summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPhilipp Zabel <philipp.zabel@gmail.com>2009-01-18 17:40:27 +0100
committerAnton Vorontsov <cbouatmailru@gmail.com>2009-02-02 20:15:47 +0300
commit5bf2b994bfe11bfe86231050897b2d881ca544d9 (patch)
treedcd098222aab1385a24cc68e34967c8ffb71b665
parentcc52a29e6245acd9032fcfa0ffcab4cc612de986 (diff)
downloadop-kernel-dev-5bf2b994bfe11bfe86231050897b2d881ca544d9.zip
op-kernel-dev-5bf2b994bfe11bfe86231050897b2d881ca544d9.tar.gz
pda_power: Add optional OTG transceiver and voltage regulator support
This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
-rw-r--r--drivers/power/pda_power.c89
-rw-r--r--include/linux/pda_power.h2
2 files changed, 79 insertions, 12 deletions
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index b56a704..a232de6 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -12,11 +12,14 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/power_supply.h>
#include <linux/pda_power.h>
+#include <linux/regulator/consumer.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
+#include <linux/usb/otg.h>
static inline unsigned int get_irq_flags(struct resource *res)
{
@@ -35,6 +38,11 @@ static struct timer_list supply_timer;
static struct timer_list polling_timer;
static int polling;
+#ifdef CONFIG_USB_OTG_UTILS
+static struct otg_transceiver *transceiver;
+#endif
+static struct regulator *ac_draw;
+
enum {
PDA_PSY_OFFLINE = 0,
PDA_PSY_ONLINE = 1,
@@ -104,18 +112,35 @@ static void update_status(void)
static void update_charger(void)
{
- if (!pdata->set_charge)
- return;
-
- if (new_ac_status > 0) {
- dev_dbg(dev, "charger on (AC)\n");
- pdata->set_charge(PDA_POWER_CHARGE_AC);
- } else if (new_usb_status > 0) {
- dev_dbg(dev, "charger on (USB)\n");
- pdata->set_charge(PDA_POWER_CHARGE_USB);
- } else {
- dev_dbg(dev, "charger off\n");
- pdata->set_charge(0);
+ static int regulator_enabled;
+ int max_uA = pdata->ac_max_uA;
+
+ if (pdata->set_charge) {
+ if (new_ac_status > 0) {
+ dev_dbg(dev, "charger on (AC)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_AC);
+ } else if (new_usb_status > 0) {
+ dev_dbg(dev, "charger on (USB)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_USB);
+ } else {
+ dev_dbg(dev, "charger off\n");
+ pdata->set_charge(0);
+ }
+ } else if (ac_draw) {
+ if (new_ac_status > 0) {
+ regulator_set_current_limit(ac_draw, max_uA, max_uA);
+ if (!regulator_enabled) {
+ dev_dbg(dev, "charger on (AC)\n");
+ regulator_enable(ac_draw);
+ regulator_enabled = 1;
+ }
+ } else {
+ if (regulator_enabled) {
+ dev_dbg(dev, "charger off\n");
+ regulator_disable(ac_draw);
+ regulator_enabled = 0;
+ }
+ }
}
}
@@ -194,6 +219,13 @@ static void polling_timer_func(unsigned long unused)
jiffies + msecs_to_jiffies(pdata->polling_interval));
}
+#ifdef CONFIG_USB_OTG_UTILS
+static int otg_is_usb_online(void)
+{
+ return (transceiver->state == OTG_STATE_B_PERIPHERAL);
+}
+#endif
+
static int pda_power_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -227,6 +259,9 @@ static int pda_power_probe(struct platform_device *pdev)
if (!pdata->polling_interval)
pdata->polling_interval = 2000;
+ if (!pdata->ac_max_uA)
+ pdata->ac_max_uA = 500000;
+
setup_timer(&charger_timer, charger_timer_func, 0);
setup_timer(&supply_timer, supply_timer_func, 0);
@@ -240,6 +275,13 @@ static int pda_power_probe(struct platform_device *pdev)
pda_psy_usb.num_supplicants = pdata->num_supplicants;
}
+ ac_draw = regulator_get(dev, "ac_draw");
+ if (IS_ERR(ac_draw)) {
+ dev_dbg(dev, "couldn't get ac_draw regulator\n");
+ ac_draw = NULL;
+ ret = PTR_ERR(ac_draw);
+ }
+
if (pdata->is_ac_online) {
ret = power_supply_register(&pdev->dev, &pda_psy_ac);
if (ret) {
@@ -261,6 +303,13 @@ static int pda_power_probe(struct platform_device *pdev)
}
}
+#ifdef CONFIG_USB_OTG_UTILS
+ transceiver = otg_get_transceiver();
+ if (transceiver && !pdata->is_usb_online) {
+ pdata->is_usb_online = otg_is_usb_online;
+ }
+#endif
+
if (pdata->is_usb_online) {
ret = power_supply_register(&pdev->dev, &pda_psy_usb);
if (ret) {
@@ -300,10 +349,18 @@ usb_irq_failed:
usb_supply_failed:
if (pdata->is_ac_online && ac_irq)
free_irq(ac_irq->start, &pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+ if (transceiver)
+ otg_put_transceiver(transceiver);
+#endif
ac_irq_failed:
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
ac_supply_failed:
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
if (pdata->exit)
pdata->exit(dev);
init_failed:
@@ -327,6 +384,14 @@ static int pda_power_remove(struct platform_device *pdev)
power_supply_unregister(&pda_psy_usb);
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+ if (transceiver)
+ otg_put_transceiver(transceiver);
+#endif
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
if (pdata->exit)
pdata->exit(dev);
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
index cb7d10f..d4cf7a2 100644
--- a/include/linux/pda_power.h
+++ b/include/linux/pda_power.h
@@ -31,6 +31,8 @@ struct pda_power_pdata {
unsigned int wait_for_status; /* msecs, default is 500 */
unsigned int wait_for_charger; /* msecs, default is 500 */
unsigned int polling_interval; /* msecs, default is 2000 */
+
+ unsigned long ac_max_uA; /* current to draw when on AC */
};
#endif /* __PDA_POWER_H__ */
OpenPOWER on IntegriCloud