summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJames Smart <James.Smart@Emulex.Com>2009-05-22 14:51:39 -0400
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2009-06-08 11:21:29 -0500
commitda0436e915a5c17ee79e72c1bf978a4ebb1cbf4d (patch)
tree7784646b7627117fa7849a901c85294fae905505
parent3772a99175f5378b5001e8da364341a8b8226a4a (diff)
downloadop-kernel-dev-da0436e915a5c17ee79e72c1bf978a4ebb1cbf4d.zip
op-kernel-dev-da0436e915a5c17ee79e72c1bf978a4ebb1cbf4d.tar.gz
[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base Support
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat
-rw-r--r--drivers/scsi/lpfc/lpfc.h49
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c83
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h59
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c34
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h140
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h2141
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c3800
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c204
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c492
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c1263
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h27
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h467
-rw-r--r--drivers/scsi/lpfc/lpfc_vport.c23
19 files changed, 8485 insertions, 311 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 6c24c9a..13ac108 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -105,9 +105,11 @@ struct lpfc_dma_pool {
};
struct hbq_dmabuf {
+ struct lpfc_dmabuf hbuf;
struct lpfc_dmabuf dbuf;
uint32_t size;
uint32_t tag;
+ struct lpfc_rcqe rcqe;
};
/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
@@ -141,7 +143,10 @@ typedef struct lpfc_vpd {
} rev;
struct {
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t rsvd3 :19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
@@ -159,7 +164,10 @@ typedef struct lpfc_vpd {
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 :19; /* Reserved */
#endif
} sli3Feat;
} lpfc_vpd_t;
@@ -280,6 +288,9 @@ struct lpfc_vport {
enum discovery_state port_state;
uint16_t vpi;
+ uint16_t vfi;
+ uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED 0x1
uint32_t fc_flag; /* FC flags */
/* Several of these flags are HBA centric and should be moved to
@@ -392,6 +403,9 @@ struct lpfc_vport {
#endif
uint8_t stat_data_enabled;
uint8_t stat_data_blocked;
+ struct list_head rcv_buffer_list;
+ uint32_t vport_flag;
+#define STATIC_VPORT 1
};
struct hbq_s {
@@ -494,6 +508,7 @@ struct lpfc_hba {
#define LPFC_SLI3_CRP_ENABLED 0x08
#define LPFC_SLI3_INB_ENABLED 0x10
#define LPFC_SLI3_BG_ENABLED 0x20
+#define LPFC_SLI3_DSS_ENABLED 0x40
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
@@ -507,8 +522,13 @@ struct lpfc_hba {
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT 0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER 0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT 0x20
+#define ELS_XRI_ABORT_EVENT 0x40
+#define ASYNC_EVENT 0x80
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
@@ -567,6 +587,9 @@ struct lpfc_hba {
uint32_t cfg_poll;
uint32_t cfg_poll_tmo;
uint32_t cfg_use_msi;
+ uint32_t cfg_fcp_imax;
+ uint32_t cfg_fcp_wq_count;
+ uint32_t cfg_fcp_eq_count;
uint32_t cfg_sg_seg_cnt;
uint32_t cfg_prot_sg_seg_cnt;
uint32_t cfg_sg_dma_buf_size;
@@ -576,6 +599,8 @@ struct lpfc_hba {
uint32_t cfg_enable_hba_reset;
uint32_t cfg_enable_hba_heartbeat;
uint32_t cfg_enable_bg;
+ uint32_t cfg_enable_fip;
+ uint32_t cfg_log_verbose;
lpfc_vpd_t vpd; /* vital product data */
@@ -659,7 +684,8 @@ struct lpfc_hba {
/* pci_mem_pools */
struct pci_pool *lpfc_scsi_dma_buf_pool;
struct pci_pool *lpfc_mbuf_pool;
- struct pci_pool *lpfc_hbq_pool;
+ struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
+ struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
struct lpfc_dma_pool lpfc_mbuf_safety_pool;
mempool_t *mbox_mem_pool;
@@ -675,6 +701,14 @@ struct lpfc_hba {
struct lpfc_vport *pport; /* physical lpfc_vport pointer */
uint16_t max_vpi; /* Maximum virtual nports */
#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
+ uint16_t max_vports; /*
+ * For IOV HBAs max_vpi can change
+ * after a reset. max_vports is max
+ * number of vports present. This can
+ * be greater than max_vpi.
+ */
+ uint16_t vpi_base;
+ uint16_t vfi_base;
unsigned long *vpi_bmask; /* vpi allocation table */
/* Data structure used by fabric iocb scheduler */
@@ -733,6 +767,11 @@ struct lpfc_hba {
/* Maximum number of events that can be outstanding at any time*/
#define LPFC_MAX_EVT_COUNT 512
atomic_t fast_event_count;
+ struct lpfc_fcf fcf;
+ uint8_t fc_map[3];
+ uint8_t valid_vlan;
+ uint16_t vlan_id;
+ struct list_head fcf_conn_rec_list;
};
static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cb..82016fc 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -30,8 +30,10 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -828,18 +830,37 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
return 0;
}
- if (mrpi)
- *mrpi = pmb->un.varRdConfig.max_rpi;
- if (arpi)
- *arpi = pmb->un.varRdConfig.avail_rpi;
- if (mxri)
- *mxri = pmb->un.varRdConfig.max_xri;
- if (axri)
- *axri = pmb->un.varRdConfig.avail_xri;
- if (mvpi)
- *mvpi = pmb->un.varRdConfig.max_vpi;
- if (avpi)
- *avpi = pmb->un.varRdConfig.avail_vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rd_config = &pmboxq->u.mqe.un.rd_config;
+ if (mrpi)
+ *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ if (arpi)
+ *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.rpi_used;
+ if (mxri)
+ *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ if (axri)
+ *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.xri_used;
+ if (mvpi)
+ *mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ if (avpi)
+ *avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.vpi_used;
+ } else {
+ if (mrpi)
+ *mrpi = pmb->un.varRdConfig.max_rpi;
+ if (arpi)
+ *arpi = pmb->un.varRdConfig.avail_rpi;
+ if (mxri)
+ *mxri = pmb->un.varRdConfig.max_xri;
+ if (axri)
+ *axri = pmb->un.varRdConfig.avail_xri;
+ if (mvpi)
+ *mvpi = pmb->un.varRdConfig.max_vpi;
+ if (avpi)
+ *avpi = pmb->un.varRdConfig.avail_vpi;
+ }
mempool_free(pmboxq, phba->mbox_mem_pool);
return 1;
@@ -2844,15 +2865,39 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
-# 0 = MSI disabled
+# 0 = MSI disabled (default)
# 1 = MSI enabled
-# 2 = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+# 2 = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
*/
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+ "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+ "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+ "Set the number of fast-path FCP event queues, if possible");
+
+/*
# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
# 0 = HBA resets disabled
# 1 = HBA resets enabled (default)
@@ -2969,6 +3014,9 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_poll,
&dev_attr_lpfc_poll_tmo,
&dev_attr_lpfc_use_msi,
+ &dev_attr_lpfc_fcp_imax,
+ &dev_attr_lpfc_fcp_wq_count,
+ &dev_attr_lpfc_fcp_eq_count,
&dev_attr_lpfc_enable_bg,
&dev_attr_lpfc_soft_wwnn,
&dev_attr_lpfc_soft_wwpn,
@@ -4105,6 +4153,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_use_msi_init(phba, lpfc_use_msi);
+ lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+ lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+ lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
lpfc_enable_bg_init(phba, lpfc_enable_bg);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f..3802e45 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -35,17 +35,19 @@ int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
- LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+ LPFC_MBOXQ_t *, uint32_t);
void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rpis(struct lpfc_vport *, int);
int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
void lpfc_port_link_failure(struct lpfc_vport *);
void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -54,6 +56,7 @@ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -149,15 +152,19 @@ int lpfc_online(struct lpfc_hba *);
void lpfc_unblock_mgmt_io(struct lpfc_hba *);
void lpfc_offline_prep(struct lpfc_hba *);
void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
int lpfc_sli_setup(struct lpfc_hba *);
int lpfc_sli_queue_setup(struct lpfc_hba *);
void lpfc_handle_eratt(struct lpfc_hba *);
void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +172,32 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
uint32_t , LPFC_MBOXQ_t *);
struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+ uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
void lpfc_stop_vport_timers(struct lpfc_vport *);
void lpfc_poll_timeout(unsigned long ptr);
@@ -198,12 +221,13 @@ int lpfc_sli_host_down(struct lpfc_vport *);
int lpfc_sli_hba_down(struct lpfc_hba *);
int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +261,7 @@ struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, struct lpfc_iocbq *,
uint32_t);
void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +278,12 @@ void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
const char* lpfc_info(struct Scsi_Host *);
int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
void lpfc_get_cfgparam(struct lpfc_hba *);
void lpfc_get_vport_cfgparam(struct lpfc_vport *);
int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +344,15 @@ lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5
#define HBA_EVENT_LINK_UP 2
#define HBA_EVENT_LINK_DOWN 3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 4164b93..5199078 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -32,8 +32,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 5dd6692..42ef258 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -33,8 +33,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8c5c3ae..9fe36bf 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -220,7 +222,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = vport->vpi;
+ icmd->ulpContext = vport->vpi + phba->vpi_base;
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 25fc96c..0fc6600 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -29,10 +29,12 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
@@ -491,6 +493,10 @@ lpfc_work_done(struct lpfc_hba *phba)
phba->work_ha = 0;
spin_unlock_irq(&phba->hbalock);
+ /* First, try to post the next mailbox command to SLI4 device */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+ lpfc_sli4_post_async_mbox(phba);
+
if (ha_copy & HA_ERATT)
/* Handle the error attention event */
lpfc_handle_eratt(phba);
@@ -501,9 +507,27 @@ lpfc_work_done(struct lpfc_hba *phba)
if (ha_copy & HA_LATT)
lpfc_handle_latt(phba);
+ /* Process SLI4 events */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+ if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+ lpfc_sli4_fcp_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+ lpfc_sli4_els_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ASYNC_EVENT)
+ lpfc_sli4_async_event_proc(phba);
+ if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irq(&phba->hbalock);
+ lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+ }
+ if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+ lpfc_sli4_handle_received_buffer(phba);
+ }
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi; i++) {
+ for (i = 0; i <= phba->max_vports; i++) {
/*
* We could have no vports in array if unloading, so if
* this happens then just use the pport
@@ -2556,7 +2580,8 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
* clear_la then don't send it.
*/
if ((phba->link_state >= LPFC_CLEAR_LA) ||
- (vport->port_type != LPFC_PHYSICAL_PORT))
+ (vport->port_type != LPFC_PHYSICAL_PORT) ||
+ (phba->sli_rev == LPFC_SLI_REV4))
return;
/* Link up discovery */
@@ -2585,7 +2610,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (regvpimbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+ lpfc_reg_vpi(vport, regvpimbox);
regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
regvpimbox->vport = vport;
if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2645,7 +2670,8 @@ lpfc_disc_start(struct lpfc_vport *vport)
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_PT2PT) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b..a9d64cf 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -471,6 +471,35 @@ struct serv_parm { /* Structure is in Big Endian format */
};
/*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+ uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT 24
+#define fc_vft_hdr_r_ctl_MASK 0xFF
+#define fc_vft_hdr_r_ctl_WORD word0
+#define fc_vft_hdr_ver_SHIFT 22
+#define fc_vft_hdr_ver_MASK 0x3
+#define fc_vft_hdr_ver_WORD word0
+#define fc_vft_hdr_type_SHIFT 18
+#define fc_vft_hdr_type_MASK 0xF
+#define fc_vft_hdr_type_WORD word0
+#define fc_vft_hdr_e_SHIFT 16
+#define fc_vft_hdr_e_MASK 0x1
+#define fc_vft_hdr_e_WORD word0
+#define fc_vft_hdr_priority_SHIFT 13
+#define fc_vft_hdr_priority_MASK 0x7
+#define fc_vft_hdr_priority_WORD word0
+#define fc_vft_hdr_vf_id_SHIFT 1
+#define fc_vft_hdr_vf_id_MASK 0xFFF
+#define fc_vft_hdr_vf_id_WORD word0
+ uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT 24
+#define fc_vft_hdr_hopct_MASK 0xFF
+#define fc_vft_hdr_hopct_WORD word1
+};
+
+/*
* Extended Link Service LS_COMMAND codes (Payload Word 0)
*/
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@ typedef struct {
#define PCI_DEVICE_ID_HORNET 0xfe05
#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK 0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S 0x0705
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
@@ -1342,15 +1374,21 @@ typedef struct { /* FireFly BIU registers */
#define MBX_READ_LA64 0x95
#define MBX_REG_VPI 0x96
#define MBX_UNREG_VPI 0x97
-#define MBX_REG_VNPID 0x96
-#define MBX_UNREG_VNPID 0x97
#define MBX_WRITE_WWN 0x98
#define MBX_SET_DEBUG 0x99
#define MBX_LOAD_EXP_ROM 0x9C
-
-#define MBX_MAX_CMDS 0x9D
+#define MBX_SLI4_CONFIG 0x9B
+#define MBX_SLI4_REQ_FTRS 0x9D
+#define MBX_MAX_CMDS 0x9E
+#define MBX_RESUME_RPI 0x9E
#define MBX_SLI2_CMD_MASK 0x80
+#define MBX_REG_VFI 0x9F
+#define MBX_REG_FCFI 0xA0
+#define MBX_UNREG_VFI 0xA1
+#define MBX_UNREG_FCFI 0xA2
+#define MBX_INIT_VFI 0xA3
+#define MBX_INIT_VPI 0xA4
/* IOCB Commands */
@@ -1440,6 +1478,16 @@ typedef struct { /* FireFly BIU registers */
#define CMD_IOCB_LOGENTRY_CN 0x94
#define CMD_IOCB_LOGENTRY_ASYNC_CN 0x96
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 0xD8
+#define DSSCMD_IWRITE64_CX 0xD9
+#define DSSCMD_IREAD64_CR 0xDA
+#define DSSCMD_IREAD64_CX 0xDB
+#define DSSCMD_INVALIDATE_DEK 0xDC
+#define DSSCMD_SET_KEK 0xDD
+#define DSSCMD_GET_KEK_ID 0xDE
+#define DSSCMD_GEN_XFER 0xDF
+
#define CMD_MAX_IOCB_CMD 0xE6
#define CMD_IOCB_MASK 0xff
@@ -1466,6 +1514,7 @@ typedef struct { /* FireFly BIU registers */
#define MBXERR_BAD_RCV_LENGTH 14
#define MBXERR_DMA_ERROR 15
#define MBXERR_ERROR 16
+#define MBXERR_LINK_DOWN 0x33
#define MBX_NOT_FINISHED 255
#define MBX_BUSY 0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@ struct ulp_bde {
#endif
};
-struct ulp_bde64 { /* SLI-2 */
- union ULP_BDE_TUS {
- uint32_t w;
- struct {
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
- } f;
- } tus;
- uint32_t addrLow;
- uint32_t addrHigh;
-};
-
typedef struct ULP_BDL { /* SLI-2 */
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t bdeFlags:8; /* BDL Flags */
@@ -2287,7 +2310,7 @@ typedef struct {
uint32_t rsvd3;
uint32_t rsvd4;
uint32_t rsvd5;
- uint16_t rsvd6;
+ uint16_t vfi;
uint16_t vpi;
#else /* __LITTLE_ENDIAN */
uint32_t rsvd1;
@@ -2297,7 +2320,7 @@ typedef struct {
uint32_t rsvd4;
uint32_t rsvd5;
uint16_t vpi;
- uint16_t rsvd6;
+ uint16_t vfi;
#endif
} REG_VPI_VAR;
@@ -2457,7 +2480,7 @@ typedef struct {
uint32_t entry_index:16;
#endif
- uint32_t rsvd1;
+ uint32_t sli4_length;
uint32_t word_cnt;
uint32_t resp_offset;
} DUMP_VAR;
@@ -2470,9 +2493,32 @@ typedef struct {
#define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */
#define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */
+#define DMP_REGION_VPORT 0x16 /* VPort info region */
+#define DMP_VPORT_REGION_SIZE 0x200
+#define DMP_MBOX_OFFSET_WORD 0x5
+
+#define DMP_REGION_FCOEPARAM 0x17 /* fcoe param region */
+#define DMP_FCOEPARAM_RGN_SIZE 0x400
+
#define WAKE_UP_PARMS_REGION_ID 4
#define WAKE_UP_PARMS_WORD_SIZE 15
+struct vport_rec {
+ uint8_t wwpn[8];
+ uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+ uint32_t signature;
+ uint32_t rev;
+ struct vport_rec vport_list[MAX_STATIC_VPORT_COUNT];
+ uint32_t resvd[66];
+};
+
/* Option rom version structure */
struct prog_id {
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@ typedef struct {
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd1 : 19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
@@ -2717,10 +2765,14 @@ typedef struct {
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t cbg : 1; /* Configure BlockGuard */
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd1 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd3 : 19; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd4 : 3; /* Reserved */
uint32_t gbg : 1; /* Grant BlockGuard */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gcrp : 1; /* Grant Command Ring Polling */
@@ -2740,7 +2792,9 @@ typedef struct {
uint32_t gcrp : 1; /* Grant Command Ring Polling */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gbg : 1; /* Grant BlockGuard */
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd4 : 3; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@ typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
#else /* __LITTLE_ENDIAN */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
#endif
- uint32_t rsvd4; /* Reserved */
+ uint32_t rsvd6; /* Reserved */
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
#else /* __LITTLE_ENDIAN */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
#endif
} CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@ lpfc_error_lost_link(IOCB_t *iocbp)
#define MENLO_TIMEOUT 30
#define SETVAR_MLOMNT 0x103107
#define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 0000000..39c34b3
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ * struct temp {
+ * uint32_t field1;
+ * uint32_t field2;
+ * uint32_t field3;
+ * uint32_t field4;
+ * #define example_bit_field_SHIFT 7
+ * #define example_bit_field_MASK 0x03
+ * #define example_bit_field_WORD field4
+ * uint32_t field5;
+ * };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ * struct temp t1;
+ * value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ * bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ * bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+ uint32_t addr_lo;
+ uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0 1
+#define LPFC_SLI4_BAR1 2
+#define LPFC_SLI4_BAR2 4
+
+#define LPFC_SLI4_MBX_EMBED true
+#define LPFC_SLI4_MBX_NEMBED false
+
+#define LPFC_SLI4_MB_WORD_COUNT 64
+#define LPFC_MAX_MQ_PAGE 8
+#define LPFC_MAX_WQ_PAGE 8
+#define LPFC_MAX_CQ_PAGE 4
+#define LPFC_MAX_EQ_PAGE 8
+
+#define LPFC_VIR_FUNC_MAX 32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX 5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE 0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE 16
+#define LPFC_ALIGN_64_BYTE 64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET 256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE 0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI 0x2
+#define LPFC_BMBX_BIT1_ADDR_LO 0
+#define LPFC_RPI_HDR_COUNT 64
+#define LPFC_HDR_TEMPLATE_SIZE 4096
+#define LPFC_RPI_ALLOC_ERROR 0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT 132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX 0
+
+/* Virtual function numbers */
+#define LPFC_VF0 0
+#define LPFC_VF1 1
+#define LPFC_VF2 2
+#define LPFC_VF3 3
+#define LPFC_VF4 4
+#define LPFC_VF5 5
+#define LPFC_VF6 6
+#define LPFC_VF7 7
+#define LPFC_VF8 8
+#define LPFC_VF9 9
+#define LPFC_VF10 10
+#define LPFC_VF11 11
+#define LPFC_VF12 12
+#define LPFC_VF13 13
+#define LPFC_VF14 14
+#define LPFC_VF15 15
+#define LPFC_VF16 16
+#define LPFC_VF17 17
+#define LPFC_VF18 18
+#define LPFC_VF19 19
+#define LPFC_VF20 20
+#define LPFC_VF21 21
+#define LPFC_VF22 22
+#define LPFC_VF23 23
+#define LPFC_VF24 24
+#define LPFC_VF25 25
+#define LPFC_VF26 26
+#define LPFC_VF27 27
+#define LPFC_VF28 28
+#define LPFC_VF29 29
+#define LPFC_VF30 30
+#define LPFC_VF31 31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0 0
+#define LPFC_PCI_FUNC1 1
+#define LPFC_PCI_FUNC2 2
+#define LPFC_PCI_FUNC3 3
+#define LPFC_PCI_FUNC4 4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT 4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST 651042
+#define LPFC_MIM_IMAX 636
+#define LPFC_FP_DEF_IMAX 10000
+#define LPFC_SP_DEF_IMAX 10000
+
+struct ulp_bde64 {
+ union ULP_BDE_TUS {
+ uint32_t w;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
+ } f;
+ } tus;
+ uint32_t addrLow;
+ uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+ uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+ uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT 16
+#define lpfc_eqe_resource_id_MASK 0x000000FF
+#define lpfc_eqe_resource_id_WORD word0
+#define lpfc_eqe_minor_code_SHIFT 4
+#define lpfc_eqe_minor_code_MASK 0x00000FFF
+#define lpfc_eqe_minor_code_WORD word0
+#define lpfc_eqe_major_code_SHIFT 1
+#define lpfc_eqe_major_code_MASK 0x00000007
+#define lpfc_eqe_major_code_WORD word0
+#define lpfc_eqe_valid_SHIFT 0
+#define lpfc_eqe_valid_MASK 0x00000001
+#define lpfc_eqe_valid_WORD word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t word3;
+#define lpfc_cqe_valid_SHIFT 31
+#define lpfc_cqe_valid_MASK 0x00000001
+#define lpfc_cqe_valid_WORD word3
+#define lpfc_cqe_code_SHIFT 16
+#define lpfc_cqe_code_MASK 0x000000FF
+#define lpfc_cqe_code_WORD word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS 0x0
+#define CQE_STATUS_FCP_RSP_FAILURE 0x1
+#define CQE_STATUS_REMOTE_STOP 0x2
+#define CQE_STATUS_LOCAL_REJECT 0x3
+#define CQE_STATUS_NPORT_RJT 0x4
+#define CQE_STATUS_FABRIC_RJT 0x5
+#define CQE_STATUS_NPORT_BSY 0x6
+#define CQE_STATUS_FABRIC_BSY 0x7
+#define CQE_STATUS_INTERMED_RSP 0x8
+#define CQE_STATUS_LS_RJT 0x9
+#define CQE_STATUS_CMD_REJECT 0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK 0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY 0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR 0x0
+#define CQE_HW_STATUS_UNDERRUN 0x1
+#define CQE_HW_STATUS_OVERRUN 0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE 0x1
+#define CQE_CODE_RELEASE_WQE 0x2
+#define CQE_CODE_RECEIVE 0x4
+#define CQE_CODE_XRI_ABORTED 0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+ uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT 16
+#define lpfc_wcqe_c_request_tag_MASK 0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD word0
+#define lpfc_wcqe_c_status_SHIFT 8
+#define lpfc_wcqe_c_status_MASK 0x000000FF
+#define lpfc_wcqe_c_status_WORD word0
+#define lpfc_wcqe_c_hw_status_SHIFT 0
+#define lpfc_wcqe_c_hw_status_MASK 0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD word0
+ uint32_t total_data_placed;
+ uint32_t parameter;
+ uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT 28
+#define lpfc_wcqe_c_xb_MASK 0x00000001
+#define lpfc_wcqe_c_xb_WORD word3
+#define lpfc_wcqe_c_pv_SHIFT 27
+#define lpfc_wcqe_c_pv_MASK 0x00000001
+#define lpfc_wcqe_c_pv_WORD word3
+#define lpfc_wcqe_c_priority_SHIFT 24
+#define lpfc_wcqe_c_priority_MASK 0x00000007
+#define lpfc_wcqe_c_priority_WORD word3
+#define lpfc_wcqe_c_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT 16
+#define lpfc_wcqe_r_wq_id_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD word2
+#define lpfc_wcqe_r_wqe_index_SHIFT 0
+#define lpfc_wcqe_r_wqe_index_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+ uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT 8
+#define lpfc_wcqe_xa_status_MASK 0x000000FF
+#define lpfc_wcqe_xa_status_WORD word0
+ uint32_t parameter;
+ uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT 16
+#define lpfc_wcqe_xa_remote_xid_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD word2
+#define lpfc_wcqe_xa_xri_SHIFT 0
+#define lpfc_wcqe_xa_xri_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT 30
+#define lpfc_wcqe_xa_ia_MASK 0x00000001
+#define lpfc_wcqe_xa_ia_WORD word3
+#define CQE_XRI_ABORTED_IA_REMOTE 0
+#define CQE_XRI_ABORTED_IA_LOCAL 1
+#define lpfc_wcqe_xa_br_SHIFT 29
+#define lpfc_wcqe_xa_br_MASK 0x00000001
+#define lpfc_wcqe_xa_br_WORD word3
+#define CQE_XRI_ABORTED_BR_BA_ACC 0
+#define CQE_XRI_ABORTED_BR_BA_RJT 1
+#define lpfc_wcqe_xa_eo_SHIFT 28
+#define lpfc_wcqe_xa_eo_MASK 0x00000001
+#define lpfc_wcqe_xa_eo_WORD word3
+#define CQE_XRI_ABORTED_EO_REMOTE 0
+#define CQE_XRI_ABORTED_EO_LOCAL 1
+#define lpfc_wcqe_xa_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+ uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT 16
+#define lpfc_rcqe_bindex_MASK 0x0000FFF
+#define lpfc_rcqe_bindex_WORD word0
+#define lpfc_rcqe_status_SHIFT 8
+#define lpfc_rcqe_status_MASK 0x000000FF
+#define lpfc_rcqe_status_WORD word0
+#define FC_STATUS_RQ_SUCCESS 0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 0x13 /* Frame Discard */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rcqe_length_SHIFT 16
+#define lpfc_rcqe_length_MASK 0x0000FFFF
+#define lpfc_rcqe_length_WORD word2
+#define lpfc_rcqe_rq_id_SHIFT 6
+#define lpfc_rcqe_rq_id_MASK 0x000003FF
+#define lpfc_rcqe_rq_id_WORD word2
+#define lpfc_rcqe_fcf_id_SHIFT 0
+#define lpfc_rcqe_fcf_id_MASK 0x0000003F
+#define lpfc_rcqe_fcf_id_WORD word2
+ uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT 30
+#define lpfc_rcqe_port_MASK 0x00000001
+#define lpfc_rcqe_port_WORD word3
+#define lpfc_rcqe_hdr_length_SHIFT 24
+#define lpfc_rcqe_hdr_length_MASK 0x0000001F
+#define lpfc_rcqe_hdr_length_WORD word3
+#define lpfc_rcqe_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT 8
+#define lpfc_rcqe_eof_MASK 0x000000FF
+#define lpfc_rcqe_eof_WORD word3
+#define FCOE_EOFn 0x41
+#define FCOE_EOFt 0x42
+#define FCOE_EOFni 0x49
+#define FCOE_EOFa 0x50
+#define lpfc_rcqe_sof_SHIFT 0
+#define lpfc_rcqe_sof_MASK 0x000000FF
+#define lpfc_rcqe_sof_WORD word3
+#define FCOE_SOFi2 0x2d
+#define FCOE_SOFi3 0x2e
+#define FCOE_SOFn2 0x35
+#define FCOE_SOFn3 0x36
+};
+
+struct lpfc_wqe_generic{
+ struct ulp_bde64 bde;
+ uint32_t word3;
+ uint32_t word4;
+ uint32_t word5;
+ uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT 16
+#define lpfc_wqe_gen_context_MASK 0x0000FFFF
+#define lpfc_wqe_gen_context_WORD word6
+#define lpfc_wqe_gen_xri_SHIFT 0
+#define lpfc_wqe_gen_xri_MASK 0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD word6
+ uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT 23
+#define lpfc_wqe_gen_lnk_MASK 0x00000001
+#define lpfc_wqe_gen_lnk_WORD word7
+#define lpfc_wqe_gen_erp_SHIFT 22
+#define lpfc_wqe_gen_erp_MASK 0x00000001
+#define lpfc_wqe_gen_erp_WORD word7
+#define lpfc_wqe_gen_pu_SHIFT 20
+#define lpfc_wqe_gen_pu_MASK 0x00000003
+#define lpfc_wqe_gen_pu_WORD word7
+#define lpfc_wqe_gen_class_SHIFT 16
+#define lpfc_wqe_gen_class_MASK 0x00000007
+#define lpfc_wqe_gen_class_WORD word7
+#define lpfc_wqe_gen_command_SHIFT 8
+#define lpfc_wqe_gen_command_MASK 0x000000FF
+#define lpfc_wqe_gen_command_WORD word7
+#define lpfc_wqe_gen_status_SHIFT 4
+#define lpfc_wqe_gen_status_MASK 0x0000000F
+#define lpfc_wqe_gen_status_WORD word7
+#define lpfc_wqe_gen_ct_SHIFT 2
+#define lpfc_wqe_gen_ct_MASK 0x00000007
+#define lpfc_wqe_gen_ct_WORD word7
+ uint32_t abort_tag;
+ uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT 0
+#define lpfc_wqe_gen_request_tag_MASK 0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD word9
+ uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT 24
+#define lpfc_wqe_gen_ccp_MASK 0x000000FF
+#define lpfc_wqe_gen_ccp_WORD word10
+#define lpfc_wqe_gen_ccpe_SHIFT 23
+#define lpfc_wqe_gen_ccpe_MASK 0x00000001
+#define lpfc_wqe_gen_ccpe_WORD word10
+#define lpfc_wqe_gen_pv_SHIFT 19
+#define lpfc_wqe_gen_pv_MASK 0x00000001
+#define lpfc_wqe_gen_pv_WORD word10
+#define lpfc_wqe_gen_pri_SHIFT 16
+#define lpfc_wqe_gen_pri_MASK 0x00000007
+#define lpfc_wqe_gen_pri_WORD word10
+ uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT 16
+#define lpfc_wqe_gen_cq_id_MASK 0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD word11
+#define LPFC_WQE_CQ_ID_DEFAULT 0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT 7
+#define lpfc_wqe_gen_wqec_MASK 0x00000001
+#define lpfc_wqe_gen_wqec_WORD word11
+#define lpfc_wqe_gen_cmd_type_SHIFT 0
+#define lpfc_wqe_gen_cmd_type_MASK 0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD word11
+ uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+ uint32_t address_hi;
+ uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+ uint32_t word2;
+#define lpfc_bde4_last_SHIFT 31
+#define lpfc_bde4_last_MASK 0x00000001
+#define lpfc_bde4_last_WORD word2
+#define lpfc_bde4_sge_offset_SHIFT 0
+#define lpfc_bde4_sge_offset_MASK 0x000003FF
+#define lpfc_bde4_sge_offset_WORD word2
+ uint32_t word3;
+#define lpfc_bde4_length_SHIFT 0
+#define lpfc_bde4_length_MASK 0x000000FF
+#define lpfc_bde4_length_WORD word3
+};
+
+struct lpfc_register {
+ uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI 0x00A4
+#define LPFC_UERR_STATUS_LO 0x00A0
+#define LPFC_ONLINE0 0x00B0
+#define LPFC_ONLINE1 0x00B4
+#define LPFC_SCRATCHPAD 0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE 0x00AC
+#define lpfc_hst_state_perr_SHIFT 31
+#define lpfc_hst_state_perr_MASK 0x1
+#define lpfc_hst_state_perr_WORD word0
+#define lpfc_hst_state_sfi_SHIFT 30
+#define lpfc_hst_state_sfi_MASK 0x1
+#define lpfc_hst_state_sfi_WORD word0
+#define lpfc_hst_state_nip_SHIFT 29
+#define lpfc_hst_state_nip_MASK 0x1
+#define lpfc_hst_state_nip_WORD word0
+#define lpfc_hst_state_ipc_SHIFT 28
+#define lpfc_hst_state_ipc_MASK 0x1
+#define lpfc_hst_state_ipc_WORD word0
+#define lpfc_hst_state_xrom_SHIFT 27
+#define lpfc_hst_state_xrom_MASK 0x1
+#define lpfc_hst_state_xrom_WORD word0
+#define lpfc_hst_state_dl_SHIFT 26
+#define lpfc_hst_state_dl_MASK 0x1
+#define lpfc_hst_state_dl_WORD word0
+#define lpfc_hst_state_port_status_SHIFT 0
+#define lpfc_hst_state_port_status_MASK 0xFFFF
+#define lpfc_hst_state_port_status_WORD word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET 0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY 0x0001
+#define LPFC_POST_STAGE_HOST_RDY 0x0002
+#define LPFC_POST_STAGE_BE_RESET 0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START 0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE 0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START 0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE 0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START 0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE 0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START 0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE 0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START 0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE 0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START 0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE 0x0701
+#define LPFC_POST_STAGE_ARMFW_START 0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START 0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE 0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START 0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE 0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET 0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK 0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE 0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP 0x0B03
+#define LPFC_POST_STAGE_PARSE_XML 0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE 0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE 0x0B06
+#define LPFC_POST_STAGE_RC_DONE 0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM 0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS 0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY 0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT 4
+#define lpfc_scratchpad_slirev_MASK 0xF
+#define lpfc_scratchpad_slirev_WORD word0
+#define lpfc_scratchpad_chiptype_SHIFT 8
+#define lpfc_scratchpad_chiptype_MASK 0xFF
+#define lpfc_scratchpad_chiptype_WORD word0
+#define lpfc_scratchpad_featurelevel1_SHIFT 16
+#define lpfc_scratchpad_featurelevel1_MASK 0xFF
+#define lpfc_scratchpad_featurelevel1_WORD word0
+#define lpfc_scratchpad_featurelevel2_SHIFT 24
+#define lpfc_scratchpad_featurelevel2_MASK 0xFF
+#define lpfc_scratchpad_featurelevel2_WORD word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
+
+#define LPFC_HST_ISR0 0x0C18
+#define LPFC_HST_ISR1 0x0C1C
+#define LPFC_HST_ISR2 0x0C20
+#define LPFC_HST_ISR3 0x0C24
+#define LPFC_HST_ISR4 0x0C28
+
+#define LPFC_HST_IMR0 0x0C48
+#define LPFC_HST_IMR1 0x0C4C
+#define LPFC_HST_IMR2 0x0C50
+#define LPFC_HST_IMR3 0x0C54
+#define LPFC_HST_IMR4 0x0C58
+
+#define LPFC_HST_ISCR0 0x0C78
+#define LPFC_HST_ISCR1 0x0C7C
+#define LPFC_HST_ISCR2 0x0C80
+#define LPFC_HST_ISCR3 0x0C84
+#define LPFC_HST_ISCR4 0x0C88
+
+#define LPFC_SLI4_INTR0 BIT0
+#define LPFC_SLI4_INTR1 BIT1
+#define LPFC_SLI4_INTR2 BIT2
+#define LPFC_SLI4_INTR3 BIT3
+#define LPFC_SLI4_INTR4 BIT4
+#define LPFC_SLI4_INTR5 BIT5
+#define LPFC_SLI4_INTR6 BIT6
+#define LPFC_SLI4_INTR7 BIT7
+#define LPFC_SLI4_INTR8 BIT8
+#define LPFC_SLI4_INTR9 BIT9
+#define LPFC_SLI4_INTR10 BIT10
+#define LPFC_SLI4_INTR11 BIT11
+#define LPFC_SLI4_INTR12 BIT12
+#define LPFC_SLI4_INTR13 BIT13
+#define LPFC_SLI4_INTR14 BIT14
+#define LPFC_SLI4_INTR15 BIT15
+#define LPFC_SLI4_INTR16 BIT16
+#define LPFC_SLI4_INTR17 BIT17
+#define LPFC_SLI4_INTR18 BIT18
+#define LPFC_SLI4_INTR19 BIT19
+#define LPFC_SLI4_INTR20 BIT20
+#define LPFC_SLI4_INTR21 BIT21
+#define LPFC_SLI4_INTR22 BIT22
+#define LPFC_SLI4_INTR23 BIT23
+#define LPFC_SLI4_INTR24 BIT24
+#define LPFC_SLI4_INTR25 BIT25
+#define LPFC_SLI4_INTR26 BIT26
+#define LPFC_SLI4_INTR27 BIT27
+#define LPFC_SLI4_INTR28 BIT28
+#define LPFC_SLI4_INTR29 BIT29
+#define LPFC_SLI4_INTR30 BIT30
+#define LPFC_SLI4_INTR31 BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL 0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT 16
+#define lpfc_rq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD word0
+#define LPFC_RQ_POST_BATCH 8 /* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT 0
+#define lpfc_rq_doorbell_id_MASK 0x03FF
+#define lpfc_rq_doorbell_id_WORD word0
+
+#define LPFC_WQ_DOORBELL 0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT 24
+#define lpfc_wq_doorbell_num_posted_MASK 0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD word0
+#define lpfc_wq_doorbell_index_SHIFT 16
+#define lpfc_wq_doorbell_index_MASK 0x00FF
+#define lpfc_wq_doorbell_index_WORD word0
+#define lpfc_wq_doorbell_id_SHIFT 0
+#define lpfc_wq_doorbell_id_MASK 0xFFFF
+#define lpfc_wq_doorbell_id_WORD word0
+
+#define LPFC_EQCQ_DOORBELL 0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT 29
+#define lpfc_eqcq_doorbell_arm_MASK 0x0001
+#define lpfc_eqcq_doorbell_arm_WORD word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT 16
+#define lpfc_eqcq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD word0
+#define lpfc_eqcq_doorbell_qt_SHIFT 10
+#define lpfc_eqcq_doorbell_qt_MASK 0x0001
+#define lpfc_eqcq_doorbell_qt_WORD word0
+#define LPFC_QUEUE_TYPE_COMPLETION 0
+#define LPFC_QUEUE_TYPE_EVENT 1
+#define lpfc_eqcq_doorbell_eqci_SHIFT 9
+#define lpfc_eqcq_doorbell_eqci_MASK 0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT 0
+#define lpfc_eqcq_doorbell_cqid_MASK 0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT 0
+#define lpfc_eqcq_doorbell_eqid_MASK 0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD word0
+
+#define LPFC_BMBX 0x0160
+#define lpfc_bmbx_addr_SHIFT 2
+#define lpfc_bmbx_addr_MASK 0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD word0
+#define lpfc_bmbx_hi_SHIFT 1
+#define lpfc_bmbx_hi_MASK 0x0001
+#define lpfc_bmbx_hi_WORD word0
+#define lpfc_bmbx_rdy_SHIFT 0
+#define lpfc_bmbx_rdy_MASK 0x0001
+#define lpfc_bmbx_rdy_WORD word0
+
+#define LPFC_MQ_DOORBELL 0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT 16
+#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD word0
+#define lpfc_mq_doorbell_id_SHIFT 0
+#define lpfc_mq_doorbell_id_MASK 0x03FF
+#define lpfc_mq_doorbell_id_WORD word0
+
+struct lpfc_sli4_cfg_mhdr {
+ uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT 0
+#define lpfc_mbox_hdr_emb_MASK 0x00000001
+#define lpfc_mbox_hdr_emb_WORD word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT 3
+#define lpfc_mbox_hdr_sge_cnt_MASK 0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD word1
+ uint32_t payload_length;
+ uint32_t tag_lo;
+ uint32_t tag_hi;
+ uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_port_number_SHIFT 16
+#define lpfc_mbox_hdr_port_number_MASK 0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t timeout;
+ uint32_t request_length;
+ uint32_t reserved9;
+ } request;
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT 0
+#define lpfc_mbox_hdr_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_status_WORD word7
+#define lpfc_mbox_hdr_add_status_SHIFT 8
+#define lpfc_mbox_hdr_add_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD word7
+ uint32_t response_length;
+ uint32_t actual_response_length;
+ } response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0 0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1 0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
+#define LPFC_MBOX_OPCODE_NOP 0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY 0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES 0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES 0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE 0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY 0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE 0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF 0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+ uint32_t word0;
+#define lpfc_eq_context_size_SHIFT 31
+#define lpfc_eq_context_size_MASK 0x00000001
+#define lpfc_eq_context_size_WORD word0
+#define LPFC_EQE_SIZE_4 0x0
+#define LPFC_EQE_SIZE_16 0x1
+#define lpfc_eq_context_valid_SHIFT 29
+#define lpfc_eq_context_valid_MASK 0x00000001
+#define lpfc_eq_context_valid_WORD word0
+ uint32_t word1;
+#define lpfc_eq_context_count_SHIFT 26
+#define lpfc_eq_context_count_MASK 0x00000003
+#define lpfc_eq_context_count_WORD word1
+#define LPFC_EQ_CNT_256 0x0
+#define LPFC_EQ_CNT_512 0x1
+#define LPFC_EQ_CNT_1024 0x2
+#define LPFC_EQ_CNT_2048 0x3
+#define LPFC_EQ_CNT_4096 0x4
+ uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT 13
+#define lpfc_eq_context_delay_multi_MASK 0x000003FF
+#define lpfc_eq_context_delay_multi_WORD word2
+ uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+ uint32_t sgl_pg0_addr_lo;
+ uint32_t sgl_pg0_addr_hi;
+ uint32_t sgl_pg1_addr_lo;
+ uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+ struct mbox_header header;
+ uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT 0
+#define lpfc_post_sgl_pages_xri_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT 16
+#define lpfc_post_sgl_pages_xricnt_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD word0
+ struct sgl_page_pairs sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word0;
+ struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+ uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES 19
+ struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+ void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT 0
+#define lpfc_mbx_eq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD word0
+ struct eq_context context;
+ struct dma_address page[LPFC_MAX_EQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT 0
+#define lpfc_mbx_eq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_eq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_eq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_nop {
+ struct mbox_header header;
+ uint32_t context[2];
+};
+
+struct cq_context {
+ uint32_t word0;
+#define lpfc_cq_context_event_SHIFT 31
+#define lpfc_cq_context_event_MASK 0x00000001
+#define lpfc_cq_context_event_WORD word0
+#define lpfc_cq_context_valid_SHIFT 29
+#define lpfc_cq_context_valid_MASK 0x00000001
+#define lpfc_cq_context_valid_WORD word0
+#define lpfc_cq_context_count_SHIFT 27
+#define lpfc_cq_context_count_MASK 0x00000003
+#define lpfc_cq_context_count_WORD word0
+#define LPFC_CQ_CNT_256 0x0
+#define LPFC_CQ_CNT_512 0x1
+#define LPFC_CQ_CNT_1024 0x2
+ uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT 22
+#define lpfc_cq_eq_id_MASK 0x000000FF
+#define lpfc_cq_eq_id_WORD word1
+ uint32_t reserved0;
+ uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT 0
+#define lpfc_mbx_cq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD word0
+ struct cq_context context;
+ struct dma_address page[LPFC_MAX_CQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT 0
+#define lpfc_mbx_cq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_cq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_cq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct wq_context {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT 0
+#define lpfc_mbx_wq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT 16
+#define lpfc_mbx_wq_create_cq_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD word0
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT 0
+#define lpfc_mbx_wq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_wq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_wq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+ uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT 16
+#define lpfc_rq_context_rq_size_MASK 0x0000000F
+#define lpfc_rq_context_rq_size_WORD word0
+#define LPFC_RQ_RING_SIZE_512 9 /* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024 10 /* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048 11 /* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096 12 /* 4096 entries */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT 16
+#define lpfc_rq_context_cq_id_MASK 0x000003FF
+#define lpfc_rq_context_cq_id_WORD word2
+#define lpfc_rq_context_buf_size_SHIFT 0
+#define lpfc_rq_context_buf_size_MASK 0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD word2
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT 0
+#define lpfc_mbx_rq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD word0
+ struct rq_context context;
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT 0
+#define lpfc_mbx_rq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_rq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_rq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct mq_context {
+ uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT 22
+#define lpfc_mq_context_cq_id_MASK 0x000003FF
+#define lpfc_mq_context_cq_id_WORD word0
+#define lpfc_mq_context_count_SHIFT 16
+#define lpfc_mq_context_count_MASK 0x0000000F
+#define lpfc_mq_context_count_WORD word0
+#define LPFC_MQ_CNT_16 0x5
+#define LPFC_MQ_CNT_32 0x6
+#define LPFC_MQ_CNT_64 0x7
+#define LPFC_MQ_CNT_128 0x8
+ uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT 31
+#define lpfc_mq_context_valid_MASK 0x00000001
+#define lpfc_mq_context_valid_WORD word1
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT 0
+#define lpfc_mbx_mq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD word0
+ struct mq_context context;
+ struct dma_address page[LPFC_MAX_MQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT 0
+#define lpfc_mbx_mq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_mq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_mq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT 0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT 16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD word10
+ uint32_t rpi_paddr_lo;
+ uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge { /* SLI-4 */
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+
+ uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK 0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD word2
+#define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets
+ this flag !! */
+#define lpfc_sli4_sge_last_MASK 0x00000001
+#define lpfc_sli4_sge_last_WORD word2
+ uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT 0
+#define lpfc_sli4_sge_len_MASK 0x0001FFFF
+#define lpfc_sli4_sge_len_WORD word3
+};
+
+struct fcf_record {
+ uint32_t max_rcv_size;
+ uint32_t fka_adv_period;
+ uint32_t fip_priority;
+ uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT 0
+#define lpfc_fcf_record_mac_0_MASK 0x000000FF
+#define lpfc_fcf_record_mac_0_WORD word3
+#define lpfc_fcf_record_mac_1_SHIFT 8
+#define lpfc_fcf_record_mac_1_MASK 0x000000FF
+#define lpfc_fcf_record_mac_1_WORD word3
+#define lpfc_fcf_record_mac_2_SHIFT 16
+#define lpfc_fcf_record_mac_2_MASK 0x000000FF
+#define lpfc_fcf_record_mac_2_WORD word3
+#define lpfc_fcf_record_mac_3_SHIFT 24
+#define lpfc_fcf_record_mac_3_MASK 0x000000FF
+#define lpfc_fcf_record_mac_3_WORD word3
+ uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT 0
+#define lpfc_fcf_record_mac_4_MASK 0x000000FF
+#define lpfc_fcf_record_mac_4_WORD word4
+#define lpfc_fcf_record_mac_5_SHIFT 8
+#define lpfc_fcf_record_mac_5_MASK 0x000000FF
+#define lpfc_fcf_record_mac_5_WORD word4
+#define lpfc_fcf_record_fcf_avail_SHIFT 16
+#define lpfc_fcf_record_fcf_avail_MASK 0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT 24
+#define lpfc_fcf_record_mac_addr_prov_MASK 0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD word4
+#define LPFC_FCF_FPMA 1 /* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA 2 /* Server Provided MAC Address */
+ uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT 0
+#define lpfc_fcf_record_fab_name_0_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD word5
+#define lpfc_fcf_record_fab_name_1_SHIFT 8
+#define lpfc_fcf_record_fab_name_1_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD word5
+#define lpfc_fcf_record_fab_name_2_SHIFT 16
+#define lpfc_fcf_record_fab_name_2_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD word5
+#define lpfc_fcf_record_fab_name_3_SHIFT 24
+#define lpfc_fcf_record_fab_name_3_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD word5
+ uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT 0
+#define lpfc_fcf_record_fab_name_4_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD word6
+#define lpfc_fcf_record_fab_name_5_SHIFT 8
+#define lpfc_fcf_record_fab_name_5_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD word6
+#define lpfc_fcf_record_fab_name_6_SHIFT 16
+#define lpfc_fcf_record_fab_name_6_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD word6
+#define lpfc_fcf_record_fab_name_7_SHIFT 24
+#define lpfc_fcf_record_fab_name_7_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD word6
+ uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT 0
+#define lpfc_fcf_record_fc_map_0_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD word7
+#define lpfc_fcf_record_fc_map_1_SHIFT 8
+#define lpfc_fcf_record_fc_map_1_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD word7
+#define lpfc_fcf_record_fc_map_2_SHIFT 16
+#define lpfc_fcf_record_fc_map_2_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD word7
+#define lpfc_fcf_record_fcf_valid_SHIFT 24
+#define lpfc_fcf_record_fcf_valid_MASK 0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD word7
+ uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT 0
+#define lpfc_fcf_record_fcf_index_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD word8
+#define lpfc_fcf_record_fcf_state_SHIFT 16
+#define lpfc_fcf_record_fcf_state_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD word8
+ uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ union {
+ struct {
+ uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD word10
+ } request;
+ struct {
+ uint32_t eventag;
+ } response;
+ } u;
+ uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT 0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK 0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD word10
+ struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT 0
+#define lpfc_mbx_del_fcf_tbl_count_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT 16
+#define lpfc_mbx_del_fcf_tbl_index_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS 0x0
+#define STATUS_FAILED 0x1
+#define STATUS_ILLEGAL_REQUEST 0x2
+#define STATUS_ILLEGAL_FIELD 0x3
+#define STATUS_INSUFFICIENT_BUFFER 0x4
+#define STATUS_UNAUTHORIZED_REQUEST 0x5
+#define STATUS_FLASHROM_SAVE_FAILED 0x17
+#define STATUS_FLASHROM_RESTORE_FAILED 0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED 0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM 0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM 0x1d
+#define STATUS_ASSERT_FAILED 0x1e
+#define STATUS_INVALID_SESSION 0x1f
+#define STATUS_INVALID_CONNECTION 0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT 0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH 0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID 0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND 0x26
+#define STATUS_FLASHROM_READ_FAILED 0x27
+#define STATUS_POLL_IOCTL_TIMEOUT 0x28
+#define STATUS_ERROR_ACITMAIN 0x2a
+#define STATUS_REBOOT_REQUIRED 0x2c
+#define STATUS_FCF_IN_USE 0x3a
+
+struct lpfc_mbx_sli4_config {
+ struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+ uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT 31
+#define lpfc_init_vfi_vr_MASK 0x00000001
+#define lpfc_init_vfi_vr_WORD word1
+#define lpfc_init_vfi_vt_SHIFT 30
+#define lpfc_init_vfi_vt_MASK 0x00000001
+#define lpfc_init_vfi_vt_WORD word1
+#define lpfc_init_vfi_vf_SHIFT 29
+#define lpfc_init_vfi_vf_MASK 0x00000001
+#define lpfc_init_vfi_vf_WORD word1
+#define lpfc_init_vfi_vfi_SHIFT 0
+#define lpfc_init_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT 0
+#define lpfc_init_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD word2
+ uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT 13
+#define lpfc_init_vfi_pri_MASK 0x00000007
+#define lpfc_init_vfi_pri_WORD word3
+#define lpfc_init_vfi_vf_id_SHIFT 1
+#define lpfc_init_vfi_vf_id_MASK 0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD word3
+ uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT 24
+#define lpfc_init_vfi_hop_count_MASK 0x000000FF
+#define lpfc_init_vfi_hop_count_WORD word4
+};
+
+struct lpfc_mbx_reg_vfi {
+ uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT 28
+#define lpfc_reg_vfi_vp_MASK 0x00000001
+#define lpfc_reg_vfi_vp_WORD word1
+#define lpfc_reg_vfi_vfi_SHIFT 0
+#define lpfc_reg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT 16
+#define lpfc_reg_vfi_vpi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD word2
+#define lpfc_reg_vfi_fcfi_SHIFT 0
+#define lpfc_reg_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ struct ulp_bde64 bde;
+ uint32_t word8_rsvd;
+ uint32_t word9_rsvd;
+ uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT 0
+#define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD word10
+};
+
+struct lpfc_mbx_init_vpi {
+ uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT 16
+#define lpfc_init_vpi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD word1
+#define lpfc_init_vpi_vpi_SHIFT 0
+#define lpfc_init_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD word1
+};
+
+struct lpfc_mbx_read_vpi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT 0
+#define lpfc_mbx_read_vpi_vnportid_MASK 0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT 0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD word4
+#define lpfc_mbx_read_vpi_pb_SHIFT 15
+#define lpfc_mbx_read_vpi_pb_MASK 0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT 16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD word4
+#define lpfc_mbx_read_vpi_ns_SHIFT 30
+#define lpfc_mbx_read_vpi_ns_MASK 0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD word4
+#define lpfc_mbx_read_vpi_hl_SHIFT 31
+#define lpfc_mbx_read_vpi_hl_MASK 0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD word4
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT 0
+#define lpfc_mbx_read_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_0_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_1_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT 16
+#define lpfc_mbx_read_vpi_mac_2_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT 24
+#define lpfc_mbx_read_vpi_mac_3_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_4_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_5_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT 16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK 0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD word8
+#define lpfc_mbx_read_vpi_vv_SHIFT 28
+#define lpfc_mbx_read_vpi_vv_MASK 0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT 0
+#define lpfc_unreg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD word2
+};
+
+struct lpfc_mbx_resume_rpi {
+ uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT 0
+#define lpfc_resume_rpi_rpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD word1
+ uint32_t event_tag;
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT 0
+#define lpfc_resume_rpi_vpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD word6
+#define lpfc_resume_rpi_vfi_SHIFT 16
+#define lpfc_resume_rpi_vfi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD word6
+};
+
+#define REG_FCF_INVALID_QID 0xFFFF
+struct lpfc_mbx_reg_fcfi {
+ uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT 0
+#define lpfc_reg_fcfi_info_index_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD word1
+#define lpfc_reg_fcfi_fcfi_SHIFT 16
+#define lpfc_reg_fcfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT 0
+#define lpfc_reg_fcfi_rq_id1_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT 16
+#define lpfc_reg_fcfi_rq_id0_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD word2
+ uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT 0
+#define lpfc_reg_fcfi_rq_id3_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT 16
+#define lpfc_reg_fcfi_rq_id2_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD word3
+ uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT 24
+#define lpfc_reg_fcfi_type_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT 16
+#define lpfc_reg_fcfi_type_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD word4
+ uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT 24
+#define lpfc_reg_fcfi_type_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT 16
+#define lpfc_reg_fcfi_type_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD word5
+ uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT 24
+#define lpfc_reg_fcfi_type_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT 16
+#define lpfc_reg_fcfi_type_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD word6
+ uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT 24
+#define lpfc_reg_fcfi_type_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT 16
+#define lpfc_reg_fcfi_type_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD word7
+ uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT 13
+#define lpfc_reg_fcfi_mam_MASK 0x00000003
+#define lpfc_reg_fcfi_mam_WORD word8
+#define LPFC_MAM_BOTH 0 /* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA 1 /* Server Provided MAC Address */
+#define LPFC_MAM_FPMA 2 /* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT 12
+#define lpfc_reg_fcfi_vv_MASK 0x00000001
+#define lpfc_reg_fcfi_vv_WORD word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT 0
+#define lpfc_reg_fcfi_vlan_tag_MASK 0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+ uint32_t word1_rsv;
+ uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT 0
+#define lpfc_unreg_fcfi_MASK 0x0000FFFF
+#define lpfc_unreg_fcfi_WORD word2
+};
+
+struct lpfc_mbx_read_rev {
+ uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT 16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK 0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT 20
+#define lpfc_mbx_rd_rev_fcoe_MASK 0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT 29
+#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD word1
+ uint32_t first_hw_rev;
+ uint32_t second_hw_rev;
+ uint32_t word4_rsvd;
+ uint32_t third_hw_rev;
+ uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT 0
+#define lpfc_mbx_rd_rev_fcph_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT 8
+#define lpfc_mbx_rd_rev_fcph_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT 16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT 24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD word6
+ uint32_t word7_rsvd;
+ uint32_t fw_id_rev;
+ uint8_t fw_name[16];
+ uint32_t ulp_fw_id_rev;
+ uint8_t ulp_fw_name[16];
+ uint32_t word18_47_rsvd[30];
+ uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT 0
+#define lpfc_mbx_rd_rev_avail_len_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD word48
+ uint32_t vpd_paddr_low;
+ uint32_t vpd_paddr_high;
+ uint32_t avail_vpd_len;
+ uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+ uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0
+#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8
+#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT 0
+#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD word2
+#define lpfc_mbx_rd_conf_topology_SHIFT 24
+#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT 0
+#define lpfc_mbx_rd_conf_ao_MASK 0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8
+#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD word3
+#define lpfc_mbx_rd_conf_mc_SHIFT 29
+#define lpfc_mbx_rd_conf_mc_MASK 0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD word3
+ uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD word4
+ uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD word5
+ uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD word8
+ uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT 0
+#define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD word9
+ uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0
+#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD word10
+ uint32_t word11_rsvd;
+ uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT 0
+#define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT 16
+#define lpfc_mbx_rd_conf_xri_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD word12
+ uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_rpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_rpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD word13
+ uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD word14
+ uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD word15
+ uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD word16
+ uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_rq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_eq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD word17
+ uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_wq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_cq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD word18
+};
+
+struct lpfc_mbx_request_features {
+ uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT 0
+#define lpfc_mbx_rq_ftr_qry_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER 0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES 0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4
+#define MB_CQE_STATUS_DMA_FAILED 0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+ uint32_t word0;
+#define lpfc_mqe_status_SHIFT 16
+#define lpfc_mqe_status_MASK 0x0000FFFF
+#define lpfc_mqe_status_WORD word0
+#define lpfc_mqe_command_SHIFT 8
+#define lpfc_mqe_command_MASK 0x000000FF
+#define lpfc_mqe_command_WORD word0
+ union {
+ uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+ /* sli4 mailbox commands */
+ struct lpfc_mbx_sli4_config sli4_config;
+ struct lpfc_mbx_init_vfi init_vfi;
+ struct lpfc_mbx_reg_vfi reg_vfi;
+ struct lpfc_mbx_reg_vfi unreg_vfi;
+ struct lpfc_mbx_init_vpi init_vpi;
+ struct lpfc_mbx_resume_rpi resume_rpi;
+ struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+ struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+ struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+ struct lpfc_mbx_reg_fcfi reg_fcfi;
+ struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+ struct lpfc_mbx_mq_create mq_create;
+ struct lpfc_mbx_eq_create eq_create;
+ struct lpfc_mbx_cq_create cq_create;
+ struct lpfc_mbx_wq_create wq_create;
+ struct lpfc_mbx_rq_create rq_create;
+ struct lpfc_mbx_mq_destroy mq_destroy;
+ struct lpfc_mbx_eq_destroy eq_destroy;
+ struct lpfc_mbx_cq_destroy cq_destroy;
+ struct lpfc_mbx_wq_destroy wq_destroy;
+ struct lpfc_mbx_rq_destroy rq_destroy;
+ struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+ struct lpfc_mbx_nembed_cmd nembed_cmd;
+ struct lpfc_mbx_read_rev read_rev;
+ struct lpfc_mbx_read_vpi read_vpi;
+ struct lpfc_mbx_read_config rd_config;
+ struct lpfc_mbx_request_features req_ftrs;
+ struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+ struct lpfc_mbx_nop nop;
+ } un;
+};
+
+struct lpfc_mcqe {
+ uint32_t word0;
+#define lpfc_mcqe_status_SHIFT 0
+#define lpfc_mcqe_status_MASK 0x0000FFFF
+#define lpfc_mcqe_status_WORD word0
+#define lpfc_mcqe_ext_status_SHIFT 16
+#define lpfc_mcqe_ext_status_MASK 0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD word0
+ uint32_t mcqe_tag0;
+ uint32_t mcqe_tag1;
+ uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT 31
+#define lpfc_trailer_valid_MASK 0x00000001
+#define lpfc_trailer_valid_WORD trailer
+#define lpfc_trailer_async_SHIFT 30
+#define lpfc_trailer_async_MASK 0x00000001
+#define lpfc_trailer_async_WORD trailer
+#define lpfc_trailer_hpi_SHIFT 29
+#define lpfc_trailer_hpi_MASK 0x00000001
+#define lpfc_trailer_hpi_WORD trailer
+#define lpfc_trailer_completed_SHIFT 28
+#define lpfc_trailer_completed_MASK 0x00000001
+#define lpfc_trailer_completed_WORD trailer
+#define lpfc_trailer_consumed_SHIFT 27
+#define lpfc_trailer_consumed_MASK 0x00000001
+#define lpfc_trailer_consumed_WORD trailer
+#define lpfc_trailer_type_SHIFT 16
+#define lpfc_trailer_type_MASK 0x000000FF
+#define lpfc_trailer_type_WORD trailer
+#define lpfc_trailer_code_SHIFT 8
+#define lpfc_trailer_code_MASK 0x000000FF
+#define lpfc_trailer_code_WORD trailer
+#define LPFC_TRAILER_CODE_LINK 0x1
+#define LPFC_TRAILER_CODE_FCOE 0x2
+#define LPFC_TRAILER_CODE_DCBX 0x3
+};
+
+struct lpfc_acqe_link {
+ uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT 24
+#define lpfc_acqe_link_speed_MASK 0x000000FF
+#define lpfc_acqe_link_speed_WORD word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO 0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS 0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS 0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS 0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS 0x4
+#define lpfc_acqe_link_duplex_SHIFT 16
+#define lpfc_acqe_link_duplex_MASK 0x000000FF
+#define lpfc_acqe_link_duplex_WORD word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE 0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF 0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL 0x2
+#define lpfc_acqe_link_status_SHIFT 8
+#define lpfc_acqe_link_status_MASK 0x000000FF
+#define lpfc_acqe_link_status_WORD word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN 0x0
+#define LPFC_ASYNC_LINK_STATUS_UP 0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN 0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP 0x3
+#define lpfc_acqe_link_physical_SHIFT 0
+#define lpfc_acqe_link_physical_MASK 0x000000FF
+#define lpfc_acqe_link_physical_WORD word0
+#define LPFC_ASYNC_LINK_PORT_A 0x0
+#define LPFC_ASYNC_LINK_PORT_B 0x1
+ uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT 0
+#define lpfc_acqe_link_fault_MASK 0x000000FF
+#define lpfc_acqe_link_fault_WORD word1
+#define LPFC_ASYNC_LINK_FAULT_NONE 0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL 0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE 0x2
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+ uint32_t fcf_index;
+ uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT 0
+#define lpfc_acqe_fcoe_fcf_count_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD word1
+#define lpfc_acqe_fcoe_event_type_SHIFT 16
+#define lpfc_acqe_fcoe_event_type_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF 0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+ uint32_t tlv_ttl;
+ uint32_t reserved;
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+ struct lpfc_mqe mqe;
+ struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+ uint32_t word6;
+#define wqe_xri_SHIFT 0
+#define wqe_xri_MASK 0x0000FFFF
+#define wqe_xri_WORD word6
+#define wqe_ctxt_tag_SHIFT 16
+#define wqe_ctxt_tag_MASK 0x0000FFFF
+#define wqe_ctxt_tag_WORD word6
+ uint32_t word7;
+#define wqe_ct_SHIFT 2
+#define wqe_ct_MASK 0x00000003
+#define wqe_ct_WORD word7
+#define wqe_status_SHIFT 4
+#define wqe_status_MASK 0x0000000f
+#define wqe_status_WORD word7
+#define wqe_cmnd_SHIFT 8
+#define wqe_cmnd_MASK 0x000000ff
+#define wqe_cmnd_WORD word7
+#define wqe_class_SHIFT 16
+#define wqe_class_MASK 0x00000007
+#define wqe_class_WORD word7
+#define wqe_pu_SHIFT 20
+#define wqe_pu_MASK 0x00000003
+#define wqe_pu_WORD word7
+#define wqe_erp_SHIFT 22
+#define wqe_erp_MASK 0x00000001
+#define wqe_erp_WORD word7
+#define wqe_lnk_SHIFT 23
+#define wqe_lnk_MASK 0x00000001
+#define wqe_lnk_WORD word7
+#define wqe_tmo_SHIFT 24
+#define wqe_tmo_MASK 0x000000ff
+#define wqe_tmo_WORD word7
+ uint32_t abort_tag; /* word 8 in WQE */
+ uint32_t word9;
+#define wqe_reqtag_SHIFT 0
+#define wqe_reqtag_MASK 0x0000FFFF
+#define wqe_reqtag_WORD word9
+#define wqe_rcvoxid_SHIFT 16
+#define wqe_rcvoxid_MASK 0x0000FFFF
+#define wqe_rcvoxid_WORD word9
+ uint32_t word10;
+#define wqe_pri_SHIFT 16
+#define wqe_pri_MASK 0x00000007
+#define wqe_pri_WORD word10
+#define wqe_pv_SHIFT 19
+#define wqe_pv_MASK 0x00000001
+#define wqe_pv_WORD word10
+#define wqe_xc_SHIFT 21
+#define wqe_xc_MASK 0x00000001
+#define wqe_xc_WORD word10
+#define wqe_ccpe_SHIFT 23
+#define wqe_ccpe_MASK 0x00000001
+#define wqe_ccpe_WORD word10
+#define wqe_ccp_SHIFT 24
+#define wqe_ccp_MASK 0x000000ff
+#define wqe_ccp_WORD word10
+ uint32_t word11;
+#define wqe_cmd_type_SHIFT 0
+#define wqe_cmd_type_MASK 0x0000000f
+#define wqe_cmd_type_WORD word11
+#define wqe_wqec_SHIFT 7
+#define wqe_wqec_MASK 0x00000001
+#define wqe_wqec_WORD word11
+#define wqe_cqid_SHIFT 16
+#define wqe_cqid_MASK 0x000003ff
+#define wqe_cqid_WORD word11
+};
+
+struct wqe_did {
+ uint32_t word5;
+#define wqe_els_did_SHIFT 0
+#define wqe_els_did_MASK 0x00FFFFFF
+#define wqe_els_did_WORD word5
+#define wqe_xmit_bls_ar_SHIFT 30
+#define wqe_xmit_bls_ar_MASK 0x00000001
+#define wqe_xmit_bls_ar_WORD word5
+#define wqe_xmit_bls_xo_SHIFT 31
+#define wqe_xmit_bls_xo_MASK 0x00000001
+#define wqe_xmit_bls_xo_WORD word5
+};
+
+struct els_request64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t word4;
+#define els_req64_sid_SHIFT 0
+#define els_req64_sid_MASK 0x00FFFFFF
+#define els_req64_sid_WORD word4
+#define els_req64_sp_SHIFT 24
+#define els_req64_sp_MASK 0x00000001
+#define els_req64_sp_WORD word4
+#define els_req64_vf_SHIFT 25
+#define els_req64_vf_MASK 0x00000001
+#define els_req64_vf_WORD word4
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t word12;
+#define els_req64_vfid_SHIFT 1
+#define els_req64_vfid_MASK 0x00000FFF
+#define els_req64_vfid_WORD word12
+#define els_req64_pri_SHIFT 13
+#define els_req64_pri_MASK 0x00000007
+#define els_req64_pri_WORD word12
+ uint32_t word13;
+#define els_req64_hopcnt_SHIFT 24
+#define els_req64_hopcnt_MASK 0x000000ff
+#define els_req64_hopcnt_WORD word13
+ uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t rsvd3;
+ uint32_t rsvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+ uint32_t payload0;
+ uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT 0
+#define xmit_bls_rsp64_rxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD word1
+#define xmit_bls_rsp64_oxid_SHIFT 16
+#define xmit_bls_rsp64_oxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD word1
+ uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT 0
+#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT 16
+#define xmit_bls_rsp64_seqcnthi_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD word2
+ uint32_t rsrvd3;
+ uint32_t rsrvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+ uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK 0x000000001
+#define wqe_si_WORD word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK 0x000000001
+#define wqe_la_WORD word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK 0x000000001
+#define wqe_ls_WORD word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK 0x0000000ff
+#define wqe_dfctl_WORD word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK 0x0000000ff
+#define wqe_type_WORD word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK 0x0000000ff
+#define wqe_rctl_WORD word5
+};
+
+struct xmit_seq64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_offset;
+ uint32_t relative_offset;
+ struct wqe_rctl_dfctl wge_ctl;
+ struct wqe_common wqe_com; /* words 6-11 */
+ /* Note: word10 different REVISIT */
+ uint32_t xmit_len;
+ uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_len;
+ uint32_t rsvd4;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t command_len;
+ uint32_t payload_len;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+ uint32_t rsrvd[5]; /* words 0-4 */
+ struct wqe_did wqe_dest; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+ uint32_t rsrvd[3];
+ uint32_t word3;
+#define abort_cmd_ia_SHIFT 0
+#define abort_cmd_ia_MASK 0x000000001
+#define abort_cmd_ia_WORD word3
+#define abort_cmd_criteria_SHIFT 8
+#define abort_cmd_criteria_MASK 0x0000000ff
+#define abort_cmd_criteria_WORD word3
+ uint32_t rsrvd4;
+ uint32_t rsrvd5;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t total_xfer_len;
+ uint32_t initial_xfer_len;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len; /* word 3 */
+ uint32_t total_xfer_len; /* word 4 */
+ uint32_t rsrvd5; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+ struct ulp_bde64 bde; /* words 0-2 */
+ uint32_t rsrvd[3]; /* words 3-5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+ uint32_t words[16];
+ struct lpfc_wqe_generic generic;
+ struct fcp_icmnd64_wqe fcp_icmd;
+ struct fcp_iread64_wqe fcp_iread;
+ struct fcp_iwrite64_wqe fcp_iwrite;
+ struct abort_cmd_wqe abort_cmd;
+ struct create_xri_wqe create_xri;
+ struct xmit_bcast64_wqe xmit_bcast64;
+ struct xmit_seq64_wqe xmit_sequence;
+ struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+ struct xmit_els_rsp64_wqe xmit_els_rsp;
+ struct els_request64_wqe els_req;
+ struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3f06ce2..e9e4a1d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -34,8 +34,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -51,9 +53,23 @@ char *_dump_buf_dif;
unsigned long _dump_buf_dif_order;
spinlock_t _dump_buf_lock;
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -646,6 +662,77 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba)
return 0;
}
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb, *psb_next;
+ LIST_HEAD(aborts);
+ int ret;
+ unsigned long iflag = 0;
+ ret = lpfc_hba_down_post_s3(phba);
+ if (ret)
+ return ret;
+ /* At this point in time the HBA is either reset or DOA. Either
+ * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+ * on the lpfc_sgl_list so that it can either be freed if the
+ * driver is unloading or reposted if the driver is restarting
+ * the port.
+ */
+ spin_lock_irq(&phba->hbalock); /* required for lpfc_sgl_list and */
+ /* scsl_buf_list */
+ /* abts_sgl_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+ /* abts_scsi_buf_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+ &aborts);
+ spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+ psb->pCmd = NULL;
+ psb->status = IOSTAT_SUCCESS;
+ }
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+ return (*phba->lpfc_hba_down_post)(phba);
+}
/**
* lpfc_hb_timeout - The HBA-timer timeout handler
@@ -853,6 +940,25 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli4_brdreset(phba);
+ lpfc_hba_down_post(phba);
+ lpfc_sli4_post_status_check(phba);
+ lpfc_unblock_mgmt_io(phba);
+ phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
* lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
* @phba: pointer to lpfc hba data structure.
*
@@ -1057,6 +1163,65 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
}
/**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ uint32_t event_data;
+ struct Scsi_Host *shost;
+
+ /* If the pci channel is offline, ignore possible errors, since
+ * we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev))
+ return;
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
+
+ /* Send an internal error event to mgmt application */
+ lpfc_board_errevt_to_mgmt(phba);
+
+ /* For now, the actual action for SLI4 device handling is not
+ * specified yet, just treated it as adaptor hardware failure
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+ phba->work_status[0], phba->work_status[1]);
+
+ event_data = FC_REG_DUMP_EVENT;
+ shost = lpfc_shost_from_vport(vport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(event_data), (char *) &event_data,
+ SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+ lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+ (*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
* lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
@@ -1312,6 +1477,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
uint16_t dev_id = phba->pcidev->device;
int max_speed;
int GE = 0;
+ int oneConnect = 0; /* default is not a oneConnect */
struct {
char * name;
int max_speed;
@@ -1457,6 +1623,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
case PCI_DEVICE_ID_PROTEUS_S:
m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
break;
+ case PCI_DEVICE_ID_TIGERSHARK:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ break;
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+ break;
default:
m = (typeof(m)){ NULL };
break;
@@ -1464,13 +1638,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
- if (descp && descp[0] == '\0')
- snprintf(descp, 255,
- "Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+ /* oneConnect hba requires special processing, they are all initiators
+ * and we put the port number on the end
+ */
+ if (descp && descp[0] == '\0') {
+ if (oneConnect)
+ snprintf(descp, 255,
+ "Emulex OneConnect %s, FCoE Initiator, Port %s",
+ m.name,
+ phba->Port);
+ else
+ snprintf(descp, 255,
+ "Emulex %s %d%s %s %s",
+ m.name, m.max_speed,
+ (GE) ? "GE" : "Gb",
+ m.bus,
+ (GE) ? "FCoE Adapter" :
+ "Fibre Channel Adapter");
+ }
}
/**
@@ -1911,14 +2096,21 @@ lpfc_online(struct lpfc_hba *phba)
return 1;
}
- if (lpfc_sli_hba_setup(phba)) { /* Initialize the HBA */
- lpfc_unblock_mgmt_io(phba);
- return 1;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
+ } else {
+ if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
}
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
@@ -1980,11 +2172,12 @@ lpfc_offline_prep(struct lpfc_hba * phba)
/* Issue an unreg_login to all nodes on all vports */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
if (vports[i]->load_flag & FC_UNLOADING)
continue;
+ vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
@@ -2029,11 +2222,11 @@ lpfc_offline(struct lpfc_hba *phba)
if (phba->pport->fc_flag & FC_OFFLINE_MODE)
return;
- /* stop all timers associated with this hba */
- lpfc_stop_phba_timers(phba);
+ /* stop port and all timers associated with this hba */
+ lpfc_stop_port(phba);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_stop_vport_timers(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2046,7 +2239,7 @@ lpfc_offline(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->work_port_events = 0;
@@ -2139,6 +2332,10 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
shost->max_lun = vport->cfg_max_luns;
shost->this_id = -1;
shost->max_cmd_len = 16;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+ shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+ }
/*
* Set initial can_queue value since 0 is no longer supported and
@@ -2156,6 +2353,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
/* Initialize all internally managed lists. */
INIT_LIST_HEAD(&vport->fc_nodes);
+ INIT_LIST_HEAD(&vport->rcv_buffer_list);
spin_lock_init(&vport->work_port_lock);
init_timer(&vport->fc_disctmo);
@@ -2347,192 +2545,501 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
}
/**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
- * later when device is unloading, the driver should always call free_irq()
- * on all MSI-X vectors it has done request_irq() on before calling
- * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
- * will be left with MSI-X enabled and leaks its vectors.
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+
+ /* Reset some HBA SLI setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
*
- * Return codes
- * 0 - sucessful
- * other values - error
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
**/
-static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
{
- int rc, i;
- LPFC_MBOXQ_t *pmb;
+ /* Reset some HBA SLI4 setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+ phba->sli4_hba.intr_enable = 0;
+ /* Hard clear it for now, shall have more graceful way to wait later */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
- /* Set up MSI-X multi-message vectors */
- for (i = 0; i < LPFC_MSIX_VECTORS; i++)
- phba->msix_entries[i].entry = i;
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+ phba->lpfc_stop_port(phba);
+}
- /* Configure MSI-X capability structure */
- rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
- ARRAY_SIZE(phba->msix_entries));
- if (rc) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0420 PCI enable MSI-X failed (%d)\n", rc);
- goto msi_fail_out;
- } else
- for (i = 0; i < LPFC_MSIX_VECTORS; i++)
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0477 MSI-X entry[%d]: vector=x%x "
- "message=%d\n", i,
- phba->msix_entries[i].vector,
- phba->msix_entries[i].entry);
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port. This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+ uint32_t mbox_tmo, req_len;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2020 Failed to allocate mbox for ADD_FCF cmd\n");
+ return;
+ }
+
+ req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+ sizeof(struct lpfc_sli4_cfg_mhdr);
+ rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+ req_len, LPFC_SLI4_MBX_EMBED);
/*
- * Assign MSI-X vectors to interrupt handlers
+ * In phase 1, there is a single FCF index, 0. In phase2, the driver
+ * supports multiple FCF indices.
*/
+ del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+ bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+ bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+ phba->fcf.fcf_indx);
- /* vector-0 is associated to slow-path handler */
- rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
- IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
- if (rc) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0421 MSI-X slow-path request_irq failed "
- "(%d)\n", rc);
- goto msi_fail_out;
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2516 DEL FCF of default FCF Index failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
}
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+}
- /* vector-1 is associated to fast-path handler */
- rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
- IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint16_t latt_fault;
- if (rc) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0429 MSI-X fast-path request_irq failed "
- "(%d)\n", rc);
- goto irq_fail_out;
+ switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+ case LPFC_ASYNC_LINK_FAULT_NONE:
+ case LPFC_ASYNC_LINK_FAULT_LOCAL:
+ case LPFC_ASYNC_LINK_FAULT_REMOTE:
+ latt_fault = 0;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0398 Invalid link fault code: x%x\n",
+ bf_get(lpfc_acqe_link_fault, acqe_link));
+ latt_fault = MBXERR_ERROR;
+ break;
}
+ return latt_fault;
+}
- /*
- * Configure HBA MSI-X attention conditions to messages
- */
- pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t att_type;
- if (!pmb) {
- rc = -ENOMEM;
+ switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+ case LPFC_ASYNC_LINK_STATUS_DOWN:
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+ att_type = AT_LINK_DOWN;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_UP:
+ /* Ignore physical link up events - wait for logical link up */
+ att_type = AT_RESERVED;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+ att_type = AT_LINK_UP;
+ break;
+ default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0474 Unable to allocate memory for issuing "
- "MBOX_CONFIG_MSI command\n");
- goto mem_fail_out;
+ "0399 Invalid link attention type: x%x\n",
+ bf_get(lpfc_acqe_link_status, acqe_link));
+ att_type = AT_RESERVED;
+ break;
}
- rc = lpfc_config_msi(phba, pmb);
- if (rc)
- goto mbx_fail_out;
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
- "0351 Config MSI mailbox command failed, "
- "mbxCmd x%x, mbxStatus x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus);
- goto mbx_fail_out;
+ return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t link_speed;
+
+ switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+ case LPFC_ASYNC_LINK_SPEED_ZERO:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_100MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_1GBPS:
+ link_speed = LA_1GHZ_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
+ link_speed = LA_10GHZ_LINK;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0483 Invalid link-attention link speed: x%x\n",
+ bf_get(lpfc_acqe_link_speed, acqe_link));
+ link_speed = LA_UNKNW_LINK;
+ break;
}
+ return link_speed;
+}
- /* Free memory allocated for mailbox command */
- mempool_free(pmb, phba->mbox_mem_pool);
- return rc;
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ struct lpfc_dmabuf *mp;
+ LPFC_MBOXQ_t *pmb;
+ MAILBOX_t *mb;
+ READ_LA_VAR *la;
+ uint8_t att_type;
-mbx_fail_out:
- /* Free memory allocated for mailbox command */
- mempool_free(pmb, phba->mbox_mem_pool);
+ att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+ if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+ return;
+ pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0395 The mboxq allocation failed\n");
+ return;
+ }
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!mp) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0396 The lpfc_dmabuf allocation failed\n");
+ goto out_free_pmb;
+ }
+ mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+ if (!mp->virt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0397 The mbuf allocation failed\n");
+ goto out_free_dmabuf;
+ }
-mem_fail_out:
- /* free the irq already requested */
- free_irq(phba->msix_entries[1].vector, phba);
+ /* Cleanup any outstanding ELS commands */
+ lpfc_els_flush_all_cmd(phba);
-irq_fail_out:
- /* free the irq already requested */
- free_irq(phba->msix_entries[0].vector, phba);
+ /* Block ELS IOCBs until we have done process link event */
+ phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
-msi_fail_out:
- /* Unconfigure MSI-X capability structure */
- pci_disable_msix(phba->pcidev);
- return rc;
+ /* Update link event statistics */
+ phba->sli.slistat.link_event++;
+
+ /* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+ lpfc_read_la(phba, pmb, mp);
+ pmb->vport = phba->pport;
+
+ /* Parse and translate status field */
+ mb = &pmb->u.mb;
+ mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+ /* Parse and translate link attention fields */
+ la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+ la->eventTag = acqe_link->event_tag;
+ la->attType = att_type;
+ la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+ /* Fake the the following irrelvant fields */
+ la->topology = TOPOLOGY_PT_PT;
+ la->granted_AL_PA = 0;
+ la->il = 0;
+ la->pb = 0;
+ la->fa = 0;
+ la->mm = 0;
+
+ /* Keep the link status for extra SLI4 state machine reference */
+ phba->sli4_hba.link_state.speed =
+ bf_get(lpfc_acqe_link_speed, acqe_link);
+ phba->sli4_hba.link_state.duplex =
+ bf_get(lpfc_acqe_link_duplex, acqe_link);
+ phba->sli4_hba.link_state.status =
+ bf_get(lpfc_acqe_link_status, acqe_link);
+ phba->sli4_hba.link_state.physical =
+ bf_get(lpfc_acqe_link_physical, acqe_link);
+ phba->sli4_hba.link_state.fault =
+ bf_get(lpfc_acqe_link_fault, acqe_link);
+
+ /* Invoke the lpfc_handle_latt mailbox command callback function */
+ lpfc_mbx_cmpl_read_la(phba, pmb);
+
+ return;
+
+out_free_dmabuf:
+ kfree(mp);
+out_free_pmb:
+ mempool_free(pmb, phba->mbox_mem_pool);
}
/**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
* @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
*
- * This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * This routine is to handle the SLI4 asynchronous fcoe event.
**/
static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_fcoe *acqe_fcoe)
{
- int i;
+ uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+ int rc;
- /* Free up MSI-X multi-message vectors */
- for (i = 0; i < LPFC_MSIX_VECTORS; i++)
- free_irq(phba->msix_entries[i].vector, phba);
- /* Disable MSI-X */
- pci_disable_msix(phba->pcidev);
+ switch (event_type) {
+ case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2546 New FCF found index 0x%x tag 0x%x \n",
+ acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /*
+ * If the current FCF is in discovered state,
+ * do nothing.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the FCF table and re-discover SAN. */
+ rc = lpfc_sli4_read_fcf_record(phba,
+ LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2547 Read FCF record failed 0x%x\n",
+ rc);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2548 FCF Table full count 0x%x tag 0x%x \n",
+ bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+ acqe_fcoe->event_tag);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2549 FCF disconnected fron network index 0x%x"
+ " tag 0x%x \n", acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /* If the event is not for currently used fcf do nothing */
+ if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ break;
+ /*
+ * Currently, driver support only one FCF - so treat this as
+ * a link down.
+ */
+ lpfc_linkdown(phba);
+ /* Unregister FCF if no devices connected to it */
+ lpfc_unregister_unused_fcf(phba);
+ break;
+
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0288 Unknown FCoE event type 0x%x event tag "
+ "0x%x\n", event_type, acqe_fcoe->event_tag);
+ break;
+ }
}
/**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
* @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
*
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
- *
- * Return codes
- * 0 - sucessful
- * other values - error
- */
-static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_dcbx *acqe_dcbx)
{
- int rc;
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0290 The SLI4 DCBX asynchronous event is not "
+ "handled yet\n");
+}
- rc = pci_enable_msi(phba->pcidev);
- if (!rc)
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0462 PCI enable MSI mode success.\n");
- else {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0471 PCI enable MSI mode failed (%d)\n", rc);
- return rc;
- }
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
- rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
- IRQF_SHARED, LPFC_DRIVER_NAME, phba);
- if (rc) {
- pci_disable_msi(phba->pcidev);
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0478 MSI request_irq failed (%d)\n", rc);
+ /* First, declare the async event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ASYNC_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the async events */
+ while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Process the asynchronous event */
+ switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+ case LPFC_TRAILER_CODE_LINK:
+ lpfc_sli4_async_link_evt(phba,
+ &cq_event->cqe.acqe_link);
+ break;
+ case LPFC_TRAILER_CODE_FCOE:
+ lpfc_sli4_async_fcoe_evt(phba,
+ &cq_event->cqe.acqe_fcoe);
+ break;
+ case LPFC_TRAILER_CODE_DCBX:
+ lpfc_sli4_async_dcbx_evt(phba,
+ &cq_event->cqe.acqe_dcbx);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "1804 Invalid asynchrous event code: "
+ "x%x\n", bf_get(lpfc_trailer_code,
+ &cq_event->cqe.mcqe_cmpl));
+ break;
+ }
+ /* Free the completion event processed to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
}
- return rc;
}
/**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
* @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
*
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
- */
-
-static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
- free_irq(phba->pcidev->irq, phba);
- pci_disable_msi(phba->pcidev);
- return;
+ int rc;
+
+ /* Set up lpfc PCI-device group */
+ phba->pci_dev_grp = dev_grp;
+
+ /* The LPFC_PCI_DEV_OC uses SLI4 */
+ if (dev_grp == LPFC_PCI_DEV_OC)
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /* Set up device INIT API function jump table */
+ rc = lpfc_init_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SCSI API function jump table */
+ rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SLI API function jump table */
+ rc = lpfc_sli_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up MBOX API function jump table */
+ rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+
+ return 0;
}
/**
@@ -2764,6 +3271,292 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+ int rc;
+ int i, hbq_count;
+
+ /* Before proceed, wait for POST done and device ready */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (rc)
+ return -ENODEV;
+
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+ /*
+ * We need to do a READ_CONFIG mailbox command here before
+ * calling lpfc_get_cfgparam. For VFs this will report the
+ * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+ * All of the resources allocated
+ * for this Port are tied to these values.
+ */
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after the read_config mbox */
+ phba->max_vports = 0;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ * To insure that the scsi sgl does not cross a 4k page boundary only
+ * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+ * Table of sgl sizes and seg_cnt:
+ * sgl size, sg_seg_cnt total seg
+ * 1k 50 52
+ * 2k 114 116
+ * 4k 242 244
+ * 8k 498 500
+ * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+ * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+ * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+ * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+ */
+ if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+ phba->cfg_sg_seg_cnt = 50;
+ else if (phba->cfg_sg_seg_cnt <= 114)
+ phba->cfg_sg_seg_cnt = 114;
+ else if (phba->cfg_sg_seg_cnt <= 242)
+ phba->cfg_sg_seg_cnt = 242;
+ else
+ phba->cfg_sg_seg_cnt = 498;
+
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+ + sizeof(struct fcp_rsp);
+ phba->cfg_sg_dma_buf_size +=
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Initialize buffer queue management fields */
+ hbq_count = lpfc_sli_hbq_count();
+ for (i = 0; i < hbq_count; ++i)
+ INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+ INIT_LIST_HEAD(&phba->rb_pend_list);
+ phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+ */
+ /* Initialize the Abort scsi buffer list used by driver */
+ spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ /* This abort list used by worker thread */
+ spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+ /*
+ * Initialize dirver internal slow-path work queues
+ */
+
+ /* Driver internel slow-path CQ Event pool */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+ /* Response IOCB work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Asynchronous event CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+ /* Fast-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Slow-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Receive queue CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+ /* Initialize the driver internal SLI layer lists. */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+ if (rc)
+ return -ENOMEM;
+
+ /* Create the bootstrap mailbox command */
+ rc = lpfc_create_bootstrap_mbox(phba);
+ if (unlikely(rc))
+ goto out_free_mem;
+
+ /* Set up the host's endian order with the device. */
+ rc = lpfc_setup_endian_order(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Set up the hba's configuration parameters. */
+ rc = lpfc_sli4_read_config(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Perform a function reset */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Create all the SLI4 queues */
+ rc = lpfc_sli4_queue_create(phba);
+ if (rc)
+ goto out_free_bsmbx;
+
+ /* Create driver internal CQE event pool */
+ rc = lpfc_sli4_cq_event_pool_create(phba);
+ if (rc)
+ goto out_destroy_queue;
+
+ /* Initialize and populate the iocb list per host */
+ rc = lpfc_init_sgl_list(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1400 Failed to initialize sgl list.\n");
+ goto out_destroy_cq_event_pool;
+ }
+ rc = lpfc_init_active_sgl_array(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1430 Failed to initialize sgl list.\n");
+ goto out_free_sgl_list;
+ }
+
+ rc = lpfc_sli4_init_rpi_hdrs(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1432 Failed to initialize rpi headers.\n");
+ goto out_free_active_sgl;
+ }
+
+ phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_eq_hdl) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2572 Failed allocate memory for fast-path "
+ "per-EQ handle array\n");
+ goto out_remove_rpi_hdrs;
+ }
+
+ phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+ phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+ if (!phba->sli4_hba.msix_entries) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2573 Failed allocate memory for msi-x "
+ "interrupt vector entries\n");
+ goto out_free_fcp_eq_hdl;
+ }
+
+ return rc;
+
+out_free_fcp_eq_hdl:
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+ lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+ lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+ lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+ lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+ lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+ lpfc_mem_free(phba);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+ struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+ /* Free the default FCR table */
+ lpfc_sli_remove_dflt_fcf(phba);
+
+ /* Free memory allocated for msi-x interrupt vector entries */
+ kfree(phba->sli4_hba.msix_entries);
+
+ /* Free memory allocated for fast-path work queue handles */
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+
+ /* Free the allocated rpi headers. */
+ lpfc_sli4_remove_rpi_hdrs(phba);
+
+ /* Free the ELS sgl list */
+ lpfc_free_active_sgl(phba);
+ lpfc_free_sgl_list(phba);
+
+ /* Free the SCSI sgl management array */
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+ /* Free the SLI4 queues */
+ lpfc_sli4_queue_destroy(phba);
+
+ /* Free the completion queue EQ event pool */
+ lpfc_sli4_cq_event_release_all(phba);
+ lpfc_sli4_cq_event_pool_destroy(phba);
+
+ /* Reset SLI4 HBA FCoE function */
+ lpfc_pci_function_reset(phba);
+
+ /* Free the bsmbx region. */
+ lpfc_destroy_bootstrap_mbox(phba);
+
+ /* Free the SLI Layer memory with SLI4 HBAs */
+ lpfc_mem_free_all(phba);
+
+ /* Free the current connect table */
+ list_for_each_entry_safe(conn_entry, next_conn_entry,
+ &phba->fcf_conn_rec_list, list)
+ kfree(conn_entry);
+
+ return;
+}
+
+/**
* lpfc_init_api_table_setup - Set up init api fucntion jump table
* @phba: The hba struct for which this call is being executed.
* @dev_grp: The HBA PCI-Device group number.
@@ -2782,6 +3575,11 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
phba->lpfc_stop_port = lpfc_stop_port_s3;
break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+ phba->lpfc_stop_port = lpfc_stop_port_s4;
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1431 Invalid HBA PCI-device group: 0x%x\n",
@@ -2956,6 +3754,346 @@ out_free_iocbq:
}
/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ LIST_HEAD(sglq_list);
+ int rc = 0;
+
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &sglq_list, list) {
+ list_del(&sglq_entry->list);
+ lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+ kfree(sglq_entry);
+ phba->sli4_hba.total_sglq_bufs--;
+ }
+ rc = lpfc_sli4_remove_all_sgl_pages(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2005 Unable to deregister pages from HBA: %x", rc);
+ }
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+ int size;
+ size = sizeof(struct lpfc_sglq *);
+ size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+ phba->sli4_hba.lpfc_sglq_active_list =
+ kzalloc(size, GFP_KERNEL);
+ if (!phba->sli4_hba.lpfc_sglq_active_list)
+ return -ENOMEM;
+ return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+ kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL;
+ int i;
+ int els_xri_cnt;
+
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2400 lpfc_init_sgl_list els %d.\n",
+ els_xri_cnt);
+ /* Initialize and populate the sglq list per host/VF. */
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+ /* Sanity check on XRI management */
+ if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2562 No room left for SCSI XRI allocation: "
+ "max_xri=%d, els_xri=%d\n",
+ phba->sli4_hba.max_cfg_param.max_xri,
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for the ELS XRI management array */
+ phba->sli4_hba.lpfc_els_sgl_array =
+ kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+ GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_els_sgl_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2401 Failed to allocate memory for ELS "
+ "XRI management array of size %d.\n",
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Keep the SCSI XRI into the XRI management array */
+ phba->sli4_hba.scsi_xri_max =
+ phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+ phba->sli4_hba.scsi_xri_cnt = 0;
+
+ phba->sli4_hba.lpfc_scsi_psb_array =
+ kzalloc((sizeof(struct lpfc_scsi_buf *) *
+ phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2563 Failed to allocate memory for SCSI "
+ "XRI management array of size %d.\n",
+ phba->sli4_hba.scsi_xri_max);
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < els_xri_cnt; i++) {
+ sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+ if (sglq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d sgls of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, els_xri_cnt);
+ goto out_free_mem;
+ }
+
+ sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (sglq_entry->sli4_xritag == NO_XRI) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate XRI.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->buff_type = GEN_BUFF_TYPE;
+ sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+ if (sglq_entry->virt == NULL) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->sgl = sglq_entry->virt;
+ memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+ /* The list order is used by later block SGL registraton */
+ spin_lock_irq(&phba->hbalock);
+ list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+ phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+ phba->sli4_hba.total_sglq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
+ return 0;
+
+out_free_mem:
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+ lpfc_free_sgl_list(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ int longs;
+ uint16_t rpi_count;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * Provision an rpi bitmask range for discovery. The total count
+ * is the difference between max and base + 1.
+ */
+ rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!phba->sli4_hba.rpi_bmask)
+ return -ENOMEM;
+
+ rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+ if (!rpi_hdr) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0391 Error during rpi post operation\n");
+ lpfc_sli4_remove_rpis(phba);
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba. This single region
+ * provides support for up to 64 rpis. The region is used globally
+ * by the device.
+ *
+ * Returns:
+ * A valid rpi hdr on success.
+ * A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+ uint16_t rpi_limit, curr_rpi_range;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ spin_lock_irq(&phba->hbalock);
+ curr_rpi_range = phba->sli4_hba.next_rpi;
+ spin_unlock_irq(&phba->hbalock);
+
+ /*
+ * The port has a limited number of rpis. The increment here
+ * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+ * and to allow the full max_rpi range per port.
+ */
+ if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+ return NULL;
+
+ /*
+ * First allocate the protocol header region for the port. The
+ * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+ */
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return NULL;
+
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ LPFC_HDR_TEMPLATE_SIZE,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ rpi_hdr = NULL;
+ goto err_free_dmabuf;
+ }
+
+ memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+ if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+ rpi_hdr = NULL;
+ goto err_free_coherent;
+ }
+
+ /* Save the rpi header data for cleanup later. */
+ rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+ if (!rpi_hdr)
+ goto err_free_coherent;
+
+ rpi_hdr->dmabuf = dmabuf;
+ rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+ rpi_hdr->page_count = 1;
+ spin_lock_irq(&phba->hbalock);
+ rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+ list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * The next_rpi stores the next module-64 rpi value to post
+ * in any subsequent rpi memory region postings.
+ */
+ phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+ spin_unlock_irq(&phba->hbalock);
+ return rpi_hdr;
+
+ err_free_coherent:
+ dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+ kfree(dmabuf);
+ return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+ struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+ list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+ &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ list_del(&rpi_hdr->list);
+ dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+ rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+ kfree(rpi_hdr->dmabuf);
+ kfree(rpi_hdr);
+ }
+
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
* lpfc_hba_alloc - Allocate driver hba data structure for a device.
* @pdev: pointer to pci device data structure.
*
@@ -3316,6 +4454,1542 @@ lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+ struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+ uint32_t onlnreg0, onlnreg1;
+ int i, port_error = -ENODEV;
+
+ if (!phba->sli4_hba.STAregaddr)
+ return -ENODEV;
+
+ /* With uncoverable error, log the error message and return error */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ onlnreg0, onlnreg1);
+ }
+ return -ENODEV;
+ }
+
+ /* Wait up to 30 seconds for the SLI Port POST done and ready */
+ for (i = 0; i < 3000; i++) {
+ sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+ /* Encounter fatal POST error, break out */
+ if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+ port_error = -ENODEV;
+ break;
+ }
+ if (LPFC_POST_STAGE_ARMFW_READY ==
+ bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+ port_error = 0;
+ break;
+ }
+ msleep(10);
+ }
+
+ if (port_error)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1408 Failure HBA POST Status: sta_reg=0x%x, "
+ "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+ "dl=x%x, pstatus=x%x\n", sta_reg.word0,
+ bf_get(lpfc_hst_state_perr, &sta_reg),
+ bf_get(lpfc_hst_state_sfi, &sta_reg),
+ bf_get(lpfc_hst_state_nip, &sta_reg),
+ bf_get(lpfc_hst_state_ipc, &sta_reg),
+ bf_get(lpfc_hst_state_xrom, &sta_reg),
+ bf_get(lpfc_hst_state_dl, &sta_reg),
+ bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+ /* Log device information */
+ scratchpad.word0 = readl(phba->sli4_hba.SCRATCHPADregaddr);
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+ "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+ bf_get(lpfc_scratchpad_slirev, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+ return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+ phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_LO;
+ phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_HI;
+ phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE0;
+ phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE1;
+ phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+ phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_STATE;
+ phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISR0;
+ phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_IMR0;
+ phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISCR0;
+ return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+ if (vf > LPFC_VIR_FUNC_MAX)
+ return -ENODEV;
+
+ phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+ phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+ phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+ phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+ return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec. This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs. No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ uint32_t bmbx_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address *dma_address;
+ uint32_t pa_addr;
+ uint64_t phys_addr;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * The bootstrap mailbox region is comprised of 2 parts
+ * plus an alignment restriction of 16 bytes.
+ */
+ bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ bmbx_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, bmbx_size);
+
+ /*
+ * Initialize the bootstrap mailbox pointers now so that the register
+ * operations are simple later. The mailbox dma address is required
+ * to be 16-byte aligned. Also align the virtual memory as each
+ * maibox is copied into the bmbx mailbox region before issuing the
+ * command to the port.
+ */
+ phba->sli4_hba.bmbx.dmabuf = dmabuf;
+ phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+ phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+ LPFC_ALIGN_16_BYTE);
+ phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+ LPFC_ALIGN_16_BYTE);
+
+ /*
+ * Set the high and low physical addresses now. The SLI4 alignment
+ * requirement is 16 bytes and the mailbox is posted to the port
+ * as two 30-bit addresses. The other data is a bit marking whether
+ * the 30-bit address is the high or low address.
+ * Upcast bmbx aphys to 64bits so shift instruction compiles
+ * clean on 32 bit machines.
+ */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+ pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+ dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_HI);
+
+ pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+ dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_LO);
+ return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ dma_free_coherent(&phba->pcidev->dev,
+ phba->sli4_hba.bmbx.bmbx_size,
+ phba->sli4_hba.bmbx.dmabuf->virt,
+ phba->sli4_hba.bmbx.dmabuf->phys);
+
+ kfree(phba->sli4_hba.bmbx.dmabuf);
+ memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb;
+ struct lpfc_mbx_read_config *rd_config;
+ uint32_t rc = 0;
+
+ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2011 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ lpfc_read_config(phba, pmb);
+
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2012 Mailbox failed , mbxCmd x%x "
+ "READ_CONFIG, mbxStatus x%x\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe),
+ bf_get(lpfc_mqe_status, &pmb->u.mqe));
+ rc = -EIO;
+ } else {
+ rd_config = &pmb->u.mqe.un.rd_config;
+ phba->sli4_hba.max_cfg_param.max_xri =
+ bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ phba->sli4_hba.max_cfg_param.xri_base =
+ bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vpi =
+ bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vpi_base =
+ bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rpi =
+ bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.rpi_base =
+ bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vfi =
+ bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vfi_base =
+ bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_fcfi =
+ bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.fcfi_base =
+ bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_eq =
+ bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rq =
+ bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_wq =
+ bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_cq =
+ bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+ phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+ phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+ phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+ phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+ phba->max_vports = phba->max_vpi;
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2003 cfg params XRI(B:%d M:%d), "
+ "VPI(B:%d M:%d) "
+ "VFI(B:%d M:%d) "
+ "RPI(B:%d M:%d) "
+ "FCFI(B:%d M:%d)\n",
+ phba->sli4_hba.max_cfg_param.xri_base,
+ phba->sli4_hba.max_cfg_param.max_xri,
+ phba->sli4_hba.max_cfg_param.vpi_base,
+ phba->sli4_hba.max_cfg_param.max_vpi,
+ phba->sli4_hba.max_cfg_param.vfi_base,
+ phba->sli4_hba.max_cfg_param.max_vfi,
+ phba->sli4_hba.max_cfg_param.rpi_base,
+ phba->sli4_hba.max_cfg_param.max_rpi,
+ phba->sli4_hba.max_cfg_param.fcfi_base,
+ phba->sli4_hba.max_cfg_param.max_fcfi);
+ }
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+ /* Reset the DFT_HBA_Q_DEPTH to the max xri */
+ if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+ phba->cfg_hba_queue_depth =
+ phba->sli4_hba.max_cfg_param.max_xri;
+ return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+ HOST_ENDIAN_HIGH_WORD1};
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0492 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+ * words to contain special data values and no other data.
+ */
+ memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+ memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0493 SLI_CONFIG_SPECIAL mailbox failed with "
+ "status x%x\n",
+ rc);
+ rc = -EIO;
+ }
+
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+ struct lpfc_queue *qdesc;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int cfg_fcp_wq_count;
+ int cfg_fcp_eq_count;
+
+ /*
+ * Sanity check for confiugred queue parameters against the run-time
+ * device parameters
+ */
+
+ /* Sanity check on FCP fast-path WQ parameters */
+ cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+ if (cfg_fcp_wq_count >
+ (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+ cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+ LPFC_SP_WQN_DEF;
+ if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2581 Not enough WQs (%d) from "
+ "the pci function for supporting "
+ "FCP WQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2582 Not enough WQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP WQs (%d), the actual FCP WQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+ }
+ /* The actual number of FCP work queues adopted */
+ phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+ /* Sanity check on FCP fast-path EQ parameters */
+ cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+ if (cfg_fcp_eq_count >
+ (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+ cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+ LPFC_SP_EQN_DEF;
+ if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2574 Not enough EQs (%d) from the "
+ "pci function for supporting FCP "
+ "EQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2575 Not enough EQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP EQs (%d), the actual FCP EQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+ }
+ /* It does not make sense to have more EQs than WQs */
+ if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2593 The number of FCP EQs (%d) is more "
+ "than the number of FCP WQs (%d), take "
+ "the number of FCP EQs same as than of "
+ "WQs (%d)\n", cfg_fcp_eq_count,
+ phba->cfg_fcp_wq_count,
+ phba->cfg_fcp_wq_count);
+ cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+ }
+ /* The actual number of FCP event queues adopted */
+ phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+ /* The overall number of event queues used */
+ phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+ /*
+ * Create Event Queues (EQs)
+ */
+
+ /* Get EQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+ phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+ /* Create slow path event queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0496 Failed allocate slow-path EQ\n");
+ goto out_error;
+ }
+ phba->sli4_hba.sp_eq = qdesc;
+
+ /* Create fast-path FCP Event Queue(s) */
+ phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2576 Failed allocate memory for fast-path "
+ "EQ record array\n");
+ goto out_free_sp_eq;
+ }
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0497 Failed allocate fast-path EQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+ }
+
+ /*
+ * Create Complete Queues (CQs)
+ */
+
+ /* Get CQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+ phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+ /* Create slow-path Mailbox Command Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0500 Failed allocate slow-path mailbox CQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.mbx_cq = qdesc;
+
+ /* Create slow-path ELS Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0501 Failed allocate slow-path ELS CQ\n");
+ goto out_free_mbx_cq;
+ }
+ phba->sli4_hba.els_cq = qdesc;
+
+ /* Create slow-path Unsolicited Receive Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0502 Failed allocate slow-path USOL RX CQ\n");
+ goto out_free_els_cq;
+ }
+ phba->sli4_hba.rxq_cq = qdesc;
+
+ /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+ phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2577 Failed allocate memory for fast-path "
+ "CQ record array\n");
+ goto out_free_rxq_cq;
+ }
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0499 Failed allocate fast-path FCP "
+ "CQ (%d)\n", fcp_cqidx);
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+ }
+
+ /* Create Mailbox Command Queue */
+ phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+ phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+ phba->sli4_hba.mq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0505 Failed allocate slow-path MQ\n");
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.mbx_wq = qdesc;
+
+ /*
+ * Create all the Work Queues (WQs)
+ */
+ phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+ phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+ /* Create slow-path ELS Work Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0504 Failed allocate slow-path ELS WQ\n");
+ goto out_free_mbx_wq;
+ }
+ phba->sli4_hba.els_wq = qdesc;
+
+ /* Create fast-path FCP Work Queue(s) */
+ phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_wq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2578 Failed allocate memory for fast-path "
+ "WQ record array\n");
+ goto out_free_els_wq;
+ }
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0503 Failed allocate fast-path FCP "
+ "WQ (%d)\n", fcp_wqidx);
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+ phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+ /* Create Receive Queue for header */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0506 Failed allocate receive HRQ\n");
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.hdr_rq = qdesc;
+
+ /* Create Receive Queue for data */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0507 Failed allocate receive DRQ\n");
+ goto out_free_hdr_rq;
+ }
+ phba->sli4_hba.dat_rq = qdesc;
+
+ return 0;
+
+out_free_hdr_rq:
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+ phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+out_error:
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Release mailbox command work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+
+ /* Release ELS work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+
+ /* Release FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_wq);
+ phba->sli4_hba.fcp_wq = NULL;
+
+ /* Release unsolicited receive queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+ lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+ phba->sli4_hba.dat_rq = NULL;
+
+ /* Release unsolicited receive complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+
+ /* Release ELS complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+
+ /* Release mailbox command complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+
+ /* Release FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_cq);
+ phba->sli4_hba.fcp_cq = NULL;
+
+ /* Release fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+ kfree(phba->sli4_hba.fp_eq);
+ phba->sli4_hba.fp_eq = NULL;
+
+ /* Release slow-path event queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+ int rc = -ENOMEM;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int fcp_cq_index = 0;
+
+ /*
+ * Set up Event Queues (EQs)
+ */
+
+ /* Set up slow-path event queue */
+ if (!phba->sli4_hba.sp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0520 Slow-path EQ not allocated\n");
+ goto out_error;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+ LPFC_SP_DEF_IMAX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0521 Failed setup of slow-path EQ: "
+ "rc = 0x%x\n", rc);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2583 Slow-path EQ setup: queue-id=%d\n",
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path event queue */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0522 Fast-path EQ (%d) not "
+ "allocated\n", fcp_eqidx);
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+ phba->cfg_fcp_imax);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0523 Failed setup of fast-path EQ "
+ "(%d), rc = 0x%x\n", fcp_eqidx, rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2584 Fast-path EQ setup: "
+ "queue[%d]-id=%d\n", fcp_eqidx,
+ phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+ }
+
+ /*
+ * Set up Complete Queues (CQs)
+ */
+
+ /* Set up slow-path MBOX Complete Queue as the first CQ */
+ if (!phba->sli4_hba.mbx_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0528 Mailbox CQ not allocated\n");
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+ LPFC_MCQ, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0529 Failed setup of slow-path mailbox CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.mbx_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path ELS Complete Queue */
+ if (!phba->sli4_hba.els_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0530 ELS CQ not allocated\n");
+ goto out_destroy_mbx_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+ LPFC_WCQ, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0531 Failed setup of slow-path ELS CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.els_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path Unsolicited Receive Complete Queue */
+ if (!phba->sli4_hba.rxq_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0532 USOL RX CQ not allocated\n");
+ goto out_destroy_els_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+ LPFC_RCQ, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0533 Failed setup of slow-path USOL RX CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_els_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.rxq_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path FCP Response Complete Queue */
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0526 Fast-path FCP CQ (%d) not "
+ "allocated\n", fcp_cqidx);
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+ phba->sli4_hba.fp_eq[fcp_cqidx],
+ LPFC_WCQ, LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0527 Failed setup of fast-path FCP "
+ "CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2588 FCP CQ setup: cq[%d]-id=%d, "
+ "parent eq[%d]-id=%d\n",
+ fcp_cqidx,
+ phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+ fcp_cqidx,
+ phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+ }
+
+ /*
+ * Set up all the Work Queues (WQs)
+ */
+
+ /* Set up Mailbox Command Queue */
+ if (!phba->sli4_hba.mbx_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0538 Slow-path MQ not allocated\n");
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+ phba->sli4_hba.mbx_cq, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0539 Failed setup of slow-path MQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.mbx_wq->queue_id,
+ phba->sli4_hba.mbx_cq->queue_id);
+
+ /* Set up slow-path ELS Work Queue */
+ if (!phba->sli4_hba.els_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0536 Slow-path ELS WQ not allocated\n");
+ goto out_destroy_mbx_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+ phba->sli4_hba.els_cq, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0537 Failed setup of slow-path ELS WQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.els_wq->queue_id,
+ phba->sli4_hba.els_cq->queue_id);
+
+ /* Set up fast-path FCP Work Queue */
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0534 Fast-path FCP WQ (%d) not "
+ "allocated\n", fcp_wqidx);
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+ phba->sli4_hba.fcp_cq[fcp_cq_index],
+ LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0535 Failed setup of fast-path FCP "
+ "WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2591 FCP WQ setup: wq[%d]-id=%d, "
+ "parent cq[%d]-id=%d\n",
+ fcp_wqidx,
+ phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+ fcp_cq_index,
+ phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+ /* Round robin FCP Work Queue's Completion Queue assignment */
+ fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0540 Receive Queue not allocated\n");
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ phba->sli4_hba.rxq_cq, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0541 Failed setup of Receive Queue: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+ "parent cq-id=%d\n",
+ phba->sli4_hba.hdr_rq->queue_id,
+ phba->sli4_hba.dat_rq->queue_id,
+ phba->sli4_hba.rxq_cq->queue_id);
+ return 0;
+
+out_destroy_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Unset mailbox command work queue */
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+ /* Unset ELS work queue */
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+ /* Unset unsolicited receive queue */
+ lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+ /* Unset FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+ /* Unset mailbox command complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+ /* Unset ELS complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+ /* Unset unsolicited receive complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+ /* Unset FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+ /* Unset fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+ /* Unset slow-path event queue */
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ * - Mailbox asynchronous events
+ * - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ * 0 - sucessful
+ * -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ int i;
+
+ for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+ cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+ if (!cq_event)
+ goto out_pool_create_fail;
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_cqe_event_pool);
+ }
+ return 0;
+
+out_pool_create_fail:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event, *next_cq_event;
+
+ list_for_each_entry_safe(cq_event, next_cq_event,
+ &phba->sli4_hba.sp_cqe_event_pool, list) {
+ list_del(&cq_event->list);
+ kfree(cq_event);
+ }
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event = NULL;
+
+ list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+ struct lpfc_cq_event, list);
+ return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cq_event = __lpfc_sli4_cq_event_alloc(phba);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ unsigned long iflags;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_sli4_cq_event_release(phba, cq_event);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+ LIST_HEAD(cqelist);
+ struct lpfc_cq_event *cqe;
+ unsigned long iflags;
+
+ /* Retrieve all the pending WCQEs from pending WCQE lists */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Pending FCP XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending ELS XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending asynnc events */
+ list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+ &cqelist);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ while (!list_empty(&cqelist)) {
+ list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+ lpfc_sli4_cq_event_release(phba, cqe);
+ }
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0494 Unable to allocate memory for issuing "
+ "SLI_FUNCTION_RESET mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+ LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0495 SLI_FUNCTION_RESET mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int length, cmdsent;
+ uint32_t mbox_tmo;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (cnt == 0) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2518 Requested to send 0 NOP mailbox cmd\n");
+ return cnt;
+ }
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2519 Unable to allocate memory for issuing "
+ "NOP mailbox command\n");
+ return 0;
+ }
+
+ /* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+ length = (sizeof(struct lpfc_mbx_nop) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ if (rc == MBX_TIMEOUT)
+ break;
+ /* Check return status */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2520 NOP mailbox command failed "
+ "status x%x add_status x%x mbx "
+ "status x%x\n", shdr_status,
+ shdr_add_status, rc);
+ break;
+ }
+ }
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+
+ return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+ LPFC_MBOXQ_t *mbox;
+ uint32_t mbox_tmo;
+ int rc;
+ unsigned long flags;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+ if (!mbox)
+ return;
+
+ lpfc_unreg_fcfi(mbox, fcfi);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2517 Unregister FCFI command failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mbox->u.mqe));
+ else {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ /* Mark the FCFI is no longer registered */
+ phba->fcf.fcf_flag &=
+ ~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ }
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar1map_len, bar2map_len;
+ int error = -ENODEV;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
+
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+ * number of bytes required by each mapping. They are actually
+ * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+ */
+ phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+ bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+ phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+ bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+ phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+ bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+ /* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+ phba->sli4_hba.conf_regs_memmap_p =
+ ioremap(phba->pci_bar0_map, bar0map_len);
+ if (!phba->sli4_hba.conf_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 PCI config registers.\n");
+ goto out;
+ }
+
+ /* Map SLI4 HBA Control Register base to a kernel virtual address. */
+ phba->sli4_hba.ctrl_regs_memmap_p =
+ ioremap(phba->pci_bar1_map, bar1map_len);
+ if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA control registers.\n");
+ goto out_iounmap_conf;
+ }
+
+ /* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+ phba->sli4_hba.drbl_regs_memmap_p =
+ ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->sli4_hba.drbl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA doorbell registers.\n");
+ goto out_iounmap_ctrl;
+ }
+
+ /* Set up BAR0 PCI config space register memory map */
+ lpfc_sli4_bar0_register_memmap(phba);
+
+ /* Set up BAR1 register memory map */
+ lpfc_sli4_bar1_register_memmap(phba);
+
+ /* Set up BAR2 register memory map */
+ error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+ if (error)
+ goto out_iounmap_all;
+
+ return 0;
+
+out_iounmap_all:
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+
+ /* Unmap I/O memory space */
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+ return;
+}
+
+/**
* lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
* @phba: pointer to lpfc hba data structure.
*
@@ -3597,6 +6271,276 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
+{
+ int rc, index;
+
+ /* Set up MSI-X multi-message vectors */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+ phba->sli4_hba.msix_entries[index].entry = index;
+
+ /* Configure MSI-X capability structure */
+ rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+ phba->sli4_hba.cfg_eqn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0484 PCI enable MSI-X failed (%d)\n", rc);
+ goto msi_fail_out;
+ }
+ /* Log MSI-X vector assignment */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0489 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", index,
+ phba->sli4_hba.msix_entries[index].vector,
+ phba->sli4_hba.msix_entries[index].entry);
+ /*
+ * Assign MSI-X vectors to interrupt handlers
+ */
+
+ /* The first vector must associated to slow-path handler for MQ */
+ rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+ &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0485 MSI-X slow-path request_irq failed "
+ "(%d)\n", rc);
+ goto msi_fail_out;
+ }
+
+ /* The rest of the vector(s) are associated to fast-path handler(s) */
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+ phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+ rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+ &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0486 MSI-X fast-path (%d) "
+ "request_irq failed (%d)\n", index, rc);
+ goto cfg_fail_out;
+ }
+ }
+
+ return rc;
+
+cfg_fail_out:
+ /* free the irq already requested */
+ for (--index; index >= 1; index--)
+ free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+ /* free the irq already requested */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+ /* Unconfigure MSI-X capability structure */
+ pci_disable_msix(phba->pcidev);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
+{
+ int index;
+
+ /* Free up MSI-X multi-message vectors */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+ free_irq(phba->sli4_hba.msix_entries[index].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ /* Disable MSI-X */
+ pci_disable_msix(phba->pcidev);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+ int rc, index;
+
+ rc = pci_enable_msi(phba->pcidev);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0487 PCI enable MSI mode success.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0488 PCI enable MSI mode failed (%d)\n", rc);
+ return rc;
+ }
+
+ rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (rc) {
+ pci_disable_msi(phba->pcidev);
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0490 MSI request_irq failed (%d)\n", rc);
+ }
+
+ for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msi(phba->pcidev);
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static uint32_t
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+ uint32_t intr_mode = LPFC_INTR_ERROR;
+ int retval, index;
+
+ if (cfg_mode == 2) {
+ /* Preparation before conf_msi mbox cmd */
+ retval = 0;
+ if (!retval) {
+ /* Now, try to enable MSI-X interrupt mode */
+ retval = lpfc_sli4_enable_msix(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI-X mode */
+ phba->intr_type = MSIX;
+ intr_mode = 2;
+ }
+ }
+ }
+
+ /* Fallback to MSI if MSI-X initialization failed */
+ if (cfg_mode >= 1 && phba->intr_type == NONE) {
+ retval = lpfc_sli4_enable_msi(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI mode */
+ phba->intr_type = MSI;
+ intr_mode = 1;
+ }
+ }
+
+ /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ if (phba->intr_type == NONE) {
+ retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (!retval) {
+ /* Indicate initialization to INTx mode */
+ phba->intr_type = INTx;
+ intr_mode = 0;
+ for (index = 0; index < phba->cfg_fcp_eq_count;
+ index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
+ }
+ }
+ return intr_mode;
+}
+
+/**
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
+ **/
+static void
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
+{
+ /* Disable the currently initialized interrupt mode */
+ if (phba->intr_type == MSIX)
+ lpfc_sli4_disable_msix(phba);
+ else if (phba->intr_type == MSI)
+ lpfc_sli4_disable_msi(phba);
+ else if (phba->intr_type == INTx)
+ free_irq(phba->pcidev->irq, phba);
+
+ /* Reset interrupt management states */
+ phba->intr_type = NONE;
+ phba->sli.slistat.sli_intr = 0;
+
+ return;
+}
+
+/**
* lpfc_unset_hba - Unset SLI3 hba device initialization
* @phba: pointer to lpfc hba data structure.
*
@@ -3627,6 +6571,90 @@ lpfc_unset_hba(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
+
+ phba->pport->work_port_events = 0;
+
+ lpfc_sli4_hba_down(phba);
+
+ lpfc_sli4_disable_intr(phba);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+ int wait_cnt = 0;
+ LPFC_MBOXQ_t *mboxq;
+
+ lpfc_stop_hba_timers(phba);
+ phba->sli4_hba.intr_enable = 0;
+
+ /*
+ * Gracefully wait out the potential current outstanding asynchronous
+ * mailbox command.
+ */
+
+ /* First, block any pending async mailbox command from posted */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, trying to wait it out if we can */
+ while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ msleep(10);
+ if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+ break;
+ }
+ /* Forcefully release the outstanding mailbox command if timed out */
+ if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_lock_irq(&phba->hbalock);
+ mboxq = phba->sli.mbox_active;
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
+
+ /* Disable PCI subsystem interrupt */
+ lpfc_sli4_disable_intr(phba);
+
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
+
+ /* Stop the SLI4 device port */
+ phba->pport->work_port_events = 0;
+}
+
+/**
* lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
@@ -4127,6 +7155,446 @@ lpfc_io_resume_s3(struct pci_dev *pdev)
}
/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+ int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+ if (max_xri <= 100)
+ return 4;
+ else if (max_xri <= 256)
+ return 8;
+ else if (max_xri <= 512)
+ return 16;
+ else if (max_xri <= 1024)
+ return 32;
+ else
+ return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
+ int mcnt;
+
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
+
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1409 Failed to enable pci device.\n");
+ goto out_free_phba;
+ }
+
+ /* Set up SLI API function jump table for PCI-device group-1 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+ if (error)
+ goto out_disable_pci_dev;
+
+ /* Set up SLI-4 specific device PCI memory space */
+ error = lpfc_sli4_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1410 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
+
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1411 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Set up SLI-4 Specific device driver resources */
+ error = lpfc_sli4_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1412 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba,
+ phba->sli4_hba.max_cfg_param.max_xri);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1413 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s4;
+ }
+
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1414 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
+
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1415 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
+
+ /* Configure sysfs attributes */
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1416 Failed to allocate sysfs attr\n");
+ goto out_destroy_shost;
+ }
+
+ /* Now, trying to enable interrupt and bring up the device */
+ cfg_mode = phba->cfg_use_msi;
+ while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0426 Failed to enable interrupt.\n");
+ error = -ENODEV;
+ goto out_free_sysfs_attr;
+ }
+ /* Set up SLI-4 HBA */
+ if (lpfc_sli4_hba_setup(phba)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1421 Failed to set up hba\n");
+ error = -ENODEV;
+ goto out_disable_intr;
+ }
+
+ /* Send NOP mbx cmds for non-INTx mode active interrupt test */
+ if (intr_mode != 0)
+ mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+ LPFC_ACT_INTR_CNT);
+
+ /* Check active interrupts received only for MSI/MSI-X */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+ /* Log the current active interrupt mode */
+ phba->intr_mode = intr_mode;
+ lpfc_log_intr_mode(phba, intr_mode);
+ break;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0451 Configure interrupt mode (%d) "
+ "failed active interrupt test.\n",
+ intr_mode);
+ /* Unset the preivous SLI-4 HBA setup */
+ lpfc_sli4_unset_hba(phba);
+ /* Try next level of interrupt mode */
+ cfg_mode = --intr_mode;
+ }
+
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
+
+ return 0;
+
+out_disable_intr:
+ lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+ lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+ lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+ lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
+out_free_phba:
+ lpfc_hba_free(phba);
+ return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_vport **vports;
+ struct lpfc_hba *phba = vport->phba;
+ int i;
+
+ /* Mark the device unloading flag */
+ spin_lock_irq(&phba->hbalock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Free the HBA sysfs attributes */
+ lpfc_free_sysfs_attr(vport);
+
+ /* Release all the vports against this physical port */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+ fc_vport_terminate(vports[i]->fc_vport);
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Remove FC host and then SCSI host with the physical port */
+ fc_remove_host(shost);
+ scsi_remove_host(shost);
+
+ /* Perform cleanup on the physical port */
+ lpfc_cleanup(vport);
+
+ /*
+ * Bring down the SLI Layer. This step disables all interrupts,
+ * clears the rings, discards all mailbox commands, and resets
+ * the HBA FCoE function.
+ */
+ lpfc_debugfs_terminate(vport);
+ lpfc_sli4_hba_unset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ list_del_init(&vport->listentry);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+ * buffers are released to their corresponding pools here.
+ */
+ lpfc_scsi_free(phba);
+ lpfc_sli4_driver_resource_unset(phba);
+
+ /* Unmap adapter Control and Doorbell registers */
+ lpfc_sli4_pci_mem_unset(phba);
+
+ /* Release PCI resources and disable device's PCI function */
+ scsi_host_put(shost);
+ lpfc_disable_pci_dev(phba);
+
+ /* Finally, free the driver's device data structure */
+ lpfc_hba_free(phba);
+
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0298 PCI device Power Management suspend.\n");
+
+ /* Bring down the device */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ kthread_stop(phba->worker_thread);
+
+ /* Disable interrupt from device */
+ lpfc_sli4_disable_intr(phba);
+
+ /* Save device state to PCI config space */
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ uint32_t intr_mode;
+ int error;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0292 PCI device Power Management resume.\n");
+
+ /* Restore device state from PCI config space */
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ if (pdev->is_busmaster)
+ pci_set_master(pdev);
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0293 PM resume failed to start worker "
+ "thread: error=x%x.\n", error);
+ return error;
+ }
+
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0294 PM resume Failed to enable interrupt\n");
+ return -EIO;
+ } else
+ phba->intr_mode = intr_mode;
+
+ /* Restart HBA and bring it online */
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+
+ /* Log the current active interrupt mode */
+ lpfc_log_intr_mode(phba, phba->intr_mode);
+
+ return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+ return;
+}
+
+/**
* lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
@@ -4154,6 +7622,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
return -ENODEV;
switch (dev_id) {
+ case PCI_DEVICE_ID_TIGERSHARK:
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ rc = lpfc_pci_probe_one_s4(pdev, pid);
+ break;
default:
rc = lpfc_pci_probe_one_s3(pdev, pid);
break;
@@ -4181,6 +7653,9 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
case LPFC_PCI_DEV_LP:
lpfc_pci_remove_one_s3(pdev);
break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_pci_remove_one_s4(pdev);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1424 Invalid PCI device group: 0x%x\n",
@@ -4215,6 +7690,9 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
case LPFC_PCI_DEV_LP:
rc = lpfc_pci_suspend_one_s3(pdev, msg);
break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_suspend_one_s4(pdev, msg);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1425 Invalid PCI device group: 0x%x\n",
@@ -4248,6 +7726,9 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
case LPFC_PCI_DEV_LP:
rc = lpfc_pci_resume_one_s3(pdev);
break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_resume_one_s4(pdev);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1426 Invalid PCI device group: 0x%x\n",
@@ -4283,6 +7764,9 @@ lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
case LPFC_PCI_DEV_LP:
rc = lpfc_io_error_detected_s3(pdev, state);
break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_error_detected_s4(pdev, state);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1427 Invalid PCI device group: 0x%x\n",
@@ -4317,6 +7801,9 @@ lpfc_io_slot_reset(struct pci_dev *pdev)
case LPFC_PCI_DEV_LP:
rc = lpfc_io_slot_reset_s3(pdev);
break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_slot_reset_s4(pdev);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1428 Invalid PCI device group: 0x%x\n",
@@ -4346,6 +7833,9 @@ lpfc_io_resume(struct pci_dev *pdev)
case LPFC_PCI_DEV_LP:
lpfc_io_resume_s3(pdev);
break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_io_resume_s4(pdev);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1429 Invalid PCI device group: 0x%x\n",
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7f..7f5899b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a9767..516f480 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool. Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool. Creates and allocates kmalloc-backed mempools
* for LPFC_MBOXQ_t and lpfc_nodelist. Also allocates the VPI bitmask.
*
* Notes: Not interrupt-safe. Must be called with no locks held. If any
@@ -56,19 +58,30 @@
* -ENOMEM on failure (if any memory allocations fail)
**/
int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
{
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
int longs;
int i;
- phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
- phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev,
+ phba->cfg_sg_dma_buf_size,
+ phba->cfg_sg_dma_buf_size,
+ 0);
+ else
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev, phba->cfg_sg_dma_buf_size,
+ align, 0);
if (!phba->lpfc_scsi_dma_buf_pool)
goto fail;
phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
- LPFC_BPL_SIZE, 8,0);
+ LPFC_BPL_SIZE,
+ align, 0);
if (!phba->lpfc_mbuf_pool)
goto fail_free_dma_buf_pool;
@@ -97,23 +110,31 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
sizeof(struct lpfc_nodelist));
if (!phba->nlp_mem_pool)
goto fail_free_mbox_pool;
-
- phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
- LPFC_BPL_SIZE, 8, 0);
- if (!phba->lpfc_hbq_pool)
+ phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+ phba->pcidev,
+ LPFC_HDR_BUF_SIZE, align, 0);
+ if (!phba->lpfc_hrb_pool)
goto fail_free_nlp_mem_pool;
+ phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+ phba->pcidev,
+ LPFC_DATA_BUF_SIZE, align, 0);
+ if (!phba->lpfc_drb_pool)
+ goto fail_free_hbq_pool;
/* vpi zero is reserved for the physical port so add 1 to max */
longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
if (!phba->vpi_bmask)
- goto fail_free_hbq_pool;
+ goto fail_free_dbq_pool;
return 0;
+ fail_free_dbq_pool:
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
fail_free_hbq_pool:
- lpfc_sli_hbqbuf_free_all(phba);
- pci_pool_destroy(phba->lpfc_hbq_pool);
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
fail_free_nlp_mem_pool:
mempool_destroy(phba->nlp_mem_pool);
phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
}
/**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
*
* Returns: None
**/
void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
- LPFC_MBOXQ_t *mbox, *next_mbox;
- struct lpfc_dmabuf *mp;
int i;
+ struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
+ /* Free VPI bitmask memory */
kfree(phba->vpi_bmask);
+
+ /* Free HBQ pools */
lpfc_sli_hbqbuf_free_all(phba);
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
+
+ /* Free NLP memory pool */
+ mempool_destroy(phba->nlp_mem_pool);
+ phba->nlp_mem_pool = NULL;
+
+ /* Free mbox memory pool */
+ mempool_destroy(phba->mbox_mem_pool);
+ phba->mbox_mem_pool = NULL;
+
+ /* Free MBUF memory pool */
+ for (i = 0; i < pool->current_count; i++)
+ pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+ pool->elements[i].phys);
+ kfree(pool->elements);
+
+ pci_pool_destroy(phba->lpfc_mbuf_pool);
+ phba->lpfc_mbuf_pool = NULL;
+ /* Free DMA buffer memory pool */
+ pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+ phba->lpfc_scsi_dma_buf_pool = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *mbox, *next_mbox;
+ struct lpfc_dmabuf *mp;
+
+ /* Free memory used in mailbox queue back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -166,6 +233,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
+ /* Free memory used in mailbox cmpl list back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -175,8 +243,10 @@ lpfc_mem_free(struct lpfc_hba * phba)
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
-
+ /* Free the active mailbox command back to the mailbox memory pool */
+ spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
if (psli->mbox_active) {
mbox = psli->mbox_active;
mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@ lpfc_mem_free(struct lpfc_hba * phba)
psli->mbox_active = NULL;
}
- for (i = 0; i < pool->current_count; i++)
- pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
- pool->elements[i].phys);
- kfree(pool->elements);
-
- pci_pool_destroy(phba->lpfc_hbq_pool);
- mempool_destroy(phba->nlp_mem_pool);
- mempool_destroy(phba->mbox_mem_pool);
-
- pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
- pci_pool_destroy(phba->lpfc_mbuf_pool);
-
- phba->lpfc_hbq_pool = NULL;
- phba->nlp_mem_pool = NULL;
- phba->mbox_mem_pool = NULL;
- phba->lpfc_scsi_dma_buf_pool = NULL;
- phba->lpfc_mbuf_pool = NULL;
+ /* Free and destroy all the allocated memory pools */
+ lpfc_mem_free(phba);
/* Free the iocb lookup array */
kfree(psli->iocbq_lookup);
psli->iocbq_lookup = NULL;
+
+ return;
}
/**
@@ -305,7 +362,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
* lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
* pool along a non-DMA-mapped container for it.
*
* Notes: Not interrupt-safe. Must be called with no locks held.
@@ -323,7 +380,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
if (!hbqbp)
return NULL;
- hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+ hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
&hbqbp->dbuf.phys);
if (!hbqbp->dbuf.virt) {
kfree(hbqbp);
@@ -334,7 +391,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
}
/**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
@@ -348,12 +405,73 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
void
lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
{
- pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+ pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
kfree(hbqbp);
return;
}
/**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe. Must be called with no locks held.
+ *
+ * Returns:
+ * pointer to HBQ on success
+ * NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+ struct hbq_dmabuf *dma_buf;
+
+ dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+ if (!dma_buf)
+ return NULL;
+
+ dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+ &dma_buf->hbuf.phys);
+ if (!dma_buf->hbuf.virt) {
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ &dma_buf->dbuf.phys);
+ if (!dma_buf->dbuf.virt) {
+ pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+ dma_buf->hbuf.phys);
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->size = LPFC_BPL_SIZE;
+ return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+ pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+ pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+ kfree(dmab);
+ return;
+}
+
+/**
* lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77..6ba5a72 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a226c05..9af2db3 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -31,8 +31,10 @@
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -57,6 +59,8 @@ static char *dif_op_str[] = {
"SCSI_PROT_READ_CONVERT",
"SCSI_PROT_WRITE_CONVERT"
};
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -565,6 +569,8 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
}
iocb->ulpClass = CLASS3;
psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
}
@@ -572,6 +578,271 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
}
/**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_scsi_buf *psb, *next_psb;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+ list_for_each_entry_safe(psb, next_psb,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+ if (psb->cur_iocbq.sli4_xritag == xri) {
+ list_del(&psb->list);
+ psb->status = IOSTAT_SUCCESS;
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ lpfc_release_scsi_buf_s4(phba, psb);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb;
+ int index, status, bcnt = 0, rcnt = 0, rc = 0;
+ LIST_HEAD(sblist);
+
+ for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+ psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+ if (psb) {
+ /* Remove from SCSI buffer list */
+ list_del(&psb->list);
+ /* Add it to a local SCSI buffer list */
+ list_add_tail(&psb->list, &sblist);
+ if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ bcnt = rcnt;
+ rcnt = 0;
+ }
+ } else
+ /* A hole present in the XRI array, need to skip */
+ bcnt = rcnt;
+
+ if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+ /* End of XRI array for SCSI buffer, complete */
+ bcnt = rcnt;
+
+ /* Continue until collect up to a nembed page worth of sgls */
+ if (bcnt == 0)
+ continue;
+ /* Now, post the SCSI buffer list sgls as a block */
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ bcnt = 0;
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
+ }
+ return rc;
+}
+
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *psb;
+ struct sli4_sge *sgl;
+ IOCB_t *iocb;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ uint16_t iotag, last_xritag = NO_XRI;
+ int status = 0, index;
+ int bcnt;
+ int non_sequential_xri = 0;
+ int rc = 0;
+ LIST_HEAD(sblist);
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
+
+ /*
+ * Get memory from the pci pool to map the virt space to pci bus
+ * space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
+
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ kfree(psb);
+ break;
+ }
+
+ psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ if (last_xritag != NO_XRI
+ && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+ non_sequential_xri = 1;
+ } else
+ list_add_tail(&psb->list, &sblist);
+ last_xritag = psb->cur_iocbq.sli4_xritag;
+
+ index = phba->sli4_hba.scsi_xri_cnt++;
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_bpl = psb->data;
+ psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+ sizeof(struct fcp_cmnd));
+
+ /* Initialize local short-hand pointers. */
+ sgl = (struct sli4_sge *)psb->fcp_bpl;
+ pdma_phys_bpl = psb->dma_handle;
+ pdma_phys_fcp_cmd =
+ (psb->dma_handle + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ /* setting the BLP size to 2 * sizeof BDE may not be correct.
+ * We are setting the bpl to point to out sgl. An sgl's
+ * entries are 16 bytes, a bpl entries are 12 bytes.
+ */
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ iocb->ulpClass = CLASS3;
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ psb->dma_phys_bpl = pdma_phys_bpl;
+ phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+ if (non_sequential_xri) {
+ status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+ pdma_phys_bpl1,
+ psb->cur_iocbq.sli4_xritag);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ break;
+ }
+ }
+ if (bcnt) {
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
+ }
+
+ return bcnt + non_sequential_xri - rc;
+}
+
+/**
* lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
* @vport: The virtual port for which this call being executed.
* @num_to_allocate: The requested number of buffers to allocate.
@@ -638,6 +909,39 @@ lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
}
/**
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ unsigned long iflag = 0;
+
+ if (psb->status == IOSTAT_LOCAL_REJECT
+ && psb->result == IOERR_ABORT_REQUESTED) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ } else {
+
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ }
+}
+
+/**
* lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
@@ -1455,6 +1759,115 @@ out:
}
/**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct scatterlist *sgel = NULL;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ dma_addr_t physaddr;
+ uint32_t num_bde = 0;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+ int nseg;
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither. Start the lpfc command prep by
+ * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+ * data bde entry.
+ */
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+
+ nseg = scsi_dma_map(scsi_cmnd);
+ if (unlikely(!nseg))
+ return 1;
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl += 1;
+
+ lpfc_cmd->seg_cnt = nseg;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ /*
+ * The driver established a maximum scatter-gather segment count
+ * during probe that limits the number of sg elements in any
+ * single scsi command. Just run through the seg_cnt and format
+ * the sge's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
+ */
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+ physaddr = sg_dma_address(sgel);
+ dma_len = sg_dma_len(sgel);
+ bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ if ((num_bde + 1) == nseg)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ dma_offset += dma_len;
+ sgl++;
+ }
+ } else {
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized.
+ * all iocb memory resources are reused.
+ */
+ fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+ return 0;
+}
+
+/**
* lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -1590,6 +2003,22 @@ lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
}
/**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
* lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
@@ -2129,6 +2558,29 @@ lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
/**
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
* lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
@@ -2209,6 +2661,37 @@ lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
}
/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
* lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -2257,6 +2740,15 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
lpfc_scsi_prep_task_mgmt_cmd_s3;
phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s4;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1418 Invalid HBA PCI-device group: 0x%x\n",
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d..65dfc8b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@ struct lpfc_scsi_buf {
struct fcp_rsp *fcp_rsp;
struct ulp_bde64 *fcp_bpl;
+ dma_addr_t dma_phys_bpl;
+
/* cur_iocbq has phys of the dma-able buffer.
* Iotag is in here
*/
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e2d07d9..706bb22 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -29,9 +29,12 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -121,6 +124,76 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+ return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+ struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+ struct lpfc_sglq *sglq = NULL;
+ uint16_t adj_xri;
+ list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+ adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+ return sglq;
+}
+
+/**
* lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
@@ -298,6 +371,14 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
case CMD_GEN_REQUEST64_CR:
case CMD_GEN_REQUEST64_CX:
case CMD_XMIT_ELS_RSP64_CX:
+ case DSSCMD_IWRITE64_CR:
+ case DSSCMD_IWRITE64_CX:
+ case DSSCMD_IREAD64_CR:
+ case DSSCMD_IREAD64_CX:
+ case DSSCMD_INVALIDATE_DEK:
+ case DSSCMD_SET_KEK:
+ case DSSCMD_GET_KEK_ID:
+ case DSSCMD_GEN_XFER:
type = LPFC_SOL_IOCB;
break;
case CMD_ABORT_XRI_CN:
@@ -2629,6 +2710,56 @@ lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
return retval;
}
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+ uint32_t status;
+ int retval = 0;
+
+ /* Read the HBA Host Status Register */
+ status = lpfc_sli4_post_status_check(phba);
+
+ if (status) {
+ phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+ lpfc_sli_brdrestart(phba);
+ status = lpfc_sli4_post_status_check(phba);
+ }
+
+ /* Check to see if any errors occurred during init */
+ if (status) {
+ phba->link_state = LPFC_HBA_ERROR;
+ retval = 1;
+ } else
+ phba->sli4_hba.intr_enable = 0;
+
+ return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+ return phba->lpfc_sli_brdready(phba, mask);
+}
+
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
@@ -2863,7 +2994,66 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ uint16_t cfg_value;
+ uint8_t qindx;
+
+ /* Reset HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0295 Reset HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ /* perform board reset */
+ phba->fc_eventTag = 0;
+ phba->pport->fc_myDID = 0;
+ phba->pport->fc_prevDID = 0;
+
+ /* Turn off parity checking and serr during the physical reset */
+ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+ pci_write_config_word(phba->pcidev, PCI_COMMAND,
+ (cfg_value &
+ ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~(LPFC_PROCESS_LA);
+ phba->fcf.fcf_flag = 0;
+ /* Clean up the child queue list for the CQs */
+ list_del_init(&phba->sli4_hba.mbx_wq->list);
+ list_del_init(&phba->sli4_hba.els_wq->list);
+ list_del_init(&phba->sli4_hba.hdr_rq->list);
+ list_del_init(&phba->sli4_hba.dat_rq->list);
+ list_del_init(&phba->sli4_hba.mbx_cq->list);
+ list_del_init(&phba->sli4_hba.els_cq->list);
+ list_del_init(&phba->sli4_hba.rxq_cq->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Now physically reset the device */
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0389 Performing PCI function reset!\n");
+ /* Perform FCoE PCI function reset */
+ lpfc_pci_function_reset(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
@@ -2875,8 +3065,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
* The function does not guarantee completion of MBX_RESTART mailbox
* command before the return of this function.
**/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
{
MAILBOX_t *mb;
struct lpfc_sli *psli;
@@ -2915,7 +3105,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
lpfc_sli_brdreset(phba);
phba->pport->stopped = 0;
phba->link_state = LPFC_INIT_START;
-
+ phba->hba_flag = 0;
spin_unlock_irq(&phba->hbalock);
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2930,6 +3120,55 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+
+
+ /* Restart HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0296 Restart HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ lpfc_sli4_brdreset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ phba->pport->stopped = 0;
+ phba->link_state = LPFC_INIT_START;
+ phba->hba_flag = 0;
+ spin_unlock_irq(&phba->hbalock);
+
+ memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+ psli->stats_start = get_seconds();
+
+ lpfc_hba_down_post(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+ return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
* lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
@@ -3353,6 +3592,488 @@ lpfc_sli_hba_setup_error:
return rc;
}
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+ LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_dmabuf *mp;
+ struct lpfc_mqe *mqe;
+ uint32_t data_length;
+ int rc;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ mqe = &mboxq->u.mqe;
+ if (lpfc_dump_fcoe_param(phba, mboxq))
+ return -ENOMEM;
+
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):2571 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ if (rc) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return -EIO;
+ }
+ data_length = mqe->un.mb_words[5];
+ if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+ return -EIO;
+
+ lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ * On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command. In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint8_t *vpd, uint32_t *vpd_size)
+{
+ int rc = 0;
+ uint32_t dma_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_mqe *mqe;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * Get a DMA buffer for the vpd data resulting from the READ_REV
+ * mailbox command.
+ */
+ dma_size = *vpd_size;
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ dma_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, dma_size);
+
+ /*
+ * The SLI4 implementation of READ_REV conflicts at word1,
+ * bits 31:16 and SLI4 adds vpd functionality not present
+ * in SLI3. This code corrects the conflicts.
+ */
+ lpfc_read_rev(phba, mboxq);
+ mqe = &mboxq->u.mqe;
+ mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+ mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+ mqe->un.read_rev.word1 &= 0x0000FFFF;
+ bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+ bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc) {
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ return -EIO;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0380 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ /*
+ * The available vpd length cannot be bigger than the
+ * DMA buffer passed to the port. Catch the less than
+ * case and update the caller's size.
+ */
+ if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+ *vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+ lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+ uint8_t fcp_eqidx;
+
+ lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+ lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+ int rc;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mqe *mqe;
+ uint8_t *vpd;
+ uint32_t vpd_size;
+ uint32_t ftr_rsp = 0;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+ struct lpfc_vport *vport = phba->pport;
+ struct lpfc_dmabuf *mp;
+
+ /* Perform a PCI function reset to start from clean */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+
+ /* Check the HBA Host Status Register for readyness */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+ else {
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ /*
+ * Allocate a single mailbox container for initializing the
+ * port.
+ */
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /*
+ * Continue initialization with default values even if driver failed
+ * to read FCoE param config regions
+ */
+ if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "2570 Failed to read FCoE parameters \n");
+
+ /* Issue READ_REV to collect vpd and FW information. */
+ vpd_size = PAGE_SIZE;
+ vpd = kzalloc(vpd_size, GFP_KERNEL);
+ if (!vpd) {
+ rc = -ENOMEM;
+ goto out_free_mbox;
+ }
+
+ rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+ if (unlikely(rc))
+ goto out_free_vpd;
+
+ mqe = &mboxq->u.mqe;
+ if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+ &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+ (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0376 READ_REV Error. SLI Level %d "
+ "FCoE enabled %d\n",
+ bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+ bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+ /* Single threaded at this point, no need for lock */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_FCOE_SUPPORT;
+ spin_unlock_irq(&phba->hbalock);
+ /*
+ * Evaluate the read rev and vpd data. Populate the driver
+ * state with the results. If this routine fails, the failure
+ * is not fatal as the driver will use generic values.
+ */
+ rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+ if (unlikely(!rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0377 Error %d parsing vpd. "
+ "Using defaults.\n", rc);
+ rc = 0;
+ }
+
+ /* By now, we should determine the SLI revision, hard code for now */
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /*
+ * Discover the port's supported feature set and match it against the
+ * hosts requests.
+ */
+ lpfc_request_features(phba, mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ /*
+ * The port must support FCP initiator mode as this is the
+ * only mode running in the host.
+ */
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0378 No support for fcpi mode.\n");
+ ftr_rsp++;
+ }
+
+ /*
+ * If the port cannot support the host's requested features
+ * then turn off the global config parameters to disable the
+ * feature in the driver. This is not a fatal error.
+ */
+ if ((phba->cfg_enable_bg) &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (phba->max_vpi && phba->cfg_enable_npiv &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (ftr_rsp) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0379 Feature Mismatch Data: x%08x %08x "
+ "x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+ mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+ phba->cfg_enable_npiv, phba->max_vpi);
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ phba->cfg_enable_bg = 0;
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ phba->cfg_enable_npiv = 0;
+ }
+
+ /* These SLI3 features are assumed in SLI4 */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the port's service parameters. */
+ lpfc_read_sparam(phba, mboxq, vport->vpi);
+ mboxq->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ if (rc == MBX_SUCCESS) {
+ memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+ rc = 0;
+ }
+
+ /*
+ * This memory was allocated by the lpfc_read_sparam routine. Release
+ * it to the mbuf pool.
+ */
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ mboxq->context1 = NULL;
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0382 READ_SPARAM command failed "
+ "status %d, mbxStatus x%x\n",
+ rc, bf_get(lpfc_mqe_status, mqe));
+ phba->link_state = LPFC_HBA_ERROR;
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ if (phba->cfg_soft_wwnn)
+ u64_to_wwn(phba->cfg_soft_wwnn,
+ vport->fc_sparam.nodeName.u.wwn);
+ if (phba->cfg_soft_wwpn)
+ u64_to_wwn(phba->cfg_soft_wwpn,
+ vport->fc_sparam.portName.u.wwn);
+ memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+ /* Register SGL pool to the device using non-embedded mailbox command */
+ rc = lpfc_sli4_post_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0582 Error %d during sgl post operation", rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Register SCSI SGL pool to the device */
+ rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0383 Error %d during scsi sgl post opeation",
+ rc);
+ /* Some Scsi buffers were moved to the abort scsi list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Post the rpi header region to the device. */
+ rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0393 Error %d during rpi post operation\n",
+ rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+ /* Temporary initialization of lpfc_fip_flag to non-fip */
+ bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+ /* Set up all the queues to the device */
+ rc = lpfc_sli4_queue_setup(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0381 Error %d during queue setup.\n ", rc);
+ goto out_stop_timers;
+ }
+
+ /* Arm the CQs and then EQs on device */
+ lpfc_sli4_arm_cqeq_intr(phba);
+
+ /* Indicate device interrupt mode */
+ phba->sli4_hba.intr_enable = 1;
+
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Post receive buffers to the device */
+ lpfc_sli4_rb_setup(phba);
+
+ /* Start the ELS watchdog timer */
+ /*
+ * The driver for SLI4 is not yet ready to process timeouts
+ * or interrupts. Once it is, the comment bars can be removed.
+ */
+ /* mod_timer(&vport->els_tmofunc,
+ * jiffies + HZ * (phba->fc_ratov*2)); */
+
+ /* Start heart beat timer */
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ phba->hb_outstanding = 0;
+ phba->last_completion_time = jiffies;
+
+ /* Start error attention (ERATT) polling timer */
+ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+ /*
+ * The port is ready, set the host's link state to LINK_DOWN
+ * in preparation for link interrupts.
+ */
+ lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+ mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ /* Change driver state to LPFC_LINK_DOWN right before init link */
+ spin_lock_irq(&phba->hbalock);
+ phba->link_state = LPFC_LINK_DOWN;
+ spin_unlock_irq(&phba->hbalock);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (unlikely(rc != MBX_NOT_FINISHED)) {
+ kfree(vpd);
+ return 0;
+ } else
+ rc = -EIO;
+
+ /* Unset all the queues set up in this routine when error out */
+ if (rc)
+ lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+ if (rc)
+ lpfc_stop_hba_timers(phba);
+out_free_vpd:
+ kfree(vpd);
+out_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
/**
* lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3812,13 +4533,420 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
out_not_finished:
if (processing_queue) {
- pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+ pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
lpfc_mbox_cmpl_put(phba, pmbox);
}
return MBX_NOT_FINISHED;
}
/**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port. The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ * MBX_SUCCESS - mailbox posted successfully
+ * Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ int rc = MBX_SUCCESS;
+ unsigned long iflag;
+ uint32_t db_ready;
+ uint32_t mcqe_status;
+ uint32_t mbx_cmnd;
+ unsigned long timeout;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_mqe *mb = &mboxq->u.mqe;
+ struct lpfc_bmbx_create *mbox_rgn;
+ struct dma_address *dma_address;
+ struct lpfc_register bmbx_reg;
+
+ /*
+ * Only one mailbox can be active to the bootstrap mailbox region
+ * at a time and there is no queueing provided.
+ */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2532 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_POLL);
+ return MBXERR_ERROR;
+ }
+ /* The server grabs the token and owns it until release */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /*
+ * Initialize the bootstrap memory region to avoid stale data areas
+ * in the mailbox post. Then copy the caller's mailbox contents to
+ * the bmbx mailbox region.
+ */
+ mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+ memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+ lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+ sizeof(struct lpfc_mqe));
+
+ /* Post the high mailbox dma address to the port and wait for ready. */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /* Post the low mailbox dma address to the port. */
+ writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /*
+ * Read the CQ to ensure the mailbox has completed.
+ * If so, update the mailbox status so that the upper layers
+ * can complete the request normally.
+ */
+ lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+ sizeof(struct lpfc_mqe));
+ mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+ lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+ sizeof(struct lpfc_mcqe));
+ mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+ /* Prefix the mailbox status with range x4000 to note SLI4 status. */
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+ bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+ rc = MBXERR_ERROR;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+ " x%x x%x CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ bf_get(lpfc_mqe_status, mb),
+ mb->un.mb_words[0], mb->un.mb_words[1],
+ mb->un.mb_words[2], mb->un.mb_words[3],
+ mb->un.mb_words[4], mb->un.mb_words[5],
+ mb->un.mb_words[6], mb->un.mb_words[7],
+ mb->un.mb_words[8], mb->un.mb_words[9],
+ mb->un.mb_words[10], mb->un.mb_words[11],
+ mb->un.mb_words[12], mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+exit:
+ /* We are holding the token, no needed for lock when release */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint32_t flag)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ unsigned long iflags;
+ int rc;
+
+ /* Detect polling mode and jump to a handler */
+ if (!phba->sli4_hba.intr_enable) {
+ if (flag == MBX_POLL)
+ rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+ else
+ rc = -EIO;
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2541 Mailbox command x%x "
+ "(x%x) cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return rc;
+ } else if (flag == MBX_POLL) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2542 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return -EIO;
+ }
+
+ /* Now, interrupt mode asynchrous mailbox command */
+ rc = lpfc_mbox_cmd_check(phba, mboxq);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2543 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2544 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+
+ /* Put the mailbox command to the driver internal FIFO */
+ psli->slistat.mbox_busy++;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ lpfc_mbox_put(phba, mboxq);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0354 Mbox cmd issue - Enqueue Data: "
+ "x%x (x%x) x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state,
+ psli->sli_flag, MBX_NOWAIT);
+ /* Wake up worker thread to transport mailbox command from head */
+ lpfc_worker_wake_up(phba);
+
+ return MBX_BUSY;
+
+out_not_finished:
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *mboxq;
+ int rc = MBX_SUCCESS;
+ unsigned long iflags;
+ struct lpfc_mqe *mqe;
+ uint32_t mbx_cmnd;
+
+ /* Check interrupt mode before post async mailbox command */
+ if (unlikely(!phba->sli4_hba.intr_enable))
+ return MBX_NOT_FINISHED;
+
+ /* Check for mailbox command service token */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (unlikely(phba->sli.mbox_active)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0384 There is pending active mailbox cmd\n");
+ return MBX_NOT_FINISHED;
+ }
+ /* Take the mailbox command service token */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+ /* Get the next mailbox command from head of queue */
+ mboxq = lpfc_mbox_get(phba);
+
+ /* If no more mailbox command waiting for post, we're done */
+ if (!mboxq) {
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_SUCCESS;
+ }
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check device readiness for posting mailbox command */
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc))
+ /* Driver clean routine will clean up pending mailbox */
+ goto out_not_finished;
+
+ /* Prepare the mbox command to be posted */
+ mqe = &mboxq->u.mqe;
+ mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+ /* Start timer for the mbox_tmo and log some mailbox post messages */
+ mod_timer(&psli->mbox_tmo, (jiffies +
+ (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state, psli->sli_flag);
+
+ if (mbx_cmnd != MBX_HEARTBEAT) {
+ if (mboxq->vport) {
+ lpfc_debugfs_disc_trc(mboxq->vport,
+ LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX Send vport: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ } else {
+ lpfc_debugfs_disc_trc(phba->pport,
+ LPFC_DISC_TRC_MBOX,
+ "MBOX Send: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ }
+ }
+ psli->slistat.mbox_cmd++;
+
+ /* Post the mailbox command to the port */
+ rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2533 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_NOWAIT);
+ goto out_not_finished;
+ }
+
+ return rc;
+
+out_not_finished:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ /* Release the token */
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+ return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s3;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s4;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1420 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ return 0;
+}
+
+/**
* __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -4501,28 +5629,42 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
/* Return any active mbox cmds */
del_timer_sync(&psli->mbox_tmo);
- spin_lock_irqsave(&phba->hbalock, flags);
- spin_lock(&phba->pport->work_port_lock);
+ spin_lock_irqsave(&phba->pport->work_port_lock, flags);
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
- spin_unlock(&phba->pport->work_port_lock);
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
- /* Return any pending or completed mbox cmds */
- list_splice_init(&phba->sli.mboxq, &completions);
- if (psli->mbox_active) {
- list_add_tail(&psli->mbox_active->list, &completions);
- psli->mbox_active = NULL;
- psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- }
- list_splice_init(&phba->sli.mboxq_cmpl, &completions);
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ return 1;
+}
+
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+ /* Stop the SLI4 device port */
+ lpfc_stop_port(phba);
+
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
- pmb->mb.mbxStatus = MBX_NOT_FINISHED;
- if (pmb->mbox_cmpl)
- pmb->mbox_cmpl(phba,pmb);
- }
return 1;
}
@@ -4853,7 +5995,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
iabt = &abtsiocbp->iocb;
iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
iabt->un.acxri.abortContextTag = icmd->ulpContext;
- iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+ else
+ iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
iabt->ulpLe = 1;
iabt->ulpClass = icmd->ulpClass;
@@ -4869,7 +6014,7 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
"abort cmd iotag x%x\n",
iabt->un.acxri.abortContextTag,
iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
- retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+ retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
if (retval)
__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -5052,7 +6197,10 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
cmd = &iocbq->iocb;
abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
- abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+ else
+ abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
abtsiocb->iocb.ulpLe = 1;
abtsiocb->iocb.ulpClass = cmd->ulpClass;
abtsiocb->vport = phba->pport;
@@ -5064,7 +6212,8 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
/* Setup callback routine and issue the command. */
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
- ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+ ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+ abtsiocb, 0);
if (ret_val == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
errcnt++;
@@ -5145,7 +6294,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
**/
int
lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
+ uint32_t ring_number,
struct lpfc_iocbq *piocb,
struct lpfc_iocbq *prspiocbq,
uint32_t timeout)
@@ -5176,7 +6325,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
readl(phba->HCregaddr); /* flush */
}
- retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+ retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
if (retval == IOCB_SUCCESS) {
timeout_req = timeout * HZ;
timeleft = wait_event_timeout(done_q,
@@ -5385,6 +6534,58 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+ uint32_t uerr_sta_hi, uerr_sta_lo;
+ uint32_t onlnreg0, onlnreg1;
+
+ /* For now, use the SLI4 device internal unrecoverable error
+ * registers for error attention. This can be changed later.
+ */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+ uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerr_sta_lo || uerr_sta_hi) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1423 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerr_sta_lo, uerr_sta_hi,
+ onlnreg0, onlnreg1);
+ /* TEMP: as the driver error recover logic is not
+ * fully developed, we just log the error message
+ * and the device error attention action is now
+ * temporarily disabled.
+ */
+ return 0;
+ phba->work_status[0] = uerr_sta_lo;
+ phba->work_status[1] = uerr_sta_hi;
+ spin_lock_irq(&phba->hbalock);
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/**
* lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
@@ -5434,6 +6635,10 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
/* Read chip Host Attention (HA) register */
ha_copy = lpfc_sli_eratt_read(phba);
break;
+ case LPFC_SLI_REV4:
+ /* Read devcie Uncoverable Error (UERR) registers */
+ ha_copy = lpfc_sli4_eratt_read(phba);
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0299 Invalid SLI revision (%d)\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 8839386..e6c88ee 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@ typedef enum _lpfc_ctx_cmd {
LPFC_CTX_HOST
} lpfc_ctx_cmd;
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+ uint8_t hw_status;
+ uint8_t bfield;
+#define LPFC_XB 0x1
+#define LPFC_PV 0x2
+ uint8_t priority;
+ uint8_t reserved;
+};
+
/* This structure is used to handle IOCB requests / responses */
struct lpfc_iocbq {
/* lpfc_iocbqs are used in double linked lists */
struct list_head list;
struct list_head clist;
uint16_t iotag; /* pre-assigned IO tag */
- uint16_t rsvd1;
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
IOCB_t iocb; /* IOCB cmd */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@ struct lpfc_iocbq {
struct lpfc_iocbq *);
void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
-
+ struct lpfc_sli4_rspiocb_info sli4_info;
};
#define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@ struct lpfc_iocbq {
typedef struct lpfcMboxq {
/* MBOXQs are used in single linked lists */
struct list_head list; /* ptr to next mailbox command */
- MAILBOX_t mb; /* Mailbox cmd */
- struct lpfc_vport *vport;/* virutal port pointer */
+ union {
+ MAILBOX_t mb; /* Mailbox cmd */
+ struct lpfc_mqe mqe;
+ } u;
+ struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
uint8_t mbox_flag;
-
+ struct lpfc_mcqe mcqe;
+ struct lpfc_mbx_nembed_sge_virt *sge_array;
} LPFC_MBOXQ_t;
#define MBX_POLL 1 /* poll mailbox till command done, then
@@ -234,6 +248,7 @@ struct lpfc_sli {
#define LPFC_PROCESS_LA 0x400 /* Able to process link attention */
#define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */
#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK 0x2000 /* Async mailbox is blocked */
struct lpfc_sli_ring ring[LPFC_MAX_RING];
int fcp_ring; /* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@ struct lpfc_sli {
#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60 /* Sec tmo for outstanding mbox
+ command */
#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
* or erase cmds. This is especially
* long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 0000000..5196b466
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT 100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
+#define LPFC_GET_QE_REL_INT 32
+#define LPFC_RPI_LOW_WATER_MARK 10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT 254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX 8
+#define LPFC_SP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_MIN 1
+#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX 32
+#define LPFC_SP_WQN_DEF 1
+#define LPFC_FP_WQN_DEF 4
+#define LPFC_FP_WQN_MIN 1
+#define LPFC_FP_WQN_MAX (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX 0
+#define LPFC_FCOE_FCF_GET_FIRST 0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE 0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3 0xFF
+#define LPFC_FCOE_FCF_MAC4 0xFF
+#define LPFC_FCOE_FCF_MAC5 0xFE
+#define LPFC_FCOE_FCF_MAP0 0x0E
+#define LPFC_FCOE_FCF_MAP1 0xFC
+#define LPFC_FCOE_FCF_MAP2 0x00
+#define LPFC_FCOE_MAX_RCV_SIZE 0x5AC
+#define LPFC_FCOE_FKA_ADV_PER 0
+#define LPFC_FCOE_FIP_PRIORITY 0x80
+
+enum lpfc_sli4_queue_type {
+ LPFC_EQ,
+ LPFC_GCQ,
+ LPFC_MCQ,
+ LPFC_WCQ,
+ LPFC_RCQ,
+ LPFC_MQ,
+ LPFC_WQ,
+ LPFC_HRQ,
+ LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+ LPFC_NONE,
+ LPFC_MBOX,
+ LPFC_FCP,
+ LPFC_ELS,
+ LPFC_USOL
+};
+
+union sli4_qe {
+ void *address;
+ struct lpfc_eqe *eqe;
+ struct lpfc_cqe *cqe;
+ struct lpfc_mcqe *mcqe;
+ struct lpfc_wcqe_complete *wcqe_complete;
+ struct lpfc_wcqe_release *wcqe_release;
+ struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+ struct lpfc_rcqe_complete *rcqe_complete;
+ struct lpfc_mqe *mqe;
+ union lpfc_wqe *wqe;
+ struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+ struct list_head list;
+ enum lpfc_sli4_queue_type type;
+ enum lpfc_sli4_queue_subtype subtype;
+ struct lpfc_hba *phba;
+ struct list_head child_list;
+ uint32_t entry_count; /* Number of entries to support on the queue */
+ uint32_t entry_size; /* Size of each queue entry. */
+ uint32_t queue_id; /* Queue ID assigned by the hardware */
+ struct list_head page_list;
+ uint32_t page_count; /* Number of pages allocated for this queue */
+
+ uint32_t host_index; /* The host's index for putting or getting */
+ uint32_t hba_index; /* The last known hba index for get or put */
+ union sli4_qe qe[1]; /* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+ struct list_head list;
+ union {
+ struct lpfc_mcqe mcqe_cmpl;
+ struct lpfc_acqe_link acqe_link;
+ struct lpfc_acqe_fcoe acqe_fcoe;
+ struct lpfc_acqe_dcbx acqe_dcbx;
+ struct lpfc_rcqe rcqe_cmpl;
+ struct sli4_wcqe_xri_aborted wcqe_axri;
+ } cqe;
+};
+
+struct lpfc_sli4_link {
+ uint8_t speed;
+ uint8_t duplex;
+ uint8_t status;
+ uint8_t physical;
+ uint8_t fault;
+};
+
+struct lpfc_fcf {
+ uint8_t fabric_name[8];
+ uint8_t mac_addr[6];
+ uint16_t fcf_indx;
+ uint16_t fcfi;
+ uint32_t fcf_flag;
+#define FCF_AVAILABLE 0x01 /* FCF available for discovery */
+#define FCF_REGISTERED 0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED 0x04 /* FCF discovery started */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE 0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN 0x20 /* Use the vlan id specified */
+ uint32_t priority;
+ uint32_t addr_mode;
+ uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION 1
+#define LPFC_REGION23_LAST_REC 0xff
+struct lpfc_fip_param_hdr {
+ uint8_t type;
+#define FCOE_PARAM_TYPE 0xA0
+ uint8_t length;
+#define FCOE_PARAM_LENGTH 2
+ uint8_t parm_version;
+#define FIPP_VERSION 0x01
+ uint8_t parm_flags;
+#define lpfc_fip_param_hdr_fipp_mode_SHIFT 6
+#define lpfc_fip_param_hdr_fipp_mode_MASK 0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD parm_flags
+#define FIPP_MODE_ON 0x2
+#define FIPP_MODE_OFF 0x0
+#define FIPP_VLAN_VALID 0x1
+};
+
+struct lpfc_fcoe_params {
+ uint8_t fc_map[3];
+ uint8_t reserved1;
+ uint16_t vlan_tag;
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+ uint8_t type;
+#define FCOE_CONN_TBL_TYPE 0xA1
+ uint8_t length; /* words */
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+ uint16_t flags;
+#define FCFCNCT_VALID 0x0001
+#define FCFCNCT_BOOT 0x0002
+#define FCFCNCT_PRIMARY 0x0004 /* if not set, Secondary */
+#define FCFCNCT_FBNM_VALID 0x0008
+#define FCFCNCT_SWNM_VALID 0x0010
+#define FCFCNCT_VLAN_VALID 0x0020
+#define FCFCNCT_AM_VALID 0x0040
+#define FCFCNCT_AM_PREFERRED 0x0080 /* if not set, AM Required */
+#define FCFCNCT_AM_SPMA 0x0100 /* if not set, FPMA */
+
+ uint16_t vlan_tag;
+ uint8_t fabric_name[8];
+ uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+ struct list_head list;
+ struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox. This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address dma_address;
+ void *avirt;
+ dma_addr_t aphys;
+ uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 4
+#define LPFC_EQE_SIZE_16B 16
+#define LPFC_CQE_SIZE 16
+#define LPFC_WQE_SIZE 64
+#define LPFC_MQE_SIZE 256
+#define LPFC_RQE_SIZE 8
+
+#define LPFC_EQE_DEF_COUNT 1024
+#define LPFC_CQE_DEF_COUNT 256
+#define LPFC_WQE_DEF_COUNT 64
+#define LPFC_MQE_DEF_COUNT 16
+#define LPFC_RQE_DEF_COUNT 512
+
+#define LPFC_QUEUE_NOARM false
+#define LPFC_QUEUE_REARM true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+ uint16_t max_xri;
+ uint16_t xri_base;
+ uint16_t xri_used;
+ uint16_t max_rpi;
+ uint16_t rpi_base;
+ uint16_t rpi_used;
+ uint16_t max_vpi;
+ uint16_t vpi_base;
+ uint16_t vpi_used;
+ uint16_t max_vfi;
+ uint16_t vfi_base;
+ uint16_t vfi_used;
+ uint16_t max_fcfi;
+ uint16_t fcfi_base;
+ uint16_t fcfi_used;
+ uint16_t max_eq;
+ uint16_t max_rq;
+ uint16_t max_cq;
+ uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+ uint32_t idx;
+ struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+ void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR0, config space registers */
+ void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR1, control registers */
+ void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR2, doorbell registers */
+ /* BAR0 PCI config space register memory map */
+ void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+ void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+ void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+ void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR 0xFFFFFFFF
+ void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+ /* BAR1 FCoE function CSR register memory map */
+ void __iomem *STAregaddr; /* Address to HST_STATE register */
+ void __iomem *ISRregaddr; /* Address to HST_ISR register */
+ void __iomem *IMRregaddr; /* Address to HST_IMR register */
+ void __iomem *ISCRregaddr; /* Address to HST_ISCR register */
+ /* BAR2 VF-0 doorbell register memory map */
+ void __iomem *RQDBregaddr; /* Address to RQ_DOORBELL register */
+ void __iomem *WQDBregaddr; /* Address to WQ_DOORBELL register */
+ void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+ void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
+ void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
+
+ struct msix_entry *msix_entries;
+ uint32_t cfg_eqn;
+ struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+ /* Pointers to the constructed SLI4 queues */
+ struct lpfc_queue **fp_eq; /* Fast-path event queue */
+ struct lpfc_queue *sp_eq; /* Slow-path event queue */
+ struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+ struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+ struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+ struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+ struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+ struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+ struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+ struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+ struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+ /* Setup information for various queue parameters */
+ int eq_esize;
+ int eq_ecount;
+ int cq_esize;
+ int cq_ecount;
+ int wq_esize;
+ int wq_ecount;
+ int mq_esize;
+ int mq_ecount;
+ int rq_esize;
+ int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC 10000
+#define LPFC_FP_EQ_MAX_INTR_SEC 10000
+
+ uint32_t intr_enable;
+ struct lpfc_bmbx bmbx;
+ struct lpfc_max_cfg_param max_cfg_param;
+ uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+ uint16_t next_rpi;
+ uint16_t scsi_xri_max;
+ uint16_t scsi_xri_cnt;
+ struct list_head lpfc_free_sgl_list;
+ struct list_head lpfc_sgl_list;
+ struct lpfc_sglq **lpfc_els_sgl_array;
+ struct list_head lpfc_abts_els_sgl_list;
+ struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+ struct list_head lpfc_abts_scsi_buf_list;
+ uint32_t total_sglq_bufs;
+ struct lpfc_sglq **lpfc_sglq_active_list;
+ struct list_head lpfc_rpi_hdr_list;
+ unsigned long *rpi_bmask;
+ uint16_t rpi_count;
+ struct lpfc_sli4_flags sli4_flags;
+ struct list_head sp_rspiocb_work_queue;
+ struct list_head sp_cqe_event_pool;
+ struct list_head sp_asynce_work_queue;
+ struct list_head sp_fcp_xri_aborted_work_queue;
+ struct list_head sp_els_xri_aborted_work_queue;
+ struct list_head sp_unsol_work_queue;
+ struct lpfc_sli4_link link_state;
+ spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+ spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+ GEN_BUFF_TYPE,
+ SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+ /* lpfc_sglqs are used in double linked lists */
+ struct list_head list;
+ struct list_head clist;
+ enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+ uint16_t iotag; /* pre-assigned IO tag */
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
+ struct sli4_sge *sgl; /* pre-assigned SGL */
+ void *virt; /* virtual address. */
+ dma_addr_t phys; /* physical address */
+};
+
+struct lpfc_rpi_hdr {
+ struct list_head list;
+ uint32_t len;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t page_count;
+ uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+ uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+ struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+ uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56..59e67f7 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -89,6 +91,8 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
vpi = 0;
else
set_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used++;
spin_unlock_irq(&phba->hbalock);
return vpi;
}
@@ -96,8 +100,12 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
static void
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
{
+ if (vpi == 0)
+ return;
spin_lock_irq(&phba->hbalock);
clear_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used--;
spin_unlock_irq(&phba->hbalock);
}
@@ -308,6 +316,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
goto error_out;
}
+ /*
+ * In SLI4, the vpi must be activated before it can be used
+ * by the port.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_sli4_init_vpi(phba, vpi);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ "1838 Failed to INIT_VPI on vpi %d "
+ "status %d\n", vpi, rc);
+ rc = VPORT_NORESOURCES;
+ lpfc_free_vpi(phba, vpi);
+ goto error_out;
+ }
+ }
/* Assign an unused board number */
if ((instance = lpfc_get_instance()) < 0) {
OpenPOWER on IntegriCloud