Merge tag 'iio-for-3.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new functionality for IIO in the 3.13 cycle - with bug fixes for first set.

This is a small, mainly to get a couple of compile bug related fixes into
the tree ASAP.

New device support:
1) Add ad5446 dac support to the ad5641 driver.

New functionality and cleanups:
1) Optional power supply regulators for the st pressure sensors drivers using
   the new optional regulator interface.
2) Bit of tidying up of naming in the sysfs trigger.

Bug fixes from the previous series:
1) Missing select IIO_BUFFER for ti_am335x_adc
2) Drop a bonus bracket in iio-trig-bfin-timmer

7 files changed, 60 insertions, 9 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 8b88518..2209f28 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -177,6 +177,7 @@ config TI_ADC081C
 config TI_AM335X_ADC
 	tristate "TI's AM335X ADC driver"
 	depends on MFD_TI_AM335X_TSCADC
+	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for Texas Instruments ADC
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 3c6a78a..f378ca8 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -57,7 +57,7 @@ config AD5446
 	  Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
 	  AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
 	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
-	  AD5620, AD5621, AD5622, AD5640, AD5660, AD5662 DACs.
+	  AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5446.
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index 6dcb6d9..8e28d36 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -330,6 +330,7 @@ enum ad5446_supported_spi_device_ids {
 	ID_AD5601,
 	ID_AD5611,
 	ID_AD5621,
+	ID_AD5641,
 	ID_AD5620_2500,
 	ID_AD5620_1250,
 	ID_AD5640_2500,
@@ -392,6 +393,10 @@ static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
 		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.write = ad5446_write,
 	},
+	[ID_AD5641] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.write = ad5446_write,
+	},
 	[ID_AD5620_2500] = {
 		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 2500,
@@ -446,6 +451,7 @@ static const struct spi_device_id ad5446_spi_ids[] = {
 	{"ad5601", ID_AD5601},
 	{"ad5611", ID_AD5611},
 	{"ad5621", ID_AD5621},
+	{"ad5641", ID_AD5641},
 	{"ad5620-2500", ID_AD5620_2500}, /* AD5620/40/60: */
 	{"ad5620-1250", ID_AD5620_1250}, /* part numbers may look differently */
 	{"ad5640-2500", ID_AD5640_2500},
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 2da411b..58083f9 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -23,6 +23,7 @@
 #include <linux/iio/sysfs.h>
 #include <linux/iio/trigger.h>
 #include <linux/iio/buffer.h>
+#include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
 
 #include <linux/iio/common/st_sensors.h>
@@ -313,6 +314,40 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
 #define ST_PRESS_TRIGGER_OPS NULL
 #endif
 
+static void st_press_power_enable(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	int err;
+
+	/* Regulators not mandatory, but if requested we should enable them. */
+	pdata->vdd = devm_regulator_get_optional(&indio_dev->dev, "vdd");
+	if (!IS_ERR(pdata->vdd)) {
+		err = regulator_enable(pdata->vdd);
+		if (err != 0)
+			dev_warn(&indio_dev->dev,
+				 "Failed to enable specified Vdd supply\n");
+	}
+
+	pdata->vdd_io = devm_regulator_get_optional(&indio_dev->dev, "vddio");
+	if (!IS_ERR(pdata->vdd_io)) {
+		err = regulator_enable(pdata->vdd_io);
+		if (err != 0)
+			dev_warn(&indio_dev->dev,
+				 "Failed to enable specified Vdd_IO supply\n");
+	}
+}
+
+static void st_press_power_disable(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *pdata = iio_priv(indio_dev);
+
+	if (!IS_ERR(pdata->vdd))
+		regulator_disable(pdata->vdd);
+
+	if (!IS_ERR(pdata->vdd_io))
+		regulator_disable(pdata->vdd_io);
+}
+
 int st_press_common_probe(struct iio_dev *indio_dev,
 				struct st_sensors_platform_data *plat_data)
 {
@@ -323,6 +358,8 @@ int st_press_common_probe(struct iio_dev *indio_dev,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &press_info;
 
+	st_press_power_enable(indio_dev);
+
 	err = st_sensors_check_device_support(indio_dev,
 					      ARRAY_SIZE(st_press_sensors),
 					      st_press_sensors);
@@ -380,6 +417,8 @@ void st_press_common_remove(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *pdata = iio_priv(indio_dev);
 
+	st_press_power_disable(indio_dev);
+
 	iio_device_unregister(indio_dev);
 	if (pdata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index effcd0a..15e3b85 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -23,7 +23,7 @@ struct iio_sysfs_trig {
 };
 
 static LIST_HEAD(iio_sysfs_trig_list);
-static DEFINE_MUTEX(iio_syfs_trig_list_mut);
+static DEFINE_MUTEX(iio_sysfs_trig_list_mut);
 
 static int iio_sysfs_trigger_probe(int id);
 static ssize_t iio_sysfs_trig_add(struct device *dev,
@@ -135,7 +135,7 @@ static int iio_sysfs_trigger_probe(int id)
 	struct iio_sysfs_trig *t;
 	int ret;
 	bool foundit = false;
-	mutex_lock(&iio_syfs_trig_list_mut);
+	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
 			foundit = true;
@@ -169,7 +169,7 @@ static int iio_sysfs_trigger_probe(int id)
 		goto out2;
 	list_add(&t->l, &iio_sysfs_trig_list);
 	__module_get(THIS_MODULE);
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return 0;
 
 out2:
@@ -177,7 +177,7 @@ out2:
 free_t:
 	kfree(t);
 out1:
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return ret;
 }
 
@@ -185,14 +185,14 @@ static int iio_sysfs_trigger_remove(int id)
 {
 	bool foundit = false;
 	struct iio_sysfs_trig *t;
-	mutex_lock(&iio_syfs_trig_list_mut);
+	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
 			foundit = true;
 			break;
 		}
 	if (!foundit) {
-		mutex_unlock(&iio_syfs_trig_list_mut);
+		mutex_unlock(&iio_sysfs_trig_list_mut);
 		return -EINVAL;
 	}
 
@@ -202,7 +202,7 @@ static int iio_sysfs_trigger_remove(int id)
 	list_del(&t->l);
 	kfree(t);
 	module_put(THIS_MODULE);
-	mutex_unlock(&iio_syfs_trig_list_mut);
+	mutex_unlock(&iio_sysfs_trig_list_mut);
 	return 0;
 }
 
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index ebb189c..26e1ca0 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -91,7 +91,7 @@ static ssize_t iio_bfin_tmr_frequency_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	if (val > 100000) {
+	if (val > 100000)
 		return -EINVAL;
 
 	enabled = get_enabled_gptimers() & st->t->bit;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index e732fda..3c005eb 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -16,6 +16,7 @@
 #include <linux/irqreturn.h>
 #include <linux/iio/trigger.h>
 #include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/st_sensors_pdata.h>
 
@@ -201,6 +202,8 @@ struct st_sensors {
  * @trig: The trigger in use by the core driver.
  * @sensor: Pointer to the current sensor struct in use.
  * @current_fullscale: Maximum range of measure by the sensor.
+ * @vdd: Pointer to sensor's Vdd power supply
+ * @vdd_io: Pointer to sensor's Vdd-IO power supply
  * @enabled: Status of the sensor (false->off, true->on).
  * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
  * @buffer_data: Data used by buffer part.
@@ -216,6 +219,8 @@ struct st_sensor_data {
 	struct iio_trigger *trig;
 	struct st_sensors *sensor;
 	struct st_sensor_fullscale_avl *current_fullscale;
+	struct regulator *vdd;
+	struct regulator *vdd_io;
 
 	bool enabled;
 	bool multiread_bit;