CRIS v10: Add synchronous serial port driver for CRIS v10.

3 files changed, 1473 insertions, 0 deletions

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 4a27ef3..e6d440a 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -292,6 +292,37 @@ config ETRAX_PCF8563
 
 endchoice
 
+config ETRAX_SYNCHRONOUS_SERIAL
+	bool "Synchronous serial-port support"
+	help
+	  Select this to enable the synchronous serial port driver.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
+	bool "Synchronous serial port 0 enabled"
+	depends on ETRAX_SYNCHRONOUS_SERIAL
+	help
+	  Enabled synchronous serial port 0.
+
+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
+	bool "Enable DMA on synchronous serial port 0."
+	depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
+	help
+	  A synchronous serial port can run in manual or DMA mode.
+	  Selecting this option will make it run in DMA mode.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
+	bool "Synchronous serial port 1 enabled"
+	depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
+	help
+	  Enabled synchronous serial port 1.
+
+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
+	bool "Enable DMA on synchronous serial port 1."
+	depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
+	help
+	  A synchronous serial port can run in manual or DMA mode.
+	  Selecting this option will make it run in DMA mode.
+
 choice
 	prompt "Network LED behavior"
 	depends on ETRAX_ETHERNET
diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile
index 074e10f..44bf2e8 100644
--- a/arch/cris/arch-v10/drivers/Makefile
+++ b/arch/cris/arch-v10/drivers/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
 obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
 obj-$(CONFIG_ETRAX_DS1302)		+= ds1302.o
 obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
new file mode 100644
index 0000000..069546e
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -0,0 +1,1441 @@
+/*
+ * Simple synchronous serial port driver for ETRAX 100LX.
+ *
+ * Synchronous serial ports are used for continuous streamed data like audio.
+ * The default setting for this driver is compatible with the STA 013 MP3
+ * decoder. The driver can easily be tuned to fit other audio encoder/decoders
+ * and SPI
+ *
+ * Copyright (c) 2001-2008 Axis Communications AB
+ *
+ * Author: Mikael Starvik, Johan Adolfsson
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/arch/svinto.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/sync_serial.h>
+#include <asm/arch/io_interface_mux.h>
+
+/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/*                                                                       */
+/* Three DMA descriptors are linked together. Each DMA descriptor is     */
+/* responsible for port->bufchunk of a common buffer.                    */
+/*                                                                       */
+/* +---------------------------------------------+                       */
+/* |   +----------+   +----------+   +----------+ |                      */
+/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+                      */
+/*     +----------+   +----------+   +----------+                        */
+/*         |            |              |                                 */
+/*         v            v              v                                 */
+/*   +-------------------------------------+                             */
+/*   |        BUFFER                       |                             */
+/*   +-------------------------------------+                             */
+/*      |<- data_avail ->|                                               */
+/*    readp          writep                                              */
+/*                                                                       */
+/* If the application keeps up the pace readp will be right after writep.*/
+/* If the application can't keep the pace we have to throw away data.    */
+/* The idea is that readp should be ready with the data pointed out by	 */
+/* Descr[i] when the DMA has filled in Descr[i+1].                       */
+/* Otherwise we will discard	                                         */
+/* the rest of the data pointed out by Descr1 and set readp to the start */
+/* of Descr2                                                             */
+
+#define SYNC_SERIAL_MAJOR 125
+
+/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
+/* words can be handled */
+#define IN_BUFFER_SIZE 12288
+#define IN_DESCR_SIZE 256
+#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
+#define OUT_BUFFER_SIZE 4096
+
+#define DEFAULT_FRAME_RATE 0
+#define DEFAULT_WORD_RATE 7
+
+/* NOTE: Enabling some debug will likely cause overrun or underrun,
+ * especially if manual mode is use.
+ */
+#define DEBUG(x)
+#define DEBUGREAD(x)
+#define DEBUGWRITE(x)
+#define DEBUGPOLL(x)
+#define DEBUGRXINT(x)
+#define DEBUGTXINT(x)
+
+/* Define some macros to access ETRAX 100 registers */
+#define SETF(var, reg, field, val) \
+	do { \
+		var = (var & ~IO_MASK_(reg##_, field##_)) | \
+			IO_FIELD_(reg##_, field##_, val); \
+	} while (0)
+
+#define SETS(var, reg, field, val) \
+	do { \
+		var = (var & ~IO_MASK_(reg##_, field##_)) | \
+			IO_STATE_(reg##_, field##_, _##val); \
+	} while (0)
+
+struct sync_port {
+	/* Etrax registers and bits*/
+	const volatile unsigned *const status;
+	volatile unsigned *const ctrl_data;
+	volatile unsigned *const output_dma_first;
+	volatile unsigned char *const output_dma_cmd;
+	volatile unsigned char *const output_dma_clr_irq;
+	volatile unsigned *const input_dma_first;
+	volatile unsigned char *const input_dma_cmd;
+	volatile unsigned *const input_dma_descr;
+	/* 8*4 */
+	volatile unsigned char *const input_dma_clr_irq;
+	volatile unsigned *const data_out;
+	const volatile unsigned *const data_in;
+	char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
+	char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
+	char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */
+
+	char output_dma_bit; /* In R_IRQ_MASK2_RD */
+	/* End of fields initialised in array */
+	char started; /* 1 if port has been started */
+	char port_nbr; /* Port 0 or 1 */
+	char busy; /* 1 if port is busy */
+
+	char enabled;  /* 1 if port is enabled */
+	char use_dma;  /* 1 if port uses dma */
+	char tr_running;
+
+	char init_irqs;
+
+	/* Register shadow */
+	unsigned int ctrl_data_shadow;
+	/* Remaining bytes for current transfer */
+	volatile unsigned int out_count;
+	/* Current position in out_buffer */
+	unsigned char *outp;
+	/* 16*4 */
+	/* Next byte to be read by application */
+	volatile unsigned char *volatile readp;
+	/* Next byte to be written by etrax */
+	volatile unsigned char *volatile writep;
+
+	unsigned int in_buffer_size;
+	unsigned int inbufchunk;
+	struct etrax_dma_descr out_descr __attribute__ ((aligned(32)));
+	struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32)));
+	unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
+	unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	struct etrax_dma_descr *next_rx_desc;
+	struct etrax_dma_descr *prev_rx_desc;
+	int full;
+
+	wait_queue_head_t out_wait_q;
+	wait_queue_head_t in_wait_q;
+};
+
+
+static int etrax_sync_serial_init(void);
+static void initialize_port(int portnbr);
+static inline int sync_data_avail(struct sync_port *port);
+
+static int sync_serial_open(struct inode *inode, struct file *file);
+static int sync_serial_release(struct inode *inode, struct file *file);
+static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
+
+static int sync_serial_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg);
+static ssize_t sync_serial_write(struct file *file, const char *buf,
+	size_t count, loff_t *ppos);
+static ssize_t sync_serial_read(struct file *file, char *buf,
+	size_t count, loff_t *ppos);
+
+#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
+#define SYNC_SER_DMA
+#endif
+
+static void send_word(struct sync_port *port);
+static void start_dma(struct sync_port *port, const char *data, int count);
+static void start_dma_in(struct sync_port *port);
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id);
+static irqreturn_t rx_interrupt(int irq, void *dev_id);
+#endif
+#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
+#define SYNC_SER_MANUAL
+#endif
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id);
+#endif
+
+/* The ports */
+static struct sync_port ports[] = {
+	{
+		.status                = R_SYNC_SERIAL1_STATUS,
+		.ctrl_data             = R_SYNC_SERIAL1_CTRL,
+		.output_dma_first      = R_DMA_CH8_FIRST,
+		.output_dma_cmd        = R_DMA_CH8_CMD,
+		.output_dma_clr_irq    = R_DMA_CH8_CLR_INTR,
+		.input_dma_first       = R_DMA_CH9_FIRST,
+		.input_dma_cmd         = R_DMA_CH9_CMD,
+		.input_dma_descr       = R_DMA_CH9_DESCR,
+		.input_dma_clr_irq     = R_DMA_CH9_CLR_INTR,
+		.data_out              = R_SYNC_SERIAL1_TR_DATA,
+		.data_in               = R_SYNC_SERIAL1_REC_DATA,
+		.data_avail_bit        = IO_BITNR(R_IRQ_MASK1_RD, ser1_data),
+		.transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready),
+		.input_dma_descr_bit   = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr),
+		.output_dma_bit        = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop),
+		.init_irqs             = 1,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
+		.use_dma               = 1,
+#else
+		.use_dma               = 0,
+#endif
+	},
+	{
+		.status                = R_SYNC_SERIAL3_STATUS,
+		.ctrl_data             = R_SYNC_SERIAL3_CTRL,
+		.output_dma_first      = R_DMA_CH4_FIRST,
+		.output_dma_cmd        = R_DMA_CH4_CMD,
+		.output_dma_clr_irq    = R_DMA_CH4_CLR_INTR,
+		.input_dma_first       = R_DMA_CH5_FIRST,
+		.input_dma_cmd         = R_DMA_CH5_CMD,
+		.input_dma_descr       = R_DMA_CH5_DESCR,
+		.input_dma_clr_irq     = R_DMA_CH5_CLR_INTR,
+		.data_out              = R_SYNC_SERIAL3_TR_DATA,
+		.data_in               = R_SYNC_SERIAL3_REC_DATA,
+		.data_avail_bit        = IO_BITNR(R_IRQ_MASK1_RD, ser3_data),
+		.transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready),
+		.input_dma_descr_bit   = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr),
+		.output_dma_bit        = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop),
+		.init_irqs             = 1,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
+		.use_dma               = 1,
+#else
+		.use_dma               = 0,
+#endif
+	}
+};
+
+/* Register shadows */
+static unsigned sync_serial_prescale_shadow;
+
+#define NUMBER_OF_PORTS 2
+
+static struct file_operations sync_serial_fops = {
+	.owner   = THIS_MODULE,
+	.write   = sync_serial_write,
+	.read    = sync_serial_read,
+	.poll    = sync_serial_poll,
+	.ioctl   = sync_serial_ioctl,
+	.open    = sync_serial_open,
+	.release = sync_serial_release
+};
+
+static int __init etrax_sync_serial_init(void)
+{
+	ports[0].enabled = 0;
+	ports[1].enabled = 0;
+
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+	if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) {
+		printk(KERN_CRIT "ETRAX100LX sync_serial: "
+			"Could not allocate IO group for port %d\n", 0);
+		return -EBUSY;
+	}
+#endif
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+	if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) {
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+		cris_free_io_interface(if_sync_serial_1);
+#endif
+		printk(KERN_CRIT "ETRAX100LX sync_serial: "
+			"Could not allocate IO group for port %d\n", 1);
+		return -EBUSY;
+	}
+#endif
+
+	if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial",
+			&sync_serial_fops) < 0) {
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+		cris_free_io_interface(if_sync_serial_3);
+#endif
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+		cris_free_io_interface(if_sync_serial_1);
+#endif
+		printk("unable to get major for synchronous serial port\n");
+		return -EBUSY;
+	}
+
+	/* Deselect synchronous serial ports while configuring. */
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+
+	/* Initialize Ports */
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+	ports[0].enabled = 1;
+	SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
+	ports[0].use_dma = 1;
+#else
+	ports[0].use_dma = 0;
+#endif
+	initialize_port(0);
+#endif
+
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+	ports[1].enabled = 1;
+	SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
+	ports[1].use_dma = 1;
+#else
+	ports[1].use_dma = 0;
+#endif
+	initialize_port(1);
+#endif
+
+	*R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */
+
+	/* Set up timing */
+	*R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = (
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) |
+		IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate,
+			DEFAULT_FRAME_RATE) |
+		IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal));
+
+	/* Select synchronous ports */
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+
+	printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n");
+	return 0;
+}
+
+static void __init initialize_port(int portnbr)
+{
+	struct sync_port *port = &ports[portnbr];
+
+	DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr));
+
+	port->started = 0;
+	port->port_nbr = portnbr;
+	port->busy = 0;
+	port->tr_running = 0;
+
+	port->out_count = 0;
+	port->outp = port->out_buffer;
+
+	port->readp = port->flip;
+	port->writep = port->flip;
+	port->in_buffer_size = IN_BUFFER_SIZE;
+	port->inbufchunk = IN_DESCR_SIZE;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
+	port->prev_rx_desc->ctrl = d_eol;
+
+	init_waitqueue_head(&port->out_wait_q);
+	init_waitqueue_head(&port->in_wait_q);
+
+	port->ctrl_data_shadow =
+		IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore)       |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on)	     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb)	     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8)     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high);
+
+	if (port->use_dma)
+		port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
+			dma_enable, on);
+	else
+		port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
+			dma_enable, off);
+
+	*port->ctrl_data = port->ctrl_data_shadow;
+}
+
+static inline int sync_data_avail(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----      -    -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->in_buffer_size - (start - end);
+	return avail;
+}
+
+static inline int sync_data_avail_to_end(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----           -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+
+	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+	return avail;
+}
+
+
+static int sync_serial_open(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	struct sync_port *port;
+	int mode;
+
+	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+	/* Allow open this device twice (assuming one reader and one writer) */
+	if (port->busy == 2) {
+		DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
+		return -EBUSY;
+	}
+	if (port->init_irqs) {
+		if (port->use_dma) {
+			if (port == &ports[0]) {
+#ifdef SYNC_SER_DMA
+				if (request_irq(24, tr_interrupt, 0,
+						"synchronous serial 1 dma tr",
+						&ports[0])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 IRQ");
+					return -EBUSY;
+				} else if (request_irq(25, rx_interrupt, 0,
+						"synchronous serial 1 dma rx",
+						&ports[0])) {
+					free_irq(24, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 IRQ");
+					return -EBUSY;
+				} else if (cris_request_dma(8,
+						"synchronous serial 1 dma tr",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser1)) {
+					free_irq(24, &port[0]);
+					free_irq(25, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 "
+						"TX DMA channel");
+					return -EBUSY;
+				} else if (cris_request_dma(9,
+						"synchronous serial 1 dma rec",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser1)) {
+					cris_free_dma(8, NULL);
+					free_irq(24, &port[0]);
+					free_irq(25, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 "
+						"RX DMA channel");
+					return -EBUSY;
+				}
+#endif
+				RESET_DMA(8); WAIT_DMA(8);
+				RESET_DMA(9); WAIT_DMA(9);
+				*R_DMA_CH8_CLR_INTR =
+					IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr,
+						do);
+				*R_DMA_CH9_CLR_INTR =
+					IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr,
+						do);
+				*R_IRQ_MASK2_SET =
+					IO_STATE(R_IRQ_MASK2_SET, dma8_eop,
+						set) |
+					IO_STATE(R_IRQ_MASK2_SET, dma9_descr,
+						set);
+			} else if (port == &ports[1]) {
+#ifdef SYNC_SER_DMA
+				if (request_irq(20, tr_interrupt, 0,
+						"synchronous serial 3 dma tr",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 IRQ");
+					return -EBUSY;
+				} else if (request_irq(21, rx_interrupt, 0,
+						"synchronous serial 3 dma rx",
+						&ports[1])) {
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 IRQ");
+					return -EBUSY;
+				} else if (cris_request_dma(4,
+						"synchronous serial 3 dma tr",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser3)) {
+					free_irq(21, &ports[1]);
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 "
+						"TX DMA channel");
+					return -EBUSY;
+				} else if (cris_request_dma(5,
+						"synchronous serial 3 dma rec",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser3)) {
+					cris_free_dma(4, NULL);
+					free_irq(21, &ports[1]);
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 "
+						"RX DMA channel");
+					return -EBUSY;
+				}
+#endif
+				RESET_DMA(4); WAIT_DMA(4);
+				RESET_DMA(5); WAIT_DMA(5);
+				*R_DMA_CH4_CLR_INTR =
+					IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr,
+						do);
+				*R_DMA_CH5_CLR_INTR =
+					IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr,
+						do);
+				*R_IRQ_MASK2_SET =
+					IO_STATE(R_IRQ_MASK2_SET, dma4_eop,
+						set) |
+					IO_STATE(R_IRQ_MASK2_SET, dma5_descr,
+						set);
+			}
+			start_dma_in(port);
+			port->init_irqs = 0;
+		} else { /* !port->use_dma */
+#ifdef SYNC_SER_MANUAL
+			if (port == &ports[0]) {
+				if (request_irq(8,
+						manual_interrupt,
+						IRQF_SHARED | IRQF_DISABLED,
+						"synchronous serial manual irq",
+						&ports[0])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial manual irq");
+					return -EBUSY;
+				}
+			} else if (port == &ports[1]) {
+				if (request_irq(8,
+						manual_interrupt,
+						IRQF_SHARED | IRQF_DISABLED,
+						"synchronous serial manual irq",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial manual irq");
+					return -EBUSY;
+				}
+			}
+			port->init_irqs = 0;
+#else
+			panic("sync_serial: Manual mode not supported.\n");
+#endif /* SYNC_SER_MANUAL */
+		}
+	} /* port->init_irqs */
+
+	port->busy++;
+	/* Start port if we use it as input */
+	mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow);
+	if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+		*port->ctrl_data = port->ctrl_data_shadow;
+		if (!port->use_dma)
+			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
+		DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
+	}
+	return 0;
+}
+
+static int sync_serial_release(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	struct sync_port *port;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+	if (port->busy)
+		port->busy--;
+	if (!port->busy)
+		*R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) |
+				    (1 << port->transmitter_ready_bit));
+
+	return 0;
+}
+
+
+
+static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	unsigned int mask = 0;
+	struct sync_port *port;
+	DEBUGPOLL(static unsigned int prev_mask = 0);
+
+	port = &ports[dev];
+	poll_wait(file, &port->out_wait_q, wait);
+	poll_wait(file, &port->in_wait_q, wait);
+	/* Some room to write */
+	if (port->out_count < OUT_BUFFER_SIZE)
+		mask |=  POLLOUT | POLLWRNORM;
+	/* At least an inbufchunk of data */
+	if (sync_data_avail(port) >= port->inbufchunk)
+		mask |= POLLIN | POLLRDNORM;
+
+	DEBUGPOLL(if (mask != prev_mask)
+		printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n",
+			mask,
+			mask & POLLOUT ? "POLLOUT" : "",
+			mask & POLLIN ? "POLLIN" : "");
+		prev_mask = mask;
+	);
+	return mask;
+}
+
+static int sync_serial_ioctl(struct inode *inode, struct file *file,
+		  unsigned int cmd, unsigned long arg)
+{
+	int return_val = 0;
+	unsigned long flags;
+
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	struct sync_port *port;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -1;
+	}
+	port = &ports[dev];
+
+	local_irq_save(flags);
+	/* Disable port while changing config */
+	if (dev) {
+		if (port->use_dma) {
+			RESET_DMA(4); WAIT_DMA(4);
+			port->tr_running = 0;
+			port->out_count = 0;
+			port->outp = port->out_buffer;
+			*R_DMA_CH4_CLR_INTR =
+				IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) |
+				IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do);
+		}
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
+	} else {
+		if (port->use_dma) {
+			RESET_DMA(8); WAIT_DMA(8);
+			port->tr_running = 0;
+			port->out_count = 0;
+			port->outp = port->out_buffer;
+			*R_DMA_CH8_CLR_INTR =
+				IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) |
+				IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do);
+		}
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
+	}
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+	local_irq_restore(flags);
+
+	switch (cmd) {
+	case SSP_SPEED:
+		if (GET_SPEED(arg) == CODEC) {
+			if (dev)
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
+					codec);
+			else
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
+					codec);
+
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, prescaler,
+				GET_FREQ(arg));
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, frame_rate,
+				GET_FRAME_RATE(arg));
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, word_rate,
+				GET_WORD_RATE(arg));
+		} else {
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				tr_baud, GET_SPEED(arg));
+			if (dev)
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
+					baudrate);
+			else
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
+					baudrate);
+		}
+		break;
+	case SSP_MODE:
+		if (arg > 5)
+			return -EINVAL;
+		if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)
+			*R_IRQ_MASK1_CLR = 1 << port->data_avail_bit;
+		else if (!port->use_dma)
+			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
+		SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg);
+		break;
+	case SSP_FRAME_SYNC:
+		if (arg & NORMAL_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_synctype, normal);
+		else if (arg & EARLY_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_synctype, early);
+
+		if (arg & BIT_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, bit);
+		else if (arg & WORD_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, word);
+		else if (arg & EXTENDED_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, extended);
+
+		if (arg & SYNC_ON)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_sync, on);
+		else if (arg & SYNC_OFF)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_sync, off);
+
+		if (arg & WORD_SIZE_8)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size8bit);
+		else if (arg & WORD_SIZE_12)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size12bit);
+		else if (arg & WORD_SIZE_16)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size16bit);
+		else if (arg & WORD_SIZE_24)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size24bit);
+		else if (arg & WORD_SIZE_32)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size32bit);
+
+		if (arg & BIT_ORDER_MSB)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				bitorder, msb);
+		else if (arg & BIT_ORDER_LSB)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				bitorder, lsb);
+
+		if (arg & FLOW_CONTROL_ENABLE)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				flow_ctrl, enabled);
+		else if (arg & FLOW_CONTROL_DISABLE)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				flow_ctrl, disabled);
+
+		if (arg & CLOCK_NOT_GATED)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_mode, normal);
+		else if (arg & CLOCK_GATED)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_mode, gated);
+
+		break;
+	case SSP_IPOLARITY:
+		/* NOTE!! negedge is considered NORMAL */
+		if (arg & CLOCK_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, neg);
+		else if (arg & CLOCK_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, pos);
+
+		if (arg & FRAME_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, normal);
+		else if (arg & FRAME_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, inverted);
+
+		if (arg & STATUS_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_polarity, normal);
+		else if (arg & STATUS_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_polarity, inverted);
+		break;
+	case SSP_OPOLARITY:
+		if (arg & CLOCK_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, normal);
+		else if (arg & CLOCK_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, inverted);
+
+		if (arg & FRAME_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, normal);
+		else if (arg & FRAME_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, inverted);
+
+		if (arg & STATUS_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_driver, normal);
+		else if (arg & STATUS_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_driver, inverted);
+		break;
+	case SSP_SPI:
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl,
+			disabled);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder,
+			msb);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize,
+			size8bit);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize,
+			word);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype,
+			normal);
+		if (arg & SPI_SLAVE) {
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, inverted);
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, neg);
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				mode, SLAVE_INPUT);
+		} else {
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, inverted);
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, inverted);
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				mode, MASTER_OUTPUT);
+		}
+		break;
+	case SSP_INBUFCHUNK:
+#if 0
+		if (arg > port->in_buffer_size/NUM_IN_DESCR)
+			return -EINVAL;
+		port->inbufchunk = arg;
+		/* Make sure in_buffer_size is a multiple of inbufchunk */
+		port->in_buffer_size =
+			(port->in_buffer_size/port->inbufchunk) *
+			port->inbufchunk;
+		DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n",
+			port->inbufchunk, port->in_buffer_size));
+		if (port->use_dma) {
+			if (port->port_nbr == 0) {
+				RESET_DMA(9);
+				WAIT_DMA(9);
+			} else {
+				RESET_DMA(5);
+				WAIT_DMA(5);
+			}
+			start_dma_in(port);
+		}
+#endif
+		break;
+	default:
+		return_val = -1;
+	}
+	/* Make sure we write the config without interruption */
+	local_irq_save(flags);
+	/* Set config and enable port */
+	*port->ctrl_data = port->ctrl_data_shadow;
+	nop(); nop(); nop(); nop();
+	*R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow;
+	nop(); nop(); nop(); nop();
+	if (dev)
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
+	else
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
+
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+	/* Reset DMA. At readout from serial port the data could be shifted
+	 * one byte if not resetting DMA.
+	 */
+	if (port->use_dma) {
+		if (port->port_nbr == 0) {
+			RESET_DMA(9);
+			WAIT_DMA(9);
+		} else {
+			RESET_DMA(5);
+			WAIT_DMA(5);
+		}
+		start_dma_in(port);
+	}
+	local_irq_restore(flags);
+	return return_val;
+}
+
+
+static ssize_t sync_serial_write(struct file *file, const char *buf,
+	size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	DECLARE_WAITQUEUE(wait, current);
+	struct sync_port *port;
+	unsigned long flags;
+	unsigned long c, c1;
+	unsigned long free_outp;
+	unsigned long outp;
+	unsigned long out_buffer;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n",
+		port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
+	/* Space to end of buffer */
+	/*
+	 * out_buffer <c1>012345<-   c    ->OUT_BUFFER_SIZE
+	 *            outp^    +out_count
+	 *                      ^free_outp
+	 * out_buffer 45<-     c      ->0123OUT_BUFFER_SIZE
+	 *             +out_count   outp^
+	 *              free_outp
+	 *
+	 */
+
+	/* Read variables that may be updated by interrupts */
+	local_irq_save(flags);
+	if (count > OUT_BUFFER_SIZE - port->out_count)
+		count = OUT_BUFFER_SIZE - port->out_count;
+
+	outp = (unsigned long)port->outp;
+	free_outp = outp + port->out_count;
+	local_irq_restore(flags);
+	out_buffer = (unsigned long)port->out_buffer;
+
+	/* Find out where and how much to write */
+	if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
+		free_outp -= OUT_BUFFER_SIZE;
+	if (free_outp >= outp)
+		c = out_buffer + OUT_BUFFER_SIZE - free_outp;
+	else
+		c = outp - free_outp;
+	if (c > count)
+		c = count;
+
+	DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n",
+		outp, free_outp, c));
+	if (copy_from_user((void *)free_outp, buf, c))
+		return -EFAULT;
+
+	if (c != count) {
+		buf += c;
+		c1 = count - c;
+		DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n",
+			free_outp-out_buffer, c, c1));
+		if (copy_from_user((void *)out_buffer, buf, c1))
+			return -EFAULT;
+	}
+	local_irq_save(flags);
+	port->out_count += count;
+	local_irq_restore(flags);
+
+	/* Make sure transmitter/receiver is running */
+	if (!port->started) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+	}
+
+	*port->ctrl_data = port->ctrl_data_shadow;
+
+	if (file->f_flags & O_NONBLOCK)	{
+		local_irq_save(flags);
+		if (!port->tr_running) {
+			if (!port->use_dma) {
+				/* Start sender by writing data */
+				send_word(port);
+				/* and enable transmitter ready IRQ */
+				*R_IRQ_MASK1_SET = 1 <<
+					port->transmitter_ready_bit;
+			} else
+				start_dma(port,
+					(unsigned char *volatile)port->outp, c);
+		}
+		local_irq_restore(flags);
+		DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n",
+			port->port_nbr, count));
+		return count;
+	}
+
+	/* Sleep until all sent */
+	add_wait_queue(&port->out_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	local_irq_save(flags);
+	if (!port->tr_running) {
+		if (!port->use_dma) {
+			/* Start sender by writing data */
+			send_word(port);
+			/* and enable transmitter ready IRQ */
+			*R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit;
+		} else
+			start_dma(port, port->outp, c);
+	}
+	local_irq_restore(flags);
+	schedule();
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->out_wait_q, &wait);
+	if (signal_pending(current))
+		return -EINTR;
+
+	DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count));
+	return count;
+}
+
+static ssize_t sync_serial_read(struct file *file, char *buf,
+				size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int avail;
+	struct sync_port *port;
+	unsigned char *start;
+	unsigned char *end;
+	unsigned long flags;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n",
+		dev, count, port->readp - port->flip,
+		port->writep - port->flip, port->in_buffer_size));
+
+	if (!port->started) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+	}
+	*port->ctrl_data = port->ctrl_data_shadow;
+
+	/* Calculate number of available bytes */
+	/* Save pointers to avoid that they are modified by interrupt */
+	local_irq_save(flags);
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	local_irq_restore(flags);
+	while (start == end && !port->full) {
+		/* No data */
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		interruptible_sleep_on(&port->in_wait_q);
+		if (signal_pending(current))
+			return -EINTR;
+
+		local_irq_save(flags);
+		start = (unsigned char *)port->readp; /* cast away volatile */
+		end = (unsigned char *)port->writep;  /* cast away volatile */
+		local_irq_restore(flags);
+	}
+
+	/* Lazy read, never return wrapped data. */
+	if (port->full)
+		avail = port->in_buffer_size;
+	else if (end > start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+
+	count = count > avail ? avail : count;
+	if (copy_to_user(buf, start, count))
+		return -EFAULT;
+	/* Disable interrupts while updating readp */
+	local_irq_save(flags);
+	port->readp += count;
+	if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
+		port->readp = port->flip;
+	port->full = 0;
+	local_irq_restore(flags);
+	DEBUGREAD(printk(KERN_DEBUG "r %d\n", count));
+	return count;
+}
+
+static void send_word(struct sync_port *port)
+{
+	switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize,
+			port->ctrl_data_shadow)) {
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
+		 port->out_count--;
+		 *port->data_out = *port->outp++;
+		 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			 port->outp = port->out_buffer;
+		 break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
+	{
+		int data = (*port->outp++) << 8;
+		data |= *port->outp++;
+		port->out_count -= 2;
+		*port->data_out = data;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	}
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
+		port->out_count -= 2;
+		*port->data_out = *(unsigned short *)port->outp;
+		port->outp += 2;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
+		port->out_count -= 3;
+		*port->data_out = *(unsigned int *)port->outp;
+		port->outp += 3;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
+		port->out_count -= 4;
+		*port->data_out = *(unsigned int *)port->outp;
+		port->outp += 4;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	}
+}
+
+
+static void start_dma(struct sync_port *port, const char *data, int count)
+{
+	port->tr_running = 1;
+	port->out_descr.hw_len = 0;
+	port->out_descr.next = 0;
+	port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */
+	port->out_descr.sw_len = count;
+	port->out_descr.buf = virt_to_phys(data);
+	port->out_descr.status = 0;
+
+	*port->output_dma_first = virt_to_phys(&port->out_descr);
+	*port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
+	DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n",
+		(unsigned long)data, count));
+}
+
+static void start_dma_in(struct sync_port *port)
+{
+	int i;
+	unsigned long buf;
+	port->writep = port->flip;
+
+	if (port->writep > port->flip + port->in_buffer_size) {
+		panic("Offset too large in sync serial driver\n");
+		return;
+	}
+	buf = virt_to_phys(port->in_buffer);
+	for (i = 0; i < NUM_IN_DESCR; i++) {
+		port->in_descr[i].sw_len = port->inbufchunk;
+		port->in_descr[i].ctrl = d_int;
+		port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]);
+		port->in_descr[i].buf = buf;
+		port->in_descr[i].hw_len = 0;
+		port->in_descr[i].status = 0;
+		port->in_descr[i].fifo_len = 0;
+		buf += port->inbufchunk;
+		prepare_rx_descriptor(&port->in_descr[i]);
+	}
+	/* Link the last descriptor to the first */
+	port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]);
+	port->in_descr[i-1].ctrl |= d_eol;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
+	*port->input_dma_first = virt_to_phys(port->next_rx_desc);
+	*port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
+}
+
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id)
+{
+	unsigned long ireg = *R_IRQ_MASK2_RD;
+	struct etrax_dma_descr *descr;
+	unsigned int sentl;
+	int handled = 0;
+	int i;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+		if (!port->enabled  || !port->use_dma)
+			continue;
+
+		/* IRQ active for the port? */
+		if (!(ireg & (1 << port->output_dma_bit)))
+			continue;
+
+		handled = 1;
+
+		/* Clear IRQ */
+		*port->output_dma_clr_irq =
+			IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) |
+			IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do);
+
+		descr = &port->out_descr;
+		if (!(descr->status & d_stop))
+			sentl = descr->sw_len;
+		else
+			/* Otherwise find amount of data sent here */
+			sentl = descr->hw_len;
+
+		port->out_count -= sentl;
+		port->outp += sentl;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		if (port->out_count) {
+			int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
+			if (c > port->out_count)
+				c = port->out_count;
+			DEBUGTXINT(printk(KERN_DEBUG
+				"tx_int DMAWRITE %i %i\n", sentl, c));
+			start_dma(port, port->outp, c);
+		} else  {
+			DEBUGTXINT(printk(KERN_DEBUG
+				"tx_int DMA stop %i\n", sentl));
+			port->tr_running = 0;
+		}
+		/* wake up the waiting process */
+		wake_up_interruptible(&port->out_wait_q);
+	}
+	return IRQ_RETVAL(handled);
+} /* tr_interrupt */
+
+static irqreturn_t rx_interrupt(int irq, void *dev_id)
+{
+	unsigned long ireg = *R_IRQ_MASK2_RD;
+	int i;
+	int handled = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+
+		if (!port->enabled || !port->use_dma)
+			continue;
+
+		if (!(ireg & (1 << port->input_dma_descr_bit)))
+			continue;
+
+		/* Descriptor interrupt */
+		handled = 1;
+		while (*port->input_dma_descr !=
+				virt_to_phys(port->next_rx_desc)) {
+			if (port->writep + port->inbufchunk > port->flip +
+					port->in_buffer_size) {
+				int first_size = port->flip +
+					port->in_buffer_size - port->writep;
+				memcpy(port->writep,
+					phys_to_virt(port->next_rx_desc->buf),
+					first_size);
+				memcpy(port->flip,
+					phys_to_virt(port->next_rx_desc->buf +
+					first_size),
+					port->inbufchunk - first_size);
+				port->writep = port->flip +
+					port->inbufchunk - first_size;
+			} else {
+				memcpy(port->writep,
+					phys_to_virt(port->next_rx_desc->buf),
+					port->inbufchunk);
+				port->writep += port->inbufchunk;
+				if (port->writep >= port->flip
+						+ port->in_buffer_size)
+					port->writep = port->flip;
+			}
+			if (port->writep == port->readp)
+				port->full = 1;
+			prepare_rx_descriptor(port->next_rx_desc);
+			port->next_rx_desc->ctrl |= d_eol;
+			port->prev_rx_desc->ctrl &= ~d_eol;
+			port->prev_rx_desc = phys_to_virt((unsigned)
+				port->next_rx_desc);
+			port->next_rx_desc = phys_to_virt((unsigned)
+				port->next_rx_desc->next);
+			/* Wake up the waiting process */
+			wake_up_interruptible(&port->in_wait_q);
+			*port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD,
+				cmd, restart);
+			/* DMA has reached end of descriptor */
+			*port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR,
+				clr_descr, do);
+		}
+	}
+	return IRQ_RETVAL(handled);
+} /* rx_interrupt */
+#endif /* SYNC_SER_DMA */
+
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id)
+{
+	int i;
+	int handled = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+
+		if (!port->enabled || port->use_dma)
+			continue;
+
+		/* Data received? */
+		if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) {
+			handled = 1;
+			/* Read data */
+			switch (port->ctrl_data_shadow &
+				IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) {
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
+				*port->writep++ =
+					*(volatile char *)port->data_in;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
+			{
+				int data = *(unsigned short *)port->data_in;
+				*port->writep = (data & 0x0ff0) >> 4;
+				*(port->writep + 1) = data & 0x0f;
+				port->writep += 2;
+				break;
+			}
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
+				*(unsigned short *)port->writep =
+					*(volatile unsigned short *)port->data_in;
+				port->writep += 2;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
+				*(unsigned int *)port->writep = *port->data_in;
+				port->writep += 3;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
+				*(unsigned int *)port->writep = *port->data_in;
+				port->writep += 4;
+				break;
+			}
+
+			/* Wrap? */
+			if (port->writep >= port->flip + port->in_buffer_size)
+				port->writep = port->flip;
+			if (port->writep == port->readp) {
+				/* Receive buffer overrun, discard oldest */
+				port->readp++;
+				/* Wrap? */
+				if (port->readp >= port->flip +
+						port->in_buffer_size)
+					port->readp = port->flip;
+			}
+			if (sync_data_avail(port) >= port->inbufchunk) {
+				/* Wake up application */
+				wake_up_interruptible(&port->in_wait_q);
+			}
+		}
+
+		/* Transmitter ready? */
+		if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) {
+			if (port->out_count > 0) {
+				/* More data to send */
+				send_word(port);
+			} else {
+				/* Transmission finished */
+				/* Turn off IRQ */
+				*R_IRQ_MASK1_CLR = 1 <<
+					port->transmitter_ready_bit;
+				/* Wake up application */
+				wake_up_interruptible(&port->out_wait_q);
+			}
+		}
+	}
+	return IRQ_RETVAL(handled);
+}
+#endif
+
+module_init(etrax_sync_serial_init);