summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFlorian Fainelli <f.fainelli@gmail.com>2014-03-24 16:36:48 -0700
committerDavid S. Miller <davem@davemloft.net>2014-03-26 16:19:24 -0400
commit9918542e2d02f259f909a956e41bd6d5827fa422 (patch)
treed0be668523442a9793db20a01dd370eb44a66ff5
parenta3622f2c824135a7ce235a61bf9ff5688e8f576b (diff)
downloadop-kernel-dev-9918542e2d02f259f909a956e41bd6d5827fa422.zip
op-kernel-dev-9918542e2d02f259f909a956e41bd6d5827fa422.tar.gz
net: phy: bcm7xxx: fix spurious MDIO failures during workaround
Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL registers turned out to unveil some spurious MDIO read/write failures which would make the workaround partially applied. The fix is to write first to the VCO, RCAL, RC_CAL registers, and then write to the AFE registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/phy/bcm7xxx.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 3141941..5991168 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -103,21 +103,6 @@ static void phy_write_misc(struct phy_device *phydev,
static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
{
- /* write AFE_RXCONFIG_0 */
- phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
-
- /* write AFE_RXCONFIG_1 */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
-
- /* write AFE_RX_LP_COUNTER */
- phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
-
- /* write AFE_HPF_TRIM_OTHERS */
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-
- /* write AFTE_TX_CONFIG */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
-
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
@@ -143,6 +128,21 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
/* Disable Reset R_CAL/RC_CAL Engine */
phy_write_exp(phydev, CORE_EXPB0, 0x0000);
+ /* write AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
return 0;
}
OpenPOWER on IntegriCloud