summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2008-12-29 18:08:11 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-12-29 18:08:11 +0000
commit47992cbdaef2f18a47871b2ed01ad27f568c8b73 (patch)
treebfed4f8c7ea3164afc75a85ab3624586c37c37f4
parent4655a0de36e8e903e99a8d152818e3aae86dae1a (diff)
parent198fc108ee4c2cd3f08954eae6a819c81c03214b (diff)
downloadop-kernel-dev-47992cbdaef2f18a47871b2ed01ad27f568c8b73.zip
op-kernel-dev-47992cbdaef2f18a47871b2ed01ad27f568c8b73.tar.gz
Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
-rw-r--r--Documentation/arm/pxa/mfp.txt286
-rw-r--r--Documentation/fb/pxafb.txt92
-rw-r--r--arch/arm/mach-pxa/generic.c16
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa930.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/pxafb.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-lcd.h60
-rw-r--r--arch/arm/mach-pxa/include/mach/timex.h8
-rw-r--r--arch/arm/mach-pxa/tavorevb.c412
-rw-r--r--arch/arm/mach-pxa/time.c10
-rw-r--r--arch/arm/mach-sa1100/include/mach/hardware.h4
-rw-r--r--drivers/rtc/rtc-sa1100.c12
-rw-r--r--drivers/video/Kconfig5
-rw-r--r--drivers/video/pxafb.c859
-rw-r--r--drivers/video/pxafb.h79
-rw-r--r--drivers/watchdog/sa1100_wdt.c11
16 files changed, 1549 insertions, 309 deletions
diff --git a/Documentation/arm/pxa/mfp.txt b/Documentation/arm/pxa/mfp.txt
new file mode 100644
index 0000000..a179e5b
--- /dev/null
+++ b/Documentation/arm/pxa/mfp.txt
@@ -0,0 +1,286 @@
+ MFP Configuration for PXA2xx/PXA3xx Processors
+
+ Eric Miao <eric.miao@marvell.com>
+
+MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
+later PXA series processors. This document describes the existing MFP API,
+and how board/platform driver authors could make use of it.
+
+ Basic Concept
+===============
+
+Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
+mechanism is introduced from PXA3xx to completely move the pin-mux functions
+out of the GPIO controller. In addition to pin-mux configurations, the MFP
+also controls the low power state, driving strength, pull-up/down and event
+detection of each pin. Below is a diagram of internal connections between
+the MFP logic and the remaining SoC peripherals:
+
+ +--------+
+ | |--(GPIO19)--+
+ | GPIO | |
+ | |--(GPIO...) |
+ +--------+ |
+ | +---------+
+ +--------+ +------>| |
+ | PWM2 |--(PWM_OUT)-------->| MFP |
+ +--------+ +------>| |-------> to external PAD
+ | +---->| |
+ +--------+ | | +-->| |
+ | SSP2 |---(TXD)----+ | | +---------+
+ +--------+ | |
+ | |
+ +--------+ | |
+ | Keypad |--(MKOUT4)----+ |
+ +--------+ |
+ |
+ +--------+ |
+ | UART2 |---(TXD)--------+
+ +--------+
+
+NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily
+mean it's dedicated for GPIO19, only as a hint that internally this pin
+can be routed from GPIO19 of the GPIO controller.
+
+To better understand the change from PXA25x/PXA27x GPIO alternate function
+to this new MFP mechanism, here are several key points:
+
+ 1. GPIO controller on PXA3xx is now a dedicated controller, same as other
+ internal controllers like PWM, SSP and UART, with 128 internal signals
+ which can be routed to external through one or more MFPs (e.g. GPIO<0>
+ can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
+ see arch/arm/mach-pxa/mach/include/mfp-pxa300.h)
+
+ 2. Alternate function configuration is removed from this GPIO controller,
+ the remaining functions are pure GPIO-specific, i.e.
+
+ - GPIO signal level control
+ - GPIO direction control
+ - GPIO level change detection
+
+ 3. Low power state for each pin is now controlled by MFP, this means the
+ PGSRx registers on PXA2xx are now useless on PXA3xx
+
+ 4. Wakeup detection is now controlled by MFP, PWER does not control the
+ wakeup from GPIO(s) any more, depending on the sleeping state, ADxER
+ (as defined in pxa3xx-regs.h) controls the wakeup from MFP
+
+NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
+mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
+pad (or ball).
+
+ MFP API Usage
+===============
+
+For board code writers, here are some guidelines:
+
+1. include ONE of the following header files in your <board>.c:
+
+ - #include <mach/mfp-pxa25x.h>
+ - #include <mach/mfp-pxa27x.h>
+ - #include <mach/mfp-pxa300.h>
+ - #include <mach/mfp-pxa320.h>
+ - #include <mach/mfp-pxa930.h>
+
+ NOTE: only one file in your <board>.c, depending on the processors used,
+ because pin configuration definitions may conflict in these file (i.e.
+ same name, different meaning and settings on different processors). E.g.
+ for zylonite platform, which support both PXA300/PXA310 and PXA320, two
+ separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c
+ (in addition to handle MFP configuration differences, they also handle
+ the other differences between the two combinations).
+
+ NOTE: PXA300 and PXA310 are almost identical in pin configurations (with
+ PXA310 supporting some additional ones), thus the difference is actually
+ covered in a single mfp-pxa300.h.
+
+2. prepare an array for the initial pin configurations, e.g.:
+
+ static unsigned long mainstone_pin_config[] __initdata = {
+ /* Chip Select */
+ GPIO15_nCS_1,
+
+ /* LCD - 16bpp Active TFT */
+ GPIOxx_TFT_LCD_16BPP,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ ...
+
+ /* GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+ };
+
+ a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
+ and written to the actual registers, they are useless and may discard,
+ adding '__initdata' will help save some additional bytes here.
+
+ b) when there is only one possible pin configurations for a component,
+ some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on
+ PXA25x and PXA27x processors
+
+ c) if by board design, a pin can be configured to wake up the system
+ from low power state, it can be 'OR'ed with any of:
+
+ WAKEUP_ON_EDGE_BOTH
+ WAKEUP_ON_EDGE_RISE
+ WAKEUP_ON_EDGE_FALL
+ WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs,
+
+ to indicate that this pin has the capability of wake-up the system,
+ and on which edge(s). This, however, doesn't necessarily mean the
+ pin _will_ wakeup the system, it will only when set_irq_wake() is
+ invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq())
+ and eventually calls gpio_set_wake() for the actual register setting.
+
+ d) although PXA3xx MFP supports edge detection on each pin, the
+ internal logic will only wakeup the system when those specific bits
+ in ADxER registers are set, which can be well mapped to the
+ corresponding peripheral, thus set_irq_wake() can be called with
+ the peripheral IRQ to enable the wakeup.
+
+
+ MFP on PXA3xx
+===============
+
+Every external I/O pad on PXA3xx (excluding those for special purpose) has
+one MFP logic associated, and is controlled by one MFP register (MFPR).
+
+The MFPR has the following bit definitions (for PXA300/PXA310/PXA320):
+
+ 31 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
+ +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+ | RESERVED |PS|PU|PD| DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL |
+ +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+
+ Bit 3: RESERVED
+ Bit 4: EDGE_RISE_EN - enable detection of rising edge on this pin
+ Bit 5: EDGE_FALL_EN - enable detection of falling edge on this pin
+ Bit 6: EDGE_CLEAR - disable edge detection on this pin
+ Bit 7: SLEEP_OE_N - enable outputs during low power modes
+ Bit 8: SLEEP_DATA - output data on the pin during low power modes
+ Bit 9: SLEEP_SEL - selection control for low power modes signals
+ Bit 13: PULLDOWN_EN - enable the internal pull-down resistor on this pin
+ Bit 14: PULLUP_EN - enable the internal pull-up resistor on this pin
+ Bit 15: PULL_SEL - pull state controlled by selected alternate function
+ (0) or by PULL{UP,DOWN}_EN bits (1)
+
+ Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7
+ Bit 10-12: DRIVE - drive strength and slew rate
+ 0b000 - fast 1mA
+ 0b001 - fast 2mA
+ 0b002 - fast 3mA
+ 0b003 - fast 4mA
+ 0b004 - slow 6mA
+ 0b005 - fast 6mA
+ 0b006 - slow 10mA
+ 0b007 - fast 10mA
+
+ MFP Design for PXA2xx/PXA3xx
+==============================
+
+Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
+MFP API is introduced to cover both series of processors.
+
+The basic idea of this design is to introduce definitions for all possible pin
+configurations, these definitions are processor and platform independent, and
+the actual API invoked to convert these definitions into register settings and
+make them effective there-after.
+
+ Files Involved
+ --------------
+
+ - arch/arm/mach-pxa/include/mach/mfp.h
+
+ for
+ 1. Unified pin definitions - enum constants for all configurable pins
+ 2. processor-neutral bit definitions for a possible MFP configuration
+
+ - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+
+ for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
+ configurations
+
+ - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+
+ for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
+
+ - arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+ arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+ arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+
+ for processor specific definitions
+
+ - arch/arm/mach-pxa/mfp-pxa3xx.c
+ - arch/arm/mach-pxa/mfp-pxa2xx.c
+
+ for implementation of the pin configuration to take effect for the actual
+ processor.
+
+ Pin Configuration
+ -----------------
+
+ The following comments are copied from mfp.h (see the actual source code
+ for most updated info)
+
+ /*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+ Examples of pin configurations are:
+
+ #define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+ which reads GPIO94 can be configured as SSP3_RXD, with alternate function
+ selection of 1, driving strength of 0b101, and a float state in low power
+ modes.
+
+ NOTE: this is the default setting of this pin being configured as SSP3_RXD
+ which can be modified a bit in board code, though it is not recommended to
+ do so, simply because this default setting is usually carefully encoded,
+ and is supposed to work in most cases.
+
+ Register Settings
+ -----------------
+
+ Register settings on PXA3xx for a pin configuration is actually very
+ straight-forward, most bits can be converted directly into MFPR value
+ in a easier way. Two sets of MFPR values are calculated: the run-time
+ ones and the low power mode ones, to allow different settings.
+
+ The conversion from a generic pin configuration to the actual register
+ settings on PXA2xx is a bit complicated: many registers are involved,
+ including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see
+ mfp-pxa2xx.c for how the conversion is made.
diff --git a/Documentation/fb/pxafb.txt b/Documentation/fb/pxafb.txt
index db9b850..d143a0a 100644
--- a/Documentation/fb/pxafb.txt
+++ b/Documentation/fb/pxafb.txt
@@ -5,9 +5,13 @@ The driver supports the following options, either via
options=<OPTIONS> when modular or video=pxafb:<OPTIONS> when built in.
For example:
- modprobe pxafb options=mode:640x480-8,passive
+ modprobe pxafb options=vmem:2M,mode:640x480-8,passive
or on the kernel command line
- video=pxafb:mode:640x480-8,passive
+ video=pxafb:vmem:2M,mode:640x480-8,passive
+
+vmem: VIDEO_MEM_SIZE
+ Amount of video memory to allocate (can be suffixed with K or M
+ for kilobytes or megabytes)
mode:XRESxYRES[-BPP]
XRES == LCCR1_PPL + 1
@@ -52,3 +56,87 @@ outputen:POLARITY
pixclockpol:POLARITY
pixel clock polarity
0 => falling edge, 1 => rising edge
+
+
+Overlay Support for PXA27x and later LCD controllers
+====================================================
+
+ PXA27x and later processors support overlay1 and overlay2 on-top of the
+ base framebuffer (although under-neath the base is also possible). They
+ support palette and no-palette RGB formats, as well as YUV formats (only
+ available on overlay2). These overlays have dedicated DMA channels and
+ behave in a similar way as a framebuffer.
+
+ However, there are some differences between these overlay framebuffers
+ and normal framebuffers, as listed below:
+
+ 1. overlay can start at a 32-bit word aligned position within the base
+ framebuffer, which means they have a start (x, y). This information
+ is encoded into var->nonstd (no, var->xoffset and var->yoffset are
+ not for such purpose).
+
+ 2. overlay framebuffer is allocated dynamically according to specified
+ 'struct fb_var_screeninfo', the amount is decided by:
+
+ var->xres_virtual * var->yres_virtual * bpp
+
+ bpp = 16 -- for RGB565 or RGBT555
+ = 24 -- for YUV444 packed
+ = 24 -- for YUV444 planar
+ = 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr)
+ = 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr)
+
+ NOTE:
+
+ a. overlay does not support panning in x-direction, thus
+ var->xres_virtual will always be equal to var->xres
+
+ b. line length of overlay(s) must be on a 32-bit word boundary,
+ for YUV planar modes, it is a requirement for the component
+ with minimum bits per pixel, e.g. for YUV420, Cr component
+ for one pixel is actually 2-bits, it means the line length
+ should be a multiple of 16-pixels
+
+ c. starting horizontal position (XPOS) should start on a 32-bit
+ word boundary, otherwise the fb_check_var() will just fail.
+
+ d. the rectangle of the overlay should be within the base plane,
+ otherwise fail
+
+ Applications should follow the sequence below to operate an overlay
+ framebuffer:
+
+ a. open("/dev/fb[1-2]", ...)
+ b. ioctl(fd, FBIOGET_VSCREENINFO, ...)
+ c. modify 'var' with desired parameters:
+ 1) var->xres and var->yres
+ 2) larger var->yres_virtual if more memory is required,
+ usually for double-buffering
+ 3) var->nonstd for starting (x, y) and color format
+ 4) var->{red, green, blue, transp} if RGB mode is to be used
+ d. ioctl(fd, FBIOPUT_VSCREENINFO, ...)
+ e. ioctl(fd, FBIOGET_FSCREENINFO, ...)
+ f. mmap
+ g. ...
+
+ 3. for YUV planar formats, these are actually not supported within the
+ framebuffer framework, application has to take care of the offsets
+ and lengths of each component within the framebuffer.
+
+ 4. var->nonstd is used to pass starting (x, y) position and color format,
+ the detailed bit fields are shown below:
+
+ 31 23 20 10 0
+ +-----------------+---+----------+----------+
+ | ... unused ... |FOR| XPOS | YPOS |
+ +-----------------+---+----------+----------+
+
+ FOR - color format, as defined by OVERLAY_FORMAT_* in pxafb.h
+ 0 - RGB
+ 1 - YUV444 PACKED
+ 2 - YUV444 PLANAR
+ 3 - YUV422 PLANAR
+ 4 - YUR420 PLANAR
+
+ XPOS - starting horizontal position
+ YPOS - starting vertical position
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 85ed0b3..0ccc91c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -24,6 +24,7 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
+#include <asm/mach-types.h>
#include <mach/pxa-regs.h>
#include <mach/reset.h>
@@ -39,6 +40,21 @@ void clear_reset_status(unsigned int mask)
pxa3xx_clear_reset_status(mask);
}
+unsigned long get_clock_tick_rate(void)
+{
+ unsigned long clock_tick_rate;
+
+ if (cpu_is_pxa25x())
+ clock_tick_rate = 3686400;
+ else if (machine_is_mainstone())
+ clock_tick_rate = 3249600;
+ else
+ clock_tick_rate = 3250000;
+
+ return clock_tick_rate;
+}
+EXPORT_SYMBOL(get_clock_tick_rate);
+
/*
* Get the clock frequency as reflected by CCCR and the turbo flag.
* We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 4e782ec..16ab795 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -291,6 +291,8 @@
*/
extern unsigned int get_memclk_frequency_10khz(void);
+/* return the clock tick rate of the OS timer */
+extern unsigned long get_clock_tick_rate(void);
#endif
#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fabd9b4..fa73f56 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -421,6 +421,7 @@
#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0 MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
/* CIR */
#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 4201a88..6932720 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -113,6 +113,7 @@ struct pxafb_mach_info {
unsigned int num_modes;
unsigned int lcd_conn;
+ unsigned long video_mem_size;
u_int fixed_modes:1,
cmap_inverse:1,
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
index f817878..f82dcea 100644
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -12,27 +12,29 @@
#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
-#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
-#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
-#define LCSR (0x038) /* LCD Controller Status Register */
+#define LCSR (0x038) /* LCD Controller Status Register 0 */
+#define LCSR1 (0x034) /* LCD Controller Status Register 1 */
#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
#define TMEDCR (0x044) /* TMED Control Register */
+#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
+#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
+#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */
+#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */
+#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */
+#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */
+
+#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */
+#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */
+#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */
+#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */
+
#define CMDCR (0x100) /* Command Control Register */
#define PRSR (0x104) /* Panel Read Status Register */
-#define LCCR3_1BPP (0 << 24)
-#define LCCR3_2BPP (1 << 24)
-#define LCCR3_4BPP (2 << 24)
-#define LCCR3_8BPP (3 << 24)
-#define LCCR3_16BPP (4 << 24)
-#define LCCR3_18BPP (5 << 24)
-#define LCCR3_18BPP_P (6 << 24)
-#define LCCR3_19BPP (7 << 24)
-#define LCCR3_19BPP_P (1 << 29)
-#define LCCR3_24BPP ((1 << 29) | (1 << 24))
-#define LCCR3_25BPP ((1 << 29) | (2 << 24))
+#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
#define LCCR3_PDFOR_0 (0 << 30)
#define LCCR3_PDFOR_1 (1 << 30)
@@ -42,19 +44,16 @@
#define LCCR4_PAL_FOR_0 (0 << 15)
#define LCCR4_PAL_FOR_1 (1 << 15)
#define LCCR4_PAL_FOR_2 (2 << 15)
+#define LCCR4_PAL_FOR_3 (3 << 15)
#define LCCR4_PAL_FOR_MASK (3 << 15)
#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
-#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
-#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
+#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */
#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
@@ -126,9 +125,6 @@
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
-#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
-
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
@@ -157,8 +153,22 @@
#define LCSR_RD_ST (1 << 11) /* read status */
#define LCSR_CMD_INT (1 << 12) /* command interrupt */
+#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */
+#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */
+
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+/* overlay control registers */
+#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */
+#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */
+#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */
+#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */
+#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */
+#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */
+#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */
+
/* smartpanel related */
#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
#define PRSR_A0 (1 << 8) /* Read Data Source */
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
index b05fc66..af6760a 100644
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -10,6 +10,14 @@
* published by the Free Software Foundation.
*/
+/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
+ * those drivers to at least work, the definition is provided here.
+ *
+ * NOTE: this is no longer accurate when multiple processors and boards
+ * are selected, newer drivers should not depend on this any more. Use
+ * either the clocksource/clockevent or get this at run-time by calling
+ * get_clock_tick_rate() (as defined in generic.c).
+ */
#if defined(CONFIG_PXA25x)
/* PXA250/210 timer base */
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 589d32b..58ef08a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,12 +18,15 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa930.h>
+#include <mach/pxafb.h>
+#include <mach/pxa27x_keypad.h>
#include "devices.h"
#include "generic.h"
@@ -33,6 +36,45 @@ static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
/* Ethernet */
DF_nCS1_nCS3,
GPIO47_GPIO,
+
+ /* LCD */
+ GPIO23_LCD_DD0,
+ GPIO24_LCD_DD1,
+ GPIO25_LCD_DD2,
+ GPIO26_LCD_DD3,
+ GPIO27_LCD_DD4,
+ GPIO28_LCD_DD5,
+ GPIO29_LCD_DD6,
+ GPIO44_LCD_DD7,
+ GPIO21_LCD_CS,
+ GPIO22_LCD_CS2,
+
+ GPIO17_LCD_FCLK_RD,
+ GPIO18_LCD_LCLK_A0,
+ GPIO19_LCD_PCLK_WR,
+
+ /* LCD Backlight */
+ GPIO43_PWM3, /* primary backlight */
+ GPIO32_PWM0, /* secondary backlight */
+
+ /* Keypad */
+ GPIO0_KP_MKIN_0,
+ GPIO2_KP_MKIN_1,
+ GPIO4_KP_MKIN_2,
+ GPIO6_KP_MKIN_3,
+ GPIO8_KP_MKIN_4,
+ GPIO10_KP_MKIN_5,
+ GPIO12_KP_MKIN_6,
+ GPIO1_KP_MKOUT_0,
+ GPIO3_KP_MKOUT_1,
+ GPIO5_KP_MKOUT_2,
+ GPIO7_KP_MKOUT_3,
+ GPIO9_KP_MKOUT_4,
+ GPIO11_KP_MKOUT_5,
+ GPIO13_KP_MKOUT_6,
+
+ GPIO14_KP_DKIN_2,
+ GPIO15_KP_DKIN_3,
};
#define TAVOREVB_ETH_PHYS (0x14000000)
@@ -64,12 +106,382 @@ static struct platform_device smc91x_device = {
},
};
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int tavorevb_matrix_key_map[] = {
+ /* KEY(row, col, key_code) */
+ KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
+ KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
+ KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
+ KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
+ KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
+ KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
+
+ KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
+
+ KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
+ KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
+ KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
+
+ KEY(6, 6, KEY_SPACE),
+ KEY(0, 0, KEY_KPASTERISK), /* * */
+ KEY(0, 1, KEY_KPDOT), /* # */
+
+ KEY(4, 1, KEY_UP),
+ KEY(4, 3, KEY_DOWN),
+ KEY(4, 0, KEY_LEFT),
+ KEY(4, 2, KEY_RIGHT),
+ KEY(6, 0, KEY_HOME),
+ KEY(3, 2, KEY_END),
+ KEY(6, 1, KEY_DELETE),
+ KEY(5, 2, KEY_BACK),
+ KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */
+
+ KEY(4, 4, KEY_ENTER), /* scroll push */
+ KEY(6, 2, KEY_ENTER), /* keypad action */
+
+ KEY(3, 1, KEY_SEND),
+ KEY(5, 3, KEY_RECORD),
+ KEY(5, 0, KEY_VOLUMEUP),
+ KEY(5, 1, KEY_VOLUMEDOWN),
+
+ KEY(3, 0, KEY_F22), /* soft1 */
+ KEY(3, 3, KEY_F23), /* soft2 */
+};
+
+static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
+ .matrix_key_rows = 7,
+ .matrix_key_cols = 7,
+ .matrix_key_map = tavorevb_matrix_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(tavorevb_matrix_key_map),
+ .debounce_interval = 30,
+};
+
+static void __init tavorevb_init_keypad(void)
+{
+ pxa_set_keypad_info(&tavorevb_keypad_info);
+}
+#else
+static inline void tavorevb_init_keypad(void) {}
+#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
+ [0] = {
+ /* primary backlight */
+ .pwm_id = 2,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 100000,
+ },
+ [1] = {
+ /* secondary backlight */
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 100000,
+ },
+};
+
+static struct platform_device tavorevb_backlight_devices[] = {
+ [0] = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &tavorevb_backlight_data[0],
+ },
+ },
+ [1] = {
+ .name = "pwm-backlight",
+ .id = 1,
+ .dev = {
+ .platform_data = &tavorevb_backlight_data[1],
+ },
+ },
+};
+
+static uint16_t panel_init[] = {
+ /* DSTB OUT */
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ /* STB OUT */
+ SMART_CMD(0x00),
+ SMART_CMD(0x1D),
+ SMART_DAT(0x00),
+ SMART_DAT(0x05),
+ SMART_DELAY(1),
+
+ /* P-ON Init sequence */
+ SMART_CMD(0x00), /* OSC ON */
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x00),
+ SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
+ SMART_DAT(0x01),
+ SMART_DAT(0x27),
+ SMART_CMD(0x00),
+ SMART_CMD(0x02), /* LINE INV */
+ SMART_DAT(0x02),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x03), /* IF mode(1) */
+ SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
+ SMART_DAT(0x30),
+ SMART_CMD(0x07),
+ SMART_CMD(0x00), /* RAM Write Mode */
+ SMART_DAT(0x00),
+ SMART_DAT(0x03),
+ SMART_CMD(0x00),
+
+ /* DISPLAY Setting, 262K, fixed(NO scroll), no split screen */
+ SMART_CMD(0x07),
+ SMART_DAT(0x40), /* 16/18/19 BPP */
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
+ SMART_DAT(0x03),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
+ SMART_DAT(0x00),
+ SMART_DAT(0x10),
+ SMART_CMD(0x00),
+ SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
+ SMART_DAT(0x03),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
+ SMART_DAT(0x01),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+ SMART_DAT(0x20),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x1C),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x03),
+ SMART_CMD(0x00),
+ SMART_DAT(0x04),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x01),
+ SMART_DAT(0x03),
+ SMART_DAT(0x04),
+ SMART_CMD(0x03),
+ SMART_CMD(0x02),
+ SMART_DAT(0x04),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x03),
+ SMART_DAT(0x03),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x04),
+ SMART_DAT(0x01),
+ SMART_DAT(0x01),
+ SMART_CMD(0x03),
+ SMART_CMD(0x05),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x04),
+ SMART_CMD(0x02),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x04),
+ SMART_CMD(0x03),
+ SMART_DAT(0x01),
+ SMART_DAT(0x3F),
+ SMART_DELAY(0),
+
+ /* DISP RAM setting: 240*320 */
+ SMART_CMD(0x04), /* HADDR, START 0 */
+ SMART_CMD(0x06),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00), /* x1,3 */
+ SMART_CMD(0x04), /* HADDR, END 4 */
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0xEF), /* x2, 7 */
+ SMART_CMD(0x04), /* VADDR, START 8 */
+ SMART_CMD(0x08),
+ SMART_DAT(0x00), /* y1, 10 */
+ SMART_DAT(0x00), /* y1, 11 */
+ SMART_CMD(0x04), /* VADDR, END 12 */
+ SMART_CMD(0x09),
+ SMART_DAT(0x01), /* y2, 14 */
+ SMART_DAT(0x3F), /* y2, 15 */
+ SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00), /* x1, 19 */
+ SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
+ SMART_CMD(0x01),
+ SMART_DAT(0x00), /* y1, 22 */
+ SMART_DAT(0x00), /* y1, 23 */
+};
+
+static uint16_t panel_on[] = {
+ /* Power-IC ON */
+ SMART_CMD(0x01),
+ SMART_CMD(0x02),
+ SMART_DAT(0x07),
+ SMART_DAT(0x7D),
+ SMART_CMD(0x01),
+ SMART_CMD(0x03),
+ SMART_DAT(0x00),
+ SMART_DAT(0x05),
+ SMART_CMD(0x01),
+ SMART_CMD(0x04),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x01),
+ SMART_CMD(0x05),
+ SMART_DAT(0x00),
+ SMART_DAT(0x15),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xC0),
+ SMART_DAT(0x10),
+ SMART_DELAY(30),
+
+ /* DISP ON */
+ SMART_CMD(0x01),
+ SMART_CMD(0x01),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xFF),
+ SMART_DAT(0xFE),
+ SMART_DELAY(150),
+};
+
+static uint16_t panel_off[] = {
+ SMART_CMD(0x00),
+ SMART_CMD(0x1E),
+ SMART_DAT(0x00),
+ SMART_DAT(0x0A),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xFF),
+ SMART_DAT(0xEE),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xF8),
+ SMART_DAT(0x12),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xE8),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xC0),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0x40),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x10),
+};
+
+static uint16_t update_framedata[] = {
+ /* write ram */
+ SMART_CMD(0x02),
+ SMART_CMD(0x02),
+
+ /* write frame data */
+ SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ struct fb_info *info = container_of(var, struct fb_info, var);
+
+ if (on) {
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
+ } else {
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
+ }
+
+ if (pxafb_smart_flush(info))
+ pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm020d550_update(struct fb_info *info)
+{
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+ pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
+ [0] = {
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .a0csrd_set_hld = 30,
+ .a0cswr_set_hld = 30,
+ .wr_pulse_width = 30,
+ .rd_pulse_width = 170,
+ .op_hold_time = 30,
+ .cmd_inh_time = 60,
+
+ /* L_LCLK_A0 and L_LCLK_RD active low */
+ .sync = FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
+static struct pxafb_mach_info tavorevb_lcd_info = {
+ .modes = toshiba_ltm020d550_modes,
+ .num_modes = 1,
+ .lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = ltm020d550_lcd_power,
+ .smart_update = ltm020d550_update,
+};
+
+static void __init tavorevb_init_lcd(void)
+{
+ platform_device_register(&tavorevb_backlight_devices[0]);
+ platform_device_register(&tavorevb_backlight_devices[1]);
+ set_pxa_fb_info(&tavorevb_lcd_info);
+}
+#else
+static inline void tavorevb_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
static void __init tavorevb_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
platform_device_register(&smc91x_device);
+
+ tavorevb_init_lcd();
+ tavorevb_init_keypad();
}
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index ef4ddf9..0016241 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -24,7 +24,6 @@
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
-#include <asm/mach-types.h>
/*
* This is PXA's sched_clock implementation. This has a resolution
@@ -151,18 +150,11 @@ static struct irqaction pxa_ost0_irq = {
static void __init pxa_timer_init(void)
{
- unsigned long clock_tick_rate;
+ unsigned long clock_tick_rate = get_clock_tick_rate();
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- if (cpu_is_pxa25x())
- clock_tick_rate = 3686400;
- else if (machine_is_mainstone())
- clock_tick_rate = 3249600;
- else
- clock_tick_rate = 3250000;
-
set_oscr2ns_scale(clock_tick_rate);
ckevt_pxa_osmr0.mult =
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index b70846c..6071182 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -59,6 +59,10 @@
# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
# define __PREG(x) (io_v2p((unsigned long)&(x)))
+static inline unsigned long get_clock_tick_rate(void)
+{
+ return 3686400;
+}
#else
# define __REG(x) io_p2v(x)
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 66a9bb8..d26a5f8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -38,11 +38,11 @@
#include <mach/pxa-regs.h>
#endif
-#define TIMER_FREQ CLOCK_TICK_RATE
#define RTC_DEF_DIVIDER 32768 - 1
#define RTC_DEF_TRIM 0
static unsigned long rtc_freq = 1024;
+static unsigned long timer_freq;
static struct rtc_time rtc_alarm;
static DEFINE_SPINLOCK(sa1100_rtc_lock);
@@ -157,7 +157,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF);
if (rtc_timer1_count == 1)
- rtc_timer1_count = (rtc_freq * ((1<<30)/(TIMER_FREQ>>2)));
+ rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2)));
return IRQ_HANDLED;
}
@@ -166,7 +166,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
{
if (data & RTC_PF) {
/* interpolate missed periods and set match for the next */
- unsigned long period = TIMER_FREQ/rtc_freq;
+ unsigned long period = timer_freq / rtc_freq;
unsigned long oscr = OSCR;
unsigned long osmr1 = OSMR1;
unsigned long missed = (oscr - osmr1)/period;
@@ -263,7 +263,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
return 0;
case RTC_PIE_ON:
spin_lock_irq(&sa1100_rtc_lock);
- OSMR1 = TIMER_FREQ/rtc_freq + OSCR;
+ OSMR1 = timer_freq / rtc_freq + OSCR;
OIER |= OIER_E1;
rtc_timer1_count = 1;
spin_unlock_irq(&sa1100_rtc_lock);
@@ -271,7 +271,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
case RTC_IRQP_READ:
return put_user(rtc_freq, (unsigned long *)arg);
case RTC_IRQP_SET:
- if (arg < 1 || arg > TIMER_FREQ)
+ if (arg < 1 || arg > timer_freq)
return -EINVAL;
rtc_freq = arg;
return 0;
@@ -352,6 +352,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
+ timer_freq = get_clock_tick_rate();
+
/*
* According to the manual we should be able to let RTTR be zero
* and then a default diviser for a 32.768KHz clock is used.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2373018..bc2645d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1817,6 +1817,11 @@ config FB_PXA
If unsure, say N.
+config FB_PXA_OVERLAY
+ bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+ default n
+ depends on FB_PXA && (PXA27x || PXA3xx)
+
config FB_PXA_SMARTPANEL
bool "PXA Smartpanel LCD support"
default n
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index d0fd22e..48ff701 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -20,6 +20,16 @@
*
* linux-arm-kernel@lists.arm.linux.org.uk
*
+ * Add support for overlay1 and overlay2 based on pxafb_overlay.c:
+ *
+ * Copyright (C) 2004, Intel Corporation
+ *
+ * 2003/08/27: <yu.tang@intel.com>
+ * 2004/03/10: <stanley.cai@intel.com>
+ * 2004/10/28: <yan.yin@intel.com>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * All Rights Reserved
*/
#include <linux/module.h>
@@ -66,11 +76,16 @@
LCCR0_SFM | LCCR0_LDM | LCCR0_ENB)
#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\
- LCCR3_PCD | LCCR3_BPP)
+ LCCR3_PCD | LCCR3_BPP(0xf))
static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *);
static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
+static void setup_base_frame(struct pxafb_info *fbi, int branch);
+static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
+ unsigned long offset, size_t size);
+
+static unsigned long video_mem_size = 0;
static inline unsigned long
lcd_readl(struct pxafb_info *fbi, unsigned int off)
@@ -152,6 +167,12 @@ pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
val |= ((blue >> 8) & 0x000000fc);
((u32 *)(fbi->palette_cpu))[regno] = val;
break;
+ case LCCR4_PAL_FOR_3:
+ val = ((red << 8) & 0x00ff0000);
+ val |= ((green >> 0) & 0x0000ff00);
+ val |= ((blue >> 8) & 0x000000ff);
+ ((u32 *)(fbi->palette_cpu))[regno] = val;
+ break;
}
return 0;
@@ -212,37 +233,110 @@ pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
return ret;
}
-/*
- * pxafb_bpp_to_lccr3():
- * Convert a bits per pixel value to the correct bit pattern for LCCR3
- */
-static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
+/* calculate pixel depth, transparency bit included, >=16bpp formats _only_ */
+static inline int var_to_depth(struct fb_var_screeninfo *var)
{
- int ret = 0;
+ return var->red.length + var->green.length +
+ var->blue.length + var->transp.length;
+}
+
+/* calculate 4-bit BPP value for LCCR3 and OVLxC1 */
+static int pxafb_var_to_bpp(struct fb_var_screeninfo *var)
+{
+ int bpp = -EINVAL;
+
switch (var->bits_per_pixel) {
- case 1: ret = LCCR3_1BPP; break;
- case 2: ret = LCCR3_2BPP; break;
- case 4: ret = LCCR3_4BPP; break;
- case 8: ret = LCCR3_8BPP; break;
- case 16: ret = LCCR3_16BPP; break;
+ case 1: bpp = 0; break;
+ case 2: bpp = 1; break;
+ case 4: bpp = 2; break;
+ case 8: bpp = 3; break;
+ case 16: bpp = 4; break;
case 24:
- switch (var->red.length + var->green.length +
- var->blue.length + var->transp.length) {
- case 18: ret = LCCR3_18BPP_P | LCCR3_PDFOR_3; break;
- case 19: ret = LCCR3_19BPP_P; break;
+ switch (var_to_depth(var)) {
+ case 18: bpp = 6; break; /* 18-bits/pixel packed */
+ case 19: bpp = 8; break; /* 19-bits/pixel packed */
+ case 24: bpp = 9; break;
}
break;
case 32:
- switch (var->red.length + var->green.length +
- var->blue.length + var->transp.length) {
- case 18: ret = LCCR3_18BPP | LCCR3_PDFOR_3; break;
- case 19: ret = LCCR3_19BPP; break;
- case 24: ret = LCCR3_24BPP | LCCR3_PDFOR_3; break;
- case 25: ret = LCCR3_25BPP; break;
+ switch (var_to_depth(var)) {
+ case 18: bpp = 5; break; /* 18-bits/pixel unpacked */
+ case 19: bpp = 7; break; /* 19-bits/pixel unpacked */
+ case 25: bpp = 10; break;
}
break;
}
- return ret;
+ return bpp;
+}
+
+/*
+ * pxafb_var_to_lccr3():
+ * Convert a bits per pixel value to the correct bit pattern for LCCR3
+ *
+ * NOTE: for PXA27x with overlays support, the LCCR3_PDFOR_x bits have an
+ * implication of the acutal use of transparency bit, which we handle it
+ * here separatedly. See PXA27x Developer's Manual, Section <<7.4.6 Pixel
+ * Formats>> for the valid combination of PDFOR, PAL_FOR for various BPP.
+ *
+ * Transparency for palette pixel formats is not supported at the moment.
+ */
+static uint32_t pxafb_var_to_lccr3(struct fb_var_screeninfo *var)
+{
+ int bpp = pxafb_var_to_bpp(var);
+ uint32_t lccr3;
+
+ if (bpp < 0)
+ return 0;
+
+ lccr3 = LCCR3_BPP(bpp);
+
+ switch (var_to_depth(var)) {
+ case 16: lccr3 |= var->transp.length ? LCCR3_PDFOR_3 : 0; break;
+ case 18: lccr3 |= LCCR3_PDFOR_3; break;
+ case 24: lccr3 |= var->transp.length ? LCCR3_PDFOR_2 : LCCR3_PDFOR_3;
+ break;
+ case 19:
+ case 25: lccr3 |= LCCR3_PDFOR_0; break;
+ }
+ return lccr3;
+}
+
+#define SET_PIXFMT(v, r, g, b, t) \
+({ \
+ (v)->transp.offset = (t) ? (r) + (g) + (b) : 0; \
+ (v)->transp.length = (t) ? (t) : 0; \
+ (v)->blue.length = (b); (v)->blue.offset = 0; \
+ (v)->green.length = (g); (v)->green.offset = (b); \
+ (v)->red.length = (r); (v)->red.offset = (b) + (g); \
+})
+
+/* set the RGBT bitfields of fb_var_screeninf according to
+ * var->bits_per_pixel and given depth
+ */
+static void pxafb_set_pixfmt(struct fb_var_screeninfo *var, int depth)
+{
+ if (depth == 0)
+ depth = var->bits_per_pixel;
+
+ if (var->bits_per_pixel < 16) {
+ /* indexed pixel formats */
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 0; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 8;
+ }
+
+ switch (depth) {
+ case 16: var->transp.length ?
+ SET_PIXFMT(var, 5, 5, 5, 1) : /* RGBT555 */
+ SET_PIXFMT(var, 5, 6, 5, 0); break; /* RGB565 */
+ case 18: SET_PIXFMT(var, 6, 6, 6, 0); break; /* RGB666 */
+ case 19: SET_PIXFMT(var, 6, 6, 6, 1); break; /* RGBT666 */
+ case 24: var->transp.length ?
+ SET_PIXFMT(var, 8, 8, 7, 1) : /* RGBT887 */
+ SET_PIXFMT(var, 8, 8, 8, 0); break; /* RGB888 */
+ case 25: SET_PIXFMT(var, 8, 8, 8, 1); break; /* RGBT888 */
+ }
}
#ifdef CONFIG_CPU_FREQ
@@ -304,8 +398,49 @@ static void pxafb_setmode(struct fb_var_screeninfo *var,
var->lower_margin = mode->lower_margin;
var->sync = mode->sync;
var->grayscale = mode->cmap_greyscale;
- var->xres_virtual = var->xres;
- var->yres_virtual = var->yres;
+
+ /* set the initial RGBA bitfields */
+ pxafb_set_pixfmt(var, mode->depth);
+}
+
+static int pxafb_adjust_timing(struct pxafb_info *fbi,
+ struct fb_var_screeninfo *var)
+{
+ int line_length;
+
+ var->xres = max_t(int, var->xres, MIN_XRES);
+ var->yres = max_t(int, var->yres, MIN_YRES);
+
+ if (!(fbi->lccr0 & LCCR0_LCDT)) {
+ clamp_val(var->hsync_len, 1, 64);
+ clamp_val(var->vsync_len, 1, 64);
+ clamp_val(var->left_margin, 1, 255);
+ clamp_val(var->right_margin, 1, 255);
+ clamp_val(var->upper_margin, 1, 255);
+ clamp_val(var->lower_margin, 1, 255);
+ }
+
+ /* make sure each line is aligned on word boundary */
+ line_length = var->xres * var->bits_per_pixel / 8;
+ line_length = ALIGN(line_length, 4);
+ var->xres = line_length * 8 / var->bits_per_pixel;
+
+ /* we don't support xpan, force xres_virtual to be equal to xres */
+ var->xres_virtual = var->xres;
+
+ if (var->accel_flags & FB_ACCELF_TEXT)
+ var->yres_virtual = fbi->fb.fix.smem_len / line_length;
+ else
+ var->yres_virtual = max(var->yres_virtual, var->yres);
+
+ /* check for limits */
+ if (var->xres > MAX_XRES || var->yres > MAX_YRES)
+ return -EINVAL;
+
+ if (var->yres > var->yres_virtual)
+ return -EINVAL;
+
+ return 0;
}
/*
@@ -321,11 +456,7 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct pxafb_info *fbi = (struct pxafb_info *)info;
struct pxafb_mach_info *inf = fbi->dev->platform_data;
-
- if (var->xres < MIN_XRES)
- var->xres = MIN_XRES;
- if (var->yres < MIN_YRES)
- var->yres = MIN_YRES;
+ int err;
if (inf->fixed_modes) {
struct pxafb_mode_info *mode;
@@ -334,74 +465,18 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
if (!mode)
return -EINVAL;
pxafb_setmode(var, mode);
- } else {
- if (var->xres > inf->modes->xres)
- return -EINVAL;
- if (var->yres > inf->modes->yres)
- return -EINVAL;
- if (var->bits_per_pixel > inf->modes->bpp)
- return -EINVAL;
}
- var->xres_virtual =
- max(var->xres_virtual, var->xres);
- var->yres_virtual =
- max(var->yres_virtual, var->yres);
+ /* do a test conversion to BPP fields to check the color formats */
+ err = pxafb_var_to_bpp(var);
+ if (err < 0)
+ return err;
- /*
- * Setup the RGB parameters for this display.
- *
- * The pixel packing format is described on page 7-11 of the
- * PXA2XX Developer's Manual.
- */
- if (var->bits_per_pixel == 16) {
- var->red.offset = 11; var->red.length = 5;
- var->green.offset = 5; var->green.length = 6;
- var->blue.offset = 0; var->blue.length = 5;
- var->transp.offset = var->transp.length = 0;
- } else if (var->bits_per_pixel > 16) {
- struct pxafb_mode_info *mode;
-
- mode = pxafb_getmode(inf, var);
- if (!mode)
- return -EINVAL;
+ pxafb_set_pixfmt(var, var_to_depth(var));
- switch (mode->depth) {
- case 18: /* RGB666 */
- var->transp.offset = var->transp.length = 0;
- var->red.offset = 12; var->red.length = 6;
- var->green.offset = 6; var->green.length = 6;
- var->blue.offset = 0; var->blue.length = 6;
- break;
- case 19: /* RGBT666 */
- var->transp.offset = 18; var->transp.length = 1;
- var->red.offset = 12; var->red.length = 6;
- var->green.offset = 6; var->green.length = 6;
- var->blue.offset = 0; var->blue.length = 6;
- break;
- case 24: /* RGB888 */
- var->transp.offset = var->transp.length = 0;
- var->red.offset = 16; var->red.length = 8;
- var->green.offset = 8; var->green.length = 8;
- var->blue.offset = 0; var->blue.length = 8;
- break;
- case 25: /* RGBT888 */
- var->transp.offset = 24; var->transp.length = 1;
- var->red.offset = 16; var->red.length = 8;
- var->green.offset = 8; var->green.length = 8;
- var->blue.offset = 0; var->blue.length = 8;
- break;
- default:
- return -EINVAL;
- }
- } else {
- var->red.offset = var->green.offset = 0;
- var->blue.offset = var->transp.offset = 0;
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->transp.length = 0;
- }
+ err = pxafb_adjust_timing(fbi, var);
+ if (err)
+ return err;
#ifdef CONFIG_CPU_FREQ
pr_debug("pxafb: dma period = %d ps\n",
@@ -411,11 +486,6 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
return 0;
}
-static inline void pxafb_set_truecolor(u_int is_true_color)
-{
- /* do your machine-specific setup if needed */
-}
-
/*
* pxafb_set_par():
* Set the user defined part of the display for the specified console
@@ -448,11 +518,6 @@ static int pxafb_set_par(struct fb_info *info)
fbi->palette_cpu = (u16 *)&fbi->dma_buff->palette[0];
- /*
- * Set (any) board control register to handle new color depth
- */
- pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
-
if (fbi->fb.var.bits_per_pixel >= 16)
fb_dealloc_cmap(&fbi->fb.cmap);
else
@@ -463,6 +528,24 @@ static int pxafb_set_par(struct fb_info *info)
return 0;
}
+static int pxafb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ int dma = DMA_MAX + DMA_BASE;
+
+ if (fbi->state != C_ENABLE)
+ return 0;
+
+ setup_base_frame(fbi, 1);
+
+ if (fbi->lccr0 & LCCR0_SDS)
+ lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
+
+ lcd_writel(fbi, FBR0, fbi->fdadr[dma] | 0x1);
+ return 0;
+}
+
/*
* pxafb_blank():
* Blank the display by setting all palette values to zero. Note, the
@@ -498,32 +581,342 @@ static int pxafb_blank(int blank, struct fb_info *info)
return 0;
}
-static int pxafb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- struct pxafb_info *fbi = (struct pxafb_info *)info;
- unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
-
- if (off < info->fix.smem_len) {
- vma->vm_pgoff += fbi->video_offset / PAGE_SIZE;
- return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
- fbi->map_dma, fbi->map_size);
- }
- return -EINVAL;
-}
-
static struct fb_ops pxafb_ops = {
.owner = THIS_MODULE,
.fb_check_var = pxafb_check_var,
.fb_set_par = pxafb_set_par,
+ .fb_pan_display = pxafb_pan_display,
.fb_setcolreg = pxafb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = pxafb_blank,
- .fb_mmap = pxafb_mmap,
};
+#ifdef CONFIG_FB_PXA_OVERLAY
+static void overlay1fb_setup(struct pxafb_layer *ofb)
+{
+ int size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
+ unsigned long start = ofb->video_mem_phys;
+ setup_frame_dma(ofb->fbi, DMA_OV1, PAL_NONE, start, size);
+}
+
+/* Depending on the enable status of overlay1/2, the DMA should be
+ * updated from FDADRx (when disabled) or FBRx (when enabled).
+ */
+static void overlay1fb_enable(struct pxafb_layer *ofb)
+{
+ int enabled = lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN;
+ uint32_t fdadr1 = ofb->fbi->fdadr[DMA_OV1] | (enabled ? 0x1 : 0);
+
+ lcd_writel(ofb->fbi, enabled ? FBR1 : FDADR1, fdadr1);
+ lcd_writel(ofb->fbi, OVL1C2, ofb->control[1]);
+ lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] | OVLxC1_OEN);
+}
+
+static void overlay1fb_disable(struct pxafb_layer *ofb)
+{
+ uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+
+ lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
+
+ lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(1));
+ lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(1));
+ lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3);
+
+ if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
+ pr_warning("%s: timeout disabling overlay1\n", __func__);
+
+ lcd_writel(ofb->fbi, LCCR5, lccr5);
+}
+
+static void overlay2fb_setup(struct pxafb_layer *ofb)
+{
+ int size, div = 1, pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
+ unsigned long start[3] = { ofb->video_mem_phys, 0, 0 };
+
+ if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) {
+ size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
+ setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size);
+ } else {
+ size = ofb->fb.var.xres_virtual * ofb->fb.var.yres_virtual;
+ switch (pfor) {
+ case OVERLAY_FORMAT_YUV444_PLANAR: div = 1; break;
+ case OVERLAY_FORMAT_YUV422_PLANAR: div = 2; break;
+ case OVERLAY_FORMAT_YUV420_PLANAR: div = 4; break;
+ }
+ start[1] = start[0] + size;
+ start[2] = start[1] + size / div;
+ setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size);
+ setup_frame_dma(ofb->fbi, DMA_OV2_Cb, -1, start[1], size / div);
+ setup_frame_dma(ofb->fbi, DMA_OV2_Cr, -1, start[2], size / div);
+ }
+}
+
+static void overlay2fb_enable(struct pxafb_layer *ofb)
+{
+ int pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
+ int enabled = lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN;
+ uint32_t fdadr2 = ofb->fbi->fdadr[DMA_OV2_Y] | (enabled ? 0x1 : 0);
+ uint32_t fdadr3 = ofb->fbi->fdadr[DMA_OV2_Cb] | (enabled ? 0x1 : 0);
+ uint32_t fdadr4 = ofb->fbi->fdadr[DMA_OV2_Cr] | (enabled ? 0x1 : 0);
+
+ if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED)
+ lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
+ else {
+ lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
+ lcd_writel(ofb->fbi, enabled ? FBR3 : FDADR3, fdadr3);
+ lcd_writel(ofb->fbi, enabled ? FBR4 : FDADR4, fdadr4);
+ }
+ lcd_writel(ofb->fbi, OVL2C2, ofb->control[1]);
+ lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] | OVLxC1_OEN);
+}
+
+static void overlay2fb_disable(struct pxafb_layer *ofb)
+{
+ uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+
+ lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
+
+ lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(2));
+ lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(2));
+ lcd_writel(ofb->fbi, FBR2, ofb->fbi->fdadr[DMA_OV2_Y] | 0x3);
+ lcd_writel(ofb->fbi, FBR3, ofb->fbi->fdadr[DMA_OV2_Cb] | 0x3);
+ lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3);
+
+ if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
+ pr_warning("%s: timeout disabling overlay2\n", __func__);
+}
+
+static struct pxafb_layer_ops ofb_ops[] = {
+ [0] = {
+ .enable = overlay1fb_enable,
+ .disable = overlay1fb_disable,
+ .setup = overlay1fb_setup,
+ },
+ [1] = {
+ .enable = overlay2fb_enable,
+ .disable = overlay2fb_disable,
+ .setup = overlay2fb_setup,
+ },
+};
+
+static int overlayfb_open(struct fb_info *info, int user)
+{
+ struct pxafb_layer *ofb = (struct pxafb_layer *)info;
+
+ /* no support for framebuffer console on overlay */
+ if (user == 0)
+ return -ENODEV;
+
+ /* allow only one user at a time */
+ if (atomic_inc_and_test(&ofb->usage))
+ return -EBUSY;
+
+ /* unblank the base framebuffer */
+ fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
+ return 0;
+}
+
+static int overlayfb_release(struct fb_info *info, int user)
+{
+ struct pxafb_layer *ofb = (struct pxafb_layer*) info;
+
+ atomic_dec(&ofb->usage);
+ ofb->ops->disable(ofb);
+
+ free_pages_exact(ofb->video_mem, ofb->video_mem_size);
+ ofb->video_mem = NULL;
+ ofb->video_mem_size = 0;
+ return 0;
+}
+
+static int overlayfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct pxafb_layer *ofb = (struct pxafb_layer *)info;
+ struct fb_var_screeninfo *base_var = &ofb->fbi->fb.var;
+ int xpos, ypos, pfor, bpp;
+
+ xpos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_XPOS(var->nonstd);
+ pfor = NONSTD_TO_PFOR(var->nonstd);
+
+ bpp = pxafb_var_to_bpp(var);
+ if (bpp < 0)
+ return -EINVAL;
+
+ /* no support for YUV format on overlay1 */
+ if (ofb->id == OVERLAY1 && pfor != 0)
+ return -EINVAL;
+
+ /* for YUV packed formats, bpp = 'minimum bpp of YUV components' */
+ switch (pfor) {
+ case OVERLAY_FORMAT_RGB:
+ bpp = pxafb_var_to_bpp(var);
+ if (bpp < 0)
+ return -EINVAL;
+
+ pxafb_set_pixfmt(var, var_to_depth(var));
+ break;
+ case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
+ case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 8; break;
+ case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 4; break;
+ case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 2; break;
+ default:
+ return -EINVAL;
+ }
+
+ /* each line must start at a 32-bit word boundary */
+ if ((xpos * bpp) % 32)
+ return -EINVAL;
+
+ /* xres must align on 32-bit word boundary */
+ var->xres = roundup(var->xres * bpp, 32) / bpp;
+
+ if ((xpos + var->xres > base_var->xres) ||
+ (ypos + var->yres > base_var->yres))
+ return -EINVAL;
+
+ var->xres_virtual = var->xres;
+ var->yres_virtual = max(var->yres, var->yres_virtual);
+ return 0;
+}
+
+static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
+{
+ struct fb_var_screeninfo *var = &ofb->fb.var;
+ int pfor = NONSTD_TO_PFOR(var->nonstd);
+ int size, bpp = 0;
+
+ switch (pfor) {
+ case OVERLAY_FORMAT_RGB: bpp = var->bits_per_pixel; break;
+ case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
+ case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 24; break;
+ case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 16; break;
+ case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 12; break;
+ }
+
+ ofb->fb.fix.line_length = var->xres_virtual * bpp / 8;
+
+ size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
+
+ /* don't re-allocate if the original video memory is enough */
+ if (ofb->video_mem) {
+ if (ofb->video_mem_size >= size)
+ return 0;
+
+ free_pages_exact(ofb->video_mem, ofb->video_mem_size);
+ }
+
+ ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
+ if (ofb->video_mem == NULL)
+ return -ENOMEM;
+
+ ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+ ofb->video_mem_size = size;
+
+ ofb->fb.fix.smem_start = ofb->video_mem_phys;
+ ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
+ ofb->fb.screen_base = ofb->video_mem;
+ return 0;
+}
+
+static int overlayfb_set_par(struct fb_info *info)
+{
+ struct pxafb_layer *ofb = (struct pxafb_layer *)info;
+ struct fb_var_screeninfo *var = &info->var;
+ int xpos, ypos, pfor, bpp, ret;
+
+ ret = overlayfb_map_video_memory(ofb);
+ if (ret)
+ return ret;
+
+ bpp = pxafb_var_to_bpp(var);
+ xpos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_XPOS(var->nonstd);
+ pfor = NONSTD_TO_PFOR(var->nonstd);
+
+ ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
+ OVLxC1_BPP(bpp);
+ ofb->control[1] = OVLxC2_XPOS(xpos) | OVLxC2_YPOS(ypos);
+
+ if (ofb->id == OVERLAY2)
+ ofb->control[1] |= OVL2C2_PFOR(pfor);
+
+ ofb->ops->setup(ofb);
+ ofb->ops->enable(ofb);
+ return 0;
+}
+
+static struct fb_ops overlay_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = overlayfb_open,
+ .fb_release = overlayfb_release,
+ .fb_check_var = overlayfb_check_var,
+ .fb_set_par = overlayfb_set_par,
+};
+
+static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
+ struct pxafb_layer *ofb, int id)
+{
+ sprintf(ofb->fb.fix.id, "overlay%d", id + 1);
+
+ ofb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ ofb->fb.fix.xpanstep = 0;
+ ofb->fb.fix.ypanstep = 1;
+
+ ofb->fb.var.activate = FB_ACTIVATE_NOW;
+ ofb->fb.var.height = -1;
+ ofb->fb.var.width = -1;
+ ofb->fb.var.vmode = FB_VMODE_NONINTERLACED;
+
+ ofb->fb.fbops = &overlay_fb_ops;
+ ofb->fb.flags = FBINFO_FLAG_DEFAULT;
+ ofb->fb.node = -1;
+ ofb->fb.pseudo_palette = NULL;
+
+ ofb->id = id;
+ ofb->ops = &ofb_ops[id];
+ atomic_set(&ofb->usage, 0);
+ ofb->fbi = fbi;
+ init_completion(&ofb->branch_done);
+}
+
+static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
+{
+ int i, ret;
+
+ for (i = 0; i < 2; i++) {
+ init_pxafb_overlay(fbi, &fbi->overlay[i], i);
+ ret = register_framebuffer(&fbi->overlay[i].fb);
+ if (ret) {
+ dev_err(fbi->dev, "failed to register overlay %d\n", i);
+ return ret;
+ }
+ }
+
+ /* mask all IU/BS/EOF/SOF interrupts */
+ lcd_writel(fbi, LCCR5, ~0);
+
+ /* place overlay(s) on top of base */
+ fbi->lccr0 |= LCCR0_OUC;
+ pr_info("PXA Overlay driver loaded successfully!\n");
+ return 0;
+}
+
+static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
+{
+ int i;
+
+ for (i = 0; i < 2; i++)
+ unregister_framebuffer(&fbi->overlay[i].fb);
+}
+#else
+static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
+static inline void pxafb_overlay_exit(struct pxafb_info *fbi) {}
+#endif /* CONFIG_FB_PXA_OVERLAY */
+
/*
* Calculate the PCD value from the clock rate (in picoseconds).
* We take account of the PPCR clock setting.
@@ -603,22 +996,22 @@ unsigned long pxafb_get_hsync_time(struct device *dev)
EXPORT_SYMBOL(pxafb_get_hsync_time);
static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
- unsigned int offset, size_t size)
+ unsigned long start, size_t size)
{
struct pxafb_dma_descriptor *dma_desc, *pal_desc;
unsigned int dma_desc_off, pal_desc_off;
- if (dma < 0 || dma >= DMA_MAX)
+ if (dma < 0 || dma >= DMA_MAX * 2)
return -EINVAL;
dma_desc = &fbi->dma_buff->dma_desc[dma];
dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]);
- dma_desc->fsadr = fbi->screen_dma + offset;
+ dma_desc->fsadr = start;
dma_desc->fidr = 0;
dma_desc->ldcmd = size;
- if (pal < 0 || pal >= PAL_MAX) {
+ if (pal < 0 || pal >= PAL_MAX * 2) {
dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
} else {
@@ -644,6 +1037,27 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
return 0;
}
+static void setup_base_frame(struct pxafb_info *fbi, int branch)
+{
+ struct fb_var_screeninfo *var = &fbi->fb.var;
+ struct fb_fix_screeninfo *fix = &fbi->fb.fix;
+ int nbytes, dma, pal, bpp = var->bits_per_pixel;
+ unsigned long offset;
+
+ dma = DMA_BASE + (branch ? DMA_MAX : 0);
+ pal = (bpp >= 16) ? PAL_NONE : PAL_BASE + (branch ? PAL_MAX : 0);
+
+ nbytes = fix->line_length * var->yres;
+ offset = fix->line_length * var->yoffset + fbi->video_mem_phys;
+
+ if (fbi->lccr0 & LCCR0_SDS) {
+ nbytes = nbytes / 2;
+ setup_frame_dma(fbi, dma + 1, PAL_NONE, offset + nbytes, nbytes);
+ }
+
+ setup_frame_dma(fbi, dma, pal, offset, nbytes);
+}
+
#ifdef CONFIG_FB_PXA_SMARTPANEL
static int setup_smart_dma(struct pxafb_info *fbi)
{
@@ -697,6 +1111,7 @@ int pxafb_smart_flush(struct fb_info *info)
lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
+ lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
lcd_writel(fbi, FDADR6, fbi->fdadr[6]);
@@ -891,51 +1306,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *fbi)
{
u_long flags;
- size_t nbytes;
-#if DEBUG_VAR
- if (!(fbi->lccr0 & LCCR0_LCDT)) {
- if (var->xres < 16 || var->xres > 1024)
- printk(KERN_ERR "%s: invalid xres %d\n",
- fbi->fb.fix.id, var->xres);
- switch (var->bits_per_pixel) {
- case 1:
- case 2:
- case 4:
- case 8:
- case 16:
- case 24:
- case 32:
- break;
- default:
- printk(KERN_ERR "%s: invalid bit depth %d\n",
- fbi->fb.fix.id, var->bits_per_pixel);
- break;
- }
-
- if (var->hsync_len < 1 || var->hsync_len > 64)
- printk(KERN_ERR "%s: invalid hsync_len %d\n",
- fbi->fb.fix.id, var->hsync_len);
- if (var->left_margin < 1 || var->left_margin > 255)
- printk(KERN_ERR "%s: invalid left_margin %d\n",
- fbi->fb.fix.id, var->left_margin);
- if (var->right_margin < 1 || var->right_margin > 255)
- printk(KERN_ERR "%s: invalid right_margin %d\n",
- fbi->fb.fix.id, var->right_margin);
- if (var->yres < 1 || var->yres > 1024)
- printk(KERN_ERR "%s: invalid yres %d\n",
- fbi->fb.fix.id, var->yres);
- if (var->vsync_len < 1 || var->vsync_len > 64)
- printk(KERN_ERR "%s: invalid vsync_len %d\n",
- fbi->fb.fix.id, var->vsync_len);
- if (var->upper_margin < 0 || var->upper_margin > 255)
- printk(KERN_ERR "%s: invalid upper_margin %d\n",
- fbi->fb.fix.id, var->upper_margin);
- if (var->lower_margin < 0 || var->lower_margin > 255)
- printk(KERN_ERR "%s: invalid lower_margin %d\n",
- fbi->fb.fix.id, var->lower_margin);
- }
-#endif
/* Update shadow copy atomically */
local_irq_save(flags);
@@ -946,23 +1317,13 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
#endif
setup_parallel_timing(fbi, var);
+ setup_base_frame(fbi, 0);
+
fbi->reg_lccr0 = fbi->lccr0 |
(LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
LCCR0_QDM | LCCR0_BM | LCCR0_OUM);
- fbi->reg_lccr3 |= pxafb_bpp_to_lccr3(var);
-
- nbytes = var->yres * fbi->fb.fix.line_length;
-
- if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual) {
- nbytes = nbytes / 2;
- setup_frame_dma(fbi, DMA_LOWER, PAL_NONE, nbytes, nbytes);
- }
-
- if ((var->bits_per_pixel >= 16) || (fbi->lccr0 & LCCR0_LCDT))
- setup_frame_dma(fbi, DMA_BASE, PAL_NONE, 0, nbytes);
- else
- setup_frame_dma(fbi, DMA_BASE, PAL_BASE, 0, nbytes);
+ fbi->reg_lccr3 |= pxafb_var_to_lccr3(var);
fbi->reg_lccr4 = lcd_readl(fbi, LCCR4) & ~LCCR4_PAL_FOR_MASK;
fbi->reg_lccr4 |= (fbi->lccr4 & LCCR4_PAL_FOR_MASK);
@@ -976,6 +1337,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
(lcd_readl(fbi, LCCR1) != fbi->reg_lccr1) ||
(lcd_readl(fbi, LCCR2) != fbi->reg_lccr2) ||
(lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
+ (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
(lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
(lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
pxafb_schedule_work(fbi, C_REENABLE);
@@ -1022,6 +1384,7 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
return;
/* Sequence from 11.7.10 */
+ lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
@@ -1063,8 +1426,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
{
struct pxafb_info *fbi = dev_id;
- unsigned int lccr0, lcsr = lcd_readl(fbi, LCSR);
+ unsigned int lccr0, lcsr, lcsr1;
+ lcsr = lcd_readl(fbi, LCSR);
if (lcsr & LCSR_LDD) {
lccr0 = lcd_readl(fbi, LCCR0);
lcd_writel(fbi, LCCR0, lccr0 | LCCR0_LDM);
@@ -1075,8 +1439,18 @@ static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
if (lcsr & LCSR_CMD_INT)
complete(&fbi->command_done);
#endif
-
lcd_writel(fbi, LCSR, lcsr);
+
+#ifdef CONFIG_FB_PXA_OVERLAY
+ lcsr1 = lcd_readl(fbi, LCSR1);
+ if (lcsr1 & LCSR1_BS(1))
+ complete(&fbi->overlay[0].branch_done);
+
+ if (lcsr1 & LCSR1_BS(2))
+ complete(&fbi->overlay[1].branch_done);
+
+ lcd_writel(fbi, LCSR1, lcsr1);
+#endif
return IRQ_HANDLED;
}
@@ -1267,72 +1641,34 @@ static int pxafb_resume(struct platform_device *dev)
#define pxafb_resume NULL
#endif
-/*
- * pxafb_map_video_memory():
- * Allocates the DRAM memory for the frame buffer. This buffer is
- * remapped into a non-cached, non-buffered, memory region to
- * allow palette and pixel writes to occur without flushing the
- * cache. Once this area is remapped, all virtual memory
- * access to the video memory should occur at the new region.
- */
-static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
+static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
{
- /*
- * We reserve one page for the palette, plus the size
- * of the framebuffer.
- */
- fbi->video_offset = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
- fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset);
- fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
- &fbi->map_dma, GFP_KERNEL);
-
- if (fbi->map_cpu) {
- /* prevent initial garbage on screen */
- memset(fbi->map_cpu, 0, fbi->map_size);
- fbi->fb.screen_base = fbi->map_cpu + fbi->video_offset;
- fbi->screen_dma = fbi->map_dma + fbi->video_offset;
-
- /*
- * FIXME: this is actually the wrong thing to place in
- * smem_start. But fbdev suffers from the problem that
- * it needs an API which doesn't exist (in this case,
- * dma_writecombine_mmap)
- */
- fbi->fb.fix.smem_start = fbi->screen_dma;
- fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
-
- fbi->dma_buff = (void *) fbi->map_cpu;
- fbi->dma_buff_phys = fbi->map_dma;
- fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
+ int size = PAGE_ALIGN(fbi->video_mem_size);
- pr_debug("pxafb: palette_mem_size = 0x%08x\n", fbi->palette_size*sizeof(u16));
- }
+ fbi->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
+ if (fbi->video_mem == NULL)
+ return -ENOMEM;
- return fbi->map_cpu ? 0 : -ENOMEM;
-}
+ fbi->video_mem_phys = virt_to_phys(fbi->video_mem);
+ fbi->video_mem_size = size;
-static void pxafb_decode_mode_info(struct pxafb_info *fbi,
- struct pxafb_mode_info *modes,
- unsigned int num_modes)
-{
- unsigned int i, smemlen;
+ fbi->fb.fix.smem_start = fbi->video_mem_phys;
+ fbi->fb.fix.smem_len = fbi->video_mem_size;
+ fbi->fb.screen_base = fbi->video_mem;
- pxafb_setmode(&fbi->fb.var, &modes[0]);
-
- for (i = 0; i < num_modes; i++) {
- smemlen = modes[i].xres * modes[i].yres * modes[i].bpp / 8;
- if (smemlen > fbi->fb.fix.smem_len)
- fbi->fb.fix.smem_len = smemlen;
- }
+ return fbi->video_mem ? 0 : -ENOMEM;
}
static void pxafb_decode_mach_info(struct pxafb_info *fbi,
struct pxafb_mach_info *inf)
{
unsigned int lcd_conn = inf->lcd_conn;
+ struct pxafb_mode_info *m;
+ int i;
fbi->cmap_inverse = inf->cmap_inverse;
fbi->cmap_static = inf->cmap_static;
+ fbi->lccr4 = inf->lccr4;
switch (lcd_conn & LCD_TYPE_MASK) {
case LCD_TYPE_MONO_STN:
@@ -1357,7 +1693,6 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
/* fall back to backward compatibility way */
fbi->lccr0 = inf->lccr0;
fbi->lccr3 = inf->lccr3;
- fbi->lccr4 = inf->lccr4;
goto decode_mode;
}
@@ -1371,7 +1706,22 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
decode_mode:
- pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
+ pxafb_setmode(&fbi->fb.var, &inf->modes[0]);
+
+ /* decide video memory size as follows:
+ * 1. default to mode of maximum resolution
+ * 2. allow platform to override
+ * 3. allow module parameter to override
+ */
+ for (i = 0, m = &inf->modes[0]; i < inf->num_modes; i++, m++)
+ fbi->video_mem_size = max_t(size_t, fbi->video_mem_size,
+ m->xres * m->yres * m->bpp / 8);
+
+ if (inf->video_mem_size > fbi->video_mem_size)
+ fbi->video_mem_size = inf->video_mem_size;
+
+ if (video_mem_size > fbi->video_mem_size)
+ fbi->video_mem_size = video_mem_size;
}
static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
@@ -1399,7 +1749,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
fbi->fb.fix.type_aux = 0;
fbi->fb.fix.xpanstep = 0;
- fbi->fb.fix.ypanstep = 0;
+ fbi->fb.fix.ypanstep = 1;
fbi->fb.fix.ywrapstep = 0;
fbi->fb.fix.accel = FB_ACCEL_NONE;
@@ -1407,7 +1757,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
fbi->fb.var.activate = FB_ACTIVATE_NOW;
fbi->fb.var.height = -1;
fbi->fb.var.width = -1;
- fbi->fb.var.accel_flags = 0;
+ fbi->fb.var.accel_flags = FB_ACCELF_TEXT;
fbi->fb.var.vmode = FB_VMODE_NONINTERLACED;
fbi->fb.fbops = &pxafb_ops;
@@ -1499,7 +1849,9 @@ static int __devinit parse_opt(struct device *dev, char *this_opt)
s[0] = '\0';
- if (!strncmp(this_opt, "mode:", 5)) {
+ if (!strncmp(this_opt, "vmem:", 5)) {
+ video_mem_size = memparse(this_opt + 5, NULL);
+ } else if (!strncmp(this_opt, "mode:", 5)) {
return parse_opt_mode(dev, this_opt);
} else if (!strncmp(this_opt, "pixclock:", 9)) {
mode->pixclock = simple_strtoul(this_opt+9, NULL, 0);
@@ -1736,12 +2088,20 @@ static int __devinit pxafb_probe(struct platform_device *dev)
goto failed_free_res;
}
- /* Initialize video memory */
- ret = pxafb_map_video_memory(fbi);
+ fbi->dma_buff_size = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
+ fbi->dma_buff = dma_alloc_coherent(fbi->dev, fbi->dma_buff_size,
+ &fbi->dma_buff_phys, GFP_KERNEL);
+ if (fbi->dma_buff == NULL) {
+ dev_err(&dev->dev, "failed to allocate memory for DMA\n");
+ ret = -ENOMEM;
+ goto failed_free_io;
+ }
+
+ ret = pxafb_init_video_memory(fbi);
if (ret) {
dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
ret = -ENOMEM;
- goto failed_free_io;
+ goto failed_free_dma;
}
irq = platform_get_irq(dev, 0);
@@ -1789,6 +2149,8 @@ static int __devinit pxafb_probe(struct platform_device *dev)
goto failed_free_cmap;
}
+ pxafb_overlay_init(fbi);
+
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = pxafb_freq_transition;
fbi->freq_policy.notifier_call = pxafb_freq_policy;
@@ -1811,8 +2173,10 @@ failed_free_cmap:
failed_free_irq:
free_irq(irq, fbi);
failed_free_mem:
- dma_free_writecombine(&dev->dev, fbi->map_size,
- fbi->map_cpu, fbi->map_dma);
+ free_pages_exact(fbi->video_mem, fbi->video_mem_size);
+failed_free_dma:
+ dma_free_coherent(&dev->dev, fbi->dma_buff_size,
+ fbi->dma_buff, fbi->dma_buff_phys);
failed_free_io:
iounmap(fbi->mmio_base);
failed_free_res:
@@ -1837,6 +2201,7 @@ static int __devexit pxafb_remove(struct platform_device *dev)
info = &fbi->fb;
+ pxafb_overlay_exit(fbi);
unregister_framebuffer(info);
pxafb_disable_controller(fbi);
@@ -1847,8 +2212,10 @@ static int __devexit pxafb_remove(struct platform_device *dev)
irq = platform_get_irq(dev, 0);
free_irq(irq, fbi);
- dma_free_writecombine(&dev->dev, fbi->map_size,
- fbi->map_cpu, fbi->map_dma);
+ free_pages_exact(fbi->video_mem, fbi->video_mem_size);
+
+ dma_free_writecombine(&dev->dev, fbi->dma_buff_size,
+ fbi->dma_buff, fbi->dma_buff_phys);
iounmap(fbi->mmio_base);
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index d8eb93f..2353521 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -54,11 +54,55 @@ enum {
#define PALETTE_SIZE (256 * 4)
#define CMD_BUFF_SIZE (1024 * 50)
+/* NOTE: the palette and frame dma descriptors are doubled to allow
+ * the 2nd set for branch settings (FBRx)
+ */
struct pxafb_dma_buff {
unsigned char palette[PAL_MAX * PALETTE_SIZE];
uint16_t cmd_buff[CMD_BUFF_SIZE];
- struct pxafb_dma_descriptor pal_desc[PAL_MAX];
- struct pxafb_dma_descriptor dma_desc[DMA_MAX];
+ struct pxafb_dma_descriptor pal_desc[PAL_MAX * 2];
+ struct pxafb_dma_descriptor dma_desc[DMA_MAX * 2];
+};
+
+enum {
+ OVERLAY1,
+ OVERLAY2,
+};
+
+enum {
+ OVERLAY_FORMAT_RGB = 0,
+ OVERLAY_FORMAT_YUV444_PACKED,
+ OVERLAY_FORMAT_YUV444_PLANAR,
+ OVERLAY_FORMAT_YUV422_PLANAR,
+ OVERLAY_FORMAT_YUV420_PLANAR,
+};
+
+#define NONSTD_TO_XPOS(x) (((x) >> 0) & 0x3ff)
+#define NONSTD_TO_YPOS(x) (((x) >> 10) & 0x3ff)
+#define NONSTD_TO_PFOR(x) (((x) >> 20) & 0x7)
+
+struct pxafb_layer;
+
+struct pxafb_layer_ops {
+ void (*enable)(struct pxafb_layer *);
+ void (*disable)(struct pxafb_layer *);
+ void (*setup)(struct pxafb_layer *);
+};
+
+struct pxafb_layer {
+ struct fb_info fb;
+ int id;
+ atomic_t usage;
+ uint32_t control[2];
+
+ struct pxafb_layer_ops *ops;
+
+ void __iomem *video_mem;
+ unsigned long video_mem_phys;
+ size_t video_mem_size;
+ struct completion branch_done;
+
+ struct pxafb_info *fbi;
};
struct pxafb_info {
@@ -69,24 +113,15 @@ struct pxafb_info {
void __iomem *mmio_base;
struct pxafb_dma_buff *dma_buff;
+ size_t dma_buff_size;
dma_addr_t dma_buff_phys;
- dma_addr_t fdadr[DMA_MAX];
-
- /*
- * These are the addresses we mapped
- * the framebuffer memory region to.
- */
- /* raw memory addresses */
- dma_addr_t map_dma; /* physical */
- u_char * map_cpu; /* virtual */
- u_int map_size;
-
- /* addresses of pieces placed in raw buffer */
- u_char * screen_cpu; /* virtual address of frame buffer */
- dma_addr_t screen_dma; /* physical address of frame buffer */
+ dma_addr_t fdadr[DMA_MAX * 2];
+
+ void __iomem *video_mem; /* virtual address of frame buffer */
+ unsigned long video_mem_phys; /* physical address of frame buffer */
+ size_t video_mem_size; /* size of the frame buffer */
u16 * palette_cpu; /* virtual address of palette memory */
u_int palette_size;
- ssize_t video_offset;
u_int lccr0;
u_int lccr3;
@@ -120,6 +155,10 @@ struct pxafb_info {
struct task_struct *smart_thread;
#endif
+#ifdef CONFIG_FB_PXA_OVERLAY
+ struct pxafb_layer overlay[2];
+#endif
+
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
struct notifier_block freq_policy;
@@ -151,4 +190,10 @@ struct pxafb_info {
#define MIN_XRES 64
#define MIN_YRES 64
+/* maximum X and Y resolutions - note these are limits from the register
+ * bits length instead of the real ones
+ */
+#define MAX_XRES 1024
+#define MAX_YRES 1024
+
#endif /* __PXAFB_H__ */
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index d6fbb46..e19b457 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -36,8 +36,7 @@
#include <mach/reset.h>
#include <mach/hardware.h>
-#define OSCR_FREQ CLOCK_TICK_RATE
-
+static unsigned long oscr_freq;
static unsigned long sa1100wdt_users;
static int pre_margin;
static int boot_status;
@@ -124,12 +123,12 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
break;
}
- pre_margin = OSCR_FREQ * time;
+ pre_margin = oscr_freq * time;
OSMR3 = OSCR + pre_margin;
/*fall through*/
case WDIOC_GETTIMEOUT:
- ret = put_user(pre_margin / OSCR_FREQ, p);
+ ret = put_user(pre_margin / oscr_freq, p);
break;
}
return ret;
@@ -156,6 +155,8 @@ static int __init sa1100dog_init(void)
{
int ret;
+ oscr_freq = get_clock_tick_rate();
+
/*
* Read the reset status, and save it for later. If
* we suspend, RCSR will be cleared, and the watchdog
@@ -163,7 +164,7 @@ static int __init sa1100dog_init(void)
*/
boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
WDIOF_CARDRESET : 0;
- pre_margin = OSCR_FREQ * margin;
+ pre_margin = oscr_freq * margin;
ret = misc_register(&sa1100dog_miscdev);
if (ret == 0)
OpenPOWER on IntegriCloud