v3_reg>; + vdd-supply = <&ldo1_reg>; + avdd-supply = <&ldo2_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -173,19 +193,6 @@ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -286,6 +293,26 @@ }; }; }; + + nct1008 { + compatible = "onnn,nct1008"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; + }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; }; spi@7000da00 { @@ -307,7 +334,7 @@ pmc { status = "okay"; nvidia,invert-interrupt; - nvidia,suspend-mode = <2>; + nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; nvidia,cpu-pwr-off-time = <200>; nvidia,core-pwr-good-time = <3845 3845>; @@ -330,6 +357,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d8783f0..0022c12 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -16,6 +16,76 @@ serial4 = &uarte; }; + pcie-controller { + compatible = "nvidia,tegra30-pcie"; + device_type = "pci"; + reg = <0x00003000 0x00000800 /* PADS registers */ + 0x00003800 0x00000200 /* AFI registers */ + 0x10000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */ + GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA30_CLK_PCIE>, + <&tegra_car TEGRA30_CLK_AFI>, + <&tegra_car TEGRA30_CLK_PCIEX>, + <&tegra_car TEGRA30_CLK_PLL_E>, + <&tegra_car TEGRA30_CLK_CML0>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -561,6 +631,92 @@ status = "disabled"; }; + usb@7d000000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>; + nvidia,needs-double-reset; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + + usb@7d004000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d004000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@7d004000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d004000 0x4000>; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_CDEV2>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts deleted file mode 100644 index 95892ec..0000000 --- a/arch/arm/boot/dts/u9540.dts +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -/include/ "dbx5x0.dtsi" - -/ { - model = "ST-Ericsson U9540 platform with Device Tree"; - compatible = "st-ericsson,u9540"; - - memory { - reg = <0x00000000 0x20000000>; - }; - - soc-u9500 { - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - - cd-gpios = <&gpio7 6 0x4>; // 230 - cd-inverted; - - status = "okay"; - }; - - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; - bus-width = <4>; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 6f54a64..e32b92b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -41,8 +41,8 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; - arm,data-latency = <2 3 2>; - arm,tag-latency = <2 3 2>; + arm,data-latency = <3 2 2>; + arm,tag-latency = <2 2 2>; cache-unified; cache-level = <2>; }; diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 5981c3d..4d42da4 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK select NOMADIK_8815 select I2C select I2C_ALGOBIT + select I2C_NOMADIK endmenu endif diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index 3835979..f6a2c4b 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL), OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL), - OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL), OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL), OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL), diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3912ce9..cdefd7d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,3 +1,41 @@ +config ARCH_SHMOBILE_MULTI + bool "SH-Mobile Series" if ARCH_MULTI_V7 + depends on MMU + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT + select PINCTRL + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + +if ARCH_SHMOBILE_MULTI + +comment "SH-Mobile System Type" + +config ARCH_EMEV2 + bool "Emma Mobile EV2" + +comment "SH-Mobile Board Type" + +config MACH_KZM9D_REFERENCE + bool "KZM9D board - Reference Device Tree Implementation" + depends on ARCH_EMEV2 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + ---help--- + Use reference implementation of KZM9D board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + +comment "SH-Mobile System Configuration" +endif + if ARCH_SHMOBILE comment "SH-Mobile System Type" @@ -156,6 +194,18 @@ config MACH_KZM9D select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF +config MACH_KZM9D_REFERENCE + bool "KZM9D board - Reference Device Tree Implementation" + depends on ARCH_EMEV2 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of KZM9D board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 @@ -186,6 +236,15 @@ config CPU_HAS_INTEVT bool default y +config SH_CLK_CPG + bool + +source "drivers/sh/Kconfig" + +endif + +if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI + menu "Timer and clock configuration" config SHMOBILE_TIMER_HZ @@ -220,9 +279,4 @@ config EM_TIMER_STI endmenu -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6165a51..b150c45 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -2,18 +2,33 @@ # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include + # Common objects -obj-y := timer.o console.o clock.o +obj-y := timer.o console.o # CPU objects -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o -obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o -obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o -obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o -obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o -obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o -obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o +obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o +obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o intc-r8a7740.o +obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o +obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o intc-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o + +# Clock objects +ifndef CONFIG_COMMON_CLK +obj-y += clock.o +obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o +obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o +obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o +obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o +obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o +obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o +obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o +endif # SMP objects smp-y := platsmp.o headsmp.o @@ -46,6 +61,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o +obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 84c6868..7785c52 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 +loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 8f677df..fd2446d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -24,7 +24,6 @@ #include <linux/kernel.h> #include <linux/gpio.h> #include <linux/io.h> -#include <linux/pinctrl/machine.h> #include <mach/common.h> #include <mach/r8a7740.h> #include <asm/mach/arch.h> @@ -119,12 +118,6 @@ * usbhsf_power_ctrl() */ -static const struct pinctrl_map eva_pinctrl_map[] = { - /* SCIFA1 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", - "scifa1_data", "scifa1"), -}; - static void __init eva_clock_init(void) { struct clk *system = clk_get(NULL, "system_clk"); @@ -165,27 +158,18 @@ clock_error: */ static void __init eva_init(void) { - r8a7740_clock_init(MD_CK0 | MD_CK2); eva_clock_init(); - pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); - r8a7740_pinmux_init(); - r8a7740_meram_workaround(); - /* - * Touchscreen - * TODO: Move reset GPIO over to .dts when we can reference it - */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif r8a7740_add_standard_devices_dt(); + r8a7740_pm_init(); } diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c new file mode 100644 index 0000000..8f8bb2f --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -0,0 +1,47 @@ +/* + * kzm9d board support - Reference DT implementation + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <mach/emev2.h> +#include <mach/common.h> +#include <asm/mach/arch.h> + +static void __init kzm9d_add_standard_devices(void) +{ + if (!IS_ENABLED(CONFIG_COMMON_CLK)) + emev2_clock_init(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d-reference", + NULL, +}; + +DT_MACHINE_START(KZM9D_DT, "kzm9d") + .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, + .init_early = emev2_init_delay, + .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, + .dt_compat = kzm9d_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 15900f1..30c2cc6 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -86,8 +86,6 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, .dt_compat = kzm9d_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 41092bb..a66a808 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -21,66 +21,19 @@ */ #include <linux/delay.h> -#include <linux/gpio.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/input.h> #include <linux/of_platform.h> -#include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf-generic.h> #include <mach/sh73a0.h> #include <mach/common.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -static unsigned long pin_pullup_conf[] = { - PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), -}; - -static const struct pinctrl_map kzm_pinctrl_map[] = { - PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0", - "i2c3_1", "i2c3"), - /* MMCIF */ - PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", - "mmc0_data8_0", "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", - "mmc0_ctrl_0", "mmc0"), - PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", - "PORT279", pin_pullup_conf), - PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", - "mmc0_data8_0", pin_pullup_conf), - /* SCIFA4 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", - "scifa4_data", "scifa4"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", - "scifa4_ctrl", "scifa4"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", - "sdhi0_wp", "sdhi0"), - /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", - "sdhi2_data4", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", - "sdhi2_ctrl", "sdhi2"), -}; - static void __init kzm_init(void) { sh73a0_add_standard_devices_dt(); - pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); - sh73a0_pinmux_init(); - - /* enable SD */ - gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - - gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c index 480d882..3d1c439 100644 --- a/arch/arm/mach-shmobile/board-marzen-reference.c +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -19,42 +19,14 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/pinctrl/machine.h> #include <mach/r8a7779.h> #include <mach/common.h> #include <mach/irqs.h> #include <asm/irq.h> #include <asm/mach/arch.h> -static const struct pinctrl_map marzen_pinctrl_map[] = { - /* SCIF2 (CN18: DEBUG0) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", - "scif2_data_c", "scif2"), - /* SCIF4 (CN19: DEBUG1) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", - "scif4_data", "scif4"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_wp", "sdhi0"), - /* SMSC */ - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", - "intc_irq1_b", "intc"), - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", - "lbsc_ex_cs0", "lbsc"), -}; - static void __init marzen_init(void) { - pinctrl_register_mappings(marzen_pinctrl_map, - ARRAY_SIZE(marzen_pinctrl_map)); - r8a7779_pinmux_init(); - r8a7779_add_standard_devices_dt(); } diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index 3e0c044..b0ab4b7 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -2,7 +2,6 @@ #define __ASM_EMEV2_H__ extern void emev2_map_io(void); -extern void emev2_init_irq(void); extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index e4b4693..1553af8 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -38,13 +38,6 @@ static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP - /* 128K entity map for 0xe0100000 (SMU) */ - { - .virtual = 0xe0100000, - .pfn = __phys_to_pfn(0xe0100000), - .length = SZ_128K, - .type = MT_DEVICE - }, /* 2M mapping for SCU + L2 controller */ { .virtual = 0xf0000000, @@ -182,7 +175,8 @@ static struct resource pmu_resources[] = { void __init emev2_add_standard_devices(void) { - emev2_clock_init(); + if (!IS_ENABLED(CONFIG_COMMON_CLK)) + emev2_clock_init(); emev2_register_uart(0); emev2_register_uart(1); @@ -202,20 +196,6 @@ void __init emev2_init_delay(void) shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - /* Static mappings, never released */ - gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); - gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* Use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); -} - #ifdef CONFIG_USE_OF static const char *emev2_boards_compat_dt[] __initdata = { @@ -225,8 +205,8 @@ static const char *emev2_boards_compat_dt[] __initdata = { DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 22a05a8..1fcd607 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -38,9 +38,12 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { + /* setup EMEV2 specific SCU base, enable */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); scu_enable(shmobile_scu_base); /* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */ + emev2_clock_init(); /* need ioremapped SMU */ emev2_set_boot_vector(__pa(shmobile_boot_vector)); shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); shmobile_boot_arg = (unsigned long)shmobile_scu_base; @@ -49,21 +52,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } -static void __init emev2_smp_init_cpus(void) -{ - unsigned int ncores; - - /* setup EMEV2 specific SCU base */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - - ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; - - shmobile_smp_init_cpus(ncores); -} - struct smp_operations emev2_smp_ops __initdata = { - .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 12eee81..2061b6a 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -223,10 +223,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), /* Requires clock name bindings. */ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c index a0a2657..4777a73 100644 --- a/drivers/input/serio/altera_ps2.c +++ b/drivers/input/serio/altera_ps2.c @@ -176,6 +176,7 @@ static int altera_ps2_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id altera_ps2_match[] = { { .compatible = "ALTR,ps2-1.0", }, + { .compatible = "altr,ps2-1.0", }, {}, }; MODULE_DEVICE_TABLE(of, altera_ps2_match); diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index f38855f..9a64c3f 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -276,6 +276,7 @@ static int altera_spi_remove(struct platform_device *dev) #ifdef CONFIG_OF static const struct of_device_id altera_spi_match[] = { { .compatible = "ALTR,spi-1.0", }, + { .compatible = "altr,spi-1.0", }, {}, }; MODULE_DEVICE_TABLE(of, altera_spi_match); diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 18e038f..59b3da9 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -473,6 +473,7 @@ static int altera_jtaguart_remove(struct platform_device *pdev) #ifdef CONFIG_OF static struct of_device_id altera_jtaguart_match[] = { { .compatible = "ALTR,juart-1.0", }, + { .compatible = "altr,juart-1.0", }, {}, }; MODULE_DEVICE_TABLE(of, altera_jtaguart_match); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 6431472..501667e3 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -615,6 +615,7 @@ static int altera_uart_remove(struct platform_device *pdev) #ifdef CONFIG_OF static struct of_device_id altera_uart_match[] = { { .compatible = "ALTR,uart-1.0", }, + { .compatible = "altr,uart-1.0", }, {}, }; MODULE_DEVICE_TABLE(of, altera_uart_match); diff --git a/include/dt-bindings/pinctrl/nomadik.h b/include/dt-bindings/pinctrl/nomadik.h new file mode 100644 index 0000000..638fb32 --- /dev/null +++ b/include/dt-bindings/pinctrl/nomadik.h @@ -0,0 +1,36 @@ +/* + * nomadik.h + * + * Copyright (C) ST-Ericsson SA 2013 + * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#define INPUT_NOPULL 0 +#define INPUT_PULLUP 1 +#define INPUT_PULLDOWN 2 + +#define OUTPUT_LOW 0 +#define OUTPUT_HIGH 1 +#define DIR_OUTPUT 2 + +#define SLPM_DISABLED 0 +#define SLPM_ENABLED 1 + +#define SLPM_INPUT_NOPULL 0 +#define SLPM_INPUT_PULLUP 1 +#define SLPM_INPUT_PULLDOWN 2 +#define SLPM_DIR_INPUT 3 + +#define SLPM_OUTPUT_LOW 0 +#define SLPM_OUTPUT_HIGH 1 +#define SLPM_DIR_OUTPUT 2 + +#define SLPM_WAKEUP_DISABLE 0 +#define SLPM_WAKEUP_ENABLE 1 + +#define GPIOMODE_DISABLED 0 +#define GPIOMODE_ENABLED 1 + +#define SLPM_PDIS_DISABLED 0 +#define SLPM_PDIS_ENABLED 1 |
